Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules... 5 41003002 Systems... 6 Power supply units... 7 Backplanes... 8 41096005 41096010 Grid Assembly ETSI and 19" PC cabinet 41097003 Accessories... 9 Appendix... 10 Standards External and internal dimensions correspond to: IEC 60297, Part 1 and 2 IEC 60917-2-1 Internal dimensions correspond to: ETS 300119, Part 2 Protection IP 55 IEC 60529 Protective earth connections correspond to: EN 50178 Modifications Special colours Special sizes Customized solutions Further important information can be found on the Internet under www.schroff.biz 1.2 UK 06/2003 For further informationen... www.schroff.biz
Cabinets Overview... 1.2 19" Electronic and PC cabinet Industrial cabinet with IP 55 and high stability Welded steel frame with 25 mm grid Internal assembly to ETSI possible Load carrying capacity 600 kg Standard cabinets Standard Cabinets Electronics cabinet with front door...1.4 Universal cabinet with steel door...1.5 PC...1.6 41098005 Electronic Cabinet 41003001 Universal cabinet PC Cabinet 41097004 Accessories Door retainer...1.7 Door hinge 180...1.7 Document pocket...1.8 Lifting eye...1.8 Base/plinth...1.9 Mobile plinth...1.9 Adjustable support feet...1.10 Castors...1.10 Earthing kit...1.11 Assembly parts...1.11 Mounting plate...1.12 Mounting rails / Support rails...1.13 Traverses supports..1.14 19" panel/ slide mounts...1.14 Threaded inserts...1.16 Identification strips.1.16 Metric panel mounts...1.17 19" cover plate...1.17 Slide rails...1.18 19" swing frame...1.19 19" shelf...1.20 Universal shelf...1.22 Further accessories.1.72 Individual configuration individual configuration ServicePLUS...1.23 PLA45426 width depth height 600 600 600 800 800 600 800 800 1400 1600 1800 2000 2200 For further informationen... www.schroff.biz UK 06/2003 1.3
Cabinets Electronics cabinet with front door Type of protection IP 55 Glazed front door Including 19" panel mounts Finish RAL7035 Delivery through Service plus (assembled) 1 1 Frame, welded, 2.5 mm steel, RAL 7035 2 2 Side panels 3 1 Rear door, steel, incl. lever handle, left hand hinged, door opening angle 120 4 1 Glazed front door, safety glass,incl. lever handle, door opening angle 120 5 1 Top cover, plain 6 1 Base plate 7 2 19" panel mount, front Illustration shows cabinet (10127-129) with 2 depth members (21127-111) 41098005 Height Height Width Depth Plinth height 100 mm Mobile base/ plinth 2 19" panel mounts 2 depth members U mm mm mm Order No. Order No. Order No. Order No. Order No. 38 1800 609 600 10127-129 25127-242 20127-541 24127-516 21127-111 38 1800 609 800 10127-130 25127-243 20127-541 24127-516 21127-112 43 2000 609 600 10127-131 25127-242 20127-541 24127-518 21127-111 43 2000 609 800 10127-132 25127-243 20127-541 24127-518 21127-112 Assembly kit for 2 depth members 21199-183 /oneclick 1.4
Cabinets Universal cabinet with steel door Type of protection IP 55 Steel front door For individual mounting (e.g. with mounting plate, useable as switch gear cabinet Finish RAL 7035 (assembled) 1 1 Frame, welded, 2.5 mm steel, RAL 7035 2 2 Side panels 3 1 Steel front door, incl. lever handle, door opening angle 120 4 1 Rear panel 5 1 Top cover 6 1 Base plate 41003001 Height Height Width Depth Plinth height 100 mm Mobile base/ plinth 2 19" panel mounts 2 depth members U mm mm mm Order No. Order No. Order No. Order No. Order No. 38 1800 609 600 10127-160 25127-243 20127-541 24127-516 21127-111 38 1800 609 800 10127-161 25127-242 20127-541 24127-516 21127-112 43 2000 609 600 10127-162 25127-243 20127-541 24127-518 21127-111 43 2000 609 800 10127-163 25127-242 20127-541 24127-518 21127-112 Assembly kit for 2 depth members 21199-183 1.5
Cabinets PC Type of protection IP 55, also with open keyboard Telescopic keyboard and mouse shelf Finish RAL 7035 (assembled) 1 1 Frame, welded, 2.5 mm steel, RAL 7035 2 2 Side panels 3 1 Top cover 4 1 Rear door incl. lever handle, door opening angle 120 5 1 Glass door at top with safety glass, lockable, door opening 120 6 1 Monitor shelf at top, load-carrying capacity 75 kg 7 1 Keyboard chassis 8 1 Steel door at bottom, lockable 9 1 Base/plinth plain, 100 mm high Height H Width B Depth T Order no. mm mm mm 1700 609 600 10127-083 1700 609 800 10127-084 1900 609 600 10127-085 1900 609 800 10127-086 41097004 Note All parts from and all parts from the cabinet accessories are suitable for the further assembly in the cabinet PLA45727 Cabinet depth Mounting height Width Height Depth mm mm mm mm 600 Monitor 530 550 1) 560 600 PC 530 730 560 600 Keyboard chassis 480 75 350 800 Monitor 530 550 1) 560 800 PC 530 730 560 800 Keyboard chassis 480 75 350 1) 750 mm high with a cabinet height of 1900 mm 1.6
Cabinets Door retainer For steel doors Assembly at top or bottom possible No drilling necessary (kit) 1 1 Bracket, steel, zinc-plated 2 1 Guide plate, steel, zinc-plated 3 1 Arm, steel, zinc-plated 4 1 Assembly kit PLA45717 Description Order No. Door retainer 22127-320 Note Not suitable for doors with 180 hinges. Door hinge 180 1 3 180 door hinge, steel, RAL 7021 2 1 Assembly kit Description Order No. Door hinge 180 22127-319 PLA45716 1.7
Cabinets Document pocket 2 versions: - for mounting in the door frame for files (item 1) - For bonding to any position for A4 documents (item 2) 1 or 2 1 Document pocket 3 1 Assembly kit PLA45723 Item Type For cabinet width Material Order no. mm 1 for door frame 600 1.5 mm steel 20127-335 2 for bonding 600 / 800 PS 12421-592 Note When using 19" panel mounts, it is not possible to install them in the front most position. Lifting eye Thread M12 Application and loading as per DIN 580 Description Qty Order No. Lifting eye 4 20114-247 PLA45312 1.8
Cabinets Base/plinth 100 mm/200 mm For spacing cabinet from floor Removable panels, thus cable entry possible on all sides Support feet can be used Floor mounting possible with corner pieces PLA45449 1 4 Cover panels 2a 4 Corner pieces with 100 mm base/plinth height 2b 8 Corner pieces at 200 mm base/plinth height 3 1 Assembly kit Plinth height 100 mm Plinth height 200 mm For cabinet width For cabinet depth Order No. Order No. mm mm 600 600 25127-242 25127-258 600 800 25127-243 25127-259 W = cabinet width, D = cabinet depth, H = base/plinth height PLA45472 Note Combination with castors is not possible. Mobile plinth For cabinet depth 600 mm and 800 mm Load-carrying capacity: 375 kg Open at bottom (kit) 1 1 Base/plinth, die-cast aluminium, RAL 7035 2 4 Castors, PA 3 2 Rubber mats, natural rubber, black, self-adhesive 4 1 Assembly kit For cabinet width Depth t Order No. mm mm mm 600 890 157 20127-541 PLA45309 1.9
Cabinets Adjustable support feet For levelling on uneven floors Load-carrying capacity 125 kg per foot For mounting on cabinet or on standard plinth Type Qty Order no. Support feet, steel, polyamide, black 4 20127-530 1) with plinth = 1 to 12 mm without plinth = 24 to 36 mm PLA45310 Castors Load-carrying capacity: 100 kg per castor Recommended load: max. 300 kg per cabinet (kit) 1 2 Castors locking, PS/steel 2 2 Castors non-locking, PA/steel 3 1 Assembly kit Description Order No. Castors 20114-571 TRA44465 1.10
Cabinets Earthing kit Enables IEC-compliant earthing. 1 10 Wires 310 mm long 2 1 Assembly kit Description Order no. Earthing kit 21101-615 Earthing kit 1 wire, 310 mm long, including assembly parts 21101-616 Earthing kit for 1 telescopic shelf 21101-178 AZA43284 Rectangular cage nuts for Zubehör For mounting of panel mounts, mounting rails, swing frame and other accessories on the frame Can be clipped in from the front into the grid holes of the frame and mounting rails Thread M6 Type Qty Order No. Rectangular cage nuts without GND/earthing 100 21101-607 Rectangular cage nuts with GND/earthing 100 21101-608 PLA45314 Assembly parts Zubehör Assembly kit for installation of 19" components Item Type Qty Order No. 1 Pan head screw M6 16 100 21101-863 2 Cage nut M6 100 21100-004 3 Plastic washer, black 100 21100-016 SC128 1.11
Cabinets Mounting plate For mounting electrical components and modules incl. wiring With slide and stop blocks for energy-saving installation and removal Load-carrying capacity 500 kg 1 1 Mounting plate, 3 mm steel, zinc-plated 2 1 Assembly kit Item 3: mounting position furthest to rear Item 4: 25 mm forward mounting PLA45313 For cabinet height H h For cabinet width B b Order no. mm mm mm mm mm mm 1600 1485 1550.5 600 530 495.4 21127-055 1800 1685 1650 600 530 495.4 21127-057 2000 1885 1850.5 600 530 495.4 21127-059 Additional mounting angle for mounting plate with heavy components, incl. assembly kit, 2 pieces 21101-723 Note For heavy installed components with forward mounting position, additional mounting rails are required for installation Additional mounting angle for mounting plate PLA45471 41003050 1.12
Cabinets Mounting rails with 1 row of holes For setting up mounting plane in any position 1 4 Mounting rail with 1 row of holes, 2 mm steel, zincplated PLA45479 For cabinet height For cabinet width For cabinet depth L X Order no. mm mm mm mm mm 600 445 425 21127-087 800 645 625 21127-088 600 545 525 21127-089 1600 1495 1475 21127-091 1800 1695 1675 21127-092 Assembly kit for mounting rails (cabinet depth, cabinet width), 1 kit 21199-182 Assembly kit for mounting rails for cabinet height, 1 kit 21101-614 Mounting rails with 3 rows of holes For setting up mounting plane in any position 1 2 Mounting rail with 1 row of holes, 2 mm steel, zincplated PLA45478 For cabinet height For cabinet width For cabinet depth L X Order No. mm mm mm mm mm 600 445 425 21127-111 800 645 625 21127-112 600 545 525 21127-113 1600 1495 1475 21127-115 1800 1695 1675 21127-116 2000 1895 1895 21127-117 Assembly kit for 2 depth members for mounting rails (cabinet depth, cabinet width), 1 set 21199-183 Assembly kit for mounting rails for cabinet height, 1 kit 21101-614 T = cabinet depth PLA45604 1.13
Cabinets Support rails Support rails enable installation of heavy components (e.g. transformers) in the base area. The rails are bolted to the frame, already installed base plates do not obstruct. Installation in the cabinet width. PLA45733 1 2 Support rails, steel, zinc-plated 2 4 Slide nuts with M10 bolts, for mounting installed components 3 1 Assembly kit For cabinet width L Order no. mm mm 600 534 12424-204 PLA45732 19" panel/slide mounts For mounting chassis, subracks, distribution and blank panels Mounting directly on the frame or on depth member As per IEC 297 1 2 19" panel/slide mount, 2 mm steel, see table 2 1 Assembly kit, incl. earthing PLA45434 For cabinet height Usable height Length AlZn RAL 7035 light grey mm U mm Order no. Order no. Partial-height mounting 9 400 24127-370 24127-399 Partial-height mounting 12 533 24127-484 24127-505 Partial-height mounting 16 711 24127-485 24127-506 Partial-height mounting 20 889 24127-487 24127-508 Partial-height mounting 25 1111 24127-489 24127-510 1400 29 1289 24127-491 24127-512 1600 33 1467 24127-384 24127-413 1800 38 1689 24127-495 24127-516 2000 42 1867 24127-389 24127-418 Cage nut M6 Zinc-plated steel, 100 pieces 21100-004 1.14
Cabinets 19" panel mounts with T-groove (465 mm) For insertion of slide nuts For infinitely variable height adjustment of installation components 1 2 19" panel mount, aluminium 2 1 Assembly kit, incl. earthing 41003051 For cabinet height Usable height Length Order no. mm U mm Partial-height mounting 12 534 21127-549 Partial-height mounting 16 712 21127-550 Partial-height mounting 20 890 21127-551 Partial-height mounting 25 1112 21127-552 1400 29 1290 21127-553 1600 34 1467 21127-554 1800 38 1690 21127-555 2000 43 1911 21127-556 Slide nut M6, nickel-plated, 100 pieces 21101-250 For installation of 19" panel mounts with T-groove, at least 2 sets of depth members are required, see page 1.13 biz/oneclick 1.15
Cabinets Threaded inserts for 19" panel mounts with T-groove Threaded inserts are inserted into the T-groove. This produces a defined U/SU grid Slide nuts become superfluous, height adjustment is not necessary. Subsequent installation is possible 2 versions: -19 with EIA perforation -mep with metric perforation (25 mm grid) 1 2 Threaded insert, 3 mm steel, zinc-plated, thread M6 PLA45574 19" threaded insert (EIA) mep threaded insert Usable height Order no. Usable height Order no. U SU 18 24114-019 28 24114-037 20 24114-020 35 24114-038 25 24114-021 44 24114-039 29 24114-022 51 24114-040 34 24114-024 60 24114-042 38 24114-025 67 24114-043 43 24114-027 74 24114-045 U height identification strips for 19" panel mounts with T-groove For sliding into panel mounts The measurement units are given in U and millimetres Subsequent installation is possible 1 2 U height identification strip, PS 0.3 mm, white PLA45583 U height identification strips 19" mep U height identification strips Height Height Order No. Order No. U mm 34 1467 22127-343 22127-346 43 1911 22127-344 Note U height identification strips are easy to shorten 1.16
Cabinets Metric panel mounts (515 mm) Metric components As per IEC 917-2-1 1 2 Metric panel mounts, bolt-on dimension 515 mm, 2 mm steel, RAL 7035 2 1 Assembly kit, incl. earthing 41001547 For cabinet height Usable height Length Order no. mm SU mm Partial-height mounting 18 450 24127-594 Partial-height mounting 40 1000 24127-604 1600 60 1500 24127-745 1800 68 1700 24127-749 2000 76 1900 24127-753 For installation of metric mounts, at least 2 sets of depth members are required, see page 1.13 19" cover plate For 600 mm wide cabinets with 19" mounting Upper and lower ends of 19" panel mounts. Inserting the 19" cover plates closes the gap between 19" components" and the frame. 1 2 19" cover plates, aluminium profile 2 1 Assembly kit Description Order no. 19" cover plate 21127-215 PLA45704 1.17
Cabinets Slide rails For safe and simple installation of heavy 19" subracks. The rails are suspended in 19" panel mounts Can be attached in 1 U increments Load-carrying capacity max. 25 kg per pair 1 10 Slide rail for attaching, 1.5 mm steel, AlZn finish 2 1 Assembly kit L = length PLA45437 For cabinet depth Length Usable depth Qty Order no. mm mm mm 400 217 299 10 21127-195 500 317 399 10 21127-196 600 417 499 10 21127-197 800 617 699 10 21127-198 useable depth corresponds the distance of the 19"-panel/slide mounts Short slide rail Support for heavy 19" subracks For attachment in the 19" profiles Load-carrying capacity max. 15 kg per pair 1 10 Slide rail, 1.5 mm steel, AlZn finish 2 1 Assembly kit ERA46348 Description Order No. Short slide rail 20118-593 SC96 1.18
Cabinets 19" swing frame For assembly of 19" subracks in 600 mm wide cabinets. The pivot point can be optionally on the right or on the left 2 finishes: Powder-coated in RAL 7035 or zinc-plated Load-carrying capacity 150 kg (kit) 1 2 19" swing frame, 2 mm steel 2 2 Support bars, 3 mm steel 3 2 Square locks 8 mm, Zn/steel, chrome-plated, incl. 2 keys 4 1 Assembly kit Maximum mounting depth for chassis T max. =200 mm h1 = Height h2 = useable Height Swing frame stop SZA44688 For Cabinet height Height Usable height RAL 7035 light grey zinc-plated mm mm U Order no. Order no. Partial-height mounting 725 12 21127-001 Partial-height mounting 1125 21 21127-003 1600 1525 30 21127-004 1800 1725 34 21127-005 21127-012 2000 1925 39 21127-006 21127-013 Safety lock for replacement of the square lock, including 2 keys 60113-267 Spare key 1 unit 60220-003 Swing frame stop 120 St, RAL 7035 21127-216 Note Swing frame mounted in front position, requires no further assembly parts Swing frame partial height No further assembly parts required Swing frame recessed: 2 pairs of depth members required (3 row), see page 1.13 TRTP0012 1.19
Cabinets Type A Stationary 19" shelf For mounting on four 19" panel/slide mounts or 19" panel mounts with T-groove 2 assembly options - Type A: maximum surface area - Type B: reduce with shelves for cable ducting at sides Load-carrying capacity 75 kg Material: 1.5 mm steel plate, RAL 7035 Type A shortened, deepened installation PLA46577 Type For cabinet depth T Shelf Order no. deepened b t installation mm mm mm mm Type A 600 477 343 21127-161 Type A 600 800 477 443 21127-162 Type A 800 477 643 21127-163 Type B 600 403 360 21127-188 Type B 600 403 460 21127-189 Type B 800 403 560 21127-190 Type B 800 403 660 21127-191 Mounting bracket required for type B 22114-349 Earthing kit 1 wire, 310 mm long, including assembly parts 21101-616 Shelf support 1 unit 22127-877 Depth member for recessed installation 600 mm cabinet depth 22117-376 Depth member for recessed installation 800 mm cabinet depth 22117-377 Type B PLA46578 If shortened stationary shelves are used, a set of depth members incl. assembly kit must be ordered, see page 1.13 w = shelf width d = shelf depth D = cabinet depth PLA46579 1.20
Cabinets 19" telescopic shelf Shelves telescopic, stationary 19" shelf can be assembled on telescopic slide rails For mounting on four 19" panel/slide mounts Load-carrying capacity: 50 kg Recessed installation 41002050 For cabinet depth For cabinet depth recessed installation Shelf Telescopic slides (2 pieces) w D Order no. Order no. mm mm mm mm 600 403 360 21127-188 22114-344 600 403 460 21127-189 22114-340 800 403 660 21127-191 22114-342 800 403 560 21127-190 22114-345 Earthing kit for 1 telescopic shelf 21101-178 T-bar lock (on the right or left), 1 unit 21101-132 Shelf support 1 unit 22127-877 Note Shorter shelves can also be mounted on the telescopic slide rail (max. 200 mm shorter) Please order shelf support separately w = shelf width d = shelf depth D = cabinet depth Tabe of dimensions For cabinet depth D mm 600 350 800 550 Extension length d 1 mm 41002051 1.21
Cabinets Universal stationary shelf For mounting on cabinet frame Cabinet dimensions B T mm Surface area b t mm Order no. 600 600 mm 548 494 mm 21127-147 600 800 mm 548 694 mm 21127-148 Earthing kit 1 wire, 310 mm long, including assembly parts 21101-616 Shelf support for 600 mm wide cabinets, 1 unit 22127-881 PLA46581 Note If depth members or mounting rails are used, shorter shelves can also be used PLA46582 Universal telescopic shelf Cabinets For mounting on cabinet frame Please order telescopic slides separately Cabinet dimensions B T Surface area b t Telescopic slides (2 pieces) mm mm Order No. Order No. 600 600 mm 475 460 mm 21127-169 21127-182 600 800 mm 475 660 mm 21127-171 21127-183 Earthing kit for 1 telescopic shelf 21101-178 T-bar lock (on the right or left), 1 unit 21101-132 Shelf support for 600 mm wide cabinets, 1 unit 22127-879 PLA46583 Note Shorter shelves can also be mounted on the telescopic slides (max. 200 mm shorter) Cable carrier for telescopic shelves see chapter cabinet - accessories 1.22
Cabinets ServicePLUS P The special assembly service We assemble to your specifications Environmentally friendly by only one package Please talk to our local sales departement concerning availability and delivery time How to order? After the order no., write the index /05 (e.g. 20123-456/05) and specify the desired installation position. When no position is specified; equipment is mounted in a standard position. www.schroff.biz/serviceplus further dimensions further accessories technical data PLA45426 /serviceplus 1.23
Cabinets Service PLUS P www.schroff.biz/serviceplus further dimensions further accessories technical data Order information Frame RAL 7035 Side panel RAL 7035 Rear panel RAL 7035 Steel door RAL 7035 Glass door RAL 7035 Cover frame RAL 7035 PLA45442 PLA45443 PLA45444 PLA45446 PLA45445 PLA45708 Qty 1 piece 2 pieces 1 piece 1 piece 1 piece 1 piece Cabinet dimensions Line Height Width Depth No. U mm mm mm 1 29 1400 600 600 20127-613 22127-391 20127-698 22127-408 20127-725 22127-417 2 33 1600 600 600 20127-572 20127-644 20127-686 20127-736 20127-716 22127-076 3 33 1600 600 800 20127-573 20127-645 20127-686 20127-736 20127-716 22127-076 4 38 1800 600 600 20127-576 20127-648 20127-687 20127-737 20127-717 22127-077 5 38 1800 600 800 20127-577 20127-649 20127-687 20127-737 20127-717 22127-077 6 38 1800 800 600 20127-580 20127-648 20127-688 20127-738 20127-718 7 38 1800 800 800 20127-581 20127-649 20127-688 20127-738 20127-718 8 42 2000 600 600 20127-585 20127-653 20127-689 20127-739 20127-719 22127-078 9 42 2000 600 800 20127-586 20127-654 20127-689 20127-739 20127-719 22127-078 10 42 2000 800 600 20127-589 20127-653 20127-690 20127-740 20127-720 11 42 2000 800 800 20127-590 20127-654 20127-690 20127-740 20127-720 12 47 2200 600 600 20127-592 20127-656 20127-691 20127-741 20127-721 22127-079 13 47 2200 600 800 20127-593 20127-657 20127-691 20127-741 20127-721 22127-079 1.24
Cabinets Service PLUS P www.schroff.biz/serviceplus further dimensions further accessories technical data Order information Top cover RAL 7035 Top cover raised RAL 7035 Top cover for fan tray RAL 7035 Base plate IP 55 Base plate with filter Base/plinth 100 mm PLA45447 PLA45447 PLA45599 PLA45448 PLA45448 PLA45449 Qty 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece cabinet dimensions Line Height Width Depth No. U mm mm mm 1 29 1400 600 600 20127-769 20127-805 21127-656 25127-456 25127-580 25127-242 2 33 1600 600 600 20127-769 20127-805 21127-656 25127-456 25127-580 25127-242 3 33 1600 600 800 20127-770 20127-806 21127-658 25127-457 25127-581 25127-243 4 38 1800 600 600 20127-769 20127-805 21127-656 25127-456 25127-580 25127-242 5 38 1800 600 800 20127-770 20127-806 21127-658 25127-457 25127-581 25127-243 6 38 1800 800 600 20127-773 20127-809 21127-661 25127-461 25127-585 25127-246 7 38 1800 800 800 20127-774 20127-810 21127-663 25127-462 25127-586 25127-247 8 42 2000 600 600 20127-769 20127-805 21127-656 25127-456 25127-580 25127-242 9 42 2000 600 800 20127-770 20127-806 21127-658 25127-457 25127-581 25127-243 10 42 2000 800 600 20127-773 20127-809 21127-661 25127-461 25127-585 25127-246 11 42 2000 800 800 20127-774 20127-810 21127-663 25127-462 25127-586 25127-247 12 47 2200 600 600 20127-769 20127-805 21127-656 25127-456 25127-580 25127-242 13 47 2200 600 800 20127-770 20127-806 21127-658 25127-457 25127-581 25127-243 1.25
Cabinets ServicePLUS P www.schroff.biz/serviceplus further dimensions further accessories technical data Order information Ventilated base/plinth 100 mm Mounting plate zinc-plated 19"-Panel mount RAL 7035 1) Panel/slide mount metric 515 1) Depth member 2) Reducing depth member PLA45449 PLA45453 PLA45451 PLA45451 41001557 41001561 Qty 1 piece 1 piece 2 pieces 2 pieces 2 pieces 2 pieces Cabinet dimensions Line Height Width Depth No. U mm mm mm 1 29 1400 600 600 25127-424 20127-907 21127-111 2 33 1600 600 600 25127-424 21127-055 20127-908 21127-111 3 33 1600 600 800 25127-425 21127-055 20127-908 21127-112 4 38 1800 600 600 25127-424 21127-057 20127-909 20127-978 21127-111 5 38 1800 600 800 25127-425 21127-057 20127-909 20127-978 21127-112 6 38 1800 800 600 25127-428 21127-058 20127-909 20127-978 22127-474 7 38 1800 800 800 25127-429 21127-058 20127-909 20127-978 22127-476 8 42 2000 600 600 25127-424 21127-059 20127-910 20127-979 21127-111 9 42 2000 600 800 25127-425 21127-059 20127-910 20127-979 21127-112 10 42 2000 800 600 25127-428 21127-060 20127-910 20127-979 22127-474 11 42 2000 800 800 25127-429 21127-060 20127-910 20127-979 22127-476 12 47 2200 600 600 25127-424 21127-061 20127-911 20127-980 21127-111 13 47 2200 600 800 25127-425 21127-061 20127-911 20127-980 21127-112 1) cabinet width 800 mm reduced depth member necessary 2) Assembly kit 21199-183 necessary 1.26
Cabinets ServicePLUS P www.schroff.biz/serviceplus further dimensions further accessories technical data Order information 19"-Shelf stationary 3) 19"-Shelf telescopic 3) Telescopic Slide Universal-Shelf stationary Universal-Shelf telescopic Telescopic Slide 41003056 41003057 41003054 41003055 Qty 1 piece 1 piece 2 pieces 1 piece 1 piece 2 pieces Cabinet dimensions Line Height Width Depth No. U mm mm mm 1 29 1400 600 600 21127-162 21127-189 22114-340 21127-147 21127-169 21127-182 2 33 1600 600 600 21127-162 21127-189 22114-340 21127-147 21127-169 21127-182 3 33 1600 600 800 21127-163 21127-191 22114-342 21127-148 21127-171 21127-183 4 38 1800 600 600 21127-162 21127-189 22114-340 21127-147 21127-169 21127-182 5 38 1800 600 800 21127-163 21127-191 22114-342 21127-148 21127-171 21127-183 6 38 1800 800 600 21127-151 21127-174 21127-182 7 38 1800 800 800 21127-152 21127-176 21127-183 8 42 2000 600 600 21127-162 21127-189 22114-340 21127-147 21127-169 21127-182 9 42 2000 600 800 21127-163 21127-191 22114-342 21127-148 21127-171 21127-183 10 42 2000 800 600 21127-151 21127-174 21127-182 11 42 2000 800 800 21127-152 21127-176 21127-183 12 47 2200 600 600 21127-162 21127-189 22114-340 21127-147 21127-169 21127-182 13 47 2200 600 800 21127-163 21127-191 22114-342 21127-148 21127-171 21127-183 3) at 19"-Bracket on the Frame Further accessories P Order information Description Qty Order no. Door hinge 180 1 22127-319 Lever handle 1 20127-333 Lifting eye 4 20114-247 Adjustable support feet 4 20127-530 Earthing kit (cabinet) 1 21101-615 Earthing kit (shelf stationary) 1 21101-616 Earthing kit (shelf telescopic) 1 21101-178 T-bar lock 1 21101-132 1.27