RECESSED SURFACE SUSPENSION UP & DOWN Description Fun with magnets and light. Simultaneously graphic and subtle, the Running Magnet is flexible, precise, and as creative as you. It is track lighting redesigned and elegantly refined. Light elements snap in place and connect automatically though the magic of magnets. Extruded aluminum housings create a clean 1-3/8-inch slot and preconfigured corners complete the system that can run up, around and across walls and ceilings. Finishes align perfectly, always, because Running Magnet can be easily cut on site (except Suspension Up&Down). Linear LED and accent fixtures, available in a variety of sizes, can be exchanged and repositioned quickly, without tools, with artistic results. The Running Magnet is perfect for retail displays where frequent changes are typical and absolute performance is mandatory. Lamps Multi Spot: 10W, 4x210lm, K, 80 10W, 4x210m, K, 80 Mini Glo-ball: 7W, 800lm, K, 80 7W, 880lm, K, 80 Mini Glo-Ball S: 3.5W, 400lm, K, 80 3.5W, 440lm, K, 80 Find Me Suspension: 8W, 560lm, K, 8W, 600lm, K, Spot Module: 8W, 600lm, K, 8W, 550lm, K, Light Strip, 11.8 : 7.5W, 460lm, K, 7.5W, 435lm, K, Light Strip 23.6 : 15W, 920lm, K, 15W, 870lm, K, Light Strip 35.4 : 22.5W, 1380lm, K, 22.5W, 1305lm, K, Light Strip 47.2 : 30W, 1840lm, K, 30W, 1740lm, K, Spot 120: 12.5W, 1060lm, K, 12.5W, 985lm, K, Photometrics For current IES files please visit architectural.flosusa.com Construction Extruded aluminum housing with integral DALI controllable track system. Electrical 24V electrical systemlimited to a maximum load of 4A and 100W per driver. Spot and linear luminaires available with individually addressable DALI circuitry, or built-in dimmer on each fixture head. EC to supply site cabling from driver to track location and site UL listed enclosure. Surface Profile Trimless extruded aluminum profile to be surface mounted on ceilings Linear profiles available as feed profiles to connect to a driver and intermediate profiles to fill in remaining lengths. Each feed profile comes with two end caps. Available lengths: 39.4, 59, and 78.7 All linear profiles are field cuttable. Corners available for continuous runs. Track can be powered through corners. Corners are not field cuttable. Notes Consult factory for other ceiling types including accoustic tile ceilings and wood. Listings: UL Listed, IP20 dry location only, Class 2, Meets California standards for commercial interiors. Warranty 2 years from date of sale. 2017 Specifications and dimensions subject to change without notice. Issued 04.12.2018 Page 1 of 7
Luminaries Light Strip Module HE Spot Module Multi Spot Mini Glo-Ball Spot 120 Find Me Suspension Linear Hight Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming switch dims fixture with allen key from 20-100%, DALI and 0-10V. Clear end caps included for continuous look when installing end-to-end. Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V Standard beam spread is 14 Additional interchangeable lenses available in 27 and 36, and 10 x 42 elliptical beam spread Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect with magnets Built-in dimming knob allows fixture to dim from 20-100%, DALI and 0-10V Accent lighting LED module to be installed in The Running Magnet 2.0 System Built-in DC/DC electronic voltage converter. Built-in dimming knob dims fixture from 39-100%, DALI and 0-10V Standard beam spread are 24º and 33º Honeycomb and cross baffle included Profiles The extruded aluminum housing creates a clean 1-3/8 slot that can be run up, around and across walls and ceilings. Vertical and horizontal corners complete the system. The magnetic luminaries are simply installed by insertion. Linear tracks are available in two versions: power feed profiles for connecting to a driver, and intermediate profiles. End caps and connection cables are included with each power feed profile. Internal foam for opening support should not be removed until afte installation. 3.9 [100 mm] 1.6 [41 mm] CEILING LINE How to Specify ex. 06.1614.40. Length 39.4 (1m) 59 (1.5m) Feed Unit Profile 06.1600 06.1601 Intermediate Profile 06.1605 06.1606 Finish 1.4 [35.0 mm] 78.7 (2m) 06.1602 06.1607 Corners Horizontal corners available for turns in the same plane, inside corner to transition from wall to ceiling or from wall to wall and external corners to transition from wall to wall surfaces or around soffits. Corners are prepared to feed a structure in both directions without the need of a feed profile. 5.9 5.9 4.9 [125mm] 5.6 [142mm] [150mm] [150mm] Horizontal Corner 06.1610 Inside Corner 06.1612 5.6 [142mm] 4.9 [125mm] Page 2 of 7
Optional Accessory Extra End Caps 08.8887.14A 08.8887.40A Drivers LED Driver- 96W Optronic 24V Driver, no dimming wire configuration LED96W24V-Non-Dim Dimming Control Unit Box 24V-48V, 1-10V 08.0613.14 Splice Box SP-24V-96W-Non-Dim 13 [347mm] 1.7 [46mm] 2.2 [59mm] Page 3 of 7
Light Strip Module HE Linear High Efficency LED can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Clear end caps included for continuous look when installing end-to-end. SEE TABLE 1.3 [34 mm] Light Strip Lenght Initial DALI Dimming 11.8 (300mm) 460 435 440 435 7.5 105º 03.7001.14. 03.7000.14. 03.7001.14.DD 03.7000.14.DD 03.7001.14.9V 03.7000.14.9V 23.6 (600mm) 920 870 880 833 15 105º 03.7003.14. 03.7002.14. 03.7003.14.DD 03.7002.14.DD 03.7003.14.9V 03.7002.14.9V 35.4 (0mm) 1380 1305 1320 1249 22.5 105º 03.7005.14. 03.7004.14. 03.7005.14.DD 03.7004.14.DD 03.7005.14.9V 03.7004.14.9V 47.2 (1200mm) 1840 1740 1760 1665 30 105º 03.7007.14. 03.7006.14. 03.7007.14.DD 03.7006.14.DD 03.7007.14.9V 03.7006.14.9V Spot Module Accent LED Spot modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically with magnets. Built-in dimming knob dims fixture from 20-100%, DALI and 0-10V. Standard beam spread is 14. Additional interchangeable lenses available in 27 and 36, and 10 x 42 elliptical beam spread. Initial Photometric 600 550 418 404 8 550 14º 14º 03.6302.14A 03.6302.14ADD 03.6302.14A9V 03.6303.14A 03.6303.14ADD 03.6303.14A9V 30 6199 Cd/Klm 30 E(lx/Klm)D (m) h(m) 21 1 2 3 4 5 6199 1550 689 387 248 0.37 0.74 1.11 1.48 1.85 5.16 [129 mm] Optional Accessories º 1.97 [50 mm] 08.8760.00 Flood Lens Accessory 23 ø 1.34 [34 mm] 08.8761.00 Wide Flood Lens Accessory 33 360º 08.8759.00 Elliptical Lens Accessory 6.7 [170.2 mm] 08.8427.14 Extra long snoot for added shielding in aluminum with black finish (does not protude from channel when tucked up into housing) Page 4 of 7
Multi Spot 4 Accent lighting LED module to be installed in The Running Magnet 2.0 System. Built-in DC/DC electronic voltage. Initial 4 X 210 674 4 X 210 630 10 10 11º 11º 03.6306.14. 03.6306.14.DD 03.6306.14.9V 03.6305.14. 03.6305.14.DD 03.6305.14.9V Photometric 30 6199 Cd/Klm 30 E(lx/Klm)D (m) h(m) 21 1 2 3 4 5 6199 1550 689 387 248 0.37 0.74 1.11 1.48 1.85 Optional Accessories 2.7 [69mm] 08.8760.00 Flood Lens Accessory 20 4.8 [121 mm] 1.3 [33 mm] 08.8761.00 Wide Flood Lens Accessory 30 08.8759.00 Elliptical Lens Accessory 4.7 [119 mm] Spot 120 Initial Finish 985 706 12.5 25º 03.6285.14. 03.6285.40. 03.6285.14.DD 03.6285.40.DD 03.6285.14.9V 03.6285.40.9V 1060 731 12.5 25º 03.6284.14. 03.6284.40. 03.6284.14.DD 03.6284.40.DD 03.6284.14.9V 03.6284.40.9V 1.57 [40mm] 5.1 [130 mm] 0.87 [22mm] 985 1060 430 444 12.5 33º 12.5 33º 03.6286.14. 03.6286.40. 03.6287.14. 03.6287.40. 03.6286.14.DD 03.6286.40.DD 03.6287.14.DD 03.6287.40.DD 03.6286.14.9V 03.6286.40.9V 03.6287.14.9V 03.6287.40.9V 7.87 [200mm] ø 1.8 [46 mm] Page 5 of 7
Other Light Module Decorative modules can be rapidly exchanged and repositioned without tools. Light elements are quick to position and connect automatically through the magic of magnets. Built-in dimming knob allows fixture to dim from 20-100%. Mini Glo -Ball 5.11 [130 mm] 3.3 [85 mm] ø 4.3 [110 mm] Initial Initial Built-in Dimming 80 880 880 800 800 7 03.6261.14B 03.6260.14B 03.6261.14.DD 03.6260.14.DD 03.6261.14.DD 03.6260.14.DD Mini Glo - Ball S 5.07 [129 mm] Find Me Suspension 5.11 [130 mm] 118 [ mm] MAX. 118 [ mm] MAX. 8.7 [220 mm] 3.6 [92 mm] ø 4.3 [110 mm] ø 1.3 [33 mm] Initial Mini Glo - Ball S 80 440 271 400 259 3.5 03.6263.14B 03.6262.14B 03.6263.14.DD 03.6262.14.DD 03.6263.14.tbd 03.6262.14.tbd Initial Finish 30 = White 03.6273.30C 03.6273.30CDD 03.6273.30C9V 600 365 8 14º 03.6273.14C 03.6273.14CDD 03.6273.14C9V Find Me Suspension 06 = Chrome 30 = White 03.6273.06C 03.6272.30C 03.6273.06CDD 03.6272.30CDD 03.6273.06C9V 03.6272.30C9V 560 344 8 14º 03.6272.14C 03.6272.14CDD 03.6272.14C9V 06 = Chrome 03.6272.06C 03.6272.06CDD 03.6272.06C9V Page 6 of 7
How to Specify A. Select and position corners C. Drivers 1. Horizontal - Connect sections on flat surfaces (º corner) 2. Inside - Transition from wall to ceiling (inside corner) 3. External - Turn outside corners for walls and soffits (270 corner) B. Fill lengths between corners with Linear Housings 3 or 6 sections can be specified as feed or intermediate profiles. Profile can be easily cut to site to exact length and joined together. Quantity of drivers determined by total wattage or light elements in section (approximately one every 10 feet). Maximum driver distance is 15. Locate drivers nearby. DALI dimming hardwires into profile, bypasses driver. D. Select Spot heads Linear strips are available in five nominal lengths: 1, 2, 3, 4 and 5. Individual units can be adjusted from 20-100% with on board switch, DALI and 0-10V Visit FLOS Worldwide YouTube channel for installation videos Page 7 of 7