REMCO Towing Training and Service for Lube Pump Systems
REMCO TOWING PRODUCTS PRESENTED BY Doak McDaniel
The REMCO lube pump is specially designed for transmission and lubrication fluids LUBE PUMP TOWING KIT For all your towing solutions
LUBE PUMP TOWING KIT Basic s and how it works Lube pump circulates transmission fluid through the vehicles transmission cooler to keep it cool and lubricated while the vehicle is being towed with the engine off. Cabin display monitors the system from inside the Motorcoach and shows you are safeguarding your transmission. Protected by fluid system selector valve with a pressure switch mounted in the towed vehicle. Not recommended for vehicles older than manufacturing year 2000. 100000+ kits out in the field. Most popular in automatic transmissions. Contact your CWI service department to schedule an appointment for installation. Lube pump system, tail lights, brake lights and turn signals are powered by the Motorcoach 12VDC electrical system. Detailed installation instructions with every kit. Average install time is 6-7 hours.
Flow Chart of a Lube Pump System installed
LUBE PUMP TOWING KIT REMCO Installation Manuals Detailed installation instructions with every kit. Average install time is 6-7 hours for Lube pump kits. Troubleshooting tips are available in the back of each manual.
REMCO Sales-Service Training for RV Water Pumps
REMCO RV PRODUCTS PRESENTED BY Doak McDaniel
REMCO INDUSTRIES Committed to delivering professional grade pump solutions Every product is tested at the factory to ensure its meets our rigorous standards of quality and performance American Made a defining characteristic that speaks for itself REMCO has been servicing the Towing industry since 1978 Manufacturing of RV Water product s since the mid 1980 s
The #1 RV variable speed pump AQUAJET SERIES The Aquajet has variable speed, low noise, and steady performance
Made in the USA AQUAJET SERIES Variable speed allows smoother flow and eliminates pump surging Quietest operating pump on the market IAPMO, NSF certified Thermally protected motor Low voltage protection below 10VDC Pump fittings included plug and play Can be run dry without damage Pump specs and info 12VDC with lead wire and fuse AQUAJET-ARV - 5.3GPM max flow rate AQUAJET-AES 3.4GPM max flow rate Pressure range 65 PSI Just like home water supply The Cadillac of RV water pumps Factory tested for guaranteed quality 2 year extended warranty
AQUAJET SERIES Pump SKU#, Part # & Specifications REMCO SKU# 55AQUAJET-AES 3.4 GPM @ 65psi, Variable Speed, 12VDC, Lead Wire with fuse REMCO SKU# 55AQUAJET-ARV 5.3 GPM @ 65psi, Variable Speed, 12VDC, Lead wire with fuse AQUAJET fresh water pumps are for the Customers who demands the best quality Made in America fresh water pump for high end RV Coaches, Off grid Cabins and Park model homes available in the marketplace today. AQUAJET offers variable speed technology to support consistent water flow while running multiple water faucets, showers, toilets, dish washers and clothes washers at the same time. The pumps are supplied with 1/2 threaded quick connect fittings to make OEM pump replacement very simple. REMCO recommends the use of a inlet Filter/Strainer for this product sold separately. 2 year limited warranty with proof of purchase.
Top of the line RV water pump REBEL SERIES The REBEL: delivering a new level of pumping performance
REBEL SERIES Pump specs and info Made in the USA Flo IQ inside Eliminates pump cycling/pulsation Demand Switch with matched Bypass Quiet operation Factory tested for guaranteed quality 60 PSI Shut off Pump fittings included plug and play 12VDC Flow Rate 4.0GPM Highest quality on demand water pump Can be run dry without damage
REBEL SERIES Pump SKU#, Part # and Specifications REMCO SKU# 54REBEL-JRV, 4.0 GPM @ 60 psi, Demand/Bypass Controls, 12VDC with Lead wires and 15 amp fuse REBEL fresh water pumps are for the Customers who demand the best quality Made in America fresh water pump for RV Coaches, Off grid cabins and park model homes. REBEL offers increased water flows to support running multiple water faucets, showers and toilets at the same time. The pumps are supplied with 1/2 threaded quick connect fittings to make OEM pump replacement very simple. REMCO recommends the use of a inlet Filter/Strainer for this product sold separately. 1 Year limited warranty with proof of purchase
3200 SERIES Your direct OEM replacement Pump The 3200 is your new favorite automatic demand RV water pump
3200 SERIES Pump specs and info Direct Replacement for ShurFlo 2088 or 4008 On demand operation with bypass Quiet operation 10 AMPS max 45 PSI shut off Same mounting pattern base Fittings and Filter included 12VDC with lead wires 3.0 GPM Flow Rate Built-in Check valve Can run dry
3200 SERIES REMCO SKU# 3264-1C4-15A, 3 GPM @ 45 psi, Demand/Bypass, 12VDC with lead wires, complete with self sealing ½ hose fittings and 50 mesh filter that do not require thread tape or thread sealant. 1 Year limited warranty with proof of purchase. Pump SKU#, Part # and Specifications
RV Reverse Osmosis system Compact, field proven, multi-stage, NSF certified Standard 58
WATER MAKER 5 RWM5-50-RVS Made in the USA Unique five stage design utilizes water pressure more effectively resulting in 30% higher flow from faucet Water Maker 5 reduces waste water by 50% Easy to install with pre-connected, color coded tubing and hygienically sealed filter cartridges NSF Certified, Standard 58, for the 96.% reduction of Total Dissolved Solids (TDS), Lead, Fluoride, Arsenic V, and Cysts 50GPD Membrane refills storage tank quickly, giving you more water when you need it. CONTAMINANT REDUCTION (TDS) 96.5% ARSENIC V 97.8% CYSTS 99.9% FLURIDE 96.3% LEAD 98 % FEED WATER REQUIRMENTS 40-80PSI this range fits majority of RV water pumps 40-100F Max Temp Minimum flow rate 1GPM
WATER MAKER 5 RWM5-50-RVS REMCO SKU# RWM5-50-RVS, complete with everything needed to install under cabinet with quick connect fittings and faucet components. REMCO SKU# 104592 4 Stage-50 gallon per day replacement filter cartridge REMCO SKU# 104803 5 th Stage GAC flavor replacement filter cartridge
REMCO FAQ s Pump continues to run after faucets are turned off, 1. Check all pump inlet fittings all the way back to the water tank are tight any air will cause this. 2. Be sure all the air is out of the outlet side of the system, turn on pump open all faucets, shower, toilet, out door faucets and showers and let them run for a few minutes and turn them off from the farthest faucet to the nearest. 3. Check the water selection valve for leaks and make sure seals are tight and properly sealing. 4. If you have a accumulator tank remove it or bypass it, an accumulator tank will cause AQUAJET and REBEL pumps to continue to run. Pump surges on and off (Cycling), 1. Check all outlet lines looking for a small leak. 2. Turn more than one faucet on and if the cycling stops it means there is to much restriction in the system. Increase the size of the restrictors in all the faucets aerators and shower heads to reduce back pressure. Use a smaller size pump. 3. If you have a accumulator tank remove it or bypass it, an accumulator tank will cause AQUAJET and REBEL pumps to cycle. Pump does not run at all, 1. Check all electrical connections from the fuse box all the way to the pump including wiring on demand switches. 2. Check all fuses are in place and not blown. Pump is extremely noisy, 1. Be sure that you have not tightened the pump down on the mounting base to much, you should have a gap between the pump base and the mounting surface. Loosen fasteners to allow the pump to move on its rubber feet. 2. Install 12-18 long rubber hoses between the hard plumbing pipes and the pump inlet and outlet, this will keep the hard plumbing from rattling. Looking for RV plumbing? Visit our website.