MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH: 56kW (75hp) or 68.5kW (92hp) 5.46 metres (17ft 11in) MAX. LOADER CAPACITY: 1.0m 3 (1.32yd 3 ) H G F D E B C K A J STATIC DIMENSIONS JCB Backhoe Loaders feature heavy duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key. A Total travel length 5.62 (18-5) B Axle centreline distance 2.17 (7-1) C Slew centre to rear axle centre distance 1.36 (4-6) D Stabiliser feet clearance 0.37 (1-2) E Kingpost clearance 0.52 (1-8) F Steering wheel centre height 1.94 (6-4) G Cab roof height 2.91 (9-6) H Total travel clearance 3.61 (11-10) J Rear frame width 2.36 (7-9) K Shovel width 2.35 (7-8) J* Rear frame width 2.24 (7-4) K* Shovel width 2.23 (7-4) * Narrow option
GROUND LINE ANGLES STEERING Full power hydrostatic system utilising the main hydraulic pump via a steering priority valve. In the event of engine failure, emergency steering is maintained. Axles Steer drive A Approach angle 66 B Interference angle/ramp to ground plane 120 C Departure angle 20 A B C Steering turns lock to lock 2 3 4 Kerb kerb turning circle unbraked 8.1 (26-7) Kerb kerb loader clearance circle unbraked 10.4 (34-1) Turning circle braked 6.9 (22-8) Loader clearance circle braked 9.5 (31-2) (Depending on tyre size, ground conditions etc.) Operating weight includes machine equipped with 610mm excavator bucket, Extradig 6-in-1 shovel with forks and full fuel tank. OPERATING WEIGHTS kg (lb) Weight 8070 (17800) ENGINE SUPPORT SYSTEM Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals. Fuel type Diesel. Fuel filter Replaceable spin-on cartridge plus water/sediment separator. Air cleaner Dual, dry element cyclonic type. Oil filter and lubrication Full flow, spin-on type filter. Cooling system Hot climate specification, pressurised 7 psi (0.5 bar) suction fan. Pressurised recovery tank with integral filler neck. Four cylinder, direction injection diesel. Gear driven water pump, cast iron engine sump, spin-on oil and fuel filters, water separator, dual element air cleaner, thermostart cold start aid. Naturally aspirated Turbo Manufacturer JCB 1004-42 JCB 1004-40T Displacement 4.23 Ltr 3.99 Ltr No. of cylinders 4 4 Bore size mm 103 100 Stroke mm 127 127 Rated engine RPM 2200 2200 Power ratings Gross ISO/TR 14396 and SAE J1995 kw (HP) 56 (75) 68.5 (92) SAE net ISO 9249 (EEC 80/1269 and SAE J1349) kw (HP) 53.3 (71.5) 63.1 (84.5) Torque ratings ENGINE SAE gross ISO/TR 14396 and SAE J1995 Nm (lbf ft) 290 (214) 370 (233) SAE net ISO/TR 9249 (EEC 80/1269) and SAE J1349 Nm (lbf ft) 284 (210) 361 (266) Max. torque RPM 1400 1400 ELECTRICAL AND INSTRUMENTATION 12 volt negative ground, utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal. Gauges Tachometer, engine coolant temp, fuel level, hourmeter, clock. Warning system Audible and visual system for engine oil, transmission, park brake, battery, air cleaner, alternator. Battery 115 A/hr. Pre-wire Radio speakers (cab), beacon (all). Horn Controlled from both front and rear. Alternator 75 amp (85 amp option). Front working lights 2 twin beam fixed position. Rear working lights 4 adjustable.
TRANSMISSION The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronised shifting in all gears. Powershuttle between forward and reverse. Ground speeds are designed to maximise production. An optional 4 speed powershift transmission enables effortless and fast gear changes. Gears are selected through a twist grip control on the column mounted forward/reverse level Manufacturer JCB JCB Type Syncroshuttle Powershift Torque converter 305mm (12") 305mm (12") Torque converter ratio 3.0:1 2.54:1 Gears forward/reverse 4/4 4/4 Gear selection Manual Powershift Shuttle control F/R Power shuttle Power shuttle Travel speeds kph (mph) kph (mph) Tyres equipped front 12.5x18 rear 18.4x26 Gear 1 5.5 (3.4) 5.2 (3.2) Gear 2 8.9 (5.5) 9.7 (5.9) Gear 3 19.1 (11.9) 22.4 (13.8) Gear 4 36.1 (22.4) 39.5 (24.7) JCB front axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations. Type Axle ratings FRONT AXLE JCB 4WD steer drive with torque proportioning kg (lb) Static load rating 16500 (36375) Dynamic load rating 5500 (12125) Oscillation angle 16 Steering ram Powered track rod JCB rear axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations. Type Limited slip Axle ratings REAR AXLE JCB Epicyclic hub reduction with torque proportioning Option kg (lb) Static load rating 21000 (46296) Dynamic load rating 7000 (15432) CAB Excellent visibility (and safety) is provided by the extra large tinted glass areas of 6.4 sq m (70 sq ft). Cab frame is ROPS and FOPS approved for maximum operator protection. ISO standard 3471 and 3449 (SAE J1040 and J231). A fully adjustable seat with lumbar support combines with ergonomically positioned controls to minimise operator fatigue. The in-cab noise levels are the lowest in the business for maximum operator comfort. A radio location is provided as standard plus twin speakers for stereo sound. Cab provides easy access through either a single door or two door frame. Rear side windows open either partially or fully for extra ventilation. Standard features include: lap seat belt, 3 speed fresh air/recycle heater, front and rear screen wash/wipers, front and rear horn, exterior mirrors, and flat easy-clean floor. The instrument panel is positioned to the right-hand side for ease of viewing from either the loading or excavating position and has an optional lockable cover for vandal proofing. Engine speed, fuel and coolant temperature gauges, (and clock on cab builds) are mounted in the panel. A high performance air conditioning system is optionally available on turbo builds providing the operator with a cool working environment when working in high temperatures. Static or mechanical suspension seat gives the operator a comfortable operating position. An optionally available heated air suspension seat gives the operator the ultimate comfort with automatic compensation for weight. JCB PRECISION CONTROL (Optional) JCB Precision Control backhoe and loader controls offer smooth, low effort and productive operation while reducing operator fatigue. Excavator control joysticks are integrated into the seat armrests, which provides increased legroom, improved job visibility and hydraulic excavator ergonomics. The pilot loader joystick is a separate set of levers, simulating the traditional manual levers, with JCB s unique shadowing auxiliary lever providing unmatched feel and control. Best in class hydraulic modulation combined with the greatest digging performance, means that the JCB Precision Control is unmatched in any backhoe loader. *Not available on naturally aspirated engines.
LOADER DIMENSIONS LOADER ATTACHMENTS P S R V Y M N O Z U T Q X W LOADER DIMENSIONS 6-in-1 Shovel M Dump height 2.74 (9-0) N Load over height 3.20 (10-6) O Pin height 3.45 (11-4) P Pin forward reach 0.36 (1-2) Q Reach at ground (toe plate horizontal) 1.37 (4-6) R Max. reach at full height 1.15 (3-9) S Reach at full height fully dumped 0.78 (2-7) T Dig depth 0.10 (0-4) U Rollback at ground 45 V Dump angle 43 Jaw opening width 0.95 (3-1) LOADER ATTACHMENTS Direct Mount Loader buckets are listed according to size and application. All buckets are drilled to accept optional auxiliary cutting edge or teeth. Flat top box section provides rigidity and assists in bucket levelling. 6-in-1 Shovel Capacity SAE Width m Rated m 3 (yd 3 ) Struck m 3 (yd 3 ) 2235 (7-4) 1.0 (1.32) 0.83 (1.09) 2350 (7-8) 1.0 (1.32) 0.83 (1.09) LOADER ATTACHMENTS Forklift Performance and Data 6-in-1 Shovel mounted forks Quickhitch mounted forks Section width 0.08 (0-3 1 8) 0.08 (0-3 1 8) W Fork length 1.1 (3-7) 1.1 (3-7) X Reach at ground 2.66 (8-9) 2.03 (6-8) Y Reach at full height 2.25 (7-5) 1.72 (5-8) Z Fork lift height 2.92 (9-7) 3.27 (10-9) Fork spacing min 0.2 (0-8) 0.2 (0-8) Fork spacing max 2.17 (7-3) 1.03 (3-4) SWL @ 500mm load centres kg (lb) 1000 (2205) 2000 (4410) JCB loaders provide parallel lift self levelling on the up and down cycle enhancing load retention and use of optional pallet forks. High capacity buckets combined with high lift and breakout forces maximise productivity. LOADER PERFORMANCE Loader breakout of shovel kgf (lbf) 6500 (14340) Loader breakout arms kgf (lbf) 4850 (10690) Lift capacity to full height A* kg (lb) 2850 (6270) Lift capacity to full height B* kg (lb) 2800 (6160) Clamping force (A* and B*) kgf (lbf) 2940 (6480) * Type A shovel = 2235mm (7'4") / Type B shovel = 2350mm (7'8")
The JCB braking system ensures effective, fade-free braking. The self-adjusting, multi-disc arrangement is inboard mounted and is oil immersed for minimum maintenance and a long operating life. A 3 position switch allows the selection of 2 wheel drive with two wheel braking; 2 wheel drive with four wheel braking or 4 wheel drive with four wheel braking. All machines are fitted with servo assisted brakes as standard for low effort braking. Twin brake pedals provide tighter turning circle and enhanced steering control on slippery ground. Automatic compensation ensures straight machine braking. BRAKES Disc diameter: 220 mm (8.7 in). Friction area: 129,000 sq.mm (200 sq. in) per brake. The independent parking brake is mounted on the input shaft rear axle and will hold the machine on 1:3 gradients. It is an over-centre type, adjustable within the cab, with transmission disconnect to prevent premature brake pad wear. Park brake disc diameter: 280 mm (11 in). Friction area: 5416 sq.mm (8.4 sq. in). HYDRAULIC SYSTEM The Open Centre system uses twin gear pumps and Hydraulic Speed Control (HSC) with a power modulation valve that automatically varies hydraulic power to match digging conditions for extra performance and power. Open centre hydraulic system using simple and reliable high efficiency gear pumps. A Power Modulation Valve automatically varies the hydraulic power to match digging conditions to improve performance and efficiency automatically dumps one pump when 4th gear selected on powershift models. The HSC switch enables controlled use of hydraulic response depending upon application. Easily used, ergonomically positioned levers give excellent control of the loader and backhoe, thus reducing operator fatigue. An independent pump powers the Extradig dipper so that it can extend or retract without breaking the digging cycle. This allows faster cycle times and simultaneous use of the telescopic and normal excavator actions in operations such as grading and bank dressing. A full flow 10 micron filter ensures that oil stays free of contaminants. Front Rear TYRES 12.0 x 18, 10PR Industrial 12.5 x 18, 10PR Industrial 335/80 x 18, Radial Traction 400/70 x 18, Radial Industrial 12.5 x 20, 10PR Industrial 16.9 x 28, 12PR Traction or Industrial 18.4 x 26, 12PR Traction or Industrial 16.9 x 28, Radial Traction 480/80 x 26, Radial Industrial Engine Naturally aspirated Turbo Pump flows at 2200rpm l/min (gal/min) l/min (gal/min) Main pump output 73 (16) 79 (17.5) Second pump output 51 (11.5) 57 (12.5) System working pressure bar (lbf/sq in) bar (lbf/sq in) Backhoe and loader 227 (3300) 227 (3300) SMOOTH RIDE SYSTEM (Optional) SERVICE CAPACITIES The JCB Smooth Ride System (SRS) consists of a dry nitrogen and oil filled accumulator installed in line with the loader lift cylinders. When activated, the Smooth Ride System allows the loader arms to float. This action counteracts variations in road or site surfaces and provides the operator with a smooth ride. Activation Electric switch on instrument panel. Manually controlled by the operator for maximum benefit and user flexibility. JCB POWERSLIDE Exclusive to JCB, this option enables the excavator s sideshift carriage to be hydraulically powered across the rearframe by the operation of a pedal in the cab. With this feature there is no need to push the carriage across with the bucket avoiding ground damage and the need to relocate the whole machine. ltr (gal) Cooling system 23 (5) Fuel tank 160 (34.5) Engine oil with filter 10 (2.2) Transmission with filter 16 (3.5) Rear axle 16 (3.5) Front drive axle 16 (3.5) Hydraulic system incl. tank 132 (29)
BACKHOE BUCKETS Standard Profile Bucket JCB backhoe buckets are designed specifically for use on JCB machines with pin positions to maximize tearout, load retention and straight wall digging characteristics. Width* Capacity SAE Weight (+ teeth) mm (in) Rated m 3 (ft 3 ) Struck m 3 (ft 3 ) kg (lb) Teeth 305 (12) 0.06 (2 1 8) 0.05 (1 3 4) 102 (225) 3 400 (16) 0.09 (3) 0.07 (2 1 2) 109 (240) 3 457 (18) 0.12 (4 1 4) 0.09 (3) 116 (256) 3 610 (24) 0.17 (6) 0.13 (4 1 2) 140 (310) 4 800 (32) 0.24 (8 1 2) 0.17 (6) 162 (355) 5 950 (37) 0.30 (10 1 2) 0.21 (7 1 4) 198 (435) 5 * Including sidecutters. Width less sidecutters deduct 25mm (1in). BACKHOE BUCKETS Deep Profile Bucket Width* Capacity SAE Weight (+ Teeth) mm (in) Rated m 3 (ft 3 ) Struck m 3 (ft 3 ) kg (lb) Teeth 305 (12) 0.09 (3) 0.07 (2 1 2) 102 (225) 3 457 (18) 0.16 (5 1 2) 0.13 (4 1 2) 122 (269) 3 610 (24) 0.23 (8) 0.18 (6 1 4) 142 (314) 4 800 (32) 0.30 (10 1 2) 0.24 (8 1 2) 163 (359) 5 950 (37) 0.38 ( 1 2) 0.30 (10 1 2) 183 (403) 5 1100 (43) 0.48 ( 3 8) 0.34 (12) 203 (448) 6 * Including sidecutters. Width less sidecutters deduct 25mm (1in). Capacity in cu.yd. BACKHOE DIMENSIONS A SAE max dig depth Ext 5.46 (17-11) Ret 4.24 (13-11) SAE 2ft flat bottom Ext 5.43 (17-10) Ret 4.21 (13-10) Maximum dig depth with deep profile bucket Ext 5.97 (19-7) Ret 4.75 (15-7) B Reach ground level to rear wheel centre Ext 7.87 (25-10) Ret 6.72 (22-1) C Reach ground level to slew centre Ext 6.52 (21-5) Ret 5.37 (17-7) D Reach at full height to slew centre Ext 3.66 (12-0) Ret 2.74 (9-0) E Side reach to centre line of machine Ext 7.09 (23-3) Ret 5.94 (19-6) F SAE operating height Ext 6.35 (20-10) Ret 5.53 (18-2) G Maximum loadover height Ext 4.72 (15-6) Ret 3.84 (12-7) SAE loadover height Ext 4.32 (14-2) Ret 3.44 (11-3) H Total kingpost travel 1.16 (3-10) Narrow rear frame option 1.05 (3-5) J Bucket rotation Speed 201 BACKHOE PERFORMANCE Bucket tearout Dipper tearout Lift capacity of bucket pivot at full reach kgf (lbf) Speed 4940 (10870) Power 5700 (12540) Ext 2085 (4590) Ret 3010 (6620) kg (lb) Ext 990 (2108) Ret 1250 (2750)
D J F G C B A C E H
A GLOBAL COMMITMENT TO QUALITY JCB s total commitment to its products and customers has helped it grow from a one-man business into Britain s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in Europe. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of over 400 distributors and agents, the company exports over 70% of its production to all five continents. Through setting the standards by which others are judged, JCB has become one of Britain s most impressive success stories. JCB care for the environment. This paper has been JCB Sales Limited, Rocester, Staffordshire ST14 5JP. Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.co.uk produced without the use of elemental chlorine chemicals in the bleaching process. JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/4920 4/03