Industrial Equipment Rental & Service

Industrial Equipment Rental & Service

Maxstar STR 210 120-480 V INTRODUCING Unit provides maximum flexibility by automatically connecting to any input power while maintaining the best DC Stick welding performance in its product class. TIG (GTAW) TIG DC (GTAW-DC) Stick (SMAW) 907682 for the Power, Oil and Gas industries, Steel Producing and General Fabrication Model 907682 Welding Mode Input Power Welding Amperage Range Rated Output Phase TIG (GTAW) Stick (SMAW) Welding Mode Phase 3-phase 1-phase TIG (GTAW) 1-phase 3-phase 1-phase Stick (SMAW) 1-phase 208 480 V 1 210 A 120 V 1 210 A 208 480 V 5 210 A 120 V 5-100 A 210 A at 18.4 V, 3-phase 60% duty cycle 1-phase 125 A at 15 V, 60% duty cycle 160 A at 26.4 V, 3-phase 60% duty cycle 1-phase 90 A at 23.6 V, 60% duty cycle 1-phase 1-phase (continued) Amps input at Rated Load Output, 50/60 Hz Max, Open- 120 V 208 V 240 V 400 V 480 V KVA KW Circuit Voltage 14 12 7 6 5.2 4.9 24 20 12 10 4.9 4.9 22 2.6 2.6 15 13 8 6 5.5 5.2 26 22 13 11 5.3 5.3 23 2.8 2.8 80 VDC (11 VDC) General Model 907682 Weldable Metals Steel, Stainless Steel Current Type CC / CV, DC Dimensions H 13.6" x W 8.6" x D 19.5" Net STR: 36 lbs. Base/DX: 38 lbs. Industrial Equipment Rental & Service SuperiorToolRental.com MidlandTool.com 877-446-4352

XMT 350 CC/CV Portability and excellent arc performance make the XMT family the most popular in the industry. The XMT 350 CC/CV is the most popular model for its flexibility and simplicity. Air Carbon Arc Cutting and Gouging (CAC-A) MIG (GMAW) Pulsed MIG (GMAW-P) Flux Cored (FCAW) Stick (SMAW) TIG DC (GTAW-DC) General Model 907161014 Weldable Metals Aluminum, Specialty Metals, Steel, S.S. Carbon Diameter 1/4" Input Hz 50 / 60 Hz Current Type CC / CV, DC Dimensions H 17" x W 12" x L 20-3/4" 80 lbs. 907161014 Model 907161014 Input Power Three-phase Single-phase Input Voltage Limits 190 630 V 190 630 V Weld Output 350 A at 34 VDC, 60% duty cycle 300 A at 32 VDC, 60% duty cycle Voltage Range in CV Mode 10 38 V 10 38 V Amperage Range in CC Mode 5 425 A 5 425 A Rated Output 350 A at 34 VDC, 60% duty cycle 350 A at 34 VDC, 60% duty cycle Amps Input at Rated 208 V 230 V 400 V 460 V 575 V KVA KW 208 V 230 V 400 V 460 V 575 V KVA KW Load Output, 60 Hz 40.4 36.1 20.6 17.8 14.1 14.2 13.6 60.8 54.6 29.7 24.5 19.9 11.7 11.2 Max. Open-Circuit Voltage 75 VDC 75 VDC Output Connections Dinse or Tweco Dinse or Tweco XMT 350 CC CV 4 Pack Rack XMT 350 CC CV 6 Pack Rack XMT 350 CC CV 8 Pack Rack 4-pack 907585 6-pack 907406 8-pack 907585 (2) XMT 350 Rack 4 Pack Rack 6 Pack Rack 8 Pack Rack Model 907585 907406 907585 (2) Input Power to Rack 208 575 VAC, 50/60 Hz, 3-phase, 208 575 VAC, 50/60 Hz, 3-phase, 208 575 VAC, 50/60 Hz, 3-phase, with Auto-Line with Auto-Line with Auto-Line Welding Power Source XMT 350 CC/CV XMT 350 CC/CV XMT 350 CC/CV Air Carbon Arc Electrode Size Power Source XMT 350 XMT 350 XMT 350 Single Power Source (in.) Up to 5/16" Up to 5/16" Up to 5/16" Dimensions H: 59.375" W: 43" D: 34.375" H: 59.375" W: 43" D: 34.375" H: 59.375" W: 86" D: 34.375" 599 lbs. 759 lbs. 1198 lbs.

Big Blue 450 Duo CST The Big Blue 450 Duo CST is a rugged, compact, fuel efficient diesel welder/generator that provides 2 superior arcs in one economical package. Air Carbon Arc Cutting and Gouging (CAC-A) TIG DC (GTAW-DC) Stick (SMAW) General Model 907477 Weldable Metals Steel, S.S. Carbon Diameter 3/16" Input Hz 50 / 60 Hz Current Type DC Amperage Range 5 450 Weld Output CC Net Width W 26-1/4" x H 32" x L 56" Ship 1114 lbs. 907477 Model 907477 Weld Mode/Process CC/DC (Stick/TIG) CC/DC (Stick/TIG) Output Mode Separate (dual outputs) Paralleled (combined) Weld Output Range 5 225 A (each side) 5 280 A (one side only) 10 450 A Weld Output Rated at 122º USA Model 175 A, 27 VDC, 100% duty cycle USA Model 350 A, 27 VDC, 100% duty cycle Max. Open-Circuit Voltage 77 VDC 77 VDC Generator Power Output Rated at 122º F 3 phase: 12,000 watts, 240VAC, 60 HZ 1 phase: 10,000 watts, 120/240 VAC, 60 Hz continuous Sound Levels at Rated Output, 23 ft. 77 VDC 77 VDC Big Blue 800 Duo Pro Trailer Mounted Optional A complete multi-process & multi-operator welder / generator that delivers two independent pipe quality arcs in one complete package. Air Carbon Arc Cutting and Gouging (CAC-A) MIG (GMAW) Submerged Arc (SAW) Flux Cored (FCAW) Stick (SMAW) TIG DC (GTAW-DC) General Model 907587 Weldable Metals Steel, S.S. Carbon Diameter 1/2" Input Hz 50 / 60 Hz Current Type DC Amperage Range 20 800 Weld Output CC / CV Net Width 28-1/2" Net Height 46" Net Length 69-1/2" Net 1869 lbs. 907587 Model 907587 Weld Mode/Process CC/DC (Stick/TIG) CV/DC (MIG/FCAW) Output Mode Separate (dual outputs) Paralleled (combined) Separate (dual outputs Paralleled (combined) Weld Output Range 20 400 A 40 800 A 14 40 V 14 40 V Weld Output at 100% Duty Cycle 400 A at 36 V 700 A at 44 V 400 A at 34 V 750 A at 40 V Rated at 104º F (each side) 800 A at 38 V (each side) 800 A at 38 V Max. Open-Circuit Voltage 85 VDC 15 VDC Generator Power Output Rated at 104º F 3-phase: 27,000 W peak, 20,000 W continuous 1-phase: 15,000 W peak, 12,000 W continuous Sound Levels at Rated Output, 23 ft. Idle: 71.3 db (96.1 Lwa), 75.3 db at one meter from front panel Weld (800 A load): 78.9 db (103.7 Lwa), 82.8 db at one meter from front panel 2

Big Blue 350 PipePro 907428 Next-generation, rugged, low speed diesel welder/generator designed for the transmission pipeline contractor. Air Carbon Arc Cutting and Gouging (CAC-A) MIG (GMAW) TIG DC (GTAW-DC) Flux Cored (FCAW) Stick (SMAW) Trailer Mounted Included General Model 907428 Weldable Metals Steel, Stainless Steel Carbon Diameter 1/4" Input Hz 50 / 60 Hz Current Type DC Amperage Range 20 400 Weld Output CC / CV Net Width 26-1/4" Net Height 32" Net Length 56" Net 1018 lbs. Model 907428 Weld Mode/Process CC/DC (TIG) CC/DC (stick) CV/DC (FCAW/MIG) Weld Output Range 20 400 A 20 400 A 14 40 V Weld Output at 100% Duty Cycle Rated at 104º F Max. Open-Circuit Voltage 300 A at 32 VDC, 350 A at 27 VDC, 400 A at 24 VDC 85 VDC, 15 VDC Generator Power Output Rated at 104º F 12,000 watts peak, 10,000 watts continuous 1-phase, 84/42 A, 120/240 VAC, 60 Hz Sound Levels at Rated Output, 23 ft. Idle: 68.7 db (93 Lwa) Weld 72.1 db (97 Lwa) Air Carbon Arc Cutting and Gouging (CAC-A) MIG (GMAW) TIG (GTAW) Flux Cored (FCAW) Stick (SMAW) Plasma (PAC) Trailblazer 275 LP with Excel power, GFCI Trailblazer 325 Gas Trailblazer 325 Diesel 275-amp 300-amp 300-amp Cart Mounted Included 907691 907510 907566 Trailblazer welder/generators deliver unbeatable arc performance providing the smoothest, most stable arc in the industry. The Trailblazer exclusive Auto-Speed technology delivers superior runtimes, increased fuel efficiency, and improved welder/generator performance. No other compact machine in the 275-amp, 300-amp class delivers more welding power or more auxiliary power with better fuel efficiency and less noise for productive, profitable, quieter jobsites. Model 907691 Trailblazer 275 907510 Trailblazer 325 Gas 907566 Trailblazer Diesel Welding Mode CC/DC CV/DC CC/DC CV/DC CC/DC CV/DC Process Stick (TIG) MIG (FCAW) Stick (TIG) MIG (FCAW) Stick (TIG) MIG (FCAW) Amp / Volt Ranges 20 275 A 10 35 V 10 325 A 10 35 V 10 325 A 10 35 V Rated Weld Output at 104º F 275 A at 28 V, 100% duty cycle 325 A at 28 V, 100% duty cycle 325 A at 33 V, 100% duty cycle Single-Phase Generator Power Peak: 12,000 watts, 11,000 watts with LP Peak: 12,000 watts, 11,000 watts with LP Peak: 12,000 watts Continuous: 10,500 watts Continuous: 10,500 watts Continuous: 10,500 watts Sound Levels at Weld: 150 A load: 65 db (90 Lwa), Weld: 150 A load: 65 db (90 Lwa), Weld: 150 A load: 75 db (100 Lwa), Rated Output, 23 ft. 325 A load: 73.5 db (98.5 Lwa) 325 A load: 73.5 db (98.5 Lwa) 325 A load: 81.5 db (106.5 Lwa) General Weldable Metals Steel, Stainless Steel Steel, Stainless Steel Steel, Stainless Steel Carbon Diameter 1/4" 1/4" 1/4" Current Type DC DC DC Net Width 20" 20" 20" Net Height 28" 28" 28" Net Length 40.5" 40.5" 45.375" Net 459 lbs. 460 lbs. 620 lbs. 3

Welder/Power Distribution Panel SP-45-W Welder/Power Distribution Panel 45 KVA Distributes 120 and 208 volt 1-phase power Our SP-45-W is completely mobile, mounted on a 4-wheel cart with fork pockets and (4) lifting lugs mounted to the top corners of the cart. Primary voltage is 480/3 phase 100 amp, with a 60 amp 3 pole breaker to feed a 45 KVA transformer. The secondary power is 120/208 volt 200 amp stainless steel weather-tight enclosure panel with a circuit breaker viewing window. (10) 120 volt 20 amp G.F.C.I. duplex receptacles are provided for use of power tools and portable lighting. (2) 120/208 volt 50 amp twist-lock receptacles are also included for use with our SPB-6 (for use in more remote areas where power is needed, 50' or 100' span) Portable Power Center includes (6) 120 volt 20 amp G.F.C.I. individually protected receptacles, along with a breaker for each duplex and a 30 amp twist-lock receptacle for any larger equipment. (8) 120/208 volt 50 amp 4-pin receptacles with screw-on weatherproof covers, both are connected to 2-pole 50 amp circuit breakers. The SP-45-W and SPB-6 are all UL listed and NEMA 3R certified. SP-45-W (10) 120 volt 20 amp Hubbell G.F.C.I. duplex receptacles with spring-back weatherproof covers, all connected to 20 amp G.F.C.I. circuit breakers. (2) 120/208 volt 50 amp Hubbell twist-lock receptacles with spring-back weatherproof covers, both are connected to 50 amp G.F.C.I. circuit breakers. (8) 480 volt 60 amp 4-pin receptacles with screw-on weatherproof covers, both are connected to 2-pole 60 amp circuit breakers. 4

FLEXTEC 650X Multi-Process power for heavy-duty applications K3425-1 SIMPLE. RELIABLE. FLEXIBLE This multi-process welder delivers up to 815 amps of welding power for a variety of applications, including construction, shipbuilding and heavy fabrication. Embedded CrossLinc Technology drives welding control at the arc without an added cable to save costs, increase quality and enhance productivity and safety on the job site. The world-ready Flextec 650X will run on a wide range of available volt input power and is IP23 rated for outdoor operation and storage. Broad wire feeder compatibility is not an issue The Flextec 650X will operate with almost any Lincoln Electric wire feeder, tractor or mechanized system. Simple. Reliable. Flexible. Specify the Flextec 650X for your heavy-duty applications. Stick, TIG, MIG, Flux-cored, Submerged Arc, Gouging Model K3425-1 Input Power 380 / 460 / 575 / 3 / 50 / 60 Rated Output Current / Voltage / Duty Cycle 750A/44V/60% 650A/44V/100% GTAW: 750A/34V/60% GTAW: 650A/34V/100% Input Current at Rated Output 61/50/40 57/47/38 Output Range 10-815A GTAW: 10-815A SMAW: 15-815A Distribution Box FEATURES Makes connecting up to 10 Multi-Weld 350s quick and easy. Contains copper bus bar for connecting multiple pig-tails Four pig tails included. K1736-1 5

4-Pack Rack Flextec 650 Compact, Rugged and Complete Multi-Weld 350 K3144-1, Flextec 650 4-Pack Rack K4267-1 FEATURES One easy connection Allows power sources to be connected Individual fuses Provide overcurrent protection for each power source Two overhead lifting eyes, two fork lift slots, and four heavy duty optional casters Provide ease of portability Common disconnect Units have a 200 amp, 600 volt, 3-phase disconnect switch Fold Down fuse panel Makes it more convenient to access wiring and change fuses Flextec 650: Stick, TIG, MIG, Flux-Cored, Gouging Model K3144-1, Flextec 650 4-Pack Rack Output Connection Lug Rack Input Power {1} 380 / 460 / 575 / 3 / 50 / 60 Rated Output Current/Voltage/Duty Cycle {2} 650A /44V/100%-750A/44V/60% Rack Input Current @ Rated Output 202 / 167 / 103A Output Range 10-815 Amps LN-25X Full control of your system with no control cables FEATURES Remotely controls preset voltage without a control cable Industry-proven Maxtrac Wire Drive System provides reliable feeding and easy changeovers Trigger lnterlock switch provides operator comfort over long welds Arc Hour Meter for tracking maintenance and productivity Digital Meters display voltage, current and wire feed speed MIG, Flux-Cored Model K4267-1 Input Volts Output Capacity Current/Duty Cycle Flow Meter Miniflex K3972-3 Portable Fume Extraction System Stick (Light Duty), TIG, MIG, Flux-Cored (Light Duty) Model Miniflex K3972-3 Sound Level 80 dba Airflow CFM Low: 95 High:108 Power Rating HP 2.4 (1/2/motor) Filter Surface Area sq. ft. 118 Input Power Voltage/Phase/Hertz 120/1/50/60 Input Current 12.0A Dimensions H 29" x W 15.6" x L 16.8" 40 lbs. 15-110 VDC (50-113 Peak Range) 450A/60% Yes Wire Feed Speed Range ipm 50-700 Solid: 0.023-1/16" Wire Size Range Cored: 0.030-5/64" Aluminum: 0.035-5/64" Dimensions H 15" x W 8.7" x L 23.2" Approx 37 lbs. 6 Miniflex K3972-3 Connect Several DC+ Welders to One Power Supply The Multi-Weld 350 is a 350 amp, DC+ 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the Multi-Weld 350 offers an entirely new and better way to build large structures. This unique system offers a cleaner, safer job site, and allows operators to have high performance welding control right where they need it at the arc. FEATURES Independent arcs. Starting or stopping one Multi-Weld doesn t affect the welding of the others The Multi-Weld 350 is capable of continuous operation at 350 amps in 122ºF air temperature No control cables are needed. Single weld cable output from the power source to one or several Multi-Weld 350s Controls are located close to the operator for quick access High efficiency design uses less than half the power of other grid systems Lincoln CT Chopper Technology for quality welds with instant control of the arc for superior welding results Constant voltage (CV) for MIG or Flux-cored wire welding Constant current (CC) for stick welding or arc gouging Additional stick welding controls include hot start, arc force, electrode type selection (E7018 and E6010) Arc gouging capability with a single Multi-Weld 350 and up to 5/16" electrode, or with paralleled units for up to 700 amps of power using a 3/8" electrode (DC+ Processes Only) Stick, MIG, Flux-Cored, Gouging Model Multi-Weld 350 K1735-1 Input Volts Rated DC+ Output Current/Voltage/Duty Cycle Input Current Rated at DC Output (80V DC) Output Range K1735-1 80V DC (50-113 Peak Range) 350A / 34V / 100% DC+ 165A 15-40 Volts, 30-350 amps, Max. OCV: 78V Dimensions H 11.6" x W 10" x D 21.5" 59 lbs.

Classic 300 HE Excellent for Pipelines, Construction and Maintenance K3198-1 Stick, TIG, MIG (1), Flux-cored (1), Gouging Fuel Efficient Industrial Diesel Engine 3-cylinder, water-cooled, 1800 RPM engine Big fuel savings compared to previous engine! Kubota : 15% at 300A, 30% at low idle vs. Classic 300D Fuel gauge on control panel Pure DC Generator Welding Output Produces the welding arc preferred by pipeline operators and contractors for precise control of the arc in demanding code applications All Copper Windings Enhances arc stability for a really smooth, high performance arc Five Current Ranges with Overlap For stick welding and other processes where slope control is desired. Fine-tuning within each range 300 Amps Output @ 60% Duty Cycle Welds up to 7/32" Fleetweld 5P+ cellulosic and Excalibur low hydrogen electrode Model K3198-1 Description 300 Amp DC Arc Welder, All Copper Windings, Pure DC Power Generator Rated DC Output (1) NEMA Ratings 300A / 32V / 60%, 250A / 30V 100% Current/Voltage/Duty Cycle 90V DC, MAX OCV DC Current Fine 40-350 Amps Adjustment Range 220-Max. 160-240, 120-190, 80-130, Min.-90 Auxiliary Power (2) 3,000 Watts, 60 Hz, AC, 20 Amps @ 120V w/ sealed GFCI Module, 13 Amps @ 240V Dimensions H 37.1" x W 24.3" x L 62.8" To top of exhaust tube: 45.5" 1371 lbs. Vantage 500 Compact Case Get a 500 amp welder in a compact case; it s the same size as the Vantage 300 and 400. The use of a turbo-charged diesel engine with Lincoln Electric Chopper Technology makes this possible, Also the low weight makes the Vantage 500 Compact a great choice for truck bed installation where space and weight capacity are limited. Stainless steel panels offer added durability Select one of five welding process modes Plenty of AC Generator power Tier 4i Perkins diesel engine Stick, TIG, MIG, Flux-cored, Gouging Model K2686-4 Rated Output, Current/ Voltage/Duty Cycle 500A/40V/100%, 525A/38V/60% Output Range 30-525A DC, 40-300A Pipe, 20-250A DC TIG, 14-40V CV, 30-525A Gouge 3-Phase AC Power: 22 kw Peak, 20 kw Continuous 1-Phase AC Power: 13 kw Peak, 12 kw Continuous Dimensions H 37.1" x W 24.3" x L 62.8" To top of exhaust tube: 45.5" 1290 lbs. K2686-4 SAE - 500 Superior Choice for Critical Welds The SAE-500 are the preferred choice for their great arc performance, design simplicity, reliability and ruggedness! Designed especially for pipeline welding and field construction Stick, TIG, Flux-cored (with AV adapter) Gouging Model K4053-1 Applications Pipeline, Construction, Maintenance Output 80-575A DC Welding 3000 Watts AC Generator Rated Output Current/ Voltage / Duty Cycle Dimensions 500A / 40V / 60% H 45.8" x W 28" x L 83" To top of exhaust tube: 54.3" 2111 lbs. K4053-1 7

Welding Accessories 877-446-4352 SuperiorToolRental.com Welding Rod Stingers Grounds Welding Cable Fire Blankets 877-446-4352 MidlandTool.com 8

9 AUTHORIZED SERVICE CENTER Superior Tool Rental & Repair Facility All equipment is checked for safe and proper operation before leaving our shop. Thank you for selecting Superior Tool Rental & Repair for your rental equipment and service needs. Our goal is 100% customer satisfaction every time.

Light Tower Model CPLT V5+ Performance Data Rated frequency 60 Hz Rated voltage 240/120 V Rated power (PRP) 2.7 kw Operating temp. 14/122 ºF (min/max) Sound power @ 7m (LPA) db(a) 63 Engine Model Kubota Z482 EOA Tier 4 f Speed 1800 rpm. Rated net output (PRP) 3 kw Coolant Liquid cooled Diesel Number of cylinders 2 Alternator - Sincro Model Mecalte LT3-75 Rated output kva 4.5 Insulation / enclosure protection Class/IP H/23 Consumption Fuel tank capacity 28 gal. Runtime before refueling @ 4kW load h 150 Battery 45 Ah. 390 CCA Power output Aux power MCCB 1 kw Lights Floodlights 4 x LED Wattage 4 x 350 W Luminosity 0.5fc @7 acres Construction Trailer M Unibody trailer w/ 4 point leveling Tires 155R13 Tow hitch 2 inch ball / pintle combo Enclosure Heavy-duty polythylene canopy Dimensions and weight Dim. in transport L: 66" x W: 43" x H: 98" Dim. in operation L 114" x W: 91" x H: 296" 1544 lbs. HIGH PERFORMANCE, LED LUMINOSITY The CPLT V5+ comes with 4 + lamps x 350 kw that gives you even more durability and light coverage. LOW NOISE Sound level: 63 db(a) EASY SERVICE ACCESS Wide wing doors allow 100% access to the machine, including service components and drains. LONG FUEL AUTONOMY With Fuel efficiency of.56 GPH the 28 gallon fuel tank allows optimal run times between refueling SPILLAGE-FREE FRAME Environmentally friendly frame design prevents oil, fluids and fuel from leaking out and contaminating the ground. CPLT V5+ 10

Industrial Equipment Rental & Service SuperiorToolRental.com MidlandTool.com 877-446-4352