ACCESSORIES adapters SERIES Ø p. SERIES Ø p. SERIES Ø p. s Series Ø p. Series Ø - Ocean - Plug&Play Ocean Easy p. 9 Series Ø - Wave RX - Wave Wire - Senso RX - Senso Wire - Garda p. Series Ø - Roll - Micro p. Series Ø - Tronic RX - Clima RX - Plug&Play p. Series Ø - SYSTEM OPTime p. 6 Series Ø p. other accessories ACCESSORIES FOR MANUAL OPERATION p. LOCKERS COMPONENTS p. 9 "Zama, brass, aluminium and plastic are the main materials used to build all our designs. Research, development, passion and insight are the working methods behind our "Italian touch"." Michele Cavati Electronic design office
ADAPTERS - Series Ø ADAPTERS - Series Ø 0 0 Ogive 6 Ogive Ogive Octagonal Octagonal 0, 0,6 0, A0_00 Adapters Octagonal 0 (External tube notch) Octagonal 0, 0,6 0, A0_00 Adapters Octagonal 0 (Internal tube notch) Ø6 0, Ø Ø 0, A0_0 Adapters RollerBat 6 A0_0 Adapters Oval Selt A0_09 Adapters tube reduced Ogive Ogive Ogive Round Round 0 Round 0 Ø0 A0_00 Adapter Round 0 th. mm Ø Ø0, Round 0 Round Ø0 A0_006 Adapters 0 mm round th. mm Ø Round 0 Ø, Ø 0 A0_0 Adapters 0 mm round th., mm with tooth Ogives Ø 0,- Ø A0_00 Adapters Oval Selt and RollerBat Ogive 0 Ogive Ø, A0_0 Adapters Ogive + Flat Ogive Ø A0_0 Adapters Round 0 th.. mm A0_0 Adapters Round Filtersun Ø0 Ø ZF Ø A0_00 Adapters ZF, 0, Delfin / Acmeda Ø A0_00 Adapters Delfin and Acmeda A0_0 Adapters RollerBat 0 A0_0 Adapters Ogive Round 0 Round -- Ø Ø Ø Ø Others Oval X6 6 A0_00 Adapters Oval x6 Benthin Ø A0_009 Adapters Benthin Round Ø0, A0_0 Adapter round tube 0 Thoni A0_0 Adapter Delfin -- Round 0 Round Round Ø9 Ø Mottura 9 A0_0 Adapters round Mottura 9 A0_0 ZIP Adapter A0_00 Ring adapter mm - mm. Allows to use all adapters of series. N.B. All adapters of the series fit on the output. Ø0, A0_00 Adapter Round 0 Ø, A0_006 Adapters Round Ø, A0_0 Adapters Round ADAPTERS - SERIES Ø ADAPTERS - SERIES Ø CHERUBINI AG0 AG0 CHERUBINI
ADAPTERS - Series Ø ADAPTERS - Series Ø Octagonal Octagonal Octagonal Octagonal 0, A0_0 Adapters Octagonal 0 0,0 0,0 0,0 A0_0 Adapters Octagonal th. mm Octagonal Star-shaped -, A0_0 Adapters Octagonal th. 0,6 mm Ogives Ogive Ogive flat Ogive Ogive 0 Ø A0_00 Adapters Ogive, Ø Ø, A0_0 Adapters Flat Ogive Ø6 A0_00 Adapters Ogive, Ø, Ø0 A0_06 Adapters Ogive 0 Stobag 0, Round 6 Round Round A0_00 Adapters Octagonal A0_0 Adapters Star-shaped,, Deprat Deprat /Welser 6 Deprat 9 Ø6 Ø Ø Deprat Ø Ø, Ø 0,6 6, Ø9 9, Round A0_009 Adapter Round 6 A0_00 Adapters Round A0_0 Adapters Round Gibus LS (Øe ) Round Round 9 Round A0_00 Adapters Deprat A0_00 Adapters Deprat /Welser 6 A0_06 Adapters Deprat 9 Ø Ø9 Ø ZF ZF 6 ZF 0 A0_0 Adapters Round Matest A0_0 Adapters Round 9 A0_00 Adapters Round Ø Ø6 Ø0 Octagonal Octagonal Octagonal ZF A0_00 Adapters ZF 0,, A0_009 Adapters ZF 6 A0_0 Adapters ZF 0 Octagonal -, A0_00 Adapters Octagonal, A0_006 Adapters Octagonal Welser tube, 6 A0_0 Adapters Octagonal Heroal Acmeda Dalex 6 + 0 / Eurothema / Gibus D / RollerBat 6 / Soprofen + Ø0 Ø6 Ø Ø Ø6 Ø Ø0 ZF 0 RollerBat 0 Deprat 9 Ø0 6, Others Ø Dalex 0 Dalex 6 Eurothema Gibus D RollerBat 6 Soprofen / Others Ø9 A0_0 Adapter Acmeda A0_0 Drive pulley suitable for multiple profiles A0_00 Adapters ZF 0 A0_0 Adapter RollerBat 0 A0_00 Adapters Deprat 9 ADAPTERS - SERIES Ø ADAPTERS - SERIES Ø 6 CHERUBINI AG0 AG0 CHERUBINI
0, Ø6, BRACKETS - Series Ø Roll Senso RX Tronic RX Plug&Play Plus Ocean Nm Nm Nm 0 Nm 0 Nm Plug&Play Ocean Easy Nm 0 Nm BRACKETS - Series Ø up to Nm 0 0 0 0 0 0 0 0 0 0 6 A06_0 mm square pin with omega bar, through holes A06_0 mm square pin with omega bar, holes 0 A06_0 Omega bar for mm square, with holes Ø A06_0 RTPFL support plate A06_06 Flanged mm square pin with omega bar, through holes A06_0 Flanged mm square pin with omega bar, holes M A06_0 Adjustable with mm square hole 0 Ø6,, A06_06 Bracket with mm square hole, with release M 0 0, 0 0 Ø 0 Ø6,, Ø6, 0 A06_0 Flanged mm square pin A06_0 Fixing plate for side covers A06_0 Plate DCRX A06_0 Adjustable with mm square hole, with release A06_0 Bracket with mm square hole, without release A06_0 Adjustable with mm square hole, without release A06_00 mm square pin with screw 0, 9 Ø 0 0 0 6 M Ø99 A06_06 Plate with hole cross A06_0 Flange with bolt square mm short A06_06 Flange with bolt square mm butterfly shape A06_09 "Vercelli"support plate A06_06 Plate 0x0 Ø6, M A06_0 Adjustable for Ocean 6 A06_0 Fastening sliding ring 0, Ø6 Ø Ø6 Ø A06_0 Motor head adapter mm - mm Allows to use all s of series Ø, A06_0 Plate 0x0 holes, Flange A06_0 Head adapter for Ocean, for fastening with fast coupling A06_0 BRACKETS - SERIES Ø BRACKETS - SERIES Ø CHERUBINI AG0 AG0 CHERUBINI9
0, up to Nm BRACKETS - Series Ø Wave RX Head in zama: Wave RX V Head in zama: Nm - Nm - Nm - Nm - 0 Nm - 0 Nm Nm - Nm - Nm - Nm - 0 Nm - 0 Nm / Nm ( rpm) - 0 Nm ( rpm) Wave Wire Head in zama: Nm - Nm - Nm - Nm - 0 Nm - 0 Nm Senso RX - Senso Wire Head in plastic: Nm - Nm - Nm / Nm (0 rpm) - Nm (0 rpm) 0 R0 0 Ø6, A06_06* Universal with wiring Ø A06_06* Inoutic side Ø, Ø, Ø, up to Nm Ø6, Ø A06_0* Anti-vibration with quick coupling Garda Head in zama: Garda RX Head in zama: Nm - Nm - Nm - Nm - 0 Nm - 0 Nm Nm - Nm - Nm - Nm - 0 Nm - 0 Nm 0 0 0 0 0 0 6 Attachment without s The motor head is made from high-performance metal and allows direct fastening to the awning s. The threaded holes with a centre-to-centre distance of mm give the possibility of adapting to any type of commonly available on the market and facilitate the installation and assembly of the motor under any conditions. Ø6 Ø Ø6 9 0 Ø, 6 A06_06 (head in zama) A06_0 (head in plastic) Flanged mm square pin with omega bar, through holes 0 A06_0 (head in zama) A06_06 (head in plastic) Flanged mm square pin with omega bar, holes 0 M A06_0 Adjustable with mm square hole, 0 0 Ø6,, A06_06 Bracket with mm square hole, with release Flange Ø6, A06_09 "Vercelli"support plate Ø A06_06 Plate 0x0 Ø6, A06_0 Bracket "Bloc-Baie" 6 Ø6, A06_0 Adjustable with mm square hole, with release, Ø6, A06_0 Bracket with mm square hole, without release A06_0 Adjustable with mm square hole, without release 0 A06_00 (head in zama) A06_069 (head in plastic) mm square pin with screw 9, 9, 6 Ø, - 6,, 6, Ø0 6,,, Ø,, 6 A06_0*** Fast coupling with spring split pins 6 A06_0* Universal with fast coupling M A06_0* Adjustable snap-on 0 A06_0* Snap-on with holder "Demi linteau" A06_09 Snap-on A06_09 Steel plate & snap-on Ø6 A06_096** Fast coupling in metal Ø Ø, 9 A06_00 Bracket with saddle square mm Ø9 Ø Ø, 0 6,6 0 Ø96 Ø, Ø Only for plastic head:, Ø, 6, 0 Ø6, Ø,, 0 A06_06* Fast coupling - "Wings" Ø6, Ø, Ø, 6 A06_06* Fast coupling on plate 0x0 * for the models with heads in plastic add plastic insert A06_06 *** not for heads in resin Ø6, Ø, 0 A06_06* Fast coupling on plate 0x0 Ø A06_0 (only for plastic head) Square pin mm ** for the models with heads in plastic add plastic insert A06_06 M A06_0 Screw-bolt square mm with unlock BRACKETS - SERIES Ø BRACKETS - SERIES Ø CHERUBINI AG0 AG0 CHERUBINI A06_06* Bracket for Coffrelite end cap * for the models with heads in plastic add plastic insert A06_06 ** for the models with heads in plastic add plastic insert A06_06, A06_06 Plastic insert for resin-head to metal Ø6 A06_06 Plastic insert to fast coupling in Zama
0, up to 0 Nm BRACKETS - Series Ø Roll Head in plastic: 6 Nm - Nm - Nm - Nm - 0 Nm - 0 Nm - 0 Nm / Nm (0 rpm) - Nm (0 rpm) 0 0 0 0 Roll Easy Head in plastic: Nm - Nm - Nm 0 0 Micro / Micro Easy Head in zama: Nm A06_0 Flanged mm square pin with omega bar, through holes A06_06 Flanged mm square pin with omega bar, holes A06_0 Omega bar for mm square, with holes A06_069 mm flanged square pin 9, 9, 9 0, 0 Ø96-6,, 6,, 6 A06_0 Fast coupling with spring split pins 6 A06_0 Universal with fast coupling A06_09 "Vercelli"support plate M A06_0 Adjustable snap-on, A06_0 Bracket with mm square hole, without release Ø6, A06_0 Adjustable with mm square hole, without release A06_06 Bracket for Coffrelite end cap A06_09 Snap-on A06_09 Steel plate & snap-on 6 Ø, 6 Ø9 Ø Ø, 0 Ø0 6,, 0, Ø, 0 A06_0 Snap-on with holder "Demi linteau" A06_0 Bracket "Bloc-Baie" 6 Ø6, Ø,, 0 A06_06 Fast coupling - "Wings" Ø6, Ø, Ø, 6 A06_06 Fast coupling on plate 0x0 Ø, Ø6 A06_096 Fast coupling in metal 0 A06_09 Mosquito screen short flanged square pin, Ø Ø, A06_00 Bracket with saddle square mm 9 M A06_0 Screw-bolt square mm with unlock Ø A06_0 Star-shaped mm square pin coupling removable head Ø6, Ø, 6,6 0 0 A06_06 Fast coupling on plate 0x0 Ø6 Ø Ø6 Ø A06_0 Square pin mm 0 0 up to 0 Nm R0 0 Ø6, A06_06 Universal with wiring 0 6 Ø A06_06 Inoutic side 0 Ø, Ø, Ø, 0 Ø, A06_0 Bracket 0 0 ZF - Croci - Veka system,, 9, A06_09 Plastival slide (short version) up to Nm, 6, A06_09 Plastival slide (long version) up to Nm Code Description Code Description - A06_0 Snap-on "Click OPTime" A06_00 OPTime fastening kit A06_0 OPTime fastening kit 6 Flange Ø6, M A06_0 Adjustable with mm square hole 0 Ø6,, A06_06 Bracket with mm square hole, with release Ø6, A06_0 Adjustable with mm square hole, with release A06_0 OPTime fastening kit A06_09 OPTime fastening kit A06_0 OPTime fastening kit A06_0 OPTime fastening kit 0 A06_06 OPTime fastening kit 0 A06_09 OPTime fastening kit 0 For OPTime s images see page 6 BRACKETS - SERIES Ø BRACKETS - SERIES Ø CHERUBINI AG0 AG0 CHERUBINI
0, up to Nm BRACKETS - Series Ø Ø, Ø, 0 Ø, 6, Ø Tronic RX Head in plastic: 6 Nm - Nm - Nm - Nm - Nm - 0 Nm - 0 Nm, Ø6 Ø6, Clima Plus RX - Clima RX Head in plastic: Nm - Nm - Nm - Nm - 0 Nm - 0 Nm A06_06 Plastic insert for resin-head to metal A06_06 Plastic insert to fast coupling in Zama A06_0* Anti-vibration with quick coupling Plug&Play Plus Head in plastic: 6 Nm - Nm - Nm - Nm - Nm - 0 Nm - 0 Nm Plug&Play - Plug&Play 000 Head in plastic: 6 Nm - Nm - Nm Plug&Play Short - Plug&Play Short RX Head in plastic: 6 Nm Attachment without s Thanks to the new head with sintered steel clamp, the motor may be mounted directly on the aluminium side pin. The clamp is on all motors with electronic limit switch and the head in resin, up to Nm. M 0 0 A06_0 Adjustable with mm square hole 0 6 up to Nm Ø6,, A06_06 Bracket with mm square hole, with release Ø6, A06_0 Adjustable with mm square hole, with release 0 0 0 A06_0 Flanged mm square pin with omega bar, through holes 9, 9 Ø, 6 0 0 0 6 A06_0* Universal with fast coupling M A06_0* Adjustable snap-on A06_09 "Vercelli"support plate A06_0 Bracket "Bloc-Baie" 6 A06_06 Flanged mm square pin with omega bar, holes 0 0 A06_0 Omega bar for mm square, with holes 0 A06_069 mm flanged square pin, Ø6, A06_0 Bracket with mm square hole, without release 6 Ø9 Ø Ø, 0 6,6 0, - 6,, 6, Ø0 Ø,, Ø, 0 A06_0* Snap-on with holder "Demi linteau" Ø6, Ø,, 0 A06_06* Fast coupling - "Wings" Ø6, Ø, Ø, 6 A06_06* Fast coupling on plate 0x0 Ø6, Ø, 0 A06_06* Fast coupling on plate 0x0 A06_0 Adjustable with mm square hole, without release A06_09 Snap-on A06_09 Steel plate & snap-on Ø6 A06_096** Fast coupling in metal 0 A06_09 Mosquito screen mm short flanged square pin Ø A06_0 Square pin mm * add plastic insert A06_06 ** add plastic insert A06_06 0 R0 0 A06_06* Universal with wiring Ø6, A06_06* Inoutic side Ø Ø, Ø, Ø, BRACKETS - SERIES Ø up to Nm BRACKETS - SERIES Ø CHERUBINI AG0 AG0 CHERUBINI 6,,, Ø Ø, A06_00 Bracket with saddle square mm 9 * add plastic insert A06_06 M A06_0 Screw-bolt square mm with unlock 0, Ø A06_0 Star-shaped mm square pin coupling removable head Ø96 A06_06* Bracket for Coffrelite end cap Flange Ø6 Ø Ø6, Ø6
6 0 0 6 0 0 0 0 6 6 0 0 0 0 6 0 6 0 6 0 0 BRACKETS - Series Ø Tronic RX Clima Plus RX - Clima RX Plug&Play Plug&Play 000 Plug&Play Plus Plug&Play Short Plug&Play Short RX BRACKETS - Series Ø Tubular motors for awnings: Wave RX - Wave RX V - Wave Wire - Garda Attachment without s The motor head is made from high-performance metal and allows direct fastening to the awning s. The threaded holes with a centre-to-centre distance of mm give the possibility of adapting to any type of commonly available on the market and facilitate the installation and assembly of the motor under any conditions., 9, up to Nm 6, 0 Ø, Tubular motors for awnings: Wave RX - Wave RX V - Wave Wire - Garda - Standard fastening Tubular motors for rolling shutters: Tronic RX - Clima Plus RX - Clima RX - Garda,, 0 Ø, 0 Ø, 9, Ø 0 A06_09 Plastival slide (short version) A06_09 Plastival slide (long version) A06_0* Bracket 0 0 ZF - Croci - Veka A06_09 SLO support plate 6 s up to Nm Ø6,, A06_0 Fast coupling with spring split pins A06_06 Plate 0x0 A06_0 Square pin 6 mm 0 - A06_0* Snap-on "Click OPTime" A06_00* OPTime fastening kit A06_0* OPTime fastening kit A06_0* OPTime fastening kit 6 6 6 0 A06_0 Square pin 6 mm with omega bar M A06_0 Adjustable with 6 mm square hole (up to Nm) 6 0 A06_06* OPTime fastening kit 0 A06_0* OPTime fastening kit 6 A06_09* OPTime fastening kit A06_0* OPTime fastening kit 0 Motor with override: Ocean 0 A06_09* OPTime fastening kit 0 * add plastic insert A06_06 FIXING KIT Plate Bracket in plastic SYSTEM Fastening without screws: Compatible on all kind of side caps. Possibility of adjustment on all positions. 0 Ø, 6, Ø6 A06_06 Plastic insert to fast coupling in Zama BRACKETS - SERIES Ø BRACKETS - SERIES Ø 6 CHERUBINI AG0 AG0 CHERUBINI Ø A06_06 Plate 0x0 0 Ø Ø6, Ø6, 6 A06_0 Square pin 6 mm with omega bar for override 6 M A06_0 Adjustable with 6 mm square hole (up to Nm)
ACCESSORIES FOR MANUAL OPERATION LOCKERS COMPONENTS Ref. 0L CH0 Operating crank length 0 cm Ref. 6 0G Foldable crank with hook length 0 cm Ref. 0 OCNK Outlet, plate in nickel plated Zama, with eye 0 Screw down hard hangers for octagonal tube - mesh 0 Screw down hard hangers for octagonal tube - meshes 0 Screw down hard hangers for octagonal tube - meshes For Ocean and Plug & Play Ocean Easy motor series Ref. 0 OC6 Outlet, fast coupling with eye Ref. 06 Magnetic outlet with plate Ref. 0 OCNK (nickel plated) Ref. 0 OC6 (Ral 6) Return at, fast coupling with eye Ref. 96 Ref. 06M Ref. 06V Magnetic outlet without plate Ref. 0 CA6 + CA6 magnetic + magnetic gear reduction Ref. Ref. 0 Hexagonal pole w/0 mm protrusion+screw Ref. 0 Hexagonal pole w/ mm protrusion+screw Ref. Hexagonal pole w/ mm protrusion+screw A6_6 Hard hanger meshes A6_ Hard hanger ring Octagonal A6_ Hard hanger meshes A6_9 Hard hanger ring Octagonal Ref. 0 CH6 Eye with hexagon 6 mm Ref. 0 CH6 Eye with hexagon 6 mm Ref. CH6 Eye with hexagon 6 mm Ref. CH6 Eye with hexagon 6 mm Ref. Plate x0x mm Hole cover plate designed for manual override on cassette ACCESSORIES FOR MANUAL OPERATION LOCKERS COMPONENTS CHERUBINI AG0 AG0 CHERUBINI9