D/W ERIE Maximum Performance WI Turning Centers
Advantage D eries W eries MAXIMUM PERFRMANCE WI TURNING CENTER With leading technology and high quality components. Goodway wiss Turning Center provides the best solution for those work pieces smaller than mm. Additional, D & W series are not only with super rigid body, faster moving, and variety tooling selection but also available with sub-spindle, live tooling and bar-feeder to accomplish today and tomorrow s most demand. ( D- series model shown. ) Fully enclosed splashguards keep chips and coolant contained for a safe clean working environment. All spindle and servo motors, are FANUC high performance components to ensure peak machining performance and accuracy. C3 class hardened and precision ground ball screws ensure the highest accuracy and durability possible. Plus, pretension on all axes minimizes thermal distortion. The auto lubrication system delivers metered amounts of lubrication to the slide ways, ball screws, and vital components. Distribution is automatically shut off during idling to prevent waste. ptional A/C to control the electrical cabinet s temperature and humility which can extend the life of electrical components inside efficient.
Drawings Dimensions Features pecifications MACHINING VARIATIN D series Main & ub-spindle simultaneous drilling and tapping ide milling & tapping X-axis X-axis W series Main & ub-spindle simultaneous drilling and tapping ide milling & tapping Y-axis ZB-axis Y-axis XB-axis Front offset drilling and tapping Rear offset drilling and tapping ZB-axis XB-axis Main & ub-spindle simultaneous milling Y-axis Y-axis XB-axis ZB-axis Y-axis D- ub-spindle Main & ub-spindle simultaneous machining Radial live tool attachment Rear-end tool attachment pindle C-axis control Module spindle design U-drill device : tandard : ption : Not Available D-0 W-0 W-3 W-
Advantage D eries W eries D ERIE TL YTEM D series is designed with maximum performance, minimum floor space and easy to operation. Also available with live tooling, sub-spindle and C-axis to provide the mostly friendly working condition. D- Tool ystem.d. Tool I.D. Tool Radial Live Tool Rear Tool TL PT Tooling ystem.d. tool Front-end working tool Rear-end working tool Radial live tool Rear-end Tooling ystem Rear-end working tool D- *¹ *² *¹ 3*² *.D. tool : mm, live tool ER *.D. tool : 0 mm, live tool ERx, ERx ( Max. ) D-0 ( Max. )
Drawings Dimensions Features pecifications D series is design with pneumatic system instead of hydraulic system to achieve our goal that with environment friendly, safety and easy to maintenance. 3 X and ZB axes, the guide ways is dovetail box way that made under heat treatment and super high precision grinding. And the slide ways are bonded with Turcite B to eliminate stick-slip, minimize wear and maintain long term accuracy. ther axes are using high precision linear guide way. It provides high accuracy positioning no matter it is in high or low speed. pindle utput Torque D- pindle utput utput Torque D- ub-spindle utput utput ( N-m ) ( kw ) ( N-m ) ( kw ) 3.7 kw ( min. ). 3. 0 3 3. kw ( min. ). 0 0. kw ( cont. ).7 Torque ( min. ) 00 00 000 700 0000rpm 0 Torque ( min. ) 0.8 0. kw ( cont. ) 0. 000 000 000 8000 rpm Torque D-0 pindle utput utput Torque D-0 ub-spindle utput utput ( N-m ) ( kw ) ( N-m ) ( kw ) 3.7 kw ( min. ). 0 3 3 Torque ( 30 min. ). kw ( cont. ) 3.. kw ( 30 min. ) 3 0. kw ( cont. ) Torque ( min. ) 00 0 00 000 700 0000rpm 0 00 000 700 0000 rpm Work Range +X D- Radial live tool. 9 3. ZB-axis : 0 s.t +ZB -XB +XB -ZB -Y T00 T00 T300 T00 T00 T00 -X +Y T300 T300 (.) Main pindle -Z +Z ub-spindle : 7 s.t 78 T00 Guide Bush Rear-end working tool holder T00 T00 T300 T00 33 33 33 33 XB-axis : 0 s.t 8...... 0 8 Y-axis : s.t max. 0. T00 T300 T00 X-axis : 7 s.t D-0. 9 3. ZB-axis : 0 s.t (.) +ZB -XB +XB -ZB T00 T00 T300 T00 T00 T00 -Y +X -X +Y Main pindle -Z +Z ub-spindle 3 : 7 s.t 78 T300 T300 T3300 T300 3 3 33 3 Guide Bush T00 T00 T300 T00 33 33 33 XB-axis : 0s.t..... 0. 39 30 30 X-axis : 7 s.t 33 Y-axis : 30 s.t 8. Unit : mm
Advantage D eries W eries W ERIE TL YTEM W series offers more flexabile operations such as turning, milling and cross drilling. From a different combination of power systems, main-spindle, sub-spindle, front-end tool, rear-end tool, C-axis and live tools which means the workpiece can be finished at one time and also allows two operatons to be machined simultaneously. W-0 Tool ystem.d. Tool I.D. Tool Radial Live Tool Rear Live Tool TL PT Tooling ystem W-0 / 3.D. tool Front-end working tool Rear-end working tool Radial live tool* ( Max. ) Axial live tool* ( Max. ) Rear-end Tooling ystem Rear-end working tool* W- * The upper 3 positions are a fixed unit for milling and drilling and the buttom positions allow variations to be fitted. ( For W-0 / W-3 ) The upper positions are a fixed unit for milling and drilling and the buttom positions allow variations to be fitted. ( For W- ) * The buttom positions can be increased up to front-end and rear-end live tools. *3 Live tools are available.
Drawings Dimensions Features pecifications PINDLE CNTRUCTIN pindle can be exchange to be bush type or bushless type which is depend on different work requirements. The bushless design which is suitable for machining cold forge bar and the remain bar can be less than 0 mm to save material cost. The bush type use belt drive from spindle with high speed which can less surface damage and efficient increase working performance. W-3 / W- spindle uses rotary hydraulic cylinder which can firmly clamp the workpiece. The rotary hydraulic cylinder provides fast response and flexible clamping force advantages. Bush type spindle configuration Remaining bar length 8 mm ( 7.8 ) Bushless type spindle configuration Remaining bar length 0 mm (.9 ) Model W-0 Bush type Bushless type W-3 W- ( W-3 series ) : tandard : ption : Not Available pindle utput Torque ( N-m ) W-0 pindle utput utput ( kw ) Torque ( N-m ) W-0 ub-pindle utput utput ( kw ) Torque ( utput Torque W-3 ub-pindle utput utput 0 N-m ) W-3 pindle utput 8. ( kw 8 ) ( N-m ) ( kw ) 3.7 kw ( 30 min. ) 7. kw ( 30 min. ) 3.7 kw ( 30 min. ). kw ( min.) 7 0 8 0 3. kw ( cont. ) 3. kw ( cont. ). kw ( cont. ). 3. kw ( cont. ) Torque ( min. ) 30 Torque ( 30 min. ) 0 Torque ( 30 min. ) 0 Torque ( 30 min. ) 0. 00 8000 3000 00 000 0 00 000 700 0000 rpm 0 000 000 000 8000 0 70 300 0 7000 rpm 0 70 300 0 7000 rpm rpm 00 The ub-spindle is with FANUC built-in motor and C-axis control, which can be simultaneous with main spindle perfectly to maximum machining accuracy. ( W-3 only ) Torque ( N-m ) W- pindle utput 00 80 7. kw ( 30 min ) 0 8. kw ( cont. ) 0 Torque ( 30 min. ) 0 900 0 00 00 300 800 utput ( kw ) 0 8 000 rpm Torque ( N-m ) 0 8 37. 30 0 W- ub-pindle utput. kw ( 30 min. ) 3.7 kw ( cont. ) Torque ( 30 min. ) 900 00 00 300 800 utput ( kw ) 8 000 rpm U-Drill Device ub-spindle applied U-Drill devices which can increase tool number and make tool selection more flexible. ( W-3 only ) Based on different application, the side rotary toolholder can select different live tool attachment, such as for D grooving, polygon machining or standard rotary toolholder. All axes are using high accuracy linear guide way to ensure the most stabilize and provide ultra high performance in moving and positioning. Beside, guide way are pre-load to eliminate any backlash occurs during high speed moving.
Advantage D eries W eries Work Range W-0 -Y +X +Y Radial live tool -XB T00 T00 T300 T00 T00 T00 -X -Z +Z : 07 s.t pindle 39 ZB-axis : 80 s.t +ZB +XB -ZB ub-spindle 3 T00 T00 Guide bush Rear-end working tool holder (8). (3) 37 T00 T00 T300 T00 3. 33 33 33 30. XB-axis : s.t 3 3 3.. 9 83 Y-axis : 8 s.t T00 T300 T300 T300 T3300 T300 T300 3 3 33 3 3. 3 3 38 38. 0 X-axis : 0 s.t +X W-3 -XB -Y +Y T00 T00 T300 T00 T00 T00 -X Radial live tool ZB-axis : 80 +ZB +XB -ZB 3 -Z +Z pindle : 3 s.t 3 T00 T00 3 T00 T00 Guide Bush ZB-axis : 0 7 Rear-end working tool holder ub-spindle T00 T00 T300 T00 9 7 XB-axis : 38 s.t T00 3 3 3 3 3 0 38 T300 38 38 T300 T300 T3300 T300 T300 3 3 33 3 3 X-axis : 0 s.t Y-axis : 37 s.t +X W- -Y +Y Radial live tool -XB T00 T00 T300 T00 T00 -X -Z pindle +Z +ZB +XB -ZB ub-spindle T00 T00 T300 : 0 s.t Rear-end working tool holder ZB-axis : 330 s.t 3 T00 T00 T300 T00 0 0 0 0 XB-axis : 3 s.t T00 T00 33 T300 T300 T3300 T300 30 0 0 0 0 X-axis : 0 s.t Y-axis : 383 s.t Unit : mm
Drawings Dimensions Features pecifications MACHINE LAYUT D- / D-0 7 8,830,3,0 W-0,0 W-3,79 70,30,,9 W-,89,73 3,8 Unit:mm
Advantage D eries W eries TANDARD & PTINAL FEATURE : tandard : ption : Not Available C : Contact Goodway PINDLE Main spindle motor configuration Rigid tapping C-axis pindle brake WRK HLDING pindle hardness collect pindle tungsten collect ub-spindle hardness collect ub-spindle tungsten collect pecial work holding chuck GUIDE BUH tationary guide bush Revolving guide bush Rotary Magic guide bush Tungsten guide bush CLANT Coolant pump High-pressure coolant system. MPA.0 MPA Roll-out coolant tank il skimmer Coolant flow switch Coolant level switch CHIP DIPAL Chip conveyor with auto timer Chip cart with coolant drain il mist collector PWER-DRIVE TL ER milling unit ER 3-spindle front drilling unit ER -spindle front drilling unit ER slotting holder ER -spindle drill / milling holder ( 0 ~ 30 ) ER live tool for back ER0 milling unit ER0 3-spindle front drilling unit ER0 -spindle front drilling unit ER0 slotting holder ER0 -spindle drill / milling holder ( 0 ~ 30 ) ER0 live tool for back Thread whirling unit for outer Polygon machining unit AUTMATIC PERATIN UPPRT Bar feeder Bar feeder interface Parts catcher Work piece transport conveyor Long parts ejector D- D-0 W-0 W-3 W- AFETY Fully enclosed guarding Door interlock ( incl. Mechanical lock ) Impact resistant viewing window Low hydraulic pressure detection switch ver travel ( soft limit ) Load monitoring function Cut off detector THER Tri-color operation status light tower Florescent work light A/C cooling system Electrical cabinet Heat exchanger Complete hydraulic system Complete pneumatic system Advanced auto lubrication system Maintenance tool kit peration & maintenance manuals : tandard : ption : Not Available C : Contact Goodway FANUC CNTRL FUNCTIN PMC n sec/step 8." color LCD Display 0." color LCD Graphic function Full keypad Large - keys 30 K K Part program storage length,0 K i - TD : each path 3i - : total M M 8 M Registerable programs 00 i - TD : each path 3i : total,000 Tool offset pairs 99 i - TD : each path 3i - : total 00 00 ervo control HRV (3) Run hour & parts counter Auto power off function Custom macro B R-3 port Memory card input/output Embedded ethernet ( 0 BAE ) Fast ethernet ( 00 BAE ) pecifications are subject to change without notice. * nly applicable for D- / D-0 series D- D-0 i - TD W-0 *¹ W-3 3i W-
Drawings Dimensions Features pecifications MACHINE PECIFICATIN 9 Model D- D-0 W-0 W-3 W- 0 Max. machining diameter Ø mm Ø 0 mm Ø 0 mm Ø 3 mm Ø mm Working range Max. turning length per chuck Bush Bush / Bushless 7 mm 7 mm 07 mm 0 / 0 mm 3 mm 3 / 80 mm 0 mm ( Bushless ).D. tools Number of tools ize / ( pt. ) mm mm mm mm 0 mm Number of tools I.D. tools leeve size Max. drilling capacity ER Ø 0 mm ER Ø 0 mm ER Ø 0 mm ER 0 Ø 3 mm ER 0 Ø 3 mm Max. tapping capacity M8 x P. M8 x P. M8 x P. M x P.7 M x P.7 Number of tools / 3 ( pt. ) ~0 ~0 ~ Max. speed 8,000 rpm,000 rpm 8,000 rpm,000 rpm,000 rpm ide live tool ervo motor output leeve size 0. kw ER.0 kw ER. kw ER. kw ER 0. kw ER 0 Max. drilling capacity Ø mm Ø 8 mm Ø 8 mm Ø 0 mm Ø 0 mm Max. tapping capacity M x P0.8 M x P.0 M x P.0 M8 x P. M8 x P. Max. end Mill capacity Ø 7 mm Ø 0 mm Ø 0 mm Ø 3 mm Ø 3 mm Max. speed 0,000 rpm 0,000 rpm 0,000 rpm 7,000 rpm,000 rpm Main spindle pindle motor output. / 3.7 kw. / 3.7 kw. / 3.7 kw. / 7. kw. / 7. kw Min. indexing increment 0.088 0.088 0.00 0.00 0.00 Axes rapids 30 m/min 30 m/min 30 m/min 30 m/min 30 m/min NC control FANUC i -TD FANUC i -TD FANUC 3i FANUC 3i FANUC i -TD pindle center height,07 mm,07 mm,00 mm,00 mm,080 mm Coolant tank capacity 0 L 0 L 0 L 70 L 70 L Machine dimenions ( mm ),0 x,3 x,830,38 x,0 x,730,9 x, x,79,880 x,37 x,90 Machine weight,000 Kg,00 Kg,300 Kg 3,00 Kg 3,300 Kg Rear-end Machining Model Max. chucking diameter Rear-end machining Max. length for front ejection capability Max. parts projection length Number of tools Max. speed ervo motor output Back working Drilling capacity ( Dead ) tooling Drilling capacity ( Live ) Tapping capacity ( Dead ) Tapping capacity ( Live ) Max. speed ub-spindle ub-spindle motor output Min. indexing increment pecifications are subject to change without notice. D- D-0 W-0 W-3 Ø mm Ø 0 mm Ø 0 mm Ø 3 mm 80 mm 80 mm 80 mm 30 mm 30 mm 30 mm 30 mm 0 mm 8,000 rpm,000 rpm 0. kw 0.7 kw Ø 8 mm Ø 8 mm Ø 8 mm Ø 3 mm Ø mm Ø mm M P.0 M P.0 M8 P. M0 P. M P0.7 M P0.8 8,000 rpm 8,000 rpm 8,000 rpm 7,000 rpm 0. /. kw. /. kw. /. kw. / 3.7 kw 0.00 0.00 W- Ø mm 0 mm 0 mm,000 rpm 0.7 kw Ø 3 mm Ø mm M0 P. M P0.8,000 rpm 3.7 /. kw 0.00
GDWAY MACHINE CRP. GDWAY (UZHU) MACHINE CRP. Headquarters No.3, Th Road, Taichung Industrial Park, Taichung City, 07, Taiwan, R..C. Website : www.goodwaycnc.com E-mail : goodway@goodwaycnc.com Central Taiwan cience Park Branch No. 38, Keyuan Road, Central Taiwan cience Park.Taichung, Taichung City, 07, Taiwan, R..C. TEL : + 88--3-000 FAX : + 88--3-900 No.89, Chengyang Road, Xiang Cheng Economic Development District uzhou City, Jiangsu, China TEL : + 8--7-399 FAX : + 8--7-799 E-mail : goodway.suzhou@goodwaycnc.com.tw Copyright 0 by Goodway Machine Corp. All right reserved G-D/W ERIE-EN-F-007