Fully Lined Bellows Sealed Control Valves Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty Paraflon bellows Special designs for chlorine and high-purity media ASSOCIATE CHLORINE INSTITUTE MEMBERS RSS Series AEGIS RSS Series
RSS Aegis RSS Series Bellows-Sealed Globe Control Valves Fields of application Flow control of corrosive, hazardous and ultrapure process fluids and gases. The Aegis RSS Series is especially suitable: for media where stainless steel and exotic alloys do not provide sufficient corrosion resistance as an economic alternative to exotic alloy valves for environmentally critical media - German Clean Air Act TA-Luft for metal-reactive media, e.g. H 2 O 2 for biotechnology and high-purity media where excellent cleaning and anti-adhesive surfaces are important for highly permeating media Operating range -60 to +200 C (-75 to 400 F) operating temperature 0. mbar vacuum up to 6 bar (25 psi) operating pressure Design PFA Lined Bellows-sealed globe valve with a secondary packing system in compliance with German Clean Air Act - TA-Luft. Pneumatic or electric actuation. Also available as manually operated, control or shut-off valves (HVR, HV series). Control characteristics in accordance with DIN EN 6054 Equal percentage or linear Rangeability :25 Bubble tight shut off - EN 2266- Class A V-control plug: Cv 0.02-.40 Rangeability :00 Applicable Standards Face-to-face to ISO 5752-R. (DIN EN 558- R.), flanges ISO 7005-2/PN 6, on request drilled to ASME 50# Face-to-face to ANSI/ISA 75.08.0 Cl. 50, flanges ASME B6.5 Cl. 50 RF Face-to-face to ANSI/ISA 75.08.0 Cl. 00 for DN to 2, flanges ASME B6.5 Cl. 00 RF a Heavy Duty PFA Lining Optional PFA-L antistatic Lining thickness: 5-6mm (0.2-0. ) /2 + /4 Valve sizes:.5-4 mm (0.4-0.6 ) b High Security One-Piece Valve Body as well as all other pressure- bearing components Made of cast ductile iron EN-JS 049 (ASTM A95), Option:.069 (GS-C 25) Absorbs system pressure and pipe forces Top entry = simple maintenance of bellows, plug and seat Body heating jackets available c PTFE Bellows hermetically seals the product chamber from the atmosphere and protects the valve stem against corrosion Heavy-duty Paraflon and Hastelloy bellows For critical applications where extreme permeation and pressure/temperature conditions exist such as chlorine, chlorinated organics and hydrochloric acid d Secondary Packing System adjustable from outside as a standard feature e Optional Leak Detection Port for hazardous applications f Exchangeable valve plug Standard material (Paraflon ) Screwed to bellows and secured by means of PTFE locking cord Change in Cv value by replacing seat/ plug Special V-control plug made of Paraflon for minimum Cv-values Special U-plug if there is a risk of cavitation 2
0 g Exchangeable seat made of Paraflon 9 4 h Easy top entry maintenance of the wetted internals with an easily removable valve bonnet 8 5 High-quality external corrosion protection: Epoxy coating of the valve; valve stem and fasteners made of stainless steel, Alloy 20 or Hastelloy C276 6 2 i Actuators and accessories Pneumatic or electric actuators Positioners, limit switches, etc. j Travel stop protects plug and seat against excessively high shut-off forces Comes standard with protective rubber bellows 7 Heavy-duty Paraflon Bellows Developed specifically for hazardous service process liquids and gases: Highly permeating media: The wall thickness of 2.5 mm (0. ) ensures superior resistance to permeation. on the valve stem!) and remain flexible. On request, support rings are also available in PTFE/carbon for an operating pressure of 0 bar (45 psi). Higher pressures and temperatures: The convolutions of the bellows retain their function even at a pressure of 6 bar (25 psi) and at elevated temperatures. They are internally supported on the stainless steel support rings (not For high-purity media: Large convolution distances facilitate flushing/sterilization of the inner valve chamber (see also page 5 Version for biotechnology/high-purity media ). support ring heavy-duty bellows plug
RSS Cavitation Prone Applications This special U-plug (U = circumfer ential guiding) is recommended, when cavitation might occur with, 4 and 6 RSS Valves. It reliably over comes the higher loads by di vi ding the medium flow and through the permanent guide in the valve seat. Universal for all RSS bellows versions. seat U-plug guide RSS V-plug - Highly Controllable, Low Flow Applications The V-plug made of compressionproof and dimensionally stable Paraflon, has to 4 grooves, de pen d ing on the Cv value. When the valve opens, the V-grooves offer an expanding opening cross section while the plug is always guided in the seat. This ensures high-quality control even at elevated temper a tures and differential pressures. A dynamic sealing lip integrated into the seat limits the flow precise ly to the V-grooves, thus prevent ing undesired leakage. A PTFE locking cord prevents the plug from unscrewing. Customer benefits: Lower costs than exotic alloys, shorter delivery times, metal-free, maximum chemical resistance. The V-plugs are the preferred version for /2 - RSS valves that require a low Cv value. Operating range Up to 25 psi at 60 F Pressure/temperature diagram: see page 6 Not for highly viscous or solids-containing media V-groove k vs00 -values (m /h), Cv-values (US GPM) /2 - /4 : seat Ø 8 mm. Travel 5 or 20 mm. : seat Ø 4 mm. Travel 5 or 20 mm. k v00 0.0 0.02 0.05 0.0 0.20 0.50 0.80.20* Cv 0.02 0.02 0.06 0.2 0.2 0.58 0.9.40* Sealing lip Other sizes and k v /Cv-values on request. * only DN 25 ( ) Control characteristics Quadratic curve, rangeability :00 Travel (%) 5 0 20 0 40 50 60 70 80 90 00 Flow rate (%).25 2 5 0 7 26 7 50 64 8 00 Components and material 204 Plug Paraflon 205 Seat Paraflon 522 Cord PTFE 522 204 205 4
Version for highly permeating media (e.g. chlorine) a The special bushing material e.g. Hastelloy C protects the cover flange in the valve stem area against corrosive attack by permeating media. The valve stem, also Hastelloy C, remains moveable. Bellows: Paraflon heavy-duty bellows with PTFE/carbon or Hastelloy C support rings or bellows made of Hastelloy C b The thick-walled seamless PFA body lining provides outstanding protection against permeation. Version for biotechnology/ pure media Pharmaceutical, fine and semiconductor chemicals, fermentation etc., suitable for CIP and SIP! Our industry proven design features: Cavity free profile. Anti-adhesive PFA body lining without fillers with seamlessly integrated seat. One-piece PTFE bellows/plug design a with large convolution distances, easy to clean b. /2 + /4 with standard bellows. On request, special high-purity media production process and FDA conformity certificate. Design for combustible and potentially explosive media The antistatic lining made of PFA-L reliably ensures the dissipation of electrostatic charges through the plastic lining and the metallic body. PFA-L has the same large pressure/ temperature range as virgin PFA. Its chemical resistance is excellent however it must be specifically verified for each application due to the % carbon enriched PFA. 2 5
RSS 6 Pressure/Temperature Range Vacuum (mbar) Gauge pressure (bar) Temperature ( F) -75 +5 70 20 20 00 60 6 25 5 Hastelloybellows 220 4 205 90 2 Heavy-duty Paraflon bellows 75 w/ stainless steel support rings 60 0 45 9 0 8 Standard PTFE bellows 5 7 6 5 4 200 00 50 0 20 0 5 2-60 -0 20 50 00 50 80 Temperature ( C) Bill of Materials Heavy-duty Paraflon bellows w/ PTFE/carbon support rings All bellows Item Designation Material 00 Body Shell: ductile iron EN-JS 049/ ASTM A95, optionally cast steel GS-C 25 (.069) Lining: PFA, optionally PFA-L antistatic 06 Cover D.c.i. EN-JS 049/ASTM A95 204 Plug Paraflon 205 Seat Paraflon 206 Bellows Paraflon, PTFE, PTFE/carbon antistatic, Hastelloy. Heavy-duty version: with stainless steel or PTFE/carbon support rings 02/x Guide ring PTFE/carbon 402/ Packing ring PTFE/carbon 404 Packing Stainless steel nut 405 Thrust ring Stainless steel 508 Travel stop* Stainless steel 50 Bracket Steel, epoxy-coated 56 Yoke Ductile cast iron, epoxy-coated 522 Round cord PTFE 52 Travel indicator Stainless steel 687 Protect. bellows Rubber, w/travel stop 800 Valve stem 6SS 80 Guide** 6SS (, 4, 6 only) 804 Coupling Stainless steel 850 Actuator according to specification 97/ Screw-in pipe Stainless steel, optionally connector*** hex. head screw plug * depending on shut-off force ** Component not shown *** option. with safety stuffing box Dimensions and weights Face-to-face lengths ISO 5752 series (DIN EN 588- series )*, flanges ISO 7005-2/PN6 (DIN EN 092-2)* Size H L Weight** (Inch) (Inch) (Inch) (Lb) /2 5. 5. /4 5. 5. 7.28 6.0 24 -/2 8.85 7.87 5 2 9.05 9.05 42 2-/2 9.05.4 44.8 2.20 86 4.78.78 97 6 20.5 8.89 4 * formerly DIN 202/F, 252/ ** without actuator 00 85 75 60.0.5 0.7 0.4 0. 0.5 0.07 0.04 0.0 0.02 Gauge pressure (psig) Vacuum (psia) Face-to-face lengths ANSI/ISA 75.08.0 Class 50# and 00# flanges ASME B6.5 Class 50# and 00# Raised face Size H L L Weight** (Inch) (Inch) 50# (Inch) 00# (Inch) (Lb) /2 * 5. 5.** - /4 5. 5.*** - 7.28 7.24 7.75 26 /2 8.85 8.74 9.25 5 2 9.05 0.00 0.5 42.8.7-86 4.77.89-97 6 20.5 8.89*** - 4 * DN /2 : flanges with tapped bore ** without actuator *** not to ANSI/ISA Bellows Travel Range Size Standard Heavy Duty (Inch) (Inch) (Inch) /2 *.590 /.787 - /4.590 /.787 - -.590 /2 -.590 /.787 2 -.590 /.787 -.8 4 -.8 6 -.968 850 52 804 50 508 687 404 405 402/ 02/ 56 06 02/2 800 206 00 522 204 205
Flow rates k v00 (m /h), Cv (US gpm) DN Seat-Ø mm (inch) DIN/ISO ANSI kv00/ 45 20 20 96 80 65 50 40 0 25 20 5 8 DN 5+20 ( /2 + /4 ): Seat ø 8 mm (0. ) (mm) (inch) Cv (5.7) (4.7) (4.7) (.8) (.) (2.6) (2) (.6) (.2) () (0.8) (0.6) (0.) DN 25 ( ): Seat ø 4 mm (0.55 ) 5+20 /2 + kv00 4 2 0.80 0.50 0.20 0.0 0.05 0.02 0.0 /4 Cv 4.7 2. 0.9 0.58 0.2 0.2 0.06 0.02 0.02 25 kv00 7 4 2.20 0.80 0.50 0.20 0.0 0.05 0.02 0.0 Cv 2.8 8.2 4.7 2..40 0.9 0.58 0.2 0.2 0.06 0.02 0.02 40 /2 kv00 28 5 7 4 Cv 2.6 7.5 2.8 8.2 4.7 50+65 2 kv00 42 28 5 7 Cv 48.9 2.6 7.5 2.8 8.2 80 kv00 00* 65 42 28 5 Cv 7* 75.7 48.9 2.6 7.5 00 4 kv00 55* 00* 65 42 Cv 80* 7* 75.7 48.9 50 6 kv00 60 00 240 Cv 420 50 280 * If a U-plug is used, the k v00 (Cv) values reduce from 55 m /h (80 US gpm) to 5 m /h (57 US gpm) and from 00 m /h (7 US gpm) to 90 m /h (05 US gpm). Remarks:. V-control plugs are used for the k v00 values 0.0 to.2 (Cv 0.02 to.4), 2. The next lower k v00 (Cv) value can also be attained by using a different plug without changing the seat diameter. This may be important as it is only necessary to replace the plug if the k v00 (Cv) value is later changed.. Conversion k v00 to Cv (US gpm) = k v00 x.65. Required Shut-off forces (N) with seat and plug made of Paraflon Max. p bar/psi, valve in closed position Standard PTFE bellows (max. oper. pressure 0 bar/45 psi) Heavy-duty Paraflon bellows (max. oper. press. 6 bar/22 psi)** Hastelloy C-bellows (max. oper. pressure 6 bar/22 psi) DN 5+20, /2 + /4 DN 25, DN 40, /2 DN 50 + 65, 2 + 2 /2 DN 80, DN 00, 4 DN 50, 6 Seatø mm (inch) 8 (0.2) 4+5 (0.55+0.6) 20 (0.8) 25 (.0) 0 (.2) 40 (.6) 50 (2.0) 65 (2.6) 80 (.) 96 (.8) 20 (4.7) 45 (5.7) Mechanical travel stop (see shaded cells) has to be provided if p > 0 bar/45 psi and seat Ø 4-50 mm (0.55-2 ) p > 6 bar/ 87 psi and seat Ø 65 mm ( 2,6 ) bar/ psi / 2/ / 4/ 5/ 6/ 7/ 8/ 9/ 0/ / 2/ / 4/ 5/ 6/ 4.5 29 4.5 58 72.5 87 02 6 45 60 74 89 20 28 22 290 0 0 50 70 90 40 40 450 470 495 50 525 540 555 570 0 85 45 490 540 595 645 695 750 800 865 900 95 970 005 040 90 460 525 595 665 70 800 865 95 00 45 95 250 00 55 40 450 545 640 75 80 925 020 5 205 05 475 550 625 705 780 855 550 680 805 95 065 90 20 445 575 705 890 990 2095 295 2295 2400 680 885 085 290 490 695 895 2095 200 2480 2750 295 080 250 45 570 80 0 425 720 2020 25 260 290 205 500 790 405 4280 4525 4770 5020 040 500 960 2420 2890 50 80 4270 4740 590 5675 6070 6465 6860 7255 7650 00 970 260 00 960 460 500 5960 660 705 7945 8525 905 9685 0265 0850 600 2520 440 470 5290 620 70 8050 8980 9900 0790 60 2425 240 4060 4880 275 70 5022 679 769 9025 07 672 029 46 5675 6829 8084 97 20527 705 468 546 72 9 229 77 542 704 902 20972 22887 2457 26404 28204 2997 705 Attention: If p < p2, then insert p2 instead of p (see operating limits in pressure/ temperature diagram). * Plugs and seats made of other materials sometimes require higher shut-off forces. Details on request. ** - available for -4. Heavy-duty Paraflon bellows with PTFE/carbon support rings: max. operating pressure 0 bar/45 psi. - with.6 travel. In the case of actuators with a larger travel, the required control curve is achieved by means of positioners. - Valve opening travel requires higher forces than with standard PTFE bellows: = 900 N; /2, 2, 2 /2 = 2000 N;, 4 = 800 N, 6 = 2400 N Please consider this when sizing the actuator. 7
RSS ) Type Lined PFA Globe Control Valve 2) Valve size /2", /4", ",,5", 2", ", 4", 6" ) Pressure Class ASME Class 50* ASME Class 00 4) Bolting material 2 A F B S T 5 G 7 X A B Stainless steel A4-70 (AISI 6)* Carbon steel B7M 2 Alloy 20 5) Lining PFA* PFA - Antistatic PFA - High Purity 6) Bellows Standard Duty PTFE - 50psi max (/2" - /4" only) Paraflon with 6SS support rings - 20psi max* Paraflon with Hastelloy C support rings - 20psi max Paraflon /TFM 6220 antistatic/ss support rings - 20psi max 7) Valve stem 6SS* Hastelloy C4 2 8) Seat / Plug Paraflon * Hastelloy C4 9) Kv-Value See table for proper match up 0) Control characteristics Linear Equal percentage* ) Actuation Bare shaft (w/o coupling & bracket) 6 Prepared for actuator (incl. coupling & bracket) 7 With actuator & accessories 8 2) Special design Please specify the details *Denotes standard RSS Product Key F L H A E F G Sizing Information A B L G X In order to properly size RSS globe control valves, please provide the following information: Inlet Pressure Specific gravity Viscosity Outlet Pressure Process fluid Temperature Density Vapor Pressure Connection Size 8 Aegis Flow Technologies L.L.C. 604 Industrial Dr., Geismar, LA USA 7074 225-67-9990 www.aegisvalves.com Aegis and Paraflon are registered trademarks of Aegis Flow Technologies L.L.C. 8/4 A-0