Lamp Twilight Lamp twilight intermittent light. Supplied without batteries. To use insert 2 batteries ns / cod. 446 00 08021-4038/1. Equipped with fixing system. 4460008022 4038/2 - Yellow 446000500 4302 - Orange Red lamp for construction site Lamp construction site red light fixed. Supplied without batteries. To use insert 2 batteries ns / cod. 446 00 08021-4038/1. Equipped with fixing system. 4460008023 4038/3 Red Portable lamp LED 6V Supplied without batteries. It can work with a stack our cod. 08021-446 00 4038/1 or 4 batteries torch our cod. 512 00 01000-350. 446000505 4303 1213
Flexible Lamp Portable lamp for inspections in hard to reach places (inside the dashboard, engine room, etc..). Thanks to the flexible probe 25 cm long can brighten areas that can not be reached. The krypton bulb illumination with an effective and focused on the point concerned. Equipped with hood transparent scratch-resistant and insulating causing no damage and short circuit. Easy to carry thanks to the practical attack. Powered by two 1.5V batteries not included. Batteries inserted art. 5120001020-360-LR6. 5120000310 310 5120000315 315 - Replacement Lamp Kit Lights and mirrors Kits with lights and mirrors inspection in practical case. Product suitable for workshops cars, motorcycles and industrial vehicles, dealerships, body shops, electrician for cars, installers hi fi, campers, airports, marine workshops, hauliers and earthmoving in general. The kit is composed of a series of tools for the inspection in the hidden points, for the verification of damage or problems. The trousse comprises a handle on which to mount various extensions, to support a mirror to hidden points, a magnet for recovery small parts, a lamp with high efficiency LED for illumination, a LED to ultraviolet light can highlight products tracers reveals leaks. The particular shape of the tool allows maximum access to even the most inaccessible. The kit includes: (A) 1 folding mirror (L. 7 cm - width. 4.5 cm), (B) 1 flexible shaft (L. 23 cm), (C) 1 handle with power button (L. 18 cm), (D) 1 white bulb, (E) 1 UV bulb, (F) 1 magnet (length. 7 cm), (G) 1 extension curve (L. 20 cm), (H) 1 extension Straight (L. 20 cm). The tools are contained in a practical case with thermoformed in order to keep the tools. The lights can be powered by 3 AA batteries (type ns. 512 00 00120) is not included in the kit. 4770004770 336 - KIT LIGHTS AND MIRRORS 4770004771 336 / R WHITE LAMP REPLACEMENT 4770004772 336 / RU UV LAMP REPLACEMENT 1214
Magnifier articulated with LED lighting Powerful magnifying glass mounted on a magnetic base with articulated arm, equipped with lighting with 14 LEDs, handy to zoom small details even in low light conditions. Very useful in all types of work: mechanical, electronic, electrical, maintenance, etc. Magnification up to 3X, dual power options with two AAA 1.5 Volt batteries or with transformer 220 V - 4.5 V supplied as standard. Constructed of optical glass, lens support and grip in shockproof plastic material weighted with the magnet and metal base to ensure maximum stability. Arm articulated in plasticized 25 cm long steel. Lens can be rotated by 150 on the support arm. Lens diameter 5 mm, total length 500 mm, weight 540 grams with batteries. Standard equipment: for mains power supply 220 V - 50 Hx with cable length of 10 cm, table metal support with screw terminal. 5120001220 506 Spare Parts Article Power pack 220 V 4,5 V 5120001230 507 LED pocket flash light Anodized aluminum torch. High efficiency LED. Adjustable focus. 5120000010 10-IM33 1215
Torch Torch rubber oil resistant. Button protected. Krypton lamp. Safety strap. 5120000060 60-IRUB2 Winder with portable lamp without transformer Automatic cord complete with portable lamp, with recovery spring, suitable for application on the wall. Ideal for use in all workshops, self-repair, bodywork, motorcycle workshop, carpentry, etc. Cable reel with fluorescent bulb 11W white light. Type H05RN-F, cable length 15.5 meters (14 meters wrapped, 1.5 meters external), cable section 2x1 sq mm; length power cord 1 meter. Structure impact resistant plastic. Stop device cable rack, inserted every 50 cm. Fixing bracket wall made of sheet steel which allows the rotation of the cable reel. Supply voltage: 230V or 24V. Degree of protection IP 42 cable reel. Degree of protection IP 55 lamp. Built in accordance with IEC 1242, EN 6058-1, EN 6058-2-8, EN 61242, EN 60335-1, 626. Products meeting the requirements of the 2006/5 / EC, 2006/42 / EC, 2002/5 / EC. CE mark. NB: 24V models must be fed only at 24V; the use with different voltages irreparably damage the power supply circuit of the lamp. 3480100210 08-230V winder with fluorescent lamp 3480100220 0-24V winder with fluorescent lamp Spare Parts Article Ring nut parts 3480002575 432/G 1216
Winder with portable lamp with transformer 24V 3480200410 10-230V reel with fluorescent lamp and transformer Automatic cord complete with portable lamp and transformer, with recovery spring, suitable for application on the wall. Ideal for use in all workshops, self-repair, bodywork, motorcycle workshop, carpentry, etc. Cable reel with fluorescent bulb 11W white light. Type H05RN-F, cable length 15.5 meters (14 meters wrapped, 1.5 meters external), cable section 2x1 sq mm. Power cord length 1 meter. Safety transformer: 25 VA power, supply voltage 230 V, output voltage 24 V circuit breakers with manual reset, places on the secondary, for the protection circuits and overloads. The primary and secondary winding are separated. Structure impact resistant plastic. Stop device cable rack, inserted every 50 cm. Fixing bracket wall made of sheet steel which allows the rotation of the cable reel. Degree of protection IP 42 cable reel. Degree of protection IP 55 lamp. Built in accordance with IEC 1242, EN 6058-1, EN 6058-2-8, EN 61242, EN 60335-1, 626. Products meeting the requirements of the 2006/5 / EC, 2006/42 / EC, 2002/5 / EC. CE mark. Spare Parts Article Ring nut parts 3480002575 432/G Winder with lamp Led Strip 12-24 Volts Wall electric winder with lamp lighting "Led Strip" with very high light output and with white color. Ideal for use in all workshops. The use of the LED system allows unmatched brightness, a clear color of the light and easy on the eyes, a very high energy savings and an unmatched life expectancy than traditional lamps. It equipped with a total cable length of 15.5 meters, length of 1 meter of cable for power supply, adjustable wall bracket. Degree of protection IP64 lamp, IP42 degree of winder protection. Lamp with protected switch, rotated and swiveled hook disappearance, nonslip grip. Winder dimensions: 30 x 310 x 165 mm. Weight 4.5 kg. WARNING: the item must be powered with low voltage 12 or 24 Volts. No internal transformer. Regulations: Rhos EN 6058-1 EN 6058-2-8 EN 60335-1 2006/5 CE 2004-108-CE 2011-65-UE 3480100230 10 Tecnical Features Winder measures 30 x 310 x 165 mm Weight 4,5 Kg Degree of protection to the lamp shock IK 0 Light flow 360 lm Type electric cable H05 RN-F 2 x 1 mmq Degree of protection of the lamp IP64 Degree of protection of the winder IP42 Power supply cable length (m) 1 m Supply voltage 12 24 V dc/ac Lamp cable length 15,5 m 1217
Winder with transformer and lamp Strip Led Workshop lamps and electric winders Wall electric winder with 24 Volts low voltage transformer and lighting lamp "Led Strip" with very high light output and with white color. Power supply via mains voltage 220 V 50 Hz. Ideal for use in all workshops. The use of the LED system allows unrivaled brightness, a color of the light and relaxing light for the eyes, a very high energy savings and an unmatched life expectancy than traditional lamps. It equipped with a cable length of 15.5 meters, length of 1 meter of cable for power supply, adjustable wall bracket. IP64 degree of protection lamp, IP42 degree of winder protection. Lamp with protected switch, rotated and swiveled hook disappearance, nonslip grip. Winder dimensions: 30 x 310 x 165 mm. Weight 4.5 kg. Regulations: Rhos EN 6058-1 EN 6058-2-8 EN 60335-1 2006/5 CE 2004-108-CE 2011-65-UE 3480100240 24 Tecnical Features Weight 5,5 Kg Winder measures 30 x 310 x 165 mm Light flow 360 lm Degree of protection to the lamp shock IK 0 Degree of protection of the winder IP42 Supply voltage 220 V 50 Hz Lamp cable length 15,5 m Degree of protection of the lamp IP64 Type electric cable H05 RN-F 2 x 1 mmq Power supply cable length (m) 1 m Holder with and without cable IP20 Lamp holder with switch admitted by Presidential Decree 547 "for use in dry places and not in contact with large metal masses." Grip anatomically shaped plastic anti-oil, anti-acid, anti-solvent. Wire cage steel hinge and reflector in galvanized steel. Lamp cap screw E27, maximum power 60W. Version with cable length of 10 meters, section 2x0.75 mm2, IMQ approved. IP20 protection. Model 3480000100 305 T WIRELESS 3480000200 306 T CABLE 10 mt IMQ 1218
Electric cable winder 1.8 Kw Max 3x1.5 sq mm Winder electric power lamps and power tools. New housing impact resistant plastic black. Built in accordance with IEC 1242, CE, responding to the security law 626, complete with thermal circuit breaker, protection degree IP42. Total cable length: 14 mt wrapped + 1 mt exterior, section 3x1.5 sq mm. Operating Temperature: -5 C to + 40 C. Max power cord wrapped 1200W, 1800W extended cable. Cable W avvolto W steso 3480101000 1325 - WINDER CABLE 3x1.5 3x1,5 1200 1800 Enrouleur manuel pour câble électrique. Enrouleurs manuels de cable électrique. Cable marque vde et aux normes. Dotes de disjoncteurs thermiques, frein de blocage. Modele 220V dote de 4 schuko + france. Cable n. X mmq Lung. mt V Volts 3480100810 1230 3X1.5 25 220 121
Manual electric cable winders Winders manuals of electrical cable constructed in accordance with IEC 1242, CE marked IMQ-branded cable and plugs taken under. Equipped with thermal circuit breaker, locking brake, steel support stand and external flanges in galvanized sheet. Models 220 V. Equipped with 2 outlets G 10/16 at 2P + T, 1 CEE socket 16 at 2P + T, 1 CEE plug 16 at 2P + T. 380 V models with 2 CEE sockets 16 3P + T, 1 CEE plug 16A 3P + T. Spare parts for fluorescent lamp 308 Cable n. X mmq Length mt W avvolto W steso V Volts 3480100600 1226 3X1.5 40 1200 1700 220 3480100700 1227 3X2.5 40 1800 2800 220 3480100800 1228 4X2.5 30 2500 4500 380 Spare parts for fluorescent lamps our codes: 348 00 01 300, 348 00 01 310, 348 00 and 348 00 01400 01410 no more provided. Article 3480001500 308/R Tubo fluorescente di ricambio 220/24 Volts 3480001600 508 Campana trasparente di ricambio 3480001415 308/24V Circuito elettronico interno di ricambio 24 Volts Fluorescent lamp workshop Workshop lamp with fluorescent tube, very bright white light and last up to eight times longer than ordinary light bulbs. Less energy consumption, absence of heating. Ideal for use in all the workshops of self-repair, body shops, motorcycle workshop, carpentry, machine shops, etc.. Provided with power at 220 volts and 24 volts at low voltage. Rubber covered handle oil-resistant and non-slip, switch protected from dust and moisture, removable hook to hang the lamp, internal protection fuse easily accessible, protection against dust and moisture IP55. Available with and without cable 10 meter neoprene very flexible, section 2x1 mm2. Supply Cable 3480002360 330/C 220Volts Neoprene 10 meters 3480002370 330/S 220 Volts No 3480002380 331/C 24 Volts Neoprene 10 meters 348000230 331/S 24 Volts No Spare Parts Article Fluorescent tube replacement 220/24 Volts 3480001500 308/R Transparent hood parts 3480002400 332/C Internal electronic circuit parts 24 Volts 3480002410 332/E Hook parts 3480002361 - Glass fuse for 220V 3580000200 2A-L20 Glass fuse for 24V 3530000060 500MA-L20 1220
Portable lamp fluorescent mod.2 Portable lamp with fluorescent bulb 11W white light. Ideal for use in all workshops, self-repair, bodywork, motorcycle workshop, carpentry, etc. Beam of light up to eight times longer than ordinary light bulbs. Less energy consumption, absence of heating. Available with 230V and 24V. Electronic power circuit in the handle, protection switch. Hook hidden adjustable. Component handles high strength: the rigid part in PP and glass fiber, soft part Santoprene TPE-V. Degree of protection IP 55, when supplied with a cable. Available with or without cable (type H05RN-F) to 10 meters, 2x1 sq mm, highly flexible neoprene material. Built in accordance with EN 6058-1, EN 6058-2-8, EN 60335-1. Complies with the requirements of the 2006/5 / EC, 2002/5 / EC. NB: 24V models must be fed only at 24V; the use with different voltages irreparably damage the power supply circuit of the lamp. Supply Cable 3480002550 430/230C 230 V 10 meters 3480002555 430/230 230 V no 3480002560 431/24C 24 V 10 meters 3480002565 431/24 24 V no Spare Parts Article Fluorescent tube replacement 230v / 24V 3480001500 308/R Electronic circuit 230V 3480002556 430/CE Electronic circuit 24V 3480002566 431/CE Transparent hood parts 3480002570 432/CT Hook parts 3480002361 - Green bezel parts 3480002575 432/G 1221
Workshop lamps Led by a new system Stip exceptional light output. The system Strip Led has a light output of 150 traditional LEDs. Light beam with an angle of 120. Reduced power consumption, only 3.5 W and the absence of heating. Ergonomic handle, switch protected, oil-resistant casing. For workshops, laboratories, construction sites. Used as holders for electric reels Technical features: Dimensions: L 25 mm H 57 mm. Angle of light output ( ) 120. Color Temperature (K) 6500. Power consumption (W) 3.5. Luminous Flux (lm) 360. IP64. Power button function anti-rebound. Bright and shining light, no heat generation, and with minimal power consumption. Available with 230V or 12V DC / AC - 24V DC / AC. Cable H05 RN-F. 2x1 mm². Switch protected. Supply Cable 3480002600 530-230/10c 230v Neoprene 10 mt 3480002610 530-230s 230v No 3480002620 530-24/10c 12v cc/ca - 24v cc/ca Neoprene 10 mt 3480002630 530-24s 24v cc/ca - 12v cc/ca No Spare Parts Article Transparent cover 3480002640 530/1 black / transparent cover Hook parts 3480002365 Hook + support 1222
Rechargeable Lamp 6 SMD LED Lamp equipped with 6 powerful LEDs capable of delivering 220lm and 1 front LED Folding handle at 180 for easy maneuverability With magnetic base and retractable hook Equipped with indicator x the battery charge status The lamp is equipped with 2 magazines: mains 220V and 12V car 348000260 535-Rechargeable Lamp 6 SMD LED Tecnical Features Recharge time 3,5 h Autonomy 3 h Indicator of the battery charge status Yes Light flow 220 lm Front luminance 660 lux a 50 cm Angle of light output 0 Magnet on the basis Charger Mains Charger + cigarette lighter plug Spare Parts 3480002710 Power supply 110 / 240V - USB + cable 3480002720 Power supply 12V - USB + cable Articulated LED lamp Compact Slim Led lamp with the rotating body by 180 With magnetic base and retractable hook With indicator x the battery charge status The small size and the folding body makes the lamp a useful tool for lighting in tight spaces. Equipped with 2 magazines: from 220V and 12V car 3480002680 534-rechargeable lamp articulated Tecnical Features Light flow 340 lm Front luminance 520 lux a 50cm Indicator of the battery charge status Yes Autonomy 3 h Recharge time 3,5 h Charger Mains Charger + cigarette lighter plug Magnet On the basis Spare Parts 3480002710 Power supply 110 / 240V - USB + cable 3480002720 Power supply 12V - USB + cable 1223
Portable Rechargeable Lamp 4 SMD LED Lamp is equipped with 4 powerful LEDs capable of delivering 220lm Folding at 180 degrees for easy maneuverability Magnetic base and retractable hook Equipped with indicator x the battery charge status Equipped with 2 magazines: from 220V and 12V car 3480002700 536-Rechargeable lamp 4 SMD LEDs Tecnical Features Autonomy 4 h Indicator of the battery charge status Yes Light flow 220 lm Front luminance 450 lux a 50 cm Magnet on the basis Recharge time 3 h Charger Mains Charger + cigarette lighter plug Spare Parts 3480002710 Power supply 110 / 240V - USB + cable 3480002720 Power supply 12V - USB + cable Workshop lamps LED Flashlight Penlight. Torch LED pocket. Practical light source with powerful LED long life. Pointer led end. Inspection light to all repairers, installers etc.. 3480003000 Led Penligth Tecnical Features Spare batteries 5120001030 Autonomy 8 ore Tipo di batterie tipo AAA ( ministilo )N 3 incluse Durata led 10.000 ore Emissione luminosa 0lm Puntatore a led 20 lumen 1224
Work lamp rechargeable Led RCH 10 professional PHILIPS Lighting cordless tool. Compact instrument for workshops ideal for fast and long repairs. Illumination intensity 150 LM white light at 6500 K. Beam of light at 70 with 6 LED-life LED 10,000 h It can resist shocks, protection IK07. Degree of protection IP54 water and dust-resistant to oils, greases, solvents. With retractable hook in the upper part swiveling 360 and the magnet on the base. Autonomy 5h- charging time 4h lithium-ion battery without memory effect with 1500 mah capacity. Weight 180 g-size length 18 mm-38 mm-63 mm depth. 3480003080 RCH 10 Work lamp 72W Work lamp 72W, with shell and rubber bumper. Equipped with 2 schuko sockets on the back can be used as extension cables (max 1,500 watts). Ideal for all workplaces in the dark or low light. Excellent lighting in workshops, for work carried out outside and in the pipeline. Suitable for carpenters, fabricators, maintenance personnel, electricians, thermohydraulic, body shops, mechanics, drivers. Compared to a halogen lamp does not heat, and has low energy consumption. IP54 protection. The lamp is protected against dust and splashing water. It can be hung, and used with the stand 348 00 02250 to fit on any type of terrain. It may replace the fluorescent tube with burned parts cod. 348 00 02585. Equipment: 2 fluorescent tubes of 36W (72W total power); 2 integrated sockets schuko 230V / 16A on the back; 5 m cable type HO7RN-F 3G 1.5 mm neoprene Extra flexible, with excellent resistance to oils and fats, and mechanical stress, with schuko plug. Article 3480002580 442 Work lamp 3480002585 442R Fluorescent tube replacement 36W Tecnical Features Cable length 5 m Weight 5 Kg Dimensions H285 X L45 X P110 Protection rating IP 54 Tensione 230V 50Hz 1225
Replacement lamp cod. 3480002200 Article 3480002210 325R Neon tube replacement Stand for work lamp 72W Trestle with 3 legs, galvanized steel work lamp 72W cod. 348 00 02580. Stable and safe on all surfaces, with height adjustment and swivel. Easy to transport, and space saving when closed. 3480002250 325C Tecnical Features Weight 5,42 Kg Maximum height 210 cm Minimum height 0 cm C+R under bonnet strip light Professional Scangrip under bonnet LED strip light to illuminate the complete under bonnet engine area. With adjustable telescopic support and padded hooks to protect the vehicle s paintwork. It operates by cable or battery. Without cable and unhooked from the support, it becomes a large inspection lamp. Technical features; 48 SMD LED 500/1000 Lumen 1000/2000 Lux 3 hours/1.5 hours autonomy. 6000 Kelvin Supplied with a lithium-ion battery 3.7V/5200mAh Recharge time: 4 hours 5 metre cable Protection rating: IP65 Dimension: Length 1,027 mm x diameter 25 mm Weight: 0.4 kg. 3480003120 540 1226
Line Light C+R lamp Powerful Scangrip LED inspection lamp that also operates as a torch. Ultraslim, the 25 mm diameter permits inspections in the most inaccessible places. Upper spotlight It operates by cable or battery. Magnetic hook supplied to assist the positioning. Technical features 24 X SMD LED/ 1 X CREE XP G2 1300/1500 Lux 600/150 Lumen 2.5 hours/8 hours autonomy. 6000 Kelvin Recharge time: 4 hours Lithium-ion battery 3.7V/5200mAh 5 metre cable Protection rating: IP65 Robust and impermeable Dimension: 357 mm x diameter 25 mm Weight: 0.27 kg. 3480003130 541 Vega 1500 C+R lamp Scangrip professional, powerful LED worklamp Emits a powerful diffused light without dazzle. Robust, light, impact-resistant structure. As opposed to halogen work lamps, it does not create any fire risk inasmuch that LEDs do not produce heat. It operates by cable or battery. Ideal in all work environments. The support is manufactured in epoxy resin painted steel. It can be mounted onto the Scangrip tripod, code number 348000310. Technical features 83 LED Step1-Step2 750/1500 Lumen 1700/3000 lux at 0,5m 3 hours/1.5 hours autonomy. 6000 Kelvin Protection rating: IP54 Recharge time: 1.5 hours 5 metre cable Supplied with a lithium-ion battery 11.1V/2600mAh Dimensions: 288x103x280 mm Weight: 1.6 kg. 3480003140 542 1227
Zone forehead lamp Scangrip professional, rechargeable LED forehead lamp. Designed for the optimum illumination of the work area. Robust and light, it leaves the hands free and permits good visibility of the work area. Technical features COB LED Step1-step2 110/220 lux at 0,5m 60/120 Lumen 5 hours/2.5 hours autonomy. Lithium-ion battery 3.7V/800mAh 6000Kelvin Recharge time: 3 hours Protection rating: IP30 5 hours/2.5 hours autonomy. Dimensions: 100x30x35 mm Weight: 0.084 kg 3480003150 543 Forehead lamp Scangrip professional, rechargeable LED forehead lamp with touchless sensor Ideal in all sectors; it illuminates the work area and leaves the hands free to work. If set in sensor mode, the lamp can be switched OFF/switched ON by passing the hand in front of the lamp. Resistant to dust and weighs only 120 grams. Technical features: COB LED 2W Step1-step2 300/500 lux at 0,5m 100/200 Lumen 6 hours/3 hours autonomy. 1600 mah lithium-ion polymer battery 6000 Kelvin Recharge time: 4 hours Protection rating: IP65 Dimensions: 101x4x35 mm 3480003160 544 1228
Sunmatch 2 lamp Scangrip professional LED lamp for comparing colours and the search for small imperfections Utilisation sector: Industry and all bodyshops and painting stations Possibility of choosing between two intensities of light and two different colour temperatures, Keeping the switch pressed for more than 10 seconds, the light changes from warm light to cold light and vice versa. After three consecutive minutes of use, an intelligent system reduces the power. The COOL WHITE (6500K,500 lumen) option is ideal for dark coloured surfaces The WARM WHITE (4500K, 250 lumen) option is especially useful for bright surfaces Technical features COB LED 4500/6500 KELVIN 1100/550 lux at 0,5m (step1/step2) IP67 protection rating: resistant to water and dust with glass lens resistant to solvents. 1 hours/2 hours autonomy Recharge time: 4 hours Supplied with a lithium-ion battery 3.7V/2600mAh Dimensions: 60x10x40 mm Weight: 0.30 kg. 3480003170 545 Multimatch lamp 2 Scangrip LED light to check colours. Ideal for the inspection of large surfaces whilst polishing and painting. Light output: 2,500 lumens. Utilisation sector: Industry and all bodyshops and painting stations It operates by cable or battery. Possibility of choosing between two intensities of light and two different colour temperatures, The intuitive display signals the battery capacity and the remaining power autonomy. Technical features IP67 protection rating: resistant to water and dust. 1 hours/14 hours autonomy Recharge time: 2 hours 5 metre cable Lithium-ion battery 11.1V/4400mAh Integrated handle and flexible support to position the lamp to the required illumination angle. Dimensions: 235 x 88 x 233 mm Weight: 2.2 kgs. The support is predisposed for mounting directly on the tripod with wheels: our code. 3480003200 and on tripod code 348000310. 3480003180 546 122
Tripod Stable and useful accessory for Scangrip worklamps Extendable from 1.35 metres to 3 metres thereby permitting the height adjustment required. The metal construction makes it stable even when completely extended. The electric cable can be fixed to the clip positioned on each leg. Thermoplastic fixing ring with an M10 steel pin. Maximum load: 10 kgs. Base diameter: 1.20 metres Weight: 6 kgs. 348000310 547 Tripod on wheels Accessory for the mobile positioning of the Scangrip worklamp. Permits adjusting the position of the light towards the work area. Extendable from 0.7 metre to 1. metres. Thermoplastic fixing ring with an M10 steel pin. Two of the three wheels can be blocked in position. Maximum load: 10 kgs. Base diameter: 0.8 metres Weight: 6 kgs. 3480003200 548 1230