risp Ikin Agencies Bathroom ollection www.crispikin.net.au
risp Ikin Agencies Toilets 4,5 Baths 6,7 Showers 8,9 Showers- 12x9 10,11 Showers- Panels / Bath screens 12,13 Showers- omponents 14,15 Vanities 16,17 Storage / Mirrors 18,19 Laundry Tubs 20,21 Laundry Inserts / Glass Shelves 22,23 Accessories 24 Instore Quote Form 25 warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period has a warranty on all products from the date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related questions or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered or repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive cleaning agents containing acids or scouring agents.
pr Project eramic Toilets Specifications Sierra - Suite P Pan 340 660 P Pan- Paradise - Back to wall 385 700 160 185 400 425 390 660 750 P Trap 210 115 W370xD660xH750mm WELS 4 Star / Bottom left or right inlet Solid construction / Soft close seat HSPT Atlantis - Suite S Pan 350 620 620 145 800 W350xD620xH800mm WELS 4 Star / Bottom right inlet Solid construction / Soft close seat 440 425 390 260 790 140 S Trap HASST 220 5 W385xD700xH790mm WELS 4 Star / Bottom inlet only With universal trap / Soft close seat HPT 5 Year warranty on all vitreous china, 1 Year on all valves, washers & fitting kits June 2014 Measurements shown are in millimetres (version 1) -
Back prto wall eramic Toilets Prestige - Back to wall Specifications 375 150 660 420 660 770 850 P Trap 190 S Trap W375xD660xH850mm WELS 4 Star / Back and bottom inlet With universal trap / Soft close seat HPRT Askit - Back to wall 365 130 710 440 385 710 770 850 220 W365xD710xH850mm WELS 4 Star / Back and bottom inlet With universal trap / Soft close seat HAST 10 Year warranty on all vitreous china, 1 Year on all valves, washers & fitting kits June 2014 Measurements shown are in millimetres (version 1) -
Harmony pr Acrylic Baths (Free Standing) Free Standing - Reni Specifications 655 655 785 1720 W1720xD785xH655mm Scratch & mould resistant ABS acrylic One piece (no joins) moulded acrylic HA613 Free Standing - uba 575 725 1610 W1610xD725xH575mm Scratch & mould resistant ABS acrylic One piece (no joins) moulded acrylic HA619 Free Standing - Prestige 590 750 1595 W1595xD750xH590mm Scratch & mould resistant ABS acrylic One piece (no joins) moulded acrylic HA636 Free Standing - ontour 745 590 Ikin risp Ikin Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 agencies W1650xD745xH590mm Scratch & mould resistant ABS acrylic One piece (no joins) moulded acrylic HA670 5 Year warranty on all acrylic baths Measurements shown are in millimetres (version 4) - June 2014
Harmony pr Acrylic Baths Specifications 395MM 425MM 440MM 305MM Project - 1500 Bath W1525xD750xH440mm Scratch & mould resistant ABS Acrylic Lumber & arm support / 20mm upstand HPB1500 750MM 430MM Ikin risp agencies Project - 1675 Bath W1675xD750xH440mm Scratch & mould resistant ABS Acrylic Lumber & arm support / 20mm upstand HPB1675 750MM 430MM Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 305MM 5 Askit - 1800 Bath W1800xD760xH490mm Scratch & mould resistant ABS Acrylic Lumber & arm support / 20mm upstand HAKB1800 1800MM 430MM 5 June - Year 2014 warranty on all acrylic baths Measurements shown are in millimetres (version 3)
pr Project Shower Enclosures (Standard Range) Project - Square Range 6mm safety glass, flat wall, white only 900 900 450 450 180 180 1895 L/H 900 White F/wall HDSA900 R/H HDSAR900 L/H HDSAL900 450 450 R/H 1830mm Door 1830mm 1895mm Overall height with tray 1000 1000 500 500 180 180 1895 Project - Round Range L/H 1000 White F/wall HDSA1000 R/H HDSAR1000 L/H HDSAL1000 500 500 6mm safety glass, flat wall, white only R/H 1830mm Door 1830mm 1895mm Overall height with tray 928 928 1895 450 450 900 White F/wall HDRA900 1830mm Door 1830mm 1895mm Overall height with tray 1010 1010 1895 2 1000 White F/wall HDRA1000 500 500 1830mm Door 1830mm 1895mm Overall height with tray Project June - 2014 Showers Measurements shown are in millimetres (Version 1)
prdesign Shower Enclosures Patented (Doors 1950mm) Fixing System All Design Showers come with a 10year product and parts All Shower glass panels have been protected with replacement warranty special 3M Easy-lean coating All Design Showers are easier to install, with this new patented simple re-locking wall profile Design - Square Range 900 900 6mm safety glass, nano glass, quick fit, 2015 high 1000 1000 450 450 500 500 180 180 180 180 2015 2015 L/H 900 hrome 450 450 R/H L/H 1000 hrome 500 500 R/H F/wall HDSA900 R/H HDSAR900 L/H HDSAL900 Design - urved Rectangular Range Ikin risp agencies Pear Avenue, Derwent Park. Phone - 03 62 727386 Fax - 03 62 727806 10 F/wall HDSA1000 R/H HDSAR1000 L/H HDSAL1000 6mm, nano glass, quick fit, 2015 high 600 L/H 12x9 hrome (RD) F/wall R/H HDRA1200900R L/H HDRA1200900L 10 265 1200 900 265 2015 10 R/H 600 Design - Round Range 820 820 6mm safety glass, nano glass, quick fit, 2015 high 928 928 2015 2015 820 hrome 240 240 BAK 928 hrome 450 450 BAK F/wall HDRA820 10 F/wall HDRA900 10 Atlantis - Round Range 1010 1010 1010 1010 2015 2015 1010 hrome 500 500 1010 hrome 500 500 F/wall HDRA1000 10 F/wall HARA1000 10 Design June - 2014 Showers Measurements shown are in millimetres (Version 3)
870-885mm Product Data Sheet Shower - Design Soft lose 12x9 Sliding Door Minimalistic design with a modern style, this shower is packed with features that will make a statement in any bathroom. Soft close door 6mm toughened glass Solid chrome handle hrome sliding rail Minimalistic design Tray base option 473mm Door Opening 1175-1185mm Patented Fixing System Specifications Recommended Use: Domestic / ommercial / Trade Size W1175 x D870 x H1950mm (H2015mm with tray) 6mm Toughened glass door and return an be installed as a Left Hand or Right Hand Nano glass protection (non-stick), less cleaning required Super quiet stainless steel rollers Frameless 1950mm high panel design Soft closing door 10 Year warranty on shower Shower tray option omplete with wall liner, shower base and highflow waste HDSA1200900R (Right Hand Wall & Left Hand Return) HDSA1200900L (Left Hand Wall & Right Hand Return) Warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period warrants that this product shall be free from defects in material and workmanship for 10 years, beginning from date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related questions or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered or repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive 10 cleaning agents containing acids or scouring agents. Measurements shown are in millimetres (Version 1) June 2014
870-885mm Product Data Sheet Shower - Roma Frameless Roller Door Shower Architecturally designed and with a minimalistic style this shower will make a statement in any bathroom. Patented Fixing System Exposed rail and rollers 8mm toughened glass Solid chrome handle hrome towel rail Frameless design Tray base option 473mm Door Opening 1175-1185mm Specifications Recommended Use: Domestic / ommercial / Trade Size W1175 x D870 x H1950mm (H2015mm with tray) 8mm Toughened glass door and return an be installed as a Left Hand or Right Hand Nano glass protection (non-stick), less cleaning required Heavy duty chrome rollers and rail Frameless 1950mm high panel design hrome towel rail 10 Year warranty on shower Shower tray option omplete with wall liner, shower base and highflow waste HRSA1200900R (Right Hand Wall & Left Hand Return) HRSA1200900L (Left Hand Wall & Right Hand Return) Warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period warrants that this product shall be free from defects in material and workmanship for 10 years, beginning from date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related questions or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered or repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive cleaning agents containing acids or scouring agents. 10 Measurements shown are in millimetres (Version 2) June 2014
Product Data Sheet Shower Walk-in Frameless Glass Panels Minimalistic design, with the flexibility to create you own style and statement in any bathroom. Patented Fixing System 2000mm high panel 10mm toughened glass Adjustable wall profiles hrome support rail Frameless design 2 size options available AR9S-900 AR2S-1200 MAX-1200 Measurements shown are in millimetres Specifications Recommended Use: Domestic / ommercial / Trade Panel Size W1200 x H2000mm (AR2S) Panel Size W900 x H2000mm (AR9S) an be installed as a Left Hand or Right Hand 10mm Toughened glass Adjustable chrome support bracket (1200mm max) Frameless design 2 metre high panel 10 Year warranty 10 Warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period warrants that this product shall be free from defects in material and workmanship for 10 years, beginning from date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related questions or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered or repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. AR9S (900mm) AR2S (1200mm) leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive 10 cleaning agents containing acids or scouring agents. Frameless June V2-2014 Glass Panel Measurements shown are in millimetres
Harmony pr Bath Screens Patented Fixing System All Design Showers come with a 10year product and parts All Shower glass panels have been protected with replacement warranty special 3M Easy-lean coating All Design Showers are easier to install, with this new patented simple re-locking wall profile Specifications 800 1600 Bath Screen - Single 6mm Safety Glass swing panel Fixed either left or right hand side hrome finish, 800x1600mm MP75 10 1000 Bath Screen - Bi-fold 6mm Safety Glass swing panel Fixed either left or right hand side hrome finish, 1000x1600mm MW20 10 1600 Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 Ikin risp agencies 10 Year warranty on all bath screens June 2014 Measurements shown are in millimetres (version 2) -
Harmony pr Shower Doors OMPONENTS Shower Door & Return - Square Project Door WHITE 900x900 X90 Design Door 1200x900 (SQ) WHITE DOOR AN BE INSTALLED EITHER LEFT OR RIGHT 1000x1000 X10 Shower Doors & Return - Round Project Door WHITE 900x900 900x900 LF9F 1000x1000 Shower Door & Return - Rectangular HROME Y2B WHITE LF1F Shower Door & Return - Rectangular Roma Door 1200x900 (SQ) HROME SM92 Shower Door & Return - Atlantis Atlantis Door 1000x1000 DOOR AN BE INSTALLED EITHER LEFT OR RIGHT 6mm safety glass 1830 1950 Design Door HROME X90 900x900 6mm safety glass Design Door 820x820 / 900x900 HROME 820x820 LF8F 900x900 LF9F 6mm safety glass Design Door Ikin risp agencies DOOR AN BE INSTALLED EITHER LEFT OR RIGHT 1000x1000 HROME X10 1830 1950 1000x1000 HROME LF1F 1950 1950 1950 1950 1200x900 (RD) HROME LF92F 8mm safety glass, Large rollers 6mm safety glass Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 HROME AF1F DOOR AN BE INSTALLED EITHER LEFT OR RIGHT Measurements shown are in millimetres (Version 2) June 2014
Harmony pr Shower Parts OMPONENTS Shower Liners 1830 Flat Liner 2 Sided (Equal) 928x928 1010x1010 Shower Trays E90 928FW (908x908mm) L/H R/H 2mm ABS Acrylic Liner 1830/1950mm White acrylic base, complete with Hi Flow Waste 2 Sided Square 2 Sided Rectangle 900x900 1000x1000 Square 1200x900 L/H R/H Shower Trays E92 E91 EF24 1010FW (993x993mm) L/H R/H E10 E12 E11 L/H L/H R/H E57 E58 2 Sided Round 2 Sided Round 820x820 928x928 BAK Shower Wastes Bottom Exit Straight Shower Glues HF Per Tube SSG BAK GLUE 1830 1950 R/H L/H R/H Round 1200x900 EF34 EF33 White acrylic base, complete with Hi Flow Waste Replacement over WHITE HFW HROME HF Ikin risp agencies 1950 Flat Liner 2 Sided (Equal) 820x820 928x928 1010x1010 8202FW (808x808mm 9282FW (908x908mm) 10102FW (993x993mm) EF29 EF30 1010x1010 Hi Flow Waste, 90mm Domed cover lid Side Exit Easy lean EHF Liner and Tray Adhesive Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 2 Sided (Unequal) 900x1200 L/H 1292FW (887x1187mm) R/H Measurements shown are in millimetres (Version 3) - June 2014
Harmony pr Vanity Units (Standard Units) Askit Range Polymarble top, 1 tap holes, solid doors 890 890 890 460 750mm 900mm 1200mm Top style ode 1TH: HAS7501 HAS9001 HAS12001 Prestige Range Polymarble top, 1 tap holes, solid doors, 2 drawers 460 750mm 900mm 1200mm Top style ode 1TH: HPR7501 HPR9001 HPR12001 Paradise Range Polymarble top, 1 & 3 tap holes, 2 drawers 600 460 600mm 750mm 900mm 1200mm Top style ode 1TH: HP6001 ode 3TH: HP6003 ode 1TH: HP7501 ode 3TH: HP7503 ode 1TH: HP9001 ode 3TH: HP9003 ode 1TH: HP12001 ode 3TH: HP12003 Atlantis Range Polymarble top, 1 tap holes, solid doors 750 900 1200 Top style 900 450 1200 890 890 890 540 540 750mm 900mm 1200mm Wall 900mm Wall 1200mm ode 1TH: HA7501 HA9001 HA12001 HAW9001 HAW12001 Deluxe Semi Recess Range eramic top, 1 tap hole, 2 drawers 750 900 1200 850 850 850 355 475 480 750mm 900mm 1200mm Top style 5 HSRD7501 HSRD9001 HSRD12001 5 Year warranty on all vanity tops, 2 Years on cabinets June 2014 Measurements shown are in millimetres (version 6) -
Harmony pr Vanity Units (Other Units) Pacific nr Range Polymarble top, 1 tap holes, solid doors, 2 drawers Top style 400x400mm 600x600mm 900x600mm 600x900mm 900x900mm ode 1TH: HP4004001 HP6006001 HP9006001 HP6009001 HP9009001 Mini Range Polymarble top, 1 tap hole only, solid doors 855 250 500x250mm Top style ode 1TH: M15001 Wall Buddy Range 6 towel holder, 1 counter top, 1 solid door 710 175 175 710 1030 (Pictured) Left Hand 1030 Right Hand Pear Avenue, Derwent Park. Phone - 03 62 727386 Fax - 03 62 727806 Ikin risp agencies HWBL HWB Pedestal Basin eramic, wall mounted, 1 tap hole 560x860x460mm Wall mounted HB1051 June 2014 Measurements shown are in millimetres (version 6) -
Harmony pr Vanity & Storage Specifications Select Range eramic top, 1 tap hole, overflow, 2 drawers 460 750mm 900mm 1200mm Top style HSL7501 HSL9001 HSL12001 400 1800 Ikin risp agencies Tallboy - 1800mm W400xD400xH1800mm Painted white, 4 shelves 1 drawer, 1 door side opening HTB 400 1800 2 Tallboy - Swivel 1800mm W400xD400xH1800mm Painted white, 4 shelves, swivel unit Mirror,1 drawer, 1 door side opening HTBS 2 June - Year 2014 warranty on all units. Vanity & Storage V3 Measurements shown are in millimetres
Harmony pr Bathroom a sheet Mirrors Mirror (5mm Glass) Beveled 10mm edge, consealed brackets 600x900mm 750x900mm 900x900mm 1200x900mm H600M H750M H900M H1200M Mirror (5mm Glass) Sandblasted 50mm edge, consealed brackets 600x900mm 750x900mm 900x900mm 1200x900mm H600FM H750FM H900FM H1200FM Mirror (Grooved) Beveled 8mm edge, grooved, consealed brackets 600x900mm 750x900mm 900x900mm 1200x900mm H600IBM H750IBM H900IBM H1200IBM Mirror (Grooved) Sandblasted edge, grooved, consealed brackets 750x900mm 900x900mm 1200x900mm HD750M HD900M HD1200M Wall abinet Range White Shaving cabinet, mirror doors 600x750mm 750x750mm 900x750mm 1200x750mm H600W H750W H900W H1200W Ikin risp agencies Pear Avenue, Derwent Park. Phone - 03 62 727386 Fax - 03 62 727806 All mirrors are vinyl backed and conform to the Australian Standards June 2014 Measurements shown are in millimetres (version 2) -
875 470 Product Data Sheet Laundry Tub Stainless steel tub & cabinet Smart-looking robust powdercoated galvanised steel cabinet will stand the test of time while complementing any modern laundry appliance 304 grade pressed seamless tub Solid powdercoated steel cab Easily adjustable feet Built in overflow Reversible door Anti-drip lip 630 Measurements shown are in millimetres Specifications Recommended Use: Domestic / ommercial / Trade Size W630 x D470 x H875mm White powdercoated steel cabinet with reversible door Pressed 304 grade stainless steel tub with basket waste Solid construction with adjustable feet Built in overflow and washing machine inlets (reversible) Anti-drip lip around tub with left or right tap option 5 Year warranty on laundry tub View: Side Side Top Warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period warrants that this product shall be free from defects in material and workmanship for 5 years, beginning from date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related question or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered o repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. L630 Models and specifications are current at the time of publication, subject to change without notice. Images are for pictorial purposes and should be used as a guide only. leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive 5 cleaning agents containing acids or scouring agents. Laundry June 2014Tub & ab - Measurements shown are in millimetres (version 4) All prices are excluding GST and subject to change without notic
880 470 Product Data Sheet Laundry Tub Stainless steel tub & timber cab Smart-looking painted cabinet with a high quality pressed seamless stainless steel tub omes fully assembled for easy installation. 304 grade pressed seamless tub Solid painted MDF cabinet Solid chrome handles Built in overflow Double doors Anti-drip lip 630 Measurements shown are in millimetres Specifications Recommended Use: Domestic / ommercial / Trade Size W630 x D470 x H880mm White painted MDF cabinet Pressed 304 grade stainless steel tub Solid construction Solid chrome handles Double doors Built in overflow Anti-drip lip around tub Left or right tap option 5 Year warranty on S/S laundry tub Warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period warrants that this product shall be free from defects in material and workmanship for 5 years, beginning from date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related questions or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered o repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. L627 Models and specifications are current at the time of publication, subject to change without notice. Images are for pictorial purposes and should be used as a guide only. leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive 5 cleaning agents containing acids or scouring agents. Laundry June 2014Tub, MDF ab - Measurements shown are in millimetres (version 1)
470 Product Data Sheet Laundry Tub Stainless steel flush line tub Durable top mounted stainless steel laundry tub, maximise any laundry space with this silk finish modern stylish bench top insert 304 grade pressed seamless tub Flexible install narrow or wide Top mounted clip fixing 5 Year warranty 630 Measurements shown are in millimetres All prices are excluding GST Specifications Recommended Use: Domestic / ommercial / Trade Size W630 x D470 x H240mm Silk finish laundry tub insert Pressed 304 grade stainless steel Solid.8mm stainless steel Left or right hose by-pass kit Top mounted design with fitting clips complete with basket waste 5 Year warranty (Including By-Pass Kit) Warranty Warranty Provider This warranty is provided by risp Ikin Agencies (), 3 Pear Avenue, Derwent Park. Tasmania 7009, Australia (Phone: 61 3 62727386, Fax: 61 3 62727806) Product Warranty Period warrants that this product shall be free from defects in material and workmanship for 5 years, beginning from date of purchase. This warranty is non-transferable and is limited to the original purchaser. How to Obtain Warranty Support Before submitting a warranty claim, we recommend you contact the retailer where you purchased your product for technical support and assistance. Any product related questions or warranty claims that cannot be processed through the point of purchase should be addressed directly to the warranty provider (as detailed above). Warranty onditions To make a claim under this warranty, customers must provide proof of original purchase such as a copy of the sales receipt or dated itemized receipt. An inability to provide proof of purchase or equivalent documentation will void warranty. Our goods come with guarantees that cannot be excluded under the Australian onsumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Defects caused by improper use, accident, neglect, improper installation, failure to observe manufacturers installation instructions, installation by a non-licensed plumber, tampered o repaired (other than on behalf of the warranty provider), not installed to relevant National Standards and State Regulations, improper care, effects of hard water, normal wear and tear, harsh detergents or abrasive cleaners will not be covered by this warranty. Warranty laims If you make a valid claim under this warranty during the warranty period, the warranty provider will replace or repair defective product, or pay for the cost of having defective product repaired or replaced. RH6216 Models and specifications are current at the time of publication, subject to change without notice. Images are for pictorial purposes and should be used as a guide only. leaning Recommendations Surfaces should not be cleaned with abrasive materials eg. Steel wool/scourers, Do not use any corrosive or abrasive 5 cleaning agents containing acids or scouring agents. Laundry June 2014Tub insert - Measurements shown are in millimetres (version 1)
pr Harmony Glass Shelves 800 500 Specifications 3 Tier Glass Shower Shelves Glass Shelves (x3) W180xD180x10mm hrome finish Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 180 500 2 Tier Glass Shower Shelves Glass Shelves (x2) W180xD180x10mm One top fixing point 45 risp Ikin agencies H3TGS 220 45 One top fixing point hrome finish H2TGS 180 250 45 Glass Shelves- Set Large Glass Shelf W250xD250x10mm 2 Small Glass Shelf W200xD200x10mm Wall brackets and screws supplied 200 GSHELVES All dimensions given are approximate and should be checked prior to installation 2 Year warranty on all glass shelving hardware June 2014 Measurements shown are in millimetres (version 1)
Harmony pr Bathroom Fittings AESSORIES Askit Towel Rail Single / Towel Rail Double Single Rail 740mm 6324 Askit Towel Ring / Paper Holder 6340 Askit Robe Hook (Set of 2) 6334 Towel Ring Robe Hook (x2) Askit Bathroom Accessories Set Accessories Set 6350 Double Rail 740mm 6348 6332 Pear Avenue, Derwent Park. 7009 Phone - 03 62 727386 Fax - 03 62 727806 Paper Holder Solid, chrome finish Solid, chrome finish Solid, chrome finish Ikin risp agencies Solid, chrome finish 1x Single Towel Rail 1x Double Towel Rail 1x Towel Ring 1x Toilet Roll Holder 2x Robe Hooks Measurements shown are in millimetres (Version 1) - June 2014
instore quote sheet ustomer Date Quote Ref Property Address Email Store Phone Store Representative Products SKU Price $ eramic basin/s Bath Toilet Shower/s Accessories Waste Panels/Bathscreens Vanity units Tapware Mixer/s Mirrors Storage Laundry Total $ Notes: Quote subject to stores terms and conditions 1 5
Please note: Detailed specifications and installation details can be found on our website www.crispikin.net.au risp Ikin Agencies DISTRIBUTED BY RISP IKIN AGENIES T 03 6272 7386 F 03 6272 7806 sales@crispikin.net.au www.crispikin.net.au