Agricultural Irrigation Products Catalog

2014 Agricultural Irrigation s Catalog

Air Relief Valve 7 Pipe, Aluminum 4142, 44, 46 Pipe, NuFlex Poly 40 Ball & Socket 9499 Pipe, PVC Underground 4849 Band & Hook/Latch 112115 Pipe, Towline 26 BandIt Tool & Accessories 3132 Pipe, Vacuum 47 ButtWeld Fittings 163 Pitot Tube 162 Pivot Parts 139148 Cam Loc 100101 Pressure Guage 149 Chain 28 Pressure Relief Valve 7 Clamp, Horseshoe 117 Primer Valve 195 Clamp, Ringlock 116 Primer, Hand 196198 Clamps, Hose 32, 3637 Primer, Intake Manifold 199 Cone, Concentric 121, 163 Primer, Power 196 Cone, Eccentric 122, 163 Pump Accessories 188201 Coupler, Dresser 11, 15, 189 Pumps 174187 Coupler, Ringlock 8788 PVC Cement, Primer & Lube 14 Coupler, Sprinkler 8990 Coupler, Twistlock 90 Reducer 17, 21, 108109 Coupler, Underground 13 Repair Coupler 1011 Coupling, Riser Valve 92 Rings, Weldon/Bolton 116 Coupling, Saddle 92 Riser Valve J 5 Coupling, Alum & Steel 154 Riser Valve L 5 Riser Valve Tee 89, 12 Disc, Alum/Steel 117118 Riser, Sprinkler 27 Drains 26, 155 Rodent Door 23 Draw Band 14 Saddle 12 Elbow, Suction 190 Screen Parts 192194 Elbow, Surface 102104 Screen, Footvalve 189190 Elbow, Underground 17, 19, 22 Screen, SelfCleaning 191 Elbow, Weldon 103, 163 Screen, Suction 190192 End Cap 18, 20, 111 Siphon Tubes 40 End Plug 18, 110111 Sprinkler 6165 Sprinkler Leveler & Elbow 33 Fiberglass Tape (PowrWrap) 10) Sprinkler Nozzle 69 Filter, Inline Screen 148 Fittings, Hose 2931, 5960, 95, 99 T Pipe 4 Fittings, Malleable 156162 Tee, Surface 104107 Fittings, PVC 1923 Tee, Underground 16, 20, 22 Fittings, Surface 46, 102111 Tee, Weldon 105, 163 Fittings, Undergound 423 Telescope 123 Flanges 118120 Towline 2628 Trailers 58 Gasket 11, 14, 166169 Tubing, Steel & Aluminum 43 Gate Sock & Clip 52 Gates 5051 Valve Opener 152 Generator 202 Valve Stub & Accessories 150153 Valve Tee, Independent 152153 Hose & Accessories 2937, 5860 Valve, Alfalfa 129 Hose Pull Coupler 60 Valve, Ball 125 Hose Splice 2931, 59 Valve, Check 131133 Valve, Chemigation 136 Increaser 109 Valve, Combo 133 Industrial Groove 91 Valve, Gate 124125, 129 Valve, Inline Butterfly 134135 J Pipe 46 Valve, Low Pressure 130 Valve, Surge Gate.. 131 L Pipe 46 Valve, Wafer Butterfly 125128 Volume Gun 6668, 7083 Motor, Electric 202 Volume Gun Stand 5556 Murphy Switch 200201 Water Meter 137138 Nipples, TOE 153 Wheeline 33 Nipples, TBE 170172 Z Pipe 46 Index

Company Policy CLAIMS Claims for shortages, defective or damaged goods must be made within five (5) days from receipt of shipment. Damages occurring "in transit" are the responsibility of the freight company and should be noted on the bill of lading when the shipment is received. Submit a claim directly to the carrier as soon as possible. RETURNS AND CANCELLATIONS Merchandise may be returned only at the option of SCHUMACHER IRRIGATION, INC. Merchandise authorized for return 1) must be returned freight prepaid, 2) must be in new resaleable condition, and 3) is subject to a 15% restocking charge 4) custombuilt fittings cannot be returned, unless approved by a Schumacher representative Credit will be issued to your account when the items are received back at our office. Orders may be cancelled at the option of SCHUMACHER IRRIGATION, INC. If the request is received prior to shipment. Nonstandard/Custombuilt items may not be cancelled without substantial penalty after material is "in process of manufacture." GUARANTEE All products are guaranteed against defect due to faulty workmanship or material. This guarantee is void when merchandise is used for purposes other than that for which it was designed or if improper pressures are maintained. LIABILITY SCHUMACHER IRRIGATION, INC. is not responsible for delays and losses beyond our control or for losses or damages due to application of equipment for uses other than that for which it is designed or for operation under pressures not recommended. Suitability of the merchandise for the job for which it is sold is the sole responsibility of the buyer regardless of advise or recommendations by the seller. SCHUMACHER IRRIGATION, INC. assumes no responsibility for system design or for any damages or losses due to lack of minimum water requirements for crops being irrigated with SCHUMACHER IRRIGATION, INC. equipment. 18002463685 or 14022463685

BILLING AND LATE CHARGES Company Policy Policy & Warranties All payments are due on the 10th of the following month from the date of the invoice. Account statements are sent at the end of each month. After 30 days the principal is subject to an annual finance charge of 18%. FREIGHT All prices are F.O.B. Platte Center, Nebraska. Standard items are usually shipped the same day the order is received. Shipments via UPS, Speedee, and FedEx are shipped prepaid and the freight charge is added to your order. Shipments via common carrier are shipped freight collect. Freight charges on pipe delivered by our driver: $3.00 per loaded mile. Deliveries by car / pickup without trailer are $1.00 per loaded mile. Copyright 2014 Schumacher Irrigation, Inc. All Rights Reserved. Prices subject to change without notice. Material contained in this catalog may not be reproduced in whole or part without written permission from Schumacher Irrigation, Inc.

Nursery/Greenhouse Irrigation Catalog Also ask for your new Nursery/Greenhouse/Grower Catalog featuring drip/micro, sprinkler, and other irrigation products pertaining to the nursery & greenhouse industry. To receive the Nursery/Greenhouse Irrigation Catalog: : 18002463685 or Download the catalog at www.schumacherirrigation.com or Fax your request to 4022462072 or Email your request to irrigate@schumacherirrigation.com

Page Steel Underground Section One Underground Fittings Powder Coated Steel Fittings Galvanized Steel Fittings PVC Fittings Riser Valves Clampon Saddles, Couplers, Male Ends Repair Couplers PVC Accessories Bolton Dresser Fittings Solvent PVC Pipe Fittings Gasketed PVC Pipe Fittings Drain Fittings

Page 2 sas<

Page 3 L Pipes Underground Fittings 360 o Swivel GROUND LEVEL 60" ELBOW Elbow on top swivels in a complete 360 o circle to face any direction needed. The above elbow is used along side the pivot pad. The elbow can be removed so that when the pivot is moved from one pad to another the "L" will be flush with the ground.

Page 4 Steel Underground Fittings J Pipe (Galvanized Steel) J Pipe: 4 x 2 Female Bottom PIP/IPS Female RL OD Top UPS Shippable. 4' PIP PIP PIP PIP IPS IPS IPS IPS IPS 62000 62001 62002 62003 81419 62004 62005 62006 62007 36.0 48.5 61.7 76.4 22.5 33.2 48.5 61.7 76.4 310.00 365.00 435.00 535.00 279.00 310.00 365.00 435.00 535.00 * Metric sizes available, please call. * 12 ga. tubing (optional 11,10, or 7) 2' L PIPE (Short Base) (Galvanized Steel) L Pipe: 60" x 2 Female Bottom PIP/IPS Female Top OD. 5' PIP PIP PIP PIP IPS IPS IPS IPS IPS 61981 61982 61983 61984 81418 61991 61992 61993 61994 41.1 55.3 70.2 86.6 25.9 41.1 55.3 70.2 86.6 326.00 383.00 457.00 562.00 293.00 326.00 383.00 457.00 562.00 * Metric sizes available, please call. * 12 ga. tubing (optional 11,10, or 7) * Longer Base add L to part #. 2' L PIPE (long base) (Galvanized Steel) L Pipe: 60" x 40" Female Bottom PIP/IPS Female Top OD. 5' PIP PIP PIP PIP IPS IPS IPS IPS IPS 61981L 61982L 61983L 61984L 81418L 61991L 61992L 61993L 61994L 54.7 73.3 92.8 113.8 34.9 54.7 73.3 92.8 113.8 359.00 421.00 503.00 618.00 322.00 359.00 421.00 503.00 618.00 * Metric sizes available, please call. * 12 ga. tubing (optional 11,10, or 7) 4' T Pipe (Galvanized Steel) T Pipe: 60" x 2 Double Female Bottom PIP/IPS Female RL OD Top * Metric sizes available, please call. * 12 ga. tubing (optional 11,10, or 7) 5' PIP PIP PIP PIP IPS IPS IPS IPS IPS 61986 61987 61988 61989 81420 61996 61997 61998 61990 42.0 56.5 72.7 76.4 25.5 42.0 56.5 72.7 89.4 319.00 365.00 449.00 550.00 229.00 319.00 365.00 449.00 550.00 Special fittings will be made to order, please call. Powder coated fittings are fusion bonded with a Pratt & Lambert epoxy that is virtually indestructible. Galvanized coating is also very durable and longlasting. sas<

Page 5 Steel Underground Fittings Z PIPE (Short Base) (Galvanized Steel) 5' Female RL Top: PIP PIP PIP PIP IPS IPS IPS IPS IPS 61961 61962 61963 61968 81416 61971 61972 61973 61969 59.8 80.0 101.3 124.0 38.3 59.8 80.0 101.3 124.0 355.00 415.00 530.00 695.00 295.00 355.00 415.00 530.00 695.00 Underground Fittings Male RLTop: Z Pipe: 1x8x1 Female Bottom PIP/IPS. Nipples & other acc. optional. * Metric sizes available, please call. * 12 ga. tubing (optional 11, 10, or 7) 5' PIP PIP PIP PIP IPS IPS IPS IPS IPS 61964 61965 61966 61967 81417 61974 61975 61976 61977 102.8 130.8 38.3 61.4 81.1 106.9 130.8 355.00 415.00 530.00 695.00 295.00 355.00 415.00 530.00 695.00 Riser Valve J (Galvanized Steel) 4' 2' x x x x x x x x x x PIP x valve PIP x valve PIP x valve PIP x valve PIP x valve IPS x valve IPS x valve IPS x valve IPS x valve IPS x valve 97850 64001 97851 97852 64002 97853 64005 97854 97855 64006 43.9 39.0 53.8 63.7 59.0 43.9 39.0 53.8 63.7 59.0 385.00 369.00 455.00 480.00 575.00 385.00 369.00 455.00 480.00 575.00 Riser Valve L (Short Base) (Galvanized Steel) 5' x x x x x x x x x x PIP x valve PIP x valve PIP x valve PIP x valve PIP x valve IPS x valve IPS x valve IPS x valve IPS x valve IPS x valve 81410 81324 81412 81414 81326 81411 81325 81413 81415 81327 48.4 44.1 58.3 70.5 65.8 48.4 44.1 58.3 70.5 65.8 404.00 387.00 478.00 504.00 604.00 404.00 387.00 478.00 504.00 604.00 2'

Page 6 Weldon & PVC Fittings Steel nipple (welded on) 62960 62961 62962 0.5 1.5 2.7 20.00 29.00 39.00 Nipples welded on for air relief, surge plug, etc. Steel ARM (welded on) Male Thread 62963 62934 62935 2.6 5.5 8.5 50.00 120.00 159.00 Female Thread 62936 62937 62938 2.5 5.4 7.7 50.00 120.00 159.00 Z PIPE (PVC) 1' #125 #125 8 3 5' Female Top: PIP PIP PIP 12 " PIP IPS IPS IPS IPS 62700 62701 62702 62703 62704 62705 62706 62707 29.2 53.3 78.5 100.5 33.8 61.0 91.3 107.3 379.00 479.00 599.00 799.00 449.00 579.00 739.00 969.00 1' #125 Z Pipe: 1x8x3 Female Bottom PIP/IPS. #125 8 #100 3 #100 5' Male Top: PIP PIP PIP PIP IPS IPS IPS IPS 62708 62709 62710 62711 62712 62713 62714 62715 29.2 52.3 79.0 97.5 33.8 60.0 91.8 106.3 379.00 479.00 599.00 799.00 449.00 579.00 739.00 969.00 J Pipe (PVC) 4 x 20" Female Bottom PIP/IPS Female Top OD UPS Shippable 4 #125 4' #125 PIP PIP PIP PIP IPS IPS IPS IPS 62724 62725 62726 62727 62728 62729 62730 62731 12.1 35.8 31.5 39.5 12.1 36.0 31.5 39.5 255.00 325.00 485.00 595.00 275.00 345.00 495.00 605.00 L PIPE (Long Base) (PVC) 60" x 40" Female Bottom PIP/IPS Female Top OD 3 #100 5 #125 #100 5' PIP PIP PIP PIP IPS IPS IPS IPS 62716 62717 62718 62719 62720 62721 62722 62723 20.9 36.4 52.7 72.8 23.9 41.6 60.5 81.5 310.00 395.00 495.00 629.00 385.00 485.00 615.00 795.00 sas<

Page 7 Air & Pressure Valves Air Relief Valve (Cast Alum) Standard 1. Continuous 61909 61910 61912 61913 97829 97830 97831 1.2 1.6 3.1 6.0 6.0 9.7 26.50 29.00 69.00 159.00 221.00 235.00 259.00 Underground Fittings Venting air in any pressurized pipe is of major importance. Air relief valves help protect the irrigation system from serious head surges and water hammer. Continuous Action Air Vents: * Exhaust Large Volumes of Trapped Air from the Pipeline. * Provide Continuous Air Release during system operation. Air Relief Valve (Nylon) Guardian 1" 65ARIA100 65ARIA2 65ARIA3 96952 96953 96954 0.2 0.3 0.7 37.00 52.00 152.00 Continuous 65ARIB2 96951 1.1 259.00 Guardian Continuous Advantages Made of corrosionresistant reinforced UV protected composite materials. No metal to rust or corrode. 5year warranty TriAction Valve (Cast Aluminum) 050 psi 61915 17.0 359.00 1. Pressure Relief 2. Air Relief 3. Vacuum Relief 50160 psi 61914 24.0 359.00 TriAction Valve Parts Hanger Bolt (3 req.) Decal Hanger Washer (3 req.) Valve Disc Stem Head Cap Cap Gasket Retainer Spring Valve Disc Stem Nut (2 req.) Washer Valve Body Gauge Indicator Compression Spring Hanger Hanger Bolt Nut (3 req.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 97453 97454 97455 97456 97457 97458 97459 97460 97461 97462 97463 97464 97465 97466 97467 15.00 6.00 1.50 2.00 35.00 6.00 3.00 6.50 1.50 1.50 150.00 7.50 155.00 61.00 1.50

Page 8 Pressure Relief Valves Pressure Relief Valve FPT FPT Cast Alum. 50# 80# 100# 125# 160# Threads on Bolt 9 12 3 61919 61920 61921 61922 61923 5.5 5.5 5.5 6.0 6.0 160.00 160.00 160.00 165.00 165.00 Pressure Relief Valve FPT FPT Cast Alum. 80# 96822 6.0 165.00 Steel Galv. 85# 96823 150.00 Cast Alum. Steel Galv. Pressure Relief Valve Field Set FPT PSI Range (Cast Iron) 025# 3040# 4585# 85150# Spring Color Gray Yellow Black Yellow/Blue 97832 97833 97834 97835 145.00 155.00 138.00 189.00 21/ FPT 025# 3040# 4585# 85150# Gray Yellow Black Yellow/Blue 97836 97837 97838 97839 165.00 179.00 159.00 219.00 FPT 025# 3040# 4585# 85150# Gray Yellow Black Yellow/Blue 97840 97841 97842 97843 150.00 189.00 145.00 215.00 Features: * Cast Iron Body * Brass Guide Bushing * Stainless Guide Rod FPT 025# 3040# 4585# 85150# Gray Yellow Black Yellow/Blue 97844 97845 97846 97847 190.00 218.00 185.00 245.00 sas<

Page 9 Riser Valve Tees IPS RISER VALVE TEE (Galvanized Steel) Option: Male ends may be substituted for female. *CustomBuilt Fittings will be made to order. The riser length is measured from the top of the mainline to the top of the valve. Other sizes available on request. Special discounts on quantity orders. Metric Sizes available. Please call for special requests. xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 xxx30" xxx3 xxx4 xxx5 PIP IPS 63915 63916 63917 63918 63921 63925 63922 63926 63923 63927 63924 63928 63931 63935 63932 63936 63933 63937 63934 63938 63941 63945 63942 63946 63943 63947 63944 63948 63951 63955 63952 63956 63953 63957 63954 63958 PIP 63961 63962 63963 63964 63971 63972 63973 63974 63981 63982 63983 63984 63991 63992 63993 63994 PIP 81300 81301 81302 81303 81308 81309 81310 81311 81316 81317 81318 81319 PIP 97857 97859 97861 97863 97865 97867 97869 97871 IPS 63965 63966 63967 63968 63975 63976 63977 63978 63985 63986 63987 63988 63995 63996 63997 63998 IPS 81304 81305 81306 81307 81312 81313 81314 81315 81320 81321 81322 81323 IPS 97856 97858 97860 97862 97864 97866 97868 97870 17.8 20.1 22.3 26.8 27.2 29.5 31.7 36.2 32.3 34.6 36.8 41.3 39.5 41.7 44.0 48.5 44.6 46.9 49.1 53.6 36.0 39.4 42.8 49.6 41.4 44.8 48.2 55.0 49.0 52.4 55.8 62.6 54.5 57.9 61.3 68.1 58.0 62.5 67.0 76.0 66.3 70.8 75.3 84.3 72.6 77.1 81.6 90.6 74.9 80.6 86.2 97.5 81.2 86.9 92.5 103.8 189.00 205.00 219.00 229.00 210.00 226.00 240.00 255.00 259.00 275.00 290.00 305.00 295.00 305.00 320.00 335.00 330.00 345.00 360.00 375.00 259.00 279.00 299.00 319.00 305.00 325.00 345.00 365.00 340.00 360.00 380.00 400.00 419.00 439.00 459.00 479.00 495.00 505.00 515.00 525.00 525.00 535.00 545.00 555.00 575.00 585.00 595.00 605.00 605.00 615.00 625.00 645.00 660.00 670.00 680.00 699.00 Underground Fittings

Page 10 Repair Couplers Repair Coupler (PVC) PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS 62261 62262 62263 62267 62268 62264 62265 62266 62269 4.0 6.0 10.0 15.0 20.0 4.0 6.0 10.0 15.0 59.00 84.00 134.00 184.00 275.00 50.00 60.00 95.00 117.00 100 psi maximum pressure. 19" long PVC Pipe (Plain x gasket, 31" long, #100) PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS 62294 62295 62296 62297 62298 62299 62300 62301 62302 4.8 8.4 13.2 19.3 30.1 5.5 9.4 14.6 20.5 60.00 90.00 120.00 150.00 210.00 67.00 110.00 155.00 230.00 Telescoping Repair Coupler (PVC) *Gasket included *100 psi maximum pressure. PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS 62610 62611 62612 62613 62614 62615 62616 62617 62618 8.8 14.4 23.2 34.3 50.1 9.5 15.4 24.6 35.5 119.00 174.00 254.00 334.00 485.00 162.00 166.00 216.00 347.00 Full repair wrap 125 max psi Ideal to stop leaks without cutting pipeline. OD dia x long IPS dia x long OD/PIP dia x long IPS dia x long OD/PIP dia x long IPS dia x long OD dia x long IPS dia x long OD/PIP dia x long IPS dia x long 69829 69830 69831 69832 69833 69834 69835 69836 69837 69838 11.0 11.0 12.0 12.0 13.0 13.0 19.0 19.0 20.0 20.0 195.00 200.00 240.00 240.00 279.00 279.00 279.00 369.00 369.00 420.00 Fiberglass Tape 1/ Pipe 1" Wide x 30" Long 69562 < 60 psi = 8 Layers/Wraps Min. > 60 psi = 10 Layers/Wraps Min. 1/ Pipe 3/ Pipe 1" Pipe Pipe Pipe Pipe Pipe 1" Wide x 3 Long Wide x 30" Long Wide x 60" Long Wide x 10 Long Wide x 7 Long Wide x 180" Long Wide x 360" Long 69563 69564 69565 69566 69567 69568 69569 17.00 28.00 19.00 23.00 25.00 55.00 39.00 75.00 sas< 0.2 0.2 0.2 0.7 0.7 0.7 1.3

Page 11 Repair Couplers Bolton Repair Coupler (PoWDER COATed Steel) 180 psi maximum pressure. 1 long 1 Long Fits OD, PIP, & IPS Flange Packs 2 Flange Packs Required per repair coupler. Complete PIP 62206 21.0 PIP 62208 26.0 PIP 62210 36.0 PIP 62212 44.0 1 PIP 62200 52.0 1 PIP 69888 58.0 IPS 62207 12.0 IPS 62213 21.0 IPS 62214 26.0 IPS 62215 36.0 IPS 62216 44.0 Body Only 1 Flange Pack (Single) OD/PIP OD/PIP OD/PIP OD/PIP 1 PIP 18.7" PIP 20. PIP IPS IPS IPS IPS IPS Gasket (Bolton) OD/PIP OD/PIP OD/PIP OD/PIP 1 PIP 18.7" PIP 20. PIP 62033 62034 62035 62036 62037 62038 62011 62012 62013 62014 95851 95852 95853 62016 62017 62018 62019 62020 95837 95839 95829 95831 95832 95841 95842 8.0 13.0 17.0 24.0 29.0 36.0 4.0 4.5 6.0 7.5 8.0 18.0 22.0 2.0 4.0 4.5 6.0 7.5 163.00 210.00 275.00 407.00 495.00 800.00 124.00 163.00 210.00 275.00 407.00 78.00 105.00 130.00 159.00 245.00 339.00 29.00 40.00 58.00 81.00 101.00 135.00 148.00 23.00 29.00 40.00 58.00 81.00 8.00 10.00 20.00 25.00 26.00 35.00 38.00 Underground Fittings IPS IPS IPS IPS IPS 95833 95836 95838 95828 95830 5.30 8.00 10.00 20.00 25.00 Repair Coupler (galvanized Steel) PIP PIP PIP PIP 1 PIP 62250 62251 62252 62253 62255 13.0 17.0 21.0 24.0 50.0 96.00 125.00 167.00 225.00 422.00 *Metric sizes available, please call. 200 psi maximum pressure on to. 150 psi maximum pressure on and 1. 1 long IPS IPS IPS IPS IPS 62239 62240 62241 62242 62243 7.0 13.0 17.0 21.0 24.0 84.00 96.00 125.00 167.00 225.00

Page 12 Bolton Saddles & Risers Saddle Riser (Powder Coated or Galvanized) 3 x x 3 x x 3 x x 3 x x 3 63820 63821 63822 63823 22.0 24.0 26.0 28.0 155.00 165.00 175.00 195.00 For PIP or IPS use. Steel powder coated or galvanized. 4 x x 4 x x 4 x x 4 x x 4 63825 63826 63827 63828 22.0 24.0 26.0 28.0 171.00 225.00 200.00 210.00 Saddle Riser (With PVC Riser) Lightweight Easy to install Durable Sunlight (UV) Inhibited UPS Shippable For PIP or IPS use Using x3 & 4 PVC Riser Pipe Using outlet on galvanized saddle Using x galvanized valve stubs. 4 5 x x 4 x x 4 x x 4 x x 4 x x 5 x x 5 x x 5 x x 5 63804 63805 63806 63830 63807 63808 63809 63831 19.0 20.0 23.0 25.0 21.0 22.0 20.0 27.0 201.00 211.00 230.00 248.00 205.00 215.00 234.00 252.00 Saddle (Galvanized Steel) W/fpt x x x x 1 x 1 x 63810 63811 63812 63813 97628 97629 11.0 12.0 15.0 17.0 23.0 28.0 112.00 122.00 141.00 159.00 181.00 639.00 x x x x 63814 63815 63816 63817 12.0 13.0 16.0 18.0 122.00 129.00 149.00 166.00 For OD, PIP or IPS use. x x x 1 x 1 x 97632 97633 97634 97635 97636 20.0 22.0 24.0 26.0 31.0 173.00 186.00 205.00 246.00 700.00 PVC Riser Pipe & double male threaded High density polyethylene riser pipe w/uv inhibitor (SCH80) x3 (for 4 riser) x3 (for 4 riser) x4 (for 5 riser) x4 (for 5 riser) 63802 63790 63803 63791 3.0 5.0 15.00 29.00 19.00 39.00 Riser Tee (MPT TOP) (Galvanized steel) xxmpt x5, PIP 95319 310.00 For use as air relief valve in the line. sas<

Page 13 Underground Couplers & Male Ends Weldon Coupler PVC Pipe O.D. (Powder Coated steel) PIP PIP PIP PIP 1 PIP 1 PIP IPS 2. IPS IPS IPS IPS IPS IPS IPS Metric(160mm) Metric(200mm) Metric(250mm) Metric(315mm) 6.140" 8.160" 10.20" 12.240" 15.30" 18.701" 2.37 2.87 3.50" 4.50" 6.62 8.62 10.750" 12.750" 6.62 7.87" 9.8 12.41" 62231 62232 62233 62234 62235 62600 62217 62218 62219 62220 62221 62222 62223 62224 62226 62227 62228 62229 6.0 8.0 11.0 13.0 14.0 19.0 2.0 3.0 6.0 8.0 11.0 13.0 48.00 56.00 79.00 87.00 205.00 358.00 42.00 42.00 40.00 39.00 48.00 56.00 79.00 87.00 44.30 72.00 81.50 110.00 Underground Fittings Weldon Coupler PVC Pipe O.D. (STAINLESS STEEL) PIP 6.140" 95159 PIP 8.160" 95160 3.5 6.5 410.00 480.00 IPS IPS IPS 4.50" 6.62 8.62 95156 95157 95158 2.5 3.5 6.5 330.00 449.00 525.00 #304 Stainless Steel Weldon Coupler (BLACK Steel) PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS PVC Pipe O.D. 6.140" 8.160" 10.20" 12.240" 15.30" 4.50" 6.62 8.62 10.750" 12.750" 95043 95044 95045 95046 97441 95037 95038 95039 95040 95041 6.0 8.0 11.0 13.0 14.8 3.0 6.0 8.0 11.0 13.0 36.00 45.00 65.00 80.00 165.00 30.00 36.00 45.00 65.00 80.00 Weldon Male End (Powder Coated steel) PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS 62281 62282 62283 62284 62285 62289 62290 62291 62292 62293 3.5 6.5 10.5 12.5 14.0 2.5 3.5 6.5 10.5 12.5 56.00 61.00 74.00 90.00 158.00 52.00 56.00 61.00 74.00 90.00

Page 14 Accessories For PVC Primer (Step 1 of 2) Purple It is highly recommended to apply primer on both pipe & socket before gluing to presoften & prepare plastic pipe & fittings for bonding. PVC Glue (Step 2 of 2) Gray, C200, PVC 12, Heavy Body for larger diameters. When primer is still wet, apply heavy amt of glue on pipe & lighter amt. in socket. Wipe off excess. 1 quart 1 quart 1 gallon 69170 2.0 18.00 69130 69140 2.0 8.5 22.00 63.00 Pipe Lube One gallon of pipe lube will cover 50 pipe joints. 1 quart 1 gallon PIP PIP PIP PIP 1 PIP 1 PIP 69160 69150 Average Number of Joints/qt. of weldon cements Pipe Diameter 1/ 3/ 1" 1 1/ 1 1 Gasket (Underground) Number of Joints 300 200 125 90 60 40 30 10 5 23 12 3/4 1/2 Round back: 64241 64242 64243 64244 64245 95291 2.0 8.5 0.3 0.6 0.8 1.0 9.00 27.00 10.00 12.00 17.50 22.50 25.00 51.00 IPS IPS IPS IPS IPS 64233 64234 64235 64236 64237 0.3 0.6 0.8 1.0 9.50 10.00 12.00 17.50 22.50 Square PIP PIP PIP PIP 1 PIP 1 PIP 97645 97647 97638 97640 97641 97642 1.8 2.0 2.3 2.5 8.00 10.00 20.00 25.00 30.00 62.00 IPS IPS IPS IPS IPS 97643 97644 97646 97637 97639 1.3 1.8 2.0 2.3 6.00 9.00 11.00 21.00 25.00 Draw Band (painted steel) *For #80 PIP plastic pipe, state other psi sizes. 1 1 (for Newby boot) 61704 61705 61706 61707 61708 61709 0.6 0.7 0.9 1.0 1.1 1.2 10.10 10.30 10.70 11.00 11.50 13.50 sas<

Page 15 Couplers bolton coupler (Powder Coated Steel) 9" long. Male weldon x bolton coupler See page 11 for IPS Flange Pack. Replacement gaskets are on page 11. bolton coupler (black Steel) Complete Half Body Flange Pack (SINGLE) Complete OD/PIP OD/PIP OD/PIP OD/PIP 1 PIP 18.7" PIP 20. PIP IPS IPS IPS IPS IPS 1 18.7" 20. OD OD OD/PIP OD/PIP OD/PIP OD/PIP 1 PIP 18.7" PIP 20. PIP OD OD/PIP OD/PIP OD/PIP OD/PIP Black Black Black Black Black 64015 64016 64017 64018 64019 69787 95843 64010 64011 64012 64013 64014 62045 62046 62047 62048 62049 62062 95848 95849 95850 62027 62028 62011 62012 62013 62014 95851 95852 95853 95019 95023 95026 95029 95032 11.0 14.0 18.0 22.0 25.0 30.0 35.0 8.0 11.0 14.0 18.0 22.0 6.0 6.0 7.0 9.0 13.0 16.0 19.0 22.0 25.0 3.0 4.0 4.0 4.5 6.0 7.5 8.0 18.0 22.0 8.0 11.0 14.5 18.5 22.0 100.00 124.00 167.00 214.00 340.00 325.00 350.00 67.00 100.00 124.00 167.00 214.00 44.00 52.00 71.00 84.00 109.00 133.00 168.00 225.00 250.00 23.00 41.00 29.00 40.00 58.00 81.00 101.00 135.00 148.00 57.00 73.00 86.00 110.00 175.00 Underground Fittings 9" long. Male weldon x bolton coupler IPS IPS IPS IPS IPS Black Black Black Black Black 95021 95024 95027 95030 95033 8.0 11.0 14.5 18.5 22.0 57.00 73.00 86.00 110.00 175.00 BoltON Dresser Reducer (Powder Coated OR GALVANIZED Steel) IPS x OD IPS x OD/PIP IPS x OD/PIP IPS x IPS IPS x OD/PIP OD/PIP x OD/PIP IPS x IPS IPS x OD/PIP OD/PIP x OD/PIP IPS x OD/PIP 64020 64022 64024 64026 64027 64029 64031 64032 64034 64036 13.0 21.0 27.5 27.5 26.0 35.2 35.0 20.0 44.0 44.0 124.00 163.00 199.00 199.00 210.00 269.00 249.00 275.00 379.00 407.00

Page 16 Steel Underground Fittings Flange Adapter (Galvanized Steel) *Metric sizes available, please call. PIP PIP PIP PIP IPS IPS IPS IPS 12' IPS 64051 64052 64053 64054 64043 64045 64046 64047 64048 15.3 20.9 27.6 36.0 10.1 15.3 20.9 27.6 36.0 115.00 135.00 165.00 199.00 100.00 115.00 135.00 165.00 199.00 Service Tee (Galvanized Steel) xx PIP xx PIP xx PIP xx IPS xx IPS xx IPS 64064 95311 64065 64060 64061 64062 17.4 19.0 27.5 8.7 17.4 22.5 153.00 144.00 192.00 149.00 153.00 192.00 *Metric sizes available. Other sizes also available. Male Nipple available. Please call. Tee (Galvanized steel) *Metric sizes available. Reducing Tees also available. Please call. PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS 64079 64080 64081 64082 64083 64073 64074 64075 64076 64077 24.8 33.0 44.3 66.2 77.6 13.5 24.8 33.0 44.3 66.2 169.00 245.00 355.00 492.00 935.00 140.00 169.00 245.00 355.00 492.00 Cross (Galvanized steel) PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS 64099 64100 64101 64102 64103 64093 64094 64095 64096 64097 37.6 50.0 66.6 79.2 92.4 21.0 37.6 50.0 66.6 79.2 305.00 345.00 465.00 685.00 1,137.00 225.00 305.00 345.00 465.00 685.00 *Metric sizes available, please call. Reducing sizes also available. Please call. sas<

Page 17 Steel Underground Fittings Reducer (Galvanized steel) Adapter (Galvanized steel) IPS x PIP PIP x PIP PIP x PIP PIP x PIP 64110 64111 64112 64113 10.2 16.5 22.2 37.0 125.00 145.00 175.00 275.00 Underground Fittings PIP x IPS PIP x IPS PIP x IPS PIP x IPS 64121 64122 64123 64124 12.0 16.0 22.0 26.0 120.00 125.00 169.00 210.00 45 o Elbow (Galvanized steel) PIP PIP PIP PIP 64130 64131 64132 64133 22.2 29.5 39.0 46.4 160.00 195.00 249.00 295.00 IPS IPS IPS IPS IPS 64137 64138 64139 64140 64141 12.8 22.2 29.5 39.0 46.4 135.00 160.00 195.00 249.00 295.00 11 o and 22 o are available at the same price. 90 o Elbow (Galvanized steel) PIP PIP PIP PIP 64150 64151 64152 64153 22.2 29.5 39.0 46.4 175.00 225.00 295.00 350.00 IPS IPS IPS IPS IPS 64157 64158 64159 64160 64161 10.5 22.2 29.5 39.0 46.4 145.00 175.00 225.00 295.00 350.00 Other sizes are available. Metric sizes are also available. Please.

Page 18 Steel Underground Fittings Double Coupler, (Galvanized steel) S PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS 64171 64172 64173 64174 64175 64179 64180 64181 64182 64183 12.0 16.0 22.0 26.0 28.0 6.0 12.0 16.0 22.0 26.0 100.00 120.00 150.00 170.00 450.00 95.00 100.00 120.00 150.00 170.00 tend Plug, (Galvanized steel) *Metric sizes available, please call. PIP PIP PIP PIP 1 PIP 64191 64192 64193 64188 64189 4.5 9.8 14.5 18.3 14.0 80.00 90.00 105.00 130.00 260.00 e IPS IPS IPS IPS IPS 64197 64198 64199 64200 64201 2.9 4.5 9.8 14.5 18.3 75.00 80.00 90.00 105.00 130.00 eend Cap, (Galvanized steel) PIP PIP PIP PIP 1 PIP 64203 64204 64205 64206 64207 7.0 11.3 15.0 18.8 14.0 75.00 85.00 115.00 139.00 335.00 l*metric sizes available, please call. IPS IPS IPS IPS IPS 64211 64212 64213 64214 64215 3.4 7.0 11.3 15.0 18.8 65.00 75.00 85.00 115.00 139.00 sas<

Page 19 Solvent PVC Pipe Fittings 90 o Elbow (PVCSolvent) P#100 psi test, except A&H which is #22/#50 psi test. *Metric sizes available, please call. PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS A&H PIP A&H PIP A&H PIP A&H PIP A&H 62311 62312 62313 62314 62320 62560 62561 62562 62563 62315 62316 62317 62318 62319 4.0 8.0 8.0 14.0 20.0 4.0 6.0 8.0 14.0 2.0 1.5 2.5 3.0 3.5 68.00 117.00 165.00 231.00 358.00 54.00 82.00 128.00 178.00 14.00 40.00 48.00 75.00 114.00 Underground Fittings 45 o Elbow (PVCSolvent) PIP PIP PIP PIP 1 PIP 62321 62322 62323 62324 62330 1.0 2.0 2.5 3.0 4.0 28.00 48.00 72.00 107.00 167.00 V#100 psi test, except A&H which is #22/#50 psi test. *Metric sizes available, please call. IPS IPS IPS IPS IPS A&H PIP A&H PIP A&H PIP A&H PIP A&H 62550 62551 62552 62553 62325 62326 62327 62328 62329 1.0 2.0 2.5 3.0 1.3 1.5 1.8 2.0 3.0 28.00 46.00 70.00 102.00 18.00 24.00 30.00 37.00 57.00 22.5 o Elbow (PVCSolvent) PIP PIP PIP PIP 1 PIP 62270 62271 62272 62273 62274 1.0 2.0 2.5 3.0 4.0 21.00 31.00 58.00 81.00 136.00 #100 psi test. *Metric sizes available, please call. C11o, 15o, 30o and 60o elbows available upon request. Please call.

Page 20 Solvent PVC Pipe Fittings Tee (PVCSolvent) #100 psi test *Metric sizes available, please call. PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS 62331 62332 62333 62334 62336 62335 62570 62571 62572 62573 5.0 9.0 14.0 18.0 25.0 2.3 5.0 9.0 14.0 18.0 56.00 83.00 132.00 211.00 362.00 30.00 76.00 96.00 134.00 210.00 Reducing Tee (PVCSolvent) #100 psi test *Metric sizes available, please call. x PIP x PIP x PIP x IPS x IPS x IPS 62340 62341 62342 62574 62575 62576 3.5 4.5 8.5 4.0 5.0 9.0 42.00 55.00 68.00 49.00 66.00 85.00 Wye (PVCSolvent) PIP A&H PIP A&H PIP A&H 62601 62602 62603 42.00 95.00 138.00 Drain Only End Cap (PVCSolvent) #100 psi test, except A&H which is #22/#50 psi test. *Metric sizes available, please call. PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS PIP A&H PIP A&H PIP A&H PIP A&H 1 PIP A&H 62410 62411 62412 62413 62414 62580 62581 62582 62583 62420 62421 62422 62423 62424 1.5 2.0 2.5 3.0 4.0 1.5 2.0 2.5 3.0 0.2 0.6 2.5 3.0 4.0 26.00 33.00 53.00 69.00 113.00 23.00 30.00 47.00 90.00 7.00 11.00 18.00 28.00 49.00 Coupling (PVCSolvent) #100 psi test, except A&H which is #22/#50 psi test. *Metric sizes available, please call. PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS IPS IPS A&H PIP A&H PIP A&H PIP A&H 62431 62432 62433 62428 62429 62430 62585 62586 62587 62588 62434 62435 62436 62437 1.0 2.0 5.0 7.0 10.0 0.5 1.0 2.0 5.0 7.0 0.4 0.8 1.5 3.0 18.00 24.00 38.00 58.00 100.00 9.50 14.00 25.00 40.00 63.00 9.00 12.00 12.00 16.00 sas<

Page 21 Solvent PVC Pipe Fittings Reducer (PVCSolvent) #100 psi test, Except A&H which is #22/#50 psi test. *Metric sizes available, please call. PIP x IPS x PIP x PIP x PIP 1 x PIP x IPS x IPS x IPS x IPS PIP x IPS A&H x PIP A&H x PIP A&H x PIP A&H 62440 62441 62442 62438 62439 62590 62591 62592 62593 62443 62444 62445 62446 1.5 2.0 3.0 4.0 5.0 1.5 2.0 3.0 4.0 0.6 1.5 2.0 2.5 22.00 33.00 45.00 65.00 104.00 18.00 28.00 56.00 76.00 15.00 18.00 28.00 40.00 Underground Fittings Adapter (PVCSolvent) IPS x PIP IPS x PIP IPS x PIP 62451 62452 62453 1.5 2.5 5.0 21.00 30.00 50.00 #100 psi test Flange (PVCSolvent) PIP PIP PIP PIP IPS IPS IPS IPS IPS IPS 62480 62481 62482 62483 97659 62484 62485 62486 62487 62488 5.6 8.3 14.3 21.9 2.8 4.7 6.8 11.6 78.50 114.00 159.75 231.75 32.00 40.00 61.50 99.00 183.75 198.75 Female Threaded Adapter (PVCSolvent) #100 psi test, except PIP PIP PIP PIP IPS IPS IPS IPS IPS 62461 62462 62463 62464 62470 62471 62472 62473 62474 64.00 95.00 132.00 153.00 12.00 41.00 89.00 110.00 164.00 A&H which is #22/#50 psi Male Threaded Adapter (PVCSolvent) #100 psi test, except A&H which is #22/#50 psi Bushing (PVCSolvent) PIP PIP PIP PIP IPS IPS IPS IPS IPS PIP x IPS PIP x IPS PIP x IPS PIP x IPS 62466 62467 62468 62469 62475 62476 62477 62478 62479 62595 62596 62597 62598 57.00 80.00 117.00 138.00 11.00 28.00 76.00 118.00 165.00 23.00 28.00 44.00 66.00 IPS outside x PIP inside

Page 22 Gasketed PVC Pipe Fittings 90 o Elbow P(PVCGasketed) #100 PSI Test PIP PIP PIP PIP 1 PIP IPS IPS IPS IPS 62350 62351 62352 62353 62354 62520 62521 62522 62523 83.00 133.00 205.00 291.00 594.00 108.00 164.00 238.00 319.00 45 o Elbow (PVCGasketed) PIP PIP PIP PIP 1 PIP 62360 62361 62362 62363 62364 74.00 104.00 150.00 213.00 430.00 #100 PSI Test IPS IPS IPS IPS 62510 62511 62512 62513 74.00 104.00 150.00 226.00 V22.5 o Elbow (PVCGasketed) PIP PIP PIP PIP 1 PIP 62355 62356 62357 62358 62359 63.00 93.00 137.00 198.00 327.00 #100 PSI Test IPS IPS IPS IPS 62500 62501 62502 62503 71.00 86.00 148.00 197.00 Tee (PVCGasketed) PIP PIP PIP PIP 1 PIP 62365 62366 62367 62368 62369 99.00 132.00 201.00 273.00 493.00 #100 PSI Test IPS IPS IPS IPS 62540 62541 62542 62543 85.00 151.00 219.00 304.00 11 C#100 o, 15 o, 30 o and 60 o elbows available upon request. psi test, except A&H which is #22/#50 psi test. sas<

Page 23 PVC Fittings Drainage Riser (PVCSolvent) x x x Perforated Body Only x 7' #100 x 7' #80 x 7' #80 x 6' #80 62110 62120 62130 62110C 62120C 62130C 96958 21.1 37.2 62.8 16.8 30.2 50.2 48.2 245.00 349.00 439.00 137.00 179.00 225.00 315.00 Underground Fittings The Drainage Riser comes fully assembled and includes the appropriately sized: 90 o elbow (A&H) increaser (A&H) cap (A&H) The Drainage Riser is made to fit PIP (Plastic Irrigation Pipe). The Drainage Riser is made to local Soil Conservation Office Specifications. Other sizes are available on request.,, = 7' Long = 6' Long Rodent Door (Painted steel) 62181 62182 62183 62184 62185 0.2 0.6 0.8 1.5 2.3 9.00 10.00 12.50 18.50 27.00

Page 24 WHY WAIT ON Custom Built Fittings Fast, Low Cost Custom Built Irrigation & Industrial Fittings Available in: Steel Powder Coat Steel Galvanized Aluminum Cast Aluminum PVC Stainless Steel #304, fax, or email your drawing, and we will send you a price. m

Page 25 Tow Line / Wheelmove Section Two Towline / Wheelmove Tow Line Parts Hose Adapters Hose Wheel Move Wheel Line Technical Data Hose Clamps

Page 26 Tow Line Parts Tow Coupler 30310 6.3 65.00 All steel construction, zinc plated. Includes 2 Gaskets, 1 Quick Drain and 4 HalfMoon Pins. Tow Coupler Ear 3/ 30320 0.3 1.00 Made of formed steel. Welds to coupler body and holds half moon pin. Tow Coupler Skid Pan 30330 0.6 3.00 Formed steel wear pan. Welds to bottom of coupler body. Quick Drain 30340 1.50 Fits into bottom of coupler body to drain line when shut down. Cotter pin is included. Gasket (Lindsay) Drain NonDrain 30350 61614 0.3 0.3 2.00 3.20 Drain NonDrain Specify Drain or NonDrain style. Fit coupler and stabilizer. Stabilizer must have NonDrain Gasket. Tow Line Pipe x 40' 30380 35.6 189.00 Aluminum. Comes with HalfMoon Pins, Straps & Bolts installed. m

Page 27 Tow Line Parts Half Moon Clamp 30410 0.9 4.00 Galvanized steel. Attaches pipe to coupler with tow pins. Half Moon Bolt & Nut Bolt: Nut: 5/1 x 5/ 5/1 30420 30430 0.1 0.1 0.06 0.03 Washer included with bolt. Half Moon Strap 1" 30440 0.2 1.00 Towline / Wheelmove Galvanized. Bolts to back side of half moon clamp to prevent clamp from pulling off of pipe. Half Moon Pin 3/ 30450 0.1 1.50 Hardened steel, plated. Connects tow line pipe to coupler and stabilizer. Risers 1" Steel tubing. 3/ Female x 1" Male. FxM FxM 1 FxM 2 FxM 30" FxM 3 FxM 40" FxM 4 FxM 60" FxM 7 FxM 30465 30460 30466 30461 30467 30468 30462 30469 30463 30464 0.6 0.9 1.1 1.4 1.6 1.9 2.1 2.5 2.9 3.4 6.00 7.00 8.00 9.00 10.00 11.00 11.00 14.00 16.00 18.00 1" Steel tubing. 1" Male x 1" Male. MxM 2 MxM 40" MxM 60" MxM 7 MxM 30470 30471 30472 30473 30474 0.9 1.4 2.1 2.9 3.4 7.00 9.00 11.00 16.00 18.00

Page 28 Tow Line Parts Stabilizer Short: x40' Tall: x60' 30510 30520 77 118 350.00 400.00 All steel construction. Fit into tow line with half moon pins. Includes gaskets and pins. Stabilizer Conversion Kit 30530 25 210.00 Includes gaskets and pins. Tow Plug 30540 5.5 35.00 Fits into end coupler of tow line as hitch for towing. Tripod 30550 5 59.00 All steel construction. Comes complete with Bolts & Nuts. Fits on riser to stabilize end of tow line while watering. Shutoff Valve 1" 30560 0.8 19.00 Order a 1" Close Nipple with this valve. Installed between end coupler and riser. Chain 5/0 Size, Plated 30640 0.5/ft 6.50/ft Horizontal Working Load Limit = 880 lbs. m

Page 29 3 Segment Hose Adapters Coupling (Sure Grip) C D B *Complete sets include everything shown above *Can be pulled with water inside hose. A F G/H D Complete: 41/ 3Seg Clamp: 41/ Coupler Body: 41/ 51/ Sleeve: 51/ Gasket: 51/ Ring Band Lock: w/steel Pin w/steel Pin Lynch Pin: 5/1 ( thru ) ( thru ) ( thru ) ( thru ) D D D D D C C C C C C A A B B G H H F 95844 95845 95846 69659 95207 69608 69609 69610 69611 95184 97468 97469 97470 97471 97472 97473 97445 97446 97447 97448 97449 97450 97451 97452 3.3 1.6 4.5 $803.00 856.00 975.00 790.00 1,430.00 232.00 232.00 232.00 232.00 241.00 237.00 305.00 387.00 447.00 222.00 460.00 37.00 82.00 9.00 10.00 50.00 52.00 75.00 3.00 Towline / Wheelmove Hose Fittings FRL MRL Alum Alum 69506 69507 1.5 1.2 127.00 120.00 FRL MRL Alum Alum 69504 69505 1.8 1.4 265.00 255.00 FRL MRL Alum Alum 69502 69503 2.4 1.8 425.00 415.00 FRL *Includes 3 segment clamp MRL FRL 10 ga. MRL 10 ga. *Cannot be pulled with water inside hose. Steel Gal. Steel Gal. 69500 69501 420.00 420.00 Full Adapter (Aluminum) *Includes 3 segment clamp Half adapter Steel: Aluminum: 41/ 41/ 69889 69656 69657 69658 95246 69648 69649 69650 69651 95877 330.00 340.00 415.00 436.00 820.00 265.00 288.00 311.00 370.00 452.00 Alum 69652 90.00 41/ Alum 69653 175.00 Alum 69654 215.00 * Weldon Alum 69655 370.00 * Includes 3 segment clamp Alum 95247 452.00 Steel Steel Steel Steel Steel

Page 30 Hose Adapters hose barb weldon (Black steel) Weldon. 21/ 41/ 1 No. of Ribs 2 30601 2 95014 2 30602 3 30603 2 30604 2 30605 3 30606 3 30607 2 30608 2 30609 3 97553 0.4 0.6 0.8 1.8 1.9 2 3.3 5.4 10.0 12.1 18.8 13.00 13.00 13.00 14.00 19.00 20.00 21.00 33.00 47.00 57.00 85.00 hose barb weldon (Aluminum).050.072.078.058.064 30641 30652 30642 30643 30644 0.5 1.1 1.4 1.3 1.6 35.00 37.00 40.00 40.00 41.00 hose barb weldon (Thick Aluminum) Sharp Barbs 30636 1.5 92.00 41/ 30637 1.7 93.00 30639 97803 30638 2.2 1.9 103.00 130.00 95.00 * long & 1/ thick *with small barbs (as shown) or spaced barbs Hose barb weldon (Cast Aluminum) 97794 97795 97796 2.6 4.1 6.0 45.00 65.00 85.00 Hose Adapter Female RL (galvanized steel) 12 ga. 12 ga. 12 ga. 12 ga. 68050 68051 68052 30681 30683 30679 30664 3.4 4.5 5.6 6.1 9.9 14.5 16.0 26.00 35.00 45.00 56.00 80.00 115.00 185.00 Hose Adapter male rl (galvanized steel) 12 ga. 12 ga. 12 ga. 12 ga. 68053 68054 68055 30680 30682 30678 30663 3.0 4.0 5.0 6.1 9.9 15.0 14.0 25.00 33.00 45.00 55.00 81.00 95.00 175.00 m

Page 31 Hose Accessories Hose Adapter B&H (Galvanized steel) Hose Barb x Male B & H Hose Barb x Male B & H Hose Barb x Male B & H Hose Barb x Male B & H Hose Barb x Male B & H 68060 68061 68062 68063 95322 1.9 3.3 4.3 5.4 6.5 32.00 37.00 41.00 63.00 78.00 Hose Barb x Female B & H Hose Barb x Female B & H Hose Barb x Female B & H Hose Barb x Female B & H Hose Barb x Female B & H 68056 68057 68058 68059 95321 2.6 4.5 6 7.5 9 28.00 33.00 37.00 53.00 61.00 Hose Mender (Galvanized steel) 68064 68065 68066 68067 68068 68069 2.2 3.8 5 6.3 7.5 14 18.00 27.00 32.00 45.00 48.00 73.00 Towline / Wheelmove Hose Mender (Plated Steel) 1/ 3/ 1" 11/ 11/ 21/ 96835 96836 96837 96838 96839 96840 96841 96842 96843 96844 96845 96846 96847 96848 0.1 0.2 0.3 0.5 0.5 0.8 1.7 2.4 2.9 6.9 13.2 20.9 4.00 4.50 5.00 7.00 7.00 9.00 18.00 18.00 20.00 65.00 53.00 110.00 210.00 320.00 Hose Mender (Aluminum).050.072.078.058.064 30645 30653 30646 30647 30648 0.5 1.1 1.4 1.3 1.6 52.00 55.00 56.00 56.00 58.00 * Applications: * PVC lay flat for drip irrigation * Rubber discharge hose for medium pressure irrigation King Nipple (Plated Steel) 1/ 3/ 1" 11/ 11/ 21/ 67000 67001 67002 67003 67004 67005 67006 67007 67008 67009 67010 67011 67012 67013 0.1 0.2 0.3 0.6 0.7 1.1 1.7 2.1 3.1 4.1 12.2 16.4 21.8 33.2 2.50 2.60 2.90 4.50 6.10 6.00 15.50 15.00 18.00 34.50 72.50 97.50 172.00 250.00

Page 32 Hose Accessories Tow Hose x 12' x 17' 30655 30650 14 18 319.00 375.00 Maximum: #125 psi Connects tow line to mainline. Both ends Male with hook & band. *For other than standard fittings, add $5.00/end to price. Bandit Tool 69093 4.5 172.00 Preformed Junior Adapter 69094 215.00 *For use with above tool on preformed clamps Banding (Stainless Steel) 5/ x 100' 3/ x 100' 69095 97752 6.7 167.00 177.00 * Other sizes are available, please call. * StandardDuty Type 201 Stainless. Bandit Buckle 5/ 3/ 69096 97753 2.6 98.00 99.00 * For use with above Stainless Steel boxed banding. * 100 Buckles/Box * StandardDuty Buckle Preformed Clamp J215 J216 3/ wide x ID 3/ wide x ID 69097 69098 0.3 0.3 9.00 10.00 *For use with above tool and jr. adapter *Stainless Steel * 25 per Box is available. Glue (For hose fittings) 1 Quart Pliobond #20 96778 2.1 43.00 m

Page 33 Wheel Move (Wheeline, Sideroll) Wheel Move (complete) x 1280' x 1280' 50160 50161 Wheel Move Coupler Set (Cast Aluminum) Presson Weldon 50167 50168 8 6.3 76.00 84.00 Sprinkler Leveler 3/ 50165 2.4 17.00 Towline / Wheelmove Leveler Elbow 1" x 3/ 50166 8.00 Wheels Distance 60' 60' 50' 50' 60' 60' 50' 50' 60' 60' # of Turns 4 4 3 3 3 3 2 2 2 2 4' 4' 5' 5' 6' 6' 7' 7' 8' 8' 10' 10' x 4 18 ga. x 4 18 ga. x 5 18 ga. x 5 18 ga. x 6 18 ga. x 6 18 ga. x 7 18 ga. x 7 18 ga. x 9 16 ga. x 9 16 ga. x120" 16 ga. x120" 16 ga. 50170 50171 50172 50173 50174 50175 50176 50177 50178 50179 50180 50181 34 35 42 42 44 44 56 56 78 78 113 113 114.00 114.00 93.00 93.00 100.00 100.00 127.00 127.00 260.00 260.00 415.00 415.00 Wind Brace x 5' 50182 x 67' 50183 8.3 9.8 55.00 60.00 x 5' x 67' 50184 50185 8.9 9.8 55.00 60.00

Page 34 Discharge Hose Discharge Hose (Black RubberHigh Pressure) Features: 1. Ideal for wheeline systems 2. Black rubber covering 3. Sized for use with irrigation fittings 4. Lightweight and flexible 5. Abrasion, UV, and kink resistant 6. Heavy duty discharge for use as a mainline for water and liquid manure, or agricultural and industrial sludge Flat Measurement 11/ 300 max psi 21/ 21/ 41/ 300 max psi 300 max psi 300 max psi 200 max psi 200 max psi 200 max psi 200 max psi 150 max psi 33/1 47/ 61/ 71/ 77/ 1 150 max psi 100 max psi 1 34 max psi 30590 30591 30592 30593 30651 30584 30597 30670 30671 30585 30586 96850 0.8/ft 1.1/ft 1.5/ft 1.8/ft 0.8/ft 1.2/ft 1/ft 1.6/ft 2.9/ft 5.1/ft 5.8/ft 3.5 /ft 6.20/ft 6.80/ft 9.10/ft 9.20/ft 12.00/ft 17.00/ft 16.00/ft 19.00/ft 24.00/ft 40.00/ft 75.00/ft 139.00/ft Discharge Hose (Orange PVCMedium Pressure) 11/ 150 max psi 150 max psi 21/ 150 max psi 150 max psi 125 max psi 115 max psi 70 max psi 30570 30571 30572 30573 30574 30575 30576 0.2/ft 0.3/ft 0.4/ft 0.5/ft 0.8/ft 1.2/ft 1.6/ft 1.60/ft 1.90/ft 2.50/ft 3.70/ft 6.20/ft 8.60/ft 16.10/ft Discharge Hose (Blue PVCLow Pressure) 11/ 70 max psi 65 max psi 21/ 60 max psi 60 max psi 60 max psi 40 max psi 45 max psi 45 max psi 35 max psi 30 max psi 1 30 max psi Features: 1 30 max psi 1. Ideal for drip irrigation 2. No pig tailing 3. No snaking 4. Twisted yarn assures stability throughout the length of hose 5. Allows many times of use with the convenience of easy coiling for storage 30598 30594 30599 30595 30596 96817 30580 30581 30582 30583 69930 69931 0.2/ft 0.2/ft 0.3/ft 0.4/ft 0.5/ft 0.7/ft 0.9/ft 1.3/ft 1.8/ft 2/ft 2.6/ft 3.1/ft 0.70/ft 1.00/ft 1.30/ft 1.50/ft 2.00/ft 7.00/ft 3.60/ft 6.60/ft 21.00/ft 29.00/ft 50.00/ft 55.00/ft m

Page 35 Suction Hose PVC Suction Hose (CorrugatedRight Spiral) * Left Hand Spiral also available. Please call. PVC Suction Hose (Smooth) ID OD 11/ 1.87" 2.41" 21/ 2.87" 3.5 4.6 5.7 6.9 9.1 11.30" 13.31" 60807 60808 30900 60809 30672 30675 30673 30674 30901 30902 0.4/ft 0.6/ft 0.8/ft 1.0/ft 1.7/ft 2.3/ft 4.1/ft 6.3/ft 9.1/ft 10.1/ft 3.00/ft 4.00/ft 5.60/ft 8.00/ft 12.00/ft 23.00/ft 25.00/ft 42.00/ft 88.00/ft 100.00/ft Towline / Wheelmove ID OD 11/ 1.8 2.3 2 1/ 2.8 3.40" 4.4 5.6 6.5 8.9 11.3 13.39" 60010 60011 69929 60012 60013 60014 60015 60016 30903 30904 0.5/ft 0.7/ft 1.0/ft 1.3/ft 1.9/ft 3.1/ft 4.6/ft 7.1/ft 12.4/ft 15.7/ft 2.20/ft 3.20/ft 4.50/ft 5.50/ft 9.00/ft 16.50/ft 22.00/ft 41.00/ft 103.00/ft 127.00/ft Suction Hose (Black Rubber) ID 11/ 21/ OD DB Clamp# 1.89" 2.40" 3.00" 3.4 400 4.49" 525 5.5 639 6.5 769 8.70" 875 10.71" 1125 12.80" 1360 Max PSI 150 150 100 150 150 150 75 75 45 90 60800 60801 97723 60802 60803 60804 60805 60806 30905 30906 0.8/ft 1.0/ft 1.8/ft 1.5/ft 2.1/ft 3.3/ft 3.8/ft 6.5/ft 9.7/ft 14.1/ft 5.00/ft 6.00/ft 7.00/ft 10.00/ft 13.00/ft 23.00/ft 26.00/ft 44.00/ft 65.00/ft 110.00/ft

Page 36 Hose Clamps Tbolt hose Clamp (zinc plated) Zinc Plated Band, Bolt & Nut Features: 1. Double Galvanization 2. Allen screws allow for tightening in the points where there are space problems 3. Thorough spot welding with high resistance to corrosion 4. Use in agriculture, industry, construction, and wastewater 5. Can be used many times over 6. High resistance to corrosion Tbolt hose clamp (Stainless steel Band w/zinc Plated Hardware) Stainless Steel Band, Zinc Plated Bolt & Nut (Hybrid) **The 1 and 1 Clamps are a two band/ two bolt clamp. Millimeters 2628 2931 3235 3639 4043 4447 4851 5255 5659 6063 6467 6873 7479 8085 8691 9297 98103 104112 113121 122130 131139 140148 149161 162174 175187 188200 201213 214226 227239 240252 Inches 1.021.10 1.141.22 1.261.38 1.421.54 1.571.69 1.731.85 1.892.01 2.052.17 2.202.32 2.362.48 2.522.64 2.682.87 2.913.11 3.153.35 3.393.58 3.623.82 3.864.06 4.094.41 4.454.76 4.805.12 5.165.47 5.515.83 5.876.34 6.386.85 6.897.36 7.407.87 7.918.39 8.438.90 8.949.41 9.459.92 Millimeters Inches 2931mm 1.141.22 3235mm 1.261.38 3639mm 1.421.54 4043mm 1.581.69 4447mm 1.731.85 4851mm 1.892.01 5255mm 2.052.17 5659mm 2.212.32 6063mm 2.362.48 6467mm 2.522.64 6873mm 2.682.88 7479mm 2.913.11 8085mm 3.153.35 8691mm 3.393.59 9297mm 3.623.82 98103mm 3.864.06 104112mm 4.104.41 113121mm 4.454.77 122130mm 4.815.12 131139mm 5.165.48 140148mm 5.525.83 149161mm 5.876.34 162174mm 6.386.86 175187mm 6.907.37 188200mm 7.417.88 201213mm 7.928.39 214226mm 8.438.90 226239mm 8.909.42 240252mm 9.469.93 252275mm 9.9210.83 317330mm 12.4812.99 348374mm 13.7014.72 400425mm 15.7416.78 0.7 Suction 1.0" Discharge 1.0" Suction 1. Discharge 1. Suction 2.0" Discharge 2.0" Suction 2. Discharge 2. Suction 3.0" Discharge 3.0" Suction 4.0" Discharge 4. Suction 4.0" 5.0" Discharge 5.0" Suction 6.0" Discharge 6.0" Suction (For Suction Boot) 8.0" Discharge 8.0" Suction (For Suction Boot) 1.0" Discharge 1.0" Suction 1. Discharge 1. Suction 2.0" Discharge 2.0" Suction 2. Discharge 2. Suction 3.0" Discharge 3.0" Suction 4.0" Discharge 4.0" Suction 5.0" Discharge 5.0" Suction 6.0" Discharge 6.0" Suction (For Suction Boot) 8.0" Discharge 8.0" Suction (For Suction Boot) Discharge Discharge 1 Discharge** 1 Discharge** 30703 30704 30705 30706 30708 95433 30709 30710 95434 30712 30713 30714 30715 30716 30717 95435 30719 30660 30720 30721 30722 30723 30661 30724 30725 30726 30662 30727 30728 30729 96886 96887 96888 96889 96890 96891 96892 96893 96894 96895 96896 96897 96898 96899 96900 96901 96902 96903 96904 96905 96906 96907 96908 96909 96910 96911 96912 96913 96914 97539 97540 97541 97542 Box Qty m 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.7 0.7 0.7 0.8 0.9 0.9 0.9 1.0 1.0 1.0 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 2.00 2.50 2.50 2.70 4.20 5.00 4.50 4.60 5.50 6.20 6.20 6.40 6.40 6.50 6.50 8.50 6.60 7.00 7.00 9.50 9.50 10.00 10.00 11.00 11.00 11.50 12.00 13.50 13.50 15.00 5.50 6.00 6.00 6.00 8.00 8.50 8.50 8.50 8.80 8.80 12.50 12.50 12.50 12.50 12.50 12.50 12.90 12.90 12.90 17.00 17.00 17.50 17.50 18.00 18.00 19.00 19.00 19.00 19.00 24.00 22.00 23.00 24.00

Page 37 Hose Clamps tbolt hose clamp (All stainless steel) All Stainless Steel Band, Bolt & Nut * Ideal for use on waste water and liquid handling hose fittings. All stainless steel. 3/ wide x.025 thick 300 Series Stainless Steel band with Stainless steel bolt. A strong, positive method of assembling hose, duct connections, tubing, and component parts. They are used for high torque applications where ordinary hose clamps fail. They provide a 360 degree sealing surface by using a shoe or formed bridge. Nuts are selflocking, vibration resistant with nylon inserts. Double Bolt Clamp Double Bolt Spiral Clamp * Left Hand Spiral also available. Please call. Right Hand Spiral Left Hand Spiral MillimetersInches 2931mm 1.141.22 3235mm 1.261.38 3639mm 1.421.54 4043mm 1.581.69 4447mm 1.731.85 4851mm 1.892.01 5255mm 2.052.17 5659mm 2.212.32 6063mm 2.362.48 6467mm 2.522.64 6873mm 2.682.88 7479mm 2.913.11 8085mm 3.153.35 8691mm 3.393.59 9297mm 3.623.82 98103mm 3.864.06 104112mm 4.104.41 113121mm 4.454.77 122130mm 4.815.12 131139mm 5.165.48 140148mm 5.525.83 149161mm 5.876.34 162174mm 6.386.86 175187mm 6.907.37 188200mm 7.417.88 201213mm 7.928.39 214226mm 8.438.90 226239mm 8.909.42 240252mm 9.469.93 41/ 51/ 61/ 77/ 9" 1 141/ 17" 1. 2. 1. 2. # 400 # 463 # 525 #550 #600 # 675 # 769 #818 # 875 # 988 # 1125 # 1275 # 1360 #1450 #1700 1.0" Discharge 1.0" Suction 1. Discharge 1. Suction 2.0" Discharge 2.0" Suction 2. Discharge 2. Suction 3.0" Discharge 3.0" Suction 4.0" Discharge 4.0" Suction 5.0" Discharge 5.0" Suction 6.0" Discharge 6.0" Suction (For Suction Boot) 8.0" Discharge 8.0" Suction (For Suction Boot) 3.3.81" 4.04.4 4.24.9 5.00"5.50" 5.50"6.0 6.16.8 6.50"7.5 7.69"8.19" 8.28.8 8.99.8 9.911.3 11.19"13.00" 12.19"14.00" 13.19"15.00" 15.017.50" (For Suction Boot) 69518 69519 69520 69521 69522 69523 69524 69525 69526 69527 69528 69529 69530 69531 69532 69533 69534 69535 69536 69537 69538 69539 69540 69541 69542 69543 69544 69545 69546 95801 30730 95802 95864 95865 30731 95803 95866 30732 95804 30733 30734 95805 95867 95868 95001 69745 95003 69746 30800 30801 30802 30803 95000 95002 97667 97668 97669 97670 97671 97672 97673 97674 97675 97676 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 1.5 1.8 2.3 2.1 3.0 2.7 3.8 5.1 5.6 6.2 9.6 9.5 15.4 16.7 20.9 0.2 0.4 0.5 0.7 11.8 22.8 3.5 4.1 6.00 6.00 6.50 6.50 7.00 7.00 7.00 7.00 7.50 7.50 11.00 11.00 11.00 11.00 11.00 11.00 12.00 12.00 12.00 16.00 16.00 16.00 16.00 17.00 17.00 17.00 18.00 18.00 18.00 12.00 12.00 17.00 17.00 17.00 18.00 22.00 28.00 33.00 38.00 57.00 67.00 84.00 139.00 195.00 9.00 8.50 12.00 9.00 12.70 16.00 20.00 27.00 30.00 39.00 9.00 8.50 12.00 9.00 12.70 16.00 20.00 27.00 30.00 39.00 Towline / Wheelmove

Page 38 NuFlex Tubing & Siphon Tubes Oetiker Clamp (Single Ear) Oetiker ear type clamps "Breathe" and adapt to the expansion and contraction of hose affected by thermodynamics or aging, no need to retighten Clamps are lightweight and compact, important when bulky screwtype clamps interfere with limited space applications Provides a tamperproof seal without damage to the hose Made of zinc plated 1008/1010 carbon steel Features a mechanical lock at the joint instead of a spot weld, preventing failure due to corrosion Low pressure applications 3/ 7/1 15/3 1/ 35/6 9/1 5/ 21/3 11/1 23/3 3/ 13/1 7/ 15/1 1" 11/1 11/ 13/1 15/1 13/ 115/3 19/1 15/ 111/1 1233 13/ 113/1 17/ 115/1 Pinch Clamp Tool.350.414.381.444.394.486.453.524.472.551.496.571.543.618.547.650.594.669.618.728.669.779.716.827.779.890.839.949.8981.008.9451.067 1.0041.126 1.0631.185 1.1811.303 1.2401.362 1.3581.480 1.4371.559 1.4921.614 1.5511.673 1.6101.732 1.6691.791 1.7281.850 1.7871.909 1.8461.968 1.9052.028 96779 96780 96781 96782 96783 96784 96785 96786 96787 96788 96789 96790 96791 96792 96793 96794 96795 96796 96797 96798 96799 96800 96801 96802 96803 96804 96805 96806 96807 96808 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 96809 56.00 WormDrive Clamp (Stainless steel Band w/zinc Plated Hardware) 1/ Wide Stainless Steel Band with Zinc plated Screw. Coldformed stamped band thread, smoothed on the underside, combined with beveled bandedges protects hose from damage. The AISI430 Stainless steel finish of the band and housing make this a very attractive clip. The maximum application pressure can vary depending on the type of hose used and the geometry of the coupling. Materials Screw: Qst 363 Mild Steel (DIN 1.0213) Silverwhite Cr3 ZincPlated Band & Housing: X6Cr17 Stainless Steel (DIN 1.4016) (AISI430) Millimeters 1627 2032 2540 3045 3250 4060 5070 6080 7090 80100 90110 100120 110130 120140 130150 140160 150170 160180 170190 180200 190210 200220 210230 220240 Inches 0.631.06 0.781.25 0.991.38 1.191.78 1.251.97 1.562.34 1.972.75 2.343.16 2.753.53 3.163.94 3.544.33 3.944.72 4.335.12 4.725.51 5.125.91 5.516.30 5.916.69 6.307.09 6.697.48 7.097.87 7.488.27 7.878.66 8.279.06 8.669.45 97595 97596 97597 97598 97599 97600 97601 97602 97603 97604 97605 97606 97607 97608 97609 97610 97611 97612 97613 97614 97615 97616 97617 97618 Box Qty 50 50 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 10 10 10 10 10 10 1.00 1.00 1.00 1.00 1.00 1.50 1.50 1.50 1.50 1.50 2.00 2.00 2.00 2.00 2.00 2.50 2.50 2.50 2.50 3.00 3.00 3.00 3.00 3.00

Page 39 Pipe Section Three Pipe Aluminum & PVC Sprinkler Pipe Standard Aluminum Mainline Pipe Tubing Corrugated Drainage Pipe Heavy Wall Aluminum Pipe Gated Aluminum Pipe Poly Pipe PVC Surface Gated Pipe PVC Surface Accessories PVC Underground Pipe Gates & Gate Socks Pipe Turners Vacuum Pipe

Page 40 NuFlex Tubing & Siphon Tubes NuFlex Layflat Surface Tubing (for flood/furrow irrigation) Dia Length Mil 500' 6 1000' 6 9" 1320' 5 9" 950' 7 1000' 10 1320' 5 950' 7 1320' 7 1320' 8 1000' 10 1 1320' 5 1 1320' 7 1 850' 7 1 600' 10 21" 700' 8 2 700' 8 Max GPM 250 250 449 449 598 898 898 898 898 898 1347 1347 1750 1750 2200 2650 69798 69799 69801 69802 69804 69805 69807 69808 97693 69809 69810 69812 69816 69818 69819 69821 Wt. 19 38 73 73 95 98 98 136 153 126 174 135 135 145 166 71.00 142.00 235.00 235.00 410.00 315.00 315.00 434.00 460.00 410.00 402.00 555.00 425.00 428.00 465.00 526.00 Slide Gate for Surface Tubing 95242 3.50 for other sizes, mil thicknesses and tools. Advantages: 1. Low Cost 2. Reduced Labor Cost 3. New Every Season 4. Less friction loss than aluminum pipe 5. Can be used as mainline or gated pipe Siphon Tubes (Aluminum) PVC Siphon tubes are also available, for Prices. Single Bend Double Bend Triple Bend Size Length Part # List Part # List Part # List 1/2 60 95362 $6.25 95379 $5.80 3/4 54 95380 7.80 3/4 60 95363 8.20 95381 8.20 95405 $8.20 3/4 72 95382 9.40 95406 9.40 1 48 95364 7.10 1 54 95365 9.70 95383 9.70 1 60 95366 10.20 95384 10.20 95407 10.20 1 72 95367 11.70 95385 11.70 95408 11.70 1 90 95409 15.90 11/4 48 95368 9.60 11/4 54 95369 12.20 95386 11.80 11/4 60 95370 11.80 95387 11.80 95410 11.80 11/4 64 95388 14.50 11/4 72 95371 14.50 95389 14.50 95411 14.50 11/4 90 95412 16.60 11/2 48 95372 16.50 11/2 54 95390 16.20 11/2 60 95373 16.20 95391 16.20 95413 16.20 11/2 64 95392 11.80 11/2 72 95374 19.00 95393 19.00 95414 19.00 11/2 90 95415 24.00 2 48 95375 20.30 2 54 95394 22.10 2 60 95376 22.10 95395 22.10 95416 22.10 2 64 95396 26.00 2 72 95377 26.00 95397 26.00 95417 26.00 2 90 95418 33.00 3 60 95378 64.00 95398 64.00 3 72 95399 85.00 3 90 95400 99.00 95419 99.00 4 72 95401 124.00 4 96 95402 146.00 4 120 95420 208.00 5 96 95403 258.00 95421 258.00 5 120 95422 324.00 6 96 95404 325.00 95423 325.00 6 120 95424 411.00

Page 41 Aluminum & PVC Sprinkler Pipe Aluminum x 20' x 30' x 40' 40530 40531 40532.45/ft.42/ft.41/ft x 20' x 30' x 40' 40536 40537 40538.65/ft.61/ft.60/ft Aluminum presson coupler with 1" riser outlet. Gasket and band & hook included. Price excludes riser and sprinkler. x 20' x 30' x 40' 40533 40534 40535.86/ft.82/ft.80/ft Pipe PVC w/spike Coupler x 30' 43510 x 40' 43511 21/ x 30' 21/ x 40' 43512 43513 Has 3/ riser outlet. *See page 53 for spike couplers Pieces/Truckload: Hook & Band 255 143 90 63 Ringlock 195 120 87 63

Page 42 Standard Aluminum Mainline Pipe Plain x 20'.050 x 30'.050 x 40'.050 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 Wall Max PSI 40110 40111 40112 40130 40131 40132 40133 40134 40160 40161 40162 40163 40164 40190 40191 40192 40193 40194.79/ft.77/ft.76/ft 1.25/ft 1.20/ft 1.18/ft 1.15/ft 1.14/ft 1.73/ft 1.65/ft 1.62/ft 1.58/ft 1.56/ft 2.35/ft 2.20/ft 2.13/ft 2.05/ft 2.01/ft Band & Hook Pieces/Truckload: 575 255 143 90 x 20'.050 x 30'.050 x 40'.050 x 10'.051 x 15'.051 x 20',051 x 30'.051 x 40'.051 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 100# 100# 100# 100# 100# 70# 70# 70# 70# 70# 60# 60# 60# 60# 60# 40120 40121 40122 40140 40141 40142 40143 40144 40170 40171 40172 40173 40174 40195 40196 40197 40198 40199.82/ft.79/ft.77/ft 1.53/ft 1.38/ft 1.31/ft 1.24/ft 1.21/ft 2.11/ft 1.90/ft 1.80/ft 1.70/ft 1.65/ft 2.80/ft 2.50/ft 2.35/ft 2.20/ft 2.13/ft Ringlock (Standard Wall) Pieces/Truckload: 195 120 87 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 x 10'.051 x 15'.051 x 20'.051 x 30'.051 x 40'.051 125# 125# 125# 125# 125# 90# 90# 90# 90# 90# 70# 70# 70# 70# 70# 40150 40151 40152 40153 40154 40180 40181 40182 40183 40184 40185 40186 40187 40188 40189 1.81/ft 1.58/ft 1.46/ft 1.34/ft 1.28/ft 2.48/ft 2.15/ft 1.99/ft 1.83/ft 1.75/ft 3.29/ft 2.83/ft 2.59/ft 2.36/ft 2.25/ft

Steel Tubing Page 43 Tubing Diameter (O.D.) Gauge Wall Thickness 11 ga..125 40507 2.4/ft 4.50/ft 21/ 11 ga..125 40508 3.1/ft 5.50/ft 11 ga..083 40509 2.6/ft 6.50/ft 14 ga..083 95146 3.2/ft 6.50/ft 12 ga..105 40510 4.5/ft 9.00/ft 11 ga..125 95145 4.9/ft 10.00/ft 10 ga..135 95137 5.7/ft 13.00/ft 10 ga. SS #304.135 95161 5.7/ft 51.00/ft 12 ga..105 40511 5.6/ft 12.50/ft 11 ga..125 95142 6.3/ft 11.00/ft 10 ga..135 95141 7.2/ft 13.50/ft 14 ga..083 95147 4.8/ft 11.50/ft 12 ga..105 40512 6.8/ft 13.00/ft 10 ga..135 95138 8.6/ft 15.00/ft 10 ga. SS #304.135 95162 8.6/ft 63.00/ft 7 ga. (3/1).188 95151 11.6/ft 24.00/ft 65/ 12 ga..105 40513 7.9/ft 15.00/ft 65/ 10 ga..135 95139 9.6/ft 17.00/ft 65/ 7 ga. (3/1).188 95152 12.9/ft 25.00/ft 14 ga..083 95148 6.5/ft 15.00/ft 12 ga..105 40514 9.0/ft 17.50/ft 11 ga..125 95144 10.3/ft 16.00/ft 10 ga..135 95140 11.6/ft 23.00/ft 10 ga. SS #304.135 95163 11.6/ft 81.00/ft 7 ga. (3/1).188 95153 15.6/ft 32.00/ft 85/ 12 ga..105 40515 12.2/ft 21.50/ft 12 ga..105 40516 11.3/ft 22.00/ft 10 ga..135 95136 14.5/ft 28.00/ft 7 ga. (3/1).188 95150 19.7/ft 40.00/ft 103/ 10 ga..135 95287 15.6/ft 31.00/ft 12 ga..105 40517 13.6/ft 28.50/ft 10 ga..135 95307 17.5/ft 38.00/ft 123/ 10 ga..135 95288 18.3/ft 39.00/ft Pipe Aluminum Tubing Diameter (O.D.) 7" 9" 9" Wall.050.050.050.072.052.078.051.058.083.064.051.064.072.090.051.064.051.064.094.064.094 40540 40541 40520 40542 40543 40544 40521 40522 40545 40546 40523 40524 40547 40548 40621 40529 40525 40526 40549 40550 40551 0.36/ft 0.54/ft 0.73/ft 1.05/ft 0.94/ft 1.42/ft 1.1/ft 1.26/ft 1.81/ft 1.64/ft 1.5/ft 1.88/ft 2.11/ft 2.78/ft 1.75/ft 2.24/ft 1.9/ft 2.38/ft 3.44/ft 2.86/ft 4.19/ft

Page 44 Gated Aluminum Aluminum Gated Pipe.051* x 20' 20" x 20' 30" x 20' 40" x 30' 20" x 30' 30" x 30' 3 x 30' 40" x 40' 20" x 40' 30" x 40' 40" Gates/Pipe 12 8 6 18 12 10 40 24 16 12 40310 40320 40330 40311 40321 40323 40331 40312 40322 40332 1.18/ft 1.18/ft 1.18/ft 1.15/ft 1.15/ft 1.15/ft 1.15/ft 1.14/ft 1.14/ft 1.14/ft *Gates included, but not installed. x 20' 20" x 20' 30" x 20' 40" x 30' 20" x 30' 30" x 30' 3 x 30' 40" x 40' 20" x 40' 30" x 40' 40" 12 8 6 18 12 10 9 24 16 12 40340 40350 40360 40341 40351 40353 40361 40342 40352 40362 1.62/ft 1.62/ft 1.62/ft 1.58/ft 1.58/ft 1.58/ft 1.58/ft 1.56/ft 1.56/ft 1.56/ft x 20' 20" x 20' 30" x 20' 40" x 30' 20" x 30' 30" x 30' 3 x 30' 40" x 40' 20" x 40' 30" x 40' 40" 12 8 6 18 12 10 9 24 16 12 40370 40380 40390 40371 40381 40383 40391 40372 40382 40392 2.13/ft 2.13/ft 2.13/ft 2.05/ft 2.05/ft 2.05/ft 2.05/ft 2.01/ft 2.01/ft 2.01/ft Corrugated Plastic Drainage Pipe Available perforated or nonperforated. Please call for fittings. Smooth Interior: 1 1 2 1 1 2 40700 40701 40702 40703 40704 40705 40706 40707 40708 40709 40710 40711 40712 40713 * Quantity and Truckload Discounts available. Please.

Page 45 PVC Surface Gated Pipe PVC Surface Gated (Standard Wall) Wall x 30' plain.12 x 30' 20".12 x 30' 30".12 x 30' 3.12 x 30' 40".12 43305 43311 43321 43300 43331 1.5/ft 1.5/ft 1.5/ft 1.5/ft 1.5/ft Standard wall x 30' plain.12 x 30' 20".12 x 30' 30".12 x 30' 3.12 x 30' 40".12 43306 43341 43351 43301 43361 2.0/ft 2.0/ft 2.0/ft 2.0/ft 2.0/ft x 30' plain.12 x 30' 20".12 x 30' 30".12 x 30' 3.12 x 30' 40".12 43307 43371 43381 43302 43391 2.5/ft 2.5/ft 2.5/ft 2.5/ft 2.5/ft *Above w/b&h will take 2025 psi Compatible w/aluminum pipe and fittings Adjustable Telescopic Coupler x 30' plain.12 x 30' 20".12 x 30' 30".12 x 30' 3.12 x 30' 40".12 43308 43320 43324 43322 43323 3.0/ft 3.0/ft 3.0/ft 3.0/ft 3.0/ft Pipe PVC Surface Gated (Light Wall) x 30' plain.10 x 30' 20".10 x 30' 30".10 x 30' 3.10 x 30' 40".10 43600 43601 43602 43603 43604 1.25/ft 1.25/ft 1.25/ft 1.25/ft 1.25/ft x 30' plain.09 x 30' 20".09 x 30' 30".09 x 30' 3.09 x 30' 40".09 43309 43330 43334 43402 43403 1.6/ft 1.6/ft 1.6/ft 1.6/ft 1.6/ft Light wall x 30' plain.10 x 30' 20".10 x 30' 30".10 x 30' 3.10 x 30' 40".10 43310 43404 43405 43406 43407 2.1/ft 2.1/ft 2.1/ft 2.1/ft 2.1/ft *Above w/b&h will take 2025 psi.

Page 46 Heavy Wall Aluminum & Accessories Ringlock (Heavy Wall) Big Gun Female Coupler x Full Male Aluminum Ring. Ringlock Clamp included. x 20'.058 x 30'.058 x 40'.058 x 20'.064 x 30'.064 x 40'.064 x 20'.064 x 30'.064 x 40'.064 Wall Max PSI 150# 150# 150# 150# 150# 150# 125# 125# 125# 40220 40221 40222 40260 40261 40262 40290 40291 40292 1.53/ft 1.44/ft 1.39/ft 2.23/ft 2.11/ft 2.06/ft 2.79/ft 2.65/ft 2.58/ft Twist Lock Pipe x 20'.050 x 30'.050 x 40'.050 x 20'.051 x 30'.051 x 40'.051 x 20'.058 x 30'.058 x 40'.058 x 20'.064 x 30'.064 x 40'.064 Wall Max PSI 150# 150# 150# 150# 150# 150# 150# 150# 150# 125# 125# 125# 40715 40716 40717 40718 40719 40720 40721 40722 40723 40724 40725 40726 Replacement Coupler (PVC Surface) 43392 43393 43394 44400 1.5 3.0 3.5 4.0 35.00 49.00 52.00 66.00 Repair Splicer (PVC Surface) 43395 43396 43397 44401 0.5 1.0 1.0 1.5 12.00 15.00 20.00 25.00 Steel Collar (PVC Surface) 43398 43399 43400 43401 1.3 1.6 2.0 2.5 8.00 9.00 10.50 11.50 Caplock (PVC Surface) 44402 44403 44404 44405 33.00 36.00 40.00 45.00 Features: 1. Easy to use 2. Saves time and money 3. Insert the plug and snap on the caplock

Page 47 Vacuum Pipe Aluminum Vacuum Pipe Tough, durable aluminum vacuum pipe is available in a number of types of connections. We also manufacture vacuum fittings such as elbow, tees, end plugs, etc. Size Length Wall Type Part # 4 5 0.072 Cast Alum Ball/Socket w/lever 95062 164.00 4 10 0.072 Cast Alum Ball/Socket w/lever 95063 190.00 4 15 0.072 Cast Alum Ball/Socket w/lever 95064 219.00 4 20 0.072 Cast Alum Ball/Socket w/lever 95065 249.00 4 25 0.072 Cast Alum Ball/Socket w/lever 95066 279.00 4 30 0.072 Cast Alum Ball/Socket w/lever 95067 310.00 6 5 0.083 Cast Alum Ball/Socket w/lever 95068 279.00 6 10 0.083 Cast Alum Ball/Socket w/lever 95069 335.00 6 15 0.083 Cast Alum Ball/Socket w/lever 95070 399.00 6 20 0.083 Cast Alum Ball/Socket w/lever 95071 459.00 6 25 0.083 Cast Alum Ball/Socket w/lever 95072 519.00 6 30 0.083 Cast Alum Ball/Socket w/lever 95073 585.00 8 5 0.094 Cast Alum Ball/Socket w/lever 95074 510.00 8 10 0.094 Cast Alum Ball/Socket w/lever 95075 605.00 8 15 0.094 Cast Alum Ball/Socket w/lever 95076 700.00 8 20 0.094 Cast Alum Ball/Socket w/lever 95077 795.00 8 25 0.094 Cast Alum Ball/Socket w/lever 95078 900.00 8 30 0.094 Cast Alum Ball/Socket w/lever 95079 985.00 Size Length Wall Type Part # 4 5 0.072 Cast Alum Ring Lock w/rlc 95098 125.00 4 10 0.072 Cast Alum Ring Lock w/rlc 95099 150.00 4 15 0.072 Cast Alum Ring Lock w/rlc 95100 180.00 4 20 0.072 Cast Alum Ring Lock w/rlc 95101 210.00 4 25 0.072 Cast Alum Ring Lock w/rlc 95102 240.00 4 30 0.072 Cast Alum Ring Lock w/rlc 95103 270.00 6 5 0.083 Cast Alum Ring Lock w/rlc 95104 180.00 6 10 0.083 Cast Alum Ring Lock w/rlc 95105 240.00 6 15 0.083 Cast Alum Ring Lock w/rlc 95106 300.00 6 20 0.083 Cast Alum Ring Lock w/rlc 95107 365.00 6 25 0.083 Cast Alum Ring Lock w/rlc 95108 425.00 6 30 0.083 Cast Alum Ring Lock w/rlc 95109 485.00 8 5 0.094 Cast Alum Ring Lock w/rlc 95110 230.00 8 10 0.094 Cast Alum Ring Lock w/rlc 95111 330.00 8 15 0.094 Cast Alum Ring Lock w/rlc 95112 420.00 8 20 0.094 Cast Alum Ring Lock w/rlc 95113 520.00 8 25 0.094 Cast Alum Ring Lock w/rlc 95114 610.00 8 30 0.094 Cast Alum Ring Lock w/rlc 95115 705.00 Pipe

Page 48 PVC Underground Pipe Diameter O D I D Thickness SDR 50# PVC Gasketed Pipe * PIP PIP PIP PIP 1 PIP *Solvent *1 PIP 6.14 8.16 10.20 12.24 15.30 16.000 5.989 7.958 9.948 11.938 14.922 15.608.760.101.126.151.189.196 81 81 81 81 81 81 40610 40650 40681 40691 40695 40696 1.1/ft 1.7/ft 2.6/ft 3.8/ft 5.8/ft 6.5/ft 80# PVC Gasketed Pipe PIP PIP PIP PIP 1 PIP 1 PIP 21" PIP 2 PIP 27" PIP 6.14 8.16 10.20 12.24 15.30 18.70 22.05 24.80 27.95 5.90 7.84 9.80 11.76 14.70 17.96 21.19 23.83 26.86.12.16.20.24.30.37.43.49.55 51 51 51 51 51 51 51 51 51 40620 40660 40682 40692 40697 40800 40802 40804 40806 1.5/ft 2.6/ft 4.1/ft 6.1/ft 9.4/ft 14.3/ft 19.8/ft 26.1/ft 33.6/ft 100# PVC Gasketed Pipe IPS 4.50 41 40644 1.0/ft IPS IPS IPS IPS PIP PIP PIP PIP 1 PIP 1 PIP 21" PIP 2 PIP 27" PIP 6.63 8.63 10.75 12.75 6.14 8.16 10.20 12.24 15.30 18.7 22.05 24.8 27.95 6.30 8.21 10.23 12.13 5.84 7.76 9.70 11.64 14.46 17.78 20.97 23.59 26.59.162.210.262.311.150.199.249.299.373.456.538.605.683 41 41 41 41 41 41 41 41 41 41 41 41 41 40850 40851 40852 40853 40630 40670 40683 40693 40698 40801 40803 40805 40807 2.2/ft 3.6/ft 5.7/ft 8.0/ft 1.9/ft 3.3/ft 5.1/ft 7.5/ft 11.7/ft 17.6/ft 24.6/ft 32.4/ft 41.8/ft 125# PVC Gasketed Pipe *Solvent 11/ IPS* IPS 21/ IPS IPS IPS IPS IPS IPS IPS PIP PIP PIP PIP 1 PIP 1.77 2.38 2.88 3.50 4.50 6.63 8.63 10.75 12.75 6.14 8.16 10.20 12.24 15.30 1.380 2.229 2.195 2.830 4.224 6.217 8.095 10.088 11.966 5.762 7.658 9.572 11.49 14.36.197.073.088.108.138.204.265.331.392.189.251.314.377.471 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 32.5 43501 43504 40814 40815 40639 40855 40856 40857 40858 40640 40680 40684 40694 40699 0.4/ft 0.3/ft 0.5/ft 0.7/ft 1.3/ft 2.7/ft 4.6/ft 7.1/ft 9.9/ft 2.3/ft 4.2/ft 6.4/ft 9.4/ft 14.8/ft All PVC is in 20' or 40' lengths. Gaskets are included. for installed prices. Pieces/Truckload: 50# PIP 285 158 103 70 80/100/125# PIP 261 143 90 63 125/160# IPS 210 110 72

Page 49 PVC Underground Pipe Diameter OD ID Thickness SDR 160# PVC Gasketed Pipe *Solvent 1" IPS* 11/ IPS* 11/ IPS IPS 21/ IPS IPS IPS IPS IPS IPS IPS 1.66 1.90 2.38 2.88 3.50 4.50 6.63 8.63 10.75 12.75 1.532 1.754 2.193 2.655 3.230 4.154 6.115 7.961 9.924 11.77 0.064 0.073 0.091 0.110 0.135 0.173 0.255 0.332 0.413 0.490 26 26 26 26 26 26 26 26 26 26 26 40816 43502 43503 43505 43506 43508 40671 40672 40673 40674 40808 0.2/ft 0.3/ft 0.4/ft 0.6/ft 0.9/ft 1.6/ft 3.4/ft 5.7/ft 8.9/ft 12.67/ft 200# PVC Gasketed Pipe *Solvent 1/ IPS* 3/ IPS* 1" IPS* 11/ IPS* 11/ IPS IPS 21/ IPS IPS IPS IPS IPS IPS IPS.84 1.05 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625 10.75 12.75.716.930 1.189 1.502 1.720 2.149 2.601 3.166 4.072 5.993 7.805 9.728 11.54 0.022 0.060 0.063 0.079 0.090 0.113 0.137 0.167 0.214 0.316 0.410 0.500 0.606 13.5 21 21 21 21 21 21 21 21 21 21 21 21 40817 40818 43500 40819 40820 43507 40821 40822 40809 40810 40811 40812 40813 0.098/ft 0.122/ft 0.164/ft 0.259/ft 0.338/ft 0.530/ft 0.776/ft 1.154/ft 1.900/ft 4.150/ft 7.055/ft 10.99/ft 15.53/ft Pipe Schedule 40 PVC Pipe (Solvent) 1/ 3/ 1" 11/ 11/ 21/ 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625 0.612 0.824 1.049 1.380 1.610 2.067 2.469 3.068 4.026 6.065 7.962 0.109 0.113 0.133 0.140 0.145 0.154 0.203 0.216 0.237 0.280 0.332 40823 40824 40825 40826 40827 40828 40829 40830 40831 40832 40833 0.164/ft 0.219/ft 0.325/ft 0.440/ft 0.526/ft 0.708/ft 1.123/ft 1.469/ft 2.090/ft 3.680/ft 5.590/ft Schedule 80 PVC Pipe (Solvent) 1/ 3/ 1" 11/ 11/ 21/ 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625 0.546 0.742 0.957 1.278 1.500 1.939 2.323 2.900 3.826 5.761 7.625 0.147 0.154 0.179 0.191 0.200 0.218 0.276 0.300 0.337 0.432 0.500 40834 40835 40836 40837 40838 40839 40840 40841 40842 40843 40844 0.205/ft 0.278/ft 0.409/ft 0.567/ft 0.686/ft 0.949/ft 1.449/ft 1.938/ft 2.833/ft 5.446/ft 8.270/ft All PVC is in 20' or 40' lengths. Gaskets are included. for installed prices. Pieces/Truckload: 50# PIP 285 158 103 70 80/100/125# PIP 261 143 90 63 125/160# IPS 210 110 72

Page 50 Gates Dam Gate 40460 40461 0.1 0.1 1.25 1.25 Fits standard 11/ x 25/ Rectangle Hole Features: 1. Quick easy installation 2. Designed for use in either PVC or aluminum pipe 3. Fits standard 1 1/ x 2 5/ rectangular openings 4. Fits TexFlo openings 5. New design allows easier slide adjustments 6. Spring tension is at the center for equal sealing at front and rear of the gate 7. Manufactured from special materials to minimize environmental effects 8. UV inhibitor is added to help protect against the sun's ultra violet radiation 9. Water flow 90 GPM at 6 feet of head Roughneck Gate Rectangle, Rectangle, Keyhole, Keyhole, 40219 40200 40201 69789 0.1 0.1 0.1 0.1 0.75 2.70 2.70 2.70 Rectangle Fits standard 11/ x 25/ Rectangle Hole Roughneck gates preform better in sunlight and will not stick to Alum or PVC pipe. Keyhole Features: 1. Can be adjusted again and again to maintain leakproof seats 2. Screw interlock holds tension until you change it. Adjustable gates substantially reduce water leakage. 3. Interlocking feature of top and screwhead reduces the possibility of the screw loosening 4. No tools are necessary to install or remove gate 5. Built with the most durable material available for irrigation gates and have no metal parts to corrode. Keyhole Gate 40436 40441 0.1 0.1 1.45 1.45 1. The triad keyhole gate is a fresh approach to irrigation gate problems. The spring mechanism is so unique a patent has been applied for. 2. Easiest keyhole gate on the market to install. 3. Manufactured from specially selected materials to minimize environmental effects 4. Fits standard keyhole openings 5. Excellent water flow, 60 GPM at 6 feet of head

Page 51 Gates Hastings Gate Universal, 9" Round Front, Round Front, 9" Conversion, 15/x41/ Hole 40462 40463 40464 40465 0.1 0.1 0.1 0.2 1.40 1.80 1.60 3.95 Universal (will fit round front gate hole) Round Front Features: 1. Up to 85 GPM with a 4 head 2. Open, adjust and closes easily from a standing position with just the tap of a stick 3. Yellow Top: made of high strength, longlasting natural polypropylene 4. Bottom: spring tension holds the gate firmly in any position in which the gate is set. Gasket is firmly molded to the bottom, holding it tightly against the pipe. 5. Gasket: new, improved design of molded synthetic rubber. This new material is more flexible, conforms more readily to the contour of the pipe Pipe NuSlide Gate Rubber Bottom only Screw (need 2/gate) 40495 40496 4.10 0.40 Oval Gate one size 40470 0.2 2.20 Features: 1. Easily installed in a standard recessed oval hole (ames type) 2. Improved frame design 3. Flow rate 60 gallons per minute at 1 foot of head, full open 4. Easily adjustable slide regulates water flow 5. Manufactured from specially selected materials to improve weatherability

Page 52 Gates & Gate Socks Gate Sock Clip Round Round Round Round 40480 40481 40482 40483 0.2 0.2 0.2 0.2 2.90 3.25 3.25 3.50 Gate Sock Vinyl Coated Polyester 40490 0.1 4.50 *3 long with closed end Pipe Turner 9" 40475 40476 40477 40478 40479 10.3 11.3 12.3 12.3 12.8 135.00 160.00 160.00 160.00 160.00 Gate Tool 61814 5.00 Pull Apart Tool With Groove Without Groove For PVC Pipe 81429 81430 95286 63.00 63.00 126.00 w/groove wo/groove

Page 53 Gun Stands/Sprinklers Section Four Volume Gun Stands Sprinklers Gun Stands Trailers, Travelers & Accessories Gear Drive Sprinklers Sprinkler Charts Gun Stands/Sprinklers Splice Kit Hose Pull Coupler Nozzles Pressure Regulator

Page 54 Traveler Parts Soft and Hard Hose Travelers Replacement Parts Cables Turbines Etc.

Page 55 Volume Gun Stands Gun Stand (Fold Down Model A) (Aluminum) 50110 40 415.00 Hook style. Aluminum. With male threaded top. Recommended Guns: Nelson 100 Komet 101 River Skipper Gun Stand (Standard Model B) (Aluminum) 50120 48 780.00 Ideal stand for: 1. Hard to reach corners areas 2. Liquid manure applications 3. Pivot corners Ringlock. Aluminum. With male threaded top. Water filled base for superior stability Recommended Guns: Small Medium Large Giant Sprinkler Stand (Galvanized steel) Recommended Guns: Nelson 100 Komet 101 River Skipper With male or female threaded top. Specify size. Gun Cart (Galvanized steel) * With FPT & 21/ MPT top. * Gun is not included. See pages 6673. * Standard Profile * 57" Wheels * Male B&H and B&L Recommended Guns: Nelson 100 Komet 101 River Skipper 50130 50131 50132 50133 23 25 26 27 270.00 295.00 375.00 445.00 50140 116 785.00 Gun Stands/Sprinklers Gun Stand (Model LE) (Aluminum) Recommended Guns: Nelson 100 Komet 101 River Skipper 50150 97694 97695 20 510.00 510.00 525.00 * With FPT/21/ MPT Top. * State mainline size when ordering. * 30" Riser Length.

Page 56 Sprinkler Carts Sprinkler Cart 1000F w/funny Sprinkler 97720 1250K 1250H w/k1 Sprinkler w/hidra Sprinkler 97721 97722 25 38 46 265.00 415.00 555.00 * To order just the sprinkler see page 68. All nozzles shown are included 3/ Female Hose Swivel connection All nozzles shown are included 11/ MPT connection All nozzles shown are included 11/ MPT connection

Page 57 Traveling Sprinkler & Gun Adapters Traveling Sprinkler (Raincoach ) 96812 56 3,365.00 1" FHT Inlet Economical Alternative for large turf areas Brass, aluminum, and stainless steel constriction provides unmatched durability Combines 3/ impact brass head with rotating sweep arms for full, even coverage Includes six nozzle set Allows for adjustable speed of travel for varied precipitation rates Minimizes turf scarring with front roller Equipped with 3/3 x 450' galvanized steel cable tow line Provides stable operation on rough terrain with wide/long wheel base Builtin valve shuts off water automatically at the end of run FIVE YEAR WARRANTY Throw: 110145' Flow: 11.522.4 GPM PSI at Sprinkler: 5575psi Gun Outlet (Cast Aluminum) 2. fpt 2. fpt 2. fpt 95243 95244 95245 3.5 4.5 5.5 100.00 110.00 159.00 Small "Guns" may be used on this sturdy outlet. The base is drilled for attaching a board for support of the sprinkler gun. Gun Stands/Sprinklers Adapter (Giant Sprinkler) Weld On x Male Weld On x Female 69790 69791 3.5 4.0 55.00 88.00 Weld On x Male Weld On x Female 81427 81426 5.0 5.5 55.00 95.00 * Use std RLC Ringlock Clamp Ringlock Clamp 61047 61038 1.4 1.6 17.00 17.00

Page 58 Trailers, Travelers & Accessories Pipe Trailer Traveler Cable Single Tongue Double Tongue Maximum capacity of 4,000 lbs. For pipe up to 40' in length Dimensions: 35' overall length 10 wide 21' from stake pocket to stake pocket 14' from tongue to front stake pocket 2,700' 5/1 x 1,350' 3/ x 1,350' 7/1 x 2,700' 7x19 7x19 7x19 50540 50550 95183 95182 69585 700 735 1,995.00 2,395.00 750.00 970.00 Bullet Stop 5/1 3/ 95181 95180 49.00 28.00 Foam Pig 71/ For Hose Size 45 6 8 95309 96967 95310 96966 34.00 26.00 38.00 55.00 Soft Hose (Replacement) 2 1/ x 660' x 660' 3 1/ x 660' x 660' 41/ x 660' x 660' x 660' 69616 69617 69618 50583 50584 69619 69620 330 396 528 660 792 924 10 year limited warranty Cover allows maximum flexibility and good bend radius Ease of repair and restoration of damaged hoses to full working performance Long term storage stability and extended working life Superior resistance to ozone and ultraviolet light Sludge Injection Hose L.W.T. x 660' (Sludge Injection) 41/ x 660' (Sludge Injection) x 660' (Sludge Injection) 51/ x 660' (Sludge Injection) x 660' (Sludge Injection) x 660' (Sludge Injection) x 660' (Sludge Injection) 50596 50597 97343 97582 97583 97827 97828 627 666.6

Page 59 Hose Menders Hose Mender (For Hard Hose, BandIt) Hose ID 2.1" 2. 3.0" 3.7 4.1" 4. 5.0" 61827 61828 61829 61830 61831 61832 61833 350.00 381.00 606.00 640.00 676.00 640.00 695.00 Hose Mender (For Hard Hose, Screw) *Instructions Included Hose Mender w/clamps (for Soft Hose) Hose ID 0.90" 1. 1.1 1.30" 1.40" 1.4 1.60" 1.67" 1.80" 1.90" 2.00" 2. 2.30" 2.50" 2.70" 3.00" 3.30" 3.70" 4.00" 4. 4.20" 4.50" 4.60" Complete Hose ID 21/ w/clamps w/clamps 31/ w/clamps w/8 Bandit Clamps 41/ w/8 Bandit Clamps w/8 Bandit Clamps w/8 Bandit Clamps 97682 97677 97573 97678 97679 97574 97680 97575 97681 97576 97683 61820 97686 61821 97684 61822 97577 69792 97685 61824 97579 61825 97580 50588 50589 50590 50585 50586 50591 50592 9.5 10.6 180.00 85.00 125.00 98.00 101.00 200.00 125.00 235.00 149.00 235.00 165.00 165.00 295.00 293.00 295.00 306.00 295.00 305.00 350.00 372.00 420.00 360.00 450.00 225.00 275.00 339.00 130.00 135.00 197.00 202.00 Gun Stands/Sprinklers *Instructions Included Hard Mender Only (1/ Wall x Long) 21/ Steel 97570 Steel 97571 31/ Steel 97572 Steel 96763 41/ Steel 96764 Steel 96765 Steel 96766 7.1 8.3 32.00 35.00 40.00 53.00 55.00 105.00 100.00 41/ Aluminum Aluminum Aluminum Aluminum 50600 50601 50602 50603 2.9 3 3.7 4 108.00 180.00 215.00 185.00

Page 60 Hose Pull Coupler Hose Pull Coupler Hose x Discharge 2. x Cast Aluminum x Cast Aluminum x Cast Aluminum x Cast Aluminum 4. x Cast Aluminum 4. x Cast Aluminum x Cast Aluminum x Cast Aluminum 61800 61801 61802 61804 61805 61806 61807 81446 11 11 12.1 250.00 670.00 445.00 459.00 540.00 585.00 460.00 470.00 *Instructions Included *Clamps for 4/x HPC (1/ Wide) #25229340 * Cast Aluminum 4. x Steel 68041 118 865.00 Plastic Wedge (for Hose pull Coupler) 41/ 96833 96834 59.00 65.00 Back to Back coupler w/chains 97568 97344 97345 97346 5 6 7 8.5 175.00 187.00 189.00 190.00 * Painted Steel Weldon coupler w/chains 97569 97347 97348 97349 2.5 3 3.5 4.3 65.00 67.00 68.00 69.00 * Black Steel 3 Link Chain 97342 0.8 20.00 * Weld to coupler for hose pull coupler connection. * Black Steel

Page 61 Sprinklers 1/ Base (brass) 20 JH w/nozzlerainbird full / brass 70109 0.5 25.72 20 JH 20 JH Straight Bore Nozzle Stream Height 6' PSI @ 7/6 1/ 9/6 5/3 Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM 35 38 2.05 38 2.68 39 3.39 39 4.19 40 38 2.19 39 2.86 40 3.62 39 4.47 45 39 2.32 39 3.03 40 3.84 40 4.73 50 39 2.45 39 3.20 40 4.05 40 5.00 55 39 2.57 40 3.35 40 4.24 40 5.23 60 39 2.68 40 3.50 41 4.43 41 5.47 These sprinklers are widely used on all types of solid set systems, on center pivots, and in general field applications because of their construction and reliability. Excellent performance in low to medium application rates. Nonclog vane (mounted in entrance end of nozzle) in 20EJH model assures top performance under windy conditions. Small nozzle sizes; low flow rates "E" model has nonclog vane in nozzle for greater distance of throw Durable brass construction; excellent for many types of field applications Superior "H" bearing for longer life Standard trajectory angle for maximum distance of throw Low water application rate; ideal for heavy soils and slopes Common Spacings Range: 20 x 35 ft to 40 x 50 ft 6 x 9 m to 12 x 15 m 1/ BasePart Turn (Plastic) 429 PT, w/nozzlenaan part / plastic 70296 0.2 13.00 Gun Stands/Sprinklers 429 PT 429 NOZZLES Orange Green Blue Black Nozzle Nozzle Nozzle Nozzle 7/6 1/ 9/6 5/3 PSI @ Nozzle GPM Dia. GPM Dia. GPM Dia. GPM Dia. 15 1.80 66 2.30 67 2.70 69 20 1.60 66 2.10 68 2.50 69 3.10 70 30 2.00 70 2.60 75 3.00 77 3.80 80 40 2.30 74 3.00 78 3.40 82 4.40 83 50 2.60 77 3.30 82 3.80 84 4.90 85 60 2.90 79 3.70 84 4.20 86 5.40 90 1/ mpt

Page 62 Sprinklers 3/ Base (Brass) 30 H w/nozzlesrainbird full / brass 70110 0.9 45.56 30 H Straight Bore Nozzle Straight Bore Nozzle w/spreader Stream Height 9' Stream Height 9' 9/6 5/3 11/6 3/1 9/6 x 5/3 x 11/6 x 3/3 3/3 3/3 PSI @ Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM PSI @ Nozzle 3/1 x 3/3 3/1 x 1/ Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 25 40 2.90 41 3.50 41 4.30 42 5.10 25 40 4.20 41 4.80 41 5.60 42 6.40 42 7.40 30 40 3.10 42 3.90 44 4.70 45 5.60 30 40 4.60 42 5.30 44 6.10 45 7.10 45 8.10 35 41 3.40 43 4.20 45 5.10 47 6.00 35 41 4.90 43 5.70 45 6.60 47 7.50 47 8.70 40 41 3.60 44 4.50 46 5.40 48 6.40 40 41 5.20 44 6.10 46 7.00 48 8.10 48 9.30 45 42 3.80 44 4.70 46 5.70 49 6.80 45 42 5.60 44 6.50 46 7.40 49 8.50 49 9.90 50 42 4.10 45 5.00 47 6.10 50 7.20 50 42 5.90 45 6.80 47 7.90 50 9.00 50 10.40 55 43 4.20 45 5.20 48 6.30 50 7.60 55 43 6.10 45 7.10 48 8.20 50 9.40 50 10.90 60 43 4.40 46 5.50 48 6.60 51 7.90 60 43 6.40 46 7.40 48 8.60 51 9.90 51 11.40 65 44 4.60 46 5.80 49 6.90 51 8.20 65 44 6.70 46 7.80 49 8.90 51 10.20 51 11.80 70 44 4.80 47 5.90 49 7.20 52 8.50 70 44 6.90 47 8.10 49 9.30 52 10.70 52 12.30 75 45 5.00 47 6.10 50 7.40 52 8.80 75 45 7.20 47 8.30 50 9.60 52 11.00 52 12.70 80 45 5.10 48 6.30 50 7.70 53 9.10 80 45 7.50 48 8.70 50 10.00 53 11.50 53 13.10 3/ Base (Brass) WR33 w/nozzleswade Rain full / brass 97526 1 21.00 WR33 Single Nozzle w/plug 27 Deg. Trajectory (No Vane) PSI @ 1/ 9/9 6 5/3 11/6 3/1 13/6 7/3 Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 25 40 2.88 41 3.52 42 4.24 43 5.00 43 5.90 44 6.85 30 41 3.15 43 3.85 44 4.64 46 5.50 47 6.50 48 7.55 35 41 3.40 44 4.16 45 5.02 47 6.00 49 7.05 50 8.20 40 42 3.64 44 4.45 46 5.37 48 6.40 50 7.55 51 8.80 45 41 3.05 42 3.86 45 4.72 47 5.70 49 6.80 51 8.00 52 9.35 50 42 3.22 43 4.07 45 4.98 48 6.01 50 7.20 52 8.45 53 9.90 55 42 3.38 43 4.27 46 5.22 48 6.30 51 7.50 52 8.85 54 10.40 60 43 3.53 44 4.46 46 5.45 49 6.57 51 7.90 53 9.25 54 10.75 65 43 3.68 44 4.65 47 5.68 49 6.83 52 8.20 53 9.60 55 11.10 70 43 3.82 45 4.83 47 5.90 50 7.09 52 8.50 54 9.95 55 11.40 75 44 3.96 45 5.00 48 6.11 50 7.34 53 8.80 54 10.25 56 11.70 80 44 4.09 46 5.17 48 6.30 51 7.58 53 9.10 55 10.50 56 12.00 Double Nozzle 27 Deg. Trajectory (No Vane) 9/6 x 5/3 x 11/6 x 3/1 x 3/1 x 13/6 x 7/3 x PSI @ 3/3 3/3 3./3 3/3 1/ 1/ 1/ Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 25 40 4.18 41 4.83 42 5.55 43 6.31 43 7.40 43 8.30 44 9.25 30 41 4.58 43 5.28 44 6.07 46 6.93 46 8.15 47 9.15 48 10.20 35 41 4.95 44 5.71 45 6.57 47 7.51 47 8.83 49 9.93 50 11.10 40 42 5.29 44 6.11 46 7.03 48 8.03 48 9.46 50 10.65 51 11.90 45 42 5.61 45 6.48 47 7.46 49 8.53 49 10.05 51 11.30 52 12.65 50 43 5.91 45 6.82 48 7.87 50 9.00 50 10.60 52 11.90 53 13.35 55 43 6.20 46 7.15 48 8.25 51 9.45 51 11.10 52 12.50 54 14.00 60 44 6.48 46 7.47 49 8.60 51 9.86 51 11.60 53 13.00 54 14.50 65 44 6.75 47 7.78 49 8.93 52 10.27 52 12.10 53 13.50 55 15.00 70 45 7.00 47 8.08 50 9.25 52 10.66 52 12.50 54 14.00 55 15.45 75 45 7.25 48 8.37 50 9.56 53 11.02 53 12.90 54 14.40 56 15.90 80 46 7.49 48 8.65 51 9.87 53 11.36 53 13.25 55 14.80 56 16.30 3/ BasePART TURN (Brass) 35A TNT 35 TNT w/nozzlerainbird part / brass 70150 1.5 77.08 Straight Bore Nozzle Stream Height 9' PSI @ 5/3 11/6 3/1 Nozzle Rad. GPM Rad. GPM Rad. GPM 30 42 3.90 43 4.60 44 5.50 35 43 4.20 44 5.00 46 6.00 40 44 4.50 45 5.40 47 6.40 45 44 4.70 46 5.70 48 6.90 50 45 5.00 47 6.00 49 7.20 55 45 5.20 48 6.30 50 7.50 60 46 5.40 48 6.60 51 7.90 Part / full circle brass impact sprinklers Standard trajectory angle for maximum distance of throw Medium nozzle sizes and flow rates "PJ" model has PJ TM ; eliminates side splash "DA" model has adjustable deflector for reducing distance of throw "ADJ" model has adjustable diffuser pin for stream breakup

3/ Base (Plastic) Sprinklers Page 63 46 H w/nozzlesrainbird full / plastic 70120 0.3 23.18 46 H Straight Bore Nozzle Straight Bore Nozzle w/spreader Stream Height 9' Stream Height 9' 5/3 11/6 3.1 13/6 5/3 x 11/64 x 3/1 x 3/3 3/3 1/ PSI @ Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM PSI @ Nozzle 13/6 x 1/ 7/3 x 1/ Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 45 47 5.00 48 6.10 52 6.90 54 8.10 45 47 6.60 48 7.60 52 10.20 54 11.30 53 12.70 50 48 5.20 49 6.40 52 7.30 56 8.40 50 48 6.90 49 8.00 52 10.70 56 12.00 54 13.00 55 49 5.40 50 6.50 53 7.70 57 8.80 55 49 7.20 50 8.30 53 11.20 57 12.50 55 13.90 60 49 5.60 51 6.80 54 8.00 58 9.20 60 49 7.50 51 8.60 54 11.60 58 13.00 56 14.50 65 50 5.80 51 7.20 55 8.30 59 9.60 65 50 7.80 51 8.90 55 12.00 59 13.50 57 14.90 70 50 6.10 52 7.50 56 8.70 60 10.10 70 50 8.10 52 9.20 56 12.40 60 13.90 58 15.40 75 51 6.30 53 7.80 57 9.00 61 10.50 75 51 8.40 53 9.50 57 12.70 61 14.30 59 15.80 80 51 6.50 53 8.10 57 9.20 62 10.60 80 51 8.60 53 9.70 57 13.00 62 14.70 59 16.20 Durable engineeringgrade plastic construction; excellent for many types of field applications Standard trajectory angle for maximum distance of throw Sprinkler has built in vane in plastic "Plus" nozzle for greater distance of throw Superior "H" bearing for longer life Brass 7 degree or 20 degree spreader nozzle This sprinkler series is used in general irrigation applications, and on permanent and solid set systems, including center pivots. Wearing quality is excellent. The body, arm, bearing nipple and bearing sleeve are molded from Delrin. Plastic nonclog vane in nozzle ensures excellent performance in wind. Plastic plug on "W" models. Common Spacings Range: 50 x 50 ft to 60 x 60 ft 15 x 15 m to 18 x 18 m 3/ Base (Brass) 14070H w/nozzlesrainbird full / brass 70155 1.3 68.00 Straight Bore Nozzle Stream Height 10' 5/3 11/6 3/1 13/6 7/3 15/6 PSI @ 1/ 17/6 9/3 Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 25 44 5.10 45 6.00 46 7.00 46 8.00 47 9.10 48 10.30 48 11.50 30 47 5.60 48 6.60 49 7.60 50 8.80 51 10.00 51 11.20 52 12.60 35 46 4.20 47 5.10 49 6.10 50 7.10 51 8.20 52 9.50 52 10.80 53 12.00 54 13.60 40 46 4.50 48 5.40 50 6.50 51 7.60 52 8.80 53 10.10 54 11.50 55 13.00 56 14.60 45 47 4.80 49 5.80 51 6.90 52 8.10 54 9.30 55 10.70 56 12.20 57 13.80 58 15.40 50 48 5.00 50 6.10 52 7.20 53 8.50 55 9.80 56 11.30 57 12.90 58 14.50 59 16.30 55 48 5.30 50 6.40 53 7.60 54 8.90 56 10.30 54 11.80 59 13.50 59 15.20 61 17.10 60 49 5.50 51 6.70 53 7.90 55 9.30 57 10.80 58 12.40 60 14.10 61 15.90 62 17.80 65 49 5.70 52 6.90 54 8.30 56 9.70 58 11.20 59 12.90 61 14.70 62 16.50 63 18.50 70 50 5.90 52 7.20 55 8.60 57 10.00 59 11.60 60 13.40 62 15.20 63 17.20 65 19.20 75 50 6.20 53 7.40 55 8.90 58 10.40 60 12.10 61 13.80 63 15.70 80 50 6.40 53 7.70 56 9.10 58 10.70 61 12.40 62 14.30 64 16.30 Gun Stands/Sprinklers 14070H Straight Bore Nozzle w/spreader Stream Height 10' 3/1 x 13/6 x 7/3 x 1/ 1/ 1/ PSI @ Nozzle 15/6 x 1/ x 17/6 x 9/3 x 1/ 1/ 1/ 1/ Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 25 44 7.40 45 8.30 46 9.20 46 10.30 47 11.40 47 12.50 48 13.80 30 47 8.10 48 9.10 49 10.10 50 11.20 54 12.40 51 13.70 52 15.10 35 49 8.70 50 9.80 51 10.90 52 12.10 52 13.40 53 14.80 54 16.30 40 50 9.30 51 10.50 52 11.70 53 13.00 54 14.40 55 15.80 56 17.40 45 51 9.90 52 11.10 54 12.40 55 13.80 56 15.20 57 16.80 58 18.50 50 52 10.40 53 11.70 55 13.10 56 14.50 57 13.10 58 17.70 59 19.50 55 53 10.90 54 12.30 56 13.70 57 15.20 59 16.90 59 18.60 61 20.40 60 53 11.40 55 12.80 57 14.30 58 15.90 60 17.60 61 19.40 62 21.30 65 54 11.90 56 13.30 58 14.90 59 16.50 61 18.30 62 20.20 63 22.20 70 55 12.40 57 13.80 59 15.40 60 17.20 62 19.00 63 21.00 65 23.00 75 55 12.80 58 14.30 60 16.00 61 17.80 63 19.70 80 56 13.20 58 14.80 61 16.50 62 18.40 64 20.30

Page 64 Sprinklers 11/ Base (Brass) 80 E (FULL CIRCLE) 85 EHD (PART TURN) 85 EHDLA (PART TURN) 97761 97762 97763 5.0 5.3 5.3 332.34 379.40 379.40 80 E 85 EHD 27 o 27 o 85 EHDLA 17 o These sprinklers are widely used as end guns on center pivot machines. Nonclog straightening vanes assure good coverage in the wind. The 85EHDLA was specifically developed for use in the highly abrasive water conditions normally experienced on center pivot machines. It gives excellent performance even in extreme winds due to a speciallydrilled low angle (17 degree) body. In addition, these models are suitable for a wide variety of applications such as horse pastures, paddocks, arenas, feedlots, dust control, sod farms, or any other applications requiring the performance of a 1 1/ / 32mm Sprinkler. Standard trajectory angle for maximum distance of throw Largest nozzle sizes and highest flow rates in brass part circle sprinklers "LA" model recommended for pivots and linears "ESHD" model has spreader nozzle; "EWSHD" model has plugged spreader outlet; "EHDLA" has single nozzle body Durable heavy brass construction; excellent for many types of field applications "HDLA" model has heavy duty features for longer life in dirty water Heavier trip components Locking friction collars Stainless steel trip lever pads and trip stops Stainless steel replaceable spoon Superior "H" bearing Straight Bore Nozzle w/spreader Stream Height 14' 11/3x 7/3 PSI @ 3/ x 7/3 13/3 x 7/3 7/1 x 7/3 15/3 x 7/3 Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 25 61 23.30 62 26.50 64 29.60 66 32.90 66 36.40 30 64 25.60 65 29.10 68 32.40 69 36.10 72 40.00 35 67 27.70 68 31.40 72 35.10 74 39.00 77 43.30 40 69 29.60 71 33.60 75 37.60 77 41.80 80 46.30 45 71 31.50 73 35.70 77 39.90 79 44.40 82 49.20 50 73 33.20 75 37.70 79 62.10 81 46.80 94 51.90 55 75 34.90 77 39.70 81 44.30 83 49.10 86 54.70 60 77 36.50 79 41.40 83 46.60 86 51.50 88 57.20 65 79 38.00 81 43.20 84 48.60 87 53.80 90 59.80 70 81 40.10 83 44.90 86 50.40 89 55.90 91 62.10 75 82 41.00 84 46.70 87 52.40 90 57.90 93 64.30 80 83 42.60 86 48.30 89 54.30 92 60.00 94 66.70 85 85 43.80 87 49.80 90 56.00 93 62.00 96 68.80 90 86 45.70 89 51.40 92 57.90 95 63.90 97 70.70 95 87 46.60 90 53.00 93 59.60 96 65.80 98 72.80 100 88 47.90 91 54.50 94 61.20 97 67.50 99 74.80 Common Spacings Ratings 80 x80 ft to 140 x 140 ft 24 x 24 m to 42 x 42 m 1" BasePART TURN (Brass) 65PJADJTNT Part / full circle brass impact sprinklers Standard trajectory angle for maximum distance of throw Larger nozzle sizes and higher flow rates "PJ" arm eliminates side splash Adjustable diffuser pin for stream breakup This sprinkler has a wide range of applications. Added versatility comes from an adjustable trip slippin that converts the sprinkler to full circle applications. The PJ precision jet arm eliminates side splash. 65JADJTNT 70160 3.6 249.41 Straight Bore Nozzle Stream Height 10' PSI @ Nozzle 1/ Rad. GPM 50 57 12.90 55 57 13.60 60 58 14.20 65 62 14.90 70 63 15.40 75 64 16.00 80 65 16.50 Specifications: Bearing Size / Type 1 in / 25 mm female NPT/BSP Body trajectory 27 degrees Materials: Body: Cast Bronze Arm: Cast Bronze Bearing Sleeve: Brass Bearing Nipple: Brass All Springs: Stainless Steel All Washers: Chemically Resistant

Page 65 Sprinklers 1" Base (Brass) 70CWH 70CWH w/nozzlesrainbird full / brass 70130 3.0 185.03 Straight Bore Nozzle w/plug Stream Height 8' 7/3 1/ 9/3 5/1 11/3 3/ 13/3 PSI @ Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 40 57 8.80 60 11.50 62 14.60 65 17.70 66 21.10 68 24.40 70 28.50 45 58 9.40 61 12.20 64 15.50 66 18.90 68 22.50 70 26.00 72 30.40 50 59 9.90 62 12.90 65 16.30 68 20.00 70 23.80 71 27.50 73 32.30 55 60 10.40 63 13.60 66 17.20 71 21.00 71 25.00 73 29.10 75 34.00 60 61 10.90 64 14.20 67 18.00 71 22.00 73 26.20 74 30.60 77 35.70 65 62 11.40 65 14.80 68 18.80 72 23.00 74 27.40 76 32.00 78 37.30 70 63 11.80 66 15.40 70 19.50 73 23.90 76 28.50 77 33.20 79 38.90 75 64 12.20 67 16.00 71 20.30 74 24.80 77 29.60 78 34.50 81 40.40 80 65 12.60 68 16.50 72 20.90 75 25.70 78 30.60 80 35.70 82 41.80 Medium trajectory angle for maximum distance of throw Larger nozzle sizes and higher flow rates "SPH" has rear spreader nozzle; "WH" has plugged spreader nozzle Both models have nonclog vane in body range tube for greater distance of throw Durable heavy brass construction; excellent for many types of field applications Superior female "H" bearing for longer life 1" Base (Plastic) Straight Bore Nozzle w/spreader Stream Height 8' 7/3 x 1/ x 9/3 x 1/ 1/ 1/ 5/1 x 11/3 x 3/ x 13/3 x PSI @ 1/ 1/ 1/ 1/ Nozzle Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM Rad. GPM 40 57 11.60 60 14.30 62 17.40 65 20.50 61 23.90 68 27.20 70 31.40 45 58 12.40 61 15.20 64 18.50 66 21.90 68 25.50 70 29.00 72 33.40 50 59 13.00 62 16.00 65 19.40 68 23.10 70 26.90 71 30.60 73 35.50 55 60 13.70 63 16.90 66 20.40 70 24.30 71 28.30 73 32.40 75 37.40 60 61 14.30 64 17.60 67 21.40 71 25.40 73 29.60 74 34.00 77 39.20 65 62 15.00 65 18.40 69 22.40 72 26.60 74 31.00 76 35.60 78 40.90 70 63 15.50 66 19.10 70 23.20 73 27.60 75 32.20 77 36.90 79 42.70 75 64 16.00 67 19.80 71 24.10 74 28.60 77 33.40 78 38.30 81 44.30 80 65 16.50 68 20.40 72 24.80 75 29.60 78 34.50 80 39.60 82 45.80 7025 w/nozzlessenninger #7025 Arm OnlySenninger These sprinklers are designed for general field use and for use on mechanically moved systems especially center pivot machines. This series has a modified 3washer bearing with features that are similar to the 3/4 in / 20 mm "H" bearing. Although not designated, the 70CWH and 70CSPH have a plastic nonclog straightening vane to ensure excellent performance even in extreme winds. Low precipitation rates can be obtained from the single nozzle "W" model. It has a spreader option designated "SP" for applications where additional closein water is needed Common Spacings Range 60 x 80 ft to 90 x 120 ft 18 x 24 m to 24 x 30 m full / plastic 70140 70141 1.1 0.3 63.20 18.10 Gun Stands/Sprinklers 7025 7025 Arm Sprinkler Base Pressure (psi) 35 40 45 50 55 60 65 70 #14 Nozzle (7/3) Flow (gpm) 8.11 8.66 9.2 9.69 10.2 10.6 11 11.5 Diam. At 1.5' ht. (ft.) 106 111 113 115 117 119 121 123 Diam. At 6.0' ht. (ft.) 114 118 121 124 126 128 129 130 #16 Nozzle (1/) Flow (gpm) 10.7 11.4 12.1 12.8 13.4 14 14.6 15.1 Diam. At 1.5' ht. (ft.) 111 117 120 123 126 129 131 133 Diam. At 6.0' ht. (ft.) 122 126 129 131 134 136 137 138 #18 Nozzle (9/3) Flow (gpm) 13.3 14.2 15 15.9 16.6 17.4 18.1 18.8 Diam. At 1.5' ht. (ft.) 118 124 127 129 134 139 142 144 Diam. At 6.0' ht. (ft.) 128 132 135 137 141 144 146 147 #20 Nozzle (5/1) Flow (gpm) 16 17.1 18.2 19.2 20.1 21 21.8 22.7 Diam. At 1.5' ht. (ft.) 124 130 134 137 142 146 150 153 Diam. At 6.0' ht. (ft.) 133 137 140 143 147 151 154 155 #22 Nozzle (11/3) Flow (gpm) 19.3 20.5 21.8 22.9 24.1 25.1 26.1 27.1 Diam. At 1.5' ht. (ft.) 126 133 141 148 153 157 160 162 Diam. At 6.0' ht. (ft.) 136 141 146 150 155 159 162 164 #24 Nozzle (3/) Flow (gpm) 22.4 23.9 25.3 26.7 28 29.3 30.4 31.6 Diam. At 1.5' ht. (ft.) 130 138 145 151 156 160 166 169 Diam. At 6.0' ht. (ft.) 138 145 150 155 160 164 167 170

Page 66 Nelson Volume Guns F100 w/nozzlenelson F150R w/nozzlenelson F200 w/nozzlenelson SR100 w/nozzlenelson SR150 w/nozzlenelson SR200 w/nozzlenelson full full full part part part 70230 70240 70280 70295 70250 70290 20.5 43.0 56.0 26.5 49.0 78.0 874.72 1,801.80 2,929.00 1,336.72 2,228.80 4,121.00 Nelson SR100 Nelson SR150 Nelson SR200 * Includes one nozzle on all guns. * Includes flg x fpt adapter on 150 & 200 guns.

Page 67 Komet (twin) Volume Guns 101/SR w/nozzletwin 18 0 pivot Twin 101/Plus PC24 deg Twin 101/Plus PCVA 1028 deg Twin 101/Plus FC24 deg Waste Water Twin 101/Plus PC24 deg part 70231 69769 69770 69771 69772 20.9 20.9 23.2 18.7 20.9 1,235.00 1,235.00 1,577.00 926.00 1,358.00 Waste Water Twin 101/Plus PCVA 1028 deg Waste Water Twin 101/Plus FC24 deg Dust Suppression, Twin 101/Plus PC44 deg Dust Suppression, Twin 101/Plus PCVA 2824 deg 69773 69774 69775 69776 23.2 18.7 20.9 23.2 1,737.00 1,020.00 1,358.00 1,736.00 Komet 101/SR * Includes one nozzle on all guns. * Includes flg x fpt adapter and gasket on 140, 160 & 202 guns. Available in 18 o, 21 o, or 24 o angle trajectory Twin 140/Plus PCVA 1028 deg Dust Suppression, Twin 140/Plus PC44 deg Dust Suppression, Twin 140/Plus PCVA 2846 deg Twin 160/Plus PC24 deg Twin 160/Plus PCVA 1628 deg Twin 160/Plus FC24 deg Waste Water Twin 160/Plus PC24 deg Waste Water Twin 160/Plus PCVA 1628 deg Waste Water Twin 160/Plus FC24 deg Twin 202/Plus PCVA 1628 deg 140/SR w/nozzle 24 deg 202/SR w/nozzle 24 deg 69777 69778 69779 69780 69781 69782 69783 69784 69785 69786 70251 70300 22.1 22.1 25.4 29.8 34.2 25.4 29.8 34.2 25.4 35.3 22.1 30.9 2,123.10 1,928.10 2,330.10 2,019.10 2,649.10 1,530.10 2,217.10 2,908.10 1,677.10 2,797.10 1,758.10 2,233.10 Twin 101 Taper bore nozzle >>> Trajectory 24 Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle PSI 0.47 0.55 0.63 0.71 0.79 0.87 0.94 GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. 30 48 187 62 201 79 217 97 232 118 247 140 260 40 40 183 55 203 72 220 91 234 112 250 136 265 162 279 50 45 197 62 215 80 232 102 250 125 267 152 283 181 300 60 50 212 67 230 88 247 111 266 138 282 167 298 198 315 70 54 225 73 244 95 262 120 280 149 297 180 314 214 323 80 57 237 78 257 102 276 129 294 159 312 192 329 229 344 90 61 248 83 269 108 289 137 308 169 326 204 343 243 359 100 64 257 87 280 114 300 144 320 178 339 215 357 256 374 110 67 265 91 290 119 310 151 331 186 351 225 369 268 388 N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy Twin 140 Taper bore nozzle >>> Trajectory 24 Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle PSI 0.63 0.71 0.79 0.87 0.94 1.02 1.10 1.18 GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. 30 62 201 79 217 97 232 118 247 140 260 164 275 191 286 219 300 40 72 220 91 234 112 250 136 265 162 279 190 293 220 307 253 318 50 80 232 102 250 125 267 152 283 181 300 212 315 246 330 283 343 60 88 247 111 266 138 282 167 298 198 315 233 331 270 347 310 360 70 95 262 120 280 149 297 180 314 214 323 251 347 291 362 334 376 80 102 276 129 294 159 312 192 329 229 344 269 361 311 376 358 391 90 108 289 137 308 169 326 204 343 243 359 285 376 330 392 379 407 100 114 300 144 320 178 339 215 357 256 374 300 390 348 407 400 422 110 119 310 151 331 186 351 225 369 268 388 315 404 365 421 419 437 120 125 318 158 341 195 362 235 380 280 400 329 416 381 432 437 448 Gun Stands/Sprinklers Twin 160 Taper bore nozzle >>> Trajectory 24 PSI Nozzle 0.69 Nozzle 0.79 Nozzle 0.89 Nozzle 0.98 Nozzle 1.08 Nozzle 1.18 Nozzle 1.28 Nozzle 1.38 GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. 40 85 221 110 229 139 239 172 254 208 268 248 279 291 291 337 301 50 95 256 123 269 156 284 192 302 233 317 277 333 325 348 377 364 60 104 283 135 294 171 315 211 334 255 350 303 367 356 386 413 401 70 113 296 146 308 184 332 227 350 275 371 328 390 384 407 446 422 80 120 305 156 321 197 345 243 364 294 384 350 404 411 421 476 436 90 128 310 165 329 209 352 258 374 312 395 371 413 436 429 506 444 100 135 314 174 334 220 357 272 379 329 401 392 418 459 434 533 450 110 141 317 182 336 231 359 285 382 345 404 411 421 482 438 559 453 120 147 318 191 339 241 363 298 385 360 407 429 424 503 442 584 456 N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy Twin 202 Taper bore nozzle / Trajectory 24 PSI Nozzle 0.79 Nozzle 0.89 Nozzle 0.98 Nozzle 1.08 Nozzle 1.18 Nozzle 1.28 Nozzle 1.38 Nozzle 1.48 Nozzle 1.58 GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. GPM DIA. 40 110 229 139 239 172 254 208 268 248 279 291 291 337 301 387 309 440 319 50 123 269 156 284 192 302 233 317 277 333 325 348 377 364 433 377 492 388 60 135 294 171 315 211 334 255 350 303 367 356 386 413 401 474 414 539 427 70 146 308 184 332 227 350 275 371 328 390 384 407 446 422 512 435 582 447 80 156 321 197 345 243 364 294 384 350 404 411 421 476 436 547 450 622 458 90 165 329 209 352 258 374 312 395 371 413 436 429 506 444 580 457 660 465 100 174 334 220 357 272 379 329 401 392 418 459 434 533 450 612 461 696 470 110 182 336 231 359 285 382 345 404 411 421 482 438 559 453 642 465 730 473 120 191 339 241 363 298 385 360 407 429 424 503 442 584 456 670 469 762 476 N.B.: Performance data were obtained under ideal testing conditions and may be adversely affected by wind and other factors. Pressure refers to pressure at nozzle. A lowered trajectory angle improves the irrigation efficiency in windy

Page 68 Sprinklers Small sprinklers Sime Funny K1 Hidra 1" FPT 11/ FPT 11/ FPT 97717 97718 97719 71.00 125.00 215.00 FUNNY (28⁰ Trajectory) 1" FNPT Nozzle 5mm (.20") Nozzle 6mm (.2) Nozzle 7mm (.2) Nozzle 9mm (.3) PSI GPM Diameter GPM Diameter GPM Diameter GPM Diameter 22 5.3 84 7 86 10 92 16.4 100 29 6 92 8.5 96 11 100 19 108 44 7 100 10 108 14 112 23 122 58 9 108 12 116 16 122 26 128 Funny Sprinkler K1 (30⁰ Trajectory) 1.2 FNPT Connection Nozzle 8mm (.31) Nozzle 9mm (.35) Nozzle 10mm (.39) Nozzle 12mm (.47) PSI GPM Diameter GPM Diameter GPM Diameter GPM Diameter 22 13 102 16 108 20 112 29 112 29 15 112 19 114 23 118 34 124 44 18 124 23 128 28 134 41 136 58 21 134 26 138 33 144 47 154 K1 Sprinkler HIDRA (25⁰ Trajectory) 1. FNPT Connection Nozzle 12mm (.47") Nozzle 14mm (.5) Nozzle 16mm (.6) Nozzle 18mm (.71") Hidra Sprinkler PSI GPM Diameter GPM Diameter GPM Diameter GPM Diameter 29 40 130 52 138 65 144 44 48 156 63 164 80 170 100 184 58 56 176 73 190 93 196 115 202 73 62 196 81 202 103 216 128 224 88 140 236 Small Sprinklers Komet #163 11/ FPT 97826 325.00

Page 69 Nozzles & Press Regulators Nozzle (For 3/ Sprinkler) Order vane separately. Range 1/ Range 9/6 Range 5/3 Range 11/6 Range 3/1 Range 13/6 Range 7/3 Range 15/6 Range 1/ Range 17/6 Range 9/3 Back Plug Spreader 7 o 3/3 Spreader 7 o 7/6 Spreader 7 o 1/ Spreader 7 o 9/6 Spreader 7 o 5/3 Spreader 7 o 11/6 Spreader 7 o 3/1 Spreader 7 o 13/6 Spreader 7 o 7/3 Spreader 20 o 3/3 Spreader 20 o 7/6 Spreader 20 o 1/ Spreader 20 o 9/6 Spreader 20 o 5/3 Spreader 20 o 11/6 Spreader 20 o 3/1 Spreader 20 o 13/6 Spreader 20 o 7/3 Vanes for #30 (pushin).125.140625.15625.171875.1875.203125.21875.234375.25.265625.28125.09375.109375.125.140625.15625.171875.1875.20313.21875.09375.109375.125.140625.15625.171875.1875.20313.21875 70360 70330 70331 70332 70333 70334 70335 70336 70337 70338 70339 70342 97804 97805 97806 97807 97808 97809 97810 97812 97811 70340 70366 70341 70362 70361 70364 70365 97813 70363 69692 1.61 1.61 1.61 1.61 1.61 1.61 1.61 1.61 1.61 1.61 1.61 0.92 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 1.34 0.60 Nozzle (For 1" Sprinkler) Brass: Range 7/3 Range 1/ Range 9/3 Range 5/1 Range 11/3 Range 3/ Range 13/3.21875.25.28125.3125.34375.375.40625 70343 70344 70345 70346 70347 70348 70349 7.13 7.13 7.13 7.13 7.13 7.13 7.13 Gun Stands/Sprinklers *Above for Rainbird #65 & #70 Plastic: Range #14 7/3 Range #16 1/ Range #18 9/3 Range #20 5/1 Range #22 11/3 Range #24 3/.21875.25.28125.3125.34375.3375 70350 70351 70352 70353 70354 70355 2.05 2.05 2.05 2.05 2.05 2.05 *Above for Senninger #7025 Bearing Assembly (For #30 Rainbird) 70356 10.80

Page 70 River Gear Drive Sprinklers River (P190) River w/nozzle part 70325 10.4 395.00 River 190 28 Degree Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 29 120 23 0.4 10 37 132 26 44 136 28 1 1/ FPT base Includes 3 nozzles 120' 228' Diameter Pos. 02 Part #10053 0.47 12 0.55 14 0.63 16 0.71 18 56 150 33 37 136 38 44 144 41 51 156 44 56 170 47 37 136 51 44 150 56 51 164 61 66 176 68 44 164 73 51 176 79 56 188 84 70 204 94 44 164 92 56 204 107 70 216 119 85 228 131 Pos. 05 Part #10054 Pos. 020 Part #10365 Pos. 042 Part #10055 Geardriven sprinklers are ideal for use on delicate seeds and plants or on heavy soils where light, gentle applications are required. Smooth running, continuous rotation makes these ideal for use on tripods, travelers or as an end sprinkler on pivots. All nozzles come complete with 22 o and 28 o trajectory nozzles. Companion flanges included. Advantages of "Sime" green Italian geardriven volume sprinklers Smooth, continuous rotation with superior stream breakup and less vibration compared to impact driven guns. Gentle sweeps are ideal for tender crops such as carrots, spinach, green beans, etc. Give better coverage due to their rapid rotation (average 90 seconds). Will run in lower temperatures without freezing. Includes flip nozzles allowing one gun to have 22 & 28 degree capabilities. Full & partcircle arc adjustments require no tools. Priced lower than impactdriven volume guns. Optional 25 o nozzle available.

Page 71 River Gear Drive Sprinklers River Pos # Part # Pos # Part # 1 30168 Sprinkler Body 153.10 25 30201 Spring House 5.10 2 30169 Gearbox 40.30 26 30203 Inversion Spring 1.80 02 10053 Whole Head 310.60 27 30204 Cover 2.80 02am 10169 Complete American Gearbox 446.20 28 30205 Gear Z11 15.75 03 10378 Cover w/ Bearing 11.40 29 30206 Gear Z14 9.50 4 30172 Internal Body 46.60 30 30207 Cover 6.90 05 10054 Complete Crown 192.50 32 20031 Shafting Bar 10.10 05a 10380 Crown 78.80 33 20032 Shafting Bar Cover 8.10 5b 30175 Toothed Ring 36.30 34 30208 Elastic Pin 1.00 6 30176 UPacking 8.30 35 30209 Inversion Lever Cover 4.80 7 30177 Sphere 0.40 36 3021010 Nozzle 10Mm (.0040 ), River 10.50 8 30178 Rectifier 12.90 36 3021012 Nozzle 12Mm (.0047 ), River 10.50 9 30620 Worm Carter 29.93 36 3021014 Nozzle 14Mm (.0055 ), River 10.50 10 30180 External Body Bearing 7.50 36 3021016 Nozzle 16Mm (.0063 ), River 10.50 10a 30181 Internal Body Bearing 5.60 36 3021018 Nozzle 18Mm (.0071 ), River 10.50 11 30182 Pinion Bearing 4.80 36a 3010451 Rubber Nozzle 12 30183 Grub Screw 1.60 37 30211 Nozzle Lock Ring 7.10 13 30184 Inversion Lever 9.50 38 30567 Packing For Nozzle 1.60 014 10084S Complete Shaft 17.00 039 10091S Complete JetBreaker 14.00 15 30186 Propeller 26.30 41 30214 Spring For Lever 4.00 15a 30677 DuBearing For Gearbox 8.00 42 30215 Stream Breaker Lever 9.30 16 30628 Endless Screw 35.00 042 10055 Complete Stream Breaker Lever 19.70 16a 30187 Grub Screw 1.60 42a 30216 Grub Screw 1.00 017 10293 Bearing House 26.30 43 30217 Screw For Lever 8.00 17a 30189 Du Bearing 10.50 44 30218 Nut 3.20 18 30190 Blind Bearing 12.60 45 30219 Grub Screw 1.60 19 30191 Toothed Wheel 22.90 46 30220 Screw 1.00 Gun Stands/Sprinklers 20 30192 Gearbox Pinion 11.20 47 30221 Crown Screws 6x12 0.80 020 10365S Complete Pinion 35.00 048 10398S Shaft Bearing 11.00 20a 30193 Pin For Pinion 1.00 48a 30223 Washer 1.60 21 30109 Gearbox Gear 16.00 049 10087S Inversion Cotter Pin 10.90 22 30195 Gearbox Shaft 13.20 50 30227 Cam 3.20 022 10459 Pin Head.00 51 30228 Elastic Pin 0.40 22a 30196 Elastic Pin 1.00 52 30229 Screw 2.40 023 10411 Gearbox Support 30.60 53 30230 Washer 0.40 23a 30198 Ball Bearing 20.20 54 30231 Grease Nipple 1.80 24 30199 Screw 0.80 57 30232 Nut 0.40 24a 30200 Nut 0.40 58 30233 Grease Nipple 0.90 59 30234 Grease Nipple 4.00

Page 72 Skipper Gear Drive Sprinklers Skipper (P191) Skipper w/nozzle high speed Skipper Tool (to open gear box) part 70303 69582 9.4 410.00 32.00 1 1/ FPT Includes 3 nozzles. 144' 268' Diameter COD. 10134 Skipper 191 28 Degree Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 0.4 10 0.47 12 0.55 14 Skipper COD. 10134 IDROMECCANICA SRL Rev. 04 05/2013 COD. 10134 0.63 16 0.71 18 0.78 20 0.86 22 0.94 24 29 120 23 37 132 26 44 136 28 56 150 33 29 144 42 44 164 51 56 184 59 70 202 66 29 156 51 44 176 66 56 196 76 70 216 86 29 170 68 44 190 83 56 208 96 70 228 107 29 182 54 44 202 106 56 222 124 70 242 137 29 196 93 44 216 106 56 242 124 70 268 163 44 236 161 51 254 186 56 274 209 44 248 167 51 262 193 56 282 215 Deduct 2% for 25 deg and 5% for 22 deg nozzles. Skipper IDROMECCANICA SRL Rev. 04 05/2013 Pos. 042 Part #10150 Skipper IDROMECCANICA SRL Rev. 04 05/2013 Pos. 019 Part #10501 Pos. 02 Part #10148 Pos. 05n Part #10149 CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE 10402 01 57.45 30831 15a 12.08 3010449 36b 6.60 10366 059 15.26 10148 02 92.01 30628 16 11.55 30211 37 1.59 30778 59a 0.23 10170 02am 92.01 30187 16a 0.23 3010443 37a 6.91 30779 60 2.54 30737 2 13.14 10293 017 8.69 30567 38 0.28 301093 61 0.87 Pos. 078 Part 30738 #10451 3 6.57 30190 18 3.50 10183 039 5.15 10295 062 15.16 30739 4 14.63 10501 019 12.51 30764 41 0.85 30782 62a 0.28 10149 05n 66.36 3010533 19 6.23 10150 042 8.65 30783 63 0.13 CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE 10473 PREZZO 05c 26.08 CODICE 30833 POSIZIONE19aPREZZO 6.23 30765 42 2.97 30785 64a 0.21 CODE Pos. N 058 POSITION Part #10191 PRICE CODE N POSITION PRICE CODE N POSITION 3010377 PRICE 5d 14.73 CODE N 30755 POSITION20 PRICE 3.29 30217 43 2.97 30786 65 0.93 10402 01 57.45 30831 15a 12.08 3010449 3010489 36b 5eaus 6.60 62.33 10366 30193 059 20a 15.260.13 30218 44 1.63 30677 66 2.08 10148 02 92.01 Pos. 30628 062 Part 16 #10295 11.55 30211 37 10461 05eaus 1.59 139.92 30778 10255 59a 022 0.239.88 30767 46 0.08 30189 67 2.10 10170 02am 92.01 30187 16a 0.23 3010443 30743 37a 6.91 30779 60 10.75 2.54 6 2.52 10256 022a 30768 47 0.05 30233 68 0.28 30077 7 0.08 30758 23 0.87 20112 48 10.60 30959 75 0.19 30737 2 13.14 10293 017 8.69 30567 38 30178 0.28 301093 61 0.87 8 2.27 30835 23a 0.87 30734 48a 0.21 3010378 76 2.52 30738 3 6.57 30190 18 3.50 10183 039 30745 9 5.15 11.98 10295 30836 062 24 15.165.98 30770 50 6.00 3010379 77 0.57 30739 4 14.63 10501 019 12.51 30764 41 30745 9b 0.85 11.98 30782 30613 62a 28 0.280.40 30771 51 3.75 10451 078 7.70 10149 05n 66.36 3010533 19 6.23 10150 042 30746 10 8.65 2.01 30783 30678 63 29 0.130.15 30578 52 0.32 3010380 78 0.85 10473 05c 26.08 30833 19a 6.23 30765 42 30747 10a 2.97 1.91 30785 30227 64a 30 0.210.95 30772 53 0.08 3010381 79 1.25 3010377 5d 14.73 30755 20 3.29 30217 43 30832 10b 2.97 0.13 30786 30228 65 31 0.93 0.08 30773 54 0.38 3010382 79a 1.40 11 0.74 20107 32 3.35 30774 55 6.68 3010383 80 1.99 3010489 5eaus 62.33 30193 20a 0.13 30218 30748 44 1.63 30677 66 2.08 30183 12 0.23 20162 33 2.82 30837 56 4.22 10461 05eaus 139.92 10255 022 9.88 30767 46 20108 13 0.08 5.94 30189 30185 67 34 2.106.30 30838 56a 0.32 30743 Schumacher 6 2.52Irrigation, 10256 Inc. 022a 10.75 Phone: 30768 4022463685 47 20109 14 0.05 4.88 or 8002463685 30233 30216 68 35 0.280.15 30839 Fax: 56b 4022462072 0.13 30077 7 0.08 30758 23 0.87 20112 48 30752 14b10.60 0.19 30959 30566 75 36 0.192.01 30511 57 0.21 30178 8 2.27 30835 23a 0.87 30734 48a 30753 15 0.21 7.74 3010378301035476 36i 2.522.01 10191 058 8.90 30745 9 11.98 30836 24 5.98 30770 50 6.00 3010379 77 0.57 30745 9b 11.98 30613 28 0.40 30771 51 3.75 10451 078 7.70 30746 10 2.01 30678 29 0.15 30578 52 0.32 3010380 78 0.85 30747 10a 1.91 30227 30 0.95 30772 53 0.08 3010381 79 1.25

Page 73 Skipper Gear Drive Sprinklers Skipper Pos # Part # Pos # Part # 01 10402S Sprinkler Body 179.40 36 3056624 Nozzle, Standard 25, 24mm (.0094 ) 11.50 2 30737 Gearbox 40.30 36i 301035410 Nozzle, Flip 22 /28, 10mm (.0040 ) 12.70 02 10148S Complete Gearbox 279.90 36i 301035412 Nozzle, Flip 22 /28, 12mm (.0047 ) 12.70 02am 10170 Complete Head 285.08 36i 301035414 Nozzle, Flip 22 /28, 14mm (.0055 ) 12.70 3 30738 Gearbox Cover 17.50 36i 301035416 Nozzle, Flip 22 /28, 16mm (.0063 ) 12.70 4 30739 Internal Body 43.30 36i 301035418 Nozzle, Flip 22 /28, 18mm (.0071 ) 12.70 05c 10473 Crown (New) 36i 301035420 Nozzle, Flip 22 /28, 20mm (.0078 ) 12.70 5d 3010377 Ring Crown 28.00 36i 301035422 Nozzle, Flip 22 /28, 22mm (.0086 ) 12.70 5eaus 3010489 Crown 36i 301035424 Nozzle, Flip 22 /28, 24mm (.0094 ) 12.70 05eaus 10461 Full Crown 36b 3010449 Nozzle 05n 10149S Complete Mounted Crown 37 30211 Nozzle Lock Ring 7.10 6 30743 UPacking 8.30 37a 3010443 Ring AU 7 30077 Sphere 1.00 38 30567 Packing For Nozzle 1.60 8 30178 Rectifier 12.90 039 10183S JetBreaker 25.00 9 30745 Body Endless Screw 38.00 41 30764 JetBreaker Ring 4.80 10 30746 External Bearing 6.30 42 30765 JetBreaker Lever 8.80 10a 30747 Internal Bearing 12.00 042 10150 Complete JetBreaker Lever 27.00 10b 30832 Bushing 6.30 43 30217 Screw For Lever 8.00 11 30748 Pinion Bearing 4.80 44 30218 Nut 3.20 12 30183 Grub Screw 1.60 46 30767 Screw 0.50 13 20108 Threaded Ring For Crown 20.00 47 30768 Screw 0.50 14 20109 Ball Bearing Ring 16.00 48 20112 Secondary Pipe 26.00 14b 30752 Grub Screw 1.00 48a 30734 ORing D.00 17,6 X 10 X 3,8 1.00 15 30753 Propeller 23.60 50 30770 Secondary Nozzle 19.80 15a 30831 Endless Screw 35.00 51 30771 Ferrule 14.50 16 30628 Endless Screw 35.00 52 30578 Screw 1.60 16a 30187 Grub Screw 1.60 53 30772 Washer 1.00 017 10293 Bearing House 26.30 54 30773 Washer 2.50 18 30190 Blind Bearing 12.60 55 30774 Inversion Ring 22.10 19 3010533 Crown 56 30837 Lever Protection 17.33 019 10501 Complete Pinion 56a 30838 Sime Part 1.58 19a 30833 Crown 20.60 56b 30839 Nut M4 1.00 20 30755 Gearbox Pinion 11.50 57 30511 Nut 1.60 20a 30193 Pin For Pinion 1.00 058 10191S Central Shaft 27.80 Gun Stands/Sprinklers 022 10255 Planetary Slow 30.30 059 10366 Inversion Fork 38.10 022a 10256 Pad 22.05 59a 30778 Pin For Fork 1.60 23 30758 Slow Speed Gear 4.00 60 30779 Spring House 8.70 23a 30835 High Speed Gear 8.00 61 301093 Inversion Spring 4.00 24 30836 High Speed Pinion 19.70 062 10295 Complete Inversion Lever Clamp 34.80 28 30613 ORing 2237 2.50 62a 30782 Pin For Vice 4.00 29 30678 ORing 121 1.00 63 30783 Screw 1.00 30 30227 Cam 3.20 64a 30785 Spring For Bolt 1.60 31 30228 Elastic Pin 0.40 65 30786 Bearing 3.10 32 20107 Shafting Bar 12.00 66 30677 DuBearing For Gearbox 8.00 33 20162 Shafting Bar Cover 9.30 67 30189 Du Bearing 10.50 34 30185 Cap 7.88 68 30233 Grease Nipple 0.90 35 30216 Grub Screw 1.00 75 30959 Washer D.00 5 1.60 36 3056610 Nozzle, Standard 25, 10mm (.0040 ) 11.50 76 3010378 Seeger 8.30 36 3056612 Nozzle, Standard 25, 12mm (.0047 ) 11.50 77 3010379 Spring 2.50 36 3056614 Nozzle, Standard 25, 14mm (.0055 ) 11.50 78 3010380 Spacer 2.80 36 3056616 Nozzle, Standard 25, 16mm (.0063 ) 11.50 078 10451 Complete Release 36 3056618 Nozzle, Standard 25, 18mm (.0071 ) 11.50 79 3010381 Shafting Bar 4.10 36 3056620 Nozzle, Standard 25, 20mm (.0078 ) 11.50 79a 3010382 Washer 2.50 36 3056622 Nozzle, Standard 25, 22mm (.0086 ) 11.50 80 3010383 Prisoner 6.50

Page 74 Mercury Gear Drive Sprinklers Mercury (P202) Mercury w/nozzle part 70304 15.1 670.00 Mercury 202 28 Degree Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 29 120 23 0.4 10 37 132 26 44 136 28 *w/ FPT base Included 3 nozzles. 146' 280' Diameter 0.47 12 0.55 14 0.63 16 0.71 18 0.78 20 0.86 22 56 150 33 29 144 42 44 164 51 56 184 59 70 202 66 29 156 51 44 176 66 56 196 76 70 216 86 29 170 68 44 190 83 56 208 96 70 228 107 44 184 105 56 200 119 70 216 130 85 250 170 44 208 142 56 228 165 70 250 180 85 276 203 44 220 161 56 238 186 70 262 209 85 280 228 Pos. 045 Part #10365 0.94 24 44 248 167 56 262 193 70 282 215 Deduct 2% for 25 deg and 5% for 22 deg nozzles. Pos. 021 Part #10147 Pos. 044 Part #10061

Page 75 Mercury Gear Drive Sprinklers Mercury Pos # Part # Pos # Part # 1 30681 Sprinkler Body 262.50 36i 301035410 Nozzle, Flip 22 /28, 10mm (.40 ) 12.70 02 10474S Crown Body 36i 301035412 Nozzle, Flip 22 /28, 12mm (.47 ) 12.70 2a 30683 Toothed Ring 85.00 36i 301035414 Nozzle, Flip 22 /28, 14mm (.55 ) 12.70 2c 30221 Crown Screws 6x12 0.80 36i 301035416 Nozzle, Flip 22 /28, 16mm (.63 ) 12.70 3 30684 Body Support 78.80 36i 301035418 Nozzle, Flip 22 /28, 18mm (.71 ) 12.70 4 30685 UPacking 9.00 36i 301035420 Nozzle, Flip 22 /28, 20mm (.78 ) 12.70 5 30686 Ball Bearing Ring 26.00 36i 301035422 Nozzle, Flip 22 /28, 22mm (.86 ) 12.70 6 30077 Sphere 1.00 36i 301035424 Nozzle, Flip 22 /28, 24mm (.94 ) 12.70 7 30687 Fastener Ring 7.10 36a 30567 Packing For Nozzle 1.60 8 30688 UPacking Ring 22.30 36b 3010449 Nozzle 8a 30689 External ORing 3.10 037 10411 Gearbox Support 30.60 8b 30690 Internal ORing 2.60 38 30106 Gearbox Shaft 17.50 9 30691 Endless Screw Body 61.30 038 10458 Pin Head 9a 30080 Washer 2.00 38a 30196 Elastic Pin 1.00 010 10397 Threaded Bearing 17.00 39 30198 Ball Bearing 20.20 010a 10395 Internal Bearing 11.00 40 30677 DuBearing For Gearbox 8.00 11 30693 Pipe Head 76.50 41 30207 Cover 6.90 12 20098 Principal Pipe 83.10 41a 30108 Plug 4.00 012 10377S Complete Principal Pipe 196.90 42 30109 Gearbox Gear 16.00 12a 30527 Ferrule For Pipe 29.70 43 30160 Grub Screw 1.60 13 30208 Elastic Pin 1.00 44 30169 Gearbox 40.30 15 30588 ORing 3.20 044 10061 Complete Gearbox 319.30 17 30087 Secondary Nozzle 6.50 044am 10168 America Head 322.88 18 30211 Nozzle Lock Ring 7.10 45 30192 Gearbox Pinion 11.20 19 20096 Jet Breaker Bar 43.70 045 10365S Complete Pinion 35.00 021 10147 Stream Breaker Lever 56.90 45a 30193 Pin For Pinion 1.00 21a 30091 Screw 1.00 46 30182 Pinion Bearing 4.80 22 30871 Camme 11.10 47 30191 Toothed Wheel 22.90 23 30093 Screw For Lever 9.50 048 10378 Cover w/ Bearing 11.40 24 30094 Nut For Lever 4.80 049 10293 Bearing House 26.30 26 30229 Screw 2.40 49a 30189 Du Bearing 10.50 26a 30232 Nut 0.40 50 30112 Propeller 26.30 Gun Stands/Sprinklers 27 30230 Washer 0.40 51 30190 Blind Bearing 12.60 28 20097 Shafting Bar 8.90 52 30628 Endless Screw 35.00 29 20144 Shafting Bar Cover 8.90 53 30201 Spring House 5.10 30 30697 Spring For Lever 6.50 54 30199 Screw 0.80 31 30098 Lateral Bevel Pinion 33.50 54a 30200 Nut 0.40 32 30099 Central Bevel Pinion 26.30 55 30113 Inversion Spring 2.00 033 10083S Shaft 24.10 56 30204 Cover 2.80 034 10401S Shaft Bearing 18 57 30184 Inversion Lever 9.50 34a 30223 Washer 1.60 58, 62 30118 Grub Screw 1.60 35 30102 Plug 6.20 59 30559 Screw 1.80 35a 30103 Washer 0.40 60 30699 Ring 5.20 36 3056610 Nozzle, Standard 25, 10mm (.40 ) 11.50 061 10087S Inversion Cotter Pin 10.90 36 3056612 Nozzle, Standard 25, 12mm (.47 ) 11.50 64 30219 Grub Screw 1.60 36 3056614 Nozzle, Standard 25, 14mm (.55 ) 11.50 65 30120 Inversion Lever Cover 6.50 36 3056616 Nozzle, Standard 25, 16mm (.63 ) 11.50 67 30220 Screw 1.00 36 3056618 Nozzle, Standard 25, 18mm (.71 ) 11.50 69 30233 Grease Nipple 0.90 36 3056620 Nozzle, Standard 25, 20mm (.78 ) 11.50 70 30231 Grease Nipple 1.80 36 3056622 Nozzle, Standard 25, 22mm (.86 ) 11.50 71 30187 Grub Screw 1.60 36 3056624 Nozzle, Standard 25, 24mm (.94 ) 11.50 76 30234 Grease Nipple 4.00

Page 76 Big River Gear Drive Sprinklers Big River (P250) *Companion flange included. Pos. 044 Part #10061 Big River IDROMECCANICA SRL Rev. 04 05/2013 72 & 116mm flange base (companion flange included.) 238' 354' Diameter Pos. 045 Part #10365 Big River w/nozzlegreen Pos. 049 Part #10293 85 338 307 CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODE N POSITION PRICE CODE N POSITION PRICE 100 346 CODE 330 N POSITION PRICE 30070 1 125.08 30181 20 1.59 3010450 36b 10077 02 62.12 10056 021 56 23.74 302 3010448 286 36i 10080 03 36.99 30091 21a 0.19 10411 037 70 320 319 30075 4 4.11 30092 22 3.58 30106 38 30076 5 11.45 1.1 30093 2823 85 3.82 340 30196 350 38a 30077 6 0.08 30094 24 2.01 10458 038 30078 7 2.46 30095 25 100 3.82 354 30198 378 39 30079 8 2.20 30096 25a 0.08 30677 40 30597 9 22.90 Deduct 30229 2% for 2625 deg and 5% 0.42 for 22 deg nozzles. 30207 41 30080 9a 0.40 30232 26a 0.13 30108 41a 10394 010 4.66 30230 27 Pos. 021 Part 0.11#10056 30109 42 10395 010a 3.18 20024 28 5.72 30110 43 30083 11 38.16 20025 29 4.20 30169 44 1 20022 12 38.80 30059 30 1.70 10061 044 1 30084 12a 15.69 30098 31 11.24 10168 044am 1 10376 012 85.44 30099 32 8.90 30192 45 30208 13 0.08 10083 033 7.84 30193 45a 20094 14 8.90 10401 034 7.00 10365 045 1 30085 15 0.83 30223 34a 0.23 30182 46 30086 16 0.08 30102 35 2.12 30191 47 30125 17 2.44 30103 35a 0.11 10378 048 30056 18 4.58 30063 36 2.82 10293 049 10090 019 23.43 30064 36aPos. 02 Part 0.38 #10077 30189 49a CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE 30070 1 125.08 30181 20 1.59 3010450 36b 7.80 30112 50 8.76 10077 02 62.12 10056 021 23.74 3010448 36i 2.52 30190 51 3.50 10080 03 36.99 30091 21a 0.19 10411 037 9.96 30628 52 11.55 30075 4 4.11 30092 22 3.58 30106 38 6.36 30201 53 1.91 30076 5 11.45 30093 23 3.82 30196 38a 0.13 30199 54 0.23 30077 6 0.08 30094 24 2.01 10458 038 6.68 30200 54a 0.08 30078 7 2.46 30095 25 3.82 30198 39 6.57 30113 55 0.61 30079 8 2.20 30096 25a 0.08 30677 40 2.08 30204 56 0.87 30597 9 22.90 30229 26 0.42 30207 41 2.33 30184 57 2.97 30080 9a 0.40 30232 26a 0.13 30108 41a 0.17 30114 58 0.23 10394 010 4.66 30230 27 0.11 30109 42 5.62 30115 59 0.68 10395 010a 3.18 20024 28 5.72 30110 43 0.23 30116 60 0.13 30083 11 38.16 20025 29 4.20 30169 44 13.36 10087 061 3.82 20022 12 38.80 30059 30 1.70 10061 044 104.73 30118 62 0.23 30084 12a 15.69 30098 31 11.24 10168 044am 154.76 30119 63 2.76 10376 012 85.44 30099 32 8.90 30192 45 4.24 30219 64 0.45 30208 13 0.08 10083 033 7.84 30193 45a 0.13 30120 65 1.59 20094 14 8.90 10401 034 7.00 10365 045 12.51 30220 67 0.11 30085 15 0.83 30223 34a 0.23 30182 46 0.85 30121 68 0.21 30086 16 0.08 30102 35 2.12 30191 47 6.78 30233 69 0.28 30125 17 2.44 30103 35a 0.11 10378 048 3.88 30231 70 0.55 30056 18 4.58 30063 36 2.82 10293 049 8.69 30187 71 0.23 10090 019 23.43 30064 36a 0.38 30189 49a 2.10 30233 76 0.28 Big River 250 28 Degree DISCONTINUED Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 0.71 18 0.78 20 0.86 22 0.94 24 1 26 44 196 119 56 214 139 70 230 124 85 250 170 44 238 137 56 264 159 70 282 178 85 300 194 56 268 186 66 282 197 70 294 208 85 314 228 56 282 217 66 294 230 70 308 243 85 328 266 56 294 250 70 314 380 1

Page 77 Big River Gear Drive Sprinklers Big River Pos # Part # Pos # Part # 1 30070 Sprinkler Body 382.70 36i 301044818 Nozzle, Flip 22 /28, 18mm (.71 ) 12.70 02 10077S Crown 192.50 36i 301044820 Nozzle, Flip 22 /28, 20mm (.78 ) 12.70 03 10080S Body Support 10080S 36i 301044822 Nozzle, Flip 22 /28, 22mm (.86 ) 12.70 4 30075 UPacking 90X76X8 13.60 36i 301044824 Nozzle, Flip 22 /28, 24mm (.94 ) 12.70 5 30076 Ball Bearing Ring 34.00 36i 301044826 Nozzle, Flip 22 /28 26mm (1 ) 12.70 6 30077 Sphere 1.00 36i 301044828 Nozzle, Flip 22 /28, 28mm (1.10 ) 12.70 7 30078 Fastener Ring D. 78 10.00 36i 301044830 Nozzle, Flip 22 /28 30mm (1.2 ) 12.70 8 30079 UPacking Ring 10.00 36a 30064 Packing For Nozzle 2.50 9 30597 Worm Carter 61.43 36b 3010450 Rubber Nozzle 9a 30080 Washer 2.00 037 10411 Gearbox Support 30.60 010 10395 Internal Bearing 11.00 38 30106 Gearbox Shaft 17.50 010 10394 Threaded Bearing 17.00 038 10458 Pin Head 11 30083 Pipe Head 119.90 38a 30196 Elastic Pin 1.00 12 20022 Principal Pipe 105.00 39 30198 Ball Bearing 20.20 012 10376 Complete Principal Pipe 258.10 40 30677 DuBearing For Gearbox 8.00 12a 30084 Ferrule For Pipe 44.90 41 30207 Cover 6.90 13 30208 Elastic Pin 1.00 41a 30108 Plug 4.00 14 20094 Secondary Pipe 28.40 42 30109 Gearbox Gear 16.00 15 30085 ORing For Pipe 3.50 43 30110 Grub Screw 1.60 16 30086 Elastic Pin 0.20 44 30169 Gearbox 40.30 17 30125 Secondary Nozzle 7.10 044 10061 Complete Gearbox 319.30 18 30056 Nozzle Lock Ring 31.50 044am 10168 America Head 322.88 019 10090S Jet Breaker Bar 65.00 45 30192 Gearbox Pinion 11.20 20 30181 Internal Body Bearing 5.60 045 10365S Complete Pinion 35.00 021 10056 Stream Breaker Lever 67.80 45a 30193 Pin For Pinion 1.00 21a 30091 Screw 1.00 46 30182 Pinion Bearing 4.80 22 30092 Camme 13.50 47 30191 Toothed Wheel 22.90 23 30093 Screw For Lever 9.50 048 10378 Cover w/ Bearing 11.40 24 30094 Nut For Lever 4.80 049 10293 Bearing House 26.30 25 30095 Lever Upper Screw 9.50 49a 30189 Du Bearing 10.50 25a 30096 Elastic Pin 0.50 50 30112 Propeller 26.30 26 30229 Screw 2.40 51 30190 Blind Bearing 12.60 26a 30232 Nut 0.40 52 30628 Endless Screw 35.00 Gun Stands/Sprinklers 27 30230 Washer 0.40 53 30201 Spring House 5.10 28 20024 Shafting Bar 14.50 54 30199 Screw 0.80 29 20025S Shafting Bar Cover 13.20 54a 30200 Nut 0.40 30 30059 Spring For Lever 6.50 55 30113 Inversion Spring 2.00 31 30098 Lateral Bevel Pinion 33.50 56 30204 Cover 2.80 32 30099 Central Bevel Pinion 26.30 57 30184 Inversion Lever 9.50 033 10083S Shaft 24.10 58 30114 Grub Screw 1.60 034 10401S Shaft Bearing 18 59 30115 Stud Bolt 3.20 34a 30223 Washer 1.60 60 30116 Nut M 10X6 1.00 35 30102 Plug 6.20 061 10087S Inversion Cotter Pin 10.90 35a 30103 Washer 0.40 62 30118 Grub Screw 1.60 36 3006318 Nozzle, Standard 25, 18mm (.71) 11.50 63 30119 Body Support Packing 7.90 36 3006320 Nozzle, Standard 25, 20mm (.78 ) 11.50 64 30219 Grub Screw 1.60 36 3006322 Nozzle, Standard 25, 22mm (.86 ) 11.50 65 30120 Inversion Lever Cover 6.50 36 3006324 Nozzle, Standard 25, 24mm (.94 ) 11.50 67 30220 Screw 1.00 36 3006326 Nozzle, Standard 25, 26mm (1 ) 11.50 68 30121 Nut M10X10 1.00 36 3006328 Nozzle, Standard 25, 28mm (1.10 ) 11.50 69, 76 30233 Grease Nipple 0.90 36 3006330 Nozzle, Standard 25, 30mm (1.2 ) 11.50 70 30231 Grease Nipple 1.80 71 30187 Grub Screw 1.60

Page 78 Mariner Gear Drive Sprinklers Mariner (P401) w/2 1/ FPT base Includes 3 nozzles. 274' 440' Diameter One Speed (Two speed also available.) Pos. 042 Part #10190 Mariner w/nozzlegreen high speed part 70306 25.3 1,075.00 COD. 10165 Mariner 401 28 Degree Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 1 26 1.1 28 1.2 30 44 274 173 56 308 211 70 336 244 85 354 273 44 294 242 56 320 280 70 340 313 85 362 343 56 382 319 70 354 356 85 374 390 100 398 421 56 340 359 70 368 402 1.25 32 COD. 10165 85 384 440 IDROMECCANICA SRL 1.35 34 Mariner IDROMECCANICA SRL Rev. 04 05/2013 COD. 10165 100 404 475 70 374 451 85 398 494 100 420 533 115 440 571 Deduct 2% for 25 deg and 5% for 22 deg nozzles. Mariner IDROMECCANICA SRL Rev. 04 05/2013 COD. 10165 Mariner IDROMECCANICA SRL Rev. 04 05/2013 Pos. 019 Part #10501 Pos. 02 Part #10148 Pos. 062 Part #10295 COD. 10323 Pos. 078 Part #10452 CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE 10403 01 140.34 10501 019 12.51 30949 47a 0.75 30724 72 0.21 10148 02 92.01 3010533 19 6.23 20136 48 10.60 30086 73a 0.08 10170 02am 92.01 30755 20 3.29 30734 48a 0.21 30102 74 2.12 Pos. 058 Part #10188 30737 2 13.14 30193 20a 0.13 30878 50 6.55 30103 74a 0.11 30738 3 6.57 10255 022 9.88 30771 51 3.75 30959 75 0.19 30862 4 31.14 30758 23 0.87 30578 52 0.32 30049 76 3.96 30863 5 30.49 30870 26 6.64 30557 53 0.21 3010358 77 0.57 30945 5a 0.49 30613 28 0.40 30511 53a 0.21 10452 078 8.48 3010385 5b 17.91 30678 29 0.15 30773 54 0.38 3010359 78 0.85 3010363 5c 26.71 30695 30 0.81 30879 55 8.27 3010360 79 1.25 30864 6 3.99 30208 31 0.08 30968 56 4.22 3010361 79a 0.21 30048 7 0.13 20142 32 2.86 30973 56a 0.32 3010362 82 2.08 30865 8 33.92 20145 33 2.59 CODICE 30839POSIZIONE 56b PREZZO 0.13 CODICE 3010767 POSIZIONE 100 PREZZO 1.55 CODICE POSI 30866 9 23.53 30185 34 6.30 CODE 10188 N POSITION 058 PRICE 9.33 CODE 3010768 N POSITION 101 PRICE 1.55 CODE N POS 10403 01 140.34 10501 019 12.51 30949 4 30108 9b 0.17 30947 35a 0.78 10148 30778 02 59a 92.01 0.23 3010533 3010233 80 19 17.17 6.23 20136 4 10394 010 4.66 30063 36 2.82 30779 60 2.54 3010335 81 2.97 10170 02am 92.01 30755 20 3.29 30734 4 10404 010a 2.84 30056 37 4.58 301093 61 0.87 Prices effective 10110 January 083 1, 7.842014 30737 2 13.14 30193 20a 0.13 30878 5 30080 10b 0.40 30064 38 0.38 10295 062 15.16 30447 86 48.97 COD. 10323 30114 10c 0.23 10189 039 23.43 30738 30782 3 62a 6.57 0.28 3010232 10255 87 022 49.089.88 30771 5 30748 11 0.74 30874 40 19.08 30862 30783 4 63 31.14 0.13 20185 30758 8823 7.310.87 30578 5 30868 13 13.99 3010444 41 1.57 30863 30785 5 64a 30.49 0.21 20259 30870 9026 4.456.64 30557 5 30160 9a 0.23 30946 35 0.98 10366 059 15.26 Mariner quadrato

Page 79 Mariner Gear Drive Sprinklers Mariner Pos # Part # Pos # Part # 01 10403S Sprinkler Body 437.40 43 30093 Screw For Lever 9.50 2 30737 Gearbox 40.30 44 30094 Nut For Lever 4.80 02 10148S Complete Gearbox 279.90 45 20127 Principal Pipe 98.40 02am 10170 Complete Head 285.08 46 30767 Screw 0.50 3 30738 Gearbox Cover 17.50 47 30877 Locking Ring For Pipe 38.60 4 30862 Body Support 102.80 47a 30949 ORing 3225 2.50 5 30863 Crown 118.50 48 20136 Tube 18.90 5a 30945 Screw 4.00 48a 30734 ORing D. 17,6 X 10 X 3,8 1.00 5b 3010385 Ring Body Support 52.00 50 30878 Secondary Nozzle 21.60 5c 3010363 Ring 80.10 51 30771 Ferrule 14.50 6 30864 UPacking Crown 13.20 52 30578 Screw 1.60 7 30048 Sphere 0.80 53 30557 Washer Grower D. 6 1.00 8 30865 Threaded Body Support 95.80 53a 30511 Nut 1.60 9 30866 Endless Screw 70.70 54 30773 Washer 2.50 9a 30160 Grub Screw 1.60 55 30879 Inversion Ring 23.30 9b 30108 Plug 4.00 56 30968 Cover For Lever 19.00 010 10394 Threaded Bearing 17.00 56a 30973 Screw 4X30 1.00 010a 10404S Internal Bearing 10.00 56b 30839 Nut M4 1.00 10b 30080 Washer 2.00 058 10188 Central Shaft 40.00 10c 30114 Grub Screw 1.60 059 10366 Inversion Fork 38.10 11 30748 Pinion Bearing 4.80 59a 30778 Pin For Fork 1.60 13 30868 Threaded Ring For Crown 40.30 60 30779 Spring House 8.70 13a 301014 Screw 1.60 61 301093 Inversion Spring 4.00 14 30869 Ball Bearing Ring 43.70 062 10295 Complete Inversion Lever Clamp 34.80 15 30753 Propeller 23.60 62a 30782 Pin For Vice 4.00 16 30628 Endless Screw 35.00 63 30783 Screw 1.00 16a 30187 Grub Screw 1.60 64a 30785 Spring For Bolt 1.60 017 10293 Bearing House 26.30 65 30880 Inversion Lever Bearing 3.50 18 30190 Blind Bearing 12.60 66 30677 DuBearing For Gearbox 8.00 19 3010533 Crown 67 30189 Du Bearing 10.50 019 10501 Complete Pinion 68 30233 Grease Nipple 0.90 20 30755 Gearbox Pinion 11.50 69 30881 Support 78.75 20a 30193 Pin For Pinion 1.00 70 30426 Screw 8X25 10.50 022 10255 Planetary Slow 30.30 71 30475 Nut 8X6 1.00 23 30758 Slow Speed Gear 4.00 72 30724 Grub Screw 1.20 26 30870 ORing 21.90 73a 30086 Elastic Pin 0.20 28 30613 ORing 2237 2.50 74 30102 Plug 6.20 29 30678 ORing 121 1.00 74a 30103 Washer 0.40 30 30695 Cam 11.50 75 30959 Washer D. 5 1.60 31 30208 Elastic Pin 1.00 76 30049 Fastener Ring 13.10 32 20142 Shafting Bar 12.00 77 3010358 Spring 2.40 33 20145 Principal Pipe 12.00 78 3010359 Spacer 3.20 34 30185 Cap 7.88 078 10452S Full Release 35 30946 ORing 3300 5.60 79 3010360 Shafting Bar 4.10 35a 30947 ORing 3262 4.80 79a 3010361 Washer 1.60 36 3006326 Nozzle, Standard 25, 26mm (1 ) 11.50 80 3010233 Area 36 3006328 Nozzle, Standard 25, 28mm (1.10 ) 11.50 81 3010335 Bracket 36 3006330 Nozzle, Standard 25, 30mm (1.2 ) 11.50 82 3010362 Prisoner 6.90 36 3006332 Nozzle, Standard 25, 32mm (1.25 ) 11.50 083 10110 Nut 36 3006334 Nozzle, Standard 25, 34mm (1.35 ) 11.50 86 30447 Ring 37 30056 Nozzle Lock Ring 31.50 87 3010232 Lever Gun Stands/Sprinklers 38 30064 Packing For Nozzle 2.50 88 20185 Pin 039 10189S JetBreaker 61.30 90 20259S Roll 40 30874 PipeHead 63.00 93 30902 Lever 41 3010444 Jet Breaker Spring Lever 9.50 95 30513 Screw 042 10190 JetBreaker Lever 54.70 96 30904 Nut 42a, 94 30091 Screw 1.00 100 3010767 Bearing For Jet Breaker 101 3010768 Bearing With Head for Jet Breaker

Page 80 Polaris Gear Drive Sprinklers Polaris (P400) Polaris IDROMECCANICA SRL Rev. 00 06/2012 90 & 150mm flange connection (companion flange included) 302' 418' Diameter Polaris Polaris 200 28 Degree Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 1 26 1.1 28 1.2 30 1.25 32 1.35 34 DISCONTINUED 56 302 263 70 230 295 85 340 323 100 362 348 56 314 300 70 328 324 85 354 366 100 380 395 56 320 338 70 340 378 85 368 414 100 384 446 70 362 423 85 380 464 100 394 500 115 404 536 70 374 472 85 394 517 100 404 558 115 418 598 Deduct 2% for 25 deg and 5% for 22 deg nozzles. Pos. 045 Part #10365 Pos. 021 Part #10058 CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODICE POSIZIONE PREZZO CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE CODE N POSITION PRICE 30041 Pos. 044 1 Part #10060 169.60 30057 20 1.70 10411 037 9.96 30628 52 11.55 10076 02 72.08 10058 021 23.74 30106 38 6.36 30201 53 1.91 10079 03 44.52 30091 21a 0.19 30196 38a 0.13 30199 54 0.23 30046 4 4.90 30092 22 3.58 10458 038 6.68 30200 54a 0.08 30047 5 13.46 30093 23 3.82 30198 39 6.57 30066 55 0.63 30048 6 0.13 30094 24 2.01 30677 40 2.08 30204 56 0.87 30049 7 3.96 30095 25 3.82 30207 41 2.33 30184 57 2.97 30050 8 2.46 30096 25a 0.08 30108 41a 0.17 30118 58 0.23 30596 9 25.65 30229 26 0.42 30109 42 5.62 30115 59 0.68 30080 9a 0.40 30232 26a 0.13 30160 43 0.23 30116 60 0.13 10394 010 4.66 30230 27 0.11 30169 44 13.36 10087 061 3.82 10396 010a 4.13 20016 28 6.57 10060 044 104.73 30118 62 0.23 30052 11 43.67 20017 29 5.09 10167 044am 154.76 30068 63 3.18 20013 12 43.25 30059 30 1.70 30192 45 4.24 30219 64 0.45 30053 12a 19.72 30060 31 13.14 30193 45a 0.13 30069 65 2.31 10375 012 93.60 30061 32 9.86 10365 045 12.51 30220 67 0.11 30208 13 0.08 10082 033 9.12 30182 46 0.85 30121 68 0.21 20014 14 11.24 10399 034 7.63 30191 47 6.78 30233 69 0.28 30054 15 1.87 30223 34a 0.23 10378 048 3.88 30231 70 0.55 30208 16 0.08 30102 35 2.12 10293 049 8.69 30187 71 0.23 30125 17 2.44 30103 35a 0.11 30189 49a 2.10 30056 18 4.58 30063 36 2.82 30112 50 8.76 10089 019 29.89 30064 36a 0.38 30190 51 3.50 Pos. 02 Part #10076 1

Page 81 Polaris Gear Drive Sprinklers Polaris Pos # Part # Pos # Part # 1 30041S Carter 280.00 36 3006332 Nozzle, Standard 25, 32mm (1.25 ) 11.50 02 10076 Crown 223.00 36 3006334 Nozzle, Standard 25, 34mm (1.35 ) 11.50 03 10079 Body Support 135.60 36a 30064 Packing For Nozzle 2.50 4 30046 UPacking 117X98X11 16.20 037 10411 Gearbox Support 30.60 5 30047 Ball Bearing Ring 39.30 38 30106 Gearbox Shaft 17.50 6 30048 Sphere 0.80 038 10458 Pin Head 7 30049 Fastener Ring 13.10 38a 30196 Elastic Pin 1.00 8 30050 UPacking Ring 8.10 39 30198 Ball Bearing 20.20 9 30596 Endless Screw Body 80.00 40 30677 DuBearing For Gearbox 8.00 9a 30080 Washer 2.00 41 30207 Cover 6.90 010 10394 Threaded Bearing 17.00 41a 30108 Plug 4.00 010a 10396 Internal Bearing 15.00 42 30109 Gearbox Gear 16.00 11 30052 Pipe Head 140.00 43 30160 Grub Screw 1.60 12 20013 Principal Pipe 131.20 44 30169 Gearbox 40.30 012 10375S Complete Principal Pipe 288.70 044 10060 Complete Gearbox 319.30 12a 30053 Threaded Ring For Pipe 59.10 044am 10167 Gear 13, 16 30208 Elastic Pin 1.00 45 30192 Gearbox Pinion 11.20 14 20014 Secondary Pipe 35.00 045 10365S Complete Pinion 35.00 15 30054 ORing 7.10 45a 30193 Pin For Pinion 1.00 17 30125 Secondary Nozzle 7.10 46 30182 Pinion Bearing 4.80 18 30056 Nozzle Lock Ring 31.50 47 30191 Toothed Wheel 22.90 019 10089S Jet Breaker Bar 85.30 048 10378 Cover w/ Bearing 11.40 20 30057 Stream Breaker Bearing 4.40 049 10293 Bearing House 26.30 021 10058 Stream Breaker Lever 67.80 49a 30189 Du Bearing 10.50 21a 30091 Screw 1.00 50 30112 Propeller 26.30 22 30092 Camme 13.50 51 30190 Blind Bearing 12.60 23 30093 Screw For Lever 9.50 52 30628 Endless Screw 35.00 24 30094 Nut For Lever 4.80 53 30201 Spring House 5.10 25 30095 Lever Upper Screw 9.50 54 30199 Screw 0.80 25a 30096 Elastic Pin 0.50 54a 30200 Nut 0.40 26 30229 Screw 2.40 55 30066 Inversion Spring 2.10 26a 30232 Nut 0.40 56 30204 Cover 2.80 27 30230 Washer 0.40 57 30184 Inversion Lever 9.50 28 20016 Shafting Bar 15.70 58, 62 30118 Grub Screw 1.60 29 20017 Shafting Bar Cover 16.20 59 30115 Stud Bolt 3.20 30 30059 Spring For Lever 6.50 60 30116 Nut M 10X6 1.00 31 30060 Lateral Bevel Pinion 39.80 061 10087S Inversion Cotter Pin 10.90 32 30061 Central Bevel Pinion 29.10 63 30068 Body Support Packing 13.00 033 10082 Shaft 28.00 64 30219 Grub Screw 1.60 034 10399 Shaft Bearing 21.90 65 30069 Inversion Lever Cover 7.60 34a 30223 Washer 1.60 67 30220 Screw 1.00 35 30102 Plug 6.20 68 30121 Nut M10X10 1.00 35a 30103 Washer 0.40 69 30233 Grease Nipple 0.90 36 3006326 Nozzle, Standard 25, 26mm (1 ) 11.50 70 30231 Grease Nipple 1.80 36 3006328 Nozzle, Standard 25, 28mm (1.10 ) 11.50 71 30187 Grub Screw 1.60 36 3006330 Nozzle, Standard 25, 30mm (1.2 ) 11.50 Gun Stands/Sprinklers

Page 82 Gemini Gear Drive Sprinklers Gemini (p600 / p1200) 100 x 142mm flange connection (companion flange included) Includes 3 nozzles. 368' 510' Diameter Pos. 02a Part #10490 Gemini (2 speed high or low switch) part 70307 34.7 1,365.00 Pos. 01 Part #10578 Gemini 1200 28 Degree Nozzle Diameter Pressure Diameter Discharge Inch MM PSI Feet GPM 1.2 30 1.25 32 1.35 34 1.42 36 1.5 38 1.57 40 1.65 42 1.72 44 56 328 319 70 354 356 85 374 390 100 398 421 70 368 424 85 84 464 100 404 500 115 426 536 70 380 472 85 398 518 100 420 558 115 440 598 70 398 525 85 420 574 100 440 620 115 458 664 85 434 635 100 458 685 115 472 733 128 492 777 85 446 698 100 472 753 115 488 806 128 510 855 88 460 717 95 480 761 100 500 783 110 524 809 88 470 700 95 480 730 100 490 750 110 500 810 95 484 855 1.8 46 100 494 875 Pos. 01 Part #10578 110 504 905 88 480 910 1.87 48 1.95 50 88 474 825 95 490 940 100 500 960 110 510 995 88 500 925 95 520 955 100 540 1075 110 570 1110 Deduct 2% for 25 deg and 5% for 22 deg nozzles. Pos. 020b Part #10500 Pos. 042 Part #10190 Pos. 079 Part #10454 Pos. 0100 Part #10539 Pos. 062 Part #10291

Page 83 Gemini Gear Drive Sprinklers Gemini Pos # Part # Pos # Part # 1 3010760 Carter 37 30056 Nozzle Lock Ring 31.50 01 10578 Body 38 30064 Packing For Nozzle 2.50 2a 3010633 Head 039 10288S JetBreaker 139.50 02a 10490 Complete Head 40 301068 PipeHead 83.10 3 301041 Gearbox Cover 23.00 41 3010444 Jet Breaker Spring Lever 9.50 3a 301042 Cover 26.30 042 10190 JetBreaker Lever 54.70 4 3010761 Ring 42a 30091 Screw 1.00 04 10390 Body Support 215.60 43 30093 Screw For Lever 9.50 5 301045 Crown 301.80 44 30094 Nut For Lever 4.80 5a 301046 Stud Bolt 9.50 45 20158 Tube 70.88 5b 3010365 Ring 65.60 47 30053 Threaded Ring For Pipe 59.10 5c 3010366 Ring 63.00 47a 30054 ORing 7.10 6 20267 Body 48 20159 Secondary Pipe 32.30 6old 301047 UPacking Crown 18.50 48a 301069 ORing 1.60 7 30048 Sphere 0.80 49 30116 Nut M 10X6 1.00 8 301083 Screw 6X15 T.E. 1.60 50 301070 Secondary Nozzle 27.00 8a 301084 Screw 6X15 T.C.E.I. 1.60 51 301071 Ferrule 16.00 9 301048 Endless Screw 98.00 52 30500 Screw 6X25 0.90 9a 30160 Grub Screw 1.60 53 30557 Washer Grower D. 6 1.00 9b 30108 Plug 4.00 53a 30511 Nut 1.60 010 10394 Threaded Bearing 17.00 54 30773 Washer 2.50 010a 10404S Internal Bearing 10.00 55 301072 Inversion Ring 31.00 10b 30080 Washer 2.00 56 301073 Lever Protection 17.33 10c 30118 Grub Screw 1.60 56a 301074 Sime Part 0.80 11 30748 Pinion Bearing 4.80 56b 30839 Nut M4 1.00 12 301050 Gearbox Central Body 76.60 058 10188 Central Shaft 40.00 13 3010762 Ring 059 10290 Inversion Fork 41.60 13a 301014 Screw 1.60 59a 301077 Pin For Fork 1.60 13old 301052 Threaded Ring For Crown 72.80 60 301078 Spring House 16.00 14 301035 Spacer 61 301079 Inversion Spring 4.20 14a 3010763 Cover 062 10291 Vice For Inversion Lever 48.10 14old 301053 Ball Bearing Ring 93.40 62a 30782 Pin For Vice 4.00 15 301054 Propeller 28.40 63 30783 Screw 1.00 015br 10457 Propeller 64 3010181 Gearbox Support 5.60 16 3010636 Screw 64a 30785 Spring For Bolt 1.60 16a 30187 Grub Screw 1.60 66 30677 DuBearing For Gearbox 8.00 017 10293 Bearing House 26.30 67 30189 Du Bearing 10.50 17a 301055 Lever 15.00 68 30233 Grease Nipple 0.90 17br 3010534 Bushing 69 3010646 Support 18 30031S Compass 7.50 69a 3010647 Clamp 018a 10294 Bush 47.50 70old 30521 Screw 1.80 19 30833 Crown 20.60 71 3010648 Square Nuts 19a 30817 Spring 3.20 71old 30475 Nut 8X6 1.00 20 30836 High Speed Pinion 19.70 72 30724 Grub Screw 1.20 020b 10500 Pin 73 30057 Stream Breaker Bearing 4.40 20b 3010634 Pinion Pivot 74 30102 Plug 6.20 21a 301058 Pin 1.50 74a 30103 Washer 0.40 022 10285 Planetary 30.20 75 30121 Nut M10X10 1.00 022a 10286 Second Planetary 106.10 076 10292 Levers Support 76.60 Gun Stands/Sprinklers 23 30835 High Speed Gear 8.00 77 3010367 Seeger 15.10 23a 301060 Stud Bolt 4.90 78old 301016 Spring 2.50 024 10287S Pinion 56.00 79old 3010368 Spacer 3.20 24a, 70 30965 Screw 6X30 3.20 079old 10454 Disengagement 25a, 86 30270 Nut 1.00 80 3010369 Shafting Bar 4.40 26 301063 ORing 53.00 81 3010370 Washer 1.60 28 30613 ORing 2237 2.50 82 3010855 Prisoner 28a 301064 ORing 123 1.00 82old 3010371 Prisoner 57.50 29 30678 ORing 121 1.00 83 3010374 Flange 306.20 29a 30532 Washer Inox 1.00 84 3010372 Gasket 9.50 30 30695 Cam 11.50 85 3010772 Gasket 31, 73a 30208 Elastic Pin 1.00 85old 3010373 Gasket 9.50 32 20161 Shafting Bar 9.60 87 3010375 Screw 10X35 1.70 33 20156 Shafting Bar Cover 9.60 89 3010764 ORing 34 30185 Cap 7.88 89br 3010492 Bearing Cap 35 301066 ORing 8.00 90 3010765 ORing 35a 301067 ORing 7.10 92 3010640 Ring 36 3006330 Nozzle, Standard 25, 30mm (1.2 ) 11.50 93 30040S Grub Screwing 3.15 36 3006332 Nozzle, Standard 25, 32mm (1.25 ) 11.50 95 30030S Ring 12.00 36 3006334 Nozzle, Standard 25, 34mm (1.35 ) 11.50 96 3010613 Bearing 36 3006336 Nozzle, Standard 25, 36mm (1.42 ) 11.50 97 30028S Bearing 24.50 36 3006338 Nozzle, Standard 25, 38mm (1.50 ) 11.50 98 3010653 Knob 36 3006340 Nozzle, Standard 25, 40mm (1.57 ) 11.50 98old, 103 3010570 ORing 36 3006342 Nozzle, Standard 25, 42mm (1.65 ) 11.50 99 3010654 Nut 36 3006344 Nozzle, Standard 25, 44mm (1.72 ) 11.50 0100 10539 Release 36 3006346 Nozzle, Standard 25, 46mm (1.80 ) 11.50 101 3010428 Screw 36 3006348 Nozzle, Standard 25, 48mm (1.87 ) 11.50 102 3010429 Nut 36 3006350 Nozzle, Standard 25, 50mm (1.95 ) 11.50

Page 84 Schumacher Irrigation is your source for hard to find irrigation parts, and custom built irrigation fittings.

Page 85 Fittings Section Five Couplers & Accessories Ball & Socket Fittings CamLoc Fittings Elbows End Tees Line Tees & Y Tees Reducers & Increasers End Plugs & End Caps Hooks & Bands Latch Accessories Rings & Accessories Flanges & Disks Cones Telescopes & Drop Pipe Valves & Valve Parts Meters Pivot Parts Nipples, Couplings & Tees Drip s Filters Gaskets Fittings

Page 86 Ball & Socket Couplers (Bauer Style)

Page 87 Couplers/Male Ends Coupler (Black Steel) Coupler (Stainless Steel) Standard Depth 65/ 7" 85/ 12 Gauge (SQ Back) Deep Punch Extra Deep Punch ExtraExtra Deep Punch Stainless Steel 23/ Depth 41/ Depth Depth Depth Depth Depth Depth 57/ Depth 51/ Depth Depth Depth Depth 41/ Depth Depth 81/ Depth 11" Depth 7" Depth 60120 60121 60122 60123 60124 60128 60118 60125 60129 60126 60127 68030 95198 95199 95201 95010 95011 95012 95013 95007 95008 95009 95202 95203 95200 97518 97519 97520 97521 1 1 1.5 2 2.8 3.8 3.5 4.5 6 5.5 9 3 10.00 11.00 15.00 15.50 17.00 29.00 22.00 22.00 47.00 33.00 49.00 24.00 14.00 17.50 21.00 26.00 34.00 44.00 43.00 18.00 20.00 23.00 43.00 56.00 30.00 170.00 179.00 185.00 217.00 Coupler10ga. (Black or galv. Steel) Black 10 ga. Black 10 ga. Black 10 ga. Black 10 ga. Black 10 ga. 97548 69662 69663 95305 97549 4.5 5.9 7.2 17.50 25.00 31.00 39.00 58.00 10 Gauge Gal w / welding strip 10 ga. Gal w / welding strip 10 ga. 69664 69665 4.5 5.9 29.00 35.00 Male RL End (Black Steel) Male RL End (Stainless Steel) 7" 12 Gauge with wider ring Stainless Steel 60169 60170 60171 60172 60176 60173 60174 60175 68112 97522 97523 97524 97525 1.2 1.5 2 2.8 3.5 4.5 5.5 9 3 11.00 13.00 15.00 17.00 23.00 23.00 33.00 49.00 14.50 170.00 179.00 185.00 217.00 Fittings Male rl End10ga. (Black or galv. Steel) 10 Gauge Black 10 ga. Black 10 ga. Black 10 ga. Black 10 ga. Gal w / welding strip 10 ga. Gal w / welding strip 10 ga. 69764 69765 95306 97662 69766 69767 4.2 5.9 6.7 4.2 5.9 25.00 27.00 39.00 55.00 28.00 33.00

Page 88 Couplers Coupler (Cast Aluminum) *Hook pocket on all sizes, 68 also take RLC * & Lindsay require oversize RLC *& take standard RLC, requires oversized RLC 7" 60114 60110 60115 60111 60109 60112 60113 1.3 1.5 1.8 2.0 2.5 2.8 3.3 20.00 23.00 28.00 35.00 35.00 45.00 56.00 RL Coupler Set Schumacher (Cast aluminum) Set Set Set Set 7" Set Set Set 60145 60146 60130 60134 60131 60132 60133 4.4 5.0 5.3 6.3 7.0 8.1 10.0 55.00 67.00 71.00 88.00 87.00 108.00 161.00 Female HT, Female HT, Female HT, Female HT, 7" Female HT, Female HT, Female HT, 60147 60148 60150 60153 60151 60152 40015 1.5 1.8 2.4 2.5 2.8 3.5 5.5 22.00 29.00 31.00 39.00 39.00 49.00 76.00 Set Includes Standard Ringlock Clamp Male HT, Male HT, Male HT, Male HT, 7" Male HT, Male HT, Male HT, 60149 60154 60160 60163 60161 60162 40016 1.2 1.4 1.8 1.9 2 2.3 3.5 16.00 20.00 22.00 26.00 28.00 34.00 55.00 RL Coupler Set A&M (Cast aluminum) Set RL, Set RL, Set RL, 60080 60081 60082 5.3 7 8.1 79.00 93.00 110.00 Female RL, Female RL, Female RL, 60089 60090 60091 2.4 2.8 3.5 35.00.00 41.00 55.00 Set Includes A&M Ringlock Clamp Male RL, Male RL, Male RL, 60086 60087 60088 1.8 2.0 2.3 22.00 28.00 28.00 Presson RL Coupler/ Male End (Galvanized steel) Male Male Male Male 7" Male Male Male Male 60201 60202 60203 60210 60204 60211 60212 60205 2.0 2.5 3.5 4.0 5.0 7.0 11.0 14.0 16.00 18.00 21.00 23.00 30.00 32.00 41.00 53.00 Female Female Female Female 7" Female Female Female Female 60223 60224 60225 60220 60226 60221 60222 60227 2.0 2.5 3.5 4.0 5.5 8.0 10.5 15.0 18.00 19.00 24.00 26.00 34.00 34.00 50.00 68.00

Page 89 Couplers Hold Band (Steel) 60235 60236 60237 60230 60231 60232 0.3 0.3 0.4 0.5 0.8 0.9 2.50 3.00 4.00 6.00 9.00 12.00 Lateral Coupler (Cast Aluminum) Presson Presson Presson 60241 60242 60240 1.3 1.6 2.0 29.00 31.00 40.00 Weldon Weldon Weldon 60260 60261 60262 1.2 1.6 2.0 17.00 28.00 36.00 All couplers have 1" outlet. Knob Style Coupler (Presson)(Cast Aluminum) Lateral Presson* Lateral Weldon* Lateral Weldon* 60263 60264 60265 1.0 1.2 1.8 30.00 29.00 35.00 Mainline Weldon Mainline Weldon 60266 60267 3.2 3.9 41.00 51.00, *Lateral couplers have 1" outlet., Coupler/male ends ABC (Galvanized steel) for prices on ABC Fittings. Female w/1" outlet: Presson Includes Spring & Gasket Female Presson: Includes Spring & Gasket Male Presson: 60180 60181 60182 60183 60184 60185 60186 60187 60188 60189 60190 60191 60192 60193 60194 1.5 3.3 5.5 0.3 2.0 4.0 7.3 9.5 15.5 0.5 1.3 2.0 4.8 6.3 13.0 31.00 51.00 72.00 23.00 40.00 58.00 71.00 98.00 158.00 20.00 27.00 32.00 56.00 70.00 130.00 Fittings Lateral Coupler Set Bolton (Cast aluminum) 60300 60301 60302 60303 60304 1.9 2.8 3.7 4.8 6.3 38.00 49.00 60.00 80.00 95.00 Has 1" Female threaded outlet. Includes band and hook.

Page 90 Couplers Twist Lock ends (Cast aluminum) Female: 60141 60142 60143 60144 2.3 3.3 2.8 7.0 43.00 45.00 47.00 90.00 Male: 60136 60137 60138 60139 0.5 0.9 1.0 2.3 16.50 20.00 25.00 32.00 Full Male End: 60135 2.8 47.00 *200lbs. max. pressure on all sizes except. Detachable Coupler Set (Cast Aluminum) 60095 60096 60097 60098 60099 3.0 4.3 5.2 7.6 8.8 45.00 58.00 61.00 85.00 102.00 Includes " band and hook assemblies Detachable Couplerknob (Cast Aluminum) 7" 69512 69513 69514 69515 69516 69517 1.5 1.9 2.3 3.5 4.1 5.8 34.00 45.00 55.00 70.00 93.00 101.00 Spike Coupler (PVCSolvent) 21/ 60305 60306 1.5 2.0 16.00 20.00 3/ riser outlet Ideal for row crops, nurseries, or orchards Spike riser locks male & female coupler halves and stabilizes the riser in a vertical position Substantial savings over aluminum or buried solid set systems Improved weatherability PVC compounds Highest UV inhibitors. Highest impact resistance. Easy off season storage, simply remove spike riser. Noncorrosive aluminum tubing spike riser Quad seal prevents water leakage around spike. Slotted male end allows for up to 11/ expansion and contraction of PVC pipe. Chevron seal gasket.

Page 91 Couplers & Accessories Bolton Center Riser (Steel galvanized) 60255 60256 3 4 14.00 15.00 Has 1" Female threaded outlet. Industrial groove end *Galvanized Steel and Aluminum Groove Fittings Available. Please Inquire. Steel 21/ Alum 69721 69722 69723 69724 69725 69726 69727 69728 69729 69730 69731 69732 69733 69734 69735 0.8 1.5 1.0 1.8 2.3 2.8 4.3 6.5 8.5 0.7 1.1 1.9 2.1 2.4 17.00 24.00 12.00 16.00 23.00 24.00 37.00 52.00 72.00 17.00 18.00 34.00 38.00 49.00 79.00 Industrial groove clamp *Includes Gasket Industrial groove Gasket 11/ 21/ 96776 69736 69737 69738 69739 69740 69741 69742 69743 69744 2.1 2.7 2.5 3.5 10.6 6.7 12.5 31.0 35.0 8.00 8.00 10.00 12.00 16.00 21.00 25.00 39.00 99.00 115.00 Fittings *CutAway View 11/ 21/ 96777 96767 96768 96769 96770 96771 96772 96773 96774 96775 10.80 3.40 14.20 4.10 4.60 8.00 5.80 15.00 23.00 26.00

Page 92 Couplings & Accessories Saddle Coupling (Cast aluminum) 3/ 1" 60100 40011 0.2 0.2 5.50 6.30 *Weldon Quick Coupling Riser Valve (Cast aluminum) 3/ fpt x 3/ 1"mpt x 3/ 1"mpt x 1" 61579 61590 61591 0.7 0.7 0.8 17.50 17.50 18.50 3/ Top outlet require 1.0ODx.11wall SCH40 pipe; 1" require 1.31ODx.13wall Sprinkler Deflector (Steel) Bolts to riser 61524 1.4 17.00

Storage Basket (Galvanized steel) Page 93 Storage Basket XLarge 97754 185 295.00 Highvisibility parts storage for manufacturing and warehousing. Features reinforced under carriage and support legs, fully galvanized finish and collapsible, stackable design for efficient storage. Folds flat for spacesaving storage, with front dropgate for easy access. Features and Benefits: * 4 Long x 40" Wide x 4 High, Outside measurements. * Rugged 2gauge x wire mesh with reinforced understructure. * Front Drop Gate with side latches for parts accessibility and identification. * Stackable up to 4 baskets high. * 4000lbs capacity. Fittings

Page 94 Ball & Socket Couplers (Bauer Style) Ball/socketbauer style (Black Steel) Ball: 31/ MM I.D. 1.97" 3.19" 3.6 4.41" 5.40" 6.11" 7.8 50 76 89 108 133 159 194 250 300 65000 65001 65002 65003 65005 65006 65007 96955 95816 0.3 0.5 0.8 1.4 1.9 2.3 4.4 10.2 8.7 4.00 5.00 11.00 11.00 13.50 17.50 32.00 35.00 103.00 Galvanized also available. (194) steel will fit to (203) cast aluminum. (108) steel will not fit to (102) cast aluminum. Ball/socketbauer style (Cast aluminum) Socket: Ball: 31/ 50 76 89 108 133 159 194 250 300 50 76 102 127 152 203 250 2.8 3.8 4.77" 5.79" 6.4 7.17" 9. 1.97" 3.19" 65008 65009 65010 65011 65013 65014 65015 97304 95817 65032 65033 65034 65035 65036 68042 96956 0.2 0.5 0.8 1.5 2.2 2.5 5.2 8.3 13.6 0.3 0.5 1.2 1.7 2.2 3.2 6.2 5.00 10.00 15.00 15.00 23.50 31.00 59.00 130.00 227.00 16.00 21.00 29.00 37.00 40.00 120.00 85.00 (127) and (152) alum./cast will fit to steel (133) and (159) Socket: 50 76 102 127 152 203 250 2.8 3.8 65038 65039 65040 65041 65042 68043 97305 0.3 0.7 1.4 2.1 2.6 4.0 5.5 25.00 35.00 40.00 45.00 50.00 140.00 130.00 Ball/socketbauer style (Stainless steel) Ball: 31/ MM 50 76 89 108 133 159 194 I.D. 1.97" 3.19" 3.6 4.41" 5.40" 6.11" 7.8 95326 95327 95328 95329 95330 95331 95332 0.3 0.7 0.8 1.5 1.8 2.3 4.3 33.00 52.00 55.00 102.00 105.00 155.00 267.00 Socket: 31/ 50 76 89 108 133 159 194 2.8 3.8 4.77" 5.79" 6.4 7.17" 9. 95333 95334 95335 95336 95337 95338 95339 0.3 0.7 0.9 1.5 2.0 2.3 4.3 38.00 69.00 75.00 117.00 149.00 225.00 290.00 Leverbauer style (Galvanized steel) 133 and 159 will fit to alum. and cast 127 and 152 *Locking Bar (part # 97318) for and Sold Separately 31/ * * 50 76 89 108 127/133 152/159 194/203 250 300 65024 65025 65026 65027 65029 65030 65031 96979 95818 2.4 3.4 4.3 5.20" 6.20" 7.20" 9.2 1.0 2.3 3.8 4.3 9.0 9.0 13.3 24.1 35.6 16.00 28.00 39.00 36.00 52.00 75.00 115.00 189.00 295.00

Page 95 Ball & Socket Couplers (Bauer Style) GasketBauer Style (Bauer Style) Locking Bar 31/ MM 50 76 89 108 127 / 133 152 / 159 194 250 300 I.D. 2.4 65016 3.4 65017 4.2 65018 5.20" 65019 5.9 65021 6.69" 65022 8.6 65023 96969 95819 0.1 0.1 0.2 0.2 0.2 0.5 0.6 1.1 1.6 1.10 1.90 6.00 3.50 6.70 7.00 11.50 15.00 28.00 97318 1.9 35.00 Safety Pin (Galvanized steel) Hose Adapterball Bauer Style (Galvanized Steel) Raised Ribs 2 2 3 2 3 3 2 50 76 108 159 194 50 76 108 133 159 194 250 300 95810 95811 95812 95813 95814 30684 30685 30686 30688 30689 30690 96975 97385 0.1 0.1 0.1 0.1 0.1 0.7 1.3 3.2 4.2 5.6 9.8 20.2 20.8 3.75 3.75 3.75 7.80 7.80 29.00 30.00 59.00 55.00 60.00 95.00 115.00 195.00 Hose Adaptersocket Bauer Style (Galvanized Steel) Raised Ribs 2 2 3 2 3 3 2 50 76 108 133 159 194 250 300 30691 30692 30693 30695 30696 30697 96977 97386 0.6 1.3 3.3 4.2 5.8 10.6 20.2 25.7 29.00 35.00 45.00 60.00 70.00 120.00 145.00 330.00 Hose Adapterball Bauer Style (Stainless Steel) Raised Ribs 2 2 3 3 3 50 76 108 159 194 95340 95341 95342 95343 95344 0.7 1.5 3.1 5.9 10.7 73.00 105.00 200.00 238.00 448.00 Fittings Hose Adaptersocket Bauer Style (Stainless Steel) Raised Ribs 2 2 3 3 3 50 76 108 159 194 95345 95346 95347 95348 95349 0.8 1.5 2.9 6.6 12.0 80.00 124.00 244.00 327.00 525.00

Page 96 Ball & Socket Fittings (Bauer Style) 90 o ElbowBauer Style (Galvanized steel) MM 50 69038 3.5 76 69039 7.2 31/ 89 69040 11.0 108 69041 12.8 133 69042 23.5 159 69043 27.1 194 69044 47.4 * 250 96963 62.3 * 300 97387 84.0 * Locking Bar (part # 97318) for & Lever is Sold Separately 65.00 105.00 150.00 155.00 225.00 279.00 340.00 625.00 1,075.00 45 o ElbowBauer Style (Galvanized steel) 31/ * * 50 76 89 108 133 159 194 250 300 69045 69046 69047 69048 69049 69050 69051 96961 97388 3.5 7.2 10.8 12.6 20.2 23.8 47.4 54.9 73.8 * Locking Bar (part # 97318) for & Lever is Sold Separately 55.00 107.00 150.00 155.00 199.00 255.00 330.00 545.00 975.00 Line Teestyle (Galvanized Steel) 31/ * * 50 76 89 108 133 159 194 250 300 69052 69053 69054 69055 69056 69057 69058 96980 97389 13.2 15.2 17.7 20.1 27.8 30.5 49.3 105.9 140.1 * Locking Bar (part # 97318) for & Lever is Sold Separately 90.00 105.00 195.00 150.00 195.00 339.00 450.00 850.00 1,620.00 End Teestyle (Galvanized steel) 31/ * * 50 76 89 108 133 159 194 250 300 69059 69060 69061 69062 69063 69064 69065 96965 97390 13.2 15.2 17.7 20.1 27.8 30.5 49.3 105.9 140.1 * Locking Bar (part # 97318) for & Lever is Sold Separately 90.00 105.00 195.00 150.00 195.00 339.00 450.00 850.00 1,620.00

Page 97 Ball & Socket Fittings (Bauer Style) End plugbauer Style (Galvanized steel) 31/ MM 50 76 89 108 133 159 194 250 300 69024 69025 69026 69027 69028 69029 69030 96964 97392 0.7 1.1 1.5 2.1 3.3 3.6 8.0 14.6 14.8 40.00 40.00 50.00 50.00 55.00 60.00 85.00 110.00 183.00 See previous page for lever. Adapter, mpt x Ball Bauer Style (Galvanized steel) 31/ * * 50 76 89 108 133 159 194 250 300 69010 69011 69012 69013 69014 69015 69016 96949 97393 3.1 5.5 6.0 10.3 14.7 15.9 25.2 40.0 51.1 * Locking Bar (part # 97318) for & Lever is Sold Separately 75.00 95.00 123.00 130.00 169.00 205.00 325.00 475.00 865.00 Lever is included. Adapter, mpt x socket Bauer Style (Galvanized steel) 31/ 50 76 89 108 133 159 194 250 300 69017 69018 69019 69020 69021 69022 69023 96950 97394 1.1 1.8 0.8 3.5 6.0 7.8 14.1 8.3 13.6 29.00 37.00 75.00 55.00 83.00 85.00 165.00 360.00 475.00 Bauer Style Dimensions (Steel) G I N O A B C D F H M L J K Fittings Size MM A B C D E F G H I J K L M N O 2 50 2.01 1.91 0.24 2.83 0.67 3.27 1.22 2.44 0.37 1.91 2.01 0.28 1.97 2.17 2.76 3 76 3.07 2.99 0.28 3.86 0.87 4.57 1.46 3.48 0.51 2.99 3.07 0.55 3.19 2.87 3.86 31/ 89 3.62 3.50 4.76 0.98 5.40 1.85 4.26 0.51 3.50 3.62 0.55 3.66 2.99 4.72 4 108 4.37 4.25 0.47 5.79 1.10 6.50 2.32 5.20 0.59 4.25 4.37 0.59 4.41 4.21 5.71 5 133 5.39 5.20 0.47 6.42 1.34 7.52 2.13 5.98 0.71 5.20 5.39 0.67 5.39 3.78 6.26 6 159 6.42 4.22 0.59 7.17 1.34 8.31 2.05 6.69 0.75 6.22 6.42 0.75 6.10 4.06 7.09 8 194 7.95 7.64 0.71 9.09 1.34 10.51 2.99 8.66 0.75 7.64 7.87 0.67 7.87 5.00 9.06 250 9.84 9.53 0.39 11.93 13.62 4.13 9.25 9.53 9.92 6.73 11.81 300 11.81 11.42 0.47 13.70 15.78 4.21 11.54 11.81 11.81 6.89 13.46 E

Page 98 Ball & Socket Couplers (100/200 Style) Ball/Socket100/200 Style (Black steel) Ball w/loose Ring (100 mm) (150 mm) (200 mm) (250 mm) (300 mm) 1 (400 mm) I.D. 3.9 7.80" 9.9 11.9 100 series 100 series 200 series 200 series 200 series 200 series 65044 65045 65050 65051 65052 97555 1.8 4.6 10.8 17.8 30.1 64.1 11.50 28.00 100.00 103.00 224.00 230.00 Gasket is included with socket. (3 Hook) (3 Hook) Socket w/lever attached (100 mm) (150 mm) (150 mm) (200 mm) (200 mm) (250 mm) * (300 mm) **1 (400 mm) 5.1 9.69" 9.69" 11.7" 14.6 100 series 100 series 100 series 200 series 200 series 200 series 200 series 200 series 65046 65047 96947 65053 97648 65054 65055 97556 2.4 3.8 5.0 9.8 13.4 30.3 57.7 22.00 35.00 45.00 125.00 125.00 115.00 227.00 230.00 * Locking Bar (part # 97318) for Lever is Sold Separately ** Straight Bar for 1 Lever is included Sealing Ring Gasket (100 mm) (150 mm) (200 mm) (250 mm) (300 mm) 1 (400 mm) 3.9 6.97" 9.21" 11.07" 13.99" 100 series 100 series 200 series 200 series 200 series 200 series 65048 65049 65056 65057 65058 97557 0.2 0.5 0.6 1.1 1.3 3.3 2.00 5.50 10.00 19.00 22.00 30.00

Page 99 Ball & Socket Fittings (100/200 Style) Hose adapterball 100/200 Style (Galvanized steel) (100 mm) (150 mm) (200 mm) (250 mm) (300 mm) 1 (400 mm) 100 series 100 series 200 series 200 series 200 series 200 series 69073 69074 69075 69076 69077 97558 3.6 7.9 16.2 27.8 42.2 82.9 49.00 75.00 170.00 185.00 295.00 385.00 Hose adaptersocket 100/200 Style (Galvanized steel) (100 mm) (150 mm) (200 mm) (250 mm) * (300 mm) **1 (400 mm) 100 series 100 series 200 series 200 series 200 series 200 series 69078 69079 69080 69081 69082 97559 4.2 7.1 15.2 23.4 42.4 76.5 55.00 75.00 195.00 199.00 340.00 405.00 * Locking Bar (part # 97318) for Lever is Sold Separately ** Straight Bar for 1 Lever is included 90 o Elbow 100/200 Style (Galvanized steel) (100 mm) (150 mm) (200 mm) (250 mm) (300 mm) 100 series 100 series 200 series 200 series 200 series 69083 69084 69085 69086 69087 9.9 21.7 34.8 50.8 86.5 135.00 185.00 399.00 445.00 750.00 Fittings 45 o Elbow 100/200 Style (Galvanized steel) (100 mm) (150 mm) (200 mm) (250 mm) (300 mm) 100 series 100 series 200 series 200 series 200 series 69088 69089 69090 69091 69092 9.7 18.4 31.4 43.4 76.3 125.00 170.00 350.00 380.00 665.00

Page 100 CamLoc Fittings Female Thread x Male CamLoc (Cast Aluminum) "A" series Female Thread x Female CamLoc (Cast Aluminum) "D" series w w 1/ 3/ 1" 11/ 11/ 21/ 1/ 3/ 1" 11/ 11/ 21/ Width 21/ 35/ 43/ 53/ 615/1 21/ 35/ 43/ 53/ 615/1 95889 95890 95891 95892 95893 66918 66919 66920 66921 66922 66923 66897 97584 95904 95905 95906 95907 95908 66924 66925 66926 66927 66928 66929 69788 97585 0.1 0.1 0.1 0.2 0.3 0.4 0.6 0.7 1.3 1.6 2.0 10.9 9.9 0.2 0.2 0.4 0.7 0.8 0.9 1.2 1.8 2.8 3.4 5.1 9.5 12.5 3.50 3.50 4.00 5.00 5.00 5.00 9.00 10.00 17.00 30.00 33.00 125.00 285.00 7.80 7.50 8.50 10.50 10.00 12.00 18.00 19.00 28.00 48.00 56.00 220.00 455.00 Male Thread x Male CamLoc (Cast Aluminum) "F" series Male Thread x Female CamLoc (Cast Aluminum) "B"series CamLoc fittings *Note: Plastic, Stainless Steel, and Brass CamLoc Fittings available, please call. *Note: CamLoc fittings can also be used for fast & easy suction fittings. * Please note: & mfg. by different companies may not interchange. 1/ 3/ 1" 11/ 11/ 21/ 1/ 3/ 1" 11/ 11/ 21/ 21/ 35/ 43/ 53/ 615/1 21/ 35/ 43/ 53/ 615/1 95914 95915 95916 95917 95918 66930 66931 66932 66933 66934 66935 96959 97586 95894 95895 95896 95897 95898 66936 66937 66938 66939 66940 66941 97587 97588 Size 1/ through 2 1/ through through through 0.1 0.2 0.2 0.3 0.5 0.7 1.0 1.3 2.3 2.9 3.9 7.9 10.6 0.2 0.2 0.4 0.6 0.7 0.9 1.0 1.6 2.4 3.3 5.0 8.0 12.1 Working Pressure MAX. (PSI) 250 150 75 50 4.90 4.50 5.00 6.50 5.50 6.50 11.50 13.00 22.00 37.00 48.00 145.00 312.00 6.50 7.00 8.50 10.00 10.00 12.00 17.00 19.00 26.00 48.00 59.00 210.00 460.00

Page 101 Fittings series "E" Hose Barb x Male CamLoc (Cast Aluminum) 0.1 0.1 0.2 0.3 0.4 0.6 0.9 1.3 2.1 3.6 6.2 10.0 12.9 21/ 35/ 43/ 53/ 615/1 95909 95910 95911 95912 95913 66900 66901 66902 66903 66914 66915 66899 97589 3.50 3.50 4.00 5.30 5.00 6.00 12.00 12.00 17.50 40.00 51.00 235.00 380.00 "C" series Hose Barb x Female CamLoc (Cast Aluminum) 6.50 6.50 7.50 10.00 10.00 11.00 16.50 18.50 27.50 52.00 68.00 285.00 595.00 0.2 0.3 0.4 0.7 0.7 1.0 1.3 2.2 3.2 3.9 7.7 15.5 16.7 1/ 3/ 1" 11/ 11/ 21/ 21/ 35/ 43/ 53/ 615/1 95899 95900 95901 95902 95903 66904 66905 66906 66907 66916 66917 66898 97590 OD 1.024 1.375 1.563 1.938 2.188 2.625 3.125 3.719 4.875 5.906 7.063 9.125 11.875 Gasket, CamLoc 96748 96749 96750 96751 96752 66908 66909 66910 66911 66912 66913 95876 97591 0.1 0.1 0.1 0.2 0.4 0.60 0.60 0.60 0.60 0.60 0.60 0.70 0.70 1.00 2.10 2.50 5.00 15.00 1/ 3/ 1" 11/ 11/ 21/ 1/ 3/ 1" 11/ 11/ 21/ CamLoc Fittings End Plug (Dust Plug) CamLoc (Cast Aluminum) End Cap (Dust Cap) CamLoc (Cast Aluminum) "DP "DC" 0.2 0.2 0.3 0.6 0.6 0.8 1.0 1.3 2.3 3.1 4.7 9.0 12.5 1/ 3/ 1" 11/ 11/ 21/ 21/ 35/ 43/ 53/ 615/1 95919 95920 95921 95922 95923 95924 95925 95926 95927 95928 95929 96832 97592 0.1 0.1 0.1 0.2 0.3 0.3 0.5 0.7 1.2 1.5 2.5 4.0 5.4 1/ 3/ 1" 11/ 11/ 21/ 21/ 35/ 43/ 53/ 615/1 95930 95931 95932 95933 95934 95935 95936 95937 95938 95939 95940 97593 97594 5.70 5.00 7.50 10.00 9.00 10.00 13.00 18.00 21.00 42.00 51.00 205.00 415.00 3.00 3.00 4.00 4.50 3.50 4.50 8.50 7.50 12.50 23.00 28.00 99.00 212.00 ID 0.669 0.875 1.063 1.359 1.625 2.000 2.375 3.000 4.000 4.875 6.000 8.000 9.875

Page 102 Elbows Ringlock Elbow (Galvanized steel) Ringlock 90 o Elbow Male x Male (Galvanized steel) 45 o 90 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 0 x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o 97395 97396 97397 60310 60311 60312 97398 97399 97400 97401 60320 60321 60322 97402 97403 97404 97405 95350 95351 95352 97406 4.8 7.5 9.6 11.3 15.9 19.3 31.6 7.4 12.0 15.2 23.7 24.9 30.6 45.2 7.6 12.0 15.2 14.8 23.1 30.7 45.2 89.00 102.00 120.00 115.00 140.00 165.00 250.00 125.00 145.00 150.00 135.00 175.00 225.00 310.00 125.00 145.00 150.00 135.00 175.00 225.00 310.00 Ringlock Elbow (Cast aluminum) Ringlock clamp is not included. Twist Lock Elbow (Cast aluminum) 45 o 90 o 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 45 o 97407 97408 60370 60371 60372 97409 97410 97411 60380 60381 60382 97412 60313 3.7 4.7 6.2 8.3 10.3 14.5 4.4 5.5 8.2 10.8 15.3 20.0 5.6 96.00 122.00 135.00 165.00 205.00 368.00 117.00 146.00 159.00 189.00 259.00 495.00 185.00 90 o x 90 o 60314 6.1 215.00 * for other twistlock sizes Plain Elbow (aluminum) Surface Elbow (PVC) 45 o 90 o 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 0 x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 45 o x 45 o x 45 o x 45 o 60354 60355 60350 60356 60351 60352 60353 69001 60364 60365 60360 60366 60361 60362 60363 68021 60340 60341 60342 60343 1.7 1.8 2.6 3.2 3.3 4.6 5.6 2.0 2.3 2.8 4.6 4.5 6.5 8.0 69.00 75.00 85.00 89.00 105.00 110.00 130.00 315.00 79.00 89.00 89.00 105.00 125.00 135.00 165.00 375.00 75.00 90.00 115.00 145.00 90 o x 90 o x 90 o x 90 o x 90 o 60344 60345 60346 60347 85.00 105.00 145.00 185.00

Page 103 Elbows Hook style elbow (Cast Aluminum) 45 o x 45 o x 45 o x 45 o 60390 60391 60392 3.0 4.0 5.0 71.00 85.00 106.00 90 o x 90 o x 90 o x 90 o 60395 60396 60397 3.0 4.0 5.0 53.00 68.00 87.00 Knob Style Elbow (Cast aluminum) 45 o x 45 o x 45 o x 45 o x 45 o x 45 o 60403 60404 60405 60406 60407 2.1 2.8 4.1 6.9 9.1 82.00 98.00 124.00 167.00 199.00 Sweeping Elbow Weldon (Cast aluminum) Sweeping Elbow Weldon (Black steel) 90 o 45 o 90 o 45 o x 90 o x 90 o x 90 o x 90 o x 90 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 45 o x 45 o x 45 o 41/ x 45 o x 45 o 65/ x 45 o x 45 o 85/ x 45 o x 45 o Thickness.200".200".190".190".190".190" 60398 60399 60400 60401 60402 60270 60271 69943 60272 60273 60274 97413 60275 60276 69942 60277 60278 60279 97414 60075 60076 60077 97755 60078 97756 96813 97757 97776 2.1 2.8 4.1 6.9 9.1 1.0 1.0 1.5 2.0 3.5 4.8 5.5 1.5 1.7 2.3 4.0 6.0 9.5 11.0 2.0 4.0 5.5 3.0 10.0 6.0 15.0 11.0 59.00 75.00 99.00 139.00 175.00 27.00 28.00 40.00 48.00 58.00 85.00 199.00 46.00 50.00 65.00 78.00 94.00 143.00 329.00 20.00 35.00 55.00 10.00 59.00 25.00 59.00 45.00 75.00 90 o x 90 o x 90 o x 90 o 41/ x 90 o x 90 o x 90 o 65/ x 90 o x 90 o 85/ x 90 o x 90 o Thickness.200".200".07.190".190".190".190" "A" 5.2 16.2 8.50" 11.50" 60001 60002 60003 97758 97658 60004 97759 69939 97760 97777 2.0 4.0 5.7 6.0 13.4 12.0 24.5 22.1 26.00 33.00 54.00 15.00 77.00 83.00 35.00 110.00 65.00 130.00 Fittings Mitered Elbow Weldon 10ga. (Black steel) 45 o x 45 o x 45 o x 45 o x 45 o x 45 o x 45 o 60280 60281 60282 60283 60268 60269 1.5 3.6 6.1 10.8 12.3 15.9 42.00 48.00 59.00 70.00 95.00 115.00 10 gauge Measurements: 45 deg x extensions 90 deg xx 90 o x 90 o x 90 o x 90 o x 90 o x 90 o x 90 o 60284 60285 60286 60287 60288 60289 2.1 5.4 9.3 14.1 19.7 26.1 61.00 65.00 95.00 105.00 135.00 195.00

Page 104 End Tees & Elbow Flanged 90 o Elbow (Galvanized steel) 97415 95825 95826 95827 97416 27.7 39.0 52.8 67.1 86.8 165.00 275.00 325.00 385.00 485.00 Also Available in Cast Aluminum, call for prices. Plain End tee (Aluminum) 60444 60445 60440 60446 60441 60442 60443 68026 3.3 3.6 3.9 6.6 6.6 8.9 11.5 16.1 90.00 90.00 99.00 120.00 160.00 185.00 225.00 670.00 Ringlock End tee (Galvanized steel) 97417 97418 97419 60410 60411 60412 97420 9.0 13.6 17.0 19.6 27.1 33.3 52.0 150.00 165.00 192.00 155.00 205.00 315.00 359.00 Ringlock clamp is not included. Ringlock End tee (Cast aluminum) 97421 97422 60430 60431 60432 6.2 7.5 9.6 13.4 17.3 175.00 205.00 214.00 273.00 335.00 Ringlock clamp is not included. Hook style End tee (Cast aluminum) 60450 60451 60452 2.6 3.8 4.8 79.00 89.00 159.00 Twist lock End tee (Cast aluminum) 60316 9.1 245.00

Page 105 Tees Knob style End tee (Aluminum) * * 60460 60461 60462 60463 60464 2.6 3.5 6.4 7.3 8.8 95.00 99.00 118.00 195.00 215.00 * Fabricated Aluminum. Surface end tee (PVC) 60447 60448 60449 60453 107.00 135.00 167.00 225.00 Flanged tee (Galvanized steel) 97423 95822 95823 95824 97424 32.6 44.9 61.2 78.1 103.0 215.00 259.00 320.00 432.00 500.00 Also Available in Cast Aluminum, call for prices. Weldon tee (Cast aluminum) 97425 69940 69941 60290 60291 60292 1.5 2.0 2.5 3.0 5.8 8.0 65.00 71.00 78.00 88.00 120.00 145.00 Weldon tee (Black steel) 60293 60294 60295 60296 60297 60298 11.5 15.4 14.3 21.2 29.0 38.0 85.00 93.00 90.00 110.00 120.00 160.00 Fittings 10 gauge Measurements: x extensions

Page 106 Line Tees & Y Tees Plain Line Tee (Aluminum) 60644 60645 60640 60646 60641 60642 60643 68025 3.3 3.6 3.9 6.6 6.6 8.9 11.5 16.1 90.00 90.00 99.00 120.00 160.00 185.00 225.00 670.00 Ringlock line tee (Galvanized Steel) 97426 97427 97428 60610 60611 60612 97429 9.0 13.6 17.0 19.6 27.1 33.3 52.0 150.00 165.00 192.00 155.00 205.00 315.00 359.00 Ringlock line tee (Cast aluminum) 97430 97431 60630 60631 60632 6.2 7.5 9.6 13.4 17.3 175.00 205.00 214.00 273.00 335.00 Surface line tee (PVC) 60647 60648 60649 60653 107.00 135.00 167.00 225.00 Twist lock line tee (Cast aluminum) 60317 9.1 245.00 Hook style line tee (Cast aluminum) 60650 60651 60652 4.0 5.0 7.0 86.00 106.00 140.00

Page 107 Line Tees & Y Tees Knob style line tee (Cast aluminum) 60660 60661 60662 60663 60664 2.8 3.8 5.0 11.9 14.0 95.00 99.00 118.00 195.00 215.00 Plain line y tee (Aluminum) 60550 60551 60552 153.00 175.00 196.00 Plain y tee (Aluminum) 60540 60541 60542 68027 7.2 9.6 12.5 220.00 260.00 329.00 610.00 Ringlock y tee (Galvanized steel) 60510 60511 60512 24.7 33.8 41.8 300.00 320.00 355.00 Ringlock y tee (Aluminum) 60530 60531 60532 7.7 10.5 13.5 269.00 279.00 359.00 Fittings

Page 108 Reducers Plain reducer (Aluminum) x x x x x x x x 60614 60615 81428 60710 60713 60711 60712 69002 1.8 2.0 3.7 2.8 7.2 3.9 4.0 59.00 60.00 95.00 69.00 135.00 75.00 89.00 295.00 Ringlock reducer (Galvanized steel) x x x x 60730 60733 60731 60732 6.4 9.6 9.3 12.7 85.00 175.00 98.00 129.00 Hook style reducer (Cast aluminum) x x 60720 60721 2.0 3.0 52.00 53.00 Knob style reducer (Cast aluminum) x x x x 60717 60718 60719 60709 1.6 2.3 2.8 4.8 85.00 104.00 126.00 138.00

Page 109 Reducer & Increasers Surface reducer (PVC) x x x 60714 60715 60716 59.00 72.00 87.00 Plain increaser (Aluminum) x x x x 60740 60741 60742 69003 4.8 6.3 9.1 85.00 105.00 135.00 325.00 Ringlock increaser (Galvanized steel) x x 60760 60761 11.3 14.3 98.00 129.00 Surface increaser (PVC) x x x 60743 60744 60745 59.00 72.00 87.00 Fittings

Page 110 End Plugs Plain end plug (Aluminum) 60810 60814 60811 60812 60813 68020 1.4 2.4 2.5 3.8 4.6 46.00 55.00 55.00 60.00 69.00 115.00 Ringlock end plug (Galvanized steel) 97432 97433 97434 60830 60831 60832 97435 1.8 2.3 3.5 4.9 6.9 9.9 15.1 45.00 50.00 55.00 50.00 60.00 95.00 110.00 Hook style end plug (Cast aluminum) 60821 60822 60820 60823 60824 1.0 1.5 2.0 3.0 4.0 23.00 27.00 38.00 50.00 55.00 Twist lock end plug (Cast aluminum) 60315 3.5 115.00

Page 111 End Plugs & End Caps Knob style end plug (Cast aluminum) 60833 60834 60835 60836 60837 0.8 1.3 1.8 2.3 3.0 26.00 27.00 35.00 45.00 49.00 Surface end plug (PVC) 60815 60816 60817 60818 28.00 34.00 42.00 54.00 Ringlock End Cap (Galvanized steel) 97436 97437 97438 60870 60871 97439 97440 1.6 2.3 3.5 4.1 8.2 9.9 15.1 45.00 50.00 55.00 66.00 80.00 95.00 110.00 End plug cover, w/handle, weldon (Cast aluminum) 97620 97621 97622 1.5 2.5 3.3 43.00 60.00 68.00 Fittings Aluminum end plug cover fits coupler weld socket for fabricating end plugs.

Page 112 Hooks Universal Hook (Galvanized steel) 60904 0.5 3.90 Anderson Hook (Painted steel) 40012 0.5 4.20 A & M Long Hook (Galvanized steel) 40013 4.30 A & M Short Hook (Galvanized steel) 40014 0.4 4.30 Nuts & bolts (For band & hook) Bolt, 3/x11/ Grade 5 Nut, 3/ Grade 2 Ferrule, 5/1 width Ferrule, 1/ width 60901 60902 60903 60899 0.1 0.30 0.08 0.50 0.60 Bolt, 3/x long Grade 5 Nut, 3/ Grade 2 60905 60906 0.4 0.1 1.70 0.50

Page 113 Band & Hook Single Band & Hook (Galvanized steel) Single Complete Assembly includes 1 band, 1 hook, 2 bolts, 2 nuts and 1 ferrule. Complete: 7" 9" 60913 60914 60910 60922 60920 60923 60930 60932 60940 60945 0.5 0.6 0.6 0.8 2.8 3.0 3.8 4.0 4.5 5.0 8.80 9.50 10.20 11.00 11.70 12.60 13.80 15.00 15.60 19.00 Single Band Only Assembly includes 1 band and 1 nut & bolt Double Band & Hook (galvanized steel) Double Complete Assembly includes 1 band, 2 hooks, 3 bolts, 3 nuts and 2 ferrules. Band Only: 7" 9" Complete: Band Only: 60915 60916 60911 60924 60921 60925 60931 60933 60941 60942 60950 60960 60970 60980 60990 60951 60961 60971 60981 60991 0.4 1.3 1.9 2.2 2.8 2.1 3.4 1.4 3.6 4.6 5.3 5.8 0.3 2.5 3.1 3.7 0.3 4.90 5.70 6.50 7.20 8.00 9.00 10.00 11.50 12.00 13.10 26.50 27.80 29.80 31.50 35.00 22.00 23.50 25.20 27.00 28.00 Nuts/bolts/washers (For chemigation valves) Bolt KitFlange (complete set of nuts, bolts, flat & lock washers):, (set of 4) 5/x long 95882 (set of 8) 5/x long 95883,, (set of 8) 3/x long 95884 4.9, (set of 12) 7/x long 95881 10.7 8.00 13.00 22.00 44.00 Nuts/bolts/washers (For wafer valves) Bolt, 3/ x 51/ Grade 5 95880 3.80 Standard Bolt KitWBV (complete set of nuts, bolts, flat & lock washers) For Steel Flanges:, (set of 4) 5/x long 95886 10.00 (set of 8) 5/x 41/ long 95887 5.0 29.00,, (set of 8) 3/x long 95888 7.8 30.00, (set of 12) 7/x 51/ long 95885 17.7 100.00 1 (set of 16) 1" x 51/ 97663 95.00 1 (set of 16) 11/ x 51/ 97664 159.00 Fittings Standard Bolt KitWBV (complete set of nuts, bolts, flat & lock washers) For PVC Flanges:, (set of 4) 5/x long 96864 12.00 (set of 8) 5/x long 96865 28.00,, (set of 8) 3/x 7" long 96866 60.00, (set of 12) 7/x long 96863 120.00

Page 114 Band & Latch Accessories Band & Latch (Knob Style) 60992 60993 60994 60995 60996 0.4 0.5 0.9 1.6 1.8 8.10 8.90 12.10 15.20 19.00,,, Latch Only (Knob Style) CX, DX, 60946 60952 0.3 0.3 4.50 4.50 CX DX Band Only (Knob Style) 60953 60954 60955 60956 60957 0.6 0.7 0.8 1.4 1.7 4.10 4.90 8.30 11.40 15.50 * Includes Nuts and Bolts Carriage Bolt & Nut (Knob Style band & latch) 5/1 x 1" long ( back) 5/1 x 11/ long (,, front) 3/ x 11/ long (, back)(2 req) 3/ x 13/ long (, front) Nut, 5/1 Nut, 3/ 60947 60962 60963 60964 60965 60966 0.1 0.1 0.1 0.1 0.1 0.1 0.20 0.30 0.30 0.50 0.10 0.15

Page 115 Band & Latch Accessories D Ring Weldon Steel 60841 10.00 D Ring Bolton (Cast Aluminum) 60842 0.4 5.70 Bail Ring w/steel Bracket w/aluminum Bracket,, w/aluminum Bracket 60846 60847 60848 37.00 37.00 20.00 Lug Weldon (Aluminum) Aluminum Aluminum * To match above Bail Rings 60849 60851 0.2 0.1 7.00 4.50 Lock Plate Stub (Cast Aluminum) 60843 5.00 *Older ones are steel Fittings Knob Weldon (Cast Aluminum) 60844 0.1 4.50

Page 116 Rings Ring Weldon (Cast Aluminum) 61010 61011 61012 0.6 0.9 1.1 12.00 15.00 18.00 Ring Weldon (Black steel) 61020 61021 61022 1.0 1.1 1.4 9.00 12.00 14.00 Ring bolton (Painted steel) 95806 61032 61033 61035 95807 1.2 1.7 2.1 2.6 9.50 11.00 12.00 14.00 15.00 Max. 50 psi Ringlock Clamp (Plated Steel) A&M(small): 60083 60084 60085 2.0 2.5 3.5 22.00 24.00 27.00 Pierce(small): 61060 2.0 21.00 Standard: 7" 61047 61038 61039 61040 61036 61041 61042 61037 1.4 1.6 1.8 2.0 2.3 2.7 3.5 5.3 17.00 17.00 18.00 18.00 23.00 20.00 25.00 30.00 Oversized: 61043 61044 61045 2.0 2.5 3.5 22.00 24.00 28.00

Page 117 Ring Accessories & Discs Horseshoe Clamp (Painted Steel) 7" 61050 61054 61051 61052 1.5 1.6 1.7 2.1 21.00 19.00 23.00 26.00 Up to 50 psi Bail Spring 61046 0.5 3.30 U Holder for Telescope 60862 0.5 20.00 Locking Block Aluminum Steel 60840 60850 0.3 0.3 6.00 4.00 Steel Aluminum U Holder Aluminum Steel 60861 60860 0.1 0.3 8.00 3.00 Disc Weldon (Aluminum).090 wall thickness. Disc Weldon (Black steel) 7" 9" 7" 9" 11" Thickness 3/1 3/1 3/1 3/1 3/1 1/ 3/1 1/ 3/1 1/ 3/1 61156 61157 61159 61158 61160 95808 61161 95809 61162 61163 61170 61171 61150 61172 61151 61173 61152 61175 61153 61176 61174 0.1 0.3 0.5 0.8 1.0 1.7 0.5 2.0 2.5 0.1 0.2 0.4 1.1 1.0 2.8 3.3 4.6 4.0 6.8 5.8 3.00 4.00 5.00 6.00 8.00 7.50 11.00 12.50 14.00 18.00 2.00 3.00 4.00 5.00 6.00 9.00 10.00 11.00 13.00 17.00 18.00 Fittings

Page 118 Flanges Flange (Black steel) Includes Gasket Specifications: Carbon Steel (either A36 plate OR A283C plate) Polyurethane coating (to avoid rust in transit) Mil finished plate x mchnd (125250rms) facing 1/ thick; #150 psi test Full Face flanges; Standard Bolt Holes 1/1 red rubber flange gasket included DIN Flanges also available (please call) OD Size 21/ 1 1 1 20" 2 2 IPS Size 41/ 65/ 85/ 103/ 123/ For Valve Outlet 61104 61105 61106 61107 61108 61110 61111 61112 61109 81440 81441 81442 81443 81444 81445 96915 69674 69675 69676 69677 69678 69679 69680 69681 3.5 4.5 5.3 7.1 8.2 9.3 12.9 16.6 23.0 26.5 31.0 32.0 37.5 38.5 51.0 6.6 8.7 11.7 14.9 22.1 6.1 8.9 13.00 18.00 12.50 17.00 19.00 21.00 29.00 40.00 59.00 114.00 149.00 179.00 210.00 249.00 375.00 17.00 21.00 29.00 40.00 59.00 21.00 29.00 82.00 145.00 Larger sizes available, please call for pricing and availability. Size Part # Thickness ID OD Bolt Circle # of Holes Hole Size Bolt Size 2 61104 1/2 21/16 6 43/4 4 3/4 5/8 21/2 61105 1/2 29/16 7 51/2 4 3/4 5/8 3 61106 1/2 31/16 7.5 6 4 3/4 5/8 4 61107 1/2 41/16 9 71/2 8 3/4 5/8 41/2 IPS Size 96915 1/2 4.57 9 71/2 8 3/4 5/8 5 61108 1/2 51/16 10 81/2 8 7/8 3/4 6 61110 1/2 61/16 11 91/2 8 7/8 3/4 65/8 IPS Size 69674 1/2 6.72 11 91/2 8 7/8 3/4 6 For Valve Outlet 69678 1/2 81/16 11 91/2 8 7/8 3/4 8 61111 1/2 81/16 13.5 113/4 8 7/8 3/4 85/8 IPS Size 69675 1/2 8.72 13.5 113/4 8 7/8 3/4 8 For Valve Outlet 69679 1/2 101/16 13.5 113/4 8 7/8 3/4 10 61112 1/2 101/16 16 141/4 12 1 7/8 103/4 IPS Size 69676 1/2 10.88 16 141/4 12 1 7/8 10 For Valve Outlet 69680 1/2 121/16 16 141/4 12 1 7/8 12 61109 1/2 121/16 19 17 12 1 7/8 123/4 69677 1/2 12.88 19 17 12 1 7/8 12 For Valve Outlet 69681 1/2 14.13 19 17 12 1 7/8 14 81440 1/2 14.13 21 183/4 12 11/8 1 16 81441 1/2 16.13 23.5 211/4 16 11/8 1 18 81442 1/2 18.13 25 223/4 16 11/4 11/8 20 81443 1/2 20.13 27.5 25 20 11/4 11/8 22 81444 1/2 22.13 29.5 271/4 20 13/8 11/4 24 81445 1/2 24.13 32 291/2 20 13/8 11/4

Page 119 Flanges Flange (Cast aluminum) 61055 61116 61117 61113 61114 61115 61103 3.0 4.2 5.2 6.3 8.1 12.3 17.5 65.00 67.00 73.00 78.00 99.00 151.00 232.00 Includes Gasket Flange Square (Black steel) 95466 95467 95468 3.0 1.9 3.1 15.00 19.00 23.00 Flange Gasket Size Thickness (Red rubber) 21/ 1/1 1/1 1/1 61101 96814 61102 1.75 2.50 2.50 1 1 1 20" 2 (Full Face) 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 61118 61119 61120 61121 61122 61123 97797 97798 97799 97800 97801 0.2 0.2 0.3 0.3 0.3 0.5 3.00 3.70 3.50 4.00 4.75 6.75 13.00 15.00 17.00 19.00 22.00 1/ 21/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1 1/ 1 1/ 1 1/ 20" 1/ 2 1/ 2 1/ 69666 97802 69667 69668 69669 69670 69671 69672 69673 81340 81341 81342 81343 81344 81345 1.50 1.75 2.00 2.80 3.40 4.20 5.80 7.20 10.50 17.00 21.00 24.00 28.00 30.00 45.00 Fittings

Page 120 Flanges Flange blind (Black Steel) 21/ 1 1 1 20" 2 OD 7" 71/ 9" 11" 131/ 1 19" 21" 231/ 2 271/ 3 Thickness 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 69707 69708 69709 69710 69711 69712 69713 69714 97724 97725 97726 97727 97728 4.0 5.5 6.5 9.2 13.8 21.3 28.1 42.3 51.5 60.0 70.0 90.0 125 28.00 38.00 25.00 33.00 47.00 69.00 110.00 140.00 165.00 329.00 205.00 265.00 355.00 Flange female thread (Cast Iron) Thread Size 21/ OD 7" 71/ 9" 11" 131/ 1 19" Thickness 5/ 5/ 5/ 5/ 3/ 3/ 1" 1" 1" 69639 69640 69641 69642 69643 69644 69645 69646 69647 5.1 7.1 7.9 13.2 15.2 19.0 30.3 43.3 64.4 18.00 21.00 27.00 36.00 48.00 55.00 90.00 155.00 246.00 * Female pipe thread ID Flange Insulation Kit 96928 0.4 18.00 Includes: * NitrileFace Phenolic Full Face Flange Gasket * Mylar Sleeves * Phenolic Washers (single washer kit) * Steel Washers (single washer kit) * Bolts & Nuts NOT included 21/ 1 1 1 20" 2 2 This cathodically insulated kit prevents stray currents which cause undue corrosion and eventual breakdown of the metal. Also prevents leakage. 96929 96930 96931 96932 96933 96934 96935 96936 96937 96938 96939 96940 96941 96942 21.00 22.00 35.00 39.00 43.00 52.00 77.00 95.00 112.00 175.00 154.00 189.00 260.00 229.00 0.6 0.6 0.8 1.0 1.2 1.6 3.0 3.2 4.2 5.6 6.4 7.2 8.5 9.8

Page 121 Cones Cone (Black steel) x x x x x x x x x 7" x 7" x 7" x x x x x x 9" 9" x x x x x x 1 x 1 x 1 x 1 x 1 x 1 x 1 1 x 1 1 x 1 20" x 1 20" x 1 2 x 1 2 x 20" 2 x 20" 2 x 2 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 14 Gauge 10 Gauge 14 Gauge 14 Gauge 14 Gauge 12 Gauge 14 Gauge 14 Gauge 12 Gauge 10 Gauge 12 Gauge 12 Gauge 12 Gauge 10 Gauge 12 Gauge 10 Gauge 12 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 10 Gauge 61185 61186 61187 61188 61189 61190 61130 69747 61191 61192 61193 61194 61131 61195 61132 69748 61196 61197 61133 69749 61138 69750 61198 68100 68101 97690 97689 68102 68103 68104 68105 68106 68107 68108 68109 68110 68111 0.5 1.0 0.5 1.5 0.7 2.0 1.2 2.3 0.9 1.0 1.0 1.4 2.5 3.0 2.5 3.2 1.7 2.2 3.2 4.1 4.0 5.0 7.5 9.0 5.0 11.0 6.0 15.0 7.0 16.0 7.5 7.00 9.50 6.00 12.00 11.00 18.00 13.00 17.00 12.00 13.00 14.00 15.00 32.00 26.00 19.00 21.00 18.00 23.00 24.00 31.50 30.00 41.50 58.00 87.00 49.00 135.00 159.00 115.00 71.00 212.00 85.00 240.00 100.00 275.00 145.00 310.00 297.00 Cone (Cast aluminum) x x x x x x x x x 7" 9" x x x Cast Aluminum Cast Aluminum Cast Aluminum Cast Aluminum Cast Aluminum Cast Aluminum Cast Aluminum Cast Aluminum Aluminum Aluminum Cast Aluminum Cast Aluminum 61125 61126 61127 61128 61134 61129 61135 61136 61164 61165 61137 60865 0.3 0.3 1.5 0.8 1.8 1.0 4.1 2.3 0.2 4.0 5.0 10.50 12.00 12.00 18.00 29.00 24.00 89.00 39.00 24.00 38.00 52.00 76.00 Fittings

Page 122 Eccentric Cones Eccentric Cone (Black steel) x x x x x x x x x x x x x x x x 61124 61139 61145 61146 61147 61148 61140 61149 61141 61154 61142 61180 61143 61144 61181 61182 2.3 3.0 2.5 3.8 3.3 5.0 4.3 3.8 10.5 10.0 8.8 14.0 12.5 13.0 15.0 13.5 33.00 39.00 37.00 48.00 46.00 60.00 59.00 54.00 75.00 73.00 68.00 105.00 105.00 109.00 120.00 114.00 Eccentric Cone (Cast aluminum) 21/x x 61177 61178 3.3 5.3 75.00 105.00 *Can be cut to fit fabricated size.

Page 123 Telescopes & Drop Pipe Telescope (Aluminum) Ringlock: x 24' x 510' x 1020' x 24' x 510' x 1020' 61220 61221 61222 61223 61224 61225 6165_ 6166_ x 24' 61226 Felton Gasket Rainway Gasket x 510' 61227 x 1020' 61228 Heavy wall aluminum construction. Male x Female Ends. Includes gaskets and chain. Ringlock clamp not included. Double Chain Telescopes also available. 15.5 26.5 44.7 20.5 33.7 55.6 21.7 37.1 62.7 290.00 345.00 455.00 340.00 410.00 540.00 425.00 495.00 675.00 Add Double Chain DOUBLECHAIN 63.00 Drop Pipe (Aluminum) 6166_ Rainway Gasket x 715' to x 715'* 61310 61320 32.2 39.3 495.00 580.00 6165_ Felton Gasket Heavy wall aluminum construction. Female x Female ends. Complete with gaskets & chain. *Larger fitting is on elbow end. Specify make & model of pivot when ordering. Fittings 6165_ Felton Gasket Drop Hose also available. Please call for price.

Page 124 Gate Valves & Ball Valves Flanged Gate Valve (Cast Iron) 1 61347 61348 61349 62070 62080 61350 61351 97778 57.0 94.0 153.0 138.0 213.0 364.0 392.0 1224.0 280.00 410.00 539.00 595.00 875.00 1,385.00 2,480.00 5,575.00 Female Thread Gate Valve (Brass) 1/ 3/ 1" 61336 61338 61339 61340 61341 61342 0.6 0.8 1.2 3.2 9.9 17.5 8.50 12.00 18.00 47.00 140.00 252.00 IPS gasketed gate valve (Cast iron) IPS gasketed IPS gasketed IPS gasketed 69717 69718 69719 70.0 132.0 214.0 420.00 595.00 1020.00 With operation nut Gate Valve (PVC) IPS Slip x Slip (Solvent weld) Unrestricted Flow Quick Opening Trouble Free Simplicity Low Pressure Low Vacuum Low Cost Handle Metal Stainless Steel Stainless Steel Stainless Steel Stainless Steel Max PSI 20 psi 10 psi 10 psi 10 psi 10 psi 95323 95324 95325 97691 97692 4.5 16.0 18.0 53.0 55.0 145.00 589.00 820.00 1,450.00 1,550.00 Applications include: Liquids Gases Dry Bulk/Solids Slurry Electric on/off hydraulic wafer valve 97706 97707 97708 575.00 825.00 1,495.00 With Solenoid Valve and 3way Selector Includes filter, 3way selector, and solenoid. 120V AC Solenoid Standard Also available in 12v DC, 12v AC, 24v AC, or 24v DC solenoid.

Female Thread gate valve (PVC) Page 125 Gate Valves & Ball Valves 1/ 3/ 1" 61352 61353 61354 61355 0.5 0.5 0.7 2.0 25.00 31.00 36.00 82.00 Female Thread ball valve (Brass) 1/ 3/ 1" 61331 61332 30560 61333 61334 61335 0.5 0.4 0.8 1.6 13.5 11.6 8.50 10.00 19.00 46.00 155.00 185.00 Female Thread ball valve (PVC) 1/ 3/ 1" 61343 61344 61345 61346 69697 69698 0.2 0.4 0.5 1.6 4.7 9.3 2.00 3.00 4.00 11.00 54.00 101.00 Wafer valve lever (PVC) Max Psi 150 150 150 115 115 115 95854 95855 95856 95857 95858 95859 9.0 12.0 16.0 26.0 43.0 30.0 100.00 130.00 165.00 285.00 430.00 699.00 Wafer valve gear (PVC) Lightweight Highly Resistant to Corrosion Repairable EPDM Seal Max Psi 150 115 115 115 95860 95861 95862 95863 11.0 15.0 31.0 38.0 436.00 535.00 665.00 1070.00 Fittings Lightweight Highly Resistant to Corrosion Repairable EPDM Seal

Page 126 Wafer Butterfly Valves Wafer valve lever Ductile iron disc 21/ * * * 97495 97496 97497 97501 97502 97503 97504 97505 97506 8.6 9.0 11.5 12.9 26.0 17.0 32.4 48.0 76.0 55.00 62.00 67.00 89.00 120.00 129.00 169.00 260.00 400.00 Max 160 psi * Due to torque on the internal shaft, and Lever operated valves may not close 100%. For perfect water shut off, on these sizes, order the Gear operated valves listed below. Stainless steel disc 21/ * * * 81351 81352 81353 62050 62055 62051 62052 62053 62054 8.6 9.0 11.5 12.9 26.0 17.0 32.4 48.0 76.0 70.00 79.00 85.00 85.00 139.00 169.00 295.00 489.00 625.00 Wafer valve gear Ductile iron disc 21/ 1 1 1 20" 2 30" 3 97498 97499 97500 97507 97508 97509 97510 97511 97512 97513 97514 97515 97516 97517 97649 97650 17.0 18.0 18.0 21.0 25.0 31.3 41.5 68.0 100.0 134.0 190.0 240.0 395.0 525.0 110.00 113.00 115.00 119.00 160.00 169.00 210.00 275.00 375.00 779.00 1,285.00 1,500.00 1,800.00 2,700.00 7,250.00 10,500.00 Max 160 psi Features: Perfect Shut Off liquid and gas in both directions Economic Alternatives to gate, ball and plug valves Stainless steel disc 21/ 1 1 1 20" 2 81354 81355 81356 62056 62057 62058 62059 62060 62061 81205 81206 81207 81208 81209 Corrosion Free Stems and body are not in contact with the line media. Bodies are protected with epoxy coating. No Flange Gaskets for installation Self centering disc by axial movement due to the floating coupling Compact light weight wafer design (Flangeless Lug and USection) Anti Blow Out Stem The upper stem is fully retained by the retainer plate under pressure in unlikely event of primary seal fail. Easy replaceable seat without any special tools Easy installation for each type of actuators; manual, pneumatic, hydraulic and electric Wide range of material for various conditions Maintenance Free Minimal flow loss and turbulence Reliable for flow control Self Cleaning 17.0 18.0 18.0 21.0 25.0 31.3 41.5 68.0 100.0 122.0 190.0 240.0 395.0 525.0 119.00 125.00 145.00 189.00 235.00 205.00 345.00 525.00 685.00 1,210.00 1,625.00 2,789.00 3,750.00 6,495.00

Page 127 Wafer Butterfly Valves Wafer valve w/ext Gear Ductile iron disc Valve Size 1 1 1 1 1 1 1 1 1 1 Extension Length 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 69882 69883 69884 69885 69886 81380 81381 81382 81383 81384 81385 81386 81387 81388 81389 81390 81391 81392 81393 81394 81395 81396 81397 81398 81399 97375 97376 97377 97378 97379 97380 97381 97382 97383 97384 29.0 32.0 35.0 38.0 41.0 45.0 48.0 51.0 55.0 59.0 55.0 58.0 61.0 65.0 69.0 75.0 78.0 81.0 85.0 89.0 87.0 90.0 93.0 97.0 101.0 153.4 158.9 164.4 169.9 175.2 212.5 219.6 226.4 233.5 240.3 260.00 280.00 300.00 320.00 340.00 310.00 315.00 340.00 365.00 390.00 465.00 485.00 505.00 525.00 545.00 555.00 575.00 595.00 615.00 635.00 750.00 775.00 800.00 825.00 850.00 1025.00 1050.00 1,075.00 1,100.00 1,125.00 1,830.00 1,875.00 1,920.00 1,965.00 2,010.00 Stainless steel disc *, 21/,, and, 1, 20" and 2 Valves w/extensions are also available. * Measurements are from center of valve to top. * for taller extensions, such as 9. Valve Size Extension Length 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 2 3 4 60" 7 97360 97361 97362 97363 97364 97365 97366 97367 97368 97369 97370 97371 97372 97373 97374 97350 97351 97352 97353 97354 97355 97356 97357 97358 97359 31.6 35.1 38.4 41.8 45.1 39.4 43.1 46.7 50.4 53.9 61.7 65.7 69.6 73.8 77.8 76.0 80.7 85.1 89.7 94.3 131.4 136.9 142.4 147.9 153.2 290.00 310.00 330.00 350.00 370.00 410.00 430.00 450.00 480.00 500.00 625.00 640.00 655.00 675.00 690.00 870.00 890.00 910.00 930.00 950.00 1,210.00 1,235.00 1,260.00 1,285.00 1,310.00 Fittings

Page 128 Wafer Butterfly Valves Wafer valve sq nut (Stainless steel disc) 21/ 69630 69631 69632 69633 69634 69635 69636 69637 69638 17.0 18.0 18.0 22.0 26.0 37.0 44.0 62.0 77.0 325.00 337.00 360.00 385.00 435.00 510.00 620.00 835.00 1,050.00 Wafer Valve Electric Ductile iron disc 21/ 97474 97475 97476 97477 97478 97479 97480 97481 97482 32.0 33.0 33.0 39.0 42.0 59.0 68.0 90.0 105.0 1,045.00 1,055.00 1,260.00 1,500.00 1,530.00 1,890.00 2,380.00 2,350.00 3,325.00 110/120 volt (call for 24 volt DC & 50 hz) EPDM seat Epoxy coated cast iron body Stainless steel disc 21/ 68082 68083 68084 68085 68086 68087 68088 68089 68090 32.0 33.0 33.0 39.0 42.0 59.0 68.0 90.0 105.0 1,070.00 1,090.00 1,100.00 1,560.00 1,580.00 2,795.00 2,900.00 3,050.00 3,250.00 Lever handle Wafer Valve / 97779 * Specify make of valve when ordering / 97780 97781 97782 97783 97784 Index Plate Wafer Valve / 97785 // // 97786 97787 19.00 21.00 23.00 28.00 31.00 31.00 4.00 10.00 7.00 * Specify make of valve when ordering Hand Wheel Wafer Valve / 97788 BFV0211 List Prices / /1 97789 97790 97791 97792 97793 70.00 70.00 70.00 110.00 110.00 135.00 * Specify make of valve when ordering Gearbox with Wheel Wafer Valve Replacement GearOP / 97820 70.00 Size 97821 Price 70.00 Part / Number IN LB 97822 List 110.00 97823 110.00 2 3 0945160G020 13.2 97824$92.00 110.00 /1 97825 135.00 4 0945160G040 13.2 $92.00 * Specify make of valve when ordering 5 6 0945160G050 13.2 $92.00 Schumacher Irrigation, Inc. Phone: 4022463685 8 0945160G080 or 800246368518.7 $143.00 Fax: 4022462072 10 0945160G100 18.7 Prices $143.00 effective January 1, 2014 12 14 0945160G120 39.7 $173.00

Page 129 Valves & Accessories Alfalfa Valve Stub (for PIP PVC Pipe) * 62102 62103 62104 62105 19.0 29.0 40.0 55.0 198.00 230.00 290.00 310.00 * Solid Arch * Spigot for PIP PVC Pipe Universal Hydrant x x x x 62106 62107 62108 62109 16.0 23.0 32.0 34.0 505.00 610.00 710.00 815.00 for other sizes. Threaded Stem gate Valve (Brass) * Comes in easy to assembly 4 piece construction with high tensile hexagonal bolts and nylock nuts * Works as an operating device in the slurry industry, ideal for usage in confined spaces. Flanged Stem gate Valve (Brass) * Comes in easy to assembly 4 piece construction with high tensile hexagonal bolts and nylock nuts * Works as an operating device in the slurry industry, ideal for usage in confined spaces. Threaded* Threaded* 4Bolt Flange* 4Bolt Flange* 4Bolt Flange* 69890 69891 95472 95473 95474 Max PSI 45 37 Max PSI 45 37 22 20.9 26.9 19.4 23.4 46.4 320.00 479.00 * Includes Handle * Option: Stainless Steel disc valves can take up to 60psi on,, & Valves 395.00 475.00 885.00 * Includes two ORing Gaskets * Includes Handle * Option: Stainless Steel disc valves can take up to 60psi on,, & Valves ORing Gasket, 96970 4.00 96971 6.00 Handle stem gate valve 96972 96973 96974 6.4 25.00 29.00 48.00 Fittings Threaded lever gate valve (Brass) 97702 97703 97704 97705 Max PSI 45 45 45 22 4.0 9.0 15.0 27.0 95.00 169.00 249.00 470.00

Page 130 Low Pressure Valves Low Pressure Valve (Aluminum) 61460 61461 61462 68028 10.0 15.0 20.0 210.00 275.00 350.00 515.00 45 psi max pressure Low Pressure End Tee Valve (Aluminum) 61301 21.0 485.00 61302 27.0 590.00 61303 34.0 675.00 Low Pressure Valve (PVC) 61356 61357 61358 61359 198.00 219.00 249.00 295.00 Low Pressure Valve Kit 61473 61474 61475 9.9 135.00 155.00 169.00 * Instructions included Rubber Molded disc (For low Pressure valve) 61013 61014 61367 4.0 6.2 29.00 61.00 81.00 Rubber washer (For low Pressure valve) 5/ 61015 1.00

Page 131 Valves Surge Gate Valve 61505 61506 61507 39.0 46.0 58.0 Swing Check Valve fpt (Brass) Female Threaded 81330 7.3 141.00 Ringlock Check Valve 61470 61471 61472 35.9 55.0 79.9 510.00 595.00 795.00 Check valve weld on (Black steel) 61463 61464 61465 61466 61467 61468 12.0 15.0 16.2 28.2 41.6 170.00 198.00 195.00 235.00 289.00 510.00 Fittings *Galvanized or Epoxycoated available at a nominal charge. Check valve weld on (Cast aluminum) 69682 69683 69684 69685 69686 5.1 6.9 9.3 14.5 19.7 175.00 185.00 220.00 285.00 295.00

Page 132 Check Valves Flanged check valve (Galvanized steel) 1 1 20" 2 2 61710 61711 61712 61713 61714 69751 81346 81347 81348 81349 81350 27.0 29.0 34.1 56.6 73.0 140.0 220.0 325.0 400.0 638.0 260.00 280.00 330.00 390.00 475.00 1,015.00 3,515.00 4,539.00 6,510.00 7,785.00 Flanged check valve (Cast aluminum) 69687 69688 69689 69690 69691 13.5 17.3 21.9 30.6 44.3 335.00 370.00 395.00 530.00 650.00 Wafer Check Valve (Cast iron) Ductile iron disc 2 1/ 1 1 20" 2 97483 97484 97489 97490 97491 97492 97493 97494 97485 97486 97487 97488 3.0 4.0 4.6 8.2 18.0 32.0 53.4 75.5 200.0 400.0 500.0 105.00 115.00 100.00 110.00 185.00 310.00 425.00 575.00 1,395.00 1,160.00 1,290.00 1,920.00 Stainless steel disc 2 1/ 1 1 20" 2 81400 81401 61770 61771 61772 61773 61774 61775 81402 81403 81404 81405 3.0 4.0 4.6 8.2 18.0 32.0 53.4 75.5 200.0 300.0 400.0 500.0 125.00 152.00 165.00 215.00 370.00 530.00 755.00 1,010.00 2,150.00 3,700.00 4,495.00 6,049.00

Page 133 Combo Valves Weld on Combo Valve (Galvanized steel) 61480 61481 61482 61483 61700 18.0 25.0 55.0 77.0 108.0 350.00 445.00 575.00 775.00 940.00 130 maximum psi Hook style Combo Valve (Galvanized steel) 61477 61478 61479 61493 16.0 18.0 26.0 65.0 415.00 443.00 546.00 700.00 130 maximum psi Ringlock combo valve (Galvanized steel) 61476 61484 61485 61486 61701 17.0 27.0 58.0 88.0 120.0 382.00 470.00 625.00 876.00 1,005.00 130 maximum psi Flange combo valve (Galvanized steel) 61487 61488 61489 61702 47.0 85.0 113.0 166.0 605.00 820.00 950.00 1,435.00 130 maximum psi Combo Valve Parts Disc: Packing Ring Set: 2pieces /set 2pieces /set 97770 61490 61491 61492 97771 96815 96816 5.3 7.8 9.8 47.00 62.00 110.00 152.00 165.00 8.50 8.50 Fittings Packing Nut: 97768 97769 9.00 17.00 Handle: 97764 97765 97766 97767 59.00 65.00 85.00 88.00 Hinge Pin: 97772 97773 97774 97775 8.00 9.00 17.00 18.00

Page 134 Inline Valve Ringlock inline valve (Galvanized steel) 61440 61441 61442 19.0 29.0 43.0 295.00 418.00 573.00 150 max. psi on,, & valves 80 max psi on valves Hook style inline valve (Galvanized steel) 61450 61458 61451 61452 61459 14.0 15.8 24.0 35.0 41.0 255.00 292.00 315.00 428.00 645.00 150 max. psi on,, & valves 80 max psi on valves Weldon inline valve (Galvanized steel) 61453 61454 61455 61456 61457 12.0 13.5 20.0 31.0 36.0 215.00 240.00 261.00 332.00 469.00 150 max. psi on,, & valves 80 max psi on valves Hook style inline valve tee (Galvanized steel) 61443 61444 61445 61446 26.0 33.0 47.0 56.0 310.00 678.00 659.00 1,070.00 *Also available in Ringlock *Also available in Line Valve Tees. 150 max. psi on,, & valves 80 max psi on valves

Page 135 Valve Parts Disc Item # 1 61495 1 61496 1 61497 1 61498 1 61499 2.3 4.1 5.0 24.00 38.00 38.00 61.00 122.00 Shaft 2 2 2 2 2 64250 64251 64252 64253 64254 24.00 29.00 38.00 40.00 47.00 Hex Bolt(req 2, 3 for ) 3 3 3 64255 64256 64257 1.25 2.20 2.20 Washer (Reg 2) 4 4 64258 64259 0.80 0.45 Hex Nut (Req 2) 5 5 64260 64261 0.70 0.85 Chevron Gasket (Req 2) 6 6 64262 64263 2.40 2.70 Washer Reducer (Req 2) 7 7 64264 64265 0.70 1.00 Retainer Ring (Req 4) 8 8 64266 64267 1.70 2.00 Arm Linkage (req 2) Crank Assembly (includes 10, 17, 18, 19, 20) Washer, Star Jam Nut Ferrule SS Hex Bolt, Eg. Washer SAE Hex Nut, 3/ Collar (req 2) Roll Pin (req 2) Stem & Handle Thrust Nut Yoke 9 11 12 13 14 15 16 17 18 10 19 20 64268 64269 64270 64271 64272 64273 64274 64275 64276 64277 64278 64279 64280 0.2 0.1 0.4 2.50 57.60 0.70 0.70 0.70 0.40 0.35 0.20 6.40 1.10 30.50 11.50 8.10 Plate & Spring Assembly Bolt Spacing Center to center Springs Only Bolt Spacing 11/ 21/ 21/ 21/ 25/3 21/ 31/ 31/ 31/ 41/ 41/ 41/ 41/ 61736 61738 96916 61737 96917 61733 61500 95425 61501 61731 95427 61735 61502 97660 97661 97550 97551 97619 97552 3.4 5.0 5.0 10.0 4.1 14.0 6.8 14.0 209.00 175.00 101.00 262.00 112.00 240.00 212.00 195.00 289.00 256.00 269.00 199.00 199.00 315.00 310.00 8.00 12.00 12.00 12.00 Fittings

Page 136 Chemigation Valves Fertilizer Accessories Ringlock chemigation valve (Galvanized steel) 96826 61401 61402 61403 96829 47.2 75.0 100.7 140.9 184.8 491.00 699.00 809.00 1,089.00 1,615.00 Includes: ARV, 3/ nuts & bolts, flange gaskets Flange x coupler chemigation valve (Galvanized steel) 96824 61360 61361 61362 96827 38.8 63.0 83.3 118.8 142.7 421.00 607.00 697.00 927.00 1,449.00 Includes: ARV, 3/ nuts & bolts, flange gaskets Flanged chemigation valve (Galvanized steel) 96825 61370 61371 61372 96828 30.4 46.0 61.0 86.0 100.5 349.00 515.00 585.00 765.00 1,195.00 Includes: ARV, & flange gaskets Flange Adapters (Galvanized steel) Flange x FRL Flange x FRL Flange x FRL Flange x FRL Flange x FRL 96830 66450 66451 66449 66448 8.6 12.1 17.4 22.1 32.0 59.00 70.00 90.00 118.00 166.00 Flange x MRL Flange x MRL Flange x MRL Flange x MRL Flange x MRL 96831 66459 66549 66458 66457 8.6 12.1 17.4 22.1 32.0 57.00 70.00 90.00 118.00 166.00 Injection valve (pvcmister mist'r) 61523 0.1 55.00 * 3/ Male Pipe Thread *15 psi release is standard (optional 9, 25, 65 or 80 psi available.)

Page 137 Meters Bolton Water Meter OD / PIP OD / PIP OD / PIP OD / PIP OD / PIP Drill Size 51/ 7" GPM 50900 901800 1002250 02700 04000 61930 61931 61932 61933 61934 18.0 22.0 26.0 30.0 34.0 NET 1,029.00 1,076.00 1,143.00 1,220.00 1,285.00 Above include an overrun bearing. State wall thickness & O.D. when ordering. + or 2% Accuracy (12ga =.072,.064) Bolton Water Meter (Reverse Impeller) 81431 81432 81433 81434 81435 14.0 19.0 23.0 26.0 30.0 NET 1,163.00 1,206.00 1,274.00 1,352.00 1,417.00 For Liquid waste manure or other surface water application Above include an overrun bearing. State wall thickness & O.D. when ordering. + or 2% Accuracy (12ga =.072,.064) Threaded Water meter 3/ 1" 11/ 69693 69694 69695 69696 4.3 5.0 11.0 20.0 225.00 355.00 865.00 1,270.00 Included are 2 female thread couplings Water Meter Flow Tube (Aluminum) Ringlock (M x F): RingRing 5' 6.5' 8' 10' 95295 95296 95297 95298 219.00 249.00 295.00 350.00 Fittings Flange x Flange: Flg Flg 5' 6.5' 8' 10' 95299 95300 95301 95302 315.00 350.00 429.00 565.00 Includes straightening vanes for Custom configurations

Page 138 Meters Without Straightening Vanes: Install at least 10 times the diameter downstream from butterfly valves, elbows, cooling coils, tees, reducers, increasers, & other obstructions. With Straightening Vanes: Install at least 5 times the diameter downstream from butterfly valves, elbows, cooling coils, tees, reducers, increasers, & other obstructions. Jetting Flows: Check, Chemigation, and Combo valves create jetting flows inside the pipe that require a straightening vane and meter installation 10 times the diameter down stream from the valve. Reverse Impeller Meters: Reverse Impeller Meters require Bolton Vanes which allows for the passage of grass, debris and other solids. Upstream requirements are the same as listed above. The center of the meter hole has to be two pipe diameters from the end of the pipe to the end of the impeller, plus 16 inches. Example: ( Pipe x 2 diameters = 20") +1 = 3 from end of pipe to center of the meter hole. Straightening Vanes (For water meters) Aluminum, WeldIn OD Pipe Size Steel, WeldIn OD Pipe Size Steel, BoltOn OD Pipe Size (Three per Set) (Stainless Steel) 96868 96869 96870 96867 96877 96878 96879 96876 96873 96874 96875 96871 96872 0.6 29.00 33.00 35.00 39.00 45.00 40.00 45.00 50.00 86.00 95.00 145.00 172.00 179.00 Straightening Vane (Flow straightener) (Stainless steel) OD Pipe Size IPS Pipe Size * Bolton Outside body is NOT included in price. Flow straightener is a coneshaped device that sits upstream from the meter and conditions the fluid to remove flow irregularities prior to measurement. The conditioned flow supports high accuracy flow measurement and virtually eliminates the need for spaceconsuming, costly upstream/downstream straightpipe runs. 96880 96881 96882 96883 96884 96885 NET 319.00 346.00 374.00 NET 319.00 346.00 374.00

Page 139 Center Pivot Parts See us for all of your replacement pivot parts needs such as: pressure regulators, end guns, booster pumps, UJoints, gear boxes, center drives, drops, goosenecks, hose, microswitches, electrical, wheels & tires. Drive coupler Assembly 1" round x 1" square (Old Style Valley, Gifford Hill) 1" round x 7/ square (New Style Valley) 1" round x 3/ square (Gifford Hill, Olson, Lindsay, Electrogator) 1" round w/kw x 3/ square (Old Style Lockwood) 1" round w/kw x 1" square (New Style Lockwood) 1 1/ round x 3/ square 1 1/ round x 1" square (Gifford Hill) 61531 61532 61533 61534 81422 81423 81424 2.5 2.5 2.5 2.5 2.5 2.5 2.5 24.00 24.00 24.00 24.00 24.00 24.00 24.00 Puck Only 20046 Features: 1. Clover leaf style with live rubber insert absorbs shock and reduces wear on driveline components. 2. Casting design holds bolt in place and requires only one wrench to install. 3. Aluminum alloy and five piece design makes this "UJoint" easy to install or remove. No more rust. Universal Drive Coupling (Painted steel) Small Disc, Mini, 3/ to 11/ Large Disk, Regular, 3/ to 1" 97848 97849 28.00 28.00 Features: 1. The rubber disc absorbs shock from gear motors to wheel drive. 2. The ends can be ordered to fit most any center pivot drive line. 3. The round end is split for easy installation and a tight fit. 4. The disc design allows for some misalignment on the drive line. 5. The units are Made in the USA using top materials. Fittings Pivot Drains Quick Drain Lindsay Type, 2075 psi Lindsay Type, 530 psi 21183 21184 Drain Valve Star, Plastic Star, Metal 21182 Plastic Metal

Page 140 Center Pivot Parts Pivot Rubber Boot 4 PLY 2 PLY 6 5/ x 1 long 6 5/ foot 7" x 1 long x long 85/ x 1 long /foot 6 5//foot /foot /foot 7.01" OD 7.01" OD 6.3 OD 7.01" OD 8.4 OD 10.6 OD 61535 69580 21270 21271 21272 69576 69577 69578 69579 3.5 2 2.2 2.9 5.1 38.00/ea 38.70/ft 21.00 25.00 40.00 Pivot Clamp 41/ Stainless Steel Stainless Steel Stainless Steel 6 5/ Stainless Steel 7" Stainless Steel Stainless Steel 85/ Stainless Steel 9" Stainless Steel Stainless Steel 21275 21276 21278 61536 21279 69581 21280 21281 0.5 0.2 11.00 19.00 17.00 Pivot Flange Gasket 59/1 (id x od) 65/ (65/id x od), Lindsay Style 21317 95436 95437 21319 9.00 7.70 Pivot 1 Polyethylene 20" Polyethylene 2 Polyethylene 30" Polyethylene PVC (w/ fpt xfpt) 11" PVC (w/ fpt xfpt) 13.7 PVC (w/ fpt xfpt) 16. PVC (w/ fpt xfpt) 69548 69549 69550 69551 69552 69553 69554 69555 1.0 1.4 1.5 2.0 2.0 2.0 2.5 3.1 4.50 4.50 5.50 6.90 8.10 8.50 6.00 8.00 Ends of pipe are rounded for attractive appearance and functionality Strong UV inhibitors added to weight for longevity Pivot Drop Elbow Single, Steel Galv: 3/, MxF 3/ MxM 66701 21412 7.10 Steel Galvanized Single, PVC: 125 Degree, 3/ FPT x Barb 125 Degree, 3/ FxM 180 Degree, 3/ FPT x Barb 180 Degree, 3/ MXF 180 Degree, 3/ MXM 180 Degree, 3/ MPT xbarb 21086 21088 21418 21417 21419 Double, PVC: 125 Degree, 3/ FPT x Barb 125 Degree, 3/ FxM 21408 PVC, Single PVC, Double U Pipes have radius M x M configuration is available PVC Drop Elbow has strong UV inhibitors for year round use.

Page 141 Center Pivot Parts Drop Riser (Galvanized Steel) 3/ MPT x 3/ FPT Drop Riser (Polyethylene) 3/ MPT x 3/ FPT Strongest clamp on the market, 100% guaranteed. Strong UV inhibitors for year round use. These heavy duty drops are made from top quality polyethylene materials and the heaviest duty clamp on the market. These drops are engineered to withstand tough use conditions and are perfect for use in areas with corrosive water. End gun booster pump (Motor & Pump) Galvanized: 2 30" 3 4 4 5 60" 6 7 7 8 90" 9 10 10 11 120" Poly PVC: 2 30" 3 4 4 5 60" 6 7 7 8 90" 9 10 10 11 120" 2HP, 130 GPM (21/ Suction x Discharge) 21436 21437 21438 21439 21440 21441 21442 21443 21444 21445 21446 21447 21448 21106 All Parts are interchangeable with Berkeley Model #C2MPS With Leeson 2HP (TEFC) 3phase Motor, 460 volt End Gun booster pump (Components) Pivot end gun valve Volute Case Motor Bracket Cast iron Impeller Brass Impeller Stainless Steel Impeller Motor Bracket Gasket Volute Gasket Impeller Spacer Mechanical Seal Motor Only, 2HP, 3Phase, 460V 3/ 1" 90 O 21115 21111 21113 21559 21560 21110 21114 21561 21112 21118 97651 97652 97653 97654 71.00 71.00 115.00 120.00 Fittings * Includes automatic drain and plug.

Page 142 Center Pivot Parts Universal Drive Gear Box (NonTow) 52:1 Gearbox, Valley Style 50:1 Gearbox, Universal 21341 20197 Features 1. HeavyDuty gearbox with universal mounting. 2. Totally enclosed internal air expansion chamber. 3. High tensile strength worm shaft. 4. Most durable worm gear available. 5. Onepiece high strength output shaft. 6. Heavyduty taper roller bearings. 7. Extremeduty ductile iron end caps. 8. New selfcontained cartridge style input and output shaft seals eliminating oil leaks. 9. Plates seal cover for protection of unused input shaft Helical Gear Motors 34 RPM, 50:1, 3/4 HP 43 RPM, 40:1, 3/4 HP 68 RPM, 25:1, 11/2 HP 86 RPM, 20:1, 11/ HP 20206 20205 20204 20203 Features 1. 460/380 Volt, 3 phase motor, 60/50 hz 2. Motor is thermally protected with automatic reset. 3. Class F2 Insulation, UL & CSA Certified. 4. Corrosion resistant finned aluminum motor frame. 5. Aluminum motor frame is sealed at junction points. 6. Integral heattreated pinion gear on motor shaft. Stator Assemblies 3/4 Horse Power 11/2 Horse Power 20207 20208 Features 1. 460/380 Volt, 3 phase motor, 60/50 hz 2. Available in 3/4 and 11/2 HP models 3. Class F insulation. 4. Totally interchangeable with Valmont Stators. 5. Includes the 4 mounting bolts, strain relief and wire nuts. 6. Aluminum motor frame resists corrosion. Pivot Tire, Mach II Tire Only (Fiberglass) 11.2 x 24 97560 For Rim 14.9 x 24 97561 For Rim 14.9 x 24 11.2 x 38 97562 97563 Features 1. Superior Traction 2. Will Not Go Flat 3. Chemical, Fertilizer & UV Resistant 4. Less Stress on Drive Train Components 5. Price Comparable 6. Improved Tire Track Tire & Rim With Rim With Rim With Rim With Rim 11.2 x 24 14.9 x 24 14.9 x 24 11.2 x 38 97564 97565 97566 97567 535.00 599.00 690.00 662.00 785.00 850.00 960.00 1,150.00 76.0 90.0 96.0 96.0 180.0 195.0 205.0 270.0

Page 143 Center Pivot Parts Drive Line Coupling bell ends & drive shaft shields Bell end, Black, 7/ Bell end, Grey, 3/ Cover, Grey, 7/ (Specify Length) Cover, Black, 3/ (Specify Length) 20287 20286 Features 1. Durable, high quality plastic drive coupler shields (bell end) will not crack like the competition, Made in USA 2. Color coded based on the drive shaft size. Black bell end for 3/ and Grey for 7/. 3. Drive shaft shields are also color coded for easy identification. Black for 3/ and Grey for 7/ drive shafts 4. Clamps are not needed to hold the bell ends and shaft covers in place. 5. The units are Made in the USA using top materials. 6. Drive shaft covers are available in custom lengths, please specify. Gearmotor 58:1 ratio, 30 RPM, 1 HP motor 47:1 ratio, 37 RPM, 1 HP motor 39:1 ratio, 45 RPM, 1 HP motor 31:1 ratio, 56 RPM, 11/2 HP motor 21:1 ratio, 84 RPM, 11/2 HP motor 20221 20224 20220 20223 20222 Features 1. 460/380 Volt, 3 Phase, 60/50 hz 2. Special CorroGuard insulation for longer motor life. 3. Stainless steel motor frame for corrosion resistance. 4. Motor is thermally protected. 5. Splined motor/gearbox design. Motor 1 HP, 460/380 Volt, 60/50 hz 11/2 HP, 460/380 Volt, 60/50 hz Features 1. Top quality gear motor from the most experienced American mfg of center pivot gear motors. 2. Designed to operate in extreme environments. The gear motor has a corrosion resistant housing and incorporates an inherit overload protection for the motor. 3. Simplicity, flexibility and reliability. 4. 100% of all motors are factory tested before packaging. Fittings Gear Box 58:1 ratio, 30 RPM 47:1 ratio, 37 RPM 39:1 ratio, 45 RPM 31:1 ratio, 56 RPM 21:1 ratio, 84 RPM 20240 20239 20238 20235 20234 Features 1. Splined design for the motor/gearbox connection. 2. Aluminum gearbox case.

Page 144 Center Pivot Parts Nema C56 Motor 1 HP, 1800 RPM, US Motor 11/2 HP, 1800 RPM, Franklin Motor 20262 20261 Features 1. Fits on any NEMA 56 C flanged center drive gearbox 2. Stainless steel motor frame for corrosion resistance. 3. CorroGuard insulation for longer motor life. 4. Motor is thermally protected Nema C56 Motor, GE Motors 1 HP, 1725 RPM 11/2 HP, 1725 RPM 20258 20259 Features 1. Totally enclosed fan cooled design. 2. Bearings are double sealed and grease packed. 3. Class F insulation. 4. Motor is thermally protected 5. Heavy duty plastic cooling shroud and fan cover are corrosion resistant. Universal nema C56 center drive gearbox 30:1 ratio 40:1 ratio 50:1 ratio 60:1 ratio 20251 20252 20253 Features 1. Universal mounting pattern. 2. Multiple available ratios available. 3. Aluminum gearbox housing. 4. Includes keyway coupling for the motor to gearbox connection. 5. Includes 2 seal savers for the output shafts. 6. High strength aluminum bronze bull gear. Pivot or end tower light kit Rough duty light bulb kit, Complete TOMAR Strobe light kit, Complete 20536 20538 Globe and pendant, 3/ Fem 20549 Globe and pendant, 1/2' Fem 20550 Rough Duty Light, 75 watt 20547 Screw in Strobe Light (Red, Green, Amber, Blue, Clear) 20543 Universal light kit for installation at the pivot point or end tower. The kit comes complete with the flange adapter, extended gooseneck, shielded cable, globe assembly, and rough duty light assembly or TOMAR strobe light.

Page 145 Center Pivot Sprinklers R3000 Rotator R3000 Rotator Complete 21037 26.94 * Indicate 3TN Nozzle Size and Plate type when ordering. * The Orange Plate is considered the corn plate. A3000 Accelerator A3000 Accelerator Complete 21050 17.26 * Indicate 3TN Nozzle Size and Plate type when ordering. D3000 Sprayhead D3000 Sprayhead Complete 21063 5.22 * Indicate 3TN Nozzle Size and Plate type when ordering. iwob TM Standardangle 9groove, Black Deflector Standardangle 6groove, Grey Deflector Lowangle 9groove, Blue Deflector Lowangle 6groove, Blue Deflector Nozzles, Color Coded (#6#24) iwobsa9gup3 iwobsa6gup3 iwobla9gup3 iwobla6gup3 UP3 Nozzles 24.00 24.00 24.00 24.00 1.70 * Indicate UP3 Nozzle Size when ordering. Xiwob TM 6Grooves, 10 o, Blue Deflector 6Grooves, 15 o, Black Deflector 9Grooves, 10 o, Grey Deflector TopofPipe, 6Grooves, 5 o, White Deflector Nozzles, Color Coded (#7#24) XiWob610UP3 XiWob615UP3 XiWob910UP3 XiWob605TOPUP3 UP3 Nozzles 25.30 25.30 25.30 25.30 1.70 Fittings * Indicate UP3 Nozzle Size when ordering. PivotMaster impact sprinkler (6 o ) Single Nozzle 3006H 4006H 5006H 2.40 4.35 gpm 3.80 7.70 gpm 6.20 16.00 gpm Nozzles #89 Nozzles #1012 Nozzles #1318 3006H13/ M PM 4006H13/ M PM 5006H13/ M PM 28.00 28.00 28.00 Double Nozzle 4006H 5006H 4.55 15.08 gpm 12.32 30.47 gpm Nozzles #1012, #712 Nozzles #1318, #718 4006H23/ M PM 5006H23/ M PM 30.50 30.50 * Specify Nozzle Size when ordering. * With Brass Swivel & Stem

Page 146 Center Pivot Regulators Pressure regulator universal flow 3/ Barb x Square Thread PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 10167001 10167002 10167003 10167004 10167005 10167006 10167007 10167008 8.72 8.72 8.72 8.72 8.72 8.72 8.72 8.72 3/ FPT x Square Thread PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 9572001 9572002 9572003 9572004 9572005 9572006 9572007 9572008 9.35 9.35 9.35 9.35 9.35 9.35 9.35 9.35 3/ FPT x FPT PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 9491001 9491002 9491003 9491004 9491005 9491006 9491007 9491008 10.40 10.40 10.40 10.40 10.40 10.40 10.40 10.40 3/ FHT x MHT PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 9561001 9561002 9561003 9561004 9561005 9561006 9561007 9561008 10.60 10.60 10.60 10.60 10.60 10.60 10.60 10.60 3/ FPT x MHT PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 9581001 9581002 9581003 9581004 9581005 9581006 9581007 9581008 10.60 10.60 10.60 10.60 10.60 10.60 10.60 10.60

Page 147 Center Pivot Regulators Pressure regulator HiFlow 3/ FPT x Square Thread PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 9611001 9611002 9611003 9611005 9611006 9611007 9611008 9611009 15.90 15.90 15.90 15.90 15.90 15.90 15.90 15.90 3/ FPT x FPT PSI 6 10 15 20 25 30 40 50 GPM 0.58 0.510 0.512 0.512 0.512 0.512 0.512 0.512 9071001 9071002 9071003 9071005 9071006 9071007 9071008 9071009 16.30 16.30 16.30 16.30 16.30 16.30 16.30 16.30 Pressure Regulator Both ends are Female threaded. Male available upon request. Also available as 1" x 1". Please call for price. 3/ x 3/ 3/ x 3/ 3/ x 3/ 3/ x 3/ 3/ x 3/ 3/ x 3/ 11/ x 1" 11/ x 1" 11/ x 1" 11/ x 1" 11/ x 1" 11/ x 1" 15psi 20psi 25psi 30psi 40psi 50psi 10psi 15psi 20psi 30psi 40psi 50psi 70310 70311 70312 70313 70314 70315 70316 70317 70318 70319 70320 70321 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.6 0.6 0.6 0.6 0.6 13.50 13.50 13.50 13.50 13.50 13.50 28.90 28.90 28.90 28.90 28.90 28.90 Fittings

Page 148 Screens Screen, EZ Square Grid 97316 Bar Grid 97317 2.50 2.50 Features: Stops Nozzle Plugging on Even the Smallest Nozzles, 3/6 Hose Size Self Flushing DesignNever Needs Cleaning Can Be Used on Any System Two Sizes to Accommodate Nozzle Flow Rates Threaded Mounting Inline Screen (Stainless Steel 24 GA.) Size Outside Diameter of inlet of Screen BEBullnose End RERolled End OEOpen End Length Part # 2 2 2 2 18 61513 0.5 39.00 3 3 3 3 18 61514 0.5 39.00 4 4 36 61510BE 1.3 57.00 4 37/8 36 61510RE 1.3 57.00 4 4 36 61510OE 1.3 57.00 5 47/8 36 61515BE 2.0 71.00 5 43/4 36 61515RE 2.0 71.00 5 5 36 61515OE 2.0 71.00 6 53/4 36 61511BE 3.5 84.00 6 55/8 36 61511RE 3.5 84.00 6 6 36 61511OE 3.5 84.00 8 73/4 36 61512BE 5.0 103.00 8 75/8 36 61512RE 5.0 99.00 8 8 36 61512OE 5.0 103.00 10 93/4 36 61469BE 7.0 130.00 10 95/8 36 61469RE 7.0 130.00 10 10 36 61469OE 7.0 130.00 Features: Keeps sprinkler heads from plugging Makes couplers easier to connect and disconnect Works with large volumes of water up to 1000 gallons per minute. Collects large amounts of sand, gravel, and debris without cleaning. *Hole size = 3/3 (.0937). Special order available on smaller.0 hole size. Screen Filter, Galvanized (Flange x Flange) Size GPM 1200 1200 Screen 1/1 3/3 97312 97313 2,385.00 2,385.00 1750 1750 1/1 3/3 97314 97315 3,560.00 3,560.00

Page 149 Accessories Soil Moisture Tester Features: 5 different lengths to choose from Only the gauge is replaceable Conserves water Saves energy from pumping excessive water Irrometer: 1 2 3 4 Service Unit 61504 61508 61509 61516 61517 61518 61519 0.8 1.0 1.1 1.2 1.5 1.7 1.1 121.00 126.00 131.00 136.00 146.00 155.00 89.00 Recommended by the soil conversation departments of the USDA and local water conservation districts as an easy tool to prevent overwatering Optional service kit is required with the first installation of a tensiometer. This unit is not recommended for areas where the instrument could get easily hit or where there are a lot of stones in the soil. Pressure Gauge 21/ & dial faces For Irrigation Water Dry (21/ Dial Face) #030 PSI Dry #0100 PSI Dry #0200 PSI Dry 21/ 69768 61520 61521 0.3 0.3 0.3 7.00 9.00 9.00 Liquid Filled (21/ Dial Face) #015 PSI Liquid Filled #030 PSI Liquid Filled #060 PSI Liquid Filled #0100 PSI Liquid Filled #0160 PSI Liquid Filled #0200 PSI Liquid Filled #0300 PSI Liquid Filled 21/ 69754 69755 69756 69757 61522 69758 69759 0.5 0.5 0.5 0.5 0.5 0.5 0.5 15.00 15.00 15.00 15.00 12.00 15.00 15.00 1/ brass male pipe thread base Stainless steel case Silicone filled gauge (on the liquid filled gauges) Glass lens Pressure Gauge Liquid Manure Liquid Filled ( Dial Face) #015 PSI Liquid Filled #030 PSI Liquid Filled #060 PSI Liquid Filled #0100 PSI Liquid Filled #0160 PSI Liquid Filled #0200 PSI Liquid Filled #0300 PSI Liquid Filled For Liquid Manure (21/ Dial Face): #0160 PSI Dry #0160 PSI Liquid Filled 21/ 95271 95274 95276 95270 95272 95273 95275 61578 69570 1.5 1.5 1.5 1.5 1.2 1.5 1.5 0.5 0.5 32.00 32.00 32.00 32.00 32.00 32.00 32.00 62.00 55.00 Fittings 1/ brass male pipe thread base Stainless steel case Silicone filled gauge (on the liquid filled gauges) Glass lens

Page 150 Valve Stubs Weldon Valve stub (Black steel) 61377 61414 61378 61415 61416 69846 2.0 2.8 3.8 5.8 15.0 19.0 38.00 32.00 60.00 50.00 177.00 220.00 Weldon Valve stub with saddle (Cast aluminum) x x x 7" x x x x 61373 61374 61411 61375 61412 61413 61376 3.5 3.5 3.5 3.5 3.5 3.5 3.5 55.00 55.00 55.00 55.00 55.00 55.00 55.00 Threaded Valve stub (Galvanized steel) FPT x FPT x FPT x FPT x FPT x FPT x 61421 61423 61424 61420 61425 61426 4.0 4.5 5.0 6.0 8.5 28.0 64.00 76.00 74.00 93.00 178.00 379.00 Female Male MPT x MPT x MPT x MPT x MPT x MPT x 61427 61428 61429 61399 61388 61387 4.0 4.5 5.0 6.0 9.0 25.0 65.00 66.00 69.00 77.00 148.00 369.00 Threaded Valve stub (Cast aluminum) FPT x FPT x MPT x MPT x 69612 69614 69613 69615 4.5 5.0 3.0 5.0 71.00 195.00 68.00 245.00 Female Male Weldon Valve stub (Cast aluminum) 61363 61364 61365 61366 3.5 3.5 3.5 4.5 52.00 55.00 81.00 103.00 Weldon saddle (Cast aluminum) Outlet x Pipe x x x x x x x x x x x 7" x x x x x x 61592 61593 61594 61595 61596 61597 61598 61599 61600 61601 61602 61603 61604 61605 61606 61607 61608 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.8 0.8 0.8 0.8 0.8 1.0 0.5 1.0 1.0 10.00 10.00 10.00 10.00 14.50 14.50 14.50 14.50 27.00 27.00 27.00 27.00 27.00 27.00 27.00 54.00 54.00

Page 151 Valve Parts Riser Valve Disc Hole Size 5/ 5/ 5/ 5/ 1" 1" 61404 61405 61409 61406 61410 97546 0.4 0.6 1.0 1.3 2.5 7.50 6.00 15.50 24.00 61.00 80.00 * Domed Riser Valve Stem Disc Size Diameter x Length 5/ x 63/ 5/ x 9" 1" x 11" 1" x 1 61407 61408 61400 97547 0.6 0.7 2.5 8.00 10.50 37.00 55.00 * Zinc Plated For: Flat Discs Stainless Steel Stems Brass Stems 8 Pitch Stems Hex Top Stems VTC Stems RVTC Stems Weldin Spiders Replaceable Spiders Snap Rings Brass Nut Fittings

Page 152 Valve Openers Independent Valve Tees Valve Opener x x x x Cast Alum Cast Alum Steel Gal. Steel Gal. Steel Gal. Cast Alum Cast Alum Cast Alum Steel Gal. 61435 61430 61431 61433 69752 61434 61436 61437 61432 9.0 10.0 15.0 27.0 34.0 8.0 10.0 10.0 14.0 120.00 137.00 207.00 266.00 600.00 119.00 141.00 132.00 178.00 Cast Alum Steel Gal. Also available in Knob style. Gun stand Valve Opener x Cast Alum 61018 13.0 235.00 Cast Alum Valve Opening Tee Cast Alum 61390 x x x x x x x x x x x x x x x x x x Cast Alum Cast Alum Cast Alum Cast Alum Steel Gal. Steel Gal. Steel Gal. Steel Gal. 61391 61392 61393 61394 61395 61396 61397 61398 8.0 9.0 10.0 11.0 11.0 17.0 18.5 20.0 23.0 157.00 158.00 168.00 169.00 189.00 220.00 263.00 367.00 371.00 Also available in Knob style. Valve Opening Parts Roll Pin 5/ and 7/ Yoke only Roll Pin for Yolk *Chevron Gasket 5/ **Chevron Gasket 3/ Chevron Gasket 1" 61438 61439 61240 61241 61243 6.80 0.70 1.00 1.00 2.00 Yoke 3/ *5/ is for Alumax, A&M & Felton. **3/ is for Ames, Alumax, Bush Hog, Irreco, Pierce, ShurRane & Western. Hook style independent valve tee (Aluminum) x x x x 61380 61381 61382 61383 6.3 9.6 11.7 13.6 150.00 169.00 185.00 205.00

Page 153 Nipples, Couplings & Tees Ringlock independent valve tee (Aluminum) x x x 61384 61385 61386 9.0 9.9 11.7 191.00 211.00 240.00 Weldon nipple (Black steel) Black Steel: 1/ 3/ 1" 11/ 11/ 21/ Length 1" 21/ 21/ 95820 61539 61540 61541 61542 61543 61548 61544 61545 61549 61546 61547 69660 69661 0.1 0.4 0.3 0.4 0.6 0.9 1.5 2.8 3.9 5.3 7.3 1.50 2.00 2.75 4.00 6.25 8.00 10.00 13.50 20.00 35.00 40.00 85.00 172.00 210.00 Weldon nipple (Aluminum) 1/ 3/ 1" 11/ 11/ 21/ 95821 61703 61554 61555 61556 61550 61557 61551 61552 61553 61558 61559 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.6 0.9 1.1 1.4 3.0 6.50 6.70 7.50 9.00 13.00 18.50 32.00 24.00 29.00 49.00 71.00 116.00 White Teflon Tape Fittings 1/ x 520" 3/ x 520" 1" x 520" 97543 97544 97545 1.60 2.70 3.40 *Industrial Teflon Thread sealing tape. *Chemically resistant.

Page 154 Nipples, Couplings & Tees Weldon half coupling (Black steel) 1/ 1/ 3/ 1/ 3/ 1" 11/ 11/ 21/ 95879 95016 95279 95278 61586 61669 61587 61588 61571 61589 61572 61573 61574 61575 61576 95154 0.1 0.1 0.1 0.3 0.2 0.3 0.5 1.0 1.4 2.0 3.6 4.9 1.00 1.50 1.70 1.70 1.80 2.50 3.20 4.00 5.50 14.00 10.00 27.00 62.00 77.00 99.00 185.00 Full coupling (Black steel) 1/ 3/ 1/ 3/ 1" 11/ 11/ 21/ 31/ 95847 95872 69571 69572 69573 95870 95869 69574 95871 69575 95873 95874 95875 0.1 0.1 0.2 0.3 0.4 0.5 0.7 1.1 2.1 3.4 4.8 4.6 11.3 1.40 2.60 2.80 3.50 4.90 6.20 7.90 11.30 19.50 27.30 54.00 34.70 106.00 Weldon half coupling (Aluminum) 1/ 1/ 3/ 1" 11/ 11/ 21/ 95303 95304 61740 61609 61585 61580 61581 61417 61582 61583 61584 61418 0.1 0.3 0.3 0.3 0.4 0.5 1.0 1.0 1.4 1.5 1.5 1.6 4.50 6.50 6.70 7.50 10.00 13.00 18.50 32.00 32.00 52.00 99.00 140.00

Page 155 Drain Valves Flapper Drain Gasket 2 3 Flapper Drain Gasket (complete) 1. Splash Nut 2. Rubber Flapper 3. Threaded Insert 4. Jam Nut 61537 61813 61810 61811 61812 0.4 0.1 0.1 0.1 0.1 7.75 2.10 1.75 2.50 1.50 4 1 Mushroom Drain w/clip (Western) 61525 0.1 1.20 * Clip (not pictured) is included Mushroom Drain (Ames) 61526 0.1 1.20 1" Drain Valve Pierce Wade Rain Waterman Pierce Giant Bridge Drain (1" mpt x 3/ male hose thread) (1" mpt) (11/ mpt x 3/ mpt) (1" mpt) #1 #2 #3 #4 81447 61538 81448 97701 0.1 0.4 0.2 13.00 11.00 22.00 10.00 #1 #2 #3 #4 Fittings Pipe Thread Compound 1/2 Pint, 8 Fl. Oz 1 Pint, 16 Fl. Oz 1 Quart, 32 Fl. Oz 97442 97443 97444 10.00 16.00 28.00 1Pint 1Quart 1/2Pint

Page 156 Iron Malleable Fittings (class 150 lbs) Bushing (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/4 X 1/8 97035 0.1 2.30 95479 0.1 3.40 3/8 X 1/8 97210 0.1 2.30 95480 0.1 3.40 3/8 X 1/4 97222 0.1 2.30 95481 0.1 3.40 1/2 X 1/8 97015 0.1 2.30 95482 0.1 3.40 1/2 X 1/4 97013 0.1 2.30 95483 0.1 3.40 1/2 X 3/8 97016 0.1 2.30 95484 0.1 3.40 3/4 X 1/8 97186 0.2 2.30 95485 0.2 3.90 3/4 X 1/4 97199 0.1 2.30 95486 0.1 3.50 3/4 X 3/8 97200 0.1 2.30 95487 0.1 3.90 3/4 x1/2 97261 0.1 2.10 81214 0.1 3.10 1 X 1/4 96984 0.2 2.80 95489 0.2 4.10 1 X 3/8 96987 0.2 2.90 95490 0.2 6.50 1 x1/2 97250 0.2 2.20 81215 0.2 3.80 1 x3/4 97251 0.2 2.20 81216 0.2 3.50 11/4 X 1/4 97084 0.3 3.70 95493 0.3 5.90 11/4 X 3/8 97085 0.3 3.30 95494 0.3 5.90 1 1/4 X1/2 97098 0.3 3.10 95495 0.3 5.20 1 1/4 X3/4 97101 0.4 2.80 95496 0.4 4.80 11/4 x1 97254 0.3 2.80 81217 0.3 4.80 11/2 X 1/4 97048 0.4 4.30 95498 0.4 7.50 11/2 X 3/8 97049 0.2 4.20 95499 0.4 7.50 1 1/2 X1/2 97062 0.4 3.50 95500 0.4 6.90 1 1/2 X3/4 97065 0.4 3.50 95501 0.4 6.90 11/2 x1 97252 0.4 3.10 81218 0.4 6.20 11/2 x11/4 97253 0.3 3.60 81219 0.3 5.70 2 X1/4 97144 0.2 7.00 95504 0.5 8.70 2 X 3/8 97128 0.2 5.30 95505 0.2 8.70 2 X1/2 97143 0.5 5.30 95506 0.5 8.60 2 X3/4 97147 0.6 4.50 95507 0.6 8.00 2 x1 97255 4.20 81220 0.6 7.50 2 x11/4 97257 0.7 4.20 81221 0.7 7.50 2 x11/2 97256 0.6 4.70 81222 0.6 6.70 21/2 X 1/2 97150 7.70 95511 12.40 21/2 X 3/4 97157 1.0 7.70 95512 1.0 12.40 21/2 X 1 97148 1.0 7.70 95513 1.0 12.40 21/2 X 11/4 97153 1.0 7.70 95514 1.0 12.40 21/2 X 11/2 97151 1.1 7.20 95515 1.1 15.20 21/2 x2 97258 0.9 7.10 81223 0.9 10.80 3 X 1/2 97182 1.1 12.50 95517 1.1 28.00 3 X 1 97180 1.4 10.70 95518 1.4 16.40 3 X 11/4 97184 1.5 10.70 95519 1.5 16.50 3 X 11/2 97183 1.6 10.40 95520 1.6 16.00 3 x2 97259 1.9 9.80 81224 1.9 14.60 3 x21/2 97260 1.8 9.90 81225 1.8 15.50 31/2 x3 97319 12.00 95962 2 25.20 4 X 1 97234 1.3 20.20 95523 2.6 34.00 4 X 11/4 97236 1.2 20.20 95524 2.7 34.00 4 X 11/2 97235 1.2 20.20 95525 2.8 21.00 4 X 2 97237 2.6 19.30 95526 2.6 30.50 4 X 21/2 97238 3 19.30 95527 3 34.50 4 x3 97262 1.7 19.30 61760 2.8 32.00 6 x2 97320 37.00 95963 6.2 57.80 6 x3 97321 37.00 95964 6.6 59.60 6 x4 97322 37.00 95965 6.8 58.40

Page 157 Iron Malleable Fittings (class 150 lbs) 45 o elbow (Black or galvanized steel) Class 150 Pounds 90 o elbow (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/8 97038 0.1 2.60 95579 0.1 3.60 1/4 97024 0.1 2.70 95580 0.1 3.80 3/8 97212 0.1 2.40 95581 0.1 3.20 1/2 97264 0.2 2.10 81227 0.2 2.50 3/4 97270 0.3 2.60 81228 0.3 3.50 1 97263 0.5 3.30 81229 0.3 4.00 11/4 97266 0.8 5.80 81230 0.8 7.20 11/2 97265 1.0 7.10 81231 1.0 8.60 2 97297 2.4 14.50 81232 1.6 12.80 21/2 97268 2.9 30.30 81233 2.9 43.20 3 97269 4.2 39.30 81234 4.2 63.00 4 97271 7.0 76.40 81235 7.0 105.00 6 97241 16.5 199.20 95591 16.5 240.00 Black Galvanized 1/8 97042 0.1 1.80 95566 0.1 2.50 1/4 97028 0.1 1.70 95567 0.1 2.50 3/8 97216 0.2 1.70 95568 0.2 2.50 1/2 97273 0.2 1.30 81237 0.2 1.60 3/4 97276 0.4 1.60 81238 0.4 1.90 1 97272 0.6 2.80 81239 0.6 3.60 11/4 97275 0.9 4.50 81240 0.9 5.50 11/2 97274 1.1 5.90 81241 1.1 7.20 2 97247 1.8 10.10 61761 1.8 12.00 21/2 97323 14.00 61762 3.4 30.00 3 97248 5.0 32.70 61763 5.0 51.00 4 97249 8.9 69.60 61764 8.9 87.00 6 97244 20.7 230.80 95578 20.7 327.00 Tee (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/8 97042 0.1 1.80 95776 0.1 3.60 1/4 97033 0.1 2.60 95777 0.1 3.10 3/8 97220 0.2 2.60 95778 0.2 3.10 1/2 97294 0.3 1.70 81243 0.3 2.00 3/4 97300 0.5 2.40 81244 0.5 3.20 1 97293 0.8 4.20 81245 0.8 5.30 11/4 97296 1.2 6.90 81246 1.2 8.30 11/2 97295 1.6 8.60 81247 1.6 10.50 2 97297 2.4 14.50 81248 2.4 17.50 21/2 97298 4.5 29.90 81249 4.5 46.50 3 97299 6.5 44.90 81250 6.5 54.50 4 97301 11.3 105.40 81251 11.3 129.00 6 97246 27.0 230.50 95788 27.0 265.30 Fittings Locknut (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/4 97029 2.10 95598 1.40 1/2 97008 1.70 95599 0.1 1.80 3/4 97193 0.1 1.90 95600 0.1 2.10 1 96995 0.1 3.50 95601 0.1 4.00 11/4 97092 0.1 2.90 95602 0.2 3.70 11/2 97056 0.2 4.10 95603 0.3 4.80 2 97134 0.3 6.50 95604 0.4 8.50 21/2 97161 11.50 95605 19.50

Page 158 Iron Malleable Fittings (class 150 lbs) Class 150 Pounds Reducing coupling (Black or galvanized steel) Black Galvanized 1/4 X 1/8 97036 0.1 1.90 95619 0.1 2.60 3/8 X 1/8 97211 0.1 2.10 95620 0.1 2.70 3/8 x1/4 97289 0.1 2.10 81253 0.1 2.60 3/8 x1/2 97288 0.1 1.80 81254 0.1 2.50 1/2 X 1/8 97002 0.1 2.10 95622 0.1 3.00 1/2 X 1/4 97014 0.1 1.90 95623 0.1 2.40 1/2 X 3/8 97017 0.1 1.80 95624 0.1 2.30 3/4 X 1/8 97187 0.2 2.40 95625 0.2 3.00 3/4 X 1/4 97185 0.2 2.40 95626 0.2 3.00 3/4 X 3/8 97201 0.2 2.40 95627 0.2 3.00 3/4 X 1/2 97324 1.50 95959 0.2 2.60 1 X 1/4 96985 0.3 3.70 95629 0.3 5.20 1 X 3/8 96988 0.3 3.70 95630 0.3 5.20 1 x1/2 97277 0.3 3.20 81256 0.3 4.50 1 x3/4 97278 0.4 3.20 81255 0.4 4.00 11/4 X 3/8 97086 5.40 95633 0.5 7.30 1 1/4 X 1/2 97097 0.5 4.60 95634 0.5 6.80 1 1/4 X3/4 97103 0.5 4.00 95635 0.5 5.50 11/4 x1 97281 0.6 4.00 81257 0.6 5.50 11/2 X 3/8 97050 5.60 95637 0.6 7.80 1 1/2 X 1/2 97061 0.6 5.90 95638 0.6 8.00 1 1/2 X3/4 97067 0.7 6.60 95639 0.7 7.10 11/2 x1 97279 0.8 5.90 81258 0.8 7.10 11/2 x11/4 97280 0.8 5.10 81259 0.8 6.70 2 X 1/2 97139 1.0 9.60 95642 1.0 11.60 2 X 3/4 97141 1.0 8.50 95643 1.0 11.60 2 x1 97282 1.0 8.00 81260 1.0 10.00 2 x11/4 97284 1.1 8.50 81261 1.1 10.20 2 x11/2 97283 1.2 7.40 81262 1.2 9.70 21/2 X 1 97149 20.50 95960 1.8 29.80 21/2 X 11/4 97154 1.8 21.50 95648 1.8 30.00 21/2 X 11/2 97152 1.9 22.00 95649 1.9 31.00 21/2 x2 97285 2.1 18.90 81263 2.1 30.00 3 x 1 97181 2.5 30.00 95651 2.5 31.00 3 X 11/4 97325 22.00 95961 2.6 40.40 3 x11/2 97171 2.7 29.40 95652 2.7 40.00 3 x2 97286 2.8 24.40 81264 2.8 38.00 3 x21/2 97287 3.1 29.40 81265 3.1 40.00 4 x2 97290 4.3 59.00 81266 4.3 86.00 4 x21/2 97291 4.8 59.00 81267 4.8 86.00 4 x3 97292 5.4 59.00 81268 5.4 86.00 6 x3 97239 9.4 130.90 95658 9.4 175.00 6 x4 97240 10.0 130.90 95659 10.0 155.00 Coupling (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/8 97040 0.1 2.60 95529 0.1 3.00 1/4 97026 0.1 2.20 95530 0.1 2.80 3/8 97214 0.1 2.20 95531 0.1 2.80 1/2 97006 0.2 1.80 95532 0.2 2.30 3/4 97191 0.3 2.10 95533 0.3 2.60 1 96993 0.4 3.10 95534 0.4 4.30 1 1/4 97089 0.7 4.00 95535 0.7 5.90 1 1/2 97053 0.9 5.40 95536 0.9 6.70 2 97131 1.3 7.80 95537 1.3 9.70 21/2 97159 2.3 21.40 95538 2.3 30.00 3 97176 3.4 28.90 95539 3.4 39.50 4 97229 5.6 57.60 95540 5.6 84.00 6 97243 136.90 95541 11.8 194.00

Page 159 Iron Malleable Fittings (class 150 lbs) 90 o reducing elbow (Black or galvanized steel) Class 150 Pounds 90 o street elbow (Black or galvanized steel) Class 150 Pounds 45 o street elbow (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/4X1/8 97037 0.1 3.40 95660 0.1 4.00 3/8X1/4 97223 0.1 2.50 95661 0.1 3.60 1/2X1/4 97023 0.2 2.40 95662 0.2 3.00 1/2 X 3/8 97018 0.2 2.40 95663 0.2 2.80 3/4X1/4 97204 0.2 3.30 95664 0.2 4.30 3/4X3/8 97209 0.3 3.30 95665 0.3 4.30 3/4 X 1/2 97198 0.2 2.50 95666 0.3 3.20 1 X 3/8 96989 0.2 5.10 95667 0.4 6.60 1 X 1/2 97000 0.4 3.30 95668 0.4 4.40 1 X 3/4 97001 0.5 3.70 95669 0.5 4.10 11/4 x1/2 97099 0.6 6.80 95670 0.6 8.40 11/4 x3/4 97102 0.6 5.80 95671 0.6 8.30 11/4 x 1 97096 0.8 5.10 95672 0.8 6.90 11/2 x1/2 97063 0.7 8.60 95673 0.7 10.80 11/2 x3/4 97066 0.7 8.40 95674 0.7 10.60 11/2 x 1 97060 0.9 8.40 95675 0.9 10.60 11/2 x11/4 97064 1.1 8.40 95676 1.1 10.60 2 x 1/2 97140 0.9 12.40 95677 0.9 15.00 2 x 3/4 97142 1.1 12.40 95678 1.1 15.00 2 x 1 97138 1.3 12.10 95679 1.3 14.70 2 x11/4 97146 1.4 12.10 95680 1.4 14.70 2 x11/2 97145 1.6 10.60 95681 1.6 12.80 21/2X11/2 97166 2.2 29.70 95682 2.2 46.80 21/2 X 2 97155 2.5 29.20 95683 2.5 41.70 3 X 2 97326 34.00 95943 3.3 65.80 3 X 21/2 97327 34.00 95944 4.1 65.80 4 X 3 97328 59.00 95945 6.7 127.80 Black Galvanized 1/8 97044 0.1 2.60 95751 0.1 3.40 1/4 97031 0.1 2.60 95752 0.1 3.30 3/8 97218 0.1 2.60 95753 0.1 3.30 1/2 97010 0.2 2.70 95754 0.2 3.40 3/4 97195 0.3 2.60 95755 0.3 3.30 1 96997 0.5 3.80 95756 0.5 4.40 1 1/4 97094 0.8 5.80 95757 0.8 7.50 1 1/2 97058 1.1 7.70 95758 1.1 9.20 2 97136 1.8 12.50 95759 1.8 16.00 21/2 97163 3.3 30.80 95760 3.3 43.30 3 97178 4.9 47.00 95761 4.9 65.40 4 97232 9.2 76.60 95762 9.2 107.90 Black Galvanized 1/8 97045 0.1 4.10 95763 0.1 4.70 1/4 97032 0.1 3.00 95764 0.1 4.00 3/8 97219 0.1 3.50 95765 0.1 4.60 1/2 97004 0.2 2.80 95766 0.2 3.50 3/4 97189 0.3 4.30 95767 0.3 5.70 1 96991 0.5 4.90 95768 0.5 7.10 1 1/4 97087 0.7 8.60 95769 0.7 10.60 1 1/2 97051 0.9 10.60 95770 0.9 12.80 2 97129 1.5 17.90 95771 1.5 22.00 21/2 97164 2.6 38.10 95772 2.6 51.80 3 97329 42.00 95941 3.9 77.50 4 97330 79.00 95942 7.0 126.00 Fittings

Page 160 Iron Malleable Fittings (class 150 lbs) Reducing Tee (Black or galvanized steel) Class 150 Pounds L Left, Right, Top Black Galvanized T Part # Part # 3/8x3/8x1/4 97224 3.40 95684 4.50 1/2x1/2x1/4 97020 0.2 2.90 95685 0.1 3.70 1/2x1/2x3/8 97022 0.3 3.60 95686 0.1 4.70 1/2x1/2x3/4 97021 0.4 4.20 95687 0.2 5.10 1/2x1/2x1 97019 0.5 5.40 95688 0.3 7.30 3/4x1/2x1/2 97202 0.4 3.80 95689 0.2 5.10 3/4x1/2x3/4 97203 0.5 4.20 95690 0.2 5.10 3/4x1/2x1 97331 4.00 95949 7.50 3/4x3/4x1/4 97207 0.4 4.10 95691 0.2 4.60 3/4x3/4x3/8 97208 0.4 4.30 95692 0.2 4.60 3/4x3/4x1/2 97206 0.5 3.70 95693 0.2 4.40 3/4x3/4x1 97205 0.6 4.80 95694 0.3 7.30 1x1/2x1/2 97116 0.5 5.40 95695 0.3 7.50 1x1/2x3/4 97117 0.6 6.30 95696 0.3 7.60 1x1/2x1 97115 0.7 5.40 95697 0.4 7.50 1x3/4x1/2 97120 0.6 5.30 95698 0.3 7.60 1x3/4x3/4 97121 0.6 5.00 95699 0.3 7.50 1 x 3/4 x 1 96986 0.7 5.40 95700 0.4 7.50 1 x 1 x 1/4 96982 0.5 5.30 95701 0.3 7.50 1 x 1 x 1/2 96981 0.6 4.70 95702 0.3 6.20 1 x 1 x 3/4 96983 0.7 4.70 95703 0.4 6.20 1x1x11/4 97119 1 8.80 95704 0.5 10.50 1x1x11/2 97118 1.1 13.20 95705 0.6 17.90 1x1x2 97332 13.20 95950 20.00 11/4 x1/2 x11/4 97100 0.9 9.80 95706 0.5 11.70 11/4x3/4x1/2 97113 0.4 9.70 95707 0.4 11.60 11/4 x3/4 x3/4 97105 0.7 9.80 95708 0.4 12.80 11/4 x3/4 x 1 97104 0.5 9.00 95709 0.5 11.70 11/4x3/4x11/4 97114 1 8.90 95710 0.5 11.00 1 1/4x1x1/2 97110 0.4 9.00 95711 0.4 11.50 1 1/4x1x3/4 97112 0.9 8.60 95712 0.4 11.70 11/4 x 1 x 1 97083 1.0 8.60 95713 0.5 11.70 11/4x1x11/4 97111 1.1 10.00 95714 0.6 11.90 11/4x1x11/2 97333 8.50 95951 13.00 R Left, Right Top Black Galvanized Part # Part # 11/4x11/4x3/8 97109 0.4 8.50 95715 0.4 12.20 1 1/4x1 1/4x1/2 97107 0.9 8.60 95716 0.4 10.20 1 1/4x1 1/4x3/4 97108 0.9 7.50 95717 0.5 9.60 1 1/4x1 1/4x1 97106 1.1 7.50 95718 0.6 9.60 11/4x11/4x11/2 97334 8.50 95952 18.10 11/4x11/4x2 97335 13.50 95953 20.00 11/2x1/2x1 97068 0.7 14.90 95719 0.7 17.10 11/2x1/2x11/2 97069 0.7 11.50 95720 0.7 16.00 11/2x3/4x11/2 97082 1.3 11.70 95721 0.7 14.70 11/2x1x3/4 97081 0.6 11.50 95722 0.6 14.50 11/2x1x1 97079 1.1 11.70 95723 0.6 14.70 11/2x1x11/2 97080 1.4 11.70 95724 0.7 14.70 11/2x11/4x1/2 97076 0.6 11.50 95725 0.6 14.50 11/2x11/4x1 97075 1.2 10.00 95726 0.6 14.40 11/2x11/4x11/4 97078 1.3 15.80 95727 0.7 20.60 11/2x11/4x11/2 97077 1.4 15.80 95728 0.7 20.60 1 1/2x1 1/2x1/2 97071 1.1 10.00 95729 0.6 12.60 1 1/2x1 1/2x3/4 97074 1.2 9.50 95730 0.6 11.90 1 1/2x1 1/2x1 97070 1.3 9.50 95731 0.7 11.90 1 1/2x1 1/2x1 1/4 97072 1.4 11.70 95732 0.8 14.70 11/2x11/2x2 97073 1.9 16.20 95733 1.0 18.40 2 x 1/2 x 11/4 97336 13.00 95956 18.40 2 x 1/2 x 2 97124 2 18.20 95734 1.0 20.80 2 x 1 x 1 97122 0.8 18.00 95735 0.8 20.60 2 x 1 x 2 97123 2.1 18.20 95736 1.1 20.80 2x11/4x11/4 97337 13.50 95954 20.80 2x11/2x1 97338 13.00 95955 20.50 2x11/2x11/2 97168 1.9 15.70 95737 1.1 20.20 2 x 2 x 1/2 97127 1.5 14.80 95738 0.9 19.20 2x2x3/4 97170 1.7 14.80 95739 0.9 17.30 2x2x1 97169 1.8 14.80 95740 1.0 17.30 2 x 2 x 1 1/4 97126 2 15.70 95741 1.1 20.20 2 x 2 x 1 1/2 97125 1.1 15.50 95742 1.1 19.90 2 x 2 x 21/2 97339 28.10 95958 54.00 21/2x21/2x1 97167 1.6 37.00 95743 1.6 54.70 21/2 x 21/2 x 2 97156 3.6 38.90 95744 1.8 55.30 3 x 3 x 1/2 97173 1.8 51.40 95745 1.8 90.50 3 x 3 x 1 97172 4.0 52.00 95746 2.0 75.10 3 x 3 x 11/4 97340 38.20 95947 76.50 3x3x11/2 97225 4.5 52.00 95747 2.4 75.10 3 x 3 x 2 97174 5.0 52.00 95748 2.7 75.10 4 x 4 x 1 97341 96.50 95948 160.60 4 x 4 x 2 97226 4.0 105.20 95749 4.0 145.00 4 x 4 x 3 97227 104.00 95750 148.50

Page 161 Iron Malleable Fittings (class 150 lbs) Street tee (Black or galvanized steel) Black Galvanized 1/2 97011 0.2 5.80 95773 0.3 9.10 3/4 97196 0.3 8.20 95774 0.5 12.20 1 96998 0.4 10.50 95775 0.8 15.60 Class 150 Pounds Cross (Black or galvanized steel) Class 150 Pounds Union (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/8 97041 0.1 5.30 95555 0.1 8.00 1/4 97027 0.2 5.30 95556 0.2 8.00 3/8 97215 0.3 5.40 95557 0.3 8.00 1/2 97007 0.4 6.20 95558 0.4 8.00 3/4 97192 0.6 7.50 95559 0.6 10.00 1 96994 0.9 9.30 95560 0.9 13.50 1 1/4 97090 1.5 15.00 95561 1.5 19.50 1 1/2 97054 1.9 18.60 95562 1.9 23.50 2 97132 2.9 30.90 95563 2.9 44.70 21/2 97160 53.80 95564 5.1 84.50 4 97230 163.70 95565 12.6 229.50 Black Galvanized 1/8 97047 0.2 9.40 95789 0.2 11.10 1/4 97034 0.2 8.90 95790 0.2 10.70 3/8 97221 0.3 6.00 95791 0.3 7.10 1/2 97012 0.4 5.80 95792 0.4 7.20 3/4 97197 0.60 6.90 95793 0.6 8.50 1 96999 0.9 9.00 95794 0.9 10.60 1 1/4 97095 1.3 11.90 95795 1.3 14.40 1 1/2 97059 1.8 14.50 95796 1.8 18.50 2 97137 2.6 21.90 95797 2.6 24.70 21/2 97165 3.7 52.80 95798 3.7 68.70 3 97179 4.7 64.20 95799 4.7 97.60 4 97233 8.3 158.60 95800 8.3 211.90 Square Head Plug (Black or galvanized steel) Class 150 Pounds * Bar plugs also available in sizes,, &. Black Galvanized 1/8 97043 0.1 1.10 95606 0.1 1.90 1/4 97030 0.1 1.10 95607 0.1 1.90 3/8 97217 0.1 1.10 95608 0.1 1.90 1/2 97009 0.1 1.20 95609 0.1 2.30 3/4 97194 0.1 1.20 95610 0.1 2.30 1 96996 0.2 1.50 95611 0.2 2.50 1 1/4 97093 0.3 1.90 95612 0.3 3.90 1 1/2 97057 0.4 2.60 95613 0.4 5.20 2 97135 0.6 3.70 95614 0.6 6.70 21/2 97162 1 6.80 95615 1 12.90 3 97177 1.4 9.30 95616 1.4 18.50 4 97231 2.6 19.60 95617 2.6 38.00 6 97245 6.6 52.10 95618 6.6 75.50 Fittings Floor flange (Black or galvanized steel) Class 150 Pounds Black Galvanized 1/2 97003 0.3 4.70 95592 0.3 10.00 3/4 97188 0.5 5.10 95593 0.5 11.20 1 96990 0.6 6.60 95594 0.6 12.30 1 1/4 97091 0.8 7.10 95595 0.8 14.00 1 1/2 97055 1.1 7.70 95596 1.1 17.50 2 97133 1.5 10.00 95597 1.5 23.00

Page 162 Accessories Cap (Black or galvanized steel) Class 150 Pounds Pitot Tube Black Galvanized Part # Part # 1/8 97039 0.1 1.70 95542 0.1 2.20 1/4 97025 0.1 1.70 95543 0.1 2.20 3/8 97213 0.1 1.70 95544 0.1 2.20 1/2 97005 0.1 1.30 95545 0.1 1.70 3/4 97190 0.2 1.80 95546 0.2 2.40 1 96992 0.3 2.10 95547 0.3 2.60 1 1/4 97088 0.4 2.80 95548 0.4 3.80 1 1/2 97052 0.6 3.80 95549 0.6 4.90 2 97130 0.9 4.90 95550 0.9 6.10 21/2 97158 1.5 12.30 95551 1.5 19.50 3 97175 2.2 18.20 95552 2.2 23.50 4 97228 4 28.50 95553 4 47.00 6 97242 9.2 80.10 95554 9.2 151.00 61530 11.00 Plug (Zamac) * Die cast zinc alloy * Will not seize, rust or gall * Precision machined threads to NPT standards * CleanLightweight 1/ 3/ 1" 1 1/ 30371 30372 30370 69699 0.1 0.1 0.1 0.2 1.65 1.75 1.85 2.60 Bell Reducer (Zamac) Female x Female threaded. * Die cast zinc alloy * Will not seize, rust or gall * Precision machined threads to NPT standards * CleanLightweight 3/ x 1/ 1" x 1/ 1" x 3/ 61568 61569 61570 0.2 0.2 0.2 2.50 2.90 2.90 Bushing (Zamac) Male x Female threaded. * Die cast zinc alloy * Will not seize, rust or gall * Precision machined threads to NPT standards * CleanLightweight Sleeve Coupling (Zamac) * Die cast zinc alloy * Will not seize, rust or gall * Precision machined threads to NPT standards * CleanLightweight 3/ x 1/ 1" x 1/ 1" x 3/ 61565 61566 61567 96821 61741 61742 1/ 3/ 1" 0.1 0.2 0.2 0.2 0.2 0.2 2.30 2.70 2.50 2.50 2.30 3.00

Page 163 Sch 40 Black ButtWeld Fittings 90 o elbow SCH 40 (Black steel) Wall Thickness.216.237.280.322.365.375 OD 3.50 4.50 6.62 8.62 10.75 12.75 ID 3.07 4.03 6.06 7.97 10.02 12.00 "A" 4.5 6.0 9.0 12.0 15.0 18.0 95231 95233 95235 95237 95227 95229 4.8 8.9 24.0 47.8 83.4 123.0 16.00 26.00 58.00 110.00 220.00 219.00 Long Radius * Other sizes available. Please. 45 o elbow SCH 40 (Black steel) Wall Thickness.216.237.280.322.365.375 OD 3.50 4.50 6.62 8.62 10.75 12.75 ID 3.07 4.03 6.06 7.97 10.02 12.00 "B" 2.0 2.5 3.75 5.0 6.25 7.5 95230 95232 95234 95236 95226 95228 2.5 4.5 11.7 23.3 40.9 61.4 11.50 21.00 40.00 67.00 115.00 190.00 * Other sizes available. Please. Tee SCH 40 (Black steel) Wall Thickness.216.237.280.322.365.375 OD 3.50 4.50 6.62 8.62 10.75 12.75 ID 3.07 4.03 6.06 7.97 10.02 12.00 "C" 3.38 4.12 5.62 7.0 8.5 10.0 95282 95283 95284 95285 95280 95281 7.2 12.7 33.1 56.5 90.9 136.0 25.00 39.00 79.00 150.00 280.00 396.00 * Other sizes available. Please. Concentric Cone Sch 40 (Black steel) * Other sizes available. Please. x x21/ x21/ x x x x x x x x x "H" 3.5 3.5 4.0 4.0 5.5 5.5 6.0 6.0 7.0 8.0 8.0 8.0 95190 95191 95192 95193 95194 95195 95196 95197 95186 95187 95188 95189 2 2.2 3.2 3.3 7.4 7.6 10.8 12.3 20.7 22.1 32.4 30.5 16.00 16.00 18.00 14.00 32.00 33.00 55.00 40.00 89.00 80.00 99.00 112.00 Fittings Eccentric Cone SCH 40 (Black steel) * Other sizes available. Please. x x21/ x21/ x x x x x x x x x 95218 95219 95220 95221 95222 95223 95224 95225 95214 95215 95216 95217 2 2.2 3.2 3.3 7.4 7.6 10.8 12.3 20.7 22.1 32.4 30.5 25.00 23.00 32.00 24.00 50.00 51.00 89.00 62.00 145.00 85.00 130.00 210.00

Page 164 Labor/Repair Charges Welding (per inch) (Steel or Aluminum) Weld/Inch 4.50/inch Weld Around (Steel or Aluminum) WA2 WA3 WA4 WA5 WA6 WA8 WA10 WA12 WA14 WA15 WA16 WA18 WA20 WA21 WA22 WA24 1 1 1 1 20" 21" 2 2 $17.00 17.00 19.00 21.00 21.00 23.00 27.00 29.00 28.00 28.00 34.00 38.00 42.00 45.00 57.00 51.00 Diagonal Weld Around (Steel or Aluminum) DWA2 DWA3 DWA4 DWA5 DWA6 DWA8 DWA10 DWA12 DWA14 DWA15 DWA16 DWA18 DWA20 DWA21 DWA22 DWA24 1 1 1 1 20" 21" 2 2 25.50 25.50 28.50 31.50 31.50 34.50 40.50 43.50 42.00 42.00 51.00 57.00 63.00 85.50 85.50 76.50 Rout Gate Hole GATE 0.75 Roll Aluminum Pipe End Labor/Hour Delivery Pump repair or any miscellaneous items. Labor Car/pickup without trailer Pickup/diesel with trailer Del Car Del Truck 75.00 1.00/mile, one way 3.00/mile, one way Cut Charge, Steel Cut Charge, Alum CS CA 15.00 15.00 Diagonal Cut, Steel Diagonal Cut, Alum DCS DCA 22.50 22.50

Page 165 CAN'T FIND A GASKET LISTED TO MATCH YOUR PIPE? CALL OR SEND A SAMPLE! MOST LIKELY ANOTHER GASKET WILL INTERCHANGE WITH YOURS! Fittings

Page 166 Gaskets Prices and sizes are on following pages Lindsay 6161_ Pierce 6162_ Gheen 6163_ ( Lindsay same as Gheen) (Same as Tex Flo Roundback) ( Gheen same as Lindsay) (Cozad) A & M 6164_ felton 6165_ ( Felton same as Ravit) Rainway 6166_ Ace Ben gar dragon Flexoseal 6600_ 6606_ 6613_ 6616_ Akron Champion dresser Gheen habco 6605_ 6607_ 6609_ 6617_ Ames ABC Cloudburst 6999_ dresser Naco Ireco ae Ames HiLo Cobb 6601_ 6802_ 6610_ 6618_ commetco farmland SBS Ireco Steelume 6602_ 6608_ 6614_ 6619_ Ames Suction decoto Farmland Green Dot ireco Old Style ault 6603_ 6611_ 6615_ 6620_ Diamond Fiberstrong Mathison Ring Full (Same as Race and Race) 6604_ 6612_ 6681_ 6621_ 6622_

Page 167 Gaskets mcdowell standard 6623_ midwest ring lock 6670_ race & race DEMOUNTABLE Contractor 6632_ 6701_ raincontrol only Shurrane CHEVRON 6641_ Shurrane texflo (Hastings) Square back 6650_ Vermeer Old Style (Same as Vermeer) (Same as shurrain old style) 6624_ 6633_ 6642_ 6651 moorerane rainbo stout New Style wade rain BoltOn (Ireco) For male end of pipe 6625_ 6634_ 6643_ 6683_ moulton 6626_ rainow Stout Old wade rain New Style Oaks 6664_ Oliver 6663_ pacific 6627_ Speed lock new style pacific 6628_ Speed lock old style Pierce Flatback 6635_ 6644_ 6652_ rainforrent Stout Old wade rain foraluminum couplers 6636_ 6682_ 6653_ rainmaker stout Seal Ring webster Econo Lock Trigger Lock 6637_ 6645_ 6655_ 6654_ rainway stout Towline seal Western Round back Old Style 6629_ 6638_ 6646_ 6656_ Pierce Triple Lip strolyte wheel trac ravit Ravit same as Fittings 6678_ 6662_ 6647_ 6657_ Portalum redirain sureflo wyss Seal Ring Standard 6630 6639_ 6648_ 6659_ 6658_ Race & race Shurrane texflo (Hastings) spring McDowell Same as Mathison Ring Drain New Style Round back ABC Same as authentic 6631_ 6640_ 6649_ 6660_ 6661_

Page 168 Gaskets To complete the part number for each gasket size, use the part number in the first column and use the size code for the last digit. Examples: Ace = 66004; A&M = 61640. Size Code: 2 3 4 5 6 7 8 9 0 1 Part # Brand Name Type 2 3 4 5 6 7 8 9 10 12 6164_ A&M $1.20 $1.20 $1.70 $2.00 $2.50 $3.80 $2.80 $3.50 6600_ Ace 3.40 3.30 4.50 5.00 6605_ Akron 5.10 2.20 2.60 10.50 11.50 10.00 6601_ Ames ABC 1.20 1.30 2.30 4.20 7.00 10.50 15.50 6602_ Ames HiLo 4.00 3.40 6.50 4.50 8.50 6.40 8.00 6603_ Ames Suction 28.00 18.10 22.60 6604_ Alut 2.50 2.10 6606_ Ben Gar 2.50 5.00 3.10 4.00 6607_ Champion 1.60 2.00 2.50 3.50 4.50 8.50 6999_ Cloudburst 4.00 4.70 5.60 6802_ Cobb 1.75 2.40 3.20 6608_ Commetco 2.30 2.90 3.30 3.90 6611_ Decoto 2.30 3.70 6612_ Diamond 2.50 3.00 5.00 6.00 6613_ Dragon 2.20 2.60 3.50 4.10 6609_ Dresser Gheen 3.60 4.60 5.60 4.80 73.00 6.00 7.00 33.00 6610_ Dresser Naco 7.50 11.00 17.50 13.00 6614_ Farmland SBS 1.20 1.30 2.00 3.10 3.70 6615_ Farmland Green Dot 1.70 2.60 3.60 5.00 6.00 6165_ Felton (Felton, General Ind) 1.20 1.20 1.50 3.20 2.60 3.50 3.00 3.70 10.00 6681_ Fiberstrong 6.00 8.00 10.00 6616_ FlexOSeal 3.20 3.50 5.00 6.00 9.00 6163_ Gheen (Cozad) 1.60 1.30 1.70 3.00 3.00 6.10 3.80 4.70 7.50 6617_ Habco 13.00 9.00 6618_ Ireco AE 2.20 2.40 2.80 3.90 6619_ Ireco Steelume 1.50 1.50 2.00 2.30 3.00 2.60 3.60 8.00 6620_ Ireco (Columbus) Old Style 2.25 2.40 2.60 3.50 4.60 12.90 4.80 6.00 6161_ Lindsay 3.20 2.50 3.00 6622_ Mathison Full 21.00 32.00 39.50 37.00 42.00 6621_ Mathison Ring 2.50 6.10 6.50 6.70 7.40 6623_ McDowell 2.30 1.90 2.50 4.30 5.20 13.50 7.60 10.70 6670_ McDowell Ringlock 6.00 8.00 17.00 6624_ Midwest 3.80 2.80 3.20 4.60 8.50 6625_ MooreRain 1.90 2.40 3.50 4.50 6.20 5.50 6.80 11.00 6626_ Moulton 2.70 2.90 3.80 4.50 5.90 8.90 9.50 11.50 6664_ Oaks #N/A. 3.15 3.50 3.70 6663_ Oliver 1.75 2.40 2.80 3.60 4.30 6627_ Pacific Speedlock New Style 2.00 2.30 2.60 6628_ Pacific Speedlock Old Style 2.30 2.80 3.10 4.00 4.60 9.10 6629_ Pierce Flatback 1.50 1.50 2.50 3.60 3.60 4.60 7.00 6162_ Pierce Roundback 1.10 1.10 1.60 2.10 2.20 3.70 3.00 6.20 4.20 7.00 6678_ Pierce Triple Lip 1.50 2.00 3.00 6.00 8.00 9.00 6630_ PortAlum 2.00 2.20 2.80 6631_ Race & Race 2.00 2.50 3.00 3.70 4.00 4.50 6.20 6632_ Race & Race Demountable 1.70 2.00 2.50 3.00 4.00 5.50 6701_ Race & Race Contractor 4.50 4.80 5.20 6633_ RainControl (Hardie) 1.60 2.70 3.10 4.00 6.00 6634_ Rainbow #N/A. 3.60 4.20 4.60 7.50 6635_ Rainow 2.00 3.00 6636_ RainforRent Wosco 1.45 1.50 1.60 3.30 3.00 6.20 4.00 4.20 6.80 6637_ Rainmaker 1.80 2.10 2.30 3.30 4.50 6638_ Rainway Roundback 3.00 1.90 6166_ Rainway Squareback 1.40 1.30 1.60 2.10 2.00 3.40 2.50 3.50 6.50 6662_ Ravit 1.70 2.50 2.80 4.20 4.90

Page 169 Gaskets To complete the part number for each gasket size, use the part number in the first column and use the size code for the last digit. Examples: RediRain = 66394; SureFlo = 66480. Size Code: 2 3 4 5 6 7 8 9 0 1 Part # Brand Name Type 2 3 4 5 6 7 8 9 10 12 6639_ RediRain $1.20 $1.30 $1.50 $2.00 $2.70 $3.20 $5.00 $8.20 6640_ ShurRane DrainNew Style 1.40 1.50 2.00 3.30 4.80 6.20 7.00 6641_ ShurRane NonDrain(Chevron) 2.00 2.70 4.50 3.90 6.00 6.60 6.50 6642_ ShurRane Old Style 1.90 2.00 2.60 3.40 4.20 5.70 6643_ Stout New Style 2.00 2.20 2.60 3.30 3.80 6644_ Stout Old Style 3.20 3.50 3.70 4.50 6.00 6682_ Stout Old Style(Alum Cplr) 1.60 1.90 2.50 2.80 3.50 6645_ Stout Seal Ring 1.50 1.70 2.30 3.00 3.50 6646_ Stout (Coover 31/2) Towline Seal 2.30 6647_ Strolyte 2.00 2.20 2.60 3.00 3.60 6648_ SureFlo 2.90 2.40 3.00 4.20 4.30 11.80 16.50 6649_ TexFlo Roundback 4.60 5.50 9.70 7.50 6650_ TexFlo Squareback 1.20 3.50 3.90 5.00 6.50 6.80 6651_ Vermeer 4.00 4.20 4.40 6683_ Wade Rain Bolton 2.80 2.90 4.00 4.10 5.40 6652_ Wade Rain New Style 1.10 1.20 1.90 3.00 3.70 4.90 5.50 8.00 6653_ Wade Rain Old Style 3.00 3.50 4.70 6654_ Webster Trigger Lock 3.40 3.90 4.40 5.20 8.20 8.90 6655_ Webster Econo Lock 2.00 2.40 3.00 4.20 5.50 7.80 10.30 6656_ Western 1.50 1.60 2.00 2.30 2.90 10.50 3.60 6.70 10.00 6657_ Wheel Trac 2.80 3.40 6658_ Wyss Standard 1.70 2.00 2.40 2.90 3.50 6659_ Wyss Seal Ring 1.70 1.90 2.50 3.60 4.00 68008 Wade Rain Poweroll 1.70 68009 Wade Rain Poweroll 4. 2.80 68015 Wade Rain Poweroll 3.30 Odd Gasket Sizes: Part # Brand Size Price 66896 A&M 41/ $4.00 61612 Pierce, Roundback 15/1 1.90 61613 Pierce, Roundback 21/ 1.90 61615 Pierce, Roundback 21/ 1.90 61617 Pierce, Roundback 65/ 4.20 61619 Pierce, Roundback 85/ 22.00 66087 Commetco 21/ 2.70 66197 Irreco, Steelume 51/ 2.60 66371 Rainmaker 11/ 1.00 66727 Gheen, Dresser 41/ 7.00 66728 Gheen, Dresser 65/ 9.00 66729 Gheen, Dresser 85/ 11.00 Wheeline Gaskets Part # Brand Wall Middle to Middle Price 68000 Western, Round 3/1 x 41/ $2.20 68001 Western, WIDE1 3/1 x 47/ 3.60 68002 Alumax, Round 1/ x 43/ 2.20 68003 Alumax, Square 1/ x 43/ 2.20 68004 Trunnell, Quad 4 1/ x 43/ 1.70 68005 Trunnell, Quad 5 1/ x 51/ 1.70 68006 Trunnell, Quad 4 1/ x 43/ 1.70 68007 Western Steel 3/1 x 415/1 3.10 Trunnell Western Fittings Springs: Alumax Round Part # Brand 7" 6660_ Ames ABC $3.40 $4.00 $4.70 $9.50 $14.50 $23.00 6661_ McDowell 5.00 5.00 7.00 8.00 10.00 15.00 20.00 Alumax Square Pierce WedgeTite: For Bolton Flange Pack Repair & Dresser Couplers Part # Brand 1 6669_ NOM (OD) $7.00 $9.00 $8.00 $10.00 $20.00 $15.00 6668_ PIP 8.00 9.00 10.00 15.00 42.00 6667_ IPS 7.00 8.00 9.00 10.00 21.00

Page 170 Nipples, Tbe, Steel Black Black Steel Black Nipples Steel Black 1/8 1/4 3/8 1/2 3/4 1 11/4 Diameter Diameter Diameter Diameter Diameter Diameter Diameter Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number Close 96348 $0.90 96365 $1.00 96382 $1.10 96399 $0.90 96416 $1.00 96433 $1.50 96449 $1.90 11/2 Long 96349 1.10 96366 1.10 96383 1.20 96400 0.90 96417 1.10 2 Long 96350 1.10 96367 1.10 96384 1.20 96401 0.90 96418 1.10 96434 1.60 96450 2.20 21/2 Long 96351 1.20 96368 1.40 96385 1.60 96402 1.10 96419 1.30 96435 1.70 96451 2.30 3 Long 96352 1.20 96369 1.40 96386 1.60 96403 1.10 96420 1.30 96436 1.70 96452 2.30 31/2 Long 96353 1.50 96370 1.70 96387 1.80 96404 1.30 96421 1.60 96437 2.20 96453 2.70 4 Long 96354 1.50 96371 1.70 96388 1.80 96405 1.30 96422 1.60 96438 2.20 96454 2.70 41/2 Long 96355 2.90 96372 2.50 96389 2.60 96406 1.50 96423 2.00 96439 2.60 96455 3.20 5 Long 96356 2.90 96373 2.50 96390 2.60 96407 1.50 96424 2.00 96440 2.60 96456 3.20 51/2 Long 96357 3.10 96374 3.00 96391 2.90 96408 1.70 96425 2.20 96441 3.00 96457 3.90 6 Long 96358 3.10 96375 3.00 96392 2.90 96409 1.70 96426 2.20 96442 3.00 96458 3.90 7 Long 96359 4.30 96376 4.60 96393 5.20 96410 3.00 96427 3.70 96443 4.90 96459 6.20 8 Long 96360 4.30 96377 4.60 96394 5.20 96411 3.00 96428 3.70 96444 4.90 96460 6.20 9 Long 96361 4.90 96378 5.40 96395 5.80 96412 3.60 96429 4.30 96445 5.80 96461 7.40 10 Long 96362 4.90 96379 5.40 96396 5.80 96413 3.60 96430 4.30 96446 5.80 96462 7.40 11 Long 96363 5.00 96380 5.90 96397 6.60 96414 4.30 96431 4.80 96447 6.60 96463 8.40 12 Long 96364 5.00 96381 5.90 96398 6.60 96415 4.30 96432 4.80 96448 6.60 96464 8.40 TBE (threaded both ends) Steel Black Nipples Steel Black 11/2 2 21/2 3 4 6 Diameter Diameter Diameter Diameter Diameter Diameter Diameter Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number Close 96465 $2.40 96481 $3.20 96496 $10.10 96510 $12.00 96524 18.10 96537 38.70 97696 78.00 11/2 Long 2 Long 96466 2.60 21/2 Long 96467 2.90 96482 3.70 3 Long 96468 2.90 96483 3.70 96497 10.40 96511 13.00 31/2 Long 96469 3.20 96484 4.50 96498 12.20 96512 15.40 4 Long 96470 3.20 96485 4.50 96499 12.20 96513 15.40 96526 20.90 41/2 Long 96471 3.90 96486 5.20 96500 13.40 96514 17.00 96527 23.90 5 Long 96472 3.90 96487 5.20 96501 13.40 96515 17.00 96528 23.90 51/2 Long 96473 4.50 96488 6.00 96502 14.00 96516 18.50 96529 25.50 6 Long 96474 4.50 96489 6.00 96503 14.00 96517 18.50 96530 25.50 96541 50.40 97697 105.00 7 Long 96475 7.10 96490 10.10 96504 17.70 96518 25.00 96531 29.50 96542 60.80 8 Long 96476 7.10 96491 10.10 96505 17.70 96519 25.00 96532 29.50 96543 60.80 97698 140.00 9 Long 96477 8.30 96492 11.90 96506 19.90 96520 28.00 96533 33.50 96544 70.40 10 Long 96478 8.30 96493 11.90 96507 19.90 96521 28.00 96534 33.50 96545 70.40 97699 150.00 11 Long 96479 9.60 96494 13.70 96508 22.20 96522 31.10 96535 39.30 96546 92.00 12 Long 96480 9.60 96495 13.70 96509 22.20 96523 31.10 96536 39.30 96547 82.90 97700 180.00 TBE (threaded both ends) List Price

Page 171 Nipples, Tbe, Steel Galvanized Galvanized Steel Galvanized Nipples Steel Galvanized 1/8 1/4 3/8 1/2 3/4 1 11/4 Diameter Diameter Diameter Diameter Diameter Diameter Diameter Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number Close 96548 1.10 96565 1.20 96582 1.30 96599 1.00 96616 1.30 96633 1.70 96649 2.30 11/2 Long 96549 1.50 96566 1.40 96583 1.50 96600 1.10 96617 1.40 2 Long 96550 1.50 96567 1.40 96584 1.50 96601 1.10 96618 1.40 96634 2.00 96650 2.50 21/2 Long 96551 2.00 96568 1.80 96585 2.00 96602 1.30 96619 1.50 96635 2.20 96651 2.70 3 Long 96552 2.00 96569 1.80 96586 2.00 96603 1.30 96620 1.50 96636 2.20 96652 2.70 31/2 Long 96553 2.40 96570 2.20 96587 2.30 96604 1.60 96621 2.00 96637 2.60 96653 3.20 4 Long 96554 2.40 96571 2.20 96588 2.30 96605 1.60 96622 2.00 96638 2.60 96654 3.20 41/2 Long 96555 4.00 96572 2.90 96589 3.20 96606 1.90 96623 2.30 96639 3.20 96655 4.00 5 Long 96556 4.00 96573 2.90 96590 3.20 96607 1.90 96624 2.30 96640 3.20 96656 4.00 51/2 Long 96557 4.50 96574 3.30 96591 3.60 96608 2.20 96625 2.80 96641 3.70 96657 4.70 6 Long 96558 4.50 96575 3.30 96592 3.60 96609 2.20 96626 2.80 96642 3.70 96658 4.70 7 Long 96559 5.90 96576 5.60 96593 5.70 96610 3.80 96627 4.90 96643 6.10 96659 7.50 8 Long 96560 5.90 96577 5.60 96594 5.70 96611 3.80 96628 4.90 96644 6.10 96660 7.50 9 Long 96561 6.90 96578 6.50 96595 6.80 96612 4.50 96629 5.40 96645 7.00 96661 9.00 10 Long 96562 6.90 96579 6.50 96596 6.80 96613 4.50 96630 5.40 96646 7.00 96662 9.00 11 Long 96563 7.70 96580 7.30 96597 7.50 96614 5.10 96631 6.00 96647 8.20 96663 10.80 12 Long 96564 7.70 96581 7.30 96598 7.50 96615 5.10 96632 6.00 96648 8.20 96664 10.80 TBE (threaded both ends) List Price Steel Galvanized Nipples Steel Galvanized 11/2 2 21/2 3 4 6 Diameter Diameter Diameter Diameter Diameter Diameter Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Part Number List Price Close 96665 $2.70 96681 $3.80 96696 $11.40 96710 13.60 96724 20.40 96737 77.30 11/2 Long 2 Long 96666 2.90 21/2 Long 96667 3.20 96682 4.30 3 Long 96668 3.20 96683 4.30 96697 11.80 96711 15.50 31/2 Long 96669 4.10 96684 5.20 96698 13.70 96712 18.20 4 Long 96670 4.10 96685 5.20 96699 13.70 96713 18.20 96726 24.40 41/2 Long 96671 5.00 96686 6.70 96700 15.30 96714 21.20 96727 27.40 5 Long 96672 5.00 96687 6.70 96701 15.30 96715 21.20 96728 27.40 51/2 Long 96673 5.60 96688 7.70 96702 16.80 96716 22.40 96729 30.30 6 Long 96674 5.60 96689 7.70 96703 16.80 96717 22.40 96730 30.30 96741 100.90 7 Long 96675 8.70 96690 12.60 96704 21.60 96718 30.20 96731 36.10 96742 121.20 8 Long 96676 8.70 96691 12.60 96705 21.60 96719 30.20 96732 36.10 96743 121.60 9 Long 96677 10.10 96692 14.80 96706 24.70 96720 34.50 96733 41.90 96744 140.90 10 Long 96678 10.10 96693 14.80 96707 24.70 96721 34.50 96734 41.90 96745 140.90 11 Long 96679 11.50 96694 16.90 96708 27.60 96722 38.80 96735 47.70 96746 183.50 12 Long 96680 11.50 96695 16.90 96709 27.60 96723 38.80 96736 47.70 96747 165.70 TBE (threaded both ends) Fittings

Page 172 Nipples, Tbe, Pvc Sch80 PVC SCH80 Nipples 1/8 1/4 3/8 1/2 3/4 1 11/4 PVC SCH80 Part Number Diameter Diameter Diameter Diameter Diameter Diameter Diameter Part Number Part Number Part Number Part Number Part Number Part Number Close 95966 $1.00 95997 $1.00 96028 $1.10 96059 $1.00 96090 $1.00 96121 $1.30 96151 $1.90 11/2 Long 95967 1.00 95998 1.00 96029 1.10 96060 1.00 96091 1.00 2 Long 95968 1.10 95999 1.30 96030 1.40 96061 1.00 96092 1.00 96122 1.40 96152 1.90 21/2 Long 95969 1.20 96000 1.30 96031 1.40 96062 1.00 96093 1.10 96123 1.50 96153 2.10 3 Long 95970 1.20 96001 1.70 96032 1.40 96063 1.10 96094 1.10 96124 1.60 96154 2.20 31/2 Long 95971 1.30 96002 1.70 96033 2.00 96064 1.10 96095 1.30 96125 1.70 96155 2.50 4 Long 95972 1.30 96003 1.90 96034 2.10 96065 1.30 96096 1.50 96126 1.90 96156 2.50 41/2 Long 95973 1.50 96004 2.00 96035 2.10 96066 1.30 96097 1.50 96127 2.00 96157 2.90 5 Long 95974 1.50 96005 2.10 96036 2.30 96067 1.40 96098 1.80 96128 2.30 96158 2.90 51/2 Long 95975 1.70 96006 2.10 96037 2.30 96068 1.40 96099 1.80 96129 2.50 96159 3.20 6 Long 95976 1.70 96007 2.20 96038 2.40 96069 1.50 96100 1.90 96130 2.60 96160 3.20 7 Long 95977 2.00 96008 2.30 96039 2.39 96070 1.70 96101 1.90 96131 2.80 96161 3.70 8 Long 95978 2.20 96009 2.40 96040 2.60 96071 1.90 96102 2.20 96132 3.00 96162 3.80 9 Long 95979 2.29 96010 2.50 96041 2.80 96072 1.90 96103 2.30 96133 3.40 96163 4.20 10 Long 95980 2.70 96011 2.50 96042 2.90 96073 2.00 96104 2.50 96134 3.60 96164 4.50 11 Long 95981 2.90 96012 2.70 96043 3.00 96074 2.20 96105 2.70 96135 3.80 96165 4.80 12 Long 95982 2.90 96013 3.00 96044 3.20 96075 2.30 96106 2.80 96136 4.10 96166 5.10 13 Long 95983 3.70 96014 4.29 96045 4.60 96076 2.60 96107 3.10 96137 4.70 96167 5.90 14 Long 95984 4.00 96015 4.40 96046 4.80 96077 2.60 96108 3.10 96138 4.70 96168 6.10 15 Long 95985 4.30 96016 4.60 96047 5.00 96078 2.80 96109 3.20 96139 5.10 96169 6.40 16 Long 95986 4.70 96017 5.80 96048 5.20 96079 3.20 96110 3.60 96140 5.10 96170 6.70 17 Long 95987 4.90 96018 6.10 96049 5.30 96080 3.30 96111 3.70 96141 5.80 96171 7.40 18 Long 95988 4.99 96019 6.19 96050 5.50 96081 3.40 96112 3.70 96142 6.10 96172 8.00 19 Long 95989 5.30 96020 6.49 96051 5.70 96082 3.60 96113 4.20 96143 6.20 96173 8.90 20 Long 95990 5.70 96021 6.60 96052 5.80 96083 3.70 96114 4.40 96144 6.50 96174 9.10 22 Long 95991 6.00 96022 6.89 96053 6.30 96084 3.70 96115 4.60 96145 6.60 96175 9.30 24 Long 95992 6.60 96023 7.00 96054 6.40 96085 4.50 96116 5.40 96146 6.80 96176 9.40 30 Long 95993 8.40 96024 8.70 96055 8.70 96086 5.60 96117 7.40 96147 9.60 96177 12.30 36 Long 95994 9.90 96025 10.50 96056 11.10 96087 7.60 96118 9.20 96148 12.70 96178 13.40 42 Long 95995 11.50 96026 12.30 96057 12.50 96088 10.20 96119 10.80 96149 15.60 96179 17.00 48 Long 95996 13.19 96027 13.70 96058 14.10 96089 10.70 96120 12.10 96150 16.20 96180 17.70 TBE (threaded both ends) PVC SCH80 Nipples 11/2 2 21/2 3 4 6 PVC SCH80 Diameter Diameter Diameter Diameter Diameter Diameter Close 96181 $2.00 96211 $2.70 96240 $9.20 96268 $11.00 96296 $17.90 96323 $19.70 11/2 Long 2 Long 96182 2.30 21/2 Long 96183 2.40 96212 3.20 3 Long 96184 2.60 96213 3.20 96241 10.50 96269 12.00 31/2 Long 96185 2.90 96214 3.70 96242 12.00 96270 14.00 96297 22.50 4 Long 96186 3.40 96215 4.40 96243 13.50 96271 16.00 96298 24.90 41/2 Long 96187 3.40 96216 4.40 96244 13.50 96272 16.00 96299 24.90 96324 27.90 5 Long 96188 3.80 96217 4.80 96245 15.30 96273 17.90 96300 24.90 96325 30.60 51/2 Long 96189 3.80 96218 4.80 96246 15.30 96274 17.90 96301 24.90 96326 33.40 6 Long 96190 4.10 96219 5.90 96247 16.70 96275 22.40 96302 26.70 96327 36.40 7 Long 96191 4.60 96220 6.10 96248 17.60 96276 23.70 96303 29.30 96328 41.80 8 Long 96192 5.10 96221 6.50 96249 18.50 96277 24.40 96304 31.00 96329 47.40 9 Long 96193 5.40 96222 7.00 96250 21.40 96278 25.60 96305 31.20 96330 52.80 10 Long 96194 5.70 96223 7.60 96251 22.60 96279 27.90 96306 33.10 96331 58.70 11 Long 96195 6.10 96224 8.00 96252 24.50 96280 29.80 96307 37.40 96332 64.20 12 Long 96196 6.80 96225 8.60 96253 24.70 96281 30.40 96308 43.10 96333 69.60 13 Long 96197 7.00 96226 8.90 96254 26.70 96282 31.50 96309 44.70 96334 75.10 14 Long 96198 7.60 96227 9.10 96255 27.80 96283 34.10 96310 45.80 96335 80.60 15 Long 96199 7.90 96228 9.80 96256 29.80 96284 36.20 96311 48.00 96336 86.00 16 Long 96200 8.60 96229 10.50 96257 32.00 96285 38.40 96312 50.10 96337 91.50 17 Long 96201 8.80 96230 11.50 96258 32.50 96286 39.50 96313 53.30 96338 97.60 18 Long 96202 9.30 96231 12.80 96259 33.10 96287 41.50 96314 60.10 96339 102.40 19 Long 96203 10.40 96232 13.70 96260 36.90 96288 48.00 96315 60.70 96340 108.70 20 Long 96204 10.70 96233 13.90 96261 37.50 96289 50.60 96316 65.00 96341 113.40 22 Long 96205 10.80 96234 14.20 96262 40.70 96290 51.70 96317 67.10 96342 124.90 24 Long 96206 11.10 96235 14.30 96263 41.50 96291 57.00 96318 71.60 96343 135.80 30 Long 96207 15.20 96236 18.50 96264 50.60 96292 72.60 96319 85.30 96344 168.70 36 Long 96208 15.90 96237 24.50 96265 61.90 96293 75.10 96320 101.30 96345 202.30 42 Long 96209 21.40 96238 29.80 96266 71.50 96294 87.90 96321 123.60 96346 235.20 48 Long 96210 22.60 96239 31.60 96267 77.30 96295 98.10 96322 151.80 96347 268.20 TBE (threaded both ends) PVC Sch80

Page 173 Pumps & Accessories Section Six Pumps Diesel Pumping Units Propane Pumping Units PTO Pumps Rovatti PTO Irrigation Pump PTO Slurry/Chopper Pumps Pump Accessories Couplers/Pipe/Hose Screens & Fittings Foot Valve Parts Priming Valves Primers Generators Murphy Switches Hand Primers Pumps & Accessories

Page 174 Pumps SingleStage Engine Mount Pumps Berkeley Pedestal Mount: B3ZRM B3JRMBM B4JRMBH @ 2200 rpm GPM 250850 400900 6001500 PSI 6045 130110 125100 120.0 150.0 319.0 * for other pumps. Direct Mount: B3JQBM B4JQBH B4EYQBH B6JQBM @ 2000 rpm GPM PSI 300850 11085 4501500 10070 5001400 190130 7502250 10070 365.0 400.0 620.0 475.0 * for other pumps. Flywheel coupling NOT included. Cornell Direct Mount: 4RB 5RB 6RB 3HA 5HH 6HH @ 2200 rpm GPM PSI 3001500 9565 4002200 10470 7504000 10075 300900 140115 3001400 12095 12003600 155120 520.0 715.0 815.0 615.0 695.0 845.0 * for other pumps. Flywheel coupling included. *6HH is rated at 2000 rpm. *Cornell pumps work well at 3,000 gpm's & higher. CornellSlurry Slurry & Chopper Engine Mount Pumps 3HM 4x4x14T GPM 0800 3001500 @ 2000 rpm PSI 140100 130100 *3HM has an open impeller & therefore will handle stringy material *4x4x14T has a 2port impeller & therefore will not handle stringy material. (Excellent for hog manure) DodaChopper @ 2000 rpm GPM PSI HP 27 PD 300900 7210 3754 35 PD 3001300 12038 80115

Page 175 Pumps Pumps & Accessories Schumacher Irrigation, Inc. Phone: 4022463685 or 8002463685 Fax: 4022462072

Page 176 Floating Pumps Floats * Thickwalled Molded Polyethylene Shell * Encapsulated Expanded Polystyrene Foam * 12 Year Warranty W x L x H 2x3x 2x4x 3x4x 2x4x1 2x3x1 2x4x1 3x4x1 2x4x2 Float Capacity (lbs) 335 490 470 700 600 650 1000 900 Ship UPS UPS CC UPS UPS CC CC CC 96918 96919 96920 96921 96922 96923 96924 96925 32 32 34 41 35 41 52 50 105.00 112.00 149.00 129.00 129.00 139.00 199.00 188.00 Floating Pumps TurbiFloat Floating Pumps CALL Applications: Irrigation Municipal Industrial Commercial Group No. Discharge Body GPM PSI One 100525 6126 Two 100525 9410 Three 4001100 2011 Four & 4001200 6723 Five & 4001100 13548 Six & 11003250 337 Seven 11001750 9328 Eight 22503250 146 Nine 23004000 6332 Pump shown with optional wheel kit, which adds to the versatility and userfriendly qualities of the Turbi Float system. Further enhances installation and removal for service and site transfers, often elimination the need for lifting equipment.

Page 177 Diesel Pumping Units Diesel Irrigation Pumping Units @2000 rpm Model Engine Pump GPM PSI List Price John Deere John Deere John Deere John Deere 4045T 4039T 6059T 6059T B4JQBH B3JQBM B4JQBH B6JQBM 4001500 300860 4001500 7502250 10470 10878 10470 10470 Horsepower Chart RPM MODEL 1800 2000 2100 2200 2300 2400 CONSUMPTION SIZE WEIGHT 4039D 57 62 65 67 67 67.357 @ 1800 SAE410 1250 4045D 64 67 71 71 73 74.347 @ 1800 SAE410 1300 4039T 76 82 84 85 88 88.340 @ 1800 SAE410 1350 6059D 84 90 93 96 98 100.350 @ 1800 SAE311 1400 4045T 88 92 93 94 95 96.342 @ 1800 SAE410 1500 6068D 95 102 106 108 111 111.345 @ 1800 SAE311 1500 6059T 112 121 126 128 133 135.336 @ 1800 SAE311 1600 6068T 135 143 145 146 147 147.344 @ 1800 SAE311 1650 6076T 165 165 165 165.343 @ 1800 SAE311 2100 6076A 206 206 206 206.337 @ 1800 SAE211 2200 6619A 242 244 246.353 @ 1800 SAE111 2800 UNITS INCLUDE: Engine Pump Radiator Core Guard Electric Start(complete w/cables) Cables Battery Box (without battery) Fuel Lift Pump 15' Fuel Line Standard Duty Air Cleaner Muffler Mounting Feet Vernier Throttle Control & Panel OFF Highway Trailer w/used tires. Water Level Safety Switch (L150) Loss of Prime Switch (20PW7) Exhaust Primer Flywheel Coupling Suction Flange (if required) Discharge Priming Valve Discharge Adapter Pressure Gauge Suction Adapter Dresser Coupler Suction Pipe Foot Valve w/screen OPTIONS: Skid Mount Battery Fuel Tank (30, 62 or 125 gallon) Extra Axle Screw jack for trailer Pumps & Accessories

Page 178 PTO Pumps Caprari D2/40 D1/50 D2/50 D3/50 D2/65 D3/65 D2/80 DO4/80 DMR80 3/2 D01/125 540 540 540 540 540 540 540 540 540 540 PTO Irrigation Pumps x x x x x x x x x x 50150 50300 50250 70300 100450 150500 200700 200700 200800 5001400 Model RPM Inlet/Outlet GPM PSI Price 146133 9076 135121 170133 10797 161136 11099 167143 192140 3721 80221 80232 80222 80223 80224 80225 80227 80228 80230 80234 200.0 365.0 215.0 230.0 360.0 270.0 275.0 380.0 400.0 430.0 Gear Driven Pump Performance Model GPM 50 60 70 80 90 100 150 200 250 300 350 400 450 500 600 700 800 1000 1200 1400 Discharge Suction NPT (F) NPT (F) D2/40 PSI 146 146 145 144 143 142 133 HP 13 14 17 16 17 17 21 D1/50 PSI 90 90 90 91 91 91 90 87 87 76 HP 9 9 10 10 10 11 13 15 17 19 D2/50 PSI 135 136 137 137 137 136 135 128 121 HP 17 17 18 18 19 19 22 25 27 D3/50 PSI 170 170 170 170 167 160 150 133 HP 24 25 26 26 30 35 38 41 D2/65 PSI 107 108 108 107 105 103 100 97 HP 18 21 23 27 29 31 34 36 D3/65 PSI 161 160 156 154 151 146 142 136 HP 29 34 38 42 46 50 53 55 D2/80 PSI 110 109 109 108 108 107 105 103 99 HP 28 31 33 36 38 40 43 47 51 D04/80 PSI 167 167 166 165 163 160 159 152 143 HP 44 49 53 57 62 66 69 77 84 DMR80 3/2 PSI 193 191 189 186 183 180 178 167 156 142 HP 51 54 54 61 64 67 71 77 83 90 D01/125 PSI 37 36 35 34 30 25 21 HP 17 19 21 22 23 25 26 GPM 50 60 70 80 90 100 150 200 250 300 350 400 450 500 600 700 800 1000 1200 1400

Rovatti TOF50 Gear Driven Model *T0F50 T140E T240E T165AE T150E T250E T265E T280E T285E T380AE T3100AE T3110E T4100E T4125E MBN20 540 540 540 540 540 540 540 540 540 540 540 540 540 540 540 x 21/x11/ 21/x11/ 21/x 21/x 21/x 21/x x21/ x21/ x21/ x x x x x 25130 50130 50130 100260 100260 100330 100210 160460 160530 160460 260790 260920 260790 5301060 10562640 Page 179 Rovatti PTO Irrigation Pump Rovatti Irrigation Pump R300/90 R300/90 R300/90 R300/90 R300/90 R300/90 R300/90 R450/90 R450/90 R450/90 R600/90 R800/90.1 R800/90.1 R450/90 *T0F50 is mounted directly to tractor without drive shaft or cart. Drive Shaft RPM Inlet/Outlet GPM PSI HP Price 7669 150140 182176 8880 129119 149125 159135 10186 120102 175165 11185 134108 181143 125110 3725 910 1320 2131 1219 1929 2439 2435 1832 2543 3866 3355 4683 6196 6590 4055 80235 80236 80237 80238 80239 80240 80241 80242 80243 80244 80245 81425 80246 80248 97688 45.0 220.0 255.0 215.0 240.0 240.0 250.0 240.0 250.0 300.0 290.0 300.0 375.0 375.0 Pump Performance Model GPM 25 50 70 80 90 100 120 130 160 190 210 240 260 330 400 460 530 660 790 920 1060 1190 1320 1450 1580 1850 2110 2380 2640 Discharge Suction FPT FPT *T0F50 PSI 76 76 76 75 74 73 72 69 HP 9 9 9 9 9 9 9 9 T140E PSI 150 149 148 147 145 143 140 HP 13 14 15 16 18 19 20 21/ 11/ T240E PSI 182 181 181 180 179 178 176 HP 21 22 24 26 28 29 31 21/ 11/ T165AE PSI 88 88 88 88 87 85 83 80 HP 12 13 13 14 16 17 18 19 21/ T150E PSI 129 129 129 128 127 125 122 119 HP 19 20 21 23 25 26 28 29 21/ T250E PSI 149 149 149 148 147 145 143 141 125 HP 24 25 26 28 30 32 33 35 39 21/ T265E PSI 159 158 157 153 146 135 HP 24 25 27 30 32 35 21/ T280E PSI 101 101 101 100 100 97 93 86 HP 18 20 21 22 24 27 29 32 21/ T285E PSI 120 120 120 120 119 118 115 110 102 HP 25 26 28 30 32 35 39 41 43 21/ T380AE PSI 175 175 175 175 175 173 170 165 HP 38 40 42 44 46 53 60 66 21/ T3100AE PSI 111 111 109 107 104 94 85 HP 33 36 39 43 46 51 55 T3110E PSI 134 133 133 132 131 128 121 108 HP 46 50 55 59 63 70 77 83 T4100E PSI 181 180 180 178 175 166 143 HP 61 66 70 74 79 90 96 T4125E PSI 125 124 122 118 110 HP 65 72 79 85 90 MBN20E PSI 37 37 37 36 36 34 32 29 25 HP 39 41 43 45 47 50 53 54 54 Model GPM 25 50 70 80 90 100 120 130 160 190 210 240 260 330 400 460 530 660 790 920 1060 1190 1320 1450 1580 1850 2110 2380 2640 These rugged, high performance powertakeoff (PTO) irrigation pumps are inexpensive and designed for easy mobility. Their unique watercooled gearbox allows the gearbox oil to be kept at a constant low temperature. This important feature reduces gasket damage due to high oil temperatures. The heavyduty pump frame and dynamically balanced impeller is made of durable cast iron construction. A graphic rope packing seal provides shaft lubrication. A heavyduty, bowed axle 2wheel cart allows for easy mobility. Standard pump discharge is horizontal, but can be rotated vertically. 540 & 1000 rpm models are available. PTO pumps are ideal for irrigators who do not want to maintain yet another engine on their farm. In addition to irrigation, these pumps are designed for a wide range of applications including water transfer, washdown, tank filling, etc. These durable PTO pumps will give years of dependable service at affordable prices. Features: Oversized bearings Replaceable wear ring 540 & 1000 rpm speeds Finest grade of cast iron for high efficiency Unique watercooled gearbox for extended gear life Pumps & Accessories

Page 180 PTO Pumps Berkeley Model RPM Inlet/Outlet GPM PSI Price T1B6ZRMCCW 540 x Get Get 97815 400.0 (Flood Pump) Berkeley Flange Kits Discharge Priming Valve Flange Kit Suction Flange Kit FPT 97817 97818 480.00 410.00

Page 181 PTO Chopper Pumps PTO Chopper Pumps Model RPM HP Req. GPM PSI Part Number List Price DodaChopper AFIL27 AFIL27 AFIL27 AFIL35 AFIL35 540 540 1000 540 1000 4060 72105 135165 90130 130170 300900 3001000 300700 4001300 4001300 8020 13055 210175 13555 17580 80252 80253 80254 80255 80256 *Ideal for cattle manure with straw & hay *Mechanical seal. *AFIL20 does not have a cutter blade RovattiChopper TL285GA w/tc85 TL380GA w/tc80 TL3110GA w/tc110 TL4100GA w/tc100 TL4100GA w/tc100 540 540 540 540 1000 2439 3753 4064 6294 6294 158475 158343 317924 264686 264686 114102 172156 12781 183156 183156 80268 80269 80270 80271 80272 *Ideal for hog manure & light dairy. *Mechanical seal. The Rovatti chopper/slurry pumps are highpressure pumps with a unique "bolton" chopper system. These units are ideal to effectively transport your manure slurry to the application site. The rotating chopper blade will cut and shred straw and other solids to small particles suitable for pumping and spraying through a volume sprinkler. They will run at much lower horsepower requirements their competitors. For example the TL3110GA at 540rpm requires only 41 to 64 horsepower, while the comparable Doda DAF1L27 at 540rpm requires 72 to 105 horsepower. Features: Lubricated chopper shaft bushings Chopper shaft shear pins to reduce risk of damage to the shaft and impeller Special permanently lubricated mechanical seal for longer life Oversized bearings Replaceable wear ring 540 & 1000 rpm speeds Finest grade of cast iron for high efficiency Unique watercooled gearbox for extended gear life Twowheel cart for easy positioning and transport Optional Equipment Includes: Automatic priming system which enables you to pump in as little as 15 seconds Quick Couplings for fast and easy pipe or hose hookup Model GPM 50 100 150 200 250 300 350 400 500 600 700 800 900 1000 TL285GA PSI 112 113 114 114 114 113 111 109 HP 20 21 24 28 31 34 36 39 TL380GA PSI 173 173 172 171 170 163 155 HP 32 35 37 41 45 49 53 TL3110GA PSI 126 127 128 129 129 129 127 124 119 112 106 97 84 65 HP 30 32 34 36 37 40 43 44 48 52 56 60 63 64 TL4100GA PSI 184 184 183 183 182 181 179 178 173 166 153 *will handle solids HP 48 52 56 59 62 66 70 72 80 87 94 Pumps & Accessories

Page 182 Pumps Electric Motor Pumps Berkeley Single Phase or Three Phase Cornell Single Phase or Three Phase Submersible Pumps Goulds/Berkeley Cooling Coil motor & pump comes disassembled. requires a panel box on single & three phase and a control box on single phase. heavy duty check valves required on all submersible pumps longer wire will be needed to connect to above ground panel. 75 hp OD 65/ 85/ 103/ 97711 97712 97713 975.00 1,020.00 1,050.00 NOTE: Cooling Coil Warranty will be void if there is no Bolted Compression Coupler or Flange between the Cooling Coil and the Pump Discharge. 125 hp OD 65/ 85/ 103/ 97711 97712 97713 975.00 1,020.00 1,050.00 * Painted Steel Body * Copper Tubing and Brass Returns * Standard Length 7 * Plain Ends for easy customizing * Pressure Tested Rubber Expansion Joints *To accommodate pressure loads, relieve movement stress, reduce noise, isolate vibration, compensate for misalignments after system goes on stream and prolong the life of motive equipment. Single Sphere, Single Sphere, Single Sphere, Single Sphere, Single Sphere, Double Sphere, Double Sphere, Double Sphere, Double Sphere, Double Sphere, 68031 68032 68033 68034 68035 68036 68037 68038 68039 68040 18.3 26.8 40.6 56.6 83.0 20.3 29.5 43.8 64.1 95.0 105.00 150.00 225.00 320.00 445.00 125.00 210.00 290.00 400.00 615.00

Gasoline Pumps Honda 31/2 hp, 11/ 5 hp, 5.5 hp, 8 hp 11 hp WH 15 X WH 20 X WMP 20 X WT 30 X WT 40 X Page 183 80196 80197 80198 69839 69840 48.5 52.0 52.0 132.0 172.0 Pumps 1,125.00 1,289.00 1,025.00 2,499.00 3,775.00 WH15X High Pressure, Centrifugal, SelfPriming 1. Pump EastStart Honda OHV Commercial Engine 115 gal./min. Capacity Lightweight Aluminum Case Cast Iron Volute and Impeller Easy Carry Handle WH20X High Pressure, Centrifugal, SelfPriming Pump EasyStart Honda OHV Commercial Engine 134 gal./min. Capacity Lightweight Aluminum Case Cast Iron Volute and Impeller Easy Carry Handle WMP20X MultiPurpose, Centrifugal SelfPriming Pump EasyStart Honda OHV Commercial Engine 220 gal./min. Capacity Thermoplastic Pump Housing for Chemical Capability Full Frame Protection Isolation Mounted Engine and Pump Protected by Honda Oil Alert WT30X HeavyDuty Construction Trash Pump EasyStart Honda OHV Commercial Engine Full Frame Protection 319 gal./min. Capacity Solid Handling Capability Up to 1 1/1 Easy, Quick CleanOut Port EasyService Wear Plate Protected by Honda Oil Alert * for other sizes and brands on these economical selfpriming pumps. *15' max. suction lift WT40X HeavyDuty Construction Trash Pump EasyStart Honda OHV Commercial Engine Full Frame Protection 604 gal./min. Capacity Solid Handling Capability Up to 1 1/1 Easy, Quick CleanOut Port EasyService Wear Plate Protected by Honda Oil Alert Self Priming Pumps & Accessories

Page 184 Your complete supply house for: Power Units Engines Motors Pumps Engine & Pump Parts & Fittings Please call for all of your pumping needs. Just let us know your psi and gpm requirements over the phone, and our computer software will quickly choose the most efficient pump for your conditions. John Deere, Cummins, Perkins, Isuzu, Lister, Deutz and other engines provide quality, dependable service for irrigation use.

Page 185 Pumps & Accessories

Page 186

Page 187 Pumps & Accessories

Page 188 Pump Accessories Gland Berkeley Small Large B3Z & B6Z B4J 81000 81001 137.00 223.00 Packing Berkeley Small B3ZRM, B6ZRM 5/1 Large B3JQBM, B4JRMBH 3/ S14022 S13436 80410 80412 0.2 0.7 47.00 76.00 Packing Puller Packing Puller 80413 21.00 Packing Braided 1/ x 25' Box 5/1 x 18' Box 3/ x 12' Box 96859 96860 96861 57.00 49.00 45.00 Suction Adapter (Galvanized steel) Install with eccentric dip downward (as shown). With 3/ FPT outlet on top. Ball & sockets may be welded onto plain end Thrd OD x x x x x x x x x x x x 80430 80431 80432 80510 80511 80512 80513 80514 80515 80517 80516 80518 2.9 4.0 6.0 7.0 12.7 7.6 12.6 12.1 14.1 19.3 16.3 19.8 61.00 73.00 92.00 106.00 135.00 119.00 140.00 95.00 139.00 182.00 180.00 260.00 Discharge Adapter (Galvanized steel) Thrd Cplr x x x x x x x x x x x x x x 80440 80441 80442 80443 80520 80444 80521 80522 80445 80446 80526 80523 80524 80525 2.1 3.1 2.5 3.5 4.3 5.4 6.7 9.8 5.9 9.4 11.1 8.1 12.3 14.9 59.00 69.00 57.00 69.00 57.00 89.00 95.00 120.00 76.00 115.00 159.00 79.00 129.00 210.00

Page 189 Dresser Couplers, Suction Pipe Dresser Coupler Long (POWDER COATED) OD OD OD OD OD OD OD 80550 80551 80552 80553 80555 80556 80557 4.0 5.5 6.5 7.5 9.0 12.0 21.0 59.00 69.00 79.00 109.00 119.00 149.00 225.00 Dresser Coupler Long (powder coated) Complete: OD OD OD OD OD OD 80530 80536 80531 80532 80533 80534 8.0 11.0 13.0 16.0 23.0 27.0 81.00 97.00 114.00 130.00 185.00 253.00 Body Only: 62039 62040 62041 62042 62043 62044 4.0 4.0 5.0 7.0 9.0 11.0 30.00 38.00 44.00 48.00 61.00 89.00 Flange Pack (Double): (for long body) OD OD OD OD OD OD 62021 62022 62023 62024 62025 62026 4.0 7.0 8.0 9.0 14.0 16.0 51.00 59.00 70.00 82.00 124.00 164.00 Suction Pipe (Aluminum) x 45 o.058 x 90 o.058 3' o o 45 or 90 bend 25' x 45 o.072 x 90 o.072 x 90 o.094 80540 80541 80542 80543 80545 37.8 37.8 63.3 63.3 103.2 275.00 329.00 449.00 495.00 845.00 Suction Boot (Rubber) ID * OD 7" 9" 11" 131/ 80546 80547 80548 80549 3.2 4.1 5.8 15.5 56.00 70.00 110.00 235.00 * For a clamp: Put together two of the 162174 Tbolt clamps. Foot Valve/Screen (Cast Iron) 11/ 21/ 69603 80706 80707 80708 69604 69605 69606 4.7 6.6 9.1 16.5 36.3 32.00 46.00 59.00 74.00 125.00 295.00 468.00 Pumps & Accessories

Page 190 Intake Screens & Fittings Screen w/foot Valve 69844 80709 69845 80710 80711 80712 7.0 11.0 14.0 17.0 26.5 46.0 200.00 245.00 325.00 405.00 570.00 975.00 *Foot Valve Drain Kit w/cap 97666 10.00 0.050 Screen wall thickness 0.080 Screen available at additional cost Standard holes are 1/ round Also available in 1/ or 1/ @ additional cost Other sizes are also available. Please call. * Use garden hose to drain suction line. 90 o Suction Elbow (Cast aluminum) x 90 o x 90 o x 90 o x 90 o 80719 80720 80721 80722 7.0 10.5 14.5 23.0 153.00 233.00 357.00 562.00 45 o Suction Elbow (Cast aluminum) x 45 o x 45 o x 45 o x 45 o 80729 80730 80731 80732 6.0 9.0 12.0 17.0 141.00 219.00 314.00 555.00 Intake Strainer 0.050 Screen wall thickness Standard holes are 1/ round Also available in 1/ or 1/ @ additional cost With slide: 10 5/ x 7 1/ 16 1/ x 9 1/ 2 x 11 1/ 69793 69794 80733 80734 80735 3.5 4.5 6.0 11.0 15.0 59.00 84.00 100.00 175.00 229.00 Note: Intake strainers are smaller than Jumbo.

Page 191 Jumbo Screen single With slide: Height x Width 1 x 13 5/ 1 x 13 5/ 1 x 13 5/ 80750 80751 80752 Screens 17.0 18.0 18.5 359.00 359.00 359.00 Without slide: 1/ Standard Round Holes (also available in 1/, 1/, 3/ or 1" @ additional cost) 0.080 Standard Wall Thickness (also available in.125 in 3/ & 1" only @ additional cost) Easily and quickly attaches to the end of the aluminum suction pipe by drilling three holes in the tubing and inserting bolts. 1 x 13 5/ 1 x 13 5/ 1 x 13 5/ 80760 80761 80762 14.5 14.0 13.5 303.00 303.00 303.00 Jumbo screen double With slide: Height x Width 3 x 13 5/ 3 x 13 5/ 3 x 13 5/ 80770 80771 80772 38.0 38.0 40.0 386.00 586.00 586.00 Without slide: 3 x 13 5/ 3 x 13 5/ 3 x 13 5/ 80780 80781 80782 21.5 21.5 21.5 475.00 475.00 475.00 1/ Standard Round Holes (also available in 1/, 1/, 3/ or 1" @ additional cost) 0.080 Standard Wall Thickness (also available in.125 in 3/ & 1" only @ additional cost) Easily and quickly attaches to the end of the aluminum suction pipe by drilling three holes in the tubing and inserting bolts. Liquid Manure screen 1long x 1wide 1long x 1wide 3long x 1wide 68095 68096 68097 17.0 17.0 25.0 375.00 375.00 590.00 1" holes,.12 thick screen w/corrosion resistant alloy and stainless steel bolts & nuts. Easily and quickly attaches to the end of the aluminum suction pipe by drilling three holes in the tubing and inserting bolts. SelfCleaning Screen (Perfection) IMPORTANT: A partially closed gate valve on the discharge side of pump is required to provide adequate working pressure to the strainer while filling the irrigation line. Powder epoxy coated aluminum screen.09. SelfCleaning Screen (Riverscreen) Floating screen. Requires only of water. Must have current to operate, otherwise order the optional power drive. 8 mesh (.097") stainless steel screen. All SS Screws & Bolts Prices effective January 1, 2013 BB XL XL Power Drive Foot Valve GPM 50 160 325 625 1150 1500 1900 2500 2500 GPM 100350 300950 5501700 8252600 12004000 4' pontoon 6' pontoon 8' pontoon 10' pontoon 10' pontoon Ship UPS UPS UPS UPS UPS UPS CC CC CC Ship CC CC CC CC CC UPS 97623 97624 80785 80786 80787 80788 97625 97626 97627 95428 95429 95430 95431 95438 95432 96849 4.0 15.0 13.0 25.0 34.0 55.0 65.0 90.0 90.0 200.0 225.0 250.0 275.0 240.0 235.00 470.00 541.00 1,176.00 1,475.00 2,040.00 2,410.00 2,725.00 2,820.00 NET Price 2,300.00 3,100.00 3,400.00 3,800.00 4,300.00 200.00 525.00 Pumps & Accessories

Page 192 Foot Valve Parts Round hole screen 11/ 21/ Female pipe thread connection. 69590 69591 69592 69593 69594 69595 69596 2.7 9.6 18.00 20.00 22.00 29.00 38.00 97.00 150.00 Square hole screen 11/ 21/ 69597 69598 69599 69600 69601 69602 6.1 23.00 29.00 36.00 43.00 45.00 93.00 Female pipe thread connection. Suction flange (Cast aluminum) 80818 80819 80820 80821 1.3 1.6 2.4 16.00 28.00 44.00 65.00 Ring Gasket 66484 66486 66488 66480 3.00 4.30 11.80 16.50 Standard FV Body (Cast aluminum) x 45 o x 45 o x 45 o x 45 o 80824 80825 80826 80827 129.00 199.00 314.00 510.00 *Does NOT include suction flange, ring gasket, valve flapper cover, valve flapper gasket, valve flapper weight or valve seat ring. Valve Flapper cover 80828 80829 80830 80831 0.8 3 8.80 13.00 22.00 37.00 Valve Flapper/gasket Rubber 80713 80714 80715 80716 80717 80718 80725 0.2 0.3 0.3 0.6 1.5 10.70 15.00 18.00 21.00 35.00 54.00 110.00 Prices effective January 1, 2013

Page 193 Foot Valve Parts Valve Flapper 80832 80833 80834 80835 0.2 5.00 10.00 13.00 22.00 Valve Seat Ring (Cast aluminum) 80837 80838 80839 80840 3.5 30.00 54.00 59.00 106.00 Foot Valve Screen 61/ high x 71/ wide 83/ high x 91/ wide 131/ high x 111/ wide 21" high x 135/ wide 80842 80843 80844 80845 1.5 16.00 26.00 50.00 72.00 1/ Standard Round Holes (also available in 1/, 1/, 3/ or 1" 0.050 Standard Wall Thickness (also available in.080) Bottom Disc (Cast aluminum) 80846 80847 80848 80849 1.4 3.4 5.4 24.00 48.00 57.00 100.00 Bolt/Nut/Washer Screen Bolt/Nut (3 req.) 1/x 80850 2.50 (3 req.) (3 req.) (4 req.) 1/x 1/x153/ 1/x227/ 80851 80852 80853 3.50 3.50 5.00 Flange (4 req.) (4 req.) Seat Body Bolt/Nut (5 req.) (8 req.) (11 req.) (12 req.) Cover 5/1x21/ 5/1x21/ 1/x11/ 1/x11/ 1/x11/ 1/x11/ 1/x3/ 80822 80823 80841 80841 80841 80841 80836 1.60 1.70 1.00 1.00 1.00 1.00 1.00 Pumps & Accessories Prices effective January 1, 2013

Page 194 Suction Fittings & Parts ELBOW PARTS Elbow (Cast aluminum) Flange (Cast aluminum) Ring Gasket Flange Bolt/Nut/Washer x 90 o x 90 o x 90 o x 90 o x 45 o x 45 o x 45 o x 45 o For,, (4 req) For (4 req.) 5/1x21/ 5/1x21/ 80810 80811 80812 80813 80814 80815 80816 80817 80818 80819 80820 80821 66484 66486 66488 66480 80822 80823 1.3 1.6 2.4 118.00 173.00 255.00 436.00 104.00 165.00 229.00 410.00 16.00 28.00 44.00 65.00 3.00 4.30 11.80 16.50 1.60 1.70 Ring Casting INTAKE STRAINER PARTS Bottom Disc Casting Strainer Screen Strainer Bolt & Nut Slide Ring Bolt JUMBO STRAINER PARTS Jumbo Strainer Ring Ring Casting Bottom Disc Casting Strainer Screen Strainer Bolt & Nut Slide Ring Bolt 105/ h x 71/ w 161/ h x 91/ w 2 h x 111/ w 12 " long 1 long 251/ long 80736 80737 80738 80739 80740 80741 80742 80743 80744 80745 80746 80747 80748 80749 80753 80754 80859 80860 80861 80862 1.5 2.5 29.00 49.00 54.00 24.00 47.00 57.00 25.00 38.00 84.00 3.50 5.00 5.50 22.00 39.00 68.00 1.50 121.00 121.00 121.00 121.00 Jumbo Strainer Screen 1 h x 135/ wide 80854 98.00 Jumbo bottom disc 80858 100.00 Jumbo Slide For Single Jumbo Strainer 80855 4.3 56.00 For Double Jumbo Strainer 80856 112.00 Jumbo DRing 80863 2.4 105.00 Jumbo Strainer Bolt 4 required 80857 6.00 1/ x 193/ long Prices effective January 1, 2013

Page 195 Discharge Priming Valve Priming Valves x 80640 80650 80655 80660 20.0 36.0 55.0 70.0 567.00 770.00 903.00 920.00 x,, (includes close nipple) Replacement Parts for Discharge Priming Valve 5 2 9 7 6 1 8 11 4 3 12 14 10 13 Item Clack x x x x OD 4.7 OD 5.7 OD 6.7 OD Part # 80641 80651 80656 80661 Key 2 2 2 2 102.00 196.00 227.00 245.00 Valve Body x x x x 81002 81003 81004 81005 1 1 1 1 570.00 595.00 1,215.00 1,079.00 Clack Hinge Handle Assembly x x x x 81009 81010 81011 81012 5,6, 8 5,6, 8 5,6, 8 5,6, 8 278.00 282.00 292.00 297.00 'O' Ring Spring Pin (2 required) Spring Spring Grommet Spacer Bolt Stud Nut External Tooth Washer Flat Washer x 81013 81014 81015 81016 81007 81008 81017 60902 81018 96762 7 9 10 10 3 4 11 14 13 12 6.50 6.50 14.50 16.50 6.50 20.00 7.60 0.08 3.30 3.20 Pumps & Accessories Prices effective January 1, 2013

Page 196 HandD Primers HanD Pumpers #700 HanD Pumper #900 HanD Pumper 69760 69762 18.0 20.0 610.00 705.00 Uses include small or occasional jobs where it takes too long to setup on engine driven pump. Model 700 Model 900 Inlet / Outlet 1. FPT FPT Capacity.5 gal/stroke 1 gal/stroke Max. Suction Lift 20 feet 15 feet Max Discharge Head 10 feet 10 feet Features: Complete dewatering portable unit Lightweight, easy to use Cast aluminum body Pumps air, water, sewage, mud and many chemical products Ideal for priming large diameter pipes (i.e.,, sizes) Parts for #700 HanD Item Pumpers Diaphragm #700 1 3 Parts for #900 HanD Pumpers 3 9 2 10 2 10 5 5 7 7 13 11 4 12 8 13 9 11 4 11 8 6 1 6 1 15 15 14 14 16 16 Handle Grip Pump Body Fulcrum Pin Retainer Ring Fulcrum Suction Flange Discharge Flange Diaphragm Plates (2required) Discharge Valve Suction Valve Fastpin Eyebolt w/nuts Bolt, 5/1 x Bolt, 5/1 x 1" Nut, 5/1 Item Diaphragm #900 Handle Grip Pump Body Fulcrum Pin Retainer Ring Fulcrum Suction Flange Discharge Flange Diaphragm Plates (2required) Suction/Discharge Valve Fastpin Eyebolt w/nuts Bolt, 5/1 x Bolt, 5/1 x 1" Nut, 5/1 Item # Part # 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 69761 97729 97730 97731 97732 97733 97734 97735 97736 97737 97738 97739 97740 97741 97742 97743 97744 69763 97729 97730 97745 97732 97746 97747 97748 97749 97750 97751 97740 97741 97742 97743 97744 75.00 26.00 8.00 246.00 14.00 103.00 65.00 72.00 77.00 24.00 33.00 31.00 4.00 3.50 2.00 1.50 1.00 Item # Part # 80.00 26.00 8.00 315.00 14.00 112.00 69.00 72.00 81.00 23.00 33.00 4.00 3.50 2.00 1.50 1.00 Prices effective January 1, 2013

Page 197 Hand Primer #7 #9 Power & Hand Primers 80610 80620 7.0 20.0 317.00 455.00 for prices on the #5 Hand Primer, part # DP5 *3/ FPT & 11/ MPT Base #7 Features: Quick hand priming of any type of centrifugal pump, siphon tube or pump situation Lightweight and easy to install Durable and dependable Reinforced diaphragms are longlasting Provides up to 20 feet of suction lift with ease and leverage New style allows for Fulcrum Bracket to be adjusted at various angles for your convenience. #9 *3/ FPT Base Primer Capacity Chart # of Strokes to Prime Through 25' # of Strokes to Prime Through 25' # of Strokes to Prime Through 25' Primer of Suction of Suction of Suction 6.5' Lift 13' Lift 19.5' Lift 6.5' Lift 13' Lift 19.5' Lift 6.5' Lift 13' Lift 19.5' Lift #7 6 15 32 12 33 65 #9 4 9 20 10 23 45 17 37 77 Primer Selection Chart: Primer Pipe Size #7,, & #9, or larger Features: Lightweight and durable solidcast aluminum body. Reinforced diaphramgs are longlasting. Steel mounting bracket allows for easy and dependable installation. Fulcrum eyebolt can be adjusted at various angles for your convenience. Power primer 35AC 35DC (battery) 69715 69716 88.0 85.0 3,570.00 3,600.00 Features: Converts centrifugal pumps to selfprimers. Fast, efficient primer for pumps with high suction lifts. Requires minimum maintenance. Ideal for diesel or gasolinepowered engines. Pumps & Accessories Prices effective January 1, 2013

Page 198 Hand Primers Parts for #7 Hand Primer Item Diaphragm #7 Item # Part # 3 80631 61.00 15 14 13 16 Lower Housing Check Valve (Disc) Drain Cock Upper Housing Connecting Rod Assembly Handle Bracket Fast Pin (2 required) Fulcrum Eyebolt Mounting Bracket Thumb Screw Handle (Pipe) Handle Grip Bolt, Hex, 1/20 x 1" (4 Required) Nut, Hex, 1/20 (4 Required) Washer, Split Lock, 1/ (4 Required) 1 9 10 2 7 13 11 8 4 12 14 15 16 16 16 95353 95355 81102 95354 81108 81111 81112 95357 95358 95359 95360 95361 97655 97656 97657 122.00 4.00 9.00 122.00 16.00 68.00 3.60 17.00 45.00 3.50 15.00 10.00 0.20 0.20 0.50 Parts for #9 Hand Primer Item Diaphragm #9 Item # Part # 3 80621 85.00 15 14 13 16 Lower Housing Check Valve (Disc) Drain Cock Upper Housing Connecting Rod Assembly Lock Nut, 11/ Fulcrum Eyebolt Handle Bracket Fast Pin (2 required) Mounting Bracket Thumb Screw Handle (Pipe) Handle Grip Bolt, Hex, 1/20 x 1" (4 Required) Nut, Hex, 1/20 (4 Required) Washer, Split Lock, 1/ (4 Required) 1 9 10 2 7 6 8 13 11 4 12 14 15 16 16 16 81100 95355 81102 81103 81108 81109 81110 81111 81112 81113 95359 95360 95361 97655 97656 97657 141.00 4.00 9.00 140.00 16.00 17.00 26.00 68.00 3.60 45.00 3.50 15.00 10.00 1.00 0.20 0.50 Primer Hose Kit Primer Side Pump Side 3/ MPT x 3/ MPT 80622 71.00 Diaphragms #5 #7 #9 #5 Diaphragm B183 #6 Diaphragm #7 Diaphragm C106 #9 Diaphragm B61 Wade Rain #9303 Travis WPP1D 80629 80611 80631 80621 80613 80614 0.2 0.4 1.0 1.9 0.3 1.0 49.00 34.00 61.00 85.00 24.00 35.00 Prices effective January 1, 2013

Page 199 Intake Manifold Primer Intake Manifold Primer Exhaust Primer Intake Manifold Primer 80630 2.7 335.00 Features: Fast, efficient priming using engine manifold vacuum while engine runs at low speed. All working parts enclosed in fully transparent plastic housing permits observation of primer operation at all times. Lightweight plastic float with rubber "cup type" valve provides instant and positive closure as soon as priming is completed. Check valve prevents reverse flow during normal pump operation. Easy to operate...simply start engine and open one valve to begin priming. Can be readily installed on any gasoline or LPG engine of four or more cylinders to provide suction lifts up to 20 feet. Complete operation instructions are permanently attached to the primer, and detailed instructions for installation and maintenance are supplied with each unit. Connection hoses not included. Parts for Intake Manifold Primer Item Item # Part # Upper Housing Lower Housing Gaskets Top Cover Assembly Lower Cover Assembly Brackets Tie Bolts & Nuts Float Assembly Angle Valve Packing Gland Assembly 4 3 12 1/6/7 2/9 5 10/11 8 14 15/16/17 80633 80634 80635 81120 81121 81122 81123 81124 81125 81126 34.00 38.00 4.00 120.00 72.00 14.50 11.50 43.00 41.00 22.00 Pumps & Accessories Prices effective January 1, 2013

Page 200 Murphy Switches Magnetic Switch Murphy #117 DC (12/24 Volt) 60020 0.8 56.00 Murphy #518APH (12 Volt) (has 6 prongs for Deutz diesels) 60021 0.7 66.00 A manually reset magnetic Circuit Breaker which is tripped by a switch gauge when a malfunction is detected. It is commonly used to break the ignition circuit of a distributor ignition engine or break power to a solenoid fuel valve when it receives a signal from the switch gauge. Oil Pressure Gauge 75 psi Murphy, #20P75 60022 0.5 69.00 100 psi Murphy, #20P100 60023 0.9 68.00 This is a basic engine or pump oil pressure switch gauge. Engine Temperature Gauge Murphy 20T254, 250 o F Water 60024 0.8 82.00 This Temperature switch gauge is available in various models and ranges to prevent engine damage from high water oil or cylinder head temperature. Vacuum/Load Gauge Murphy 20V3 60025 0.6 89.00 Commonly used to monitor manifold vacuum for loss of load or overload on spark ignition engines, vacuum switch gauges are recommended for preset limit shutdown of irrigation engines. Oil Level Safety gauge Murphy L129 60026 3.0 158.00 Combination high and low engine oil level switch gauge gives continuous indication of the oil level and condition. No need to shut down to check oil level. Adjustable high and low level contacts operate to shutdown engine or operate alarm when improper level exists. Prices effective January 1, 2013

Page 201 Murphy Switches Water Level Safety Gauge Murphy, L150 60027 1.8 113.00 Coolant level SWICHGAUGE can be visually checked with this water level SWICHGAUGE. If the water level falls too low, contact is made and the engine shutdown system is activated (or alarm is sounded.) Fuel Stop Solenoid Murphy, SV12 60028 1.4 120.00 Solenoid Fuel Valve to shut off the fuel to Diesel engines upon engine or driven equipment malfunction. Timer Murphy, 12T w/case (12 hour) 60019 4.7 535.00 Murphy, 12T wo/case (12 hour) 60031 0.8 410.00 Murphy, 24T w/case (24 hour) Murphy, 24T wo/case (24 hour) 60017 60018 4.7 1.5 535.00 430.00 Timer switches are designed to automatically shut down engine when a predetermined operating time is set. Weatherproof case Pump Pressure Gauge Murphy, 20P715 Murphy, 20P730 Murphy, 20P750 Murphy, 20P775 Murphy, 20P7100 Murphy, 20P7150 Murphy, 20P7300 In stock In stock In stock 95252 95254 95256 95257 95251 95253 95255 0.5 0.5 0.5 0.5 0.5 0.5 0.5 76.00 72.00 72.00 66.00 64.00 72.00 72.00 Monitors Discharge Pressure to detect water supply failure or parted couplings. Standard Murphy Mount Panel Murphy, WD30012 60030 5.0 Designed for mobile equipment such as trucks, tractors, and fork lifts Open panel for under dash mounting. Pressure, temperature, visual and audible alarms, before shutdown. 635.00 Murphy Toggle Switch, TF Murphy Amp Meter, 60060 Murphy Stop Button, PB1285 69704 69705 69706 21.00 23.00 11.00 Pumps & Accessories Prices effective January 1, 2013

Page 202 Generators Wire Lima Generator 5 KW 7.5 KW 10 KW 12 KW 15 KW 20 KW 68010 68011 68012 68013 68014 97687 150.0 165.0 245.0 260.0 275.0 560.0 4,410.00 5,040.00 5,250.00 5,670.00 6,405.00 8,750.00 Wire Aluminum, Single Aluminum, Triplexed Aluminum, Quadraplexed Aluminum, TufHide Underground Feeder, UF 66800 66801 66802 66803 66804 Electric Motor Marathon Baldor Others Base is not included. Gear Head Amarillo Johnson Randolph Propshaft guard 7" dia x 1 69822 6.0 58.00 7" dia x 2 4 7" dia x 3 5 7" dia x 3 6 dia x 1 2 dia x 3 6 dia x 2 5 69823 69824 69825 69826 69827 69828 12.0 15.0 18.0 13.0 27.0 28.0 61.00 66.00 72.00 87.00 129.00 139.00 Unprotected propshaft on your irrigation wells can maim or kill almost instantly. Prevent potential tragedy, rest easy during pumping season with a Hastings PropShaft guard permanently in place at each of your wells. They are simple and fast to install using existing bolts on most pumps and engines. Once on, they stay on. You have easy full access for lubrication through a slot on the underside. Formed from heavygauge galvanized steel, the guard will give your well a neat, clean appearance and you will be assured of safety around the clock! Special Features: Meets OSHA requirements Endorsed by farm safety authorities Protection against loss of life or limb Adapts to any internal combustion engine, gear head installation Slips easily over propshaft and bolts to engine and pump Complete access for lubrication through wide opening running the length of guard Rigid construction from galvanized steel. Withstands abuse and stays neatappearing year after year. Automatic Turbine Pump Oiler Advantages: Automatic operation assures lubrication whenever the pump is pumping, this helps avoid inadequate oil dripping which is the leading cause of turbine pump failure. 4 Gallon 7 Gallon 11 Gallon Brass Needle Valve 68098 68099 97665 97554 Inadequate drip oiling is the leading cause of pump failure. Continuous dripping wastes oil and causes contamination. This automatic valve assures lubrication when pump is running. Saves costly trips into the well. Manual mode for preseason lubrication. 11 15 490.00 550.00 635.00 65.00 Prices effective January 1, 2013

Page 203 Municipal/Industrial Hose & Fittings Schumacher Irrigation, Inc. is "Your Liquid Solutions Provider" We fabricate and distribute a full line of hose and accessories, couplings, clamps, fittings, valves, pumps, and suction and vacuum accessories for industry and liquid / waste water handling applications. We pride ourselves on our same day service on both standard and custom parts. Please call us for quick and quality liquid solutions. 1 U.S. Gallon Prices effective January 1, 2013 Conversions 231.00 cu. In 0.1370 cu. Ft 3.7850 liters 0.0038 cu. Meters 0.8330 Imp. Gal. 0.0238 42gal. Barrel 1 Imperial Gallon 1 Cubic Foot = = 1.20 U.S Gal. 7.48 U.S. Gal. 0.0283 cu. Meters 1 Barrel (Oil) = 42.00 U.S Gal. 1 Litre 1 Cubic Meter = = 0.2642 U.S. Gal. 35.3140 cu. Ft 264.20 U.S. Gal. 43,560.00 cu. Ft 1 Acre Foot = = 1 Acre Inch = 325,829.00 U.S. Gal. 3,630.00 cu. Ft 27,100.00 U.S. Gal. Capacity 1 Cubic Foot Per Second = 449.00 GPM 1 Acre Foot Per Day = 227.00 GPM 1 Acre Inch Per Hour = 454.00 GPM 1 Litre Per Second = 15.85 GPM 1 Cubic Meter Per Min. = 264.20 GPM 1 Miner's Inch = 9.00 GPM 1,000,000 Gal. Per Day = 695.00 GPM Head 2.31 Ft. Head of Water 1 PSI = 2.04 In. Mercury 1 Foot of Water = 0.07 Kg. Per sq. cm. 0.43 PSI 0.89 In. Mercury 1 Inch of Mercury (Vacuum) = 1.13 Ft. of Water 1 Kilogram Per Square Cm 1 Atmosphere (at sea level) = = 14.22 PSI 14.70 PSI 34.00 Ft. of Water 10.35 Meters of Water 1 U.S. Gallon of Water = 8.33 Lbs 1 Cubin Foot of Water = 62.35 Lbs 1 Kilogram or Litre = 2.20 Lbs 1 Imperial Gallon = 10.20 Lbs 1 Inch 1 Meter = = 2.54 Centimeters 3.28 Feet 39.37 Inches 1 Rod = 16.50 Feet 1 Mile = 5,280.00 Feet Horsepower 1 Horsepower = 7.46 Kilowatts or 746 watts 33,000.00 Ft lbs per minute 550.00 ft lbs per second Horsepower Input Horsepower input to motor = 1.34 x kilowatts input to motor Water Horsepower = H.P. required to lift water at a definite rate to a given distance assuming 100% efficiency: GPM x Total Head (in. ft.) Brake Horsepower = Length H.P. delivered by motor H.P. required by pump 3960 H.P. input x motor efficiency 1.34 x KW input x motor efficiency Water H.P. Pump efficiency GPM times total head (ft) 3960 x pump efficiency GPM times total head (psi) 103,000 x pump efficiency Efficiency Efficiency = Power output / Power input Motor Efficiency = H.P. output / K.W. input x 1.34 Pump Efficiency = GPM x Total Head (Ft) / 3930 x B.H.P Plant Efficiency = GPM x Total Head (Ft) / 5300 x KW input Pumps & Accessories

Page 204 PIPE DIMENSION CHART PIPE TYPE LHD 80 100 125 CL63 CL100 CL125 CL160 CL200 SCH40 PVC SCH80 PVC C900 SEWER CASING O.D. SIZE PIP PIP PIP PIP IPS IPS IPS IPS IPS IPS IPS PVC PVC SDR 91 51 41 32.5 64 41 32.5 26 21 DWV/LP DWV/LP DR18 SDR 35 SDR26 O.D. 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.8 4.215 4.5 I.D. 4.35 4.26 4.2 4.134 4.046 3.998 3.786 4.22 3.89 4.154 WALL 0.07 0.11 0.138 0.173 0.214 0.237 0.337 0.267 0.125 0.173 PSI 63 100 125 160 200 100/130 100/130 150 117.5 160 O.D. 4.95 4 1/ I.D. 4.57 WALL 0.19 PSI 160 O.D. 5.563 5.563 5.563 5.563 5.563 5.563 5.563 5.563 I.D. 5.37 5.27 5.19 5.109 4.99 5.017 4.767 5.135 WALL 0.087 0.136 0.171 0.214 0.265 0.258 0.375 0.214 PSI 63 100 125 160 200 100/130 100/130 160 O.D. 6.14 6.14 6.14 6.14 6.625 6.625 6.625 6.625 6.625 6.625 6.625 6.9 6.275 6.625 I.D. 6 5.88 5.81 5.73 6.4 6.27 6.18 6.07 5.94 6.031 5.709 6.08 5.742 6.115 WALL 0.07 0.12 0.15 0.189 0.087 0.162 0.204 0.255 0.316 0.28 0.432 0.383 0.18 0.255 PSI 43 80 100 125 63 100 125 160 200 100/130 100/130 150 117.5 160 O.D. 8.16 8.16 8.16 8.16 8.625 8.625 8.625 8.625 8.625 8.625 8.625 9.05 8.4 8.625 I.D. 7.984 7.81 7.73 7.62 8.33 8.17 8.05 7.921 7.74 7.943 7.565 7.97 7.665 7.962 WALL 0.088 0.16 0.199 0.251 0.135 0.21 0.265 0.332 0.41 0.322 0.5 0.503 0.24 0.332 PSI 43 80 100 125 63 100 125 160 200 100/130 100/130 150 117.5 160 O.D. 10.2 10.2 10.2 10.2 10.75 10.75 10.75 10.75 10.75 10.75 10.75 11.1 10.5 10.75 I.D. 9.98 9.77 9.66 9.52 10.41 10.18 10.04 9.86 9.65 9.976 9.492 11.63 9.563 9.87 WALL 0.11 0.2 0.249 0.314 0.168 0.262 0.331 0.413 0.511 0.365 0.593 0.733 0.3 0.413 PSI 43 80 100 125 63 100 125 160 200 100/130 100/130 150 117.5 160 O.D. 12.24 12.24 12.24 12.24 12.75 12.75 12.75 12.75 12.75 12.75 12.75 13.2 12.5 12.75 I.D. 11.97 11.72 11.6 11.43 12.32 12.08 11.91 11.7 11.45 11.89 11.29 11.63 11.36 11.7 WALL 0.132 0.24 0.299 0.377 0.199 0.311 0.392 0.49 0.606 0.406 0.687 0.733 0.36 0.49 PSI 43 80 100 125 63 100 125 160 200 100 100 150 117.5 160 O.D. after 14 14 14 15.3 same 1 I.D. is pip 12.86 13.07 12.41 13.48 OD as WALL size 0.538 0.437 0.75 0.85 pip after PSI 160 100 100 235 O.D. 15.3 15.3 15.3 15.3 15.3 15.3 15.3 1 I.D. 14.97 14.65 14.5 14.29 14.82 14.5 13.89 WALL 0.165 0.3 0.373 0.471 0.239 0.373 0.44 PSI 43 80 100 125 63 100 117.5 O.D. 16 16 16 17.4 1 I.D. 14.696 14.94 14.21 15.33 WALL 0.615 0.5 0.843 0.967 PSI 160 100 100 235 O.D. 18.36 18.701 18.701 18.701 18 18 18 18 19.5 18.701 1 I.D. 17.964 17.91 17.72 17.47 17.07 16.534 16.809 16.014 17.18 17.629 WALL 0.198 0.367 0.456 0.575 0.439 0.692 0.562 0.937 1.083 0.536 PSI 43 80 100 125 100 160 100 100 235 117.5 O.D. 20.4 20 20 20 20 21.6 20" I.D. 19.962 18.97 18.37 18.743 17.814 19.03 WALL 0.219 0.488 0.769 0.593 1.031 1.2 PSI 43 100 160 100 100 235 O.D. 22.047 22.047 22.047 22.047 21" I.D. 21.12 20.89 20.59 20.783 WALL 0.432 0.538 0.678 0.632 PSI 80 100 125 117.5 O.D. 24.803 24.803 24.803 24 24 24 24 24.8 2 I.D. 23.76 23.5 23.17 22.748 22.043 22.54 21.418 23.381 WALL 0.486 0.605 0.763 0.585 0.923 0.687 1.218 0.711 PSI 80 100 125 100 160 100 100 117.5 Prices effective January 1, 2013

Schumacher Irrigation, Inc. 205 4th Street PO Box 289 Platte Center, NE 68653 USA Change Service Requested PRESORTED BOUND PRINTED MATTER U.S. Postage Paid Platte Center, NE Permit No. 5 Irrigation and Liquid Handling Solutions 800.246.3685 or 402.246.3685 Fax: 402.246.2072 irrigate@schumacherirrigation.com www.schumacherirrigation.com Effective January 1, 2014 All prices are subject to change without notice.