APEX SPREADING MACHINE PRICE LIST January 1, 2017 AP 142E Expandable 48 78 $ 1365.00 ¾ solid cloth bar 3 support tubes across machine 3 support tubes across drop off arm Edge control utilizing Thomson bearing movement Special machine widths over 72 $ 105.00 per 6 Double uprights (includes cloth bar ) AP-140 $ 500.00 Wheel riser kit (2,4,6 ) $ 250.00 Cloth weights (set of 2) $ 118.00 **Please note that Rodway catchers are no longer available AP 138 Turntable up to 72 $ 2850.00 1 ¼ frozen cloth bar with cones Additional lifter arm assembly (AP-139) $ 475.00 Special machine sizes over 72 $ 250.00 per 6 Wheel riser kit (2,4,6 ) $ 250.00 Double uprights ( includes cloth bar) $ 475.00 **** Note: Measurements are machine capacity. Table must be 6 wider ****
AP 134 Bulldog up to 72 $ 3050.00 1 ¼ frozen cloth bar with cones Heavy Duty (roll weights to 250 lbs.) Table top shifts with edge control Additional lifter arm assembly $ 440.00 Special machine sizes over 72 $ 250.00 per 6 Wheel riser kit (2,4,6 ) $ 250.00 Double uprights (includes cloth bar) $ 475.00 AP - 150 Roll Goods Unwinder 48 78 $ 1300.00 ¾ cloth bar with cones Special machine sizes over 78 $ 250.00 per 6 ( Includes heavy duty frozen cloth bar and cones) AP 236 Glider up to 72 $ 7650.00 Permanent / Movable catchers with tuck blades 1 ¼ frozen cloth bar and cones Table top shifts with edge control 250 lb. roll weight capacity Ply counter Electronic edge control ( 110 volt or 220 volt) $ 3575.00 Special machine sizes over 72 $ 740.00 per 6 Extra permanent or movable catcher $ 1930.00
Apex track cut-off 4 machine mounted cutter with cord reel and guide track assembly $ 3575.00 Demand feed motorized feed roller system $ 5600.00 AP 500 Super Heavy Duty up to 72 $ 8050.00 Heavy duty construction ( 500 lb. roll capacity) 1 ¼ solid steel cloth bar and cones Permanent / Movable catchers with tuck blades $ 3575.00 Electronic edge control ( 110 volt or 220 volt) $ 3575.00 Special machine sizes over 72 $ 720.00 per 6 Extra permanent or movable catcher $ 1930.00 Apex track cut-off 4 machine mounted cutter with cord reel and guide track assembly $ 3575.00 Demand feed motorized feed roller system $ 5600.00 AP - 180 End of Table Roll Cradle up to 72 $ 3165.00 Live roller cradle Solid tubular steel frame Maximum roll weight 100 lbs. Special machine sizes over 72 $ 435.00 per 6 Casters for movable $ 410.00 AP-800 Pull / Cut System (12 foot system) $21,950 12 long by 78 wide cutting table
Pneumatic operator clamp, pull to length moving frame 72 woven material capacity 90 psi required Auto 4 round knife track cutting machine (110v or 220v 1 phase) Auto-cutting machine movement across track and up/down movement to allow for cut plies to stack in place Variable speed knife travel Manual blade sharpening Please allow 6-8 weeks for delivery CRATING AP 138, AP 134, AP 134 CR, AP 144 $195.00 crating charge AP 236 - $ 300.00 domestic $ 400.00 export AP 500 - $ 400.00 domestic $ 500.00 export AP 180 - $ 280.00 domestic $ 380.00 export AP-800 or special wide sizes of above machines ** Call for estimate ACCESSORIES Cloth Bars: AP4 solid bar ¾ $ 220.00 AP4 1 solid bar 1 $ 280.00 AP4NS - 1 ¼ solid bar 1 ¼ $ 395.00 ** price includes cloth bar and cones Cloth cones: AP3 cloth cone small $ 35.50 each C-4 cloth cone large $ 36.50 each ** bore sizes available ½, ¾, 7/8, 1, 1 1/8, 1 ¼, 1 ½ Cloth weights:
CWT24 cloth weight 24 CWT36 cloth weight 36 CWT48 cloth weight 48 $ 36.50 each $ 50.00 each $ 68.00 each TRACK: AP/100 T track with spacers/screws complete $ 79.00 (5 foot sections) AP/100-55 T track ( 5 foot track only ) $ 58.00 ( 5 foot sections ) AP/100 50 single spacer ( plastic ) $ 7.50 AP/100 51 double spacer ( plastic ) $ 13.00 AP/100 52 2 Phillips head wood screw $ 2.75 AP/100 56 track end stop $ 25.00
APEX DEALER DISCOUNT SCHEDULE There is no discount allowed on applicable crating charges Please provide written confirmation of all machine orders to confirm the machine size to be ordered. Remember that the machine size is the maximum capacity of the width cloth that can be spread through the machine. TABLE SIZES ARE ALWAYS 6 WIDER THAN MACHINE SIZE All machines are custom built to customer specifications. Proper care in sizes is critical to avoid mistakes!!!