Series description: Wilo-Drain TM/TMW/TMR 32 H[m] 10 Wilo-Drain TM /TMR /TMW 32 8 6 TM 32/7 4 TM 32/8 TMW 32/8 2 TMW 32/11 TMR 32/8 TMR 32/11 0 0 2 4 6 8 10 12 Q[m³/h] Design Basement drainage pump, water-cooled Application For pumping clear or slightly muddy water From tanks, sumps or pits For overflows and flooding For draining basement stairways and basement areas TMR The TMR is suited for lowering the water level to a remaining level of 2 mm. TMW The service life of submersible pumps, which are used in pump sumps and through which washing machine water, soapy water from basins and showers, or other mixtures flow, is considerably reduced by settling sediment. Such sediment can form deposits in the pump sump, resulting in the accumulation of mud and odours. Wilo-Drain TMW 32 has a turbulator that prevents the build-up of sediment, expelling it together with the fluid. This reduces costs and the time needed for regular cleaning of the sump. In addition, problems associated with mud removal and the observance of occupational safety hygiene regulations during cleaning of the pump sump are minimized. Type key Example: Wilo-Drain TM 32/7 TM Submersible pump 32 Nominal diameter of discharge port /7 Max. delivery head [m] Example: TM W Wilo-Drain TMW 32/11 HD Submersible pump W = with turbulator R = with flat suction 32 Nominal diameter of discharge port /11 Max. delivery head [m] HD For aggressive fluid Special features/product advantages Constantly clean pump sump due to patented integrated turbulator (TMW) Minimal residual water level of 2 mm (TMR) For aggressive fluids (HD version) With float switch (A version) Incl. hose connection and 10 m cable Technical data Mains connection 1~230 V, 50 Hz Equipment/function Ready-to-plug Thermal motor monitoring Sheath current cooling Connection cable Materials Pump housing PPGF30 Impeller PPE/PS-GF20 Shaft 1.4104 (AISI 430F)/1.4404 (AISI 316L) (for TMW 32/11 HD) Shaft seal: on motor side, carbon/ceramic on pump side Motor housing 1.4301(AISI 304) / 1.4404 (AISI 316L) (with TMW 32/11 HD) Description/design Submersible pump suitable for stationary, fully automatic operation. A pressure hose of appropriate length is connected for mobile use, while a pipe is connected to the pressure port for stationary applications. A residual-current-operated protection switch for a trigger current of 30 ma that is to be provided onsite (regulation concerning outdoor installation) must be utilised in accordance with EN 60335-2,41. The pumps of the TM series are suitable for drainage applications with a multi-channel impeller and a free ball passage of 10 mm according to EN 12050-2 (except TMR). The pump is continuously cooled by the fluid between the outside shroud of the pump and the stainless steel motor housing. The serially installed thermal motor protection assures a permanent protection of the pump. The pump is equipped with a 3 or 10 m connecting cable with shockproof plug and a float switch (not TM 32/8-10M). TMR The Wilo-Drain TMR pumps are built for special applications whereby it is essential to keep the amount of residual water low. The special strainer enables the fluid to be pumped out to a remaining level of 2 mm. TMW Due to its design, the Wilo-Drain TMW ensures constant turbulence in the suction area of the pump. This results in a clean pump sump. No fluid-related odours are generated, due to the turbulence and the elimination of the settling sediment connected with it. The maintenance intervals are extended. Deactivating the Twister (see installation and operating instructions) increases the pump curve by 1 m. Motor Jacket-cooled, stainless steel-encapsulated, dry electric motor with builtin thermal overload protection and automatic reactivation. Cable In accordance with DIN EN 60335-2-41, 10 m of electrical connection line should be used for outdoor operation (however note that regulations vary from country to country). Sealing of pumps/motor compartment Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 1 / 25
Series description: Wilo-Drain TM/TMW/TMR 32 Protection class: IP 68 Submersion depth max. Fluid temperature 3 35 C, max. 90 C for short periods up to in. Cable length 3 to 10 m, depending on type Free ball passage 10 mm (TMR: 2 mm) Pressure port Rp 1 ¼ Mechanical seal on impeller side, one rotary shaft seal on motor side; there is an oil chamber between the seals. Scope of delivery Pump ready for connection with cable, plug and attached float switch (except for TM 32/8), supplied non-return valve (except for TM 32/7), installation and operating instructions. Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 2 / 25
Duty chart: Wilo-Drain TM/TMW/TMR 32 Pump curves H [m] Wilo-Drain TM /TMR /TMW 10 8 6 4 TM 32/8 2 TM 32/7 TMW 32/8 TMW 32/11 TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 3 / 25
Equipment/function: Wilo-Drain TM/TMW/TMR 32 Design Submersible Non-self-priming Open single-channel impeller Vortex impeller Open multi-channel impeller Turbulator Sealing chamber Sealing for mechanical seal on motor side Sealing for rotary shaft seal on motor side Sealing for mechanical seal on fluid side Sealing for rotary shaft seal on fluid side Single-phase AC motor Three-phase motor Direct activation Star-delta activation FC operation Dry motor Motor with oil cooling Sheath current cooling Application Wet well installation, stationary Wet well installation, portable Dry well installation, portable Dry well installation, stationary Equipment/function Explosion protection Hose connection Float switch Non-return valve Capacitor box for 1~230 V Connecting cable detachable Ready-to-plug = available or approved, - = not available or not approved Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 4 / 25
Product list: Wilo-Drain TM/TMW/TMR 32 Pump type Mains connection Float switch Max. volume flow Max. delivery head Length of connecting cable Mains plug Art no. Q max / m 3 /h H max / m TM 32/7 1~230 V, 50 Hz No float switch 7 7 3 Shock-proof 4048412 TM 32/8-10M 1~230 V, 50 Hz No float switch 10 7 10 Shock-proof 4048411 TMR 32/8-10M 1~230 V, 50 Hz No float switch 8 7 10 Shock-proof 4145326 TMR 32/8 1~230 V, 50 Hz No float switch 8 7 3 Shock-proof 4145325 TMR 32/11 1~230 V, 50 Hz No float switch 11 10 3 Shock-proof 4145327 TMW 32/8-10M 1~230 V, 50 Hz No float switch 10 7 10 Shock-proof 4058059 TMW 32/8 1~230 V, 50 Hz No float switch 10 7 3 Shock-proof 4048413 TMW 32/11-10M 1~230 V, 50 Hz No float switch 16 10 10 Shock-proof 4058060 TMW 32/11 1~230 V, 50 Hz No float switch 16 10 3 Shock-proof 4048414 TMW 32/11HD 1~230 V, 50 Hz No float switch 16 10 10 Shock-proof 4048715 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 5 / 25
Data sheet: Wilo-Drain TMW 32/8 Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 7 m Max. volume flow Q max 10 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 10 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/8 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 4.70 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TM/TMW: 296 TMR: 278 min. 280 Nominal current I N 2.10 A Nominal motor power P 2 0.37 kw Power consumption P 1 0.45 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 6 / 25
Data sheet: Wilo-Drain TMW 32/8 Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4048413 EAN number 4016322477426 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 7 / 25
Data sheet: Wilo-Drain TM 32/8-10M Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 7 m Max. volume flow Q max 10 m 3 /h 8 Pressure connection G 1¼ 6 Free ball passage 10 mm 4 TM 32/8 Operating mode (immersed) 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (non-immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Pump curves in accordance with ISO 9906, Appendix A. Q [m³/h] Max. immersion depth Protection class IP 68 Dimension drawing Wilo-Drain TM/TMW/TMR 32/8 1~230 V/50 Hz Fluid temperature T +3... +35 C Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 5.20 kg Motor data Rp 1¼ Mains connection Nominal current I N 2.10 A 1~230 V, 50 Hz TM/TMW: 296 TMR: 278 min. 280 Nominal motor power P 2 0.37 kw Power consumption P 1 0.45 kw Activation type Direct Nominal speed n 2900 rpm Insulation class F Max. switching frequency 50 1/h min. 350x350 165 Cable Length of connecting cable Cable type 10 m H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Motor housing 1.4301 Pump housing Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 8 / 25
Data sheet: Wilo-Drain TM 32/8-10M Information for order placements Make Wilo Art no. 4048411 EAN number 4016322477402 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 9 / 25
Data sheet: Wilo-Drain TMW 32/11 Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 10 m Max. volume flow Q max 16 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 10 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/11 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 6.10 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TMW: 326 TMR: 308 min. 330 Nominal current I N 3.60 A Nominal motor power P 2 0.55 kw Power consumption P 1 0.75 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 10 / 25
Data sheet: Wilo-Drain TMW 32/11 Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4048414 EAN number 4016322477433 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 11 / 25
Data sheet: Wilo-Drain TMW 32/11HD Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 10 m Max. volume flow Q max 16 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 10 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/11 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 6.70 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TMW: 326 TMR: 308 min. 330 Nominal current I N 3.60 A Nominal motor power P 2 0.55 kw Power consumption P 1 0.75 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type 10 m H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 12 / 25
Data sheet: Wilo-Drain TMW 32/11HD Motor housing 1.4404 Pump housing Information for order placements Make Wilo Art no. 4048715 EAN number 4016322499541 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 13 / 25
Data sheet: Wilo-Drain TM 32/7 Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 7 m Max. volume flow Q max 7 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 10 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Protection class IP 68 Fluid temperature T +3... +35 C 1 ~ 230V 50 H Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 3.60 kg Motor data Mains connection 1~230 V, 50 Hz Hmin Nominal current I N 1.40 A Nominal motor power P 2 0.25 kw Power consumption P 1 0.32 kw L Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F B min x B min Max. switching frequency 50 1/h Cable Length of connecting cable Cable type H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 14 / 25
Data sheet: Wilo-Drain TM 32/7 Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4048412 EAN number 4016322477419 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 15 / 25
Data sheet: Wilo-Drain TMW 32/8-10M Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 7 m Max. volume flow Q max 10 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 10 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/8 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 5.20 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TM/TMW: 296 TMR: 278 min. 280 Nominal current I N 2.10 A Nominal motor power P 2 0.37 kw Power consumption P 1 0.45 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type 10 m H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 16 / 25
Data sheet: Wilo-Drain TMW 32/8-10M Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4058059 EAN number 4016322536468 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 17 / 25
Data sheet: Wilo-Drain TMW 32/11-10M Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 10 m Max. volume flow Q max 16 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 10 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/11 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 6.90 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TMW: 326 TMR: 308 min. 330 Nominal current I N 3.60 A Nominal motor power P 2 0.55 kw Power consumption P 1 0.75 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type 10 m H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 18 / 25
Data sheet: Wilo-Drain TMW 32/11-10M Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4058060 EAN number 4016322536475 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 19 / 25
Data sheet: Wilo-Drain TMR 32/8 Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 7 m Max. volume flow Q max 8 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 2 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/8 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 4.90 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TM/TMW: 296 TMR: 278 min. 280 Nominal current I N 2.10 A Nominal motor power P 2 0.37 kw Power consumption P 1 0.45 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 20 / 25
Data sheet: Wilo-Drain TMR 32/8 Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4145325 EAN number 4048482104744 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 21 / 25
Data sheet: Wilo-Drain TMR 32/8-10M Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 7 m Max. volume flow Q max 8 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 2 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/8 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 5.50 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TM/TMW: 296 TMR: 278 min. 280 Nominal current I N 2.10 A Nominal motor power P 2 0.37 kw Power consumption P 1 0.45 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type 10 m H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 22 / 25
Data sheet: Wilo-Drain TMR 32/8-10M Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4145326 EAN number 4048482104751 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 23 / 25
Data sheet: Wilo-Drain TMR 32/11 Pump curves Wilo-Drain TM/TMR/TMW 32-50 Hz - 2900 rpm H [m] Wilo-Drain TM /TMR /TMW 10 Unit Max. delivery head H max 10 m Max. volume flow Q max 11 m 3 /h 8 Pressure connection G 1¼ 6 Maximum operating pressure p max 2 bar 4 TM 32/8 Free ball passage 2 mm 2 TM 32/7 TMW 32/8 TMW 32/11 Operating mode (immersed) TMR 32/11 TMR 32/8 0 0 2 4 6 8 10 12 14 Q [m³/h] Operating mode (non-immersed) Pump curves in accordance with ISO 9906, Appendix A. Max. immersion depth Dimension drawing Wilo-Drain TM/TMW/TMR 32/11 Protection class IP 68 Fluid temperature T +3... +35 C 1~230 V/50 Hz Max. fluid temperature, for short periods up to in T 90 C Weight approx. m 6.20 kg Rp 1¼ Motor data Mains connection 1~230 V, 50 Hz TMW: 326 TMR: 308 min. 330 Nominal current I N 3.60 A Nominal motor power P 2 0.55 kw Power consumption P 1 0.75 kw Activation type Direct Nominal speed n 2900 rpm No. of poles 2 165 Insulation class F min. 350x350 Max. switching frequency 50 1/h Cable Length of connecting cable Cable type H07RN-F Cable cross-section 3G1 mm 2 Type of connecting cable Mains plug Non-detachable Shock-proof Equipment/function Float switch Motor protection WSK Materials Static seal Impeller Sealing on motor side Mechanical seal Carbon/ceramic Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 24 / 25
Data sheet: Wilo-Drain TMR 32/11 Motor housing 1.4301 Pump housing Information for order placements Make Wilo Art no. 4145327 EAN number 4048482104768 Ready for delivery Price group Stock W6 Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-07 25 / 25