AUCTION On Instructions from Alstom Transport following transfer of it s train build activities from it s Washwood Heath Facility to Continental Europe LIVE AND WEBCAST Over 1000 Lots Of Modern High Quality Craneage, Somers Lifts, Machine Tools, Woodworking Machinery, Incinerator, Generator and 1000 s Of Hand Tools At: Leigh Road, Washwood Heath, Birmingham, B8 2YF, UK On: Thursday 12th May 2005 at 10.00am
LIFTING EQUIPMENT Craneage KSR Demag 8330280 2 x 10T SWL Single Girder Portal Crane (2000), 29m Between Rail Centres, 2 x EUDH 525 H20 KV3 4/1 F6 Electric Hoists, Lifting Speed 1.0m/min to 6.3m/min, Cross Travel 5.0m/min to 20m/min, Longitudinal Travel 0 to 40m/min, Crane Control via Radio with Pendant Backup, Lifting Stroke 11.0m, Solid Web Form Construction, Crane Weight 33,500Kg (Drawings and Technical Information Available) Demag 25 Tonne Electric Overhead Travelling Crane, Span 14.5m (approx) (1998, Choice of 2) Demag 20 Tonne Electric Overhead Travelling Crane, Span 60 (approx) (1998, Choice of 3) Demag 15 Tonne Electric Overhead Travelling Crane, Span 50 (approx) (Choice of 2) Demag 10 Tonne Electric Overhead Travelling Crane, Span 60 (approx) Demag 5 Tonne Electric Overhead Travelling Crane, Span 50 & 60 (approx) (Choice of 3) Demag 2 Tonne Electric Overhead Travelling Crane, Span 30 (approx) (Choice of 4) Pelloby 5000Kg x 3,000mm (approx) Swing Jib Crane (1999, Choice of 2) KSR Demag Dual 10 Tonne Portal Crane 2000 Private Treaty Certain items of primary plant are available for sale by Private Treaty/Negotiation in advance of the main auction. The main items considered for this form of sale are: Portal Crane Overhead Cranes Incinerator Generator/ Frequency Converter Somers 22 Tonne Rail Mounted Lifts Track and Sleepers (Alstom have approximately 4 miles of standard gauge track and offers are invited on all/part thereof) Interested Parties contact Sarah Clutterbuck Tel: +44(0)121 236 2880 Email: sarah.clutterbuck@henrybutcher.com or Kevin Sutch +44(0)7774 417226 Email: Kevin.sutch@henrybutcher.com Choice of 20 from 2 to 25 tonnes Demag 25 Tonne EOT Crane Register for the Catalogue Online @
LIFTING EQUIPMENT Choice of 32 pairs Approx. 1999 Somers 22 Tonne SWL Lifts Choice of 2 Choice of 6 Pelloby 5000Kg Jib Crane Hymo Hydraulic Lift Tables Choice of 60 Choice of 4 Range of Safety Steps Master Mover 5-200 Electric Tug Midland Lifting 1 Tonne Jib Crane (Choice of 2) Range of Slings, Chains, Shackles and Spreader Bars Straight Point 10t f x 0.01 Weigh Scales (Choice of 2) Range of Test Weights Lifting and Moving Equipment Somers 22 Tonnes SWL Twin Electric Lifts designed for rail mounting, 3.0m between centres and 1.0m lift height (approx) (Choice of 32 Pairs and approximate year 1999) Somers 8 Tonnes Wheel Free Electric Lifts (Portable) (Choice of 4) Master Mover 5-200 & 5-300 Electric Tugs (Choice of 4) Hymo 4000Kg Hydraulic Lift Tables, 2.6m x 1.0m Table (Choice of 6) Marco 3000Kg Hydraulic Lift Tables, 2.45m x 1.45m Table (Choice of 3) Range of Manual Hydraulic Pallet Trucks, Sack Trucks and Trolleys Machine Workshop Guifil GHE 10-25 Hydraulic Guillotine, 2500mm x 10mm Capacity, Powered Back Gauge (2002) Pearson 103 100 Tonne x 3m Hydraulic Pressbrake with Hibass Light Guards Crefco Unifold 2500mm Powered Box & Pan Folder FJ Edwards 72 x 3 Manual Folder Edwards 4FT16G 48 Treadle Operated Guillotine 60 and 48 Powered Pyramid Bending Rolls Startrite 20V Vertical Bandsaw (Choice of 3) Startrite 24-T-10 Vertical Bandsaw Pedrazzoli SN270 Horizontal Bandsaw with In/Out Feed Sealey Horizontal Bandsaws (Choice of 2) Emmegi 200A, Addison Brown 250 and Hitachi C10FA Mitre Cut Off Saws (Choice of 4) Asquith OD1 4 6 Elevating Radial Arm Drill Elliott 2MR 6 Slotting Machine Cincinnati 207MK Horizontal Milling Machine, 53 x 12 Table and Vertical Milling Head Attachment Bridgeport BRJ Turret Head Milling Machine, 42 x 9 Table, 2 Axis DRO Or telephone +44 (0)20 7098 3701
Webcast Available @ Colchester Triumph 2000 x 50 SS & SC Gap Bed Lathe Pollard 150 Head Twin Spindle In- Line Pillar Drill, to 1920rpm Startrite Mercury 10 Speed Drill Press (Choice of 3) Norton and Sweeney & Blocksidge Flypresses (Choice of 6) Cutmaster Double Ended Grinder, 1800rpm, 320 x 50 x 126mm Wheel Murex Transmig Synergic 350 Mig Welder & Fine Wire Feed West Mig300S Mig Welders (Choice of 2) Cebora Plasma Prof 120 Plasma Cutter Sureweld Plasma Plus 140E Plasma Cutter Cebora Tig Star 250 Tig Welders (Choice of 2) Ancillary equipment to include Record Bench Vices, Metal Work Benches, Racks, Bar Racks, Cabinets, Welding Screens, Fettling Booths, 15 Drawer Tool Cabinets, Drills, Milling Cutters, Reamers, Taps, Dies, Sockets, Screws, Forming Tools, Dividing Heads, Machine Vices, Vee Blocks, Squares etc General Equipment Hydrovane 845 Rotary Vane Compressor HPC Plusair Receiver Mounted Packaged Air Compressor (Choice of 3) Safety Steps (Choice of 40) Retractable Air Hoses (Choice of 25) Air Leakage Testers (Choice of 3) Record N50AV Powered Pipe Thread Cutter Electac Electrostatic Fume Extraction Units (Choice of 4) Enviro Vac ADU1500 Extraction Units (Choice of 20) Huck HP842 Power Rig and Tooling Emhart Tucker PKE60/30 Rivetter Instaspan Mobile Aluminium Scaffolding Towers (Choice of 20) Portable Lighting and Extension Cables Numatic Vacuum Cleaners (Choice of 30) Range of Canteen Tables and Chairs Safety Matting Guilfill GHE 10-25 Hydraulic Guillotine Pearson 103 Pressbrake Crefco Unifold Powered Folder 2002 Bridgeport BRJ Turret Milling Machine Cincinnati 207MK Horizontal Milling Machine Register for the Catalogue Online @
Webcast Available @ Felder K7X Dimension Saw Bench 1998 Tube Bending and Finishing APB CB76 Hydraulic Tube Bender, Max Dia 76mm HM Production ZP-45 Single End Deburring Machines, 250 x 45mm Capacity (Choice of 2) Woodworking Felder K7X Dimension Saw Bench (1998) Felder AD741 Planer Thicknesser (1998) Felder FS900KF Double Sided Belt Linisher (1998) Felder S7 Bobbin Sander (1998) Dewalt DW1150 Planer Thicknesser (1998) Wadkin BZL Wood Turning Lathe Lennartsfors DS300 Disc Sander with Extraction Phillipson Spindle Moulder Elu TGS173 Cut-Off Saw Nutool 12 Speed Drill Press Startrite 20V & 14RF Vertical Bandsaws DCE Unimaster Twin Bag Dust Extraction Units (Choice of 6) 1998 Felder FS900KF Double Sided Linisher Pedrazzoli SN270 Horizontal Bandsaw UNABLE TO ATTEND BID LIVE online with 1998 Felder Serie 7 Bobbin Sander 1998 Choice of 6 1000 s of Items Dewalt DW1150 Planer Thicknesser DCE Unimaster Twin Bag Dust Extraction Variety of Hand Tools Or telephone +44 (0)20 7098 3701
Webcast Available @ Private Treaty Unused New in 2000 1939 Incinerator and Packaging Hogger ASEA 1939 Rail Mounted Generator/Frequency Converter Certain items of primary plant are available for sale by Private Treaty/Negotiation in advance of the main auction. The main items considered for this form of sale are: Portal Crane Overhead Cranes Incinerator Generator/Frequency Converter Somers 22 Tonne Rail Mounted Lifts Track and Sleepers (Alstom have approximately 4 miles of standard gauge track and offers are invited on all/part thereof) Unused Incinerator An Automatically Loaded Waste to Energy Combustion System designed for the disposal of readily combustible packaging, paper, wood and general office waste and converted into heat (Commissioned in 1999 but due to change in manufacturing unused, approximate cost of project 100,000) including: Vecoplan Heavy Duty Shredder, Blade Inlet width 1000mm, can accept mixed wastes including pallets Thelcastle 7.5KW Outfeed Conveyor and Feed to Storage Silo Storage Silo sizes to hold 20 Hours of Waste Feed screw, located below Silo, 1.5m long will transfer waste at the given rate into the incinerator Primary Combustion Chamber, controlled burning of waste, gas fired with Residue Auger to manoeuvre waste along the combustion zone Secondary Combustion Zone, elevates temperature of Waste Gases within an Oxygen Rich Environment to minimise emissions Chimney, one twin wall insulated, directly through the roof Full PLC Control System Drawings and Installation Plans Available Generator/Frequency Converter A Strattens Jarnvagar 1939 Built Track Mounted (Portable) Frequency Converter to Convert 50Hz Electricity to 16 2/3Hz Electricity. In brief this includes; ASEA G1806 & G1810 3MW Rotary Converters, 6.6KV, 3 Phase 50Hz Input, 16KV, Single Phase 16 2/3Hz Output (2 Units, 4000KVA and 3000KW) 11KVA to 6.6KV Transformer 500KVA 16 2/3Hz Auxillary Transformer, Input 16KV Single Phase, Output 1KV Single Phase Test Track and Overhead Lines 2 x 1000 Volt 16 2/3Hz Test Panels Interested Parties contact Sarah Clutterbuck +44(0)121 236 2880 email sarah.clutterbuck@henrybutcher.com or Kevin Sutch +44(0)7774 417226 email Kevin.sutch@henrybutcher.com Register for the Catalogue Online @
Webcast Available @ Choice of 4 Spectra Precision 1470HP Laser level Mecmesin Versa Test Tensile Tester 2002 Electric Hand Tools Hand Tools and Equipment (Over 1000 pieces) Electric and Pneumatic Drills, Saws, Sanders, Screw Drivers, Grinders, Heat Guns, Staplers and Nail Guns Nut Runners Lobster Pneumatic Rivet Guns (Over 300) Hand Rivetters, Crimping Tools (Pneumatic and Hand) Spanners, Socket Sets, Screw Drivers, Clamps, Cutters, Wrenches, Saws Torque Wrenches (Over 100) Calibration and Testing Avery T42B3 25 Tonne Tensile Tester Avery 7107CCG 12000Lbs Tensile Tester Avery 6403 3000Kg Hardness Tester Vickers Hardness Tester Mecmesin Versa Test 2500KN Electronic Tensile Testing Machine, 500mm Effective Travel, 57mm Throat, Speed 12.5 to 500mm/min (2002) Spectra Precision 1470HP Laser Levels (Choice of 4) Alcometers, Coating Gauges, Light Meters, Digital Manometers, Force Gauges, Target Kits, Load Cells, Pressure Meters, Compression Testers, Milliohm Meters, Electronic Scales, Oscilloscopes, PAT Testing Kits, Power Supplies, Plug & Thread Gauges, External and Internal Micrometers, Verniers, Bore Gauges, Straight Edges etc. Pneumatic Rivet Guns Choice of 20 Enviro Air Portable Extraction Unit UNABLE TO ATTEND BID LIVE online with 1000 s of Items General Hand Tools and Inspection Equipment Spanners Or telephone +44 (0)20 7098 3701
Directions Alstom Transport Limited, Leigh Road, Washwood Heath, Birmingham, B8 2YF, UK. Please note that entrance to the site is not from the Leigh Road Reception but is off the A47 Spine Road. From M6 (North). Exit at junction 6 and follow signs for Birmingham NE & Lichfield. Stay on LEFT and go down incline to the roundabout. Take 4th exit onto Lichfield Road (signed City Centre) again staying on the LEFT hand side. At 1st traffic lights turn left into Cuckoo Road, straight on at next roundabout and take 2nd exit at following roundabout (A47). At next roundabout filter left onto Aston Church Road, take 3rd left after scrap yard (Taroni s) onto Washwood Heath Road. Take 3rd left into Drews Lane to a major Crossroads at lights turn left onto Bromford Lane. Remain in left hand lane, going through 1st set of lights. At roundabout take 1st exit onto A47 Heartlands Spine Road. Approx 1/3 mile take the first left turn into the Alstom Auction Site and follow site instructions for parking and registration. From M6 (South). Leave at Junction 6 take immediate right turn on slip road to follow Birmingham NE down to roundabout taking 4th exit. (directions now as per M6 North above) Viewing Wednesday 11th May 2005, 9.00am to 4.30pm and on morning of sale Buyers Premium A buyers premium of 12.5% + VAT is charged to the purchaser. An additional 3.5% + VAT will be charged to Webcast purchasers. Clearance All Lots to be cleared by Thursday 26th May 2005. Please note the Incinerator and the Portal Crane will be allowed a time extension subject to Method Statements and Risk Assessments at the discretion of Henry Butcher. Webcast auction enables you to bid securely in real-time from the comfort of your own computer. To utilise this service, register with Henry Butcher at where you can sign up for this auction. To learn more about how a webcast auction works, please go to the Support section on our homepage and choose Webcast Instructions. Webcast Helpline: +44 (0)20 7098 3793 Hydrovane 845 Compressor Catalogue Request Line: +44 (0)20 7098 3701 Fax: +44 (0)20 7098 3795 email: sales@henrybutcher.com For Further information please contact: Email: sarah.clutterbuck@henrybutcher.com Tel: +44 (0)121 236 2880 36 Great Charles Street, Birmingham B3 3JP Tel: +44 (0)121 236 2880 Fax: +44 (0)121 236 2890 Head Office: New London Bridge House, 25 London Bridge Street, London SE1 9BQ, UK Tel: +44 (0)20 7098 3700 Fax: +44 (0)20 7098 3795 email: sales@henrybutcher.com LOCAL SERVICE GLOBAL REACH GoIndustry Henry Butcher International Michael Fox International Karner & Co Appelboom The details within this brochure are for guidance only and do not form any part of any contract.