Invacare trapeze units are an important patient room accessory designed to

Trapeze Equipment Invacare trapeze units are an important patient room accessory designed to help patients change positions while in bed and to aid in transfer from bed to chair with minimum attendant assistance. Trapeze units have a wide range of height adjustments and handbar positions to maximize patient accessibility. The unit can be installed quickly and easily on an Invacare floor stand or on any Invacare home care bed end. Fixed Offset Trapeze Bar Model no. 7740 Heavy-gauge, octagon ; no tools required for easy assembly Wall bumpers and padded mounting brackets protect bed ends and wall surfaces For use on Model no. 7714 floor stand or on metal frame headboards only Assisted weight capacity of 250 lb. Includes bar, brackets and grab bar Model no. 7740 7714 Overall height 61" 38" Octagon steel tubing, diameter 1.25" 1.25" Reach 34" n/a Base width n/a 32" Base length n/a 40" Weight 17 lb. 24 lb. Shipping via truck via UPS Warranty 3 years 3 years Shown with #7740 Trapeze Trapeze Floor Stand Model no. 7714 Provides free-standing support for Model no. 7740 fixed trapeze unit Folds flat for convenient storage and handling Assisted weight capacity of 250 lb. Invacare Corporation www.invacare.com USA One Invacare Way Elyria, Ohio 44035-4190 (800) 333-6900 Canada 5970 Chedworth Way Mississauga, Ontario L5R 3T9 Canada (800) 668-5324 Invacare is a registered trademark and Yes, you can. and CareGuard are trademarks of Invacare Corporation.Teflon is a registered trademark of E.I. du Pont de Nemours and Company. are subject to change without notification. All models on this page are manufactured in an ISO9001 facility. 2001 Invacare Corporation Form No. 00-276 Rev. 03/01

Invacare Home Care Beds and Bed-Related Products Invacare Home Care Beds and Bed-Related Products

Bariatric Bed The Invacare BAR600 is a heavy-duty bed frame that is designed for bariatric individuals and is capable of supporting up to 600 pounds. Extra bracing has been integrated into the home care bed frame, along with a wider surface and truss assembly, to provide maximum support. The client or caregiver is able to operate the bed using the hand pendant,which changes the positioning of the head and foot sections as well as the bed height function. Even though this is a substantial bed, setup within the home is easy. FEATURES Heavy-duty frame design ensures added strength for client support Heavy-duty bed sleep surface is 17% larger to ensure comfortable positioning Split-spring design with removable bed ends for ease in setup No special tools necessary for in-home setup Easy-release motor mounts allow quick motor removal Robotically welded, steel frame construction Pendant allows for dynamic client positioning Quiet, smooth operation Emergency crank functions manually to lower any raised section of bed 600-lb. maximum client weight capacity UL73 approved Use with Invacare bariatric mattress (BARMATT) and bed rails (6640) Manufactured in an ISO9001 facility Designed to meet E0298 (former K0456) BAR600 Bariatric Bed NEW The Invacare BAR600 is a heavy-duty bed frame that is designed for bariatric individuals and is capable of supporting up to 600 pounds. The easy-to-use pendant control provides motorized positioning of the head and foot sections, as well as the bed height. Hand pendant BAR600 with head raised BAR600 Bariatric bed Bed height* min. 18" - max. 25" Sleep surface length 80" Sleep surface width 42" Overall length 88" Overall width 42" Head-end height min. 31.5" - max. 39.5" Foot-end height min. 29" - max. 37" Split spring to ends head 43" - foot 44.5" Carton size Shipping weight BAR5000 Head spring 47.25" l x 10" w x 43.75" d 100 lb. BAR5490 Foot spring 43.5" l x 10" w x 43.75" d 131 lb. BAR5401 Bed ends 43" l x 9.5" w x 25.5" d 65 lb. Warranty All welds lifetime Frame/structure 5 years Mechanical/electrical 1 year *Measurement from floor to bed deck.

Invacare full-electric beds offer the greatest convenience for the patient and caregiver. The easy-to-use pendant control provides motorized positioning of the upper body and knees and can be placed anywhere for maximum patient comfort. The pendant control also adjusts bed frame height for efficient use of accessories and for safe and easy transfer. FEATURES Synchronization, split-spring design and interchangeability ensure easy use, setup and operation Quiet, smooth operation Reinforced head spring provides maximum bed strength and support Easy-release motor mounts allow quick motor removal Tente casters increase mobility and provide secure locking Reinforced cornerplates prevent bending Robotically welded steel frame construction Trendelenberg position can be easily achieved 450-lb. total weight capacity UL73 and CSA approved Manufactured in an ISO9001 facility Full-Electric Bed 5410 Full-Electric Bed All positions are controlled electrically to provide the greatest convenience for the patient and ease to the caregiver. Hand pendant 5410 Full-electric bed Bed height* min.16" - max. 24.5" Overall bed length 88" - width 36" Head-end height min. 29" - max. 37.25" Foot-end height min. 26.25" - max. 35.5" Carton size Shipping weight 5000 Head spring 37" l x 44" w x 8" d 45 lb. 5490 Foot spring 37" l x 47" w x 9" d 93 lb. 5401 Bed ends 37" l x 27" w x 9" d 58 lb. Warranty All welds lifetime Mechanical/electrical 2 years *Measurement from floor to bed deck.

Invacare semi-electric beds combine effortless positioning of the upper body and knees with the economy of manual bed height adjustment. The pendant control provides motorized positioning of the upper body and/or knees. A manual crank adjusts bed frame height for caregiver assistance. Semi-Electric Beds FEATURES Synchronization, split-spring design and interchangeability ensure easy use, setup and operation Quiet, smooth operation Reinforced head spring provides maximum bed strength and support Easy-release motor mounts allow quick motor removal Tente casters increase mobility and provide secure locking Reinforced cornerplates prevent bending Robotically welded steel frame construction 450-lb. total weight capacity UL73 and CSA approved Manufactured in an ISO9001 facility 5310 Semi-Electric Bed Hand pendant Electric upper body and knee adjustment combined with single crank height adjustment located at the foot end of the bed 5210 Semi-Electric Bed Hi/lo crank inserts at both ends to raise and lower bed height independently Ideal for trendelenburg/reverse trendelenburg positioning 5310 Semi-electric bed Bed height* min. 16" - max. 24.5" Overall bed length 88" - width 36" Head-end height min. 29" - max. 37.25" Foot-end height min. 26.25" - max. 35.5" Carton size Shipping weight 5000 Head spring 37" l x 44" w x 8" d 45 lb. 5890 Foot spring 37" l x 47" w x 9" d 81 lb. 5301 Bed ends 37" l x 27" w x 9" d 58 lb. 5210 Semi-electric bed Bed height* min. 15.5" - max. 24.5" Overall bed length 88" - width 36" Head-end height min. 29" - max. 37.5" Foot-end height min. 26.25" - max. 35.5" Carton size Shipping weight 5000 Head spring 37" l x 44" w x 8" d 45 lb. 5890 Foot spring 37" l x 47" w x 9" d 81 lb. 5200 Bed ends 37" l x 27" w x 9" d 58 lb. Warranty (all models) All welds lifetime Mechanical/electrical 2 years *Measurement from floor to bed deck.

Invacare manual beds offer the same convenient features as electric models but adjust manually for greatest economy. Manual cranks raise and lower upper body and knees, as well as bed height. FEATURES Synchronization, split-spring design and interchangeability ensure easy use, setup and operation Quiet, smooth operation Reinforced head spring provides maximum bed strength and support Tente casters increase mobility and provide secure locking Reinforced cornerplates prevent bending Robotically welded steel frame construction 450-lb. total weight capacity Manufactured in an ISO9001 facility 5307 Manual Bed All positioning achieved manually from one convenient location at foot end of the bed Manual Beds 5207 Manual Bed Hi/lo crank inserts at head and foot ends to raise and lower bed height independently Ideal for trendelenburg/reverse trendelenburg positioning 5307 Manual bed Bed height* min. 16" - max. 24.5" Overall bed length 88" - width 36" Head-end height min. 28.88" - max. 37.25" Foot-end height min. 26.25" - max. 35.5" Carton size Shipping weight 5000 Head spring 37" l x 44" w x 8" d 45 lb. 5770 Foot spring 37" l x 47" w x 9" d 50 lb. 5301 Bed ends 37" l x 27" w x 9" d 58 lb. 5207 Manual bed Bed height* min. 15.5" - max. 24.5" Overall bed length 88" - width 36" Head-end height min. 28.88" - max. 37.5" Foot-end height min. 26.25" - max. 35.5" Carton size Shipping weight 5000 Head spring 37" l x 44" w x 8" d 45 lb. 5770 Foot spring 37" l x 47" w x 9" d 50 lb. 5200 Bed ends 37" l x 27" w x 9" d 58 lb. Warranty (all models) All welds Mechanical/electrical *Measurement from floor to bed deck. lifetime 2 years

Bed Rails Safety bed rails are some of the most important security and accident-prevention accessories used in the patient room today. That s why all Invacare safety bed rails feature durable chrome-plated, welded steel construction, and are designed to withstand heavy-duty use. These rails can be installed permanently or semi-permanently on all springfabric medical-style beds, and they are easy to attach no tools are necessary for assembly on most models. Deluxe Clamp-On Telescoping Bed Rail Model no. 6625 Heavy-duty, 1" chrome-plated, welded Nylon-coated, flat channel crossbraces rest on top of the spring section and are held in place with simple clamps NEW Third-location height adjustment permits middle positioning to eliminate the gap created between the mattress and rail when the head of the bed is raised (caregiver attendance still required) Deluxe Spring-Loaded Telescoping Bed Rail Model no. 6628 Heavy-duty, 1" chrome-plated, welded Self-adjusting spring-loaded crossbraces snap easily into place without tools for quick installation NEW Third-location height adjustment permits middle positioning to eliminate the gap created between the mattress and rail when the head of the bed is raised (caregiver attendance still required) CareGuard Spring-Loaded Telescoping Bed Rail Model no. 6650 Durable 7 8" chrome-plated, welded Self-adjusting spring-loaded crossbraces snap easily into place without tools for quick installation Third-location height adjustment permits middle positioning to eliminate the gap created between the mattress and rail when the head of the bed is raised (caregiver attendance still required) Clamp-On Telescoping Bed Rail Model no. 6623 Durable 7 8" chrome-plated, welded Nylon-coated, flat-channel crossbraces rest on top of the spring section and are held in place with simple clamps Spring-Loaded Telescoping Bed Rail Model no. 6629 Durable 7 8" chrome-plated, welded Self-adjusting spring-loaded crossbraces snap easily into place without tools for quick installation

6640 Half-Length Bed Rail Heavy-duty 1" chrome-plated, welded Single flat crossbrace is secured with bolt-on clamp assembly (some assembly required) For optimal security and convenience, four half-length rails are recommended (one set for head area, one set for foot area) Use with bariatric bed Model no. BAR600 6630 Half-Length Bed Rail Heavy-duty, 1" chrome-plated, welded Teflon -coated bushings ensure smooth raising and lowering action Dual flat-channel crossbraces are secured with wing-nut clamp assemblies (some assembly required) For optimal security and convenience, four half-length rails are recommended (one set for head area, one set for foot area) 6631 Telescoping Home Bed Rail Tubular 7 8" chrome-plated, welded steel side rails have crossbraces with eight preselected lengths from 36" to 58" For use with home or dormitory-style beds; fits between mattress and box spring Rails fit most single and double beds (do not fit queen- or king-size beds) Rail height Deck-width Width Interchanges Rail length above deck adjustability between Shipping Model no. with Model nos. min. max. raised lowered min. max. bed rails weight Warranty 6623 6627 & 6629 47" 74" 14.5" 1.75" 32" 36" 39" 29 lb. 3 years limited 6625 6658 & 6628 47" 74" 14.5".50" 32" 36" 39" 35 lb. 3 years limited 6628 6625 & 6658 47" 74" 15.25" 1" 31" 37" 34.5" - 40.5" 35 lb. 3 years limited 6629 6623 & 6627 47" 74" 15.25" 1" 31" 37" 34.5" - 40.5" 29 lb. 3 years limited 6630 30" 30" 15" 2" 32" 36" 38" 29 lb. 3 years limited 6631 47" 74" 16.25" 3.75" 36" 58" 36" - 58" 29 lb. 3 years limited 6640 30" 30" 15" 1.50" 34" 36" 37" - 39" 25 lb. 2 years limited 6650 47" 74" 15.25" 1" 31" 37" 35" - 41" 29 lb. 2 years limited Bed Rails and Accessories Bed Accessories Bed Buggy Model no. 5140 Used to transport split spring or assembled bedspring quickly and easily Allows for one-person set-up in much less time Can be used on all Invacare beds Extender Model no. 5143 Designed to expand 80" bed frame to 84" Complete with extended head pull tube and drive shaft, link fabric and helicals Not available on bariatric bed Model no. BAR600 Stor-A-Bed Model no. 5142 The ultimate bed storage unit. Uses both bed ends to transport or store bed. Helps maintain bed inventory,requiring less warehouse space Can be used on all Invacare beds Model nos. 6625, 6628, 6623, 6629, 6630 and 6631 are manufactured in an ISO9001 facility.

Mattresses and Mattress Covers Now you can offer your customers the comfort, protection and durability of superior home care mattresses by Invacare, along with Invacare mattress covers. Choose from innerspring or high-density foam mattresses; all of them conform to California Technical Bulletin #117 for fire retardancy. Mattress covers will keep your Invacare mattress clean and fresh, and protect it from stains, odors, dust and incontinence. Covers are made of non-allergenic, waterproof vinyl, and are available in zippered and contour styles. MC0195 zippered mattress cover comes individually wrapped; 12 per case. FV5010 Foam Mattress High quality 1.5 lb./cu. ft.-density foam provides comfortable, firm support Contour cuts on top surface reduce skin shear; articulation cuts on bottom increase mattress life Durable 11-ounce vinyl cover is antibacterial, anti-static, acid-resistant and waterproof for easy use and care Equipped with two screened brass vents MC0065 contoured mattress cover comes individually wrapped; 12 per case. 5085 Innerspring Mattress High quality.312 innerspring design Premium-grade cotton felt and highdensity urethane foam are intertufted to eliminate component shifting and to increase mattress life Durable 11-ounce vinyl cover is antibacterial, anti-static, acid-resistant and waterproof for easy use and care Equipped with two screened brass vents 5085-84 (not shown) is available for use with extender kit Model BARMATT Foam Mattress NEW Constructed of latex-free materials Durable 11-ounce vinyl cover is anti-bacterial and waterproof for easy use and care High quality 2.6 lb./cu. ft.-density foam provides comfortable, firm support FV5010 mattress comes compressed in a 12" x 12" x 37" box to reduce required storage space and to make delivery easier. Model no. MC0195 MC0065 FV5010 5085 5085-84 BARMATT Overall length 80" 80" 80" 80" 84" 80" Overall height 6" 6" 5.5" 6" 6" 7" Overall width 36" 36" 35" 35" 35" 42" Gauge 4" 4" Warranty 30 days 30 days 1 year 1 year 1 year 1 year

The Invacare Group I Therapeutic Support Surfaces are designed to aid in the prevention and treatment of pressure ulcers. Three types of modalities allow you to choose the right product for the individual user. Product types include alternating pressure overlays, static air overlays, and foam mattress replacements. All of these products are simple to use and easy to maintain. CareGuard SA Static Air Overlay Model no. CGSA1100 18 gauge, anti-microbial, medical grade vinyl Three-inch air cell height to reduce patient interface pressure Two inflation valves for use with hand pump (included) or electric inflator CPR release valve for rapid deflation required in the ICU Easy-to-adjust straps secure the overlay to any size mattress Designed to meet EO197 CareGuard 101 Home Care Mattress Model no. CG10180 Five zones allow the patient s body weight to be absorbed proportionally 1.8 lb., 33 ILD upper layer and 1.8 lb., 40 ILD lower layer combine to provide the maximum pressure reduction and durability Reversible head-to-foot with contour cuts to reduce shear Anti-microbial waterproof cover with a 70 denier top to reduce friction and a vinyl bottom to protect the mattress Designed to meet EO184 Therapeutic Support Surfaces CareGuard GM Gel Foam Mattress Overlay Model no. CGGFMO Reversible gel-foam core and multi-orientation capability for increased service life Durable aggressive base material with strong elastic corner securing straps reduce overlay movement Vapor permeable waterproof cover with low friction and shear Four large 2" thick gel bladders inside polyurethane foam mattress core 250 lb. maximum patient weight Designed to meet EO185 CareGuard APP Alternating Pressure Pad System Model no. CG9701 Advanced pump technology alternately inflates and deflates air cells Variable pressure setting for added patient comfort Pump can be mounted on the bed with built-in bracket 250 lb. maximum patient weight Designed to meet EO180 Code Model no. Weight Length Width Thickness Power Approval Warranty* Flammability CGSA1100 4 lb. 76" 33" 3" n/a n/a 6 months n/a Conforms to California CG10180 19 lb. 80" 35" 5" n/a n/a 2 years Technical Bulletin #117 CGFMO 55 lb. 76" 34" 3.5" n/a n/a 6 months n/a Pump: 3.5 lb. 10" 6" 4" n/a n/a 2 years CG9701 Pad: 4.6 lb. 118" 34" 2.5" 115V, 160 HZ UL-1431 30 days n/a * For manufacturer s defects

Overbed Tables Invacare overbed tables are practical, easy-to-use units suitable for both home and institution. The table height easily adjusts for comfort while reading, writing or eating. These tables feature an attractive walnut wood-grained laminate top with a T-molded edge that is designed to resist damage. The heavy gauge chrome-plated, tubular welded ensures durability, and the 1.5" casters ensure smooth mobility of the table in any direction. Auto-Touch Overbed Table Model no. 6417 Light upward touch on patented springloaded locking handle allows table to elevate freely Light downward touch on table top locks table in position Unique U base design permits use with chairs CareGuard Overbed Table Model no. 6400 Light upward touch allows table to elevate freely Light downward touch on table top locks table in position Economically priced Tilt-Top Overbed Table Model no. 6418 Adaptable tilt-top allows three angle positions in either direction using tilt-release lever Light upward touch allows table to elevate freely Light downward touch on table top locks it into position Model no. 6417 6418 6419 6400 Table top.75" h x 15" w x 30" l.75" h x 15" w x 30" l.75" h x 15" w x 30" l.75" h x 15" w x 30" l Base 15.5" w x 26" l 15.5" w x 26" l 15.5" w x 26" l 16.5" x 26.25" Height adjustment 29" - 45" 25.75" - 39" 29.5" - 44.5" 27" - 42" Weight 27 lb. 28 lb. 44 lb. 22 lb. Column/base/ support bracket 14/16/13 gauge 14/16/13 gauge 12/14/13 gauge 14/14/13 gauge Warranty 3 years limited 3 years limited 3 years limited 2 years limited Heavy-Duty Auto-Touch Overbed Table Model no. 6419 Heavy-duty construction and highpressure laminate for optimum durability Light upward touch on the counterbalanced release allows table to elevate freely Top lowers with slight pressure on release bar

Invacare is pleased to offer a line of traction equipment and accessories appropriate for home care use. We offer a fracture frame along with a full selection of traction accessories from which a complete personalized system can be built. The attending physician s instructions for selection and setup for this equipment should be followed explicitly. This product can be used to accommodate most prescribed home traction needs. Fracture Frame Model no. 7030 Modular system allows frame to meet requirements of most prescribed traction Chrome-plated steel components for superior strength Vinyl-padded brackets clamp to bed ends For use only on metal framed bed ends such as those on Invacare home care beds Model no. 7030 Overall height 60" Height adjustment n/a Length 96" Weight capacity 250 lb.. Shipping via truck Bars with Clamps 7830 Upright bar with single clamp, 60" 7841 Plain bar with double clamp, 36" Plain Bars Model no. Length 7810 96" 7826 36" Traction Arms with Clamps Model no. Length 7837 18" 7838 12" 7839 9" Grab Bar 7941 Grab bar with chain and clamp Bed Bracket Clamps 7950 Bed bracket, upper, complete 7953 Bed bracket, lower, with wall bumper 7954 Bed bracket, lower, complete Traction Cord 7605 Traction cord, 50 yards Water Weight Bag and Carrier Model no. Weight 7602 20-lb. bag 7603 Weight carrier Iron Weights and Carrier Model no. Weight 7971 1 lb. 7972 2 lb. 7975 5 lb. 7978 Weight carrier 14" Bumpers 17167X000 Plastic end cap bumper 7948 Wall bumper with horns 7949 Wall bumper post with clamp Traction Equipment and Bed Accessories Clamps 07800X001 Single-hinge clamp 7801 Nylon pulley clamp 7803 Double clamp Spreaders 7623 Cervical spreader bar, 12" 7624 Pelvic spreader bar, 17"