LED Technology Unrivalled lifespan of up to 100,000 hours together with low power consumption and resistance to high levels of shock and vibration make LEDs the ideal light source for emergency lighting. Their compact size allows them to be used in a wide range of applications from surface mount flashing lamps to rotating beacons. Evolution Design The Evolution range is Australia s lowest profile lightbar to include rotators, measuring only 108mm in total height. The Evolution and Blaze range has the capacity to incorporate a wide range of technologies along side our outstanding Free-form optics. Our manufacturing department are able to integrate optional strobes, alley lights, illuminated signage, LEDs and worklamps into any Evolution lightbar allowing for virtually unlimited build combinations. Hybrid Drive Patented Hybrid Drive technology no gears, no belts, no brushes to wear out. Vision Alert Rotating LED products avoid problems typically found in gear or belt driven beacons by using a direct-drive stepper motor. A direct-drive stepper motor has much greater reliability than a brushed DC motor with either a gear or belt assembly, because the only moving parts are the shaft and rotor which are supported by two sealed bearings. The stepper motor uses magnetic induction to rotate the rotor and shaft so there are no gears to slip or belts to break and no electrical brushes or other contacts to wear out.
LED Blaze 22 Combo Blaze 23 Blaze 24 Blaze Spare Parts 25 Reflex LED 26 Rotating LED Mini-Bar 27 Evolution 28 Evolution Spare Parts 31 Evolution Lightbar Options 32 LED Lightbars 34
LED Blaze 6K1.AA00 Low profile aerodynamic styling. Low current draw. Latest high output LED technology. Robust polycarbonate base and lens. Available in 6 lens colours. Dual colour combinations available upon request. Available with clear lens and coloured LEDs. Magnetic version 2600mm cord length - plug fits standard cigar/din socket. to operation. @ @ Current Draw Per Module : 0.35A 0.175A Voltage : 12- Light Source : LED Mount : 2 x 13mm Bolts / Magnetic Lens : Base : 4 Module - Corner 4 Module - Front / Rear 6 Module 8 Module 400mm 208mm 240mm 20mm 108mm LED Blaze - 2 Bolt Amber Blue Green Red Red/Blue 4 Module - Corners 6J1.AA00 6J1.AA10 6J1.AA40 6J1.AA50 6J1.AA70 4 Module - Front/Rear 6M1.AA00 6M1.AA10 6M1.AA40 6M1.AA50 6M1.AA70 6 Module 6L1.AA00 6L1.AA10 6L1.AA40 6L1.AA50 NA 8 Module 6K1.AA00 6K1.AA10 6K1.AA40 6K1.AA50 6K1.AA70 300mm free length of cable 400mm 208mm 15mm 108mm LED Blaze - Magnetic Amber Blue Green Red Red/Blue 4 Module Corners 6J1.AA00.M 6J1.AA10.M 6J1.AA40.M 6J1.AA50.M 6J1.AA70.M 4 Module Front/Rear 6M1.AA00.M 6M1.AA10.M 6M1.AA40.M 6M1.AA50.M 6M1.AA70.M 6 Module 6L1.AA00.M 6L1.AA10.M 6L1.AA40.M 6L1.AA50.M NA 8 Module 6K1.AA00.M 6K1.AA10.M 6K1.AA40.M 6K1.AA50.M 6K1.AA70.M Cord extends to 2600mm length, plug fits standard cigar/din socket 22
Rotators and LEDs able to be switched independently. Switching rotators off significantly reduces current draw. Incorporating high output LED technology. Advanced Free-form optics. Low profile aerodynamic styling. Available in 6 lens colours. Dual colour combinations available upon request. Robust polycarbonate base and lens. LEDs Only Rotators Only Max. Current Draw : 0.7A @ 9.2A @ Light Source : LED 2 x H1 Bulb Flash Rate : 160FPM Mount : 2 x 13mm Bolts Lens : Base : Wire Length : 300mm 601.AA01.1AAA Combo Blaze 400mm 240mm 20mm 108mm 208mm 1 Module Uni-Directional 2 Module Uni-Directional Combo Blaze - Uni-Directional Amber Blue Green Red Red/Blue to front Red/Blue to rear 2 LED 601.AA01.1AAA 601.AA11.1AAA 601.AA41.1AAA 601.AA51.1AAA 601.AA71.1AAA 601.AA71.ZAAA Modules 601.AA02.1AAA 601.AA12.1AAA 601.AA42.1AAA 601.AA52.1AAA 601.AA72.1AAA 601.AA72.ZAAA 1 LED Module 601.AA01.2AAA 601.AA11.2AAA 601.AA41.2AAA 601.AA51.2AAA NA NA 601.AA02.2AAA 601.AA12.2AAA 601.AA42.2AAA 601.AA52.2AAA NA NA 2 Bolt 1 Module Uni-Directional 2 Module Uni-Directional 400mm 240mm 20mm 108mm 208mm 2 Module Multi-Directional 4 Module Multi-Directional Combo Blaze - Multi-Directional 4 LED Modules 2 LED Modules Amber Blue Green Red Red/Blue 601.AA01.1ZAA 601.AA11.1ZAA 601.AA41.1ZAA 601.AA51.1ZAA 601.AA71.1ZAA 601.AA02.1ZAA 601.AA12.1ZAA 601.AA42.1ZAA 601.AA52.1ZAA 601.AA72.1ZAA 601.AA01.22AA 601.AA11.22AA 601.AA41.22AA 601.AA51.22AA NA 601.AA02.22AA 601.AA12.22AA 601.AA42.22AA 601.AA52.22AA NA 23
Blaze Advanced Free-form optics. Strobe option also available. Low profile aerodynamic styling. Two bolt fixing option with all cables passing through one outlet. Robust polycarbonate base and lens. Available in 6 lens colours. Dual colour combinations available upon request. Magnetic version 2600mm cord length - plug fits standard cigar/din socket. 601.AA01.M Strobes Only Rotators Only Max. Current Draw : 3.7A @ 8.7A @ Light Source : 2 x Xenon Tube 2 x H1 Bulb Flash Rate : 160FPM Mount : 2 x 13mm Bolts / Magnetic Lens : Base : 400mm 208mm 240mm 20mm 108mm Blaze - 2 Bolt Amber Blue Green Red Red/Blue 601.AA01 601.AA11 601.AA41 601.AA51 601.AA71 601.AA02 601.AA12 601.AA42 601.AA52 601.AA72 Strobe 10-48V 641.AA00 641.AA10 641.AA40 641.AA50 641.AA70 300mm free length of cable Mag70 MAX 400mm KM/H 208mm 15mm 108mm Blaze - Magnetic Amber Blue Green Red Red/Blue 601.AA01.M 601.AA11.M 601.AA41.M 601.AA51.M 601.AA71.M 601.AA02.M 601.AA12.M 601.AA42.M 601.AA52.M 601.AA72.M Strobe 10-48V 641.AA00.M 641.AA10.M 641.AA40.M 641.AA50.M 641.AA70.M Cord extends to 2600mm length, plug fits standard cigar/din socket 24
Blaze Spare Parts Lenses Part No. Colour 910381 Amber 910383 Green 910384 Red 910385 Blue 910386 Clear 910389 Magenta Spares Part No. Description 999557 Module no bulb 910336 Reflector only 905077 Mirror 67711010 Cigar Plug 64150 H1 Bulb -, 55W 64155 H1 Bulb -, 70W 999223 Strobe Tube 945035 Drive Belt - Flat 920004 Bulb - Clip 25
Reflex LED Ultra low profile Blaze bar available in two mounting options. Low current draw. Multiple flash patterns including Double, Quad, Quint, Simulated Rotate and Random. Incorporating latest high output LED technology. Magnetic version 4300mm cord length - plug fits standard cigar socket. Robust base and lens. to operation. 3 year warranty. Voltage : 12- Maximum Current Draw : 2.7A @ Flash Patterns : 18 Mount : 4 x M5 Bolts / Magnetic Lens : Base : ABS Operating Temperature : -30 C to + 50 C Light Source : 8 x 3 LED Modules 381mm 131mm 228mm 62mm 322mm Reflex LED - 4 Bolt Amber 12-5K1.AA00 300mm free length of cable. Replacement amber lens: 910501 Supplied with fitting hardware. 381mm Mag70 MAX KM/H 228mm 18mm 62mm Reflex LED - Magnetic Amber 12-5K1.AA00.M Cord extends to 4300mm length, plug fits standard cigar socket. Replacement amber lens: 910501 26
True rotating LED. Heavy duty, virtually unbreakable. Patented Hybrid Drive technology. No gears, no belts, no brushes. SAE Class 1 rated output. Die-cast metal base. Environmentally sealed - IP67. LEDs rated to 50,000 hours of operation. Low current draw. UV hard coated polycarbonate lens. to operation. 5 year warranty. Voltage : 12- Current Draw : 2.6A @ 1.3A @ Flash Rate : 120FPM (per rotator) Mount : 4 x M5 Bolts Lens : Base : Die-cast Approvals : SAE J845 Class 1 Ingress Protection : IP67 Operating Temperature : -30 C to + 50 C Light Source : 16 x 3W LED Wire Length : 300mm Rotating LED Mini-Bar Rotating LED Technology Patented Hybrid Drive technology no gears, no belts, no brushes to wear out. Vision Alert Rotating LED products avoid problems typically found in gear or belt driven beacons by using a direct-drive stepper motor. Rotating Light Output. The light emitted from the 8 LEDs is collimated into a beam that shines straight up from the base. A double sided mirror is mounted to the shaft of the directdrive stepper motor at 45º to intercept the beam and is rotated in a 360º circle to sweep the beam much like a standard halogen rotator. Longer life of LEDs over alternative lighting. By default LEDs provide a longer working life and greater resistance to vibration over alternative forms of lighting. Lower current draw from LEDs. LEDs require less current draw to provide an equal or greater light output compared to alternative lighting technologies. Rotating LED Mini-Bar 2.6A @ Blaze Halogen Rotating 8.7 A @ 160mm 147mm 101mm 338mm 323mm 109700 Rotating LED Mini-Bar - 4 Bolt Amber Red/Blue 12-109000 109700 Supplied with fitting hardware including rubber shock mounts Red/Blue model supplied with clear lens 27
Evolution Virtually unlimited build combinations to your specification. Superior visibility. Rotating and LED versions available. Rotating reflector incorporating Free-form optics. Lowest profile lightbar available to include rotators only 108mm in height. Proven dual voltage belt drive, incorporating whisper quiet rotators. All lightbars supplied with permanent bolt down mounting kit. Assembled in Australia. Lens : Base : Height : Harness Length : Aluminium 108mm 3000mm 108mm Rotator LED Module Illuminated Centre Mirror 200mm Evolution Lightbar Vehicle Application Guide Application Small Passenger vehicles Medium/Large Passenger vehicles 4WD vehicles Body Trucks Larger Trucks/Semi s etc Special Application Bar Length 570mm 742mm 1000mm 1212mm 1372mm 1524mm 1829mm All Evolution lightbars are supplied standard with permanent bolt-down mounting kits. For vehicle specific mounting brackets refer to page 31. 28
Evolution - 570mm Rotators x 2 Amber 600.AA01.AAAA 600.AA02.AAAA Evolution - 742mm LED Modules x 4, Rotators x 2 Amber 602.0a01.1zaa 602.0a02.1zaa Rotators x 2 Amber 602.0A01.AAAA 602.0A02.AAAA Evolution - 1000mm LED Modules x 4, Rotators x 3 Amber 663.0a01.1zaa 663.0a02.1zaa LED Modules x 4, Rotators x 2 + Illuminated Centre Amber 603.3a01.1zaa 603.3a02.1zaa Rotators x 3 Amber 663.0A01.AAAA 663.0A02.AAAA Rotators x 4 Amber 623.0A01.AAAA 623.0A02.AAAA Rotators x 2 + Illuminated Centre Amber 603.3A01.AAAA 603.3A02.AAAA 29
Evolution - 1212mm LED Modules x 4, Rotators x 4 Amber 624.0a01.1zaa 624.0a02.1zaa LED Modules x 8, Rotators x 2 + Illuminated Centre Amber 604.3a01.z1aa 604.3a02.z1aa LED Modules x 4, Rotators x 4 + Illuminated Centre Amber 624.3a01.1zaa 624.3a02.1zaa Rotators x 4 Amber 624.0A01.AAAA 624.0A02.AAAA Rotators x 2 + Illuminated Centre Amber 604.3A01.AAAA 604.3A02.AAAA Rotators x 4 + Illuminated Centre Amber 624.3A01.AAAA 624.3A02.AAAA Evolution - 1372mm LED Modules x 4, Rotators x 4 Amber 628.0a01.1zaa 628.0a02.1zaa LED Modules x 8, Rotators x 2 + Illuminated Centre Amber 608.3a01.z1aa 608.3a02.z1aa LED Modules x 4, Rotators x 4 + Illuminated Centre Amber 628.3a01.1zaa 628.3a02.1zaa Rotators x 4 Amber 628.0A01.AAAA 628.0A02.AAAA Rotators x 2 + Illuminated Centre Amber 608.3A01.AAAA 608.3A02.AAAA Rotators x 4 + Illuminated Centre Amber 628.3A01.AAAA 628.3A02.AAAA 30
Evolution - 1524mm LED Modules x 8, Rotators x 4 Amber 625.0a01.z1aa 625.0a02.z1aa LED Modules x 8, Rotators x 4 + Illuminated Centre Amber 625.3a01.z1aa 625.3a02.z1aa Rotators x 4 Amber 625.0A01.AAAA 625.0A02.AAAA Rotators x 4 + Illuminated Centre Amber 625.3A01.AAAA 625.3A02.AAAA Evolution - 1829mm LED Modules x 8, Rotators x 6 Amber 6w6.0a01.z1aa 6w6.0a02.z1aa LED Modules x 8, Rotators x 4 + Illuminated Centre Amber 626.3a01.z1aa 626.3a02.z1aa Rotators x 4 Amber 626.0A01.AAAA 626.0A02.AAAA Rotators x 6 Amber 6W6.0A01.AAAA 6W6.0A02.AAAA Lenses Part No. Colour 910290 Amber 910291 Din. Blue 910292 Blue 910293 Opal 910295 Green 910296 Red 910297 Clear All lenses are supplied pre-cut to required length. Spares Part No. Description 999557 Module no bulb 910336 Reflector only 910489 Mirror 64150 H1 Bulb -, 55W 64155 H1 Bulb -, 70W 999223 Strobe Tube 920004 Bulb - Clip 945016 Synchro Belt 945035 Drive Belt - Flat 31
Lightbar Options Evolution Lightbar Options The Evolution Lightbar range has numerous options available to incorporate into any of the standard lightbars. These are just a few of the options available from Vision Alert. Please refer to your local Vision Alert reseller if you have a requirement not shown here or elsewhere in this catalogue. Evolution lightbars are assembled in Australia. Programmable Switch Panel Programmable Switch Panel available to control up to 8 separate functions. The switch panel connects to the lightbar via a single 3 core CAN data cable, simplifying installation. For more information see Switches Relays 2011 catalogue. Warning Modules Warning modules in rotator and LED versions to suit all lightbars. Three LED high output modules available in different colours. 32
Lightbar Options Alley Lights Twin 35 Watt halogen dichroic lamps situated at ends of lightbar dispersing light to sides of vehicles. Halogen Lamps Forward and rear facing halogen lamps providing continuous illumination or alternating wig-wag flash patterns. Strobe Lamps Forward or rear facing directional strobe lamps. LED Message Display Preset LED message display with in-cab controller. For custom messages please see reseller for details. Signage Custom lettering to suit individual requirements. For individual company logos please see reseller for details. 33
LED Lightbars 10-3AA1-12-00 Designed and manufactured in Australia. lens aluminium extrusion for high durability. 360 light output, increased vertical dispersion. Low current draw. Low aerodynamic profile. LEDs rated to 100,000 hours of operation. Lens : Base : Aluminium Height : 10 Series 112mm 15 Series 53mm 10 15 Series contain 4 LEDs per module 10-3AA1-12-00 385mm 10 Series - 1200mm LED Modules x 12 Amber 10-3AA1-12-00 10-3AA2-12-00 1200mm 385mm 10 Series - 1590mm LED Modules x 16 Amber 10-6AA1-16-00 10-6AA2-16-00 1590mm 34
15-1AA1-08-00 15 Series - 460mm LED Modules x 8 Amber 15-1AA1-08-00 15-1AA2-08-00 305mm 460mm 15-7AA1-12-00 15 Series - 1240mm LED Modules x 12 Amber 15-7AA1-12-00 15-7AA2-12-00 305mm 460mm 15 Series - 1500mm LED Modules x 16 Amber 15-9AA1-16-00 15-9AA2-16-00 305mm 1500mm LED Lightbar Vehicle Application Guide Application Small Passenger vehicles Medium/Large Passenger vehicles 4WD vehicles Body Trucks Larger Trucks/Semi s etc Special Application Bar Length 460mm 1200mm 1240mm 1500mm 1590mm All 10 15 Series lightbars are built to order and as such lead times apply All 10 15 Series lightbars are supplied standard with permanent mounting feet. Vehicle specific mounting brackets available on request. 35