Revision.0 www.grindex.com Parts List 805.8 Master
Table of Contents Table of Contents Introduction... Specially approved products... Product Description...3 Products included... 3 The data plate...3 Exploded Views...4 805.8...4 Spare Parts... 5 805.8...5 805.8 Master Parts List
Introduction Introduction Purpose of this manual The purpose of this manual is to provide necessary information on spare parts and accessories order. Disclaimer Always use genuine Grindex parts. The use of other spare parts or accessories can invalidate any claims for warranty or compensation. Grindex does not take any responsibility for damages that are caused by the use of non-original parts. For more information, contact your local sales and service representative. Data for ordering spare parts The following information is needed for spare part orders: Serial number of the product Part number Quantity of bulk material, see in tables Specially approved products Qualification of personnel Only Grindex or Grindex-authorized service personnel may undertake repair work on Ex-approved products. Dimensional accuracy inspection Spare parts marked with (Ex) after the part number are subject to dimensional accuracy inspection. 805.8 Master Parts List
Product Description Product Description Products included The data plate Introduction The data plate Pump model Standard EX MSHA Drainage Sludge Master 805.8 X X The data plate is a metal label located on the main body of the pump. The data plate lists key product specifications. 9 7 8 6 5 4 3 0 9 8 3 4 5 6 7 WS00008C. Pump type number. Frequency 3. Phases, type of current 4. Rated shaft power 5. Thermal class 6. Locked rotor code-letter 7. Country of origin 8. Maximum power consumption 9. Product weight 0. Maximum submersion depth. Degree of protection. Maximum capacity 3. Rated current 4. Direction of the start reaction 5. Direction of the impeller rotation 6. Maximum head 7. Serial number 8. Rated voltage 9. Pump model Product approvals for hazardous locations 805.8 Master Parts List 3
Exploded Views Exploded Views 805.8 43 4 40 44 4 3 5 7 9 30 35 37 38 34 0 33 3 4 3 5 8 84 70 80 05 77 9 93 50 5 5 04 07 06 47 03 8 6 7 79 89 73 4 6 39 35 75 37 83 3 9 4 7 74 64 90 94 85 86 87 78 39 7 6 35 37 38 6 65 5 4 64 0 38 7 46 6 55 56 BASIC REPAIR KIT 4 6 67 60 68 5 6 7 60 4 900 O-RING KIT 47 6 33 33 9 8 3 3 36 36 43 43 34 34 30 30 40 40 3 800 PLUG CONTACT 8 9 54 PHASE SHIFTER 4 4 3 3 0 55 53 44 44 5 H N SH 048B_expl_view_805_8 805.8 Master Parts List
Spare Parts 805.8 40 076 Hexagon flange screw M0X45-A-70 40 076 Hexagon flange screw M0X45-A-70 3 40 80 Retaining ring SGA 30 4 40 487 O-ring 9.X3 FPM 3 6 30 943 O-ring 39.3X5.7 NBR 7 3 4 O-ring 9.3X5.7 NBR 8 40 078 O-ring 56X3 NBR 9 40 0 O-ring 75X3 NBR 0 40 03 O-ring 5.5X3.0 FPM 40 00 Ball bearing 30X7X30. MM 50 87 04 Ball bearing 0X5X5 MM 3 40 053 Oil ISO VG 3 4 50 898 00 Marking tape 5 33 063 Inspection screw 3 6 5 06 00 Bearing holder 7 5 034 0 Shaft unit 8 50 863 00 Cooling jacket 9 5 060 00 Seal ring 0 5 755 5 Mechanical seal 5 757 00 Stator housing 5 049 03 Adapter 6 50 36 00 Instruction label 30 40 004 Hexagon head screw M0X30-A-70 3 40 075 Hexagon head screw MX0-A-7O 3 40 403 Hexagon head screw MX80-A-70 3 40 0 Hexagon nut M-A4-70 4 33 3 74 Plain washer -A-70 4 34 50 0 6 Plain washer 0-A4-70HV 4 35 40 55 O-ring 6X3.0 FPM 36 40 087 O-ring 74.3X5.7 NBR N 8 4 3 4 4 4 805.8 Master Parts List 5
36 40 090 O-ring 99.3X5.7 NBR SH H 37 40 895 O-ring 30.0X4.0 FPM 38 50 00 04 Hex.socket hd screw M6X0-A4-70 39 40 07 Pressure equalizer L=650 MM 40 5 045 00 Damper complete 4 4 5 05 00 Seal housing cov.coa N 4 5 050 00 Seal housing cov.coa H 4 5 37 00 Seal housing cov.coa SH 4 5 0 00 Diffuser coat. NBR N 4 5 0 0 Diffuser coat. PU N 4 5 0 00 Diffuser coat. NBR H 4 5 0 0 Diffuser coat. PU H 4 5 35 00 Diffuser coat. NBR SH 4 5 35 0 Diffuser coat. PU SH 43 5 053 00 Suction cover N 43 5 05 00 Suction cover H Material suction cover: Hard iron 43 5 389 0 Suction cover H Material suction cover: Stainless steel 43 5 33 00 Suction cover SH Material suction cover: Hard iron 44 5 054 00 Strainer 46 5 34 00 Diffuser coat. 47 5 36 00 Diffuser coat. NBR SH 47 5 36 0 Diffuser coat. PU SH 5 40 886 O-ring 35X4 NBR 55 5 008 08 Stator 8-5-b 6-leads 3-phase 60 Hz - poles 00V-08V D 55 5 008 0 Stator 8-5-b 6-leads 3-phase 50 Hz - poles 0V-40V D 55 5 008 06 Stator 8-5-b 6-leads 3-phase 60 Hz - poles 0V-40V D 55 5 008 04 Stator 8-5-b 9-leads 3-phase 60 Hz - poles 0V-40V Y// 9-leads 3-phase 60 Hz - poles 440V-480V YSER 8 4 6 805.8 Master Parts List
55 5 008 Stator 8-5-b -leads 3-phase 60 Hz - poles 0V-30V D// -leads 3-phase 60 Hz - poles 440V-460V DSER -leads 3-phase 60 Hz - poles 380V-400V Y// 55 5 008 6 Stator 8-5-b 6-leads 3-phase 50 Hz - poles 380V-400V D 6-leads 3-phase 60 Hz - poles 440V-480V D 6-leads 3-phase 50 Hz - poles 660V-690V Y 55 5 008 4 Stator 8-5-b 3-leads 3-phase 60 Hz - poles 460V-480V Y 55 5 008 0 Stator 8-5-b 6-leads 3-phase 60 Hz - poles 380V-400V D 55 5 008 0 Stator 8-5-b 6-leads 3-phase 50 Hz - poles 45V-440V D 55 5 008 03 Stator 8-5-b 6-leads 3-phase 50 Hz - poles 500V D 6-leads 3-phase 60 Hz - poles 575V-600V D 55 5 008 5 Stator 8-5-b 3-leads 3-phase 60 Hz - poles 575V-600V Y 55 5 008 05 Stator 8-5-b 6-leads 3-phase 50 Hz - poles 55V-550V D 6-leads 3-phase 50 Hz - poles 000V Y 56 40 034 Closed-end splice 3-6(AWG -0) L=8 56 40 034 Closed-end splice 3-6(AWG -0) L=8 9-leads 3-phase 60 Hz - poles 0V-40V Y// 9-leads 3-phase 60 Hz - poles 440V-480V YSER -leads 3-phase 60 Hz - poles 440V-460V DSER -leads 3-phase 60 Hz - poles 380V-400V Y// 9-leads 3-phase 60 Hz - poles 0V-40V Y// 9-leads 3-phase 60 Hz - poles 440V-480V YSER -leads 3-phase 60 Hz - poles 440V-460V DSER -leads 3-phase 60 Hz - poles 380V-400V Y// 8 805.8 Master Parts List 7
56 40 034 Closed-end splice 3-6(AWG -0) L=8 60 40 070 Hexagon head screw M0X70-A-70 60 40 475 Hexagon head screw M0X40-A-70 9-leads 3-phase 60 Hz - poles 0V-40V Y// 9-leads 3-phase 60 Hz - poles 440V-480V YSER -leads 3-phase 60 Hz - poles 440V-460V DSER -leads 3-phase 60 Hz - poles 380V-400V Y// N H SH 6 50 0 6 Plain washer 0-A4-70HV 6 5 07 50 Impeller N 50Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 6 5 07 5 Impeller N 60Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 6 5 06 50 Impeller H 50Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 6 5 06 54 Impeller H 60Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 6 5 385 0 Impeller H 50Hz 3-phase Maximum temperature 40 DC Material Stainless steel, castings 6 5 385 03 Impeller H 60Hz 3-phase Maximum temperature 40 DC Material Stainless steel, castings 6 - Impeller 6 5 38 00 Impeller SH 50Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 6 5 38 0 Impeller SH 60Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 64 5 756 00 Sleeve unit 65 33 064 O-ring 9.X3 NBR 67 5 756 00 Sleeve unit 68 5 37 00 Impeller SH 50Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 68 5 37 0 Impeller SH 60Hz 3-phase Maximum temperature 40 DC Material Hard-Iron TM 70 40 7 Stud MX35-A-70 4 8 3 8 805.8 Master Parts List
7 50 0 33 Hex.socket hd screw M8X0-A4-80 7 50 0 7 Hex.socket hd screw M0X5-A4-70 73 40 887 Hexagon flange screw MX45-A-70 74 40 049 Hex.socket hd screw M8X6-A-70 75 40 000 Drive screw 4X5-A/A4 4 77 3 34 O-ring 89.3X5.7 NBR 78 40 63 O-ring 78X4 NBR 79 50 00 04 Hex.socket hd screw M6X0-A4-70 80 40 3 Insulating hose D=6 MM 80 40 056 Insulating hose D=4 MM 8 5 800 00 Sticker 83 50 888 00 Plate-blank 84 50 86 00 Cover 84 50 86 0 Cover Float switch 85 50 869 00 Air release valve 86 5 060 00 Seal ring 87 50 857 00 Handle 88 50 99 00 Sticker CUT HAZARD 89 50 993 38 Contactor unit Contactor unit 50Hz 3- phase 0V - 40V Not CSA approved Overload Contactor unit 50Hz 0V - 40V Float switch Not CSA approved 89, 50 995 00 Holder 89,4 5 5 07 Motor protector SMART 89,5 40 85 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,7 5 076 00 Cable set 89,5 40 8 Overload relay 8 4 8 6 805.8 Master Parts List 9
89 50 993 40 Contactor unit Contactor unit 50Hz 3- phase 380V - 400V Not CSA approved Overload Contactor unit 50Hz 3- phase 45V - 440V Not CSA approved Overload Contactor unit 50Hz 380V - 400V Float switch Not CSA approved 89, 50 995 00 Holder 89,4 5 5 05 Motor protector SMART 89,5 40 84 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,5 40 89 Overload relay 89,8 5 076 00 Cable set 89 50 993 9 Contactor unit Contactor unit 50Hz 3- phase 500V - 500V Not CSA approved Overload 89, 50 995 00 Holder 89,4 5 5 05 Motor protector SMART 89,5 40 84 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,5 40 88 Overload relay 89,8 5 076 00 Cable set 89 50 993 54 Contactor unit Contactor unit 50Hz 3- phase 55V - 550V Not CSA approved Overload 89, 50 995 00 Holder 89,4 5 5 05 Motor protector SMART 8 0 805.8 Master Parts List
89,5 40 893 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,5 40 894 Overload relay 89,8 5 076 00 Cable set 89 50 993 4 Contactor unit Contactor unit 60Hz 00V - 08V Float switch CSA approved Contactor unit 60Hz 3- phase 00V - 08V CSA approved Overload Contactor unit 60Hz 0V - 40V Float switch CSA approved Contactor unit 60Hz 3- phase 0V - 40V CSA approved Overload 89, 50 995 00 Holder 89,4 5 5 08 Motor protector SMART 89,5 40 85 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,5 40 83 Overload relay 89,8 5 076 00 Cable set 89 50 993 34 Contactor unit Contactor unit 60Hz 3- phase 380V - 400V CSA approved Overload Contactor unit 60Hz 3- phase 380V - 400V Not CSA approved Overload Contactor unit 60Hz 3- phase 380V - 400V Float switch Not CSA approved 8 805.8 Master Parts List
89, 50 995 00 Holder 89,4 5 5 06 Motor protector SMART 89,5 40 84 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,5 40 80 Overload relay 89,8 5 076 00 Cable set 89 50 993 45 Contactor unit Contactor unit 60Hz 3- phase 440V - 480V CSA approved Overload 89, 50 995 00 Holder 89,4 5 5 06 Motor protector SMART 89,5 40 84 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,7 5 076 00 Cable set 89,5 40 89 Overload relay 89 50 993 36 Contactor unit Contactor unit 60Hz 3- phase 575V - 600V CSA approved Overload 89, 50 995 00 Holder 89,4 5 5 06 Motor protector SMART 89,5 40 893 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89,5 40 894 Overload relay 8 805.8 Master Parts List
89,8 5 076 00 Cable set 89 - Contactor unit 89, 50 995 00 Holder 89,4 5 5 05 Motor protector SMART 89,5 40 84 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 89,7 50 900 6 Single-core cable 89, 40 034 Closed-end splice 3-6(AWG -0) L=8 89,5 40 89 Overload relay 89,8 5 076 00 Cable set 89,9 5 779 00 Supervision relay 89,30 50 457 00 Cable tie 89 5 38 0 Softstarter COMPLETE UNIT Softstarter 50Hz 3-phase 400V - 400V Float switch Not CSA approved Overload Softstarter 50Hz 3-phase 400V - 400V Not CSA approved Overload 89 5 747 00 Contactor unit Contactor unit 50Hz 3- phase 380V - 400V Y/D Float switch Not CSA approved Overload Contactor unit 50Hz 3- phase 380V - 400V Y/D Not CSA approved Overload 89, 5 743 00 Holder 89,4 5 5 05 Motor protector SMART 89,5 40 907 Contactor 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 6 89,8 50 509 00 Cable set 89,5 40 945 Overload relay 89,8 5 744 00 Cable set 8 6 805.8 Master Parts List 3
89,9 40 898 Interlock unit 89,30 40 899 Holder 89,3 50 48 0 Time relay 89 5 747 0 Contactor unit Contactor unit 60Hz 3- phase 460V - 480V Y/D Not CSA approved Overload 89, 5 743 00 Holder 89,4 5 5 06 Motor protector SMART 89,5 40 908 Contactor 89,6 40 008 Hex.socket hd screw M4X6-A-70 89,7 40 0 Lock nut 89,8 40 008 Hex.socket hd screw M4X6-A-70 89,9 40 0 Lock nut 6 89,8 50 509 00 Cable set 89,5 40 945 Overload relay 89,8 5 744 00 Cable set 89,9 40 898 Interlock unit 89,30 40 899 Holder 89,3 50 48 0 Time relay 89 50 975 0 Con.term.board unit Terminal board 50Hz 3- phase 380V - 400V Y/D Not CSA approved Terminal board 60Hz 3- phase 440V - 480V Y/D Not CSA approved 90 5 67 0 Connection plate 9 50 86 00 Main cover 9 50 900 63 Single-core cable Contactor unit 9 50 900 69 Single-core cable Contactor unit 9 50 900 68 Single-core cable Softstarter 9 50 900 53 Single-core cable Softstarter 93 5 639 0 Cable set 94 5 64 00 Terminal plate unit 3-phase 94 5 758 00 El.lead through unit 3-phase 380V - 400V Y/D 3-phase 440V - 480V Y/D 3-phase 460V - 480V Y/D 00 5 748 00 Sticker SOFTSTARTER PH.SEQ. GUARD 03 05 839 Cable tie 98X.5 MM 8 6 4 805.8 Master Parts List
04 40 034 Closed-end splice 3-6(AWG -0) L=8 05 3 354 Insulating hose D=0 MM 06 40 87 Flat pin sleeve 07 50 040 05 Insulating sleeve 0.5-6 MM 40 077 Cable clamp STAINLESS STEEL, CR 5 76 06 Level regulator unit EU Contactor unit 50Hz 0V - 40V Float switch Not CSA approved Contactor unit 50Hz 45V - 440V Float switch with isolated input Not CSA approved Contactor unit 50Hz 500V Float switch with isolated input Not CSA approved Contactor unit 50Hz 3- phase 55V - 550V Float switch with isolated input Not CSA approved Overload, 40 87 Flat pin sleeve,3 50 040 05 Insulating sleeve 0.5-6 MM,4 50 0 End sleeve.5 MM; L=7 MM,6 40 873 Cable lug UL/CSA 0.5-.65 MM,7 40 034 Closed-end splice 3-6(AWG -0) L=8,8 40 774 Level switch,9 40 370 Plain washer,0 5 78 00 Bending protection, 40 367 Gland screw 8 805.8 Master Parts List 5
5 76 08 Level regulator unit EU Softstarter 50Hz 3-phase 400V - 400V Float switch Not CSA approved Overload Contactor unit 50Hz 380V - 400V Float switch Not CSA approved Contactor unit 50Hz 3- phase 380V - 400V Y/D Float switch Not CSA approved Overload Contactor unit 60Hz 3- phase 380V - 400V Float switch Not CSA approved, 40 87 Flat pin sleeve, 50 040 05 Insulating sleeve 0.5-6 MM,3 50 0 End sleeve.5 MM; L=7 MM,5 40 873 Cable lug UL/CSA 0.5-.65 MM,6 40 034 Closed-end splice 3-6(AWG -0) L=8,7 40 370 Plain washer,8 50 76 00 Level switch,9 5 78 00 Bending protection,0 40 367 Gland screw 5 76 07 Level regulator unit US/CDN Contactor unit 60Hz 00V - 08V Float switch CSA approved Contactor unit 60Hz 575V Float switch with isolated input CSA approved Contactor unit 60Hz 0V - 40V Float switch CSA approved Contactor unit 60Hz 440V - 480V Float switch with isolated input CSA approved Contactor unit 60Hz 380V - 400V Float switch with isolated input CSA approved, 40 87 Flat pin sleeve,3 50 040 05 Insulating sleeve 0.5-6 MM,4 50 0 End sleeve.5 MM; L=7 MM 8 6 805.8 Master Parts List
,6 40 873 Cable lug UL/CSA 0.5-.65 MM,7 40 034 Closed-end splice 3-6(AWG -0) L=8,9 40 868 Level switch,0 40 370 Plain washer, 5 78 00 Bending protection, 40 367 Gland screw,3 50 89 4 Connection plate 3 5 749 00 Bracket 3 5 735 0 Sticker 3 5 735 00 Sticker 4 40 00 Hex.socket hd screw M8X-A-70 4 5 735 0 Sticker 5 50 0 37 Hexagon nut M8-A4-70 6 40 87 Flat pin sleeve 7 50 040 05 Insulating sleeve 0.5-6 MM 8 50 086 00 Faston connector 0 40 97 Hexagon head screw MX35-A-70 3 334 Plain washer (30)-3 MM Power cable x SUBCAB 4G4 6-7mm Max 750V Screened 6x,5+x,5 8,0-9,90mm Max 000V SUBCAB 4G6 8-9mm Max 750V SUBCAB AWG/4 7-8mm Max 600V Screened 3x,5 3,50-4,90mm Max 000V SUBCAB S3x,5+3x,5/3+S(4x0,5) 8-0mm Max 000V SUBCAB 4G,5+x,5 7-8mm Max 750V SUBCAB 0AWG/4 8-9,70mm Max 600V SUBCAB 4G,5,50-3,50mm Max 750V 8 4 805.8 Master Parts List 7
3 336 Plain washer (3)-34 MM SUBCAB 8AWG/3---GC 7,0-9,0mm Max 600V SUBCAB 4G4+x,5 0 - mm Max 750V SUBCAB 6AWG/3---GC 30-3mm Max 600V SUBCAB 7G,5+x,5 0 - mm Max 750V SUBCAB 4G0+S(x0,5) 4-6mm Max 000V SUBCAB AWG/7 0 - mm Max 600V SUBCAB 8AWG/4 4-6mm Max 600V SUBCAB 0AWG/3---GC 0,30 -,30mm Max 600V SUBCAB 4G6+x,5 4-6mm Max 750V 3 3 Plain washer (33)-35 MM SUBCAB 4AWG/3---GC 3,80-34,80mm L= 6m Max 600V 40 086 O-ring 49.5X3 NBR 3 50 00 04 Hex.socket hd screw M6X0-A4-70 3 50 00 04 Hex.socket hd screw M6X0-A4-70 4 40 53 Seal sleeve ()-4 MM Screened 3x,5 3,50-4,90mm Max 000V SUBCAB 4G,5,50-3,50mm Max 750V 4 40 3 Seal sleeve (7)-0 MM Screened 6x,5+x,5 8,0-9,90mm Max 000V SUBCAB 4G6 8-9mm Max 750V SUBCAB AWG/4 7-8mm Max 600V SUBCAB S3x,5+3x,5/3+S(4x0,5) 8-0mm Max 000V SUBCAB 4G,5+x,5 7-8mm Max 750V SUBCAB 0AWG/4 8-9,70mm Max 600V 8 4 4 4 8 805.8 Master Parts List
4 40 4 Seal sleeve (0)-3 MM SUBCAB 4G4+x,5 0 - mm Max 750V SUBCAB 7G,5+x,5 0 - mm Max 750V SUBCAB AWG/7 0 - mm Max 600V SUBCAB 0AWG/3---GC 0,30 -,30mm Max 600V 4 40 Seal sleeve (4)-7 MM SUBCAB 4G4 6-7mm Max 750V 4 40 5 Seal sleeve (3)-6 MM SUBCAB 4G0+S(x0,5) 4-6mm Max 000V SUBCAB 8AWG/4 4-6mm Max 600V SUBCAB 4G6+x,5 4-6mm Max 750V 4 40 6 Seal sleeve (6)-9 MM SUBCAB 8AWG/3---GC 7,0-9,0mm Max 600V 4 40 7 Seal sleeve (9)-3 MM SUBCAB 6AWG/3---GC 30-3mm Max 600V 4 40 8 Seal sleeve (3)-35 MM SUBCAB 4AWG/3---GC 3,80-34,80mm Max 600V 5 3 039 Motor cable subcab SUBCAB 4G,5,50-3,50mm L= 0m Max 750V 5 50 777 00 Motor cable subcab SUBCAB 4G,5+x,5 7-8mm L= 0m Max 750V 5 40 063 Motor cable subcab SUBCAB 7G,5+x,5 0 - mm L= 0m Max 750V 5 33 39 Motor cable subcab SUBCAB 4G4 6-7mm L= 0m Max 750V 5 40 9 Motor cable subcab SUBCAB 4G4+x,5 0 - mm L= 0m Max 750V 5 3 08 Motor cable subcab SUBCAB 4G6 8-9mm L= 0m Max 750V 5 40 6 Motor cable subcab SUBCAB 4G6+x,5 4-6mm L= 0m Max 750V 5 40 85 Motor cable subcab SUBCAB 4G0+S(x0,5) 4-6mm L= 0m Max 000V 5 40 067 Motor cable subcab SUBCAB AWG/4 7-8mm L= 6m Max 600V 5 40 068 Motor cable subcab SUBCAB AWG/7 0 - mm L= 6m Max 600V 8 805.8 Master Parts List 9
5 40 3 Motor cable subcab SUBCAB 0AWG/4 8-9,70mm L= 6m Max 600V 5 40 069 Motor cable SUBCAB 0AWG/3---GC 0,30 -,30mm L= 6m Max 600V 5 40 33 Motor cable subcab SUBCAB 8AWG/4 4-6mm L= 6m Max 600V 5 40 34 Motor cable SUBCAB 8AWG/3---GC 7,0-9,0mm L= 6m Max 600V 5 40 35 Motor cable SUBCAB 6AWG/3---GC 30-3mm L= 6m Max 600V 5 40 36 Motor cable SUBCAB 4AWG/3---GC 3,80-34,80mm L= 6m Max 600V 5 40 059 Motor cable Screened 3x,5 3,50-4,90mm L= 0m Max 000V 5 40 060 Motor cable Screened 6x,5+x,5 8,0-9,90mm L= 0m Max 000V 5 40 860 Motor cable subcab SUBCAB S3x,5+3x,5/3+S(4x0,5) 8-0mm L= 0m Max 000V 6 5 05 0 Sleeve 7 50 90 00 Earthing plate 7 50 90 00 Earthing plate 8 5 033 04 Entrance flange 9 40 875 Cap 6X6 PVC SUBCAB 4G0+S(x0,5) 4-6mm Max 000V 9 40 874 Cap 5X0 MM PVC SUBCAB S3x,5+3x,5/3+S(4x0,5) 8-0mm Max 000V 30 40 878 Cap 4X45 MM PVC SUBCAB 4G0+S(x0,5) 4-6mm Max 000V 30 40 69 Cap 8X5 MM PVC SUBCAB S3x,5+3x,5/3+S(4x0,5) 8-0mm Max 000V 3 50 00 End sleeve 0.75 MM; L=6 MM 3 40 88 Closed-end splice 0.33-0.8(AWG -8) L=8 33 40 873 Cable lug UL/CSA 0.5-.65 MM 8 0 805.8 Master Parts List
34 40 97 Shrink hose ID= MM 35 40 98 Shrink hose ID=3. MM 37 40 034 Closed-end splice 3-6(AWG -0) L=8 38 40 054 Shrink hose ID=6.4 MM 39 40 994 Shrink hose 40 40 0 Hexagon nut M-A4-70 4 4 3 74 Plain washer -A-70 4 4 3 74 Plain washer -A-70 43 50 897 00 U-ring 44 50 944 00 Discharge connection DN 75 Hose 3'' aluminium 44 50 944 0 Discharge connection DN 75 Thread : ISO G3A Outer aluminium DN 75 Thread : ISO G3A Outer Quick coupling: Storz aluminium 44 50 944 03 Discharge connection DN 75 Thread : Victaulic groove Outer aluminium 44 50 944 0 Discharge connection DN 75 Thread : NPT 3-8 Outer aluminium 44 50 99 00 Discharge connection DN 00 Hose 4'' aluminium 44 50 99 0 Discharge connection DN 00 Thread : ISO G4A Outer Quick coupling: Storz diam=5 mm aluminium DN 00 Thread : ISO G4A Outer Quick coupling: Storz aluminium DN 00 Thread : ISO G4A Outer aluminium 44 50 99 03 Discharge connection DN 00 Thread : Victaulic groove Outer aluminium 44 50 99 0 Discharge connection DN 00 Thread : NPT 4-8 Outer aluminium 44 5 038 05 Discharge connection DN 50 Hose 6'' aluminium 44 5 038 06 Discharge connection DN 50 Thread : ISO G6A Outer aluminium DN 50 Thread : ISO G6A Outer Quick coupling: Storz aluminium 44 5 038 09 Discharge connection DN 50 Thread : Victaulic groove Outer aluminium 44 5 038 08 Discharge connection DN 50 Thread : NPT 6-8 Outer aluminium 46 40 08 Coupling part Discharge Connection DN 75 Thread : ISO G3A Outer Quick coupling: Storz aluminium 8 805.8 Master Parts List
46 40 030 Coupling part Discharge Connection DN 00 Thread : ISO G4A Outer Quick coupling: Storz aluminium 46 40 09 Coupling part Discharge Connection DN 00 Thread : ISO G4A Outer Quick coupling: Storz diam=5 mm aluminium 46 40 099 Coupling part Discharge Connection DN 50 Thread : ISO G6A Outer Quick coupling: Storz aluminium 47 40 87 Flat pin sleeve 50 50 086 00 Faston connector 5 40 87 Flat pin sleeve 5 50 040 05 Insulating sleeve 0.5-6 MM 53 33 39 Motor cable subcab Starter (Phase shifter) 3- phase 50/60 Hz 0V - 575V Current range: 0 - A Plug combined with short cable: SUBCAB 4G4 Starter (Phase shifter) 3- phase 50 Hz 380V - 45V Current range: 0 - A Plug combined with short cable: SUBCAB 4G4 Supply connection: CEE 5-PLUG 3A 53 40 067 Motor cable subcab Starter (Phase shifter) 3- phase 50/60 Hz 0V - 575V Current range: 0 - A Plug combined with short cable: SUBCAB AWG/4 53 3 08 Motor cable subcab Starter (Phase shifter) 3- phase 50/60 Hz 0V - 575V Current range: 0-48A Plug combined with short cable: SUBCAB 4G6 53 40 33 Motor cable subcab Starter (Phase shifter) 3- phase 50/60 Hz 0V - 575V Current range: 0-48A Plug combined with short cable: SUBCAB 8AWG/4 8 805.8 Master Parts List
54 50 00 0 Plug contact 3-phase 50 Hz 380V - 45V Current range: 0-3A Plug combined with short cable: No cable Supply connection: CEE 5-PLUG 3A Starter (Phase shifter) 3- phase 50 Hz 380V - 45V Current range: 0 - A Plug combined with short cable: SUBCAB 4G4 Supply connection: CEE 5-PLUG 3A 54 40 685 Plug contact 3-phase 50 Hz 380V - 45V Current range: 0-3A Plug combined with short cable: No cable Supply connection: CEE 4-PLUG 3A 55 50 0 0 Phase shifter Current range: 0 - A 55 50 0 0 Phase shifter Current range: 0-48A 800 5 775 00 O-ring kit NBR 80 5 080 00 Zinc anode kit 900 5 778 00 Basic repair kit NBR PLUGIN 5MM RSIC/ RSIC;WCCR/A03 900, 40 00 Ball bearing 30X7X30. MM 900, 50 87 04 Ball bearing 0X5X5 MM 900,3 40 07 Pressure equalizer L=650 MM 900,4 5 755 5 Mechanical seal 900,5 5 775 00 O-ring kit 900,6 5 89 00 Sticker 8 805.8 Master Parts List 3
www.grindex.com Grindex Gesällvägen 33 74 07 Sundbyberg Sweden Tel: +46-8-606 66 00 Fax: +46-8-745 53 8 www.grindex.com Visit our Web site for the latest version of this document and more information The original instruction is in English. All non-english instructions are translations of the original instruction. 0 Grindex 883795_.0_en-US_05-06_GPL.805.8