M A C H I N E T O O L S CIRCULAR SAWS

M A C H I N E T O O L S CIRCULAR SAWS

HORIZON BROWN 425 SA SEMIAUTOMATIC CIRCULAR SAW Clamping vice adjustable Pressure Table rotation handwheel for rapid and accurate adjustment of cutting angle. Absorption monitoring during work cycle and jog selector for manual functioning instead of automatic automatic variation of blade s ascent thrust to increase improves blade life Max. angled cuts DX and SX. (*) with inverter head motor 142 142 142 120 130 120 220x60 300x60 220x60 1.2 / 1.3 / 1.5 (4)* 12/16/24 (24 144)* 425 1030 1260 x 1715 x 1380 1200 CUTTING CAPACITY 1. wide work area completely devoid of obstacles 2. prograable head ascent 3. 3 cutting speeds or electronic adjustment of blade speed

SUPER BROWN 350 AP AUTOMATIC CIRCULAR SAW CONTROL PANEL SAW BLADE GUARD with infinitely variable blade speed to cut all types of metals SAFETY GUARD SWIVELLING OFF-CUT CLAMP VARIABLE SPEED RAPID CLAMPING VICE PNEUMATIC CONTROL PANEL HEAD LOCKING LEVER - 115 115 - - 95 90 - - 160 x 90 120 x 80-1.5 15 90 170 350 420 1300 x 1350 x 1600 950 Mechanism for the rotation of head block for angled cuts up to 45 left with locking lever - Pneumatic vice with removable anti-burr - Pneumatic cylinder for head movement, with brake for speed adjustment - Transmission by means of a double - expandable pulley for speeds variable between 18 and 93 rpm - Head tilting on adjustable self-lubricating bushings - 600 step feeder controlled by pneumatic cylinder - Repeater up to maximum of 9 steps so as to reach a total stroke of 5400 - Maximum opening of feeder collet = 160 - Prograable piece counter - Minimum scrap on final cut = 160 Feeder speed adjustment valve - Aeter - Reverser - Emergency push button with key and lockable switch on control panel - Blade lubrication-cooling system with electric pump - Coolant liquid vat with extractable pump for vat cleaning - Complete protection guard with rapid blade change system - Circular blade ø 350 - Blade cleaning roller - Instruction book for use and maintenance - Set of wrenches for the maintenance ACCESSORIES AVAILABLE ON REQUEST: Roller table for piece loading and unloading - Coolant liquid

SUPER BROWN 350 SA SEMIAUTOMATIC CIRCULAR SAW with infinitely variable blade speed to cut all types of metals SUPER BROWN 350/45 SA for cuts from 0 to 45 right SUPER BROWN 350/60 SA for cuts from 60 left to 45 right 110* 115 115 100* 90* 95 90 80* 110 x 80* 160 x 90 120 x 80 100 x 80* 1.5 15 90 170 350 200 / 255 1000 x 1500 x 1500 950 C A P A C I T Y C U T T I N G T E C H N I C A L D A T A (*) 350/60 can cut up to 60 left Mechanism for the rotation of head block for angled cuts up to 45 left with locking lever (for version 350/45). - Mechanism for the rotation of head block for angled cuts up to 60 left and 45 right with blocking lever (for version 350/60). - Pneumatic vice with removable anti-burr. - Pneumatic cylinder for head movement, with brake for speed adjustment. - Transmission by means of a double expandable pulley for speeds variable between 18 and 93 rpm. - Head tilting on adjustable self-lubricating bushings. - Reverser. - Drive pedal for semi-automatic cycle. - Emergency push button with key on control panel. - Blade lubrication-cooling system with electric pump. - Coolant liquid vat with extractable pump for vat cleaning. - Complete protection guard with rapid blade change system. - Piece support arm with sliding roller. - Bar stop with millimetric bar. - Circular blade ø 350. - Blade cleaning roller. - Pedestal in welded metal sheet, 49. - Instruction book for use and maintenance. - Set of wrenches for maintenance. Roller table for piece loading and unloading. - Coolant liquid.

SUPER BROWN 350 MRM MANUAL CIRCULAR SAW with infinitely variable blade speed to cut all types of metals INFINITELY VARIABLE SAW BLADE SPEED. The optimum cutting speed can be maintained even when the diameter of the saw blade has been reduced by several regrinds. SUPER BROWN 350/45 MRM Version with Manual Vice SUPER BROWN 350/45 MRP Version with Pneumatic Vice SUPER BROWN 350/60 MRM Version with Manual Vice SUPER BROWN 350/60 MRP Version with Pneumatic Vice (*) 350/60 can cut up to 60 left 110* 115 115 100* 90* 95 90 80* 110 x 80* 160 x 90 120 x 80 100 x 80* 1.5 15 90 170 350 180 / 185 / 235 / 240 900 x 1550 x 1850 950 Mechanism for the rotation of head block for angled cuts up to 45 left with locking lever (for versions 350/45 MRM and MRP). - Mechanism for the rotation of head block for angled cuts up to 60 left and 45 right with blocking lever (for versions 350/60 MRM and MRP). - Manual vice with rapid clamping and removable anti-burr (for versions MRM). - Pneumatic vice with removable anti-burr (for versions MRP). - Transmission by means of a double expandable pulley for speeds variable between 18 and 93. - Head tilting on adjustable self-lubricating bushings. - Reverser. - Emergency push button with key on control panel. - Safety switch for blade drive on lever hand grip. - Blade lubrication-cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. - Complete protection guard with rapid blade change system. - Piece support arm with sliding roller. - Bar stop with millimetric bar. - Circular blade ø 350. - Blade cleaning roller. - Instruction book for use and maintenance. - Set of wrenches for maintenance. Sectional pedestal in sheet metal, 34. - Pedestal in welded sheet metal, 49. - Roller table for piece loading and unloading. - Coolant liquid.

SUPER BROWN 2000 SA SEMIAUTOMATIC CIRCULAR SAW Sideways movement of the head for cuts at 45 on the vertical plane and for longitudinal cuts. 45 mitre cuts off the vertical 80 80 80-65 80 70-70 x 65 100 x 70 75 x 70-1.6 / 2.0 43 / 86 140 300 280 550 x 1200 x 1800 950 Safety switch for blade drive on lever hand grip. - Complete protection guard with rapid blade change system. - Emergency push button with key on control panel. - Two-speed switch. - Head tilting on adjustable self-lubricating bushings. - Mechanism for the rotation of head block for angled cuts up to 60 left and 45 right with blocking lever. - Lateral head movement unit for 45 cuts left and longitudinal cuts. - Support crank which allows to cut with the same ease and output big pieces (crank forward) and small pieces (crank back). - Manual vice with rapid clamping. - Refrigerating liquid vat with iersion pump to reduce overall dimensions - Bar stop with millimetric bar. - Circular blade ø 275. - Instruction book for use and maintenance. - Set of wrenches for maintenance. - Roller table for piece loading and unloading. - Coolant liquid.

SUPER BROWN 2000 MRM MANUAL CIRCULAR SAW SUPER BROWN 2000 MRM Version with Manual Vice SUPER BROWN 2000 MRP Version with Pneumatic Vice with infinitely variable blade speed for all types of metals Longitudinal cuts 80 80 80-65 80 70-70 x 65 100 x 70 75 x 70-1.6 / 2.0 43 / 86 140 300 180 550 x 1200 x 1800 950 Safety switch for blade drive on lever hand grip. - Complete protection guard with rapid blade change system. - Emergency push button with key on control panel. - Two-speed switch. - Head tilting on adjustable self-lubricating bushings. - Mechanism for the rotation of head block for angled cuts up to 60 left and 45 right with blocking lever. - Lateral head movement unit for 45 cuts left and longitudinal cuts. - Support crank which allows to cut with the same ease and output big pieces (crank forward) and small pieces (crank back). - Manual vice with rapid clamping. - Refrigerating liquid vat with iersion pump to reduce overall dimensions - Bar stop with millimetric bar. - Circular blade ø 275. - Instruction book for use and maintenance. - Set of wrenches for maintenance. Sectional pedestal in sheet metal, 34. - Pedestal in welded sheet metal, 49. - Roller table for piece loading and unloading. - Coolant liquid.

BROWN 300 SA SEMIAUTOMATIC CIRCULAR SAW with infinitely variable blade speed to cut all types of metals LOADING ROLLER TABLE (ACCESSORIES AVAILABLE UPON REQUEST) Barstop unit positionable upon millimetric rod: shoulder is adjustable according to section of piece to be cut. The unit can be tilted to ensure easy loading/unloading operations. 65 80 80-50 75 75-85 x 50 120 x 75 90 x 75-1.6 / 2.0 43 / 86 145 300 240 1000 x 1400 x 1400 950 UNLOADING ROLLER TABLE WITH BARSTOP (ACCESSORIES AVAILABLE UPON REQUEST) Mechanism for the rotation of head block for angled cuts up to 45 left and right with locking lever. - Pneumatic vice with removable anti-burr. - Pneumatic cylinder for head movement, with brake for speed adjustment. - Head tilting on adjustable self-lubricating bushings. - Reverser. - Drive pedal for semi-automatic cycle. - Emergency push button with key on control panel. - Blade lubrication-cooling system with electric pump. - Coolant liquid vat with extractable pump for vat cleaning. - Complete protection guard with rapid blade change system. - Piece support arm with sliding roller. - Bar stop with millimetric bar. - Circular blade ø 275 - Blade cleaning roller. - Pedestal in welded metal sheet, 49. - Instruction book for use and maintenance. - Set of wrenches for maintenence. Roller table for piece loading and unloading. - Coolant liquid.

BROWN 300 MRM MANUAL CIRCULAR SAW BROWN 300 MRM Version with Manual Vice BROWN 300 MRP Version with Pneumatic Vice 65 80 80-50 75 75-85 x 50 120 x 75 90 x 75 1.6 / 2.0 43 / 86 145 300 170 / 185 900 x 1400 x 1800 950 - C A P A C I T Y C U T T I N G T E C H N I C A L D A T A Clean cuts without vibration thanks to the innovative design and cushioned drive coupling. Mechanism for the rotation of head block for angled cuts up to 45 left and right with locking lever. - Pneumatic vice with removable anti-burr. - Pneumatic cylinder for head movement, with brake for speed adjustment. - Head tilting on adjustable self-lubricating bushings. - Reverser. - Drive pedal for semi-automatic cycle. - Emergency push button with key on control panel. - Blade lubrication-cooling system with electric pump. - Coolant liquid vat with extractable pump for vat cleaning. - Complete protection guard with rapid blade change system. - Piece support arm with sliding roller. - Bar stop with millimetric bar. - Circular blade ø 275 - Blade cleaning roller. - Pedestal in welded metal sheet, 49. - Instruction book for use and maintenance. - Set of wrenches for maintenence. Sectional pedestal in sheet metal, 34. - Pedestal in welded sheet metal, 49. - Roller table for piece loading and unloading. - Coolant liquid.

PERRIS 350 AP AUTOMATIC CIRCULAR SAW high speed cut-off machine for aluminium light alloys 95 100 95 50 95 95 90 50 130 x 55 155 x 90 130 x 55 150 x 40 2.2 2400 / 3400 177 350 400 1300 x 1350 x 1600 950 Mechanism for the rotation of head block for angled cuts up to 45 left, 45 right and 45 off the vertical - Two pneumatic vices adjustable both lengthwise and laterally Pneumatic cylinder for head movement, with brake for speed adjustment - Two speeds of blade rotation obtainable by means of inversion of the pulleys - Perfectly balanced head, tilting upon shielded ball bearings - 600 step feeder controlled by pneumatic cylinder - Repeater up to maximum of 9 steps to reach a maximum of 5400 - Maximum opening of feeder collet = 160 - Prograable piece counter - Minimum scrap on final cut = 360 - Feeder speed adjustment valve - Aeter - Emergency push button with key and lockable switch on control panel - Vaporizer - Complete protection guard with rapid blade change system. - Instruction book for use and maintenance - Set of wrenches for maintenence - Blade not supplied Piece loading and unloading table - Vertical pneumatic anti-burr vice - Coolant liquid - Widia blade

PERRIS 350 SA SEMIAUTOMATIC CIRCULAR SAW high speed cutting-off machine for aluminium and light alloys LOADING ROLLER TABLE (ACCESSORIES AVAILABLE UPON REQUEST) 95 100 95 55 95 95 90 50 130 x 55 155 x 90 130 x 55 150 x 40 2.2 2400 / 3400 177 350 215 600 x 1100 x 1300 790 Mechanism for the rotation of head block for angled cuts up to 45 left, 45 right and 45 off the vertical. - Two pneumatic vices adjustable both lengthwise and laterally. - Pneumatic cylinder for head movement, with brake for speed adjustment. - Two speeds of blade rotation obtainable by means of inversion of the pulleys. - Perfectly balanced head, tilting upon shielded ball bearings. - Drive pedal for semi-automatic cycle. - Emergency push button with key on control panel. - Vaporizer. - Complete protection guard with rapid blade change system. - Bar stop with millimetric bar positionable on both sides of machine. - Pedestal in welded metal sheet, 49. - Instruction book for use and maintenance. - Set of wrenches for maintenence. - Blade not supplied. Roller table for piece loading and unloading. - Vertical pneumatic anti-burr vice. - Coolant liquid. - Widia blade

PERRIS 350 MRM MANUAL CIRCULAR SAW PERRIS 350 MRM Version with Manual Vice high speed cutting-off machine for aluminium and light alloys PERRIS 350 MRP Version with Pneumatic Vice 95 120 95 50 95 110 90 50 130 x 55 155 x 90 130 x 55 150 x 40 2.2 2400 / 3400 177 350 160 / 165 750 x 1050 x 1750 790 Mechanism for the rotation of head block for angled cuts up to 45 left, 45 right and 45 off the vertical. - Two manual vices adjustable both lengthwise and laterally (for version MRM). - Two pneumatic vices adjustable both lengthwise and laterally (for version MRP). - Two speeds of blade rotation obtainable by means of inversion of the pulleys. - Perfectly balanced head, tilting upon shielded ball bearings. - Emergency push button with key on control panel. - Safety switch for blade drive on lever hand grip. - Blade lubrication-cooling system with membrane pump. - Complete protection guard with rapid blade change system. - Bar stop with millimetric bar positionable on both sides of machine. - Instruction book for use and maintenance. - Set of wrenches for maintenance. - Blade not supplied. Sectional pedestal in sheet metal, 34. - Pedestal in welded sheet metal, 49. - Piece loading and unloading table. - Vertical pneumatic anti-burr vice (for version MRP). - Coolant liquid. - Widia blade.

BROWN 250 MANUAL CIRCULAR SAW quality and durability sturdy and compact DOUBLE BALL BEARING SUPPORT OF BLADE DRIVE. Minimises vibration for superior cutting performance and longer machine life. Maximum piece support even for the shortest cut lengths - 70 70 - - 60 60 - - 100 x 50 70 x 50-0.8 / 1.1 37 / 74 102 250 91 450 x 650 x 1550 900 Mechanism for the rotation of head block for angled cuts up to 45 left with locking lever. - Manual vice with removable anti-burr. - Lockable switch on control panel. - Safety switch for blade drive on lever hand grip. - Blade lubrication-cooling system with electric pump. - Coolant liquid vat with extractable pump for vat cleaning. - Complete protection guard with rapid blade change system. - Bar stop with millimetric bar. - Circular blade ø 200. - Instruction book for use and maintenance. - Set of wrenches for maintenence. Sectional pedestal in sheet metal, 19.5. - Coolant liquid.

ADB 142 M MANUAL ORBITAL DEBURRING MACHINE Max dimension with ø 300 brush (standard) round...110 square... 80 Max dimension with ø 380 brush (optional) round...142 square...100 Brush speed with inverter...700 1700 r.p.m. Installed power...kw 4,35 weight...kg 520 Dimensions...1100x650x1400

ARFO BROWN universal milling machine for tubes and sections many operations with great speed Machine equipped for drilling bores on sections of any kind. Milling of tube end. The machine works at 90 in respect piece axis. TECHNICAL DATA Max. diameter of the milling cutter for solids...20 Max. diameter of the milling cutter for tubes...42 Max. stroke of the vice carriage...220 Max. stroke of the milling head...130 Three phase motor...0.75 / 1.1 Two-speeds...1430 / 2800 Milling cutter...500 / 650 / 980 / 1270 / 1750 / 2350 / 3400 / 4620 Maximum vice opening for cylindrical workpieces...140 Maximum vice opening for prismatic workpieces...155 Vertical stroke of vice...70 Rotation of vice right and left... 45 / 90 Dimensions...800 x 1000 x 900 Weight...257 SLOT MILLING MACHINE: The machine has been designed to perform slotting and milling operations on sections, both of steel or non- ferrous material. It is particularly useful for recessing angle iron or extrusions to accept locks, catches, etc. It can also be used to advantage for performing small milling operations on mechanical component parts and as a milling, drilling and centering machine. The outstanding feature of this machine is its versatility and the various movements make many machining operations possible with speed and efficiency. All movements are quick and controlled by adjustable stops, thus enabling repetitive accurancy on production. The cutting head is fitted on a movable support arm that rotates from 0 to 90 around the vice, thereby allowing milling operations at an angle to the axis of the workpiece. Locking of the head and carriages on the Arfo Brown machine are rapidly and easily performed and therefore setting up time is reduced to a minimum.

Ed.11/2008 SINCE 1948 MACHINE TOOLS FOR CUTTING BENDING AND END FORMING OF METAL TUBES AND SECTIONS BRANCHES PEDRAZZOLI AB Verkstadsgatan, 3 S-441 57 ALINGSÅS SWEDEN Tel. +46.322.633560 Fax. +46.322.637744 pedrazzoli@swipnet.se www.pedrazzoli.se IBP FRANCE Sarl HEDLEY PARCS - Z.A. du Rond debel Air 195, Rue Lavoisier 77240 CESSON LA FORET FRANCE Tel. +33.1.64897510 Fax +33.1.64897511 www.pedrazzoli.fr PEDRAZZOLI TUBE TECHNOLOGY LTD. Lawson Grove Plymouth Pl9 7qj UK TEL/FAX +44 01752 302734 www.pedrazzoli-tt.com info@pedrazzoli-tt.com PEDRAZZOLI USA LLC UNIT C, 1951 S. PARCO AVENUE ONTARIO, CA 91761 USA TEL: 909-989-1814 Fax: 909-989-1875 info@pedrazzoliusa.com www.pedrazzoliusa.com PEDRAZZOLI EAST EUROPE Spol. s r.o. Eszterhazyovcov 1407 92401 Galanta SLOVAK REPUBLIC Tel. +421 31 783 80 11 Fax +421 31 780 54 73 pedrazzoli.trade@stonline.sk PEDRAZZOLI MÁQUINAS E EQUIPAMENTOS DO BRASIL LTDA. Rua Giácomo Zatti, nº 2565 Bairro Nossa Senhora de Fátima 95.043-290 Caxias do Sul-RS BRASIL Tel/Fax: +55.54.3224 5075 pedrazzolibrasil@terra.com.br P E D R A Z ZO L I - I B P s. p. a. V i a l e Pe c o r i G i r a l d i, 5 1-5 3 C. P. 2 3 9 3 6 0 6 1 B A S S A N O D E L G R A P PA ( V I C E N Z A ) I TA LY Te l. + 3 9. 0 4 2 4. 5 0 9 0 1 1 Fa x + 3 9. 0 4 2 4. 5 0 9 0 4 9 e - m a i l : i b p e x p @ p e d r a z z o l i. i t w e b : w w w. p e d r a z z o l i. i t