Hospitality Fixtures

Hospitality Fixtures Catalog #1202

HOSPITALITY FIXTURES Table of Contents This catalog is part of a series of catalogs describing our full product line. The series consists of the following: Catalog I - Public Guidance Systems Catalog II - Hospitality Fixtures Catalog III - Railing Components Our large on-hand inventory, knowledgeable sales staff and highly skilled design/manufacturing department, provide you with a quick delivery of products that meet your exact needs. Lavi Industries was founded in 1979 for the purpose of producing architectural products that meet the highest quality standards for the commercial environment. We recognize the high demand placed on our products, and therefore they are crafted and finished to meet the expectations of the most discriminating client. We invite you to participate in our quest for excellence. The products in this catalog are continuously being developed and improved upon. Specifications, data and dimensions may change without notice. When these specifications or colors are critical, consult factory for current information. Sneeze Guards 3-5 Food Display Cases 6 Tray Slides And 7 Service Rails Prefabicated Booth 8-9 Divider Posts Stemware Racks 10-11 Coat Racks And 12 Podiums Bellman s Carts 13 Closet Hardware 14 Finishes and Specifications 15 East Coast Facilities Lavi Industries - New York Two Geneva Road Brewster, New York 10509 877.213.lavi (213.5284) 845.278.1766 845.278.1765 fax West Coast Facilities Lavi Industries - California 27810 Avenue Hopkins Valencia, California 91355 877.ask.lavi (275.5284) 661.257.7800 661.257.4938 fax 2

Sneeze Guards HOSPITALITY FIXTURES Size: 2 inch diameter tubing. Clear coated polished brass, chrome plated or Lido-Tone powder Please use one of the following prefixes for finish designation: 00 Brass 02 Clear Coat Brass 10 Chrome 20 Lido-Tone 40 Stainless Steel, Polished 44 Stainless Steel, Satin Example: 02-880/L Lido-Tone custom powder coat colors Model 880 sneeze guard is designed for one way food access on counter tops. Top glass shelf supports are optional for decorative display purposes. Recommended post spacing is 3 feet. The Model 881 food display case (below) combines a full view with a top shelf for serving. This model can be specified with or without light fixtures. Recommended post spacing is 3 feet. 881/L Left Post 881/C Center Post 881/R Right Post 880/L Left Post 880/C Center Post 880/R Right Post Wall Flange (Standard) Cut Flange (Optional) Narrow (cut) flanges or floor flanges may be substituted upon request. See page 9 for alternative flange type and sizes. 16" Height 13" Width Sizes: 1-1/2 or 2 inch diameter tubing. Stainless steel, clear coated polished brass, chrome plated or Lido-Tone powder 14" Width Light Fixture Stainless Steel Channel 880 Single Faced Sneeze Guard 1 Width Optional Glass Supports 881 Single Faced Server Side Food Display Case 13" Width 2 Height 3

HOSPITALITY FIXTURES Sneeze Guards 882 Double Faced Sneeze Guard Size: 2 inch diameter tubing. Clear coated polished brass, stainless steel, or Lido-Tone powder 884 Adjustable Angle Sneeze Guard Size: 2 inch diameter tubing. Clear coated polished brass, chrome plated or Lido-Tone powder Model 882 sneeze guard is ideally suited for island locations. Top shelf glass supports are standard features. Recommended post spacing is 3 feet. 882/E End Post 882/C Center Post The Model 884 sneeze guard (below) uses standard tubing and fittings and the Series 370 brackets with integral slots for 1/4" glass panels. A bottom channel attaches to the brackets to capture and reinforce the glass panels. Recommended bracket spacing is 4 feet. Equipment fabricators may order components individually. 1/ 24" Height Shelf Supports 1" 135 Specify Dimension Adjustable Slope Opening for 12-1/ Panel 135 14-1/4" 1 Tempered Glass Panel 370 Left 372 Center 371 Right 13" Clearance at 45 Slope 14" 4

Sneeze Guards HOSPITALITY FIXTURES 135 13" Width All Sneeze Guards have factory mounted or recessed channels that accept 1/4 inch tempered glass. Lido-Tone custom powder coat colors The Model 885 features a single, front mounted glass shield, and an optional pendant-mounted fluorescent light when illumination is required. The decorative lamp shield is available in polished brass or stainless steel to match sneeze guard. Recommended post spacing is 4 feet. 13" Height Certain serving conditions require a self-service area clear of posts. Our Model 887 posts mount toward the rear of the counter top leaving the front area unobstructed. Recommended post spacing is 3 feet. 887/L Left Post 887/C Center Post 887/R Right Post Standard dimensions shown may be altered to meet local health code requirements. Please check with local code authorities prior to placing an order. 885/L Left Post 885/C Center Post 885/R Right Pos 885 Single Face Front Mount Sneeze Guard Sizes: 1-1/2 or 2 inch diameter tubing. Clear coated polished brass, stainless steel or Lido-Tone powder 887 45 Projection Sneeze Guard Size: 2 inch diameter tubing. Clear coated polished brass, stainless steel or Lido-Tone powder 14" Width 13" Height 5

HOSPITALITY FIXTURES Food Display Cases 888 Food Display Case Size: 1-1/2 inch diameter tubing. Clear coated polished brass, chrome plated or Lido-Tone powder Shown at right is Lido-Tone Sea Green 889 Enclosed Curved Faced Display Case Size: 2 inch diameter tubing. Clear coated polished brass, chrome plated or Lido-Tone powder All Sneeze Guards have factory mounted or recessed channels that accept 1/4 inch tempered glass. Model 888 food display case is complete with mounted channels for top serving shelf and end panels. Recommended post spacing is 3 feet. 888/L Left Post 882/C Center Post 888/R Right Post The Model 889 display case (below) adds a touch of design flair with a curved front glass panel and top shelf for serving. The recessed glass channels add an appealing look and are easy to keep clean. Recommended post spacing is 3 feet. 889/L 5/16" 889/C 7/16" 889/R 889/L Left Post 889/C Center Post 889/R Right Post 1-1/4" Please use one of the following prefixes for finish designation: 00 Brass 02 Clear Coat Brass 20 Lido-Tone 40 Stainless Steel, Polished 44 Stainless Steel, Satin Example: 02-888/L 1 Width 1 Height Glass End Panel Standard dimensions shown may be altered to meet local health code requirements. Please check with local code authorities prior to placing an order. 10" Width 1-1/4" 16" Height 16" Height 6

Tray Slides and Service Rails HOSPITALITY FIXTURES 40-360/1 3 and 4 Rail Tray Slide Bracket in Stainless Steel 40-A100 1" Dia. Stainless Steel Tubing 40-364/1 Radius End in Stainless Steel A service rail (below) is designed to protect the access area of the server. Lavi Industries Tray Slides provide both convenience and style to your buffet line. Recommended bracket spacing not to exceed 42 inches. 00-A100 1" Diameter Brass Tubing Service Rail Finishes Model No. Tubing Dia. Polished Brass Polished Chrome Polished Stainless Steel 866/1-1/2 1-1/ 866/2 868/1-1/2 1-1/ 868/2 867 1-5/16" 00-360/1 Tray Slide Bracket 14 17 3 /4" 17-3 /4" Field Cut to Length 00-364/1 Radius End 24 14 Tray Slides Sizes: 1 bracket projection. 1" diameter tubing. Standard Finishes: Polished brass or stainless steel. Please use one of the following prefixes for finish designation: 00 Brass 02 Clear Coat Brass 10 Chrome 20 Lido-Tone 40 Stainless Steel, Polished 44 Stainless Steel, Satin Example: 00-360/1 21 Model 00-866 Model 00-868 Model 10-867 Featuring under counter rail mount. 14 18" 16" Service Rails 16" 60 maximum 7

HOSPITALITY FIXTURES Prefabricated Booth Divider Posts Prefabricated Divider Post PR4 Series: Short Post 1 10" PR5 Series: Dome Post 16" 14" PR6 Series: Ball Post 16" 14" 1-1/ PR41/E 1-1/ PR41/L 1-1/ PR41/C End Post Corner Post Center Post Tee Post 1-1/ PR51/E PR52/E 1-1/ PR51/L PR52/L Our Divider Posts are designed to hold 1/4" thick panels of glass or other materials. All posts are furnished with either channel or glass clips for convenient and attractive attachment of panels to posts. Sizes: 1-1/2 and 2 inch diameter tubing. 1-1/ PR51/C PR52/C End Post Corner Post Center Post Tee Post 1-1/ PR61/E PR62/E 1-1/ PR61/L PR62/L Materials: Solid brass and stainless steel. Finishes: Clear coated polished brass, chrome plated, polished or satin stainless steel or Lido-Tone powder Options: Posts may be ordered to accommodate 3/8" panels. Please specify. Height of post can be customized to accommodate your panels. Recommended post spacing: 36" to 48". Lavi Industries also provides glass panels. Please contact the factory for information. 1-1/ PR61/C PR62/C 1-1/ PR41/T 1-1/ PR51/T PR52/T 1-1/ PR61/T PR62/T 8 End Post Corner Post Center Post Tee Post

PR7 Series: Square Post Prefabricated Booth Divider Posts HOSPITALITY FIXTURES 16" Model DIVGLS/F Glass Panel Floral patterned etched panel is shown with Ball Posts (PR62/E). 14" 1-1/ PR71/E PR72/E PR8 Series: 14" Glass Grip Post 16" 14" Etched Glass Panels offer a sense of elegance and privacy for your customers. Panels are 14" high to match the Dome, Square and Ball Posts. Consult your Lavi Representative for standard or custom sizes and designs. 1-1/ PR71/L PR72/L PR71/C PR72/C End Post Corner Post Center Post Tee Post PR82/E PR9 Series: 18" Glass Grip Post 18" Mounting Solutions 16" NEW ITEM 1-1/ PR71/T PR72/T End Post Corner Post Center Post Tee Post NEW ITEM PR92/E Model DIVGLS/H Glass Panel Tropical island theme etched panel is shown with Dome Posts (PR51/E). PR82/L PR92/L PR82/C PR92/C PR82/T PR92/T End Post Corner Post Center Post Tee Post 1-1/ Mounting Flanges 2-1/ Mounting Flanges 3" 3-1/ Sq. 3" 3-1/ 4" 4" Sq. Model DIVGLS/G Glass Panel Art deco bordered etched panel is shown with Square Posts (PR71/E). Custom designs, which may include logos, are available on a special order basis. Customers camera ready artwork is required. 2-1/ Etched Glass Panels 4" 3-1/4" 4" 510 590 511 591 530 590 531 591 Standard Optional Standard Optional 9

HOSPITALITY FIXTURES Stemware Racks Stemware Racks Size: 1-1/2 inch diameter tubing. Low maintenance clear coated polished brass, chrome plated or Lido-Tone powder Please use one of the following prefixes for finish designation: 00 Brass 02 Clear Coat Brass 10 Chrome 20 Lido-Tone 810 810/91 Stemware Rod (pr.) Item# L H 810/12 1 2 7 /8" 810/14 14" 2 7 /8" 810/16 16" 2 7 /8" 810/18 18" 2 7 /8" 810/21 21" 2 7 /8" Model 870 stemware rack will display your glassware in style. Units can be bar top mounted or suspended from ceilings in any length to meet varying storage requirements. Optional features include modular extension units, glass shelving and gallery rails. Recommended post spacing is 4 feet and depends on weight of glasses. Pre-assembled Stemware Rod Unit Item # L H 810/91 9 3 /4" 2 1 /4" Model 810/91 Pre-assembled Single Stemware Unit is uniquely designed for mounting under cabinets. Each one will store approximately 3 glasses. Unit can be mounted in continuous runs. 24" Standard Height 36"/48" Center to Center Dimension 12 inch 16 inch 18 inch 21 inch Typical Stemware Rack Section All stemware racks are standard with welded flanges. See page 9 for mounting flange options. 1-1/ Approximate Glass Centerline Width Storage / Pair of Rods 12 inch 3-4 16 inch 4-5 18 inch 5-6 21 inch 6-7 Notes: 36" unit contains 6 pairs of rods 48" unit contains 8 pairs of rods See chart below left for approximate glass storage for each set of rods. Center to Center Dimension Varies 10

Stemware Racks HOSPITALITY FIXTURES Size: 1-1/ diameter tubing. Dimensions: 21" wide x 36" long center to center. 30" high from center of tubing to counter top. Custom sizes can be specified. Low maintenance clear coated polished brass, chrome plated or Lido-Tone powder Model 872 LaRosa Stemware Rack has a built in wine display shelf that is accented by four ball finials and a gallery rail. This unit is easily mounted to counter or bar tops. Custom Designed Wine Bottle Racks Specify the quantity of bottles desired and overall space available and let our design staff create a unique unit for you. 1/8" x 1/ solid brass bar factory assembled to stemware rod. Mounting Holes Specify Length (48" Maximum per Unit) 810/12 = 1 810/14 = 14" 810/16 = 16" 810/18 = 18" 810/21 = 21" Stemware Racks and Bottle Racks 510/1H (Standard) 511/1H (Optional) Typical Stemware Rack Section Continuous under cabinet unit (above) is pre-assembled and ready to install. Up to 4 foot long lengths can be ordered. Various depth racks are available with stemware rods. Consult factory for additional information. 3" 3" 3" Narrow (cut) flanges or floor flanges may be substituted upon request. Standard Finish: Low maintenance, clear coated, polished brass. 11

HOSPITALITY FIXTURES Coat Racks and Podiums Coat Racks and Podiums Model 842 Standing Coat Rack Standard Size: Height: 7 overall Tubing: diameter Base: 1 diameter Weight: 35 lbs Custom sizes are available, consult your Lavi Industries Representative. Polished brass, clear coated polished brass, chrome plated or Lido-Tone powder Model 848 Standing Coat Rack Standard Size: Height: 68" overall Tubing: 2-3/4" dia. Base: 14" diameter Weight: 40 lbs Custom sizes are available, consult your Lavi Industries Representative. Gold, Satin Anodized or Lido-Tone powder Lido-Tone custom powder coat colors Portable Podium Standard Size: Height: 43" overall Tubing: diameter Base: 1 diameter Top: 15" high x 19" wide with wood grain top. Weight: 30 lbs. Polished brass, clear coated polished brass, chrome plated or Lido-Tone powder Please use one of the following prefixes for finish designation: 00 Brass 02 Clear Coat Brass 10 Chrome 20 Lido-Tone Model 4541 Directrac Podium Standard Size: Height: 41" overall Base: 23-1/ x 16-1/4" Custom sizes are available, consult your Lavi Industries Representative. Gold, Satin Anodized or Lido-Tone powder 12

Bellman s Carts HOSPITALITY FIXTURES Standard = 4 Long = 48" 76" Maximum Overall Height 24" Lavi Industries Bellman s Carts have a heavy duty, fully welded steel chasis with a solid brass tube upper structure. Finishes include Solid Brass, Chrome and Lido-Tone colors. A unique wrap around bumper has a removable/replaceable nonmarking insert. Wheel types include; 8" solid, gray non-marking (standard) and 8" full pnuematic tire (optional). Deck carpeting in an array of designer colors. 892 Mark V Classic arches and finials compliment the brass framework of this cart. Shown with 8" full pnuematic wheels and non-marking bumpers. (Shown above with optional rope restraints) Bellman s Carts 13

HOSPITALITY FIXTURES Closet Hardware Closet Hardware Hooks H822 Ceramic Hook Finish: Brass 505SET Finish: Brass/Chrome A106 Closet Rods Finishes: 1-5/16" dia. Polished Chrome, Polished Brass. 1-1/4" dia. -White. Available in 6 ft and 8 ft lengths. 2-3 4" 8152 Deco Bracket Finish: Brass/Chrome H824 Double Hook Finish: Brass 7 8" Now you can forget those sagging wooden hang rods, by using sturdy metal components from Lavi Industries. H826 Swivel Hook Finish: Brass 8154 Euro Bracket Finish: Brass/Chrome 8150 Shelf & Rod Bracket Finish: Brass/Chrome 14

Finishes and Specifications HOSPITALITY FIXTURES Materials: Lavi Industries is a manufacturer of premium materials for architectural interiors. Our products are designed to meet most building codes. Solid brass and stainless steel are our choice materials for quality and durability. We finish these metals in-house, to maintain rigid quality control. Warranty Our products carry a limited warranty against defects and failure. Please refer to our current Price List for warranty details. Ordering Information 1. Part Numbers and Finish Designation When ordering, please use finish prefix as specified in the Materials and Finishes chart below. Example: 02-880/L = Polished Brass Single Faced Left Post. 2. Drawings Our engineering department will be happy to assist you with your specification requirements. Drawings of our products are available as needed. We can generate CAD drawings for your specific job, please consult us for details. Lido-Tone Lido-Tone powder coating is highly durable, as well as decorative. This two coat finish combines the outstanding chemical and mechanical properties of epoxies with a wide variety of colors and surface textures. When an exterior application is specified, a polyester-based coating will be utilized. See Lido-Tone standard color chart below. Custom colors and finishes are available. Please consult with your Sales Executive. Materials and Finishes finish material prefix Mill Brass 01 Polished Brass 00 Solid Brass Polished Brass, Clear Coat 02 Satin Brass, Clear Coat 04 Mill Stainless Steel 41 Polished #7 Stainless Steel Stainless Steel, Alloy 304 40 Satin #4 Stainless Steel 44 Solid Brass (Fittings) 10 Polished Chrome Solid Brass (Tubing) 12 Carbon Steel (Tubing) 10 Solid Brass 06 Lido-Tone Carbon Steel 26 Aluminum, Alloy 6061 56 Bright Anodized Aluminum, Alloy 6063 50 Lido-Tone Textured Finishes Lido-Tone Wet-Look Finishes Metal Finishes maintenance Not Applicable. Lido-Lustre,or other brass polish. Wrinkle Black Torch Red Blue Polished Brass Damp rag, avoid ammonia base cleaners. Not Applicable. Maintenance free or Lido-Lustre. Maintenance free. Damp rag, avoid ammonia base cleaners. Wrinkle Charcoal Wet Black Hunter Green Satin Stainless Steel Verdi Gris Statuary Bronze Sandstone Polished Chrome Pacific Sand Utility Gray Silver Matte Satin Brass LB-00201 Lido-Weld Metal Contact Cement Our line of flush fittings is designed to work with Lido-Weld, as they feature a 1" long sleeve for greater adhesive coverage. Wheel White Sea Green Polished Stainless Steel LB-00202 Lido-Lustre Metal Polish Cream should be used to repolish uncoated brass, aluminum and stainless steel. Available in 6.33 oz. tubes and 16 oz. jars. 15

Lavi Industries Corporate Headquarters 27810 AVENUE HOPKINS VALENCIA, CA 91355 800.624.6225 661.257.7800 661.257.4938 FAX WWW.LAVI.COM SALES@LAVI.COM EMAIL Lavi Industries - New York 2 GENEVA ROAD BREWSTER, NY 10509 877.213.LAVI (877.213.5284) 845.278.1766 845.278.1765 FAX SALES AND CUSTOMER SERVICE, USA : (877) 275-5284 INTERNATIONAL SALES : 001-661-257-7800 www.lavi.com SALES@LAVI.COM EMAIL 2002 Lavi Industries. Products for the People and the Places They Go, Lido-Tone, Lido-Lustre, Directrac and GlassGrip are registered trademarks of Lavi Industries. All other trademarks and trade names are the property of their respective owners. All product designs Lavi Industries. No part of this brochure may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission from Lavi Industries. Note: Lavi Industries has a policy of continuous development and improvement to our product line. Specifications, data and dimensions may change without notice. When these specifications or colors are critical, consult factory for current information. 12-02-10000