Product Catalog

Product Catalog 2013-2014

Applications Telecommunications Oil and Gas Lighting Security and Instrumentation Transportation and Traffic Railroad Signaling Leisure - Caravan and Boating Rural Electrification and Solar Home Systems Residential Power Sources Solar Hybrid (PV + Second Energy Source) Hydro Small Wind

Since 1995, Morningstar s controllers and inverters have been helping provide standalone, solar electric power to many rural and remote communities, mobile and marine systems, industrial system installations, and commercial applications around the world. Our products are integral power electronic components in more than 2 million off-grid photovoltaic power systems. Morningstar s controllers and inverters are renowned for their robust thermal, mechanical and electronic circuitry design; their high quality and outstanding reliability; long operating life and dependable performance. Our products get the job done when utility power is unavailable, unreliable or cost-prohibitive. Telecommunications Oil and Gas Small- and Large-sized Lighting Installations Security and Instrumentation Transportation and Traffic Railroad Signaling Leisure - Caravan and Boating Rural Electrification and Solar Home Systems Residential Our Mission and Products Morningstar s products have been recognized in international photovoltaic (PV) markets amongst the most advanced and highest quality products available. Our mission is to be the global solar controller and inverter leader, with emphasis on quality, reliability, performance and customer focus. Our customers can count on Morningstar s products to complement their off-grid product portfolio to maximize their PV system s efficiency, performance and reliability as well as to optimize the overall health of their PV system s batteries. Industry Leading Quality and Reliability: Our products exceed all other solar controllers and inverters in resistance and reliability against extreme environments, corrosion, lightning surges and harsh ambient operating temperatures. In addition, our fieldproven products operating life is more than twice the industry average. Value and Innovation: We are renowned for delivering the industry s best overall customer value. Our advanced PWM and MPPT solar controllers optimize battery health for extended capacity and a longer operating life, lower overall system costs and maximum energy harvest. Simplicity and Customer Focus: Our simple-to-use products and customer-focused support includes multi-lingual product documentation, detailed operation and installation manuals, phone and web-based technical support as well as a variety of user and installation friendly product features. Long Term Consistency: Since our founding in 1993, our strategy, ownership and management have been unchanged. We are focused on long-term stability and building high-quality, reliable products that outperform the competition, are built to last and can be trusted to enhance our customers off-grid PV installations. Our Distribution Channels Supporting our global distribution network has been our #1 priority for more than 20 years. Morningstar s products are marketed through 231 highly qualified PV distributors in more than 90 countries. Our authorized distributors are typically the leading PV distributors in their respective countries. We do not sell directly to dealers or end users. We direct all resellers, dealers and end users to our distributor partners. Our authorized distributors are a vital part of the Morningstar marketing team and have become our long-term business partners. 1

A World of Industry Applications Morningstar controllers and inverters have been a vital component in a myriad of off-grid PV systems around the world since 1995. We are happy and proud to help bring clean, dependable solar electric power to the four corners of the world. Our Advantages Leadership - more than 2 million controllers installed in 112 countries around the world in numerous off-grid PV applications. Global Presence - our products are available from 231 authorized Morningstar distributors in more than 90 countries. Quality and Reliability - helping our customers extend overall system life while reducing overall total cost of system ownership. Our controllers and inverters have set new standards in performance, innovative features, quality and reliability. Our field-proven products are delivering more than twice the industry s average operating life. Expected 15+ year operating life. Our products are manufactured in a fully automated world-class ISO 9001 facility. Our manufacturing facilities are CNS 15506, ROHS and REACH compliant. They are also classified as Class I sites and are certified to the international management standards ISO 14001 and OHSAS 18001. Our Quality Control processes include 100% functional testing on every product using the latest computerized test equipment and processes. Innovation - delivering products our customers can count on to complement their off-grid product portfolio and maximize their system efficiency and reliability. In 1995, we introduced our ProStar controller, the world s first PV controller with a PWM (Pulse Width Modulation) charging algorithm. PWM vastly improved battery charging and resulted in increased battery capacity and useful life. Since this Morningstar innovation, the global PV community has accepted the superiority of PWM battery charging. In 2008, we developed and introduced our TrakStar Maximum Power Point Tracking (MPPT) advanced control algorithm technology. TrakStar maximizes the energy harvested from the solar array into the battery. This innovation has made both the SunSaver MPPT and the TriStar MPPT the world-leading MPPT solar controllers. Long Term Consistency and Customer Focus - since our founding in April 1993, our strategy, ownership and management have been unchanged. We are focused on long-term stability and building high-quality, reliable products that: Outperform the competition Are built to last Can be trusted to complement our customers off-grid PV installations Value - we are renowned for delivering the industry s best overall customer value. 2

20+ Years of Invention and Innovation Firsts 1995 1997 1993 Morningstar Founded 1995 ProStar Mid-Range Controller 1996 SunSaver Controller 1997 Morningstar awarded a patent for a highly effective battery charging algorithm, based on true PWM switching and constant voltage charging 1999 SunGuard Single Module Controller 1999 SunLight Solar Lighting Controller ProStar Gen 1 Introduction PWM Patent 2001 ProStar (Gen 2) Mid-Range Controller 2003 2006 2008 2004 SHS Controller for Solar Home Systems 2006 SureSine 300W DC-to-AC Pure Sine Wave Inverter 2003 TriStar 3-Function Controller 2006 SunKeeper Junction Box Mounted Controller TriStar Introduction 2007 SunSaver Duo 2-Battery Controller with Remote Meter SureSine Introduction TrakStar Introduction 2008 2009 2008 Morningstar introduced the TrakStar advanced Maximum Power Point Tracking algorithm technology delivering the industry s best-in-class peak solar array efficiency rating 2009 TriStar MPPT Controller with TrakStar Technology 2011 SunSaver (Gen 3) Controller 2008 SunSaver MPPT Controller with TrakStar Technology 2012 SHS Night Light Controller for Solar Home Systems SunSaver MPPT Introduction TriStar MPPT Introduction 2013 TriStar MPPT 600V and Ground Fault Protection Device Introductions 3

SunSaver Controller 6A or 10A or 20A at 12V or 24V Controllers 12 TriStar MPPT 600V Controller 60A at up to 600Voc SunSaver Duo Controller 25A at 12V MPPT CONTROLLERS 7 13 TriStar MPPT Controller 45A or 60A at up to 150Voc SunKeeper Controller 6A or 12A at 12V 8 14 SunSaver MPPT Controller 15A at 12V or 24V SunLight Controller 10A or 20A at 12V or 24V Table of Contents PWM CONTROLLERS TriStar Controller 45A or 60A at 12-48V ProStar Controller 15A or 30A at 12/24V or 48V 9 10 SunGuard Controller 4.5A at 12V 14 15 SHS and SHS Night Light Controllers 6A or 10A at 12V 4 11 15

Relay Driver (RD -1) Inverters and Accessories 19 SureSine Inverter 300 W; 12 Vdc input, 115 or 220 Vac output MeterHub TM (HUB -1) 16 19 Ground Fault Protection Device Off-grid and on-grid PV safety device Remote Sensor (RTS) 17 19 TriStar Meter-2-600V (TS-M-2-600V) TriStar Meter-2 (TS-M-2) PC MeterBus Adapter (MSC) Remote Meter (RM-1) 18 TriStar Remote Meter-2 (TS-RM-2) 18 18 20 EIA-485 / RS-232 Adapter (RSC-1) DIN Rail Clips (DIN-1) 20 20 Table of Contents 5

6 TrakStar Overview MORNINGSTAR S TRAKSTAR MPPT TECHNOLOGY The Best-in-Class MPPT Technology Morningstar s innovative TrakStar Maximum Power Point Tracking (MPPT) Technology is an advanced control algorithm that maximizes the energy harvest from the solar array into the battery under all operating conditions. This technology innovation is used in Morningstar s SunSaver MPPT and TriStar MPPT controllers and has resulted in both becoming the world-leading MPPT solar controllers. Morningstar s TrakStar MPPT Technology With Morningstar s TrakStar Technology, fast changing maximum power points are quickly tracked during shading conditions or when using mixed module arrays. When power levels change significantly, Morningstar s MPPT controllers are able to quickly respond to find the true maximum power point and avoid getting stuck on a local maximum. Our TrakStar Technology: Optimizes solar array operation by differentiating global (total) maximum power operating points from local ones during shading or mixing of solar modules Provides excellent performance at sunrise and low insolation levels Delivers the industry s highest peak power efficiency rating: 97.5% - TriStar MPPT 600V Controller 99% - TriStar MPPT Controller 97.5% - SunSaver MPPT Controller Performs very rapid sweeping of the solar array I-V curve over the whole converter s operating range at flexible and adaptive time intervals Sweeps from the battery voltage to the open circuit voltage of the array in less than a second for the TriStar MPPT and SunSaver MPPT controllers and in less than one tenth of a second for our new TriStar MPPT 600V controllers TrakStar Advantages Morningstar s TrakStar MPPT tracking algorithm provides more accurate and faster performance, which consistently operates the PV array at a real maximum power point. Morningstar s MPPT controllers deliver high conversion efficiency at all power levels. Significantly better in conversion efficiency at lower output levels than similar competing products Substantially higher energy production at higher output levels than similar products Our MPPT controllers feature robust thermal and mechanical design (no fans or frequently moving parts). This, together with our passive convection cooling heatsinks, makes our controllers the industry s quietest and most reliable while still exhibiting the lowest self-consumption. Morningstar s MPPT controllers deliver better production at higher ambient temperatures and will not reduce power or turn off at higher temperatures. Furthermore, our MPPT controllers keep the batteries at the highest state-of-charge (SOC), resulting in better battery health and longer life. A higher SOC equates to better PV system autonomy and more time before a low voltage disconnect. To Learn more about Morningstar s TrakStar MPPT Technology, visit: www.morningstarcorp.com/trakstar

7MPPT Controllers TriStar MPPT 600V Controller 60A at up to 600Voc Product shown includes optional meter and DC Disconnect Box. -40 C to +45 C -40 F to +113 F Power terminals 2.5 mm 2 35 mm 2 14 AWG 2 AWG Standard Box DC Disconnect Box Standard Box DC Disconnect Box 9.0 kg / 19.8 lbs. 12.8 kg / 28.1 lbs. 39.2 x 22.1 x 14.9 cm 15.4 x 8.7 x 5.9 in 54.2 x 22.1 x 14.9 cm 21.4 x 8.7 x 5.9 in 5 years ETL Listed [UL-1741 and Canadian CSA C22.2 No. 107.1.01] EMC Compliance Immunity: EN61000-6-2:2005 Emission: EN55022:2007 Safety: EN60335-1:2002 and EN60335-2-29:2005 FCC Class B Part 15 Compliant U.S. National Electrical Code (NEC) Compliant Manufactured in a Certified ISO 9001 Facility The TriStar MPPT 600V charge controller accepts PV array or wind turbine input up to 600 Voc. It features an advanced digital signal processor and utilizes Morningstar s TrakStar MPPT Technology to harvest the maximum available energy from the solar array s or wind turbine s peak power point within the controller s operating range. This high speed processing technology and control methodology enable the TriStar MPPT 600V charge controller to sweep from the array s or wind turbine s Voc to the battery voltage faster than any competing MPPT controller on the market - in less than one tenth of a second! The TriStar MPPT 600V charge controller s high voltage capability and flexible design also make several typical application scenarios possible: Off-grid PV systems greater than 150 Voc with long wire runs from the array to the controller New installation grid-tie PV systems with battery back-up Retrofitting string PV inverter systems to later add battery back-up without changing the PV array configuration Battery-based Wind systems The TriStar MPPT 600V charge controller: Delivers the industry s best-in-class power efficiency Uses Morningstar s advanced 4-stage charging algorithm to optimize battery health Features extensive system networking, monitoring and communications Is optimized for harsh environments and equipped with extensive electronic protections. Offers superior lightning protection Is engineered with a robust thermal and mechanical design to deliver the highest reliability and excellent performance TriStar MPPT 600V TS-MPPT-60-600V-48 TS-MPPT-60-600V-48-DB Peak Efficiency 97.5% 97.5% Maximum Battery Current 60A 60A Nominal Solar Input 3200Wp 3200Wp Maximum Input Voltage 600V 600V Nominal System Voltage 48 Vdc 48 Vdc DC Disconnect Box NO STANDARD Battery Operating Voltage Range 16-72 Vdc 16-72 Vdc Input Operating Voltage Range 5-525 V 5-525 V Options Ethernet STANDARD STANDARD DC Disconnect Box* NO STANDARD Ground Fault Protection Device YES YES (GFPD-600V) MeterHub (HUB-1) YES YES Relay Driver (RD-1) YES YES Meters (On-Board or Remote) TriStar Meter-2-600V YES YES (TS-M-2-600V) TriStar Remote Meter-2 YES YES (TS-RM-2) Remote Sensor (RTS)** STANDARD STANDARD * The grounded DC Disconnect Box that includes a 600 Vdc PV disconnect and 48 Vdc battery disconnect as well as a positive pole battery breaker; four (4) bus bars (one for each: PV +/-, battery +/-); two (2) standard 35mm DIN rails; and internal barriers between the high voltage PV and low voltage battery wiring. ** The RTS is shipped standard with the TS-MPPT-600V.

8 MPPT Controllers TriStar MPPT Controller 45A or 60A at up to 150Voc Product shown includes optional meter. Terminal TS-MPPT-45 TS-MPPT-60-40 C to + 45 C -40 F to +113 F 35 mm 2 / 2 AWG 4.5 kg / 9.5 lbs. 5.0 kg / 11 lbs. 35.0 x 18.2 x 18.3 cm 14.0 x 7.2 x 7.3 in 5 years The TriStar MPPT with TrakStar Technology is an advanced maximum power point tracking controller for off-grid solar systems up to 3kWp. The TriStar MPPT controller is the ideal choice for industrial, commercial and consumer PV system installations. Maximizes Energy Harvest Better peak power tracking than other MPPT controllers Very High Efficiency Delivers the industry s highest peak efficiency for off-grid controllers ~ 99% Features Extensive Networking and Communications Enables system monitoring, data logging and adjustability. On-board Ethernet is included on the TS-MPPT-60 TriStar MPPT TS-MPPT-45 TS-MPPT-60 Peak Efficiency 99% 99% Maximum Battery Current 45A 60A Nominal Solar Input 12V Battery Bank 600Wp 800Wp 24V Battery Bank 1200Wp 1600Wp 48V Battery Bank 2400Wp 3200Wp Maximum Open Circuit Voltage 150V 150V Nominal System Voltage 12/24/36 or 48 Vdc 12/24/36 or 48 Vdc IEC 62093 UL 1741 / CSA C22.2 No. 107.1-01 Listed EMC Compliance Immunity: EN61000-6-2:2005 Emission: EN55022:2007 Safety: EN60335-1:2002 and EN60335-2-29:2005 FCC Title 47 (CFR), Part 15 Subpart B for Class B Device Manufactured in a Certified ISO 9001 Facility Options TriStar Meter-2 (TS-M-2) YES YES TriStar Remote Meter-2 (TS-RM-2) YES YES MeterHub (HUB-1) YES YES Ethernet* NO STANDARD EIA-485 Adapter (RSC-1)* YES STANDARD Remote Sensor (RTS)** STANDARD STANDARD Ground Fault Protection Device (GFPD-150V) YES YES * The EIA-485/RS-232 Adapter is an accessory for the TS-MPPT-45 Controller. The TS-MPPT-60 is equipped with an integrated EIA-485 port. On-board Ethernet is included on the TS-MPPT-60. ** The RTS is shipped with the TS-MPPT-*, but will require installation when un-boxed.

9MPPT Controllers SunSaver MPPT Controller 15A at 12V or 24V Terminal -40 C to +60 C -40 F to +140 F 16 mm 2 / 6 AWG 0.7 kg / 1.6 lbs. 20.3 x 8.9 x 7.4 cm 8.0 x 3.5 x 2.9 in 5 years The SunSaver MPPT with TrakStar Technology is an advanced maximum power point tracking controller for off-grid solar systems up to 400Wp. The SunSaver MPPT controller s compact and cost-effective mechanical design, make it the ideal choice for smaller PV systems and for easy installation inside industrial equipment enclosures. Power Optimization Maximum power point tracking provides an optimal match of the solar array to the battery Use of High Voltage Modules In addition to 12V crystalline modules, enables use of high voltage and thin film modules for off-grid battery charging Converts 36V or 24V Arrays Provides a means to use up to a 36V PV array to charge either a 24V or 12V battery Automatic Lighting Control Includes up to four programmable timer sequences for PV lighting applications using Morningstar s MSView TM software SunSaver MPPT SS-MPPT-15L Peak Efficiency 99% Maximum Battery Current 15A Nominal Solar Input 12V Battery Bank 200Wp 24V Battery Bank 400Wp Maximum Open Circuit Voltage 75V Nominal System Voltage 12/24 Vdc UL 1741 / CSA C22.2 No. 107.1-01 Recognized EMC Compliance Immunity: EN61000-6-2:1999 Emissions: EN55022:1994 with A1 and A3 Class B1 Safety: EN60335-1 and EN60335-2-29 (battery chargers) FCC Title 47 (CFR), Part 15 Subpart B for Class B Device Manufactured in a Certified ISO 9001 Facility Options Remote Meter (RM-1) Remote Sensor (RTS) MeterHub (HUB-1) PC MeterBus Adapter (MSC) DIN Rail Clips (DIN-1) Ground Fault Protection Device (GFPD-150V) YES YES YES YES YES YES

TriStar Controller 45A or 60A at 12-48V Product shown includes optional meter. Terminal -40 C to +45 C -40 F to +113 F 35 mm 2 / 2 AWG 2.0 kg / 4.4 lbs. 31.8 x 19.1 x 8.9 cm 12.5 x 7.5 x 3.5 in 5 years The TriStar is a three-function controller that provides reliable PWM solar battery charging, load control or diversion regulation. The TriStar controller is ideal choice for PV, Wind and/or Hydro system installations. Highest Reliability Large heatsink as well as a robust thermal and mechanical design enables operating at full ratings up to 45 C More Information Optional meter displays extensive system and controller information, automatic self-test and reset. Displays in 5 languages Communications Capability RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control Fully Adjustable DIP switch provides user with choice of 7 digital presets. Additional custom settings via RS-232 Extensive Electronic Protections Fully protected against reverse polarity, short circuit, overcurrent and high temperature TriStar TS-45 TS-60 Rated Solar, Load or Diversion Current 45A 60A Nominal System Voltage 12/24/36 or 48 Vdc 12/24/36 or 48 Vdc IEC 62093 UL 1741 / CSA C22.2 No. 107.1-01 Listed EMC Compliance Immunity: EN61000-6-2:2005 Emission: EN55022:2007 Safety: EN60335-1:2002 and EN60335-2-29:2005 FCC Title 47 (CFR), Part 15 Subpart B for Class B Device Manufactured in a Certified ISO 9001 Facility PWM Controllers Options TriStar Meter-2 (TS-M-2) YES YES TriStar Remote Meter-2 (TS-RM-2) YES YES MeterHub (HUB-1) YES YES EIA-485 Adapter (RSC) YES YES Remote Sensor (RTS)* YES YES Ground Fault Protection Device (GFPD-150V) YES YES * Required for temperature compensated charging. Not included. 10

PWM Controllers ProStar Controller 15A or 30A at 12/24V or 48V The Morningstar ProStar is a mid-range charge controller with extensive electronic protections. It is ideally suited for off-grid industrial, commercial and consumer applications, including load sensitive Telecom and Instrumentation system installations. Longer battery life Constant voltage PWM series regulation with 4-stage charging. compensation and choice of 3 battery types. Voltage sense terminals for more accurate battery reading More Information Includes three battery level LED indicators. Optional meter includes a safety disconnect and displays amps, volts, temperature and self-test Extensive electronics protection Avoids use of mechanical fuses. Electronic protections for short-circuit, overload, reverse polarity, high voltage and temperature and reverse current at night Terminal -40 C to +60 C -40 F to +140 F 16 mm 2 / 6 AWG 0.5 kg / 1.1 lbs. 18.5 x 11.4 x 7.1 cm 7.3 x 4.5 x 2.8 in 5 years ProStar PS-15 PS-30 PS-15M-48V Rated Solar Current 15A 30A 15A Rated Load Current* 15A 30A 15A Nominal System Voltage 12/24 Vdc 12/24 Vdc 48 Vdc Manufactured in a Certified ISO 9001 Facility Options Digital Meter YES YES STANDARD Positive Ground NO YES YES Remote Sensor (RTS)** YES YES YES Ground Fault Protection Device (GFPD-150V) YES YES YES * Low voltage disconnect included on all ProStar controllers. ** Installation of the RTS requires some soldering. 11

SunSaver Controller 6A or 10A or 20A at 12V or 24V Terminal -40 C to +60 C -40 F to +140 F 16 mm 2 / 6 AWG 0.4 kg / 0.9 lbs. 18.5 x 6.4 x 7.6 cm 7.3 x 2.5 x 3.0 in 5 years The SunSaver is the world s leading small solar controller for industrial and leisure markets. From the more load sensitive Telecom and Instrumentation systems, to the most environmentally harsh installations of Industrial Oil & Gas and Marine systems Morningstar s SunSaver controllers are the proven choice. Extended battery life PWM 4 stage battery charging with temperature compensation. Sealed/flooded battery select Tropicalization Epoxy encapsulation, marine-rated terminals and anodized aluminum case provide environmental protection Ideal for oil/gas applications Approved for use in hazardous locations: Class 1, Division 2, Groups A-D Additional Features Full electronic protections, 3 battery state LEDs, cover for terminals, dead battery recovery, 15V maximum load SunSaver SS-6-12V SS-6L-12V SS-10-12V Rated Solar Current 6A 6A 10A Rated Load Current 6A 6A 10A Nominal System Voltage 12 Vdc 12 Vdc 12 Vdc Low Voltage Disconnect NO YES NO SunSaver SS-10L-12V SS-10L-24V SS-20L-12V SS-20L-24V Rated Solar Current 10A 10A 20A 20A Rated Load Current 10A 10A 20A 20A Nominal System Voltage 12 Vdc 24 Vdc 12 Vdc 24 Vdc Low Voltage Disconnect YES YES YES YES Hazardous Locations - Class 1, Division 2, Groups A-D UL 1604/ANSI/ISA 12.12.01-2000 (USA) and CSA C22.2 No. 213-M1987 (Reaffirmed 2004) (CANADA) Listed UL 1741 (with terminal cover) Listed* FCC Title 47 (CFR), Part 15 Subpart B for Class B Device Manufactured in a Certified ISO 9001 Facility PWM Controllers Options DIN Rail Clips (DIN-1) YES YES YES YES Ground Fault Protection Device (GFPD-150V) YES YES YES YES * Wire terminal cover included with every SunSaver. 12

PWM Controllers SunSaver Duo Controller 25A at 12V Terminal without Meter with Meter Kit without Meter with Meter Kit -40 C to +45 C -40 F to +113 F 16 mm 2 / 6 AWG 0.6 kg / 1.3 lbs. 1.0 kg / 2.2 lbs. 19.3 x 6.4 x 5.1 cm 7.6 x 2.5 x 2.0 in 28.7 x 22.4 x 5.1 cm 11.3 x 8.8 x 2.0 in 5 years The SunSaver Duo is a two battery solar controller with optional remote meter is the perfect solution for solar electric systems found in RVs, caravans, boats and cottages where there is a unique need to simultaneously charge two separate and isolated battery sources, (e.g., charging the living quarters and engine batteries). Two Battery Charging Solar charge current is shared between two batteries based on a user selectable priority. When one battery is fully charged, all of the charge current flows to the other battery. Highly Reliable Epoxy encapsulation protects the controller against dust and high humidity. Extensive electronic protections, including short circuit, over current and reverse polarity, ensure that the controller will not be damaged by wiring mistakes or overloads. User Adjustable Control parameters may be adjusted using the DIP switch on the controller. Further customization is enabled by connecting to a personal computer and using Morningstar s MSView software. SunSaver Duo SSD-25 SSD-25RM Rated Solar Current 25A 25A Rated Load Current* NONE NONE Nominal System Voltage 12 Vdc 12 Vdc Manufactured in a Certified ISO 9001 Facility Options Remote Meter (RM-1) YES STANDARD Remote Tempurature Sensor (RTS) YES YES PC MeterBus Adapter (MSC) YES YES DIN Rail Clips (DIN-1) YES YES EIA-485 Adapter (RSC-1)** YES YES Ground Fault Protection Device (GFPD-150V) YES YES * There is no load connection on the SunSaver Duo. ** The EIA-485 / RS-232 Adapter can be used in conjunction with the PC MeterBus Adapter to enable these devices to communicate over a 485 network. 13

SunKeeper Controller 6A or 12A at 12V Wire Terminations -40 C to +70 C -40 F to +158 F #8 fork connectors 0.2 kg / 0.4 lbs. 17.8 x 7.6 x 5.1 cm 7.0 x 3.0 x 2.0 in 5 years The SunKeeper solar controller mounts directly to the solar module junction box and eliminates the need for an additional controller housing. Morningstar s SunKeeper controllers are uniquely qualified for use in Oil & Gas Installations where the operating temperature of their internal circuitry is much lower than the auto-ignition temperature of most flammable gases and vapors. They are well sealed and operate at low temperatures without the use of relays, thus preventing the high temperature arching and sparking. High Rated Rated to 70 C to operate in high temperatures at the solar module. No need to de-rate Outdoor Rated Approved for outdoor use without an additional enclosure. IP65, UV resistant case. Epoxy encapsulated electronics and watertight connection to the module junction box Ideal For Oil/Gas Applications Approved for use in hazardous locations: Class 1, Division 2, Groups A-D SunKeeper SK-6 SK-12 Rated Solar Current 6A 12A Rated Load Current* NONE NONE Nominal System Voltage 12 Vdc 12 Vdc Hazardous Locations - Class 1, Division 2, Groups A-D UL 1604/ANSI/ISA 12.12.01-2000 and CSA C22.2 No. 213-M1987 Listed Manufactured in a Certified ISO 9001 Facility Options Remote Sensor (RTS)** YES YES * There is no load connection on the SunKeeper. ** Installation of the RTS to the SunKeeper requires some soldering. PWM Controllers SunLight Controller 10A or 20A at 12V or 24V Terminal -40 C to +60 C -40 F to +140 F 16 mm 2 / 6 AWG 0.3 kg / 0.7 lbs. 18.0 x 6.6 x 4.1 cm 7.1 x 2.6 x 1.6 in 5 years The SunLight is the world s leading solar lighting controller for street and pathway lighting, parking areas, bus stations and signage. Morningstar s SunLight controller features an advanced micro-controller for automatic lighting control functions delivering high reliability, precise lighting control & PWM battery charging. Provides 10 Lighting Options User adjustable for 2 to 10 hours on or for on all night. Unique ON/OFF/ON settings conserve energy and turns light on again for 1 or 2 hours before sunrise. Timer accuracy is within 2 seconds. Easy To install To confirm correct installation, test button turns light on during the day and LED indicates selected lighting option Rugged Industrial Design Epoxy encapsulated electronics, marine rated terminals, and anodized aluminum case SunLight SL-10L-12 SL-10L-24 SL-20L-12 SL-20L-24 Rated Solar Current 10A 10A 20A 20A Rated Load Current* 10A 10A 20A 20A Nominal System Voltage 12 Vdc 24 Vdc 12 Vdc 24 Vdc Manufactured in a Certified ISO 9001 Facility Options DIN Rail Clips (DIN-1) YES YES YES YES Ground Fault Protection Device (GFPD-150V) YES YES YES YES 14 * Low Voltage Disconnect is included in all SunLight Controllers.

SunGuard Controller 4.5A at 12V -40 C to +60 C -40 F to +140 F 0.3 kg / 0.7 lbs. 11.9 x 8.4 x 6.9 cm 4.7 x 3.3 x 2.7 in 5 years The SunGuard is a one module solar controller for professional and leisure markets. Highly Reliable 100% solid state design and epoxy encapsulated for environmental protection. Rated for 25% overloads and no need to de-rate. Extended Battery Life Series design (not shunt) PWM battery charging with temperature compensation. Low self-consumption. Easy To Install Outdoor rated connecting wires for waterproof connection to solar module and battery. SunGuard SG-4 Rated Solar Current 4.5A Rated Load Current* NONE Nominal System Voltage * There is no load connection on the SunGuard. Manufactured in a Certified ISO 9001 Facility 12 Vdc SHS and SHS Night Light Controllers 6A or 10A at 12V The SHS and SHS Night Light are low cost controllers for rural electrification solar home systems*. Low Cost Designed to meet the economic needs of developing country rural markets. The latest electronic technology and high volume automated production resulted in lower costs. High Reliability Built-in electronic fuses ensure that any wiring mistakes during installation will not damage the controller. The printed circuit board is conformally coated for protection against humidity and nesting insects. Easy To Use LED indicators display battery level and system status. All control functions are automatic and require no user adjustments. Auto Lighting Control The Night Light version will automatically turn lights on at dusk and turn off the lights at dawn. Terminal SHS & SHS-NL -25 C to +50 C -13 F to +122 F 6 mm 2 / 10 AWG 0.2 kg / 0.4 lbs. 17.3 x 7.6 x 4.6 cm 6.8 x 3.0 x 1.8 in 2 years SHS** SHS-6 SHS-10 Rated Solar Current 6A 10A Rated Load Current 6A 10A Nominal System Voltage 12 Vdc 12 Vdc SHS Night Light** SHS-NL-6 SHS-NL-10 Rated Solar Current 6A 10A Automatic Lighting Control YES YES Nominal System Voltage 12 Vdc 12 Vdc * Not sold in USA or Canada. ** Low Voltage Disconnect included on all SHS controllers. Manufactured in a Certified ISO 9001 Facility PWM Controllers 15

Inverters SureSine Inverter 300 W; 12 Vdc input, 115 or 220 Vac output The SureSine is a pure sine wave inverter for off-grid solar applications requiring AC power. Applications include rural electrification, telecom, remote homes, RVs, caravans and boats. Improved load operation Pure sine wave provides quality AC equivalent to grid power. Toroidal transformer design generates good wave form throughout the range of input voltages. Handles 200% surge up to 600W. High Reliability No internal cooling fan or other moving parts. Uses epoxy encapsulation, conformal coating, stainless steel hardware and an anodized aluminum enclosure to protect against harsh tropical and marine environments. More Power Available High efficiency and low self consumption maximizes power to the loads. Automatic stand-by reduces consumption during no load conditions. Terminal -40 C to +45 C -40 F to +113 F 35 mm 2 / 2 AWG 5.2 kg / 11.5 lbs. 29.2 x 22.9 x 16.5 cm 11.5 x 9.0 x 6.5 in 2 years SureSine SI-300-115V SI-300-220V Continuous Power Rating 300W @ 25 C 300W @ 25 C Peak Power Rating (10 minutes) 600W @ 25 C 600W @ 25 C DC Input System Voltage 10.0-15.5V 10.0-15.5V Waveform Pure Sine Wave Pure Sine Wave AC Output Voltage (RMS) 115 Vac +/- 10% 220 Vac +/- 10% AC Output Frequency 60 Hz +/- 0.1% 50 Hz +/- 0.1% UL 1741 Listed on 115V-UL version only FCC Title 47 (CFR), Part 15 Subpart B for Class B Device EN 60950-1+A11:2001, rev. 4/4/04 Manufactured in a Certified ISO 9001 Facility Options Remote Meter (RM-1) YES YES PC MeterBus Adapter (MSC) YES YES Relay Driver (RD-1) YES YES EIA-485 Adapter (RSC-1)* YES YES * The EIA-485/RS-232 Adapter can be used in conjunction with the PC MeterBus Adapter to enable the SureSine to communicate over a 485 network. 16

Ground Fault Protection Device Off-grid and on-grid PV safety device Terminal GFPD-150V GFPD-600V GFPD-150V GFPD-600V -40 C to +60 C -40 F to +140 F up to 13mm 2 / 6 AWG 2.0 kg / 4.4 lbs 4.4 kg / 8.9 lbs 26.9 x 12.8 x 11.2 cm 10.6 x 5.1 x 4.4 in 35.7 x 22.1 x 10.6 cm 14.1 x 8.7 x 4.2 in 5 years The Ground Fault Protection Device (GFPD) products are off-grid and on-grid PV safety devices. The GFPD is available in two models, GFPD-150V and GFPD-600V, to support 150V and 600V PV system breaker stacks, respectively. Morningstar s GFPD increases safety and design flexibility in off-grid and on-grid PV systems. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. It is critical to detect any stray current and to interrupt (break) the circuit until safe operation can be restored. A current imbalance between the conductors of a circuit indicates a ground fault. Morningstar s GFPD will detect this condition and break the circuit on both the positive and negative legs. Disconnecting both poles ensures interruption of the ground fault current. Morningstar s GFPD Solution: Maintains the integrity of earth bond for battery and loads Trips at lower fault current with greater accuracy Breaks both conductors in the faulted circuit and completely isolates PV source circuits Does not require an extra warning label at the battery bank as per U.S. National Electric Code requirements Provides design flexibility to meet a wide range of configurations: Positive and negative ground Large and small arrays Makes it easier to locate and troubleshoot ground faults Powered via the PV system s battery bank Equipped with both visual and audible alarms Built to support both single controller and multiple controllers systems: Morningstar s GFPD will only shut off affected controllers, while maintaining the system earth bond. All loads will continue to operate safely with the battery remaining bonded to ground. Multiple controllers and GFPDs can be added on an as-needed basis Ground Fault Protection Device GFPD-150V GFPD-600V Input Voltage 10-72 Vdc 10-72 Vdc Self-Consumption <0.5W <0.5W Ground Fault Threshold Current 300 ma +/- 10% 300 ma +/- 10% Number of Poles 2 2 Maximum Solar Voltage 150V 600V Maximum Solar Current 60A 50A Trip Method Relay Relay Output Trip Signal 12V 12V Mounting Post Size DIN- and Panel-Mount Options DIN- and Panel-Mount Options Nominal System Voltage 12/24/36/48 Vdc 12/24/36/48 Vdc UL 1741 and CSA C22.2 No. 107.1-01 Listed GFPD-150V is UL-489 Listed GFPD-600V is UL-1077 Listed Meets EMC Directives (Immunity, Emissions and Safety) FCC Class B Part 15 Compliant U.S. National Electrical Code (NEC) 690.5 Compliant for use as a GFPD device Manufactured in a Certified ISO 9001 Facility Accessories PRELIMINARY 17

TriStar Meter-2-600V (TS-M-2-600V) On-Board Advanced Digital Display for the TriStar MPPT 600V Controller 2 x 16 character LCD display Compatible with: Mounts to the controller* TriStar MPPT 600V Controller Displays extensive system and controller MeterHub information, logged data, bar graph metering as well as alarms and faults for easy troubleshooting Choice of 5 languages (English, French, German, Portuguese or Spanish) * Replaces stock front faceplate. TriStar Meter-2 (TS-M-2) On-Board Advanced Digital Display for the TriStar and TriStar MPPT Controllers 2 x 16 character LCD display Compatible with: Mounts to the controller* TriStar MPPT Controller Displays extensive system and controller TriStar Controller information, logged data, bar graph metering MeterHub as well as alarms and faults for easy troubleshooting Choice of 5 languages (English, French, German, Portuguese or Spanish) * Replaces stock front faceplate. TriStar Remote Meter-2 (TS-RM-2) Remote Digital Display for the TriStar Family Controllers Compatible with: TriStar MPPT 600V Controller TriStar MPPT Controller TriStar Controller MeterHub The TS-RM-2 provides the same data display as the TS-M-2, except that it ships with 30 meters of cable and a flat faceplate. These features enable convenient mounting away from the controller. Accessories Remote Meter (RM-1) Remote Digital Display for the SunSaver MPPT and SunSaver Duo Controllers as well as SureSine Inverter Compatible with: SunSaver MPPT Controller SunSaver Duo Controller SureSine Inverter Easy to Install and Use Low Self-Consumption Four (4) digit display with custom icons Displays systems information, logged data*, alarms and errors May be mounted in the wall or on the wall with included frame Includes 10 meters of cable *Only available for the SunSaver MPPT Controller. 18

Relay Driver (RD -1) Logic Module for System Control Functions Cost-effective and Highly reliable Compatible with: Fully Programmable TriStar MPPT 600V Controller Advanced Generator Control TriStar MPPT Controller Industrial Design TriStar Controller LED Indicators SunSaver MPPT Controller Four (4) independent relay driver outputs SunSaver Duo Controller (relays not included) SureSine Inverter Used for high/low voltage alarms, load control, MeterHub and generator start Reads digital data inputs from compatible controllers and inverters Reads battery voltage in systems with other controllers MeterHub (HUB -1) Solar Controller Communications Hub Compatible with: TriStar MPPT 600V Controller TriStar MPPT Controller TriStar Controller Relay Driver TriStar Meter-2 TriStar Remote Meter-2 Allows several Morningstar products to communicate over a MeterBus network (maximum 15 devices) In multi-controller systems the TS-M-2, TS-M-2-600V and TS-RM-2 are networkable using Morningstar s MeterHub to allow individual controller data and aggregate system data to be displayed together on a single meter. Enables multiple controllers to share a TriStar Meter or Relay Driver Provides electrical isolation Remote Sensor (RTS) Sends Battery Data to Controllers Compatible with: TriStar MPPT 600V Controller** TriStar MPPT Controller** TriStar Controller* SunSaver MPPT Controller ProStar Controller*** SunSaver Duo Controller SunKeeper Controller*** Improves battery charging by using temperature at the battery for very accurate temperature compensation Recommended for solar systems that experience temperature variations during the year or whenever the temperature at the battery will be more than 5 C (9 F) different than the temperature at the controller * No temperature compensation without RTS. ** No temperature compensation without RTS. The RTS is shipped with the TS-MPPT-* Controller. *** Installation of the RTS to the ProStar and SunKeeper Controllers requires some soldering. Accessories 19

PC MeterBus Adapter (MSC) Converts RJ-11 MeterBus to RS-232 Connector Compatible with: SunSaver MPPT Controller SunSaver Duo Controller SureSine Inverter Used to connect a Morningstar controller or inverter to a PC or other third party serial enabled devices Communications link enables monitoring and logging of data as well as customizing of set points EIA-485 / RS-232 Adapter (RSC-1) Converts RS-232 to EIA-485 Connector Compatible with: TriStar MPPT Controller* SunSaver MPPT Controller** TriStar Controller SunSaver Duo Controller** SureSine Inverter** Relay Driver Allows up to 128 Morningstar products to communicate on the same communications bus and over much greater distances than with RS-232 All data is transmitted via MODBUS protocol Removable four (4) position EIA-485 terminal 9-pin RS-232 connector (male) Status LED for monitoring and diagnostics Molded tabs for attachment to 35mm standard DIN rail RS-232 ribbon cable (not shown) with low-profile connectors * The EIA-485/RS-232 Adapter is an accessory for the TS-MPPT-45 Controller. The TS-MPPT-60 is equipped with an integrated EIA-485 port. ** The EIA-485/RS-232 Adapter can only be used in conjunction with the PC MeterBus Adapter to enable these devices to talk over a 485 network. Accessories DIN Rail Clips (DIN-1) For Installing Controllers and Accessories to DIN Rails Rugged plastic clips match SunSaver and Compatible with: SunLight mounting holes SunSaver MPPT Controller Provide a simple way to install controllers to SunSaver Controller DIN rails SunSaver Duo Controller Enables removal of controllers from DIN rails without removing the clips SunLight Controller Polypropylene clips Fits all 35mm standard DIN rails Mounting screws (M3 x 5mm, black stainless steel) 20

Morningstar Accessory Compatibility Matrix Ground Fault Protection Device (GFPD-600V) DC Disconnect Box TriStar Meter-2-600V (TS-M-2-600V) TriStar Meter 2 (TS-M-2) TriStar Remote Meter 2 (TS-RM-2) Remote Meter (RM-1) Relay Driver (RD-1) MeterHub (HUB-1) (also works with the RD-1,TS-M-2, TS-RM-2) Remote Sensor (RTS) PC MeterBus Adapter (MSC) EIA-485/RS-232 Adapter (RSC-1) (also works with RD-1) DIN Rail Clips (DIN-1) Ground Fault Protection Device (GFPD-150V) TriStar MPPT 600V 5 1 MPPT Controllers TriStar MPPT 1 2 MPPT 4 SunSaver TriStar ProStar 3 PWM Controllers SunSaver SunSaver Duo 4 SunLight SunKeeper 3 Inverters SureSine 4 1. The RTS is shipped with the TS-MPPT-*, but will require installation when un-boxed. 2. The EIA-485/RS-232 Adapter is an accessory for the TS-MPPT-45 Controller. The TS-MPPT-60 is equipped with an integrated EIA-485 port. 3. Installation of the RTS into the ProStar and SunKeeper Controllers requires some soldering. 4. The EIA-485/RS-232 Adapter can be used in conjunction with the PC MeterBus Adapter to enable these devices to talk over a 485 network. 5. Only model TS-MPPT-60-600V-48-DB comes standard with the DC Disconnect Box. It is not an option for model TS-MPPT-60-600V-48.

www.morningstarcorp.com/products Morningstar Corporation is a registered trademark and the Morningstar Name, the Morningstar and TrakStar logos, as well as the TriStar MPPT, TriStar, SunSaver, SunSaver MPPT, ProStar, SureSine, SunSaver Duo, SunKeeper, SunLight, SunGuard, SHS, SHS Night Light, MeterBus, MeterHub, MSView and TrakStar names are all the trademarks of Morningstar Corporation. MODBUS and MODBUS TCP/IP are trademarks of Modbus IDA. Specifications subject to change. 2013 Morningstar Corporation. All rights reserved. ALL.DAT.CATALOG.10/13.EN