NB: models, Codes and Specifications may be subject to change without notice. SECTION A FRONT END LOADER VALVES Valve Series Nominal PAGE WALVOIL FRONT-END LOADER VALVES SDM102 Series... 45L/Min... A 14 SDM143 Series... 80L/Min... A 15 DLM142 Series... 80L/Min... A 16 SDM102 SDM143 DLM142 NB: models, Codes and Specifications may be subject to change without notice.
FRONT-END LOADER VALVES SDM102 Series Application: Simple, compact and heavy duty design - twin section for open and closed centre. Fitted with main pressure relief and load check on each working section. Available with service valve pre-arrangement. Optional carry-over port. 16mm Ø interchangeable spools. Available with manual and remote cable control. Front-end loaders. Nominal Press. on T Model No. of Press. Price Spools L/MIN BAR BAR P.A.B.T. SDM102/2/58/18U3/LCB 2 45 250 25 3/8 $POA The above unit is fitted with a Cylinder Spools, Spring Centered, Port Reliefs on spool 2 and with Joystick. Carry-over configuration A14 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
FRONT-END LOADER VALVES SDM143 Series For Open & Closed Centre Systems Simple, compact and heavy duty design - twin section for open and closed centre. Fitted with main pressure relief and load check on each working section. A wide variety of service port valves. Optional carry-over port. 18mm Ø interchangeable spools. Available with manual and remote cable control. Model No. Spools Nom. Pressure P,A,B Pressure on T L/Min BAR BAR P & T A & B SDM143/2/2X18MASL/AET 2 80 210 25 3 / 4 1 / 2 $POA The Above Model is Open Circuit, Cylinder Spools, Spring Centered Price Options 8MA 5V08108240 Spool Position - Spring Return to Neutral(Standard) $POA 13 5V13108040 Detent in Float & Spring Return to Neutral $POA P1/P2 3XCAR208113 Port Relief Valve $POA U1/U2 3XCAR308115 Port Relief & Anti-Cavitation $POA AET 3XTAP732201 Plug - Open Centre (Standard) $POA AE XGIU536692 Plug - High Pressure (Carry Over) $POA TQ Cable Function - Please refer to Page A41 The above are add on List Prices - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A15
FRONT-END LOADER VALVES DLM142 Series For & Pressure Compensated Sytems(Load Sensed) Simple, compact and heavy duty design - twin section for hydraulic systems with load sense variable displacement pump. Available with parallel circuit only. A wide variety of service port valves. 18mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Model No. Spools Nom. Max Press. P,A,B Max Press. on T Price L/MIN BAR BAR P&T A&B DLM142/2-AP/2X18SL 2 80 250 25 3/4 1/2 $POA The Above Model is Load Sensed, Cylinder Spools and Spring Centered Options 8MA 5V08108240 Spool Positioner - Spring Return to Neutral $POA 13 5V13108040 Detent in Float & Spring Return to Neutral $POA P1/P2 3XCAR208113 Port Relief Valve $POA U1/U2 3XCAR308115 Port Relief & Anti-Cav. $POA TQ Cable Function Refer to Page A41 The above are add on List Prices - Not necessarily spare parts List A16 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
NB: models, Codes and Specifications may be subject to change without notice. SECTION A SECTIONAL VALVES Valve Series Nominal PAGE WALVOIL SECTIONAL VALVES SD6 Series... 45L/Min... A 18 SD8 Series... 80L/Min... A 19 SDS150 Series... 90L/Min... A 20 SD16 Series... 140L/Min... A 21 SD25 Series... 240L/Min... A 22 SECTIONAL SPOOLS...... A 23 SD6 SD8 SDS150 SD16 SD25 NB: models, Codes and Specifications may be subject to change without notice.
SECTIONAL VALVES SD6 Series Application: Small, compact and heavy duty design - 1 to 12 sections for open and closed centre. Fitted with main pressure relief and load checks on each section. Available with parallel, tandem or series circuit. Optional carry-over port. A wide variety of port and circuit valves. 16mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Cranes, booms for brush cutters, mini-excavators, back hoe excavators, chopping platforms and overhead platforms. Model Code No. of Spools Nom. Press. P,A,B Press. on T L/Min BAR BAR Leakage per 100BAR cc/min Tightening Torque Nm P,A, B T DIM A (mm) SD6/1/ACD/1X18/RC 1 118 $POA SD6/2/ACD/2X18/RC 2 156 $POA 45 SD6/3/ACD/3X18/RC 3 194 $POA SD6/4/ACD/4X18/RC 4 232 $POA SD6/5/ACD/5X18/RC 5 40 350 50 1 30 3 / 8 1 270 $POA / 2 SD6/6/ACD/6X18/RC 6 308 $POA SD6/7/ACD/7X18/RC 7 346 $POA SD6/8/ACD/8X18/RC 8 384 $POA SD6/9/ACD/9X18/RC 9 422 $POA 35 SD6/10/ACD/10X18/RC 10 460 $POA The above fitted with Cylinder Spools and Spring Centered. Price OPTIONS 1,2,3,4 Spool Options - refer to page A23 No Extra 11 5V11105000 Detent 3 Position $POA 15 5V15105000 Detent 2 Position 0 & 1 $POA 513 **SD6/513 4th Position Float $POA S **SD6-S Series Circuit $POA CS SD6/CS1 Mid Outlet $POA P1/P2 5KIT206113 Port Relief $POA U1/U2 5KIT306113 Port Relief & Anti-cavitation $POA RE 4TAP413210 Plug - High Pressure Carry Over $POA LCB 5CLO206100 Joystick - Mechanical $POA 8P 5V08105701 Pneumatic Pilot On/Off $POA Cable Control - refer to page A41 The above are add on List Prices - Not necessarily spare parts Prices. A18 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SECTIONAL VALVES SD8 Series Application: Simple, compact and heavy duty design - 1 to 12 sections for open and closed centre. Fitted with main pressure relief and load checks on each section. Optional power beyond port. A wide variety of port and circuit valves. 18mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Cranes, telescopic boom fork lifts, back hoe excavators and compactors. Model Code No. of Spools Nom. Press. Back Press. Leakage Per 100 BAR Tightening Torque The above Model complete with cylinder spools & spring centered. Options 1,2,3,4 Spool Options - refer to page A23 No Extra 11 5V11108000 Detent 3 Position $POA 15 5V15108000 Detent 2 Position 0 & 1 $POA RE 4TAP318010 High Pressure Carry Over $POA P1,P2 3XCAR208113 Port Relief (G3) $POA U1,U2 3XCAR308115 Port Relief & Anti Cav. (G3) $POA LCB 5CLO208000 Joystick - Mechanical $POA 8P 5V08108701 Pneumatic Pilot ON/OFF $POA 8PZ 5V08108710 Pneumatic Pilot Proportional $POA 8ES3 5V08108930 Electric ON/OFF 12VDC $POA 8ES3 5V08108960 Electric ON/OFF 24VDC $POA S **SD8-S Series Section $POA CS SD8/CS1 Mid Outlet $POA Cable Control - refer to Page A41 Dim A mm List Price L/Min BAR BAR cc/min NM P A&B T SD8/1/ACD/1X18/RC 1 128 $POA SD8/2/ACD/2X18/RC 2 169 $POA SD8/3/ACD/3X18/RC 3 210 $POA 80 315 25 1.5 30 1/2 1/2 3/4 SD8/4/ACD/4X18/RC 4 251 $POA SD8/5/ACD/5X18/RC 5 292 $POA SD8/6/ACD/6X18/RC 6 333 $POA The above are add on List Prices - Not necessarily spare parts List Prices. April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A19
SECTIONAL VALVES SDS150 Series Application: Simple, compact and heavy duty design - 1 to 12 sections for open and closed centre. Fitted with a main pressure relief and load checks on each section. Optional carry-over port. A wide variety of port and circuit valves. 20mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Travelling vehicles, agricultural loaders, forest cranes and container trailers. Model Code No. of SPOOLS Nominal Pressure Back Pressure Leakage Per 100 BAR Tightening Torque Dim A mm List Price L/Min BAR BAR cc/min NM P A&B T SDS150/1/ACD/1X18/RC 1 154 $POA SDS150/2/ACD/2X18/RC 2 199 $POA SDS150/3/ACD/3X18/RC 3 244 $POA 90 315 25 2 40 1/2 1/2 3/4 SDS150/4/ACD/4X18/RC 4 289 $POA SDS150/5/ACD/5X18/RC 5 334 $POA SDS150/6/ACD/6X18/RC 6 379 $POA The Above Model with cylinder spools and spring centred OPTIONS 1,2,3,4 Spool Options - Please refer to Page A23 No Extra 11 5V11110000 Detent 3 Position $POA 15 5V15110000 Detent 2 Position 0 & 1 $POA 513 **SDS150/513 4th Position Float $POA RE 4TAP318010 High Pressure Carry Over $POA P1,P2 5KIT210213 Port Relief (G3) $POA U1,U2 5KIT310113 Port Relief & Anti-cavitation. (G3) $POA 8P 5V08110701-10 Pneumatic Pilot ON/OFF $POA 8PZ 5V08110714 Pneumatic Pilot Prop. $POA LCB 5CLO211100 Joystick - Mechanical $POA S **SDS150-S Series Section $POA CS1 SDS150/CS Mid Outlet $POA Cable Control - Please refer to Page A41 The above are add on List Prices - Not necessarily spare parts List A20 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SECTIONAL VALVES SD16 Series Application: Simple, compact and heavy duty design - 1 to 12 sections for open and closed centre. Fitted with main pressure relief and load check. Available with parallel, tandem or series circuit. Optional carry-over port. A wide variety of port and circuit valves. 20mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Back hoe loaders, agricultural loaders, forest cranes and city trash compactors. Type Model No. of SPOOLS Nom. Press. Back Pressure Leakage Per 100 BAR Tightening Torque Dim A mm List Price L/Min BAR BAR cc/min NM P A&B T SD16/1/ACD/1X18/RC 1 170 $POA SD16/2/ACD/2X18/RC 2 218 $POA SD16/3/ACD/3X18/RC 3 266 $POA 140 315 25 3 40 3/4 3/4 1 SD16/4/ACD/4X18/RC 4 316 $POA SD16/5/ACD/5X18/RC 5 362 $POA SD16/6/ACD/6X18/RC 6 410 $POA The above Model Code complete with cylinder spools & spring centred. Options 1,2,3,4 Spool Options - refer to page A23 No Extra 11 5V11110000 Detent 3 Position $POA 15 5V15110000 Detent 2 Position 0 & 1 $POA 513 **SD16/513 4th Position Float $POA RE 4TAP318010 High Pressure Carry Over $POA P1,P2 5KIT210213 Port Relief (G3) $POA U1,U2 5KIT310113 Port Relief & Anti Cav. (G3) $POA LCB 5CLO216100 Joystick - Mechanical $POA 8P 5V0811070-10 Pneumatic Pilot ON/OFF $POA 8PZ 5V08110714 Pneumatic Pilot Proportional $POA S **SD16-S Series Section $POA CS SD16/CS Mid Outlet $POA Cable Control - Please refer to Page A41 The above are add on List Prices - Not necessarily spare parts List April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A21
SECTIONAL VALVES SD25 Series Application: Simple, compact and heavy duty design - 1 to 12 sections for open and closed centre. Fitted with main pressure relief and load check. Available with parallel, tandem and series circuit. Optional carry-over port. A wide variety of port and circuit valves. 20mm Ø interchangeable spools. Available with manual, electro-hydraulic and remote cable control. Large fork lifts for containers, crane trucks, compactors, drain machines, and earth moving equipment. Type Model No. of Spools Nom. Press. Dim A mm Back Press. Leakage Per 100 BAR Tightening Torque L/Min BAR BAR cc/min NM P A&B T The above Model complete with cylinder spools & spring centered. List Price SD25/1/ACD/1X18/RC 1 234 $POA SD25/2/ACD/2X18/RC 2 296 $POA SD25/3/ACD/3X18/RC 3 358 $POA 240 315 25 5 50 1 1 1 1/4 SD25/4/ACD/4X18/RC 4 420 $POA SD25/5/ACD/5X18/RC 5 482 $POA SD25/6/ACD/6X18/RC 6 544 $POA Options 1,2,3,4 Spool Options - refer to page A23 No Extra 11 5V11120000 Detent 3 Position $POA 15 5V15120000 Detent 2 Position 0 & 1 $POA RE 4TAP426612 High Pressure Carry Over $POA P1,P2 3XCAR216113 Port Relief (G3) $POA U1,U2 3XCAR316113 Port Relief & Anti Cav. (G3) $POA LCB 5CLO225000 Joystick - Mechanical $POA 8P 5V08120701 Pneumatic Pilot ON/OFF $POA 8PZ 5V08120709 Pneumatic Pilot Proportional $POA S SD25-S Series Section $POA CS1 SD25/CS1 Mid Outlet $POA Cable Control - Please refer to A41 The above are add on List Prices - Not necessarily spare parts List A22 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004
SECTIONAL SPOOLS SD6 SD8 SDS150 SD16 SD25 VALVE SERIES SPOOL TYPES 1 2 3 4 5 6 7 CYLINDER MOTOR SINGLE ACT- ING ON A SINGLE ACT- ING ON B 4TH POS FLOAT ALL PORTS CLOSED P CLOSED A & B TO T List Price SD6 3CU2210130 3CU2225130 3CU2231130 3CU2235100 RE NOTE 1 RE NOTE 2 RE NOTE 3 $POA SD8 3CU2310100 3CU2325100 3CU2331110 3CU2335100 RE NOTE 1 RE NOTE 2 RE NOTE 3 $POA SDS150 3CU2410120 3CU2425130 3CU2431100 3CU2435130 RE NOTE 1 RE NOTE 2 RE NOTE 3 $POA SD16 3CU2510100 3CU2525100 3CU2531100 3CU2535100 RE NOTE 1 RE NOTE 2 RE NOTE 3 $POA SD25 3CU2710100 3CU2725100 3CU2731100 3CU2735100 RE NOTE 1 RE NOTE 2 RE NOTE 3 $POA NB: The above spool prices are spare part prices and are not additional to the valve price NOTE 1 TYPE 5 (4th Position Float) * A modified section body is required & available only in a complete section NOTE 2 TYPE 6 (All Closed) * Use a Type 1 spool and configure with a plugged H.P.C.O. port NOTE 3 TYPE 7(P Closed A & B to T) * Use a Type 2 spool and configure with a plugged H.P.C.O. port April 2004 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST A23
A24 ADDITIONAL PRODUCT INFORMATION AVAILABLE ON REQUEST April 2004