Self-Regulation Programme of Department of Environment (DOE) Techniques and skills for a highly effective certified environmental professional or competent person Best practices and technologies on reducing and recycling industrial scheduled waste, air emission and effluent Networking opportunities with industry leaders, invited guests and participants FMM Advocates Transparency, Integrity and No Corruption
FMM INDUSTRIAL WASTE MANAGEMENT CONFERENCE 2018 Skills and Technologies for Effective Waste Reduction May 15, 2018 (Tuesday) Royale Chulan Damansara Hotel, Petaling Jaya PROGRAMME * 8:00 am Registration of participants Company Exhibition Visits / Networking Breakfast 8:50 am Welcome Remarks YBhg Dato Mizanur Rahman Ghani Chairman of FMM Environmental Management Committee Regulatory Updates and Skills Requirements 9:00 am Guided Self-Regulation Programme with Environmental Mainstreaming Tools Tuan Haji Ruslan Bin Mohamad Director, Enforcement Division Department of Environment (DOE), Ministry of Natural Resources and Environment, Malaysia 9:50 am Techniques and Skills for a Highly Effective Certified Environmental Professional / Competent Person En Ahmad Saifful bin Salihin Principal Assistant Director Environment Institute of Malaysia (EiMAS), Department of Environment 10:25 am Question & Answer Session YBhg Dato Mizanur Rahman Ghani Chairman of FMM Environmental Management Committee Tuan Haji Ruslan Bin Mohamad, Director, Enforcement Division, Department of Environment (DOE), Ministry of Natural Resources and Environment, Malaysia En Ahmad Saifful bin Salihin, Principal Assistant Director, Environment Institute of Malaysia (EiMAS), Department of Environment 10:45 am Networking Coffee Break / Company Exhibition Visits FMM Industrial Waste Management Conference 2018 Page 2 of 5
Scheduled Waste and Waste Recovery 11:00 am Guidelines on Storage of Hazardous Chemicals En Mohd Norhisyam bin Omar Head of Convention and Chemical Control Section Chemical Management Division Department of Occupational Safety and Health, Ministry of Human Resources, Malaysia 11:35 am Hazardous and Non-Hazardous E-Waste Recycling and Management Dr Ir Joseph Heng Managing Director Victory Recovery Resources Sdn Bhd 12:10 pm Responsible Food Waste Management Ms Mae Ooi Sales Director Mentari Alam Eko (M) Sdn Bhd 12:45 pm Question & Answer Session Ir AK Woo Chairman of FMM CSR & Crisis Relief Committee En Mohd Norhisyam bin Omar, Head of Convention and Chemical Control Section, Chemical Management DivisionChemical Management Division, Department of Occupational Safety and Health, Ministry of Human Resources, Malaysia Dr Ir Joseph Heng, Managing Director, Victory Recovery Resources Sdn Bhd Ms Mae Ooi, Sales Director, Mentari Alam Eko (M) Sdn Bhd 1:10 pm Networking Lunch / Company Exhibition Visits Air Emission 2:15 pm Industrial Dust - Control Methods and Equipment Mr Andrew Leong Sales Director Master Jaya Engineering Sdn Bhd 2:50 pm Emerging Technologies to Capture Dust, Volatile Organic Compounds and Gas Mr Eric Tan Teck Fei APC Division Manager (Asia) American Air Filter Manufacturing Sdn Bhd 3:25 pm Networking Coffee Break / Company Exhibition Visits FMM Industrial Waste Management Conference 2018 Page 3 of 5
Industrial Effluent 3:40 pm How Primary Separation Affects Downstream Treatment for Industrial Wastewater Mr Ngeow Wan Sin Technical Manager Industrial Water Engineers (M) Sdn Bhd 4:15 pm Enhancing Efficacy of Industrial Effluent Treatment System (IETS) with Forward Osmosis (FO) Mr Regin S. Andersen Technical Manager (Darco) Darco Water Systems Sdn Bhd Mr Mark Edward Perry Vice-President of Business Development and Sales (Aquaporin) Darco Water Systems Sdn Bhd 4:50 pm Question & Answer Session Ir AK Woo Chairman of FMM CSR & Crisis Relief Committee Mr Andrew Leong, Sales Director, Master Jaya Engineering Sdn Bhd Mr Eric Tan Teck Fei, APC Division Manager (Asia), American Air Filter Manufacturing Sdn Bhd Mr Ngeow Wan Sin, Technical Manager, Industrial Water Engineers (M) Sdn Bhd Mr Regin S. Andersen, Technical Manager (Darco), Darco Water Systems Sdn Bhd Mr Mark Edward Perry, Vice-President of Business Development and Sales (Aquaporin), Darco Water Systems Sdn Bhd 5:15 pm Conference Concludes * Invited speakers and tentative presentation topics. The organiser reserves the right to alter the content and timing of the programme in the best interest of the Conference. FMM Industrial Waste Management Conference 2018 Page 4 of 5
FMM INDUSTRIAL WASTE MANAGEMENT CONFERENCE 2018 Skills and Technologies for Effective Waste Reduction May 15, 2018 (Tuesday) 8:00 am 5:15 pm Royale Chulan Damansara Hotel, Petaling Jaya WHO SHOULD ATTEND CEOs / MDs / GMs Environmental / Factory / Plant / Production Managers and Executives Engineers and Consultants PARTICIPATION FEES Early Bird Rate * (Figures in RM) Fee per pax GST Total per pax FMM member 650 39 689 Non-member 800 48 848 * Applicable for registrations received until April 30, 2018. * 10% group discount is not applicable until April 30, 2018. Normal Rate ** (Figures in RM) Fee per pax GST Total per pax FMM member 800 48 848 Non-member 950 57 1,007 **Applicable for registrations received from May 1, 2018 onwards. **10% group discount for 3 persons & more from the same company. Member s rate applies for Malaysian government officials. All fees are inclusive of course materials, lunch and refreshments. Conference materials are available for sale at half price of full registration fee after May 15, 2018. VENUE & ACCOMMODATION Royale Chulan Damansara Hotel 2, Jalan PJU 7/3, Mutiara Damansara, 47810 Petaling Jaya, Selangor Tel: 03-7959 9000 Fax: 03-7959 9111 Email: resvn@rcdsara.com.my Website: www.royalechulandamansara.com.my ENQUIRIES & REGISTRATION Contact: Ms. Ida Tan / Ms. Kwai Kaun Tel: 03-6286 7200 Fax: 03-6274 1266 / 7288 E-mail: ida@fmm.org.my / kwai_kaun@fmm.org.my FMM GST Registration No.: 001714290688 PAYMENT Registration form must be returned to FMM by May 8, 2018. All confirmed participants must pay the full fee before the event, otherwise registration will be cancelled. Walk-in participants with payment will be admitted on space availability basis. Payment methods Payee name: Federation of Malaysian Manufacturers 1) Cheque or bank draft crossed Account Payee Only. 2) Bank transfer. To email or fax bank-in slip to FMM to issue receipt (ida@fmm.org.my / fax: 03-6274 1266). Bank name: Malayan Banking Bhd Account no: 5-14208-33076-8 SWIFT Code: MBBEMYKL Please write the invoice number or the event name on the reverse side of the cheque or on the bank transfer slip. REFUND OF FEES Cancellation must be in writing to FMM. All registrations carry a 50% cancellation liability immediately after a completed registration form has been received by FMM. REPLACEMENT / CANCELLATION / NO-SHOW Replacement at no additional cost. FMM reserves the right to cancel or reschedule the programme. All efforts will be taken to inform participants of any changes. If FMM decides to cancel or postpone the conference, FMM will not be responsible for covering airfare, hotel or other travel costs incurred by participants. Participants who do not turn up at the event are liable for the full fee. CLOSING DATE FOR REGISTRATION: May 8, 2018 4 CPD hours ~ approved by EiMAS of DOE HRDF SBL Scheme claimable Early bird rate until April 30, 2018 Please register the following participant(s): [Attach a separate list if space is insufficient. Please tick ( ) appropriate box.] 1) Name: Designation: 2) Name: Designation: 3) Name: Designation: Payment: Full payment of RM will be made by May 8, 2018 via: Cheque/bank draft Bank transfer Submitted by: [Complete this section in capital letters. For non-gst registrant, please state NA in the boxes for GST number.] Name: Designation: Company: FMM Membership No: Address: Email: Tel: Fax: GST number: