Discount Code(s): 3 PVC 0 PSI PIP Fabricated Fittings PVC 0 PSI PIP Fabricated Fittings PVC 5 PSI PIP Fabricated Fittings PVC 0, 0 & 5 PSI PIP Fabricated Fittings Visit our web site: www.spearsmfg.com See Spears On-line Catalog for most current pricing, updated daily. PRICE SCHEDULE PIP-1-030 Effective March 2, 200 Supersedes PIP-1-05
PVC 0, 0 & 5 PSI PIP Fabricated Fittings HOW TO USE THIS CATALOG Spears PVC 0, 0 & 5 psi PIP Fabricated Fittings catalog has been arranged for easy use in selection of desired products according to configuration, size, pressure, part number and pricing information. Products in this catalog are listed in columns by configuration, such as Coupling (Socket), Coupling (Gasket), etc.; and pressure classification. Similar configuration types are grouped together. A complete listing of content is located at the end of this catalog. Fittings in this catalog are for use with Plastic Irrigation Pipe (PIP) and do not have the same dimensions as Iron Pipe (IPS) products. Also note that all fitting outlets specified as 4" and under are IPS size. COLUMN HEADER INFORMATION Each product column header label identifies the following product particulars: Nominal diameter of pipe with which the fitting is to be used. NOTE: Fittings may be same size (only one size designation) or reducing (multiple sizes designated). 0 PSI, 0 PSI, or 5 PSI The pressure classification of the fitting for use with 0#, 0#, or 5# Plastic Irrigation Pipe (PIP) Discount Code (Disc Code) Identification code for applicable discount to the list price of the product. NOTE: This is a Product Group code and is not a calculation of discount. Discount codes are not the same for all products contained in this price schedule. /List Price The designated with the list price immediately underneath. PRODUCT CONFIGURATION Each group of product configuration types is headed by the product's name and configuration description of the fitting outlet connections. Configuration descriptions are defined below. Line drawing illustrations are general representations of the fittings in the group, but may not be an exact depiction of all configurations listed. The configuration description correlates to the size designation. As with the nominal size designations, only one description is given when all outlets are the same. Reducing sizes list run configuration x branch configuration. CONFIGURATION DESCRIPTIONS & PART INFORMATION Definitions of configuration descriptions and letter designation found within certain part numbers are as follows: PIP Plastic Irrigation Pipe IPS Iron Pipe Gasket (Gasketed) Elastomer gasket connection Spigot (Spig) Pipe size O.D. end Socket (Soc) Solvent Weld Socket Fipt Female Iron Pipe Thread Mipt Male Iron Pipe Thread P PIP size PXI PIP size x IPS size - PLEASE NOTE - Not all of the Fabricated Fittings listed in this price schedule are carried in Spears Distribution Center inventories. When ordering Fabricated Fittings, please check your servicing Distribution Center for availability. ALL ORDERS FOR NON-STOCKED Fabricated Fittings are NON-CANCELABLE and NON-RETURNABLE. All PIP Fabricated Fittings showing size outlets of 4" and under are IPS size on that outlet Prices subject to change without notice. Possession of this price schedule shall not be construed as an offer to sell the products listed. Product drawings are representative and may not fully reflect product configurations. Page 1 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 Repair Coupling (Gasketed) 1 Coupling (Socket) 1 292-00 2.47 292-00 1.53 292-0 199.43 292-0.17 292-0 4.0 292-10 91.53 292-2 955.54 292-0 13.9 292-0 19.47 290-0002.71 290-0003 30. 290-0004 51.47 290-0005 77.23 290-000 117.40 290-0007 2.0 290-0009 357.3 290-00.19 2929-0 70.31 Coupling (Gasket x Spigot) 1 290-00 51.47 290-009 7. 290-0070 11.3 290-0071 143. 290-0072 2.40 290-0073 371.79 290-0075 543.0 2929-023 4.2 2929-023 2.1 0 PSI 302-00 93.71 302-00 132.3 302-0 3. 302-0 292.50 302-0 435. 302-10 797.1 302-2 1147.17 302-0 90.4 302-0 17.77 300-0002.2 300-0003 3.07 300-0004 0.7 300-0005 93.71 300-000 10.4 300-0007 337.2 300-0009 590.14 300-00 7.4 3029-0 947.2 300-00 54.57 300-009 4.44 300-0070 3.54 300-0071 17. 300-0072 334.9 300-0073 453.1 300-0075 703.42 3029-023 4. 3029-023 7.13 5 PSI 332-00P 7.09 332-00P 9.5 332-0P 251.4 332-0P 34.23 332-0P 5.29 332-10P 97.73 332-2P 42.47 332-0P.41 332-0P 295.92 3329-00P 3.7 3329-00P 4.9 3329-0P 75.02 3329-0P 1.0 3329-0P 12.9 3329-10P 411.90 3329-2P.29 3329-0P 01.33 3329-0P 1192. 3329-0023P.2 3329-0023P.09 3329-023P 10.52 3329-023P 2. 3329-023P 39.31 3329-1023P 5.23 3329-223P 70.0 3329-023P.40 3329-023P 1347.90 Coupling (Gasketed) 1 0 PSI 3 290-0090 1.79 290-0091 113.2 290-0092 5.2 290-0093 12.30 290-0094 293.50 290-0095 490.22 290-0097.0 2929-02 2.91 2929-02 1.7 Reducer Coupling (Socket) x 4 x x x x 1x x1 x x 2929-532 30.42 2929-55 45.04 2929-2 1. 2929-70 90. 2929-732 145.50 2929-795 20.1 2929-5 359.73 2929-9 533.29 2929-954 733.11 0 PSI 300-0090.97 300-0091 7.3 300-0092.71 300-0093 201.4 300-0094 437.9 300-0095 517.03 300-0097 3. 3029-02 1113.23 3029-02 1391.54 3029-532 33.9 300-092 52.53 300-0931 300-0935 4.01 300-0940 17. 300-094 305.7 300-090 4. 300-099 20.00 3029-954 914. Reducer Coupling (Gasket x Spigot) x 4 x x x x 1x x1 x x 2929-53223.94 2929-5523. 2929-223 143.7 2929-7023 201.51 2929-73223 34.32 2929-79523 09.9 2929-523 903.29 2929-923 1347.93 2929-95423 1.9 300-13 75.17 300-13 7.09 300-13 4.47 300-1319 22.5 300-13 37.94 300-1 71.3 300-1344 11.42 3029-923 172.59 3029-95423 2372.9 5 PSI 3329-002P 9. 3329-002P 14.5 3329-02P 2.51 3329-02P 239.72 3329-02P 455.19 3329-102P 4.40 3329-22P 951.41 3329-02P 133. 3329-02P 1740. 3329-532PXI 3. 3329-55P 0.9 3329-2P 7.40 3329-70P 19.7 3329-732P 29.57 3329-795P 371.79 3329-5P 52.3 3329-9P 753. 3329-954P 1140. 3329-53223PXI 7.19 3329-5523P 139.07 3329-223P 2.54 3329-7023P.73 3329-73223P 4.51 3329-79523P 743.5 3329-523P.47 3329-923P 204. 3329-95423P 9.2 Made in the U.S.A. Page 2
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 0 PSI Reducer Coupling (Spigot x Gasket) x 4 x x x x 1x x1 x x 2929-53232 9.4 2929-5532 9.7 2929-232 133.1 2929-7032 192.4 2929-73232 22. 2929-79532 554.4 2929-532 52.23 2929-932 132.42 2929-95432 3.72 Reducer Coupling (Gasketed) x 4 x x x x 1x x1 x x 2929-5322 4.93 2929-552 7.42 2929-22 1.47 2929-702 253.19 2929-7322 373.51 2929-7952 7.31 2929-52 92.43 2929-92 170.34 2929-9542 2220.22 PIP X IPS Reducer (Socket) x 4 2929-532 30.42 x x x x x x 300-133 72.40 300-135 0.90 300-13 0.54 300-1392 3. 300-1397 329.5 300-1403 37.51 300-1417 90.90 3029-932 97.41 3029-95432 2220. 300-145 0.90 300-145 132.3 300-141 3. 300-145 292.50 300-1470 425.34 300-147 743.5 300-149 11.97 3029-92 19.4 3029-9542 4.00 300-3 33.9 300-37 40.14 3029-2PXI 3.70 300-3.97 300-39 1.17 300-41.07 300-40 19.49 5 PSI 3329-53232PXI 93.1 3329-5532P 7. 3329-232P 192. 3329-7032P 1.93 3329-73232P 47.5 3329-79532P 7.2 3329-532P 11.42 3329-932P 177.57 3329-95432P 72.5 3329-5322PXI.2 3329-552P.11 3329-22P 2.49 3329-702P 3.4 3329-7322P 531.42 3329-7952P 49. 3329-52P 1300.0 3329-92P 3.59 3329-9542P 3140. 3329-532PXI 3. 0 PSI 3 IPS X PIP Adapter (Socket) IPS X PIP Adapter (Gasketed) 11-1/4 Elbow (Socket) 1 290-0114.2 290-01 45.2 290-011 1.32 290-0117 1.31 290-011 179.19 290-0119 307.92 290-01 513.91 290-02 91.0 2911-0.42 11-1/4 Elbow (Gasket x Spigot) 1 290-01 2.3 290-017 133.7 290-01 200.2 290-019 2.9 290-0190 40.97 290-0191 72. 290-0193. 2911-023 13.04 2911-023.43 0 PSI 300-149 32.93 300-0 47.34 300-1 79.31 300-2 3.54 300-1747 0.30 300-174 9.1 300-1749 9.1 300-1750 25.71 300-0114 32.93 300-01 49.41 300-011 93.71 300-0117 130.1 300-011 9.34 300-0119 34.59 300-01 5.00 300-02 73.1 3011-0 925.3 300-01 0.90 300-017 149.33 300-01 2.40 300-019 319.2 300-0190 5.29 300-0191 73.3 300-0193 11.20 3011-023 2.2 3011-023 2.54 5 PSI 3311-00P 40.77 3311-00P 0. 3311-0P 117.54 3311-0P 11.7 3311-0P 25.2 3311-10P 453.1 3311-2P 73.1 3311-0P 23.92 3311-0P 03.4 3311-0023P 117.51 3311-0023P 174. 3311-023P 25.59 3311-023P 371.01 3311-023P.13 3311-1023P 3.1 3311-223P 74.74 3311-023P.4 3311-023P 3295.17 Page 3 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 11-1/4 Elbow (Gasketed) 1 Elbow (Socket) 1 290-02 2.3 290-01 133.7 290-02 200.2 290-03 2.9 290-04 40.97 290-02 72. 290-07. 2911-02 13.04 2911-02.43 290-0234.2 290-0235 45.2 290-023 1.32 290-0237 1.31 290-023 179.19 290-0239 307.92 290-01 513.91 290-02 91.0 291-0.42 Elbow (Gasket x Spigot) 1 290-030 2.3 290-0307 133.7 290-030 200.2 290-0309 2.9 290-03 40.97 290-0311 72. 290-0313. 291-023 13.04 291-023.43 0 PSI 300-02 0.90 300-01 149.33 300-02 2.40 300-03 319.2 300-04 5.29 300-02 73.3 300-07 11.20 3011-02 2.2 3011-02 2.54 300-0234 32.93 300-0235 49.41 300-023 93.71 300-0237 130.1 300-023 9.34 300-0239 34.59 300-01 5.00 300-02 73.1 301-0 925.3 300-030 0.90 300-0307 149.33 300-030 2.40 300-0309 319.2 300-03 5.29 300-0311 73.3 300-0313 11.20 301-023 2.2 301-023 2.54 5 PSI 3311-002P 117.51 3311-002P 174. 3311-02P 25.59 3311-02P 371.01 3311-02P.13 3311-102P 3.1 3311-22P 74.74 3311-02P.4 3311-02P 3295.17 331-00P 40.77 331-00P 0. 331-0P 117.54 331-0P 11.7 331-0P 25.2 331-10P 453.1 331-2P 73.1 331-0P 23.92 331-0P 03.4 331-0023P 117.51 331-0023P 174. 331-023P 25.59 331-023P 371.01 331-023P.13 331-1023P 3.1 331-223P 74.74 331-023P.4 331-023P 3295.17 Elbow (Gasketed) 1 0 PSI 3 22-1/2 Elbow (Socket) 1 290-0 2.3 290-0331 133.7 290-0332 200.2 290-0333 2.9 290-0334 40.97 290-0335 72. 290-033.72 291-02 13.04 291-02.43 290-0354.2 290-0355 45.2 290-035 1.32 290-0357 1.31 290-035 179.19 290-0359 307.92 290-031 513.91 290-032 91.0 291-0.42 22-1/2 Elbow (Gasket x Spigot) 1 290-042 2.3 290-04 133.7 290-042 200.2 290-0429 2.9 290-0430 40.97 290-0431 72. 290-0433. 291-023 13.04 291-023.43 0 PSI 300-0 0.90 300-0331 149.33 300-0332 2.40 300-0333 319.2 300-0334 5.29 300-0335 73.3 300-033 11.20 301-02 2.2 301-02 2.54 300-0354 32.93 300-0355 49.41 300-035 93.71 300-0357 130.1 300-035 9.34 300-0359 34.59 300-031 5.00 300-032 73.1 301-0 925.3 300-042 0.90 300-04 149.33 300-042 2.40 300-0429 319.2 300-0430 5.29 300-0431 73.3 300-0433 11.20 301-023 2.2 301-023 2.54 5 PSI 331-002P 117.51 331-002P 174. 331-02P 25.59 331-02P 371.01 331-02P.13 331-102P 3.1 331-22P 74.74 331-02P.4 331-02P 3295.17 331-00P 40.1 331-00P 0.17 331-0P 117.54 331-0P 11.7 331-0P 25.2 331-10P 453.1 331-2P 73.1 331-0P 23.92 331-0P 03.4 331-0023P 117.51 331-0023P 174. 331-023P 25.59 331-023P 371.01 331-023P.13 331-1023P 3.1 331-223P 74.74 331-023P.4 331-023P 3295.17 Made in the U.S.A. Page 4
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 22-1/2 Elbow (Gasketed) 1 30 Elbow (Socket) 1 290-0450 2.3 290-0451 133.7 290-0452 200.2 290-0453 2.9 290-0454 40.97 290-0455 72. 290-0457. 291-02 13.04 291-02.43 290-0474 42.20 290-0475 3.7 290-047 9.2 290-0477 142.09 290-047 2.50 290-0479 3.4 290-041 593.23 290-042 192.1 29-0. 30 Elbow (Gasket x Spigot) 1 290-054 2.9 290-0547 4.47 290-054 7.2 290-0549 292.50 290-0550 595.29 290-0551 3. 290-0553 4.20 29-023 1999.34 29-023 01.23 0 PSI 300-0450 0.90 300-0451 149.33 300-0452 2.40 300-0453 319.2 300-0454 5.29 300-0455 73.3 300-0457 11.20 301-02 2.2 301-02 2.54 300-0474 44.2 300-0475 77.23 300-047 11.3 300-0477 173.02 300-047 2.0 300-0479 44.00 300-041 723.02 300-042 197.1 30-0 209.3 300-054 11.44 300-0547 17. 300-054 0.99 300-0549 342.9 300-0550 94.1 300-0551 93.54 300-0553 4. 30-023 41.72 30-023 32. 5 PSI 331-002P 117.51 331-002P 174. 331-02P 25.59 331-02P 371.01 331-02P.13 331-102P 3.1 331-22P 74.74 331-02P.4 331-02P 3295.17 33-00P 5.4 33-00P 95.3 33-0P 144.73 33-0P 191.90 33-0P 332.4 33-10P 51.2 33-2P 9.44 33-0P 205.01 33-0P 2311.2 33-0023P 141.42 33-0023P 199.57 33-023P 22.23 33-023P 403.03 33-023P 775.51 33-1023P 29.9 33-223P 1750.7 33-023P 239.91 33-023P 391.53 30 Elbow (Gasketed) 1 45 Elbow (Socket) 1 0 PSI 3 290-0570 2.9 290-0571 4.47 290-0572 7.2 290-0573 292.50 290-0574 595.29 290-0575 3. 290-0577 4.20 29-02 1999.5 29-02 01.23 290-0592 42.20 290-0593 3.7 290-0594 9.2 290-0595 142.09 290-059 2.50 290-0597 3.4 290-0599 593.23 290-000 192.1 2917-0. 45 Elbow (Gasket x Spigot) 1 290-05 2.9 290-059 4.47 290-00 7.2 290-01 292.50 290-02 595.29 290-03 3. 290-05 4.20 2917-023 1999.5 2917-023 01.23 0 PSI 300-0570 11.44 300-0571 17. 300-0572 0.99 300-0573 342.9 300-0574 94.1 300-0575 93.54 300-0577 4. 30-02 41.72 30-02 32. 300-0592 44.2 300-0593 77.23 300-0594 11.3 300-0595 173.02 300-059 2.0 300-0597 44.00 300-0599 723.02 300-000 197.1 3017-0 209.3 300-05 11.44 300-059 17. 300-00 0.99 300-01 342.9 300-02 94.1 300-03 93.54 300-05 4. 3017-023 41.72 3017-023 32. 5 PSI 33-002P 141.42 33-002P 199.57 33-02P 22.23 33-02P 403.03 33-02P 775.51 33-102P 29.9 33-22P 1750.7 33-02P 239.91 33-02P 391.53 3317-00P 5. 3317-00P 95.3 3317-0P 144.73 3317-0P 191.90 3317-0P 332.4 3317-10P 51.2 3317-2P 9.44 3317-0P 205.01 3317-0P 2311.2 3317-0023P 141.42 3317-0023P 199.57 3317-023P 22.23 3317-023P 403.03 3317-023P 775.51 3317-1023P 29.9 3317-223P 1750.7 3317-023P 239.91 3317-023P 391.53 Page 5 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 45 Elbow (Gasketed) 1 0 Elbow (Socket) 1 0 PSI 3 290-00 2.9 290-01 4.47 290-02 7.2 290-03 292.50 290-04 595.29 290-05 3. 290-07 4.20 2917-02 1999.5 2917-02 01.23 290-0702 1.9 290-0703 13.00 290-0704 22.5 290-0705 291.42 290-070 4. 290-0707 731.23 290-0709 1144.22 290-07 2557.33 29-0.2 0 Elbow (Gasket x Spigot) 1 290-07 3.54 290-079 195.9 290-0770 291.42 290-0771 39.52 290-0772 70.0 290-0773 75.03 290-0775 147. 29-023 2949.03 29-023 4001.51 0 PSI 300-00 11.44 300-01 17. 300-02 0.99 300-03 342.9 300-04 94.1 300-05 93.54 300-07 142.07 3017-02 41.72 3017-02 32. 300-0702 119.47 300-0703 1.49 300-0704 25.71 300-0705 372.79 300-070 577.79 300-0707 0.97 300-0709 137.29 300-07 3049.3 30-0 3234.7 300-07 133.7 300-079 4.20 300-0770.57 300-0771 49.3 300-0772 959. 300-0773 1475.7 300-0775 22.39 30-023 3351.40 30-023 434.9 5 PSI 3317-002P 141.42 3317-002P 199.57 3317-02P 22.23 3317-02P 403.03 3317-02P 775.51 3317-102P 29.9 3317-22P 1750.7 3317-02P 239.91 3317-02P 391.53 33-00P 14. 33-00P 4.90 33-0P 29.0 33-0P 35. 33-0P 1.20 33-10P 1131. 33-2P 1704.53 33-0P 32.32 33-0P 357.17 33-0023P 197.02 33-0023P 255.9 33-023P 395.40 33-023P 5. 33-023P 2.4 33-1023P 00.1 33-223P 5.7 33-023P 4190.57 33-023P 5509.4 0 Elbow (Gasketed) 1 90 Elbow (Socket) 1 0 PSI 3 290-0790 3.54 290-0791 195.9 290-0792 291.42 290-0793 39.52 290-0794 70.0 290-0795 75.03 290-0797 147. 29-02 2949.03 29-02 4001.51 290-0 1.9 290-013 13.00 290-014 22.5 290-0 291.42 290-01 4. 290-017 731.23 290-019 1144.22 290-020 2557.33 290-0.2 90 Elbow (Gasket x Spigot) 1 290-07 3.54 290-079 195.9 290-00 291.42 290-01 39.52 290-02 70.0 290-03 75.03 290-05 147. 290-023 2949.03 290-023 4001.51 0 PSI 300-0790 133.7 300-0791 4.20 300-0792.57 300-0793 49.3 300-0794 959. 300-0795 1475.7 300-0797 22.39 30-02 3351.40 30-02 434.9 300-0 119.47 300-013 1.49 300-014 25.71 300-0 372.79 300-01 577.79 300-017 0.97 300-019 137.29 300-020 3049.3 300-0 3234.7 300-07 133.7 300-079 4.20 300-00.57 300-01 49.3 300-02 959. 300-03 1475.7 300-05 22.39 300-023 3351.40 300-023 434.9 5 PSI 33-002P 197.02 33-002P 255.9 33-02P 395.40 33-02P 5. 33-02P 2.4 33-102P 00.1 33-22P 5.7 33-02P 4190.57 33-02P 5509.4-00P 14. -00P 4.93-0P 29.0-0P 35. -0P 1.20-10P 1131. -2P 1704.53-0P 32.32-0P 357.17-0023P 197.02-0023P 255.9-023P 395.40-023P 5. -023P 2.4-1023P 00.1-223P 5.7-023P 4190.57-023P 5509.4 Made in the U.S.A. Page
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 90 Elbow (Gasketed) Tee (Socket) 1 x 2 x 3 x 4 x 2 x 3 x 4 x x 2 x 3 x 4 x x x 2 x 3 x 4 x x 0 PSI 3 290-0900 3.54 290-0901 195.9 290-0902 291.42 290-0903 39.52 290-0904 70.0 290-0905 75.03 290-0907 147. 290-02 2949.03 290-02 4001.51 290-2502 75.17 290-99 52.53 290-2500 5.1 290-2501 5.9 290-2507 9.4 290-2503 4.7 290-2504 290-2505 1.32 290-250 9.77 290-2513 17.42 290-250 94.73 290-2509 4.01 290-25 0.50 290-2511 132.3 290-25 3.4 290-2520 25.71 290-2514 5.2 290-25 14.32 290-251 17. 290-2517 177.11 290-251 209.0 0 PSI 300-0900 133.7 300-0901 4.20 300-0902.57 300-0903 49.3 300-0904 959. 300-0905 1475.7 300-0907 22.39 300-02 3351.40 300-02 434.9 300-2502 9.94 300-99 0.7 300-2500 4.7 300-2501 7.94 300-2507 132.3 300-2503 75.17 300-2504 1.32 300-2505.59 300-250 9.1 300-2513 3. 300-250 4.01 300-2509 132.3 300-25 135.92 300-2511 139.03 300-25.39 300-2520 339.3 300-2514 0.31 300-25 10. 300-251 199.79 300-2517 7.2 300-251 25.43 5 PSI -002P 197.02-002P 255.9-02P 395.40-02P 5. -02P 2.4-102P 00.1-22P 5.7-02P 4190.57-02P 5509.4 1-00P 90.43 1-52PXI.20 1-530PXI 73.39 1-532PXI 7.13 1-00P 11.29 1-57PXI 2.4 1-50PXI 1.07 1-52PXI 1.23 1-55P 0.20 1-0P 0.1 1-PXI 142.9 1-23PXI 11.93 1-PXI 17.43 1-2P 205.3 1-2P 255.02 1-0P 425.47 1-1PXI 2.09 1-3PXI 7.9 1-4PXI 3.51 1-P 299.3 1-P 354.39 Tee (Socket) (continued) x x 2 x 3 x 4 x x x x 1 1x 2 1x 3 1x 4 1x 1x 1x 1x 1x x 2 x 3 x 4 x x x x x x1 x 2 x 3 0 PSI 3 290-2519 0.99 290-252 497.42 290-25 231.73 290-2522 4.09 290-2523 251.29 290-25 2.9 290-2525 3.13 290-252 357.3 290-25 40.3 290-2537 770.37 290-2529 402.53 290-2530 4.0 290-2531 459.32 290-2532 472.71 290-2533 492.30 290-2534 520.09 290-2535 575.72 290-253 7.3 290-255 14.29 290-254 53.5 290-2549 597.79 290-2550 17.93 290-2551 55.02 290-2552 99.29 290-2553 745.4 290-2554 1.73 290-2555 900.14 290-255 50.49 290-2570 1940.40 290-2559 770.37 290-250 19.7 0 PSI 300-2519 295.5 300-252 54.99 300-25 0.4 300-2522 25.2 300-2523 297.4 300-25 3.49 300-2525 3.4 300-252 433.0 300-25 47.1 300-2537 9.07 300-2529 439.73 300-2530 451.07 300-2531 49.42 300-2532 513.91 300-2533 535.54 300-2534 575.72 300-2535 3.7 300-253.01 300-255 172.59 300-254 733.2 300-2549 73.43 300-2550 74. 300-2551 905.2 300-2552 932.0 300-2553 97.07 300-2554 97.3 300-2555 1119.50 300-255 79.19 300-2570 223.02 300-2559 9.44 300-250 959. 5 PSI 1-70P 393.19 1-0P 70.0 1-7PXI 339.3 1-723PXI 31.53 1-7PXI 373.4 1-72P 423.29 1-72P 47.1 1-730P 550.99 1-732P 3.00 1-10P 79.19 1-71PXI 53.5 1-73PXI 00.42 1-74PXI 39.57 1-7P 55.02 1-7P 731.23 1-790P 799.20 1-792P 9.07 1-795P 45.39 1-2P 190.39 1-41PXI 34.22 1-43PXI 4.7 1-44PXI 5.73 1-4P.51 1-4P 57.72 1-50P 17.17 1-52P 1377.01 1-55P 73.72 1-5P 1795.1 1-0P 2.49 1-901PXI 93.54 1-903PXI 32.99 Page 7 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings Tee (Socket) (continued) x 4 x x x x x x1 x x 4 x x x x x x1 x x 0 PSI 3 290-251.1 290-252 9.52 290-253 972. 290-254 01.0 290-255 2.4 290-25 11.50 290-257 1353.32 290-259 22.20 2901-0 2939.57 2901-934 4.07 2901-93.7 2901-93 1177.17 2901-940 1192.77 2901-942 13.90 2901-945 143.7 2901-94 139.31 2901-951 144.34 2901-954 2351.50 Tee (Gasket x Spigot x Gasket) x 4 x 4 x x 4 x x x 4 x 290-302 4.47 290-301 133.7 290-307 195.9 290-305 14.79 290-30.39 290-3073 292.50 290-3070 255.42 290-3071 20.54 290-3072.33 290-300 403.71 290-307 297.4 290-3077 305.7 0 PSI 300-251 32.99 300-252 17.17 300-253 110.29 300-254 79.19 300-255 1377.01 300-25 00.1 300-257 197.31 300-259 11.1 3001-0 342.2 3001-934 13.92 3001-93 141.77 3001-93 1.52 3001-940 1.57 3001-942 1751. 3001-945 192.32 3001-94.57 3001-951 232.2 3001-954 2.43 5 PSI 1-904PXI 17.17 1-90P 110.29 1-90P 79.19 1-9P 1377.01 1-9P 1475.7 1-9P 3.1 1-91P 144.0 1-9P.59 1-0P 4309.13 1-934PXI 143.1 1-93P 1770.0 1-93P 19.4 1-940P 202.09 1-942P 9.0 1-945P 11.34 1-94P 32.9 1-951P 2907.17 1-954P 359.71 300-302 9.1 1-00232P 170.31 300-301 1-532232PXI 149.33 10.91 300-307 1-00232P 3. 25.09 300-305 1-52232PXI 11.23 192.23 300-30 1-55232P 191.5 2.14 300-3073 1-0232P 3.43 34.3 300-3070 1-232PXI 25.71 7. 300-3071 1-2232P 7.03 30.99 300-3072 1-2232P 297.4 335. 300-300 1-0232P 440.0 532.97 300-307 1-4232PXI 334.9 372.90 300-3077 1-232P 34.01 400.09 0 PSI 3 0 PSI Tee (Gasket x Spigot x Gasket) (continued) x x x 4 x x x x 1 1x 4 1x 1x 1x 1x 1x x 4 x x x x x x1 x x x x x x1 x 290-307 354.2 290-3079 34.59 290-30 44.72 290-303 477. 290-304 43.3 290-305 509.7 290-30 54.91 290-307 54.99 290-3097.4 290-3091 20.00 290-3092 4.2 290-3093 7.71 290-3094 754.93 290-3095 1.77 290-309 55.4 2901-2232 11.00 290-31 91.9 290-3111 972. 290-31 23.73 290-3113 55. 290-3114 1. 290-31 54.4 290-311 1419.23 2901-0232 32.79 2901-90232 250.50 2901-90232.7 2901-9232 254. 2901-9232 300.71 2901-9232 31.40 2901-91232 3.34 2901-9232 350.79 5 PSI 300-307 35.34 1-232P 42.54 300-3079 1-70232P 393.41 479.77 300-30 1-0232P 797.1 955.73 300-303 1-7232PXI 504.2 4.2 300-304 1-72232P 54.99 70.49 300-305 1-72232P 595.29 733.2 300-30 1-730232P.7 770.37 300-307 1-732232P 4.2 19.50 300-3097 1-10232P 1194.9 39.73 300-3091 1-74232PXI 91.0 49. 300-3092 1-7232P 743.5 930.01 300-3093 1-7232P 39.39 09.32 300-3094 1-790232P 7.4.2 300-3095 1-792232P 930.01 1142.20 300-309 1-795232P 92.53.47 3001-2232 1-2232P 1990. 31.4 300-31 1-44232PXI 11.97 140. 300-3111 1-4232P 1194.9 1433.4 300-31 1-4232P 5.57 02.4 300-3113 1-50232P 75.03 51.03 300-3114 1-52232P 1354.34 199.3 300-31 1-55232P 140. 132. 300-311 1-5232P 199.3 2071.19 3001-0232 1-0232P 344.00 50.9 3001-90232 1-90232P 2923.9 354.99 3001-90232 1-90232P 3032.07 343. 3001-9232 1-9232P 30.79 4095.92 3001-9232 1-9232P 317.2 47.4 3001-9232 1-9232P 3. 4494.00 3001-91232 1-91232P 344.1 47.42 3001-9232 1-9232P 32. 491.29 Made in the U.S.A. Page
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 0 PSI Tee (Gasket x Spigot x Gasket) (continued) x x x x x x1 x x Tee (Gasketed) x 4 x 4 x x 4 x x x 4 x x x x 4 x x x x 1 2901-0232 545.3 2901-93232 3225.2 2901-93232 3394.32 2901-940232 35.1 2901-942232 372.00 2901-945232 3959.3 2901-94232 414. 2901-9532 433.7 2901-954232 414.0 290-3174 4.47 290-3173 133.7 290-3179 195.9 290-3177 14.79 290-317.39 290-3 292.50 290-312 255.42 290-313 20.54 290-314.33 290-3192 403.71 290-31 297.4 290-319 305.7 290-3190 354.2 290-3191 34.59 290-0 44.72 290-3195 477. 290-319 43.3 290-3197 509.7 290-319 54.91 290-3199 54.99 290-9.4 3001-0232 090.4 3001-93232 354.9 3001-93232 343.94 3001-940232 400.34 3001-942232 47. 3001-945232 4494.00 3001-94232 4737.2 3001-9532 491.39 3001-954232 5197.7 300-3174 9.1 300-3173 149.33 300-3179 3. 300-3177 11.23 300-317 191.5 300-3 3.43 300-312 25.71 300-313 7.03 300-314 297.4 300-3192 440.0 300-31 334.9 300-319 34.01 300-3190 35.34 300-3191 393.41 300-0 797.1 300-3195 504.2 300-319 54.99 300-3197 595.29 300-319.7 300-3199 4.2 300-9 1194.9 5 PSI 1-0232P 77.19 1-93232P 402. 1-93232P 41.51 1-940232P 5034.90 1-942232P 5.51 1-945232P 54.0 1-94232P 5901.34 1-9532P 225.7 1-954232P 577.7 1-002P 170.31 1-5322PXI 10.91 1-002P 25.09 1-522P 192.23 1-552P 2.14 1-02P 34.3 1-2PXI 7. 1-22P 30.99 1-22P 335. 1-02P 532.97 1-42PXI 372.90 1-2P 400.0 1-2P 42.54 1-702P 479.77 1-02P 955.73 1-72PXI 4.2 1-722P 70.49 1-722P 733.2 1-7302P 770.37 1-7322P 22.90 1-102P 39.73 0 PSI 3 Tee (Gasketed) (continued) 1x 4 1x 1x 1x 1x 1x x 4 x x x x x x1 x x x x x x1 x x x x x x x1 x x 290-3 20.00 290-4 4.2 290-5 7.71 290-754.93 290-7 1.77 290-55.4 290-3230 11.00 290-3222 91.9 290-3223 972. 290-32 23.73 290-3225 55. 290-322 1. 290-32 54.4 290-322 1419.23 2901-02 32.79 2901-902 250.50 2901-902.7 2901-92 254. 2901-92 300.71 2901-92 31.40 2901-912 3.34 2901-92 350.79 2901-02 545.3 2901-932 3225.2 2901-932 3394.32 2901-9402 35.1 2901-9422 372.00 2901-9452 3959.3 2901-942 414. 2901-95 433.7 2901-9542 414.0 0 PSI 300-3 91.0 300-4 743.5 300-5 39.39 300-7.4 300-7 930.01 300-92.53 300-3230 1990. 300-3222 11.97 300-3223 1194.9 300-32 5.57 300-3225 75.03 300-322 1354.34 300-32 140. 300-322 199.3 3001-02 344.00 3001-902 2923.9 3001-902 3032.07 3001-92 30.79 3001-92 317.2 3001-92 3. 3001-912 344.1 3001-92 32. 3001-02 090.4 3001-932 354.9 3001-932 343.94 3001-9402 400.34 3001-9422 47. 3001-9452 4494.00 3001-942 4737.2 3001-95 491.39 3001-9542 5197.7 5 PSI 1-742PXI 49. 1-72P 930.01 1-72P 09.32 1-7902P.2 1-7922P 1142.20 1-7952P.47 1-22P 31.4 1-442PXI 140. 1-42P 1433.4 1-42P 02.4 1-502P 51.03 1-522P 199.3 1-552P 132. 1-52P 2071.19 1-02P 50.9 1-902P 354.99 1-902P 343. 1-92P 4095.92 1-92P 47.4 1-92P 4494.00 1-912P 47.42 1-92P 491.29 1-02P 77.19 1-932P 402. 1-932P 41.51 1-9402P 5034.90 1-9422P 5.51 1-9452P 54.0 1-942P 5901.34 1-95P 225.7 1-9542P 577.7 Page 9 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 0 PSI Reinforced Tee (Soc x Soc x Fipt) x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 Reinforced Tee (Soc x Spig x Fipt) x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 300-2022 5.1 300-20.97 300-2025 77.23 300-20 95.7 300-2029 0.90 300-200 9.1 300-202 130.1 300-204 10.4 300-202 171.99 300-207 199.79 300-209 2.40 300-2070 253.34 300-2072 329.29 300-2074 350.2 300-2075 375.4 300-202222 52.53 300-2022 1.79 300-202225 300-2022 4.44 300-202229 92. 300-202230 0.90 300-202232 5.5 300-202234 3.4 300-202235.71 300-202237 17.42 300-202239 4.20 300-2020 4.09 300-2022 3.49 300-2024 347.07 300-2025 39.71 5 PSI 2-7P 31.04 2-723P 401. 2-7P 411.9 2-713P 370.7 2-72313P 39.52 2-713P 40.79 0 PSI 3 0 PSI Reinforced Tee (Gasket x Spig x Fipt) x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 Reinforced Tee (Gasket x Fipt) x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 x 2 x 3 x 4 300-20232 90.1 300-20234 117.40 300-20235 2.57 300-20237 7.70 300-20239 149.33 300-202370 14.79 300-202372 191.5 300-202374 201.4 300-202375 2.07 300-202377 25.71 300-202379.33 300-20230 297.4 300-20232 371.79 300-20234 393.41 300-20235 425.34 300-2032 95.7 300-2034 117.40 300-2035 7.70 300-2037 144.17 300-2039 7.57 300-2040 19.91 300-2042 20.01 300-2044 22.2 300-2045 5.09 300-2047 292.50 300-2049 307.92 300-2050 329.5 300-2052 425.34 300-2054 440.0 300-2055 42.44 5 PSI 2-723P 452.91 2-72323P 45.39 2-723P 529. 2-72P 519.9 2-7232P 54.7 2-72P 593.3 Made in the U.S.A. Page
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 PIP X IPS Tee (Socket) Cross (Socket) x x x x x x x x x x 1.701x 1.701x 1.701x 1.701x x x x x x x x x x 2 x 3 x 4 2901-00PXI 75.17 2901-00PXI 9.4 2901-55PXI 9.77 2901-0PXI 17.42 2901-2PXI 132.3 2901-2PXI 3.4 2901-0PXI 25.71 2901-PXI 177.11 2901-PXI 209.0 2901-70PXI 0.99 2901-72PXI 2.9 2901-72PXI 3.13 2901-730PXI 357.3 2901-732PXI 40.3 2901-790PXI 520.09 2901-792PXI 575.72 2901-7PXI 472.71 2901-7PXI 492.30 2901-4PXI 55.02 2901-4PXI 99.29 2901-50PXI 745.4 2901-52PXI 1.73 2901-90PXI 9.52 2901-90PXI 972. 2901-9PXI 01.0 2901-9PXI 2.4 290-32 5.47 290-323 4.7 290-3 71.0 290-325 77.23 0 PSI 3001-00PXI 9.94 3001-00PXI 132.3 3001-55PXI 9.1 3001-0PXI 3. 300-2 139.03 3001-2PXI.39 3001-0PXI 339.3 300-2599 7.2 300-207 25.43 3001-70PXI 295.5 300-0 3.49 300-09 3.49 3001-730PXI 433.0 300-7 47.1 3001-790PXI 575.72 3001-792PXI 3.7 3001-7PXI 513.91 3001-7PXI 535.54 3001-4PXI 904.97 3001-4PXI 932.0 3001-50PXI 97.07 3001-52PXI 97.3 3001-90PXI 17.17 3001-90PXI 110.29 3001-9PXI 79.19 3001-9PXI 1377.01 300-32 11.44 300-323 75.17 300-3 4.44 300-325 90.1 5 PSI 1-00PXI 90.43 1-00PXI 11.29 1-55PXI 0.20 1-0PXI 0.1 1-2PXI 205.3 1-2PXI 255.02 1-0PXI 425.47 1-PXI 299.3 1-PXI 354.39 1-70PXI 393.19 1-72PXI 423.29 1-72PXI 47.1 1-730PXI 550.99 1-732PXI 3.00 1-790PXI 799.20 1-792PXI 9.07 1-7PXI 55.02 1-7PXI 731.23 1-4PXI.51 1-4PXI 57.72 1-50PXI 17.17 1-52PXI 1377.01 1-90PXI 110.29 1-90PXI 79.19 1-9PXI 1377.01 1-9PXI 1475.7 3-00P 147.3 3-52PXI 91.73 3-530PXI 99.07 3-532PXI 4. 0 PSI 3 Cross (Socket) (continued) x 2 x 3 x 4 x x 2 x 3 x 4 x x x 2 x 3 x 4 x x x x 2 x 3 x 4 x x x x 1 1x 2 1x 3 1x 4 1x 290-3291 145.19 290-3 0.30 290-32 7.50 290-329 93.71 290-3290 9.1 290-3297.13 290-3292 3.54 290-3293 132.3 290-3294 14.32 290-3295 17. 290-329 19. 290-4 32.07 290-329.39 290-3299 204.93 290-0 209.0 290-1 2.50 290-2.57 290-3 307.92 290-33 39.57 290-3313.57 290-3314 25.71 290-33.07 290-331 305.7 290-3317 31.53 290-331 41.13 290-3319 492.30 290-3342 17.17 290-3332 391.34 290-3333 401. 290-3334 41.09 290-3335 445.93 0 PSI 300-3291 173.02 300-3 9.77 300-32.0 300-329 113.2 300-3290 130.1 300-3297 297.4 300-3292.73 300-3293 0.31 300-3294 10.4 300-3295 10. 300-329 9.34 300-4 450.07 300-329 19.49 300-3299 207.02 300-0 22.5 300-1 9. 300-2 290.43 300-3 350.1 300-33 775.51 300-3313 295.5 300-3314 313. 300-33.31 300-331 354.2 300-3317 405.7 300-331 504.2 300-3319 590.14 300-3342 54.4 300-3332 45.30 300-3333 479.94 300-3334 490.22 300-3335 529.3 5 PSI 3-00P 3.32 3-57PXI 111. 3-50PXI 4.72 3-52PXI 141. 3-55P 11.7 3-0P 345.4 3-PXI 144.2 3-23PXI 13.29 3-PXI 19.44 3-2P 222.3 3-2P 1.77 3-0P 555.73 3-1PXI 0.0 3-3PXI.47 3-4PXI 20.09 3-P 30.3 3-P 31.04 3-70P 432.14 3-0P 9.73 3-7PXI 345.01 3-723PXI 37.94 3-7PXI 391.34 3-72P 405.7 3-72P 554.09 3-730P 71.49 3-732P 77. 3-10P 9.43 3-71PXI 597.31 3-73PXI 30.31 3-74PXI 9.40 3-7P 73.43 Page 11 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 Cross (Socket) (continued) 1x 1x 1x 1x x 2 x 3 x 4 x x x x x x1 x 2 x 3 x 4 x x x x x x1 x x 4 x x x x 290-333 494.34 290-3337 545.4 290-333 37.51 290-3340 772.44 290-337 134.51 290-3355 597.31 290-335 23.09 290-3357 59.13 290-335 701.33 290-3359 75.01 290-19.7 290-331 917. 290-333 52.57 290-335 1.4 290-331 233.9 290-33 23.92 290-339 5. 290-3370 917. 290-3371 995.91 290-3372 57.72 290-3373 1131. 290-3374 29.9 290-337 1475.7 290-337 172.59 290-1991.7 2920-0 353.17 2920-934 1113.23 2920-93 07.77 2920-93 2.30 2920-940 1370.0 2920-942 149.2 0 PSI 300-333 57.1 300-3337.19 300-333 775.51 300-3340 0.31 300-337 20.01 300-3355 72. 300-335 03.31 300-3357 3. 300-335 5.73 300-3359 959. 300-57.72 300-331 110.29 300-333 1377.01 300-335 147. 300-331 54.01 300-33 9.73 300-339 29.91 300-3370 2.4 300-3371 13.49 300-3372 54.4 300-3373 1353.32 300-3374 00.1 300-337 197.31 300-337 197.1 300-233.9 3020-0 419.4 3020-934 13.74 3020-93 1399.0 3020-93 20.77 3020-940 139.5 3020-942 11.00 5 PSI 3-7P 3. 3-790P 959. 3-792P 7.0 3-795P 91.53 3-2P 59.47 3-41PXI 72.73 3-43PXI 5.73 3-44PXI 9.73 3-4P 7.99 3-4P 110.29 3-50P 1303. 3-52P 1451.17 3-55P 172.59 3-5P 2041.31 3-0P 377.07 3-901PXI 29.91 3-903PXI 7. 3-904PXI 1131. 3-90P 05.01 3-90P 132.59 3-9P 1475.7 3-9P 3.1 3-9P 144.0 3-91P 23.32 3-9P 20.9 3-0P 5419.32 3-934P 1703.51 3-93P 120.01 3-93P 1977.3 3-940P 32.00 3-942P 233.0 0 PSI 3 Cross (Socket) (continued) x x1 x x Cross (Gasketed) x 4 x 4 x x 4 x x x 4 x x x x 4 x x x x 1 1x 4 1x 1x 1x 1x 2920-945 177.43 2920-94 20.9 2920-951 13.49 2920-954 230.4 290-4001 205.93 290-4000 190.1 290-400 2.3 290-4004 229.54 290-4005.2 290-40 42.42 290-4009 305.0 290-40 334.9 290-4011 35.94 290-4019 14. 290-40 370.7 290-401 401. 290-4017 453.1 290-401 525.23 290-403 959. 290-4030 55.1 290-4031 597.31 290-4032 9.40 290-4033 772.44 290-4034 20. 290-4057 1475.7 290-4049 23.92 290-4050 9.02 290-4051 09.32 290-4052 1.41 290-4053 114.43 0 PSI 3020-945 205.3 3020-94 233. 3020-951 230.50 3020-954 3335.4 300-4001 2. 300-4000 195.9 300-400 305.7 300-4004 23.4 300-4005.77 300-40 430.49 300-4009 30.97 300-40 345.01 300-4011 3.22 300-4019 39.57 300-40 39.52 300-401 432.53 300-4017 494.34 300-401 55.1 300-403 17.17 300-4030 700.34 300-4031 74. 300-4032 79.17 300-4033 75.43 300-4034 97.43 300-4057 172.59 300-4049 92.94 300-4050 29.91 300-4051 1132.91 300-4052 35.93 300-4053 133. 5 PSI 3-945P 3.03 3-94P 305.5 3-951P 31.23 3-954P 4335.2 3-002P 254.54 3-5322PXI.94 3-002P 37. 3-522PXI 29.22 3-552P 31. 3-02P 507. 3-2PXI 34. 3-22P 34.71 3-22P 432.31 3-02P 79.2 3-42PXI 504.22 3-2P 53.9 3-2P 551.1 3-702P 52.52 3-02P 1390.3 3-72PXI 744. 3-722P 774.94 3-722P 23.92 3-7302P 92.94 3-7322P 17.17 3-102P 11.3 3-742PXI 947.50 3-72P 7.52 3-72P 1149.1 3-7902P 79.94 3-7922P 1400.73 Made in the U.S.A. Page
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 Cross (Gasketed) (continued) 1x x 4 x x x x x x1 x 4 x x x x x x1 x x 4 x x x x x x1 x x 2920-7952 1355.01 290-402 43.01 290-4072 131.30 290-4073 14.97 290-4074 44.7 290-4075 199.3 290-407 1905.3 290-407 11.3 290-400 225.4 2920-02 430.1 2920-9042.3 2920-902 25.3 2920-902 9.4 2920-92 235.1 2920-92 3050.97 2920-92 3535.11 2920-912 3905.47 2920-92 4491.50 2920-02 441.1 2920-9342 3020.39 2920-932 3047.57 2920-932 32.71 2920-9402 3543.1 2920-9422 313.71 2920-9452 441.4 2920-942 42. 2920-95 514.37 2920-9542 07.20 0 PSI 3020-7952 23. 300-402 3253.11 300-4072 2230.4 300-4073 2317.11 300-4074 17.31 300-4075 255.1 300-407 29.39 300-407 9.91 300-400 3113.2 3020-02 553.07 3020-9042 25.73 3020-902 11. 3020-902 2911.4 3020-92 3149.49 3020-92 339.02 3020-92 39.50 3020-912 433.1 3020-92 4990.94 3020-02 925.20 3020-9342 335.43 3020-932 3371.5 3020-932 340.40 3020-9402 393.02 3020-9422 423.39 3020-9452 4909.39 3020-942 54.13 3020-95 237.2 3020-9542 902.1 5 PSI 3-7952P 1799.34 3-22P 3442.4 3-442PXI 1.79 3-42P 29.2 3-42P 7.91 3-502P 23.94 3-522P 301.04 3-552P 3034.59 3-52P 3193.3 3-02P 902.04 3-9042PXI 335.4 3-902P 339.4 3-902P 33.72 3-92P 3935.93 3-92P 4235.13 3-92P 4909.54 3-912P 54.13 3-92P 237.2 3-02P 143.02 3-9342PXI 4195.91 3-932P 4257.39 3-932P 4550.0 3-9402P 49.31 3-9422P 529.4 3-9452P 137.1 3-942P 779.04 3-95P 779.9 3-9542P.9 0 PSI 3 PIP X IPS Cross (Socket) x x x x x x x x x x 1.701x 1.701x 1.701x 1.701x x x x x x x x x 2920-00PXI 5.47 2920-00PXI 145.19 2920-55PXI 9.1 2920-0PXI.13 2920-2PXI 17. 2920-2PXI 19. 2920-0PXI 32.07 2920-PXI 2.50 2920-PXI.57 2920-70PXI 307.92 2920-72PXI 305.7 2920-72PXI 31.53 2920-730PXI 41.13 2920-732PXI 492.30 2920-790PXI 545.4 2920-792PXI 37.51 2920-7PXI 445.93 2920-7PXI 494.34 2920-4PXI 734.7 2920-4PXI 75.01 2920-50PXI 19.7 2920-52PXI 917. 2920-90PXI 995.91 2920-90PXI 57.72 2920-9PXI 1131. 2920-9PXI 29.9 0 PSI 3020-00PXI 11.44 3020-00PXI 173.02 3020-55PXI 130.1 3020-0PXI 297.4 300-3700 10. 3020-2PXI 9.34 3020-0PXI 450.07 3020-PXI 9. 3020-PXI 290.43 3020-70PXI 350.1 3020-72PXI 354.2 3020-72PXI 405.7 3020-730PXI 504.2 3020-732PXI 590.14 3020-790PXI.19 3020-792PXI 775.51 3020-7PXI 529.3 3020-7PXI 57.1 3020-4PXI 5.73 3020-4PXI 959. 3020-50PXI 57.72 3020-52PXI 110.29 3020-90PXI 13.49 3020-90PXI 54.4 3020-9PXI 1353.32 3020-9PXI 00.1 5 PSI Wyes (Socket 0 PSI Material Non Pressure Rated) x 4 x 4 2975-00.1 2975-532 91.47 2975-00 172.2 2975-52 149.3 3-00PXI 147.3 3-00PXI 3.32 3-55PXI 11.7 3-0PXI 345.4 3-2PXI 222.3 3-2PXI 1.77 3-0PXI 555.73 3-PXI 30.3 3-PXI 51.3 3-70PXI 432.14 3-72PXI 405.7 3-72PXI 554.09 3-730PXI 71.49 3-732PXI 77. 3-790PXI 959. 3-792PXI 7.0 3-7PXI 73.43 3-7PXI 3. 3-4PXI 7.99 3-4PXI 110.29 3-50PXI 1303. 3-52PXI 1451.17 3-90PXI 05.01 3-90PXI 132.59 3-9PXI 1475.7 3-9PXI 3.1 Page 13 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 0 PSI 5 PSI Wyes (Socket 0 PSI Material Non Pressure Rated) (continued) Cap (Socket) x x 4 x x x 4 x x x x 4 x x x x 1.701 1.701x 1.701x.3 1x 4 1x 1x 1x 1 2975-55 4.14 2975-0 1.2 2975-1.50 2975-2 175.13 2975-2 223.94 2975-0 39.11 2975-4 197.51 2975-2.99 2975-4.07 2975-70 20.4 2975-0 779.53 2975-7 313.2 2975-72 335.2 2975-72 405.0 2975-730 435. 2975-732 02.2 2975-17 113.59 2975-792 77.91 2975-795 97. 2975-74 491. 2975-7 5.51 2975-7 575. 2975-790 00.4 300-7540 41.17 300-7541 52.53 300-7542 4.44 300-7543 111. 300-7545 11.23 300-7547 354.0 300-7549 541.71 0 PSI 3 Cap (Socket) (continued) Surface Reducer (Socket) x 2 x 3 x 2 x 3 x 4 x 2 x 3 x 4 x x 2 x 3 x 4 x x x 2 x 3 x 4 x x x 1x 2 1x 3 1x 4 1x 1x 1x 1x 0 PSI 300-7550 740.7 3047-0 929.5 300-2013 41.17 300-20 41.17 300-201 77.23 300-2020 77.23 300-20 77.23 300-20 97. 300-202 97. 300-20 97. 300-202 97. 300-2031 144.17 300-2033 144.17 300-2034 144.17 300-2035 144.17 300-203 144.17 300-204 22.52 300-2050 22.52 300-2051 22.52 300-2052 22.52 300-2053 22.52 300-2054 22.52 300-207 39.52 300-209 39.52 300-2070 39.52 300-2071 39.52 300-2072 39.52 300-2073 39.52 300-2074 39.52 5 PSI Made in the U.S.A. Page 14
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 0 PSI Surface Reducer (Socket) (continued) Saddle (Socket) x 2 x 3 x 4 x x x x x x 2 x 3 x 4 x 2 x 3 x 4 x x 2 x 3 x 4 x x x 2 x 3 x 4 x x x x 2 x 3 x 4 x 300-20 54.01 300-209 54.01 300-2090 54.01 300-2091 54.01 300-2092 54.01 300-2093 54.01 300-2094 54.01 300-2095 54.01 300-179 51.47 300-1797 1.79 300-104 300-1790 51.47 300-179 1.79 300-105 300-111 2.3 300-1791 51.47 300-1799 1.79 300-10 300-1 2.3 300-117 92. 300-1792 51.47 300-100 1.79 300-107 300-113 2.3 300-11 92. 300-122 2.9 300-1793 51.47 300-101 1.79 300-10 300-114 2.3 5 PSI 0 PSI 3 Saddle (Socket) (continued) 0 PSI 5 PSI x 300-119 92. x 300-123 2.9 x 300-12 113.2 1x 2 300-1794 51.47 1x 3 300-102 1.79 1x 4 300-109 1x 300-1 2.3 1x 300-120 92. 1x 300-1 2.9 1x 300-1 113.2 1x 300-129 23. NOTE: When assembling Spears Saddles to PVC pipe, Spears Manufacturing Company recommends Industrial Polychemical Service (IPS) #719 Solvent Cement and #P- Primer, or equivalent. Although good connections may be accomplished without Saddle Straps, Spears Manufacturing Company Recommends the use of clamp or strap device during the asssembly step to insure good compression between the pipe and fitting surfaces as the solvent cures. PVC Fabricated Saddle connections are designed for use in low pressure open ended systems and are not intended for use in high pressure applications. For further details, contact Spears Technical Services Department. Stub Saddle (Socket) x 2 x 3 x 4 x 2 x 3 x 4 x x 2 x 3 x 4 x x x 2 300-14 300-192 79.31 300-199 91.3 300-300-193 79.31 300-1900 91.3 300-190 113.2 300-1 300-194 79.31 300-1901 91.3 300-1907 113.2 300-19 14.32 300-17 Page Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings 0 PSI 3 Stub Saddle (Socket) (continued) 0 PSI 5 PSI x 3 300-195 79.31 x 4 300-1902 91.3 x 300-190 113.2 x 300-1913 14.32 x 300-1917 10.4 x 2 300-1 4.01 x 3 300-19 1.31 x 4 300-1903 0.50 x 300-1909 4.0 x 300-1914 14.32 x 300-191 170.94 x 300-19 225.53 1x 2 300-19 19.91 1x 3 300-197 174.04 1x 4 300-1904 2.07 1x 300-19.77 1x 300-19 2.31 1x 300-1919 329.5 1x 300-1922 30.0 1x 300-19 531.42 NOTE: When assembling Spears Saddles to PVC pipe, Spears Manufacturing Company recommends Industrial Polychemical Service (IPS) #719 Solvent Cement and #P- Primer, or equivalent. Although good connections may be accomplished without Saddle Straps, Spears Manufacturing Company recommends the use of clamp or strap device during the assembly step to insure good compression between the pipe and fitting surfaces as the solvent cures. PVC Fabricated Saddle connections are designed for use in low pressure open ended systems and are not intended for use in high pressure applications. For further details, contact Spears Technical Services Department. Flange x PIP (Socket) x.140 x.10 x.200 x.0 14x.300 354-00F 1. 354-00F 19.91 354-0F 23.91 354-0F 34.01 354-0F 922.32 0 PSI 3 Flange x PIP (Socket) (continued) 0 PSI 5 PSI 1x.300 354-1F 52.1 1x1.30 354-12F 9.43 1x1.701 354-11F 9.43 20x22.047 354-201F 34.74 x.03 354-1F 355.2 PIP =Plastic Irrigation Pipe (PIP dimensions are NOT the same as IPS dimensions.) s " through 1" are furnished with Plastic Ring. s 1" Through " are furnished with Steel Ring. Made in the U.S.A. Page 1
PVC 0, 0 & 5 PSI PIP Fabricated Fittings RECOMMENDATIONS FOR INSTALLERS & USERS Plastic piping systems should be ENGINEERED, INSTALLED, and OPERATED in accordance with ESTABLISHED DESIGN AND ENGINEERING STANDARDS AND PROCEDURES for plastic piping systems. Suitability for the intended service application should be determined by the installer and/or user prior to installation of a plastic piping system. PRIOR TO ASSEMBLY, all piping system components should be inspected for damage or irregularities. Mating components should be checked to assure that tolerances and engagements are compatible. Do not use any components that appear irregular or do not fit properly. Contact the appropriate manufacturer of the component product in question to determine usability. Consult all applicable codes and regulations for compliance prior to installation. SOLVENT WELD CONNECTIONS - Use a quality grade of primer and solvent cement formulated for the type of connection, with the CORRECT SIZE APPLICATOR. Read and follow all of the solvent cement MANUFACTURER'S APPLICATION AND CURE TIME INSTRUCTIONS THOROUGHLY. BEFORE APPLYING PRIMER AND CEMENT, appropriate safety precautions should be taken. Primer and Cement should be stored in the shade between 40 F and 1 F. Eliminate all ignition sources. Avoid breathing of vapors. Use only with adequate ventilation; explosion-proof general mechanical ventilation or local exhaust is recommended to maintain vapor concentrations below recommended exposure limits. In confined or partially enclosed areas, a NIOSH-approved organic vapor cartridge respirator with full face-piece is recommended. Containers should be kept tightly closed when not in use, and covered as much as possible when in use. Avoid frequent contact with skin; wearing PVA coated protective gloves and impervious apron are recommended. Avoid any contact with eyes; splashproof chemical goggles are recommended. THREADED CONNECTIONS - Use a quality grade thread sealant. WARNING: SOME PIPE JOINT COMPOUNDS OR TEFLON PASTES MAY CONTAIN SUBSTANCES THAT COULD CAUSE STRESS CRACKING TO PLASTIC. Spears Manufacturing Company recommends the use of Spears BLUE 75 Thread Sealant which has been tested for compatibility with Spears products. Please follow the sealant manufacturers' application/ installation instructions. Choice of an appropriate thread sealant other than those listed above is at the discretion of the installer. 1 to 2 turns beyond FINGER TIGHT is generally all that is required to make a sound plastic threaded connection. Unnecessary OVER TIGHTENING will cause DAMAGE TO BOTH PIPE AND FITTING. IMPORTANT WATER HAMMER - Spears Manufacturing Company, Inc., recommends that all PVC and CPVC plastic piping systems be designed and constructed to AVOID EXCESSIVE WATER HAMMER. Water hammer can cause damage, and failure to pipe, valves, and fittings within the piping system. PLEASE NOTE - When temperatures rise above 73 F, the tensile strength of thermoplastics decreases, thereby derating the pipe or fitting Maximum Internal Pressure. When temperatures fall below 73 F, the tensile strength of thermoplastics increases, however, the impact strength decreases. Maximum operating temperatures for PVC piping systems should not exceed 140 F. Maximum operating temperatures for CPVC piping systems should not exceed 200 F. CAUTION - Spears Manufacturing Company DOES NOT RECOMMEND the use of thermoplastic piping products for systems to transport or store compressed air or gases, or the testing of thermoplastic piping systems with compressed air or gases in above and below ground locations. The use of Spears products in compressed air or gas systems automatically voids Spears warranty for such products, and their use against our recommendation is entirely the responsibility and liability of the installer. Spears Manufacturing Company will not accept responsibility for damage or impairment of its products, or other consequential or incidental damages caused by misapplication, incorrect assembly, and/or exposure to harmful substances or conditions. NOT FOR USE WITH COMPRESSED AIR OR GASES WARNING: DO NOT USE COMPRESSED AIR OR GAS TO TEST ANY PVC OR CPVC THERMOPLASTIC PIPING PRODUCT OR SYSTEM, AND DO NOT USE DEVICES PROPELLED BY COMPRESSED AIR OR GAS TO CLEAR SYSTEMS. THESE PRACTICES MAY RESULT IN EXPLOSIVE FRAGMENTATION OF SYSTEM PIPING AND COMPONENTS CAUSING SERIOUS OR FATAL BODILY INJURY. Page 17 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings Made in the U.S.A. Page 1
PVC 0, 0 & 5 PSI PIP Fabricated Fittings Page 19 Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings Made in the U.S.A. Page 20
PVC 0, 0 & 5 PSI PIP Fabricated Fittings CONTENT CATALOG INFORMATION HOW TO USE THIS CATALOG 1 COLUMN HEADER INFORMATION 1 PRODUCT CONFIGURATION 1 CONFIGURATION DESCRIPTIONS & PART INFORMATION 1 PRODUCTS Repair Coupling Gasketed 2 Coupling Socket 2 Coupling Gasket x Spigot 2 Coupling Gasketed 2 Reducer Coupling Socket 2 Reducer Coupling Gasket x Spigot 2 Reducer Coupling Spigot x Gasket 3 Reducer Coupling Gasketed 3 PIP X IPS Reducer Socket 3 IPS X PIP Adapter Socket 3 IPS X PIP Adapter Gasketed 3 11-1/4 Elbow Socket 3 11-1/4 Elbow Gasket x Spigot 3 11-1/4 Elbow Gasketed 4 Elbow Socket 4 Elbow Gasket x Spigot 4 Elbow Gasketed 4 22-1/2 Elbow Socket 4 22-1/2 Elbow Gasket x Spigot 4 22-1/2 Elbow Gasketed 5 30 Elbow Socket 5 30 Elbow Gasket x Spigot 5 30 Elbow Gasketed 5 45 Elbow Socket 5 45 Elbow Gasket x Spigot 5 45 Elbow Gasketed 0 Elbow Socket 0 Elbow Gasket x Spigot 0 Elbow Gasketed 90 Elbow Socket 90 Elbow Gasket x Spigot 90 Elbow Gasketed 7 Tee Socket 7 Page Spears Manufacturing Company
PVC 0, 0 & 5 PSI PIP Fabricated Fittings CONTENT Tee Gasket x Spigot x Gasket Tee Gasketed 9 Reinforced Tee Soc x Soc x Fipt Reinforced Tee Soc x Spig x Fipt Reinforced Tee Gasket x Spig x Fipt Reinforced Tee Gasket x Fipt PIP X IPS Tee Socket 11 Cross Socket 11 Cross Gasketed PIP X IPS Cross Socket 13 Wyes Socket 0 PSI Material Non Pressure Rated 13 Cap Socket 14 Surface Reducer Socket 14 Saddle Socket Stub Saddle Socket Flange x PIP Socket 1 INSTALLATION INFORMATION RECOMMENDATIONS FOR INSTALLERS & USERS 17 Made in the U.S.A. Page 22
The Spears Quality Policy It is the policy and objective of Spears Manufacturing Company to produce a superior quality product suitable for its intended use, with regard to functionality, structural integrity, and conformance to established industry standards and practices. It is the commitment of this Company to do so in a manner which provides consistency of product quality, optimum availability, and superior customer service, while maintaining efficiency of operations and profitability necessary to perpetuate product improvement and customer satisfaction. Furthermore, it is recognized that the attainment of these objectives is the responsibility of all Company operations and personnel according to their respective functions. MEMBER AMERICAN SOCIETY FOR TESTING AND MATERIALS FITTINGS FABRICATED FROM NSF INTERNATIONAL CERTIFIED PIPE PACIFIC SOUTHWEST 0 Olden St. Sylmar (Los Angeles), CA 91342 (1) 34-111 (00) 2-1499 Fax (1) 37-3014 SPEARS MANUFACTURING COMPANY CORPORATE OFFICE 53 Olden St., Sylmar, CA 91342 PO Box 9203, Sylmar, CA 91392 (1) 34-111 www.spearsmfg.com ROCKY MOUNTAIN 40 Florence St. Denver, CO 023 (303) 371-9430 (00) 777-44 Fax (303) 375-954 UTAH 5395 West 20 South Salt Lake City, UT 44 (303) 371-9430 (00) 777-44 Fax (303) 375-954 SOUTHEAST 4205 Newpoint Pl., Suite 0 Lawrenceville (Atlanta), GA 30043 (7) 95-3 (00) 2-32 Fax (7) 95-542 MIDWEST 1 Gateway Ct., Suite A Bolingbrook (Chicago), IL 0440 (30) 759-7529 (00) 2- Fax (30) 759-75 NORTHWEST 43 C St. NE Suite 200 Auburn (Seattle), WA 9002 (253) 939-4433 (00) 347-73 Fax (253) 939-7557 SOUTH CENTRAL 4250 Patriot Dr., Suite 300 Grapevine (Dallas), TX 7051-2317 (972) 91-4003 (00) 441-1437 Fax (972) 91-4404 NORTHEAST 590 Industrial Dr., Suite 0 Lewisberry (Harrisburg), PA 17339-9532 (717) 93-44 (00) 233-05 Fax (717) 93-547 FLORIDA 953 Parksouth Court Orlando, FL 3237 (407) 43-190 (00) 3-390 Fax (407) 425-353 INTERNATIONAL SALES 53 Olden St. Sylmar (Los Angeles), CA 91342 (1) 34-111 Fax (1) 9-3774 Copyright 200 Spears Manufacturing Company. All Rights Reserved. Printed in the United States of America 03/0. PIP-1-030