Georg Fischer Waga N.V. A BIG welcome MULTI/JOINT 3000 Plus 40 -
The original just got BIGGER and BETTER! The well-known and trusted wide range MULTI/JOINT 3000 Plus system has now been extended with the sizes 40. You can now benefit from the advantages of the patented MULTI/JOINT 3000 Plus system in the bigger diameters as well. An advanced solution, that fully meets the market demands, to replace traditional connection techniques. Bigger and better! Superb user-friendliness The MULTI/JOINT 3000 Plus 40 - fittings have an angularity of ± per socket-end at maximum end load resistance. For a coupling this means a total of maximum angularity. This angularity is unique in the marketplace and offers the installers superb user friendliness. Restraint at high pressure for your peace of mind The MULTI/JOINT 3000 Plus 40 - fittings are suitable for applications in water up to bar and gas up to bar. The non- versions are suitable for applications in water up to bar and gas up to bar. Easy installation The MULTI/JOINT 3000 Plus 40 - fittings are easy to handle on site thanks to the lifting eye. The patented design of the 40 Uni/Fiks ring, which attaches the ring to the body by means of clips, simplifies the installation. The fitting slides over the pipe without any interference. In other words: there is no need for disassembly.
Your benefits Saving time and costs, no thrust blocks needed Corrosion proof thanks to a Resicoat epoxy powder coated cast iron body and clamp ring Easy to install thanks to the design, which enables sliding over the pipe and angularity (max. per socket end, max. per coupling) reversible bolts for quick and easy installation Easy to handle thanks to the lifting eye Hygiene protection Moreover, the MULTI/JOINT 3000 Plus fittings 40 - are supplied with hygiene protection. Thanks to this protection the fittings remain free of dust and dirt until the time of use. Tested and approved The MULTI/JOINT 3000 Plus fittings 40 - are, just as the full MULTI/JOINT system, intensively tested. Certification according to EN 142 is pending. All MULTI/JOINT 3000 Plus fittings are supplied with a certified Resicoat epoxy powder coating, which provides an excellent protection against corrosion. + Durable and reliable large diameter fittings for a quick, safe and simple repair solution
MULTI/JOINT The original! Perfection in every detail Clamp ring: ductile cast iron GGG4 EN-GJS-40- with Resicoat epoxy powder coating type RT 9000 R4 Uni/Fiks ring Uni/Fikser: stainless steel A4 Varioseal: rubber gasket (EPDM or NBR) (AISI 3) Body: ductile cast iron GGG4 EN-GJS-40- with Resicoat epoxy powder coating type RT 9000 R4 Washer: stainless steel A2 (AISI 304) or stainless steel A4 (AISI 3) Nuts: stainless steel A2 (AISI 304) galvanised and passivated or stainless steel A4 (AISI 3) galvanised and passivated Bolts: stainless steel A2 (AISI 304) PTFE coated or stainless steel A4 (AISI 3) PTFE coated
Product overview MULTI/JOINT 3000 Plus, coupling, non, up to angular deflection 40 00 0 40-42 00-32 4-0 60-637 709 301 272 709 301 274 709 301 276 709 301 27 709 301 672 709 301 674 709 301 676 709 301 67 709 301 072 709 301 074 709 301 076 709 301 07 709 301 372 709 301 374 709 301 376 709 301 37 MULTI/JOINT 3007 Plus, coupling,, up to angular deflection 40 00 0 40-42 00-32 4-0 60-637 709 30 272 709 30 274 709 30 276 709 30 27 709 30 672 709 30 674 709 30 676 709 30 67 709 30 072 709 30 074 709 30 076 709 30 07 709 30 372 709 30 374 709 30 376 709 30 37 MULTI/JOINT 30 Plus, reduced coupling, non, up to angular deflection - 40-400 00-40 0-00 40-42 00-32 4-0 392-433 40-42 00-32 709 401 292 709 401 294 709 401 296 709 401 692 709 401 694 709 401 696 709 401 092 709 401 094 709 401 096 709 401 392 709 401 394 709 401 396 MULTI/JOINT 37 Plus, reduced coupling,, up to angular deflection - 40-400 00-40 0-00 40-42 00-32 4-0 392-433 40-42 00-32 709 40 292 709 40 294 709 40 296 709 40 692 709 40 694 709 40 696 709 40 092 709 40 094 709 40 096 709 40 392 709 40 394 709 40 396 MULTI/JOINT 300 Plus, flange adaptor, non, up to angular deflection 00 00-32 60-637 00 Drilling pattern PN/PN PN/PN 709 31 274 709 31 27 709 31 674 709 31 67 709 31 074 709 31 07 709 31 374 709 31 37 MULTI/JOINT 307 Plus, flange adaptor,, up to angular deflection 00 00-32 60-637 00 Drilling pattern PN/PN PN/PN 709 3 274 709 3 27 709 3 674 709 3 67 709 3 074 709 3 07 709 3 374 709 3 37 MULTI/JOINT 310 Plus, reduced flange adaptor, non, up to angular deflection 40-400 0-00 40-42 4-0 400 00 Drilling pattern PN/PN PN/PN 709 41 292 709 31 276 709 41 692 709 31 676 709 41 092 709 31 076 709 41 392 709 31 376 MULTI/JOINT 317 Plus, reduced flange adaptor,, up to angular deflection 40-400 0-00 40-42 4-0 400 00 Drilling pattern PN/PN PN/PN 709 4 292 709 3 276 709 4 692 709 3 676 709 4 092 709 3 076 709 4 392 709 3 376
The complete system Model Type Dimensions Coupling Reduced coupling adaptor Reduced flange adaptor End cap blind End cap ¾" - 2" threaded PE adaptor non non non non non non 3007 3000 37 30 307 300 317 310 3207 blind 3200 blind 3207 threaded 3200 threaded 3067 0-0 - 0-00 0-00 0-0 - 40-00 40-00 0-400 0-400 0-400 0-400 0-300 46-637 46-637 46-0 46-0 46-637 46-637 46-0 46-0 46-433 46-433 46-433 46-433 46-36 Spigot end Reduced spigot end Duckfoot Reduced duckfoot Bend non non non non non 307 300 317 310 347 340 37 30 3407 3400 0-200 0-200 0 0 0 0 0-10 0-10 0-10 0-10 46-232 46-232 4-4 - 4-4 - 46-192 46-192 4-192 4-192 + The complete solution for all your connection, maintenance and repair applications
Technical specifications Specifications Body Clamp ring Coating Varioseal rubber gasket Uni/Fiks and Uni/Fleks ring Uni/Fiksers Bolts and nuts Washers Working temperature Working pressure (PFA)* Certificates Ductile cast iron GGG4 in accordance with EN-GJS-40-. Ductile cast iron GGG4 in accordance with EN-GJS-40-. Resicoat epoxy powder coating, type RT 9000 R4, meets the requirements of for example ACS, Belgaqua, KTW, NSF Standard 61, WRAS, KIWA. Colour red (RAL 3003). Minimum layer thickness 20 micron, in accordance with the GSK-register. Potable water: EPDM in accordance with EN 61-1. Water and gas: NBR in accordance with EN 62. POM (polyoxymethylene) and/or glass fibre filled Polyamide. Stainless steel A4 (AISI 3). Stainless steel A2 (AISI 304) or stainless steel A4 (AISI 3). Bolts are PTFE coated, nuts are galvanised and passivated to prevent galling. Stainless steel A2 (AISI 304) or stainless steel A4 (AISI 3). Drilling pattern PN / PN in accordance with EN 92-2. - C to +0 C. Non : up to PFA bar water and up to bar gas. Restraint: up to PFA bar water and up to bar gas. * For details see user manual or contact your supplier. ACS, Belgaqua, WRc, ÖVGW, SVGW, DVGW, WRAS, NSF and KIWA. EN 142: ÖVGW, SVGW and KIWA (pending). Sealing system Suitable for all pipe materials AC PE PVC Steel Grey cast iron (Ductile) cast iron Nominal angularity* Insert stiffener max. ± In case of connecting PE or PVC pipes, install an insert stiffener. * based on the middle of the range
Georg Fischer Waga N.V. Contact information P.O. Box 290 0 AG EPE The Netherlands T +31 7 6737 F +31 7 6204 waga.ps@georgfischer.com www.waga.nl The technical data are not binding and not expressly warranted characteristics of the goods. They are subject to change. Please consult our General Conditions of Supply. 1/EN Georg Fischer Waga N.V. 201, printed in the Netherlands