PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD

PRODUCT GUIDE AS/NZS ISO 9001:2000 A DIVISION OF ALLIANCE CASTING & ENGINEERING SOLUTIONS PTY LTD www.briggsmarine.com.au

Briggs Marine Products are manufactured in Australia from specified copper base alloys and aluminium alloys for the boating industry. Components are produced by craftsmen in a complete metal casting and engineering complex; metallurgical supervision, electric induction melting of alloys and sand treatment control ensures quality castings - a basic requirement of an Alliance Casting production. Quality control is maintained throughout the whole manufacturing process, batch tests and testing of polishing and plating gives built-in strength and reliability essential to components used under marine conditions. Our quality system is in accordance with AS/NZS ISO 9001:2000 and has been accredited by SAI Global. Our certificate number is QEC 6493. When quality and reliability is required - ask for a BRIGGS PRODUCT Designed by Digital Exposure VOL07 www.digitalexposure.com.au

PRODUCT INDEX BOLLARDS, CLEATS & LIGHTS BOW ROLLERS, CHOCKS & FAIRLEADS HINGES, LATCHES & LETTERS/NUMBERS PORT HOLES & ADJUSTERS RIGGING DECK PLATES & RAIL FITTINGS HANDLES, EXHAUST OUTLETS & GUNWALE CAPS VENTILATION CONTROLS, ROWLOCKS & SPURLING PIPES STRAINERS, SCOOPS & PIPE FITTINGS GUDGEONS & BELLS ORDER FORM 4 5 6 7 8 9 10 11 12 13 14 15 ALL PARTS AVAILABLE IN POLISHED BRONZE, CHROME OR ALUMINIUM CUSTOM MADE EQUIPMENT AVAILABLE ON REQUEST BRIGGS MARINE A DIVISION OF ALLIANCE CASTING PTY LTD 51-53 Lathams Road CARRUM DOWNS, VIC 3201 TEL: 03 8773 4302 FAX: 03 8773 4370 www.briggsmarine.com.au PAGE 3

BOLLARDS, CLEATS & LIGHTS NEGRO BOLLARDS - STRAIGHT B20 2 (51mm) x 7 5/8 (194mm) Base 3 3/4 (95mm) Between Centres B21 3 (76mm) x 9 1/8 (232mm) Base 4 1/4 (108mm) Between Centres NEGRO BOLLARDS - ANGLED B489 4 (102mm) x 1 1/2 (38mm) Base B490 5 (127mm) x 1 7/8 (47mm) Base B491 6 1/4 (158mm) x 2 1/2 (64mm) Base B492 8 1/4 (209mm) x 3 1/4 (83mm) Base CROSS BOLLARDS DECK CLEATS - Heavy Duty B355 B356 B347 B348 6 (152mm) Length 8 (203mm) 10 (254mm) 12 (305mm) HORN CLEATS B37 B38 B39 B40 B41 B42 3 (76mm) Overall Length 4 (102mm) 5 (127mm) 6 (152mm) 8 (203mm) 10 (254mm) CROSS BOLLARD - Straight B16A 2 (51mm) x 2 (51mm) x 3 (76mm) High B17 2 1/2 (64mm) x 2 1/4 (57mm) x 3 3/8 (86mm) High B17A 2 7/8 (72mm) x 2 7/8 (72mm) x 4 (102 mm) High B18 3 (76mm) x 4 (102mm) x 4 3/4 (121mm) High B19 4 3/4 (121mm) x 4 3/4 (121mm) x 5 1/2 (140mm) CROSS BOLLARD - Angled B368 3 3/8 (86mm) Long x 2 3/4 (70mm) High BOLLARD - SQUARE B473 4 (102mm) x 4 (102mm) Base 3 5/8 (92mm) High 2 1/4 (57mm) Square Top HERASHOFF CLEATS HORN CLEATS - Heavy Duty B359 4 (102mm) Overall Length B360 5 (127mm) B361 6 (152mm) B362 8 (203mm) B363 10 (254mm) HORN CLEATS - Open Type B44 8 1/2 (216mm) Overall Length HORN CLEATS - Low Profile B43 5 (127mm) Overall Length B61 10 (254mm) Overall Length BULKHEAD LIGHT B60 B61 8 (203mm) Overall Length 10 (254mm) Overall Length TORPEDO CLEATS B45 3 (76mm) Overall Length B46 4 (102mm) B47 5 (127mm) DECK CLEATS - Square Base B34 4 (102mm) B35 5 (127mm) B36 6 (152mm) DECK CLEATS B357 3 3/4 (95mm) Length B358 5 1/4 (133mm) PAGE 4 MAST LIGHT B196-360⁰ Display - White A range of lighting available on request B203-3 3/4 (89mm) Lens 4 5/8 (118mm) Diameter Inside / outside application

BOW ROLLERS - Side Fit- BOW ROLLERS, CHOCKS & FAIRLEADS STERN CHOCKS B263 2 (51mm) Roller x 9 (229mm) Long B264 3 (76mm) x 16 (406mm) BOW ROLLERS - Front Fitting B28 B29 B30 3 (76mm) 4 (102mm) 5 (127mm) B31 B32 B33 6 (152mm) 8 (203mm) 10 (254mm) B261 Wide Base with Holding Pin 5 (127mm) long x 3 (76mm) high BOW CHOCKS B27 2 3/8 (60mm) FAIRLEADS - Pairs B258 Small 5 1/2 (140mm) long x 2 3/8 (60mm) high B258A Includes Holding Pin B259 Medium with Holding Pin 6 (152mm) long x 3 (76mm) high B260 Large with Holding Pin 9 1/4 (235mm) long x 4 (102mm) high B262 Rolled Edge 9 1/2 (242mm) long x 2 (51mm) high B262 B259 B262A Rolled Edge 7 (178mm) long x 2 (51mm) high B111 B112 B113 B114 3 (76mm) Long B115 4 (102mm) Long B116 5 (127mm) Long B117 6 (152mm) Long FAIRLEADS - Rolled Edge Pairs 8 (203mm) Long 10 (254mm) Long 12 (305mm) Long ANCHOR CHOCKS - Deck Fitting B118 B119 B120 4 (102mm) Long 6 (152mm) Long 10 (254mm) Long B26 Small B26A Large 4 Parts per set FAIRLEADS - Screwdown Mount- B537 6 (152mm) x 2 1/2 (64mm) BOAT HOOK HEADS B13-8 (203mm) Single B13A - 8 (203mm) Double B114-9 (228mm) Single FAIRLEADS B366 3 3/4 (95mm) Long B367 4 1/2 (116mm) Long PAGE 5

HINGES, LATCHES & LETTERS HINGES B154-3 (76mm) B155-6 (152mm) B156-8 (203mm) HATCH FASTENERS B137 - Straight Clip B138 - Angled Clip (shown) B157-6 (152mm) HATCH HOLD-DOWN CLAMPS B441 - Flat Mounting B442 - Angled Mounting 5 (127mm) B158 - Swallow Fanfare HOOK - CABIN DOOR B443-4 (102mm) Larger sizes on application OFFSET HINGES OFFSET HINGE 90⁰ OFFSET HINGE 180⁰ HASPS & STAPLES B457-3 (76mm) B458-6 (152mm) B375-1 (25mm) B376-1 1/4 (32mm) B376A - 1 3/8 (35mm) B377-1 1/2 (38mm) 6 1/4 (158mm) open overall B378-1 (25mm) 4 1/2 (114mm) open overall B460-1 1/4 (32mm) B461-1 1/2 (38mm) COVER TARPAULIN TIE DOWNS Triangle Base B54-1 1/8 (29mm) x 1 1/8 (29mm) Straight Base Curved Ends B55-1 3/4 (44mm) x 1/2 (13mm) Hook - Oval Base B56-1 1/4 (32mm) x 3/4 (19mm) Straight Base B57-1 1/2 (38mm) x 1/2 (13mm) HATCH LIFTER - Circular HATCH LIFTER - Square B139-2 1/2 (64mm) Ø 7/8 (22mm) Ø Ring B153-2 3/4 (70mm) x 3 3/8 (86mm) 2 (51mm) Ring B141-4 (102mm) long. Closed Position B140-3 (76mm) long. Closed Position B142-5 (127mm) Swivel Type NUMBERS & LETTERS B216-2 (51mm) B217-3 (76mm) B218-4 (102mm) B219-6 (152mm) PAGE 6

PORT HOLES - Opening Round No Spigot PORT HOLES & ADJUSTERS PORT HOLES - Rectangular B227 - B228 - B229 - B230 - B231 - Glass Dia 3 (76mm) 4 (102mm) 5 (127mm) 6 (152mm) 8 (203mm) Overall Dia 6 3/4 (171mm) 7 3/4 (197mm) 9 3/4 (248mm) 10 3/4 (273mm) 12 3/4 (324mm) Hull Hile Dia 4 (102mm) 5 (127mm) 6 (152mm) 7 (178mm) 8 3/4 (222mm) PORT HOLES - Opening Round With Spigot (Complete with Dress Rings) Opening B241A B242 - B243 - Glass Size Overall Hull Size Glass Size Overall Hull Size Glass Size Overall Hull Size Non-Opening B244 Glass Size Overall Hull Size 10 (254mm) x 2 1/2 (64mm) 13 (330mm) x 5 1/2 (140mm) 11 1/4 (286mm) x 3 5/8 (92mm) 10 (254mm) x 4 (102mm) 13 1/2 (343mm) x 7 (178mm) 11 (279mm) x 4 3/4 (121mm) 14 1/2 (368mm) x 6 3/4 (172mm) 17 3/4 (451mm) x 10 (254mm) 15 (381mm) x 7 (178mm) 11 (279mm) x 4 3/4 (121mm) 13 1/2 (343mm) x 7 1/4 (184mm) 11 1/2 (292mm) x 5 1/4 (134mm) BOTH ARE COMPLETE WITH SIGOT AND OUTSIDE FINISHING RING. PORT HOLES - Opening Oval B232 - B233 - B234 - B235 - B235A Glass Dia 3 (76mm) 4 (102mm) 5 (127mm) 6 (152mm) 8 (203mm) Overall Dia 6 1/4 (159mm) 7 1/4 (184mm) 8 1/4 (210mm) 9 1/4 (235mm) 13 (330mm) PORT HOLES - Round Non-Opening - Deadlights Hull Hile Dia 4 (102mm) 5 (127mm) 6 (152mm) 7 (178mm) 9 1/4 (235mm) B244 TELESCOPIC ADJUSTERS 8 (203mm) x 4 1/2 (114mm) Oval Glass PORT HOLE - Replacement Rubber B469 B470 5/16 (8mm) Square 3/8 (10mm) Square Available in Black only. Sold in metre lengths HATCH ADJUSTER B439-9 (228mm) Closed B440-12 (305mm) Closed Opens 7 1/4 (183mm) B236 - B237 - B238 - B239 - B240 B241 Glass Dia 3 (76mm) 4 (102mm) 5 (127mm) 6 (152mm) 8 (203mm) 9 (229mm) Overall Dia 4 1/2 (114mm) 6 (152mm) 7 1/2 (190mm) 8 1/4 (210mm) 11 (279mm) 13 (330mm) Hull Hile Dia 3 1/4 (83mm) 4 3/4 (121mm) 5 3/4 (146mm) 6 1/2 (165mm) 8 1/2 (216mm) 9 3/4 (248mm) SKYLIGHT QUADRANT ADJUSTER B282-14 (356mm) PAGE 7

RIGGING BOBSTAY PLATES, EYE PLATES EYE BOLTS WITH RINGS B109-4 (102mm) B109-5 (127mm) B107-3/8 (10mm) Diameter Bolt x 2 (51mm) DiameterRing B108-1/2 (13mm) Diameter Bolt x 2 (51mm) Diameter Ring EYE BOLTS BACK STAY PLATE B15-8 (203mm) Long SASH EYES CHAIN PLATES B99-2 (51mm) x 5/16 (8mm) B100-2 (51mm) x 3/8 (10mm) B101-3 (76mm) x 3/8 (10mm) B102-4 (102mm) x 3/8 (10mm) B103-6 (152mm) x 3/8 (10mm) B104-3 (76mm) x 1/2 (13mm) B105-4 (102mm) x 1/2 (13mm) B106-6 (152mm) x 1/2 (13mm) B280 - Small 1 7/8 (48mm) x 3/4 (19mm) Base 1/2 (13mm) Ring Diameter B281 - Large 1 3/8 (35mm) x 2 1/4 (57mm) Base 3/4 (19mm) Ring Diameter MAST BANDS BINNACLE RINGS B48-4 (102mm) Long B49-6 (152mm) B50-9 (229mm) B51-10 (254mm) B52-12 (305mm) B53-18 (457mm) LEADS B220-1 (25mm) B221-1 1/4 (32mm) B222-1 3/4 (44mm) B223-2 (51mm) B224-2 1/2 (64mm) B225-3 (76mm) B226-3 1/2 (89mm) B12-1 1/2 (38mm) Diameter Ring B176-7lb (3 Kilos) B177-14lb (6 Kilos) B178-28lb (13 Kilos) PAGE 8

DECK PLATES DECK PLATES & FITTINGS HOOD FITTINGS B159 - Spray Hood Fitting Verticle Base B160 - Spray Hood Fitting Horizontal Base B63-1 (25mm) B64-1 1/4 (32mm) B65-1 1/2 (38mm) B66-2 (51mm) B67-2 1/2 (64mm) B68-4 (102mm) B69-5 (127mm) B70-6 (152mm) STAUNCHION BASES B435-90⁰ Base B436-84⁰ Base Fits up to 1 (25mm) Tubing 4 (102mm) long x 3 1/2 (89mm) wide DECK FILLERS STAUNCHION CAPS B437 - Fit 7/8 (22mm) Tubing B438- Fit 1 (25mm) Tubing Fuel Water Waste Plane HAND RAIL STAUNCHIONS Staunchion End Cap B149 - for 3/4 (19mm) Railing B150 - for 1 (25mm) Railing Rail clearance 1 1/2 (38mm) B71-1 1/4 (32mm) BSP Pipe Thread B72-1 1/2 (38mm) BSP Pipe Thread B73-2 (51mm) BSP Pipe Thread Safety Chains available on request Hose Tails - Extra Staunchion Centre B151 - for 3/4 (19mm) Railing B152 - for 1 (25mm) Railing Rail clearance 1 1/2 (38mm) HOSE TAILS Hand Rail Centre Bracket B148 - for 7/8 (22mm) Tubing Rail Clearance 1 1/4 (32mm) B500-3/4 (20mm) BSP to 3/4 (20mm) I.D. Hose B501-3/4 (20mm) BSP to 1 (25mm) I.D. Hose B502-1 (25mm) BSP to 1 (25mm) I.D. Hose B503-1 (25mm) BSP to 1 1/2 (40mm) I.D. Hose B504-1 1/4 (31mm) BSP to 1 1/4 (31mm) I.D. Hose B505-1 1/4 (31mm) BSP to 1 1/2 (40mm) I.D. Hose B506-1 1/2 (40mm) BSP to 1 1/2 (40mm) I.D. Hose B507-1 1/2 (40mm) BSP to 2 (50mm) I.D. Hose B508-2 (50mm) BSP to 2 (50mm) I.D. Hose Hand Rail End B147 - to fit inside 7/8 (22mm) x 18 gauge tubing. Rail Clearance 1 1/4 (32mm) PAGE 9

HANDLES, EXHAUST & GUNWALE CAPS HANDLES - Multi Use EXHAUST OUTLETS - with flap BOW HANDLES B143 - Lifting Flat 6 (152mm) Long B144 - Lifting Round 6 (152mm) Long EXHAUST FLANGES B369-2 1/2 (64mm) Dia B370-2 1/2 (64mm) Dia with tail. GRAB HANDLES B145-10 3/8 (263mm) Long B371-12 (305mm) Hole Centres B372-24 (610mm) Hole Centres B373-36 (915mm) Hole Centres B93-1 1/2 (38mm) Dia B94-2 (51mm) Dia B95-2 1/2 (64mm) Dia B96-1 1/2 (38mm) with tail B97-2 (51mm) with tail B98-2 1/2 (64mm) with tail B98A - 3 (76mm) with tail VENTILATOR - Fuel Tank Breather B374-11 3/4 (298mm) Long B340 - Through Hull Fitting 3/8 (10mm) I.D Tube TRANSOM STEP GUNWALE CAPS B146-6 1/2 (165mm) FLAG POLE SOCKETS - Angled B401 - End Cap 1 1/4 (32mm) Section 2 1/2 (63mm) Sides B402 - Nose Cap 1 3/8 (35mm) Section 2 3/8 (67mm) Sides B403 - Transom 1 3/8 (35mm) Section 3 (76mm) Sides PAGE 10 B127 - for 3/4 (19mm) Pole B128 - for 7/8 (22mm) Pole B129 - for 1 (25mm) Pole B130 - for 1 1/4 (32mm) Pole B131 - for 1 1/2 (38mm) Pole B462 - Nose End Cap 110⁰ 1 3/8 (35mm) Section 2 1/2 (63mm) Sides B472 - Centre Cap 1 3/8 (35mm) Section 3 (76mm) Long

VENTILATION VENTILATOR - Mushroom Vents VENTILATOR - Butterfly Vents B330-3 (76mm) I.D. x 4 3/4 (121mm) O.D. of Flange B331-4 (102mm) I.D. x 5 3/4 (146mm) O.D. of Flange B332-5 (76mm) I.D. x 8 (203mm) O.D. of Flange B333-6 (152mm) I.D. x 8 3/4 (222mm) O.D. of Flange B322-4 (102mm) O.D. B323-6 1/4 (159mm) O.D. VENTILATOR - Shell Vents VENTILATOR - Cowl Vents B334-5 (127mm) x 3 (76mm) B335-6 3/4 (171mm) x 4 (102m) B336-5 1/2 (140mm) x 4 3/4 (121mm) VENTILATOR - Turtle Vents B324-1 1/4 (32mm) I.D. Base x 4 (102mm) Opening x 5 1/2 (140mm) High Complete with clamp & deck plate B64 B325-2 1/2 (64mm) I.D. Base x 5 (127mm) Opening x 6 1/2 (165mm) High Complete with clamp & deck plate B67 B326-4 (102mm) I.D. Base x 7 1/2 (191mm) Opening x 9 (229mm) High Complete with clamp & deck plate B68 VENTILATOR - Half Cowl Vents B337-8 1/4 (216mm) x 7 (178mm) VENTILATOR - Bilge Blower Vents B338-5 3/4 (146mm) x 4 (102m) B339-7 1/2 (191mm) x 4 1/2 (114mm) B327-1 1/4 (32mm) x 5 1/2 (140mm) High Order in pairs B328-2 1/2 (64mm) x 6 1/2 (165mm) High Order in pairs B329-4 (102mm) I.D. x 9 (229mm) High Order in pairs PAGE 11

CONTROLS, ROWLOCKS & SPURLING PIPES THROTTLE CONTROL SPURLING PIPE - Straight B364-1 1/2 (38mm) I.D. 1/4 (6mm) Chain B286-2 (51mm) I.D. 3 (76mm) High Use up to 3/8 (10mm) Chain B287-3 (76mm) I.D. 4 1/2 (114mm) High Use up to 5/8 (16mm) Chain B315 - Single screw down type B316 - Double screw down type Lever action ROD HOLDERS - Fixed Square Base B487 - Rectangular deck flush mount with PVC insert SPURLING PIPE - Bent SPURLING PIPE - Oval B365-1 1/2 (38mm) I.D. Use up to 1/4 (6mm) Chain B288-2 (51mm) I.D. Use up to 3/8 (10mm) Chain B289-3 (76mm) I.D. Use up to 5/8 (16mm) Chain ROD HOLDERS - Fixed Round Base ROWLOCKS - Drop Type B488 - Roundr deck flush mount with PVC insert B290-5 1/4 (133mm) x 3 3/4 (95mm) HAWSE PIPE - Oval B471 - Internal Dim 2 (51mm) x 4 (102mm) B257D - Includes Gunwale Plate DRAIN PLUG ROWLOCKS - Offset Fork 4 (102mm) shaft B300-1/2 BSP 2 Flange B257-OS Side mount B257-OG Gunwale mount ROWLOCKS - Even Fork 6 (152mm) shaft STRAINERS - Rose B291-3 (76mm) B292-4 (102mm) B293-5 (127mm) B294-6 (152mm) B295-8 (203mm) PAGE 12 B257-ES Side mount B257-EG Gunwale mount

STRAINERS - Multibar STRAINERS, SCOOPS & PIPE FITTINGS STUFFING BOXES - Metal Bearings B298 - Small 5 (127mm) x 3 1/2 (89mm) B298A - Medium 7 (178mm) x 4 (102mm) B299 - Large 9 (229mm) x 5 1/2 (140mm) INLET WITH STRAINER SCOOP Shaft Diameter B306-3/4 (19mm) B307-7/8 (22mm) B308-7/8 (22mm) Heavy Duty B309-1 (25mm) B310-1 1/8 (29mm) B311-1 1/4 (32mm) B312-1 1/2 (38mm) B313-1 3/4 (44mm) B314-2 (51mm) B314A - 2 1/4 (57mm) SHAFT LOGS - Flexible SCOOP B175-3/4 (19mm) I.D. with 5 (127mm) x 3 1/4 (82mm) Multibar Scoop. Shaft Diameter B272-3/4 (19mm) B273-7/8 (22mm) B274-1 (25mm) B444-1 1/4 (32mm) B445-1 1/2 (38mm) B446-1 3/4 (44mm) Stuffing Box Only B272A - 3/4 (19mm) B273A- 7/8 (22mm) B274A - 1 (25mm) B444A - 1 1/4 (32mm) B445A - 1 1/2 (38mm) B446A - 1 3/4 (44mm) STERN BEARING - Metal Bearing B275 - Plain 3 1/2 (89mm) x 3 1/4 (83mm) SCOOP VISORS Shaft Diameter B302-3/4 (19mm) B303-7/8 (22mm) B304-1 (25mm) B305-1 1/4 (32mm) B381-1 1/2 (38mm) B382-1 3/4 (44mm) B383-2 (51mm) B384-2 1/4 (57mm) B276 - Small 4 3/4 (121mm) x 2 5/8 (67mm) B277 - Large 5 1/2 (140mm) x 3 1/2 (89mm) INLETS / OUTLETS SCOOP WATER B278 - Flange 2 (51mm) x 1 1/2 (38mm) Base, 3/4 (19mm) Thread. B279 - Flange 3 (76mm) Diameter 3/4 (19mm) Thread. B278 B279 B161-3/8 (10mm) I.D. B162-1/2 (13mm) I.D. B163-3/4 (19mm) I.D B164-1 (25mm) I.D. B165-1 1/4 (32mm) I.D. B166-1 1/2 (38mm) I.D. B167-2 (51mm) I.D. B168-1 1/4 (32mm) I.D. B169-2 1/2 (64mm) I.D. B170-3 (76mm) I.D. PAGE 13

GUDGEONS & BELLS DEE PLATES - Horizontal / Vertical RUDDER GUDGEONS - With Pintle Horizontal DEE BOLTS TILLER HINGE Vertical B86H - 3/8 (10mm) Dia Hole B87V - 3/8 (10mm) Dia Hole B88H - 1/2 (13mm) Dia Hole B89V - 1/2 (13mm) Dia Hole B90H - 5/8 (16mm) Dia Hole B91V - 5/8 (16mm) Dia Hole B92 - Odd sizes made to order B79-6 (152mm) x 3/8 (10mm) B80-6 (152mm) x 1/2 (13mm) B81-6 (152mm) x 5/8 (16mm) B426-43 (1100mm) Overall for 7/8 (22mm) Shaft B427 - For 1 (25mm) Shaft B463 - For 1 1/4 (32mm) Shaft Light Duty Heavy Duty RUDDER GUDGEONS - with pintle B132-1/2 (13mm) between straps 3/8 (10mm) pin B133-3/4 (19mm) between straps 1/2 (13mm) pin B134-1 (25mm) between straps 1/2 (13mm) pin B135-1 1/4 (32mm) between straps 5/8 (13mm) pin B136-1 1/2 (38mm) between straps 5/8 (13mm) pin RUDDER GUDGEONS - Heavy Duty B464-1 1/2 (38mm) between straps B465-1 3/4 (44mm) between straps B466-2 (51mm) between straps B467-2 1/4 (57mm) between straps B468-2 1/2 (64mm) between straps B468A - 3 (76mm) between straps Set includes top & bottom gudgeons & dee plates HAND BELLS - Auctioneers/Schools SHIP BELLS PAGE 14 B1-100mm Dia B2-125mm Dia B3-150mm Dia B4-200mm Dia B5-250mm Dia B6-300mm Dia B7-350mm Dia B8-100mm Dia B9-125mm Dia B10-150mm Dia Available in Sandblast or Polished finish.

FAX ORDER FORM BRIGGS MARINE A DIVISION OF ALLIANCE CASTING PTY LTD 51-53 Lathams Road CARRUM DOWNS, VIC 3201 TEL: 03 8773 4302 FAX: 03 8773 4370 www.briggsmarine.com.au A.B.N. 27 930 169 683 Customer: Address: Order # Contact Name: Phone # Qty Part # Description Pol Bronze Chrome Aluminium Nominated Freight Carrier: Freight Carrier Account # Payment Options: Please tick your preferred option for payment Direct Deposit Cheque Credit Card Account SHIPPING TERMS: Goods are dispatched once payment has been received unless prior arrangement is made with management. Freight is the responsibility of the customer. Once dispatched onto the carrier the goods are considered delivered. PLEASE PHOTOCOPY THE ORDER FORM TO PRESERVE THIS CATALOGUE FAX TO 03 8773 4370 Visit www.briggsmarine.com.au to download this order form

BRIGGS MARINE A DIVISION OF ALLIANCE CASTING PTY LTD 51-53 Lathams Road CARRUM DOWNS, VIC 3201 TEL: 03 8773 4302 FAX: 03 8773 4370 www.briggsmarine.com.au