MANURE MIXERS Our service range for effective manure management
PTO Driven Mixers Our tractor driven agitator Types Z4, Z5 and Z6 are characterized by easy handling, quiet operation and high mixing performance. By means of the drive head with dual tapered roller bearings, the radial and axial forces are transferred to the mixer tube and to the frame so that a Operation is possible at 1,000 rpm. For open and closed tanks Z4 Z5 Z6 Z6 Thanks to the modular design is a simple Access to all of the built Components possible. SUMA Material agitators are completely ready for use supplied with drive, universal frame, Tube drive shaft (Stub shaft), propeller with scraper and rest. Accessories: Bearing housing seals with mechanical seals, SiC / SiC, and protection rings for lagoon applications, hydraulic cylinders for folding suspension and drive shafts for covered pits. Giantmix Z4 Pipe Ø 4.7 x 0.2 in, galvanized Pipe lengths from 16 to 23 ft Propeller HD+ Ø 22-26 in For tractor power 80-180 HP Giantmix Z5 Pipe Ø 6.3 x 0.3 in, galvanized Pipe lengths from 20 to 26 ft Propeller HD+ Ø 23-28 in For tractor power 120-220 HP Giantmix Z6 Pipe Ø 7.6 x 0.2 in, galvanized Pipe lengths from 25 to 30 ft Propeller Ø 28-33 in For tractor power of greater 180 HP 2
PTO Driven Mixers For high vessels The PTO driven Giantmix Z3, together with a mounting bracket is suitable for stationary installation. A rubber compression seal (Ø 7.9 in) is approved for an installation depth of 19.7 ft. An oil pressure equalization tank is used for leak monitoring of the bearing housing. There are versions with shaft sealing rings (packing) or SiC / SiC mechanical seals. Galvanized versions are available as well as pipes and impellers in ss304 stainless steel. Agitators can also be equipped with 15-30 HP motors for automatic operation. Giantmix Z3 HY stationary with installation console and rubber compression seal Giantmix FR stationary with installation console and rubber compression seal Giantmix Z3 stationary Pipe Ø 4,7 x 0.1 in, galvanized or stainless steel ss304 / ss316 Pipe lengths of 6.6-9.8 ft Propeller Ø 20-26 in galvanized or ss304 For tractor power 80-180 HP Installation console (for plugging or pouring) Oil / pressure expansion tank Rubber / compression seal, EPDM70 Ø 7.9 in Installation up to 19.7 ft below substrate level 3
PTO Driven Mixers Giantmix Z3 Mixers for Raceway and Slalom Canals Giantmix MZR Mixers for Raceway and Slalom Systems Pipe Ø 4.7 x 0.1 in, galvanized or ss304 Pipe lengths from 13-18 ft Propeller Ø 23-26 in, galvanized or ss304 Propeller for either push or pull direction Shaft sealing with rotary lip-seals, optional mecahnical seal wirh SiC/SiC faces Complete, ready to install unit Optional guide rail and wall cage, galvanized or ss304 4 Giantmix Z3 with up to 18 ft of pipe, together with guide rails, wall cage and frame; mounted for use in manure chute channel. The agitators can be stationary or be used alone. Galvanized construction is standard. By request ss304 is available as an option.
PTO Driven / Electric Mixers Giantmix Type MZR for Raceway or Slalom Canals For automatic mixing operation, SUMA offers the Giantmix Type MZR motor driven mixers with installed power of 15-25 HP. These are also supplied with a PTO input and guard. During power outages, this allows operation of the mixer with a tractor. Giantmix MZR Mixers for Raceway and Slalom Systems Pipe Ø 3.9 x 0.1 in, galvanized or ss304 Pipe lengths from 13 to 18 ft Propeller Ø 23-26 in, galvanized or ss304 Propeller for either push or pull direction Motor power from 15 to 25 HP (11 to 18.5 kw) Shaft sealing with rotary lip-seals, optional mecahnical seal wirh SiC/SiC faces Complete, ready to install unit, w/o switch Optional guide rail and wall cage, galvanized or ss304 5
Electric Agitator REKORDMIX The SUMA agitator type Rekordmix have either a 5.5 HP, 7.5 or 10 HP motor. The delivery can be made completely ready for use with a manual turning- / delta switch and cables. In addition to the standard galvanized version, there are also options with stainless steel pipes and impellers. Installation/mounting options for every application are available. For small and mid size pits - open and closed vessels Together with the SUMA suspension mounting frame EB2 the Rekordmix units can be used with high or steel containers. With the EB2, the agitators can be adjusted laterally and for swivel and tilt. Rekordmix Pipe Ø 2.8 x 0.1 in, galvanized or ss304 Pipe lengths from 7.4 to 14 ft (in 1.6 in intervals) Motor power 5.5 to 10 HP (4 to 7.5 kw) Speeds 1.760 rpm (at 60 Hz) Propeller 10.8-11.8 in, galvanized or ss304 With support foot or guard ring, galvanized steel or ss304 Shaft sealing with rotary lip-seals, optional mecahnical seal wirh SiC/SiC faces Accessories Chassis wide (39.4 in) or narrow (22.8 in) Fixed clamps for plugging Suspension frame EB 2 for mounting on high or steel tanks 6
Submersible Mixers OPTIMIX For agricultural applications Type series 2G / 3G / VA The submersible agitators of the 2G series are only suitable for agricultural applications as well as for harsh operating conditions in biogas tanks. Motor ratings of 5.5 / 12 and 20 HP are available. The flanged motor mount is suitable for guide of 3.1 / 3.9 / 4.7 in square cross-section. If performance is really needed, SUMA offers the OPTIMIX 3G, with a 33 HP motor for continuous operation. For substrates with a low ph-values and use in very aggressive media, the OPTIMIX Type 2A, in all stainless steel, is available. The SUMA 4-roller guide system ensures it is easy to slide the mixers up and down the guide masts. The 3 separate oil chambers, motor, gearbox and drive head, ensure safe and reliable agitation. The seal is made using the proven mechanical seal with SiC / SiC seal rings, incorporated in the drive head. SUMA mixers are suitable for manual switching or automatic scheduled starts; for soft start controls or for variable frequency drives. OPTIMIX 2G: 4.0 / 9.0 / 15 kw (5.5 / 12 / 20 HP) - 460 rpm at 60 Hz 2G: 4.0 / 9.0 / 15 kw (5.5 / 12 / 20 HP) - 330 rpm at 60 Hz 3G: 25 kw (34 HP) - 320 rpm at 60 Hz 2A: 13.5 kw (18 HP) - 460 rpm at 60 Hz Propeller galvanized, hardened or stainless steel V2A Mechanical seal SiC / SiC 3 separate oil chambers for motor - gearbox - drive head Supplied with motor bracket, 10 m cable without control (accessory) 7
Submersible Mixers OPTIMIX The mobile version of the OPTIMIX UG series with 10 and 15 HP power is suitable for closed pits up to 11.5 ft deep. OPTIMIX mobile for closed containers When inside buildings with headroom and/or space restrictions, the squaretube can be designed as telescopic. A narrow chassis is available. OPTIMIX Mobile 4 kw (5.5 HP) with propeller speed of 300 rpm 9 kw (12 HP) with propeller speed of 460 rpm Can be lowered up to 11.5 ft Tilt range + / - 110 Pit opening minimum 24 x 36 in required Standard chassis 38.6 in wide and 48 in long Traverse bar for clamping to the vessel top Telescopic tube as an option with limited ceiling height Supplied without switch 8
Submersible Mixers OPTIMIX OPTIMIX Stationary for Raceway and Slalom Systems For raceway and slalom systems, the OPTIMIX of the 2G series with 12 to 20 hp motors can be used. The submersible mixer is attached to a robust PVC plate. The unit can be connected with Z-bars on a made in an existing barrier wall or window, on-site wall slot with guide. OPTIMIX Stationary Optimix 2G: 12 / 20 hp with propeller speed of 380 rpm Propeller Ø 22-26 in, galvanized or ss304 Supplied with 32.8 ft motor power cable, but without switch PVC sealing plate 1.2 inch Optional: completely made in ss304 - OPTIMIX 2A with 18.5 hp and 380 rpm Optional: Star-Delta-Switch or SUMA-soft-start OPTIMIX Adjustable Optimix 2G / 2A adjustable, adjustable in height through cable winch For a depth up to 13 ft 9
Submersible Mixers OPTIMIX For all manure lagoons, submersible mixers by SUMA can and are used. Depending on the basin size motor powers of 5 to 33 HP are available to choose. OPTIMIX for Lagoons The suspension device is attached on the control bar and the base plate dowelled to the concrete foundation. OPTIMIX for Lagoons Used with all OPTIMIX Series - 2G / 2A / 3G Supplied with motor bracket, 10 m cable without control (accessory) Guide masts: 4 x4 or 5 x 5 in, ss304 Supplied with lifting boom, winch with cable, floor pivot and top mount. 10
Submersible Mixers OPTIMIX OPTIMIX for Vessel Heights to 33 ft For open and closed containers, several different mounting devices are available: EV 1 EV 3 EV 5 EV 4 Suitable for clamping - also suitable for steel containers, 13-20 ft container height Suitable for plugging to the wall, 13-20 ft container height Suitable for plugging to the wall, 20-33 ft container height Suitable for closed container (not gas tight), 13-20 ft container height. EV4 EV5 OPTIMIX for Vessel Heights to 33 ft Used with all OPTIMIX Series - 2G / 2A / 3G Power ratings 5-33 PS Lateral swivel range + / - 60 EV 1/3/4: ss304 guide mast 3 x 3 or 4 x 4 in EV 5: Guide mast 4 x 4 or 6 x 6 in in ss304 Floor pivot, wall mount and lifting cable in ss304 Top mount (EV4) galvanized Winch galvanized With 33 ft motor cable, without switch SUMA 4-roller guide system EV5 with proprietary SUMA cable routing and strain relief behind the guide mast 11
CONTACT SUMA America Inc. 2700 Patriot Blvd Suite 250 Glenview, IL 60026 USA Phone: (312) 945 9049 E-mail: sales@gosuma.com www.gosuma.com YOUR LOCAL REPRESENTATIVE As per 2015/03