Client Project name Order# Type Qty FEATURES AND BENEFITS Physical Housing material: aluminum housing Reflector material: metallized polycarbonate Trim finish: white, black, satin or TRL trimless version Damp location rating (interior applications only) Option: WET (IP54 rating suitable for wet locations, under covered ceiling) Performance Nominal lumen outputs: 700, 1000, 1300 and 2000 lumens Optics: 40 or 60 CRI values: 80+, 95+, Radiant 80+ or Radiant 95+ Lumen maintenance: L70 @ 90,000 hrs [25 C] Operating temperatures: -20 C to 40 C (-4F to 104F) Electrical Input voltage:120 or 277V, consult factory for 347V Control options: non-dimming, 0-10 volt dimming, DALI dimming, Lumentalk dimming or Lutron EcoSystem Enabled dimming Performance summary Based on Medium (40 ), 4000K, CRI 80+ insulated ceiling non-insulated ceiling Nominal output [lm] Delivered output [lm] [W] Efficacy [lm/w] ** [W] Efficacy [lm/w] 700* 711 7 101 9 79 1000 1016 10 101 12 84 2000lm CR80/RCR80 1300 2000 1320 2031 14 94 16 82 25 81 700/1000/1300lm *Photometric performance is measured in compliance with IESNA LM-79-08. **Add 3 watts per fixture when specifying Lumentalk. 4 15 " 16 [126mm] 6 15 [176mm] SIDE VIEW 2 5 8 " [67mm] Medium (40 ) Wide (60 ) 4 1 4 " [108mm] BOTTOM VIEW Cutout: Ø 3 3/4" [95mm] Maximum ceiling thickness: 1" [25mm] 1/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
TRIMLESS VERSION - ROUND SHAPE 700/1000/1300lm 4 3 " 4 [121mm] SIDE VIEW 2 11 [69mm] 5 1 2 " [140mm] BOTTOM VIEW Cutout: Ø 4 1/2" [115mm] Maximum ceiling thickness: 1" [25mm] TRIMLESS VERSION - SQUARE SHAPE 700/1000/1300lm 4 13 [122mm] SIDE VIEW 2 11 [69mm] 5 1 2 " [140mm] BOTTOM VIEW Cutout: 4 7/16" x 4 7/16" [112mm x 112mm] Maximum ceiling thickness: 1" [25mm] 2/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
WET OPTION IP54 rating suitable for wet location. Suitable for covered ceiling-mounted recessed applications only. 2000lm CR80/RCR80 700/1000/1300lm 5" [127mm] 7" [177mm] SIDE VIEW 2 9 [65mm] 4 3 8 " [111mm] BOTTOM VIEW Cutout: Ø 3 3/4" [95mm] Maximum ceiling thickness: 1" [25mm] 3/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
PHOTOMETRIC INFORMATION Medium (40 ), all color temperatures Non-insulated ceiling installation types (RM and NC) 1,2 Nominal output [lm] [W] Delivered output [lm] Candlepower distribution Illuminance cone 700* CR80 9 CR95 11 711 1168 Center Beam Illuminance Beam Diameter Height 1000 12 15 1016 2337 73fc [781 lx] 5.8 [1.7m] 8 [2.5m] 1300 16 20 1320 3502 47fc [500 lx] 7.3 [2.2m] 10 [3m] 2000 25 2031 4671 32fc [347 lx] 8.7 [3.6m] 12 [4m] Wide (60 ), all color temperatures Non-insulated ceiling installation types (RM and NC) 1,2 Nominal output [lm] [W] Delivered output [lm] Candlepower distribution Illuminance cone 700* CR80 9 CR95 11 688 799 Center beam Illuminance Beam Diameter Height 1000 12 15 3 1602 50fc [535 lx] 9.2 [2.8m] 8 [2.5m] 1300 16 20 1278 2402 32fc [343 lx] 11.5 [3.5m] 10 [3m] 2000 25 1966 3203 22fc [238 lx] 13.9 [4.2m] 12 [4m] 1 Remove 2 watts per fi xture when specifying new construction insulated ceiling installation types (IC and CP). 2 Add 3 watts per fi xture when specifying Lumentalk. *Photometric performance is measured in compliance with IESNA LM-79-08. Delivered wattage and delivered output: +/- 10% tolerance. 4/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
PHOTOMETRIC INFORMATION - continued Color Rendering options comparison, 3000K Color sample Ra R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14 R15 CRI 80+ CRI 95+ 81 80 85 99 89 81 78 80 97 86 66 16 96 64 99 79 58 88 81 93 75 Radiant CRI 80+ 81 81 86 89 81 80 80 85 68 16 66 80 62 82 93 77 Radiant CRI 95+ 95 99 97 96 96 95 94 90 97 95 97 CONTROL OPTIONS Dimming down to 1% 0-10V dimming DA1-0-10V dimming, 1% linear DA2-0-10V dimming, 1% logarithmic Dimming down to 0.1% DALI dimming DALI1 - DALI dimming, 0.1% linear DALI2 - DALI dimming, 0.1% logarithmic Professional dimming down to 0.1% 0-10V dimming PDA1 - Professional 0-10V dimming, 0.1% linear PDA2 - Professional 0-10V dimming, 0.1% logarithmic Brightness % Linear Curve Voltage % Brightness % Logarithmic curve Voltage % Lumentalk dimming LT - Lumentalk dimming, 1% minimum dimming value Lutron EcoSystem Enabled dimming H-Series LED driver ES - Lutron EcoSystem Enabled dimming, 1% minimum dimming value 5/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
INSTALLATION TYPES Minimum Ceiling Height Requirements Remodel (RM) Up to 1000lm (CRI 80) On/Off = 6" Dimming = 8" 1300lm (CRI 80) 1000lm (CRI 95) On/Off = 6" Dimming = 8" 2000lm 3000lm 8" New Construction (NC) 6" 6" 8" Insulation Contact (IC/CP) 7" 9" NA 2 9 8 13 12" [224mm] 2 9 [305mm] [65mm] [65mm] Available knockout holes: 2x Ø7/8" [22mm] Internal wire gauge: 18 AWG TOP VIEW 7 " 1 13 [178mm] [47mm] Available knockout holes: 2x Ø7/8" [22mm] Internal wire gauge: 18 AWG 1 13 [47mm] TOP VIEW 10 3 [224mm] SIDE VIEW FRONT VIEW SIDE VIEW FRONT VIEW LASS-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-NO-RM Remodel non-insulated ceiling - on/off control LASS-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-DIMG-RM Remodel non-insulated ceiling - dimming 14 1 4 " [362mm] 25 1 2 " [650mm] Available knockout holes: 2x Ø1-1/8", 2x Ø7/8", 1x Ø5/8" Internal wire gauge: 18 AWG 14 1 4 " [362mm] 25 1 2 " [650mm] Available knockout holes: 2x Ø1-1/8", 2x Ø7/8", 1x Ø5/8" Internal wire gauge: 18 AWG 14 3 8 " [365mm] 4 5 [109mm] 14 3 8 " 4 5 [365mm] [109mm] TOP VIEW 4 5 [109mm] TOP VIEW 4 5 [109mm] 4 7 8 " [124mm] 9 3 8 " [239mm] 5" 6 1 2 " 4 7 8 " [124mm] 9 3 8 " [239mm] 5" 6 1 2 " [125mm] [162mm] [125mm] [162mm] FRONT VIEW FRONT VIEW LASS-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-NO-NC New construction non-insulated ceiling - on/off control LASS-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-DIMG-NC New construction non-insulated ceiling - dimming 6/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
INSTALLATION TYPES - continued 14 1 4 " [362mm] 25 1 2 " [650mm] Available knockout holes: 2x Ø1-1/8", 3x Ø7/8", 1x Ø5/8" Internal wire gauge: 18 AWG 14 3 [360mm] 14 1 4 " [362mm] 25 1 2 " [650mm] Available knockout holes: 2x Ø1-1/8", 3x Ø7/8", 1x Ø5/8" Internal wire gauge: 18 AWG 4 9 [116mm] 17 9 [447mm] 6 5 [160mm] 4 5 TOP VIEW 6 1 [154mm] TOP VIEW 9 3 8 " [239mm] [109mm] 12 15 [328mm] 6 13 [173mm] 5" 6 1 2 " [125mm] [162mm] 8 7 [215mm] 5" 6 1 2 " [125mm] [162mm] FRONT VIEW FRONT VIEW LASS-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-CONTROL-IC/CP* New construction insulated ceiling New construction insulated ceiling, Chicago plenum rated option, airtight Not available for TRL trimless version *Available for the following output and color rendering combinations: LASS-MTG-A-VOLTAGE-OUTPUT-COLOR RENDERING-CONTROL-IC/CP* New construction insulated ceiling New construction insulated ceiling, Chicago plenum rated option, airtight Not available for TRL trimless version *Available for the following output and color rendering combinations: Nominal output [lm] CR80 Color rendering CR95 RCR80 RCR95 Nominal output [lm] CR80 Color rendering CR95 RCR80 RCR95 L07 L10 L10 L13 7/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
WIRING DETAILS RM: remodel non-insulated ceiling No Control Conduit fitting Conduit Ground (green) Input Optional Output Output to luminaire Control (DA1, DA2, PDA1, PDA2, DALI1, DALI2) Conduit fitting Conduit Ground (green) Input Data Input from Control System Data - (gray) Data + (purple) Output to luminaire Control (Daisy Chain Layout) (DA1, DA2, PDA1, PDA2, DALI1, DALI2) Conduit Output to next luminaire Input Duplex connector Ground (green) Data Output to next luminaire Data Input from Control System Data - (gray) Data + (purple) Output to luminaire 8/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
WIRING DETAILS - continued RM: remodel non-insulated ceiling Lumentalk dimming available up to 1000 Lumens (CR80, RCR80, CR95 or RCR95), 1300 Lumens (CR80 or RCR80) Control (LT) Conduit fitting Conduit Ground (green) Input Output to luminaire Control (Daisy Chain Layout) (LT) Conduit fitting Conduit Ground (green) Input Output to next luminaire Output to luminaire 9/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
WIRING DETAILS - continued NC: new construction non-insulated ceiling No Control Input Optional Output Conduit Conduit fitting Ground (copper) Control (DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem )* Output to luminaire Ground (green) Ground (copper) Input Conduit Conduit fitting Data + (purple) Data Input from Control System Data - (gray) Control (Daisy Chain Layout) (DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem )* Output to next Input luminaire Output to luminaire Ground (green) Ground (copper) Conduit Duplex connector Data Output to next luminaire Data Input from Control System Data + (purple) Data - (gray) *Each Lutron EcoSystem enabled fixture has its own address; for each of the examples shown above, there is one EcoSystem address. Lutron EcoSystem Enabled dimming is not available for 700 Lumens (CR95 or RCR95). 10/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
WIRING DETAILS - continued IC/CP: new construction insulated ceiling Insulated ceiling up to 1000 Lumens (CR80, RCR80, CR95 or RCR95), 1300 Lumens (CR80 or RCR80) Not available for TRL trimless version No Control Input Optional Output Conduit Conduit fitting Ground (copper) Control (DA1, DA2, PDA1, PDA2, DALI1, DALI2) Input Data Input from Control System Conduit Conduit fitting Ground (copper) Data - (gray) Data + (purple) Control (Daisy Chain Layout) (DA1, DA2, PDA1, PDA2, DALI1, DALI2) Input Output to next luminaire Data Input from Control System Data Output to next luminaire Conduit Duplex connector (by others) Ground (copper) Data - (gray) Data + (purple) 11/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
OPTICAL ACCESSORIES Not available with WET option CL - Clear glass lens HL - Honeycomb louver* SL - Softening glass lens* RS - Linear spread glass lens* CG - Cylindrical glass (frosted)** HA - Halo glass** DG - Dropped halo glass** *Available with TRL trimless version only, maximum of two combined accessories. ** Available with RD round trim shape only. Not available with TRL trimless version. Cannot be combined with any other accessories. 12/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
RS - LINEAR SPREAD GLASS LENS ORIENTATION Factory installed, round trim shape shown BOTTOM VIEW BOTTOM VIEW RS Horizontal Beam Distribution Not adjustable onsite RS Vertical Beam Distribution Not adjustable onsite Install fixture onsite according to desired beam pattern direction. 13/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.
HOW TO ORDER LASS A 1 2 3 4 5 6 7 8 9 10 11 12 1 Region: A - Americas 2 Voltage: 120-120 volts 277-277 volts Consult factory for 347 volts. 3 Output (nominal lumens): L07-700 lumens L10-1000 lumens L13-1300 lumens L20-2000 lumens 4 Color Temperature: 27K - 2700K 30K - 3000K 35K - 3500K 40K - 4000K 5 Color Rendering: 6 Optics: CR80 - CRI 80+ CR95 - CRI 95+, up to 1300 lumen output RCR80 - Radiant CRI 80+* RCR95 - Radiant CRI 95+, up to 1300 lumen output* *Radiant CRI options available for 3000K only. M - Medium distribution 40 o W - Wide distribution 60 o 7 Trim Shape: RD - Round shape SQ - Square shape (available in trimless version only) 8 Trim Finish: WH - White trim BK - Black trim NST - Nickel satin trim TRL - Trimless* *Not available with WET option. Not available for IC and CP installation types. Up to 1300 lumen output. 9 Control: NO - On/Off control DA1-0-10V dimming, 1% linear DA2-0-10V dimming, 1% logarithmic PDA1 - Pro 0-10V dimming, 0.1% linear PDA2 - Pro 0-10V dimming, 0.1% logarithmic DALI1 - DALI dimming, 0.1% linear DALI2 - DALI dimming, 0.1% logarithmic LT - Lumentalk dimming* ES - Lutron EcoSystem Enabled dimming** *1% minimum dimming value. Lumentalk dimming available for RM installation type only. Lumentalk dimming available up to 1000 lumens (CR80, RCR80, CR95 or RCR95), 1300 lumens (CR80 or RCR80). ** One EcoSystem address per fixture. 1% minimum dimming value. Lutron EcoSystem Enabled dimming available for NC installation type only. Lutron EcoSystem Enabled dimming is not available for 700 Lumens (CR95 or RCR95). Lutron EcoSystem Enabled Dimming is not available for TRL trimless version. 10 Installation Type: 11 Option: 12 RM - Remodel non-insulated ceiling NC - New construction non-insulated ceiling IC - New construction insulated ceiling* CP - New construction insulated ceiling, Chicago plenum rated option, airtight* *Insulated ceiling up to 1000 Lumens (CR80, RCR80, CR95 or RCR95), 1300 Lumens (CR80 or RCR80). Not available for TRL trimless version. WET - IP54 rating suitable for wet location Suitable for covered ceiling-mounted recessed applications only. Accessories (factory installed, not available with WET option): NA - No accessory CL - Clear glass lens HL - Honeycomb louver* SL - Softening glass lens* RS - Linear spread glass lens** CG - Cylindrical glass (frosted)*** HA - Halo glass*** DG - Dropped halo glass*** *Available with TRL trimless version only, maximum of two combined accessories. **Refer to page 13 for orientation guidelines. Available with TRL trimless version only, maximum of two combined accessories. *** Available with RD round trim shape only. Not available with TRL trimless version. Cannot be combined with any other accessories. 14/14 Copyright Lumenpulse 2015 1.877.937.3003 5-year limited warranty.