Components for Machine Building. Power Feed Units

Components for Machine Building Power Feed Units

Standard and Custom Components to Fit Your Needs Exactly If you re building equipment to drill, tap, chamfer or thread, Hause Machines can help you create a machine that will fulfill your most demanding requirements. Our vastly expanded product line includes a broad array of components, and the selection is constantly growing. Building on a long tradition of excellence, Hause also renewed our commitment to quality, value and service. With product warranties ranging from one year to five years, standard Hause components are available for a wide range of manufacturing functions. Off-the-shelf type components: Drilling Units Tapping Units Indexers Multiple Spindle Heads Drill Presses and Tap Presses Custom Components Although one of our standard components may fulfill your requirements, our experienced engineering group is ready to develop a custom component that will fit your production needs exactly. We ll draw from a wide-range of proven solutions and new technologies to solve your problems and increase your productivity. Ballscrew Units Drilling Units Tapping Units Multi Spindle Heads Drill Presses and Tap Presses Columns Risers Bases Visit Hause Machines on the Web To see our full line of engineered solutions and to learn more about how Hause can help you solve manufacturing problems please visit our home on the World Wide Web. The Web site is an exciting development at Hause. We are using it for rapid communication with customers, troubleshooting, electronic commerce and more. Come see what Hause can do for you at www.hausemachines.com. Table of Contents How To Read This Catalog... 3 How To Specify And Code Hause Units... 4 Pneumatic Drilling Units (Metric)... 5-8 Air Hydraulic Drilling Units (English)... 9-11 Hydraulic Drilling Units (English)... 12-15 Hydraulic Drilling Units (Metric)... 16-21 Lead Screw Tapping Units (English)... 22-27 Tapping Units (Metric)... 28-32 Drill-Tapping Units (Metric)... 33-34 Notes... 35 Custom Add-Ons For English Units... 36-49 -Spindles... 36-37 -Drives... 38-39 -Belts/Pulleys... 40-41 -Motors... 42-44 -Belt Housings... 45 -Specials (Feed Control Valves)... 46 -Specials (Support Assemblies)... 47-49 Spindle Options For Metric Units... 50-54 Worksheet/Order Form... 55 Worksheet For Metric Units... 56 Worksheet For English Units... 57 Technical Information... 58-59

HOW TO READ THIS CATALOG Hause Machines, Inc. is pleased to provide you this catalog of their power feed unit line. The catalog is sectioned in two ways: Black Titled Pages fully customizable units with English dimensions Red Titled Pages standard off the shelf type units with Metric dimensions Second, the units are sectioned by feed type: Pneumatic Air Hydraulic Hydraulic Lead Screw You will find that the larger you go in horsepower and thrust requirements, the deeper into the catalog you will go. Additional pages cover the Add-Ons for the English units like the spindles, drives, belts/pulleys, motors, belt housings, and Specials pages for adaptations like bearing supports, slide supports and dual feed manifolds, as examples. Pages are supplied for the spindle choices on the Metric units as well, with referenced models which apply to each spindle listed. The last several pages give detailed technical specifications to figure drilling thrust, torque and horsepower, along with general guidelines for speeds and feeds. In order to specify the appropriate unit for the application, it is best to determine your needs in the following manner. (If assistance is required, please contact Hause Machines and a sales person will assist you in specifying the correct unit for your needs.) After completion of this short exercise, you will be able to use the catalog and customize your unit on the order form. Following is an example: Model Spindle Drive Belt/Pulley Motor Belt Housing Special 2427 BE A A N C2 Worksheets are supplied for your use. We suggest using them with an application or two, which will be a quick reminder next time you need to order a unit. If you have any questions, we invite you to contact Hause Machines Sales Department. A staff member will be happy to assist you in selecting the unit best suited to your application. Order Flow Chart 1. Application Drill diameter or tap size and pitch Material to be machined Tooling to be used Stroke required 2. Determine Parameters Thrust and/or torque, tool feeds and speeds Horsepower required RPM requirements 3. Choose Model Consider all factors and parameters required Choose model which covers all (Could be more than one) 4. Choose Spindle (Pages 36-37) Most commonly used by customer or use type frequently Fits application best Size appropriate for the tool Consider torque required 5. Choose Drive (Pages 38-39) Consider RPM s required Consider torque required If direct drive is desired, see #6. 6. Choose Pulley System or Direct Drive (Pages 40-41) Consider RPM s required Horsepower to be transmitted Additional RPM requirements/ step pulleys vs. timing pulleys 7. Choose Motor (Pages 42-44) Consider horsepower and RPM s needed 8. Choose Belt Housing, if applicable (Page 45) Mounting Vertical or horizontal application Motor and pulley sizes Orientation of housing www.hausemachines.com 3

HOW TO SPECIFY AND CODE HAUSE UNITS Hause Power Feed Units (English dimensions) can be completely and accurately described by a model number consisting of coded symbols. To develop a model number, select only those symbols that represent the options required and place them in the sequence indicated below. Model Number (XXXX) Spindle (XX) Description Pg. # Sym. Type Air Hydraulic 9 to 11 2 Hydraulic 12 to 15 6 Lead Screw (Air Rapid) 22 to 23 3 Lead Screw (Hyd. Rapid) 24 to 25 5 Lead Screw (No Rapid) 26 to 27 7 Stroke Length Specify in Inches Model # As used by Hause internally. Pick the model that best fits your needs. Description Pg.# Sym. Description Pg.# Sym. Flange 36 AA 3/4 Adjustable Adapter 37 AY Piloted Slot 36 AB 3/4 Adjustable Adapter - Extra Long 37 AZ Piloted Slot - Lead Screw 36 AC 1 Adjustable Adapter 37 BA Piloted Slot - High Torque 36 AD 1 Adjustable Adapter - Short 37 BB Piloted Slot - High Torque (L.S.) 36 AE 1 Adjustable Adapter - Extra Long with 4 37 BC #25 ER Collet Socket 36 AF 1 Adjustable Adapter - Extra Long with 6 37 BD #32 ER Collet Socket 36 AG 1-1/16 Adjustable Adapter 37 BE #33 Jacobs Taper 36 AH 1-1/16 Adjustable Adapter - Extra Long 37 BF #33 Jacobs Taper Extended 36 AI 1-1/16 Adjustable Adapter - Quick Change 37 BG #33 Jacobs Taper Extra Long 36 AJ 1-1/16 Adjustable Adapter - Quick Change (L.S.) 37 BH #2 Morse Taper 36 AK 1-1/4 Adjustable Adapter 37 BI #2 Morse Taper Extended 36 AL 1-3/8 Adjustable Adapter - Quick Change 37 BJ #2 Morse Taper Quill Support 36 AM 1-3/8 Adjustable Adapter 37 BK #2 Morse Taper High Speed 36 AN 1-3/8 Adjustable Adapter - Extra Long 37 BL #2 Morse Taper Series A 36 AO 1-3/8 Adjustable Adapter - High Torque 37 BM #2 Morse Taper Series A Ext. 36 AP 1-3/8 Adjustable Adapter - High Torque Extra Long 37 BN #3 Morse Taper 36 AQ 1-1/2 Adjustable Adapter 37 BO #3 Morse Taper High Torque 36 AR 1-1/2 Adjustable Adapter - Extra Long 37 BP #3 Morse Taper High Torque Ext. 36 AS 1-1/2 Adjustable Adapter - High Torque 37 BQ #4 Morse Taper 36 AT 1-7/8 Adjustable Adapter 37 BR #4 Morse Taper Extended 36 AU 1-7/8 Adjustable Adapter - Extra Long 37 BS #4 Morse Taper High Torque 36 AV 1-7/8 Adjustable Adapter - High Torque (L.S.) 37 BT #4 Morse Taper Lead Screw 36 AW Special 37 SP Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X X XX XX XX Drive (X) Description Pg.# Sym. Description Pg.# Sym. Inline Shaft Drive 38 A 1-1/8 Direct Drive 39 N High Torque 38 B 1-3/8 Direct Drive 39 O Coolant Through 38 C 1-3/8 Direct Drive - High Torque 39 P Draw Bar 38 D 14mm Direct Drive 39 Q Draw Bar with Grease Port 38 E 19mm Direct Drive 39 R Planetary Reduction 6:1 38 F 24mm Direct Drive 39 S Planetary Reduction - High Torque 38 G 28mm Direct Drive 39 T Coolant Through 38 H 2.9:1 Reduction Drive 39 U Hi-Lo Reduction - Standard 38 I 4.2:1 Reduction Drive 39 V Hi-Lo Reduction - High Torque 38 J 5.7:1 Reduction Drive 39 W 5/8 Direct Drive 39 K 2.9:1 Reduction Drive - High Torque 39 X 3/4 Direct Drive 39 L 4.2:1 Reduction Drive - High Torque 39 Y 7/8 Direct Drive 39 M 5.7:1 Reduction Drive - High Torque 39 Z Belts/Pulleys (X) Description Pg. # Sym. 5 Step 3V Section Pulleys 40 to 41 A 5 Step B Section Pulleys 40 to 41 B 4 Step B Section Pulleys 40 to 41 C 4 Step Pulley on Motor; 5 Step Pulley on Driven Shaft 40 to 41 D 4 Step Pulley on Motor Only (For use with I or J Hi-Lo Drive) 40 to 41 E 5 Step Pulley on Motor Only (For use with I or J Hi-Lo Drive) 40 to 41 F B Section Belt and Pulley (Specify RPM) 40 to 41 G Timing Belt and Pulley (Specify RPM) 40 to 41 H Motors (XX) Belt Housings (XX) Description Pg. # Sym. Note: Motors are ball bearing, enclosed NEMA C Flange Mounted, 230/460 volt, 42 A 3 phase, 60 Hertz. Maximum motor size is limited to HP transmitted on Belts/Pulley chart if using step pulleys or by.009 HP/Rev for standard drives and spindles,.055 to to HI/Rev on HT drives and spindles or by the 8-1/2 flange Ø if using our belt housing. 44 QQ Description Pg. # Sym. Type Overhead 45 A Small Extended 45 B Extended 45 C Orientation Top 45 1 Length Right 45 2 Bottom 45 3 Left 45 4 Specials (XX) Description Pg. # Sym. Feed Control Valve Dual Feed Manifold 46 V1 Feed Control Valve Skip Feed Cam Bar 46 V2 Spindle Support Assembly 47 SA1-SA2 Right Angle Milling Attachment 47 SA3-SA4 Heavy Duty Boring Adaption With Roller Bearings 47 SA5-SA6 Heavy Duty Boring Adaption With Tapered Bearings (TB) 48 SA7-SA8 4 Stroke High Speed Boring Spindle 48 SA9 Heavy Duty Milling Adaption with (TB) and Thru Coolant 48 SA10 Heavy Duty Right Angle Milling Head 49 SA11 Support Quill and THK Slide Assembly 49 SA12-SA13 4 www.hausemachines.com

PNEUMATIC DRILLING UNIT Model FD3-55 Specifications (Unit: metric) Pneumatic Pressure 55 ~ 85 P.S.I. Drilling Capacity 3/16 (steel) 70 P.S.I. Chuck Type ER-16-3/8, JT1-1/4, JT2-3/8 Power 0.5HP-2p or 4p, 200V/440V-60HZ Max. Revolution/Minute 6,000RPM Weight 45 lb Overall Stroke 2.25 Drilling Stroke 1 or 2 Cylinder Diameter 2 Cylinder Area Forward 2.45 IN 2, Backward 1.1 IN 2 Thrust Force 174 lb @ 70 P.S.I. Transmission Pulley V-SHAPE, 189J, 201J Features RPM and chuck type should be given when placing order. There are two feed strokes, 1 and 2, to choose from. Selection of pneumatic or electrical micro switch. Motor and pulley can be mounted around the circle in 45 degree interval. Consumption Parts Spindle Bearing Pulley Bearing O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover 6002Zx2, 6001ZZx1 6203ZZx2 GLY-40x1, N-50x1, DKB-40-52-6 OSY-50x2 P-22x1, P-22Ax1, SER22 O-Ring for Sleeve d1-50x2 Spindle Options (See page 50 for drawings and dimensions) ER16 Pg. 50 JT1 Pg. 50 JT2 Pg. 50 www.hausemachines.com 5

PNEUMATIC DRILLING UNIT Model FD3-80 Features RPM and chuck type should be given when placing order. There are two feed strokes, 1 and 2, to choose from. Capable of ±.0005 with short dwell. Motor and pulley can be mounted around the circle in 45 degree interval. Specifications (Unit: metric) Pneumatic Pressure 55 ~ 85 P.S.I. Drilling Capacity 3/16 (steel) 70 P.S.I. Chuck Type ER-16-3/8, JT1-1/4, JT2-3/8 Power 0.5HP-2p or 4p, 200V/440V-60HZ Max. Revolution/Minute 6,000RPM Weight 48 lb Overall Stroke 2.25 Drilling Stroke 1 or 2 Cylinder Diameter 2 Cylinder Area Forward 2.45 IN 2, Backward 1.1 IN 2 Thrust Force 174 lb @ 70 P.S.I. Transmission Pulley V-SHAPE, 189J, 201J 6 Spindle Options (See page 50 for drawings and dimensions) ER16 Pg. 50 JT1 Pg. 50 JT2 Pg. 50 Consumption Parts Spindle Bearing Pulley Bearing O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover O-Ring for Sleeve 6002Zx2, 6001ZZx1 6203ZZx2 GLY-40x1, N-50x1, DKB-40-52-6x1 OSY-50x2 P-22x1, P-22Ax1, SER22x1 d1-50x2 www.hausemachines.com

PNEUMATIC DRILLING UNIT Model FD55-80 Specifications (Unit: metric) Pneumatic Pressure 55 ~ 85 P.S.I. Drilling Capacity 5/16 (steel) 70 P.S.I. Chuck Type ER-20-1/2, JT6-1/2 Power 0.5HP-2p or 4p, 1HP-2P or 4P, 200V/440V-60HZ Max. Revolution/Minute 5,000RPM Weight 84 lb Overall Stroke 3 Drilling Stroke 1 or 2 Cylinder Diameter 2.5 Cylinder Area Forward 3.74 IN 2, Backward 1.8 IN 2 Thrust Force 265 lb @ 70 P.S.I. Transmission Pulley V-SHAPE, 201J, 220J Features RPM and chuck type should be given when placing order. There are two feed strokes, 1 and 2, to choose from. Equipped with internal electrical micro switch. Stroke and stopper adjustment can be done in one combined step. Motor and pulley location can be mounted around the circle in 45 degree interval. Consumption Parts Spindle Bearing a. 6004Zx2, 6003ZZx1 b. 7004x2, 7003x1 Pulley Bearing 6005ZZx1, 6205ZZx1 O-Ring for Front Cover P-50x1, G-65x1, DKB-50, 62,7x1 O-Ring for Piston OSY-63x2 O-Ring for Rear Cover P-30x2, G-40x1, G45x1 Spindle Options (See page 50 for drawings and dimensions) JT6 Pg. 50 ER20 Pg. 50 www.hausemachines.com 7

PNEUMATIC DRILLING UNIT Model FD56-100 Features RPM and chuck type should be given when placing order. There are two feed strokes, 1 and 2, to choose from. Equipped with internal electrical micro switch. Capable of ±.0005 with short dwell. Motor and pulley location can be mounted around the circle in 180 degree interval. Specifications (Unit: metric) Pneumatic Pressure 70 ~ 85 P.S.I. Drilling Capacity 1/2 (steel) 70 P.S.I. Chuck Type ER-20-1/2, JT6-1/2 Power 1HP-2p or 4p, 2HP-2p or 4p, 220V/440V-60HZ Max. Revolution/Minute 3,800RPM Weight 125 lb Overall Stroke 4 Drilling Stroke 1 or 2 Cylinder Diameter 2.5 Cylinder Area Forward 6.70 IN 2, Backward 4.75 IN 2 Transmission Pulley Thrust Force a. A2-O.D.-4 b. H.T.D-5M-62T c. A3-O.D.-5-4.3-3.5 475 lb @ 70 P.S.I. 8 Spindle Options (See page 50 for drawings and dimensions) ER20 Pg. 50 JT6 Pg. 50 AS22 Pg. 50 ER25 Pg. 50 JT6 Multi Pg. 50 Consumption Parts Spindle Bearing Pulley Bearing O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover a. 32005x1, 6005Zx1, 32004x1, 6004Zx1 b. 7005x2, 7004x2 a. 6008Zx1, 51208x1 or 51108x1 b. 7008x2 P-58x2, G-80x2, UHS-58x1 OSY-80x2, G-45x1, P-30x1 P-30x2, G-75x1 www.hausemachines.com

AIR HYDRAULIC DRILLING UNIT Models 2426, 2427, 2446, 2447, 2498 Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Oil No. Adv./Ret. Dia. Spindle Spindle Feed Filler @ 80 psi Speed Speed Style 2426 680/280 4 3.500 6000 120 Yes Pressurized 2427 680/280 4 3.500 6000 120 No Pressurized 2446 680/280 4 3.500 6000 120 Yes Pressurized 2447 680/280 4 3.500 6000 120 No Pressurized 2498 680/280 4 3.500 6000 120 Peck Feed Pressurized Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 2427 BE A A N C2 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 2427-BE-A-A-N-C2 This code specifies an Air Hydraulic Drilling unit (Model No. 2427) with a 4 stroke. Accessorizing this unit is a 1-1/16 Adjustable Adapter Spindle, Inline Shaft Drive, 5-Step 3V Section Pulley, a 2 HP (1800 RPM) Nema C Flange Mounted Motor, mounted to the right side on an Extended Belt Housing. Features Concentric construction. Pressure compensating feed valves. Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Note: Models 2426-2427 are for horizontal type applications and Models 2446-2447 are for vertical type applications. The 2498 can be used vertically or horizontally. Feed rates Adv: Adjustable from 3/8 to 125 per minute. Ret: Adjustable from 3/8 to 125 per minute. Rapid travel 1000 I.P.M. approx. www.hausemachines.com 9

AIR HYDRAULIC DRILLING UNIT Models 2626, 2627, 2646, 2647, 2698 Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Oil No. Adv./Ret. Dia. Spindle Spindle Feed Filler @ 80 psi Speed Speed Style 2626 680/280 6 3.500 6000 120 Yes Pressurized 2627 680/280 6 3.500 6000 120 No Pressurized 2646 680/280 6 3.500 6000 120 Yes Pressurized 2647 680/280 6 3.500 6000 120 No Pressurized 2698 680/280 6 3.500 6000 120 Peck Feed Pressurized Features Concentric construction. Pressure compensating feed valves. Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Note: Models 2626-2627 are for horizontal type applications and Models 2646-2647 are for vertical type applications. The 2698 can be used vertically or horizontally. Feed rates Adv: Adjustable from 3/8 to 125 per minute. Ret: Adjustable from 3/8 to 125 per minute. Rapid travel 1000 I.P.M. approx. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 2646 AT F F M A1 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 2646-AT-F-F-M-A1 This code specifies an Air Hydraulic Drilling unit (Model No. 2646) with a 6 stroke. Accessorizing this unit is a #4 Morse Taper Spindle, Planetary Reduction 6:1 Drive, a 2 HP (1200 RPM) Nema C Flange Mounted Motor, mounted to the top on an Overhead Belt Housing. 10 www.hausemachines.com

AIR HYDRAULIC DRILLING UNIT Models 2196, 2197, 2198 Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Oil No. Adv./Ret. Dia. Spindle Spindle Feed Filler @ 80 psi Speed Speed Style 2196 680/280 10 3.50 6000 120 Yes *Filler Valve 2197 680/280 10 3.50 6000 120 No *Filler Valve 2198 680/280 10 3.50 6000 120 Peck Feed Pressurized *Pressurized oil filler optional Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 2197 BK A A N B2 SA1 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 2197-BK-A-A-N-B2-SA1 This code specifies an Air Hydraulic Drilling unit (Model No. 2197) with a 10 stroke. Accessorizing this unit is a 1-3/8 Adjustable Adapter Spindle, Inline Shaft Drive, 5-Step 3V Section Pulley, a 2 HP (1800 RPM) Nema C Flange Mounted Motor, mounted to the right side on a Small Extended Belt Housing and accompanied by a Special 4 Spindle Support Assembly. Features Concentric construction. Pressure compensating feed valves. Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Other options available. All models can be used vertically or horizontally. Feed rates Adv: Adjustable from 3/8 to 125 per minute. Ret: Adjustable from 3/8 to 125 per minute. Rapid travel 1000 I.P.M. approx. www.hausemachines.com 11

HYDRAULIC DRILLING UNIT Models 6414, 6415 Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Oil No. Adv./Ret. Dia. Spindle Spindle Feed Filler @ 500 psi Speed Speed Style 6414 2750/1500 4 3.500 5000 80 Yes N/A 6415 2750/1500 4 3.500 5000 80 No N/A Features Concentric construction. Pressure compensating feed valves Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Thrust up to 4250# available. Other options available. All models can be used vertically or horizontally. Feed rate Adv. 1/4 to 75 per minute. Ret. 1/4 to 60 per minute. Rapid travel: 190 I.P.M. approx. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 6414 BR Y H S C1 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 6414-BR-Y-H-?-C1 This code specifies a Hydraulic Drilling unit (Model No. 6414) with a 4 stroke. Accessorizing this unit is a 1-7/8 High Torque Adjustable Adapter Spindle, High Torque 4.2:1 Reduction Drive, Timing Belt & Pulley with RPMs specified by customer, a 5 HP (1200 RPM) Nema C Flange Mounted Motor, mounted to the top on an Extended Belt Housing. 12 www.hausemachines.com

HYDRAULIC DRILLING UNIT Models 6614, 6615 Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Oil No. Adv./Ret. Dia. Spindle Spindle Feed Filler @ 500 psi Speed Speed Style 6614 2750/1500 6 3.500 5000 80 Yes N/A 6615 2750/1500 6 3.500 5000 80 No N/A Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 6615 AQ I B P A4 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 6615-AQ-I-B-P-A4 This code specifies a Hydraulic Drilling unit (Model No. 6615) with a 6 stroke. Accessorizing this unit is a #3 Morse Taper Spindle, Standard Hi-Lo Reduction Drive, 5-Step B Section Pulley, a 3 HP (1200 RPM) Nema C Flange Mounted Motor, mounted to the left side on an Overhead Belt Housing. Features Concentric construction. Pressure compensating feed valves. Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Thrust up to 4250# available Other options available. All models can be used vertically or horizontally. Feed rate Adv. 1/4 to 75 per minute. Ret. 1/4 to 60 per minute. Rapid travel: 190 I.P.M. approx. www.hausemachines.com 13

HYDRAULIC DRILLING UNIT Models 6629, 6639 Models 6649, 6659 are Flange Mount Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Depth No. Adv./Ret. Dia. Spindle Spindle Feed Repeat- @ 1000 psi Speed Speed ability 6629* 3000/3000 6 3.500 5000 80 Programmable +/-.0005 6639** 3000/3000 6 3.500 5000 80 Programmable +/-.0005 6649* 3000/3000 6 3.500 5000 80 Programmable +/-.0005 6659** 3000/3000 6 3.500 5000 80 Programmable +/-.0005 * Denotes Temposonic probe ** Denotes Sony encoder feedback Features Full programmability. Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Other options available. All models can be used vertically or horizontally. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 6629 BE N N/A Q C3 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 6629-BE-N-N/A-Q-C3 This code specifies a Hydraulic Drilling unit (Model No. 6629) with a 6 stroke. Accessorizing this unit is a 1-1/16 Adjustable Adapter Spindle, 1-1/8 Direct Drive, no Belt/Pulley system, a 3 HP (1800 RPM) Nema C Flange Mounted Motor. No Belt Housing required. 14 www.hausemachines.com

HYDRAULIC DRILLING UNIT Models 6194, 6195 Specifications (Unit: inch) Model Thrust Stroke Quill Max. Min. Retract Oil No. Adv./Ret. Dia. Spindle Spindle Feed Filler @ 500 psi Speed Speed Style 6194 2750/1500 10 3.500 5000 80 Yes N/A 6195 2750/1500 10 3.500 5000 80 No N/A Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 6194 BK A A Q A1 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 6194-BK-A-A-Q-A1 This code specifies a Hydraulic Drilling unit (Model No. 6194) with a 10 stroke. Accessorizing this unit is a 1-3/8 Adjustable Adapter Spindle, Inline Shaft Drive, 5-Step 3V Section Pulley, a 3 HP (1800 RPM) Nema C Flange Mounted Motor, mounted to the left side on an Overhead Belt Housing. Features Concentric construction. Pressure compensating feed valves. Belt housing/position choices. Various spindle and drive choices. Pulley and RPM choices. Thrust up to 4250# available. Other options available. All models can be used vertically or horizontally. Feed rate Adv. 1/4 to 75 per minute. Ret. 1/4 to 60 per minute. Rapid travel: 190 I.P.M. approx. www.hausemachines.com 15

HYDRAULIC DRILLING UNIT Model FD6-130 Features High RPM application is available, specify this requirement when placing order. Left side mounted fitting holes and flow control valve are available. Capable of ±.0005 with short dwell. Specifications (Unit: metric) Hydraulic Pressure 280 ~ 350 P.S.I. Drilling Capacity 5/8 (steel) Stroke 4.7 Max. Revolution/Minute 2,000RPM Flow Control Valve FCC-G02-4 Weight 70.5 lb Cylinder Diameter 3 Cylinder Area Forward 6.70 IN 2, Backward 4.75 IN 2 Thrust Force 1900 lb @ 280 P.S.I. Spindle Options (See page 51 for drawings and dimensions) ER20 Pg. 51 JT6 Pg. 51 AS22 Pg. 51 MT3 Pg. 51 ER25 Pg. 51 JT6 Multi Pg. 51 MT2 Pg. 51 Consumption Parts O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover Spindle Bearing Pulley Bearing P-58x2, G-75x1 P-70x2, G-45x1 P-30x2, G-40x1, G-75x1 a. 32005x1, 6005Zx1, 32004x1, 6004Zx1 b. 7005x2, 7004x2 a. 6008Zx1, 51208x1 or 51108x1 b. 7008x2 16 www.hausemachines.com

HYDRAULIC DRILLING UNIT Model FD62-100 Specifications (Unit: metric) Hydraulic Pressure 280 ~ 350 P.S.I. Drilling Capacity 5/8 (steel) Power 1HP-2P or 4P, 230V/460V Stroke 4 Max. Revolution/Minute 2,000RPM Flow Control Valve FCC-G02-4 Weight 145 lb Cylinder Diameter 3 Cylinder Area Forward 6.70 IN 2, Backward 4.75 IN 2 Thrust Force 1900 lb @ 280 P.S.I. Transmission a. A2-O.D.-4 b. H.T.D.-5M-62T c. Step pulley O.D.-5-4.3-3.5 Features High RPM application is available, specify this requirement when placing order. Left side mounted fitting holes and flow control valve are available. Capable of ±.0005 with short dwell. Consumption Parts O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover Spindle Bearing Pulley Bearing P-58x2, G-80x2 P-70x2, G-45x1 P-30x2, G-75x1 a. 32005x1, 6005Zx1, 32004x1, 6004Zx1 b. 7005x2, 7004x2 a. 6008Zx1, 51208x1 or 51108x1 b. 7008x2 Spindle Options (See page 51 for drawings and dimensions) ER20 Pg. 51 JT6 Pg. 51 AS22 Pg. 51 ER25 Pg. 51 JT6 Multi Pg. 51 www.hausemachines.com 17

HYDRAULIC DRILLING UNIT Model FD7-150 Features The unit can be mounted on machine with its base or front end. Left side mounted fitting holes and flow control valve are available, specify this requirement when placing order. Capable of ±.0005 repeatability with short dwell. If mounting multiple spindle head to this unit, please choose nose type: FD-7M-150MT3B. Specifications (Unit: metric) Hydraulic Pressure 280 ~ 350 P.S.I. Drilling Capacity 1 (steel) Stroke 5.5 Max. Revolution/Minute 1,500RPM Flow Control Valve FCC-G03-8 Weight 140 lb Cylinder Diameter 4.33 Cylinder Area Forward 11.0 IN 2, Backward 6.95 IN 2 Thrust Force 3124 lb @ 280 P.S.I. Spindle Options (See page 52 for drawings and dimensions) AS32 Pg. 52 ER40 Pg. 52 FB30 Pg. 52 MT3A Pg. 52 MT3B Pg. 52 MT3B Multi Pg. 52 Consumption Parts O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover Spindle Bearing Pulley Bearings P-80x2, G-105x1, DH-80x1 P-100x2, G-65x1 P-55x2, G-105x1 32008x1, 32007x1, 6007x1, 6007Zx1 6013Zx1, 51213x1 18 www.hausemachines.com

HYDRAULIC DRILLING UNIT Model FD75-100 Specifications (Unit: metric) Hydraulic Pressure 280 ~ 490 P.S.I. Drilling Capacity 1 1/4 (steel) Stroke 4 Max. Revolution/Minute 1,000RPM Flow Control Valve FCC-G03-8 Weight 187 lb Cylinder Diameter 4.33 Cylinder Area Forward 11.0 IN 2, Backward 6.95 IN 2 Thrust Force 3124 lb @ 280 P.S.I. Features High RPM application is available, specify this requirement when placing order. Left side mounted fitting holes and flow control valve are available, specify this requirement when placing order. Capable of ±.0005 with short dwell. If mounting multiple spindle head to this unit, please choose nose type: FD-75-100MT3A is recommended. Consumption Parts O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover Spindle Bearing P-80x2, G-105x3, DH-80x1 P-100x2, G-65x1 P-55x2, G-105x1 32008x1, 32007x1, 6007Zx1, 6008Zx1 Pulley Bearings 6013Zx1, 51213x1 Spindle Options (See page 52 for drawings and dimensions) ER40 Pg. 52 FB30 Pg. 52 FD75-100-MT3A Multi Pg. 52 www.hausemachines.com 19

HYDRAULIC DRILLING UNIT Model FD8-150 Features High RPM application is available, specify this requirement when placing order. Left side mounted fitting holes and flow control valve are available, specify this requirement when placing order. Capable of ±.0005 with short dwell. If mounting multiple spindle head to this unit, please choose nose type: FD-8M-150MT4B is recommended. Specifications (Unit: metric) Hydraulic Pressure 280 ~ 490 P.S.I. Drilling Capacity 1 3/8 (steel) Stroke 5.5 Max. Revolution/Minute 1,500RPM Flow Control Valve FCC-G03-8 Weight 148 lb Cylinder Diameter 4.33 Cylinder Area Forward 11.0 IN 2, Backward 4.87 IN 2 Thrust Force 3124 lb @ 280 P.S.I. Spindle Options (See page 52-53 for drawings and dimensions) ER40 Pg. 52 FB30 Pg. 52 NT40 Pg. 52 ER50 Pg. 52 MT4A Pg. 52 MT4B Pg. 52 MT4B Multi Pg. 53 Consumption Parts O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover Spindle Bearing Pulley Bearings P-90x2, G-115x1, DH-90x1 P-100x2, G-65x1 P-55x2, G-105x1 33010x1, 32008x1, 6010Zx1, 6008Zx1 6013Zx1, 51213x1 20 www.hausemachines.com

HYDRAULIC DRILLING UNIT Model FD85-100 Specifications (Unit: metric) Hydraulic Pressure 280 ~ 350 P.S.I. Drilling Capacity 1 5/8 (steel) Stroke 4 Max. Revolution/Minute 1,800RPM Flow Control Valve FCC-G03-8 Weight 187 lb Cylinder Diameter 4.33 Cylinder Area Forward 11.0 IN 2, Backward 4.87 IN 2 Thrust Force 3124 lb @ 280 P.S.I. Features High RPM application is available, specify this requirement when placing order. Left side mounted fitting holes and flow control valve are available, specify this requirement when placing order. Capable of ±.0005 with short dwell. If mounting multiple spindle head to this unit, please choose nose type: FD-85M-100MT4B is recommended. Consumption Parts O-Ring for Front Cover O-Ring for Piston O-Ring for Rear Cover Spindle Bearing Pulley Bearings P-90x2, G-105x3, DH-90x1 P-100x2, G-65x1 P-55x2, G-105x1 33010x1, 32008x1, 6010Zx1, 6008Zx1 6013Zx1, 51213x1 Spindle Options (See page 53 for drawings and dimensions) FB30 Pg. 53 MT4A Pg. 53 MT4B Multi Pg. 53 www.hausemachines.com 21

LEAD SCREW TAPPING UNIT Models 3496, 3497 Specifications (Unit: inch) Model Thrust Stroke Screw Max. Min. Pitches Rapid No. Adv./Ret. Total Length Spindle Spindle Avail. Travel Speed Speed (Air) 3496 N/A 4 2 of total 2000 80 Std/Metric Yes 3497* N/A 4 2 of total 1000 80 Std/Metric Yes *Note: For single spindle application add ZZ to Special column on order form. Features Rapid travel before lead screw engagement of work piece. Interchangeable lead screws and nuts. Depth repeatability of 1/8th revolution @ 1000 rpm s. Full adjustability for rapid and feed distances. Pulley and RPM choices. Belt housing/position choices. Various spindle and drive choices. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 3496 BO V H/280 DD A1 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 3496-BO-V-H/280-DD-A1 This code specifies a Lead Screw Tapping unit (Model No. 3496) with a 4 stroke. Accessorizing this unit is a 1-1/2 Adjustable Adapter Spindle, 4.2:1 Reduction Drive, Timing Belt & Pulley with 280 RPM, a 2.4 HP (1145 RPM) Demag Motor, mounted to the top on an Overhead Belt Housing. 22 www.hausemachines.com

LEAD SCREW TAPPING UNIT Models 3696, 3697, 3698 Specifications (Unit: inch) Model Thrust Stroke Screw Max. Min. Pitches Rapid No. Adv./Ret. Total Length Spindle Spindle Avail. Travel Speed Speed (Air) 3696 N/A 6 2 of total 2000 80 Std/Metric Yes 3697* N/A 6 2 of total 1000 80 Std/Metric Yes 3698* N/A 6 4 of total 1000 80 Std/Metric Yes *Note: For single spindle application add ZZ to Special column on order form. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 3697 BT Y H/180 EE C3 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 3697-BT-Y-H/180-EE-C3 This code specifies a Lead Screw Tapping unit (Model No. 3697) with a 6 stroke. Accessorizing this unit is a High Torque Lead Screw, 1-7/8 Adjustable Adapter Spindle, High Torque 4.2:1 Reduction Drive, Timing Belt & Pulley with 180 RPM, a 3.5 HP (1140 RPM) Demag Motor, mounted to the bottom on an Extended Belt Housing. Features Rapid travel before lead screw engagement of work piece. Interchangeable lead screws and nuts. Depth repeatability of 1/8th revolution @ 1000 rpm s. Full adjustability for rapid and feed distances. Pulley and RPM choices. Belt housing/position choices. Various spindle and drive choices. www.hausemachines.com 23

LEAD SCREW TAPPING UNIT Models 5496, 5497 Specifications (Unit: inch) Model Thrust Stroke Screw Max. Min. Pitches Rapid No. Adv./Ret. Length Spindle Spindle Avail. Travel Speed Speed (Hyd) 5496 N/A 4 2 of total 2000 80 Std/Metric Yes 5497* N/A 4 2 of total 1000 80 Std/Metric Yes *Note: For single spindle application add ZZ to Special column on order form. Features Rapid travel before lead screw engagement of work piece. Interchangeable lead screws and nuts. Depth repeatability of 1/8th revolution @ 1000 rpm s. Full adjustability for rapid and feed distances. Pulley and RPM choices. Belt housing/position choices. Various spindle and drive choices. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 5496 AC A C CC C4 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 5496-AC-A-C-CC-C4 This code specifies a Lead Screw Tapping unit (Model No. 5496) with a 4 stroke. Accessorizing this unit is a Lead Screw Piloted Slot Spindle, Inline Shaft Drive, 4-Step B Section Pulley, a 1.55 HP (1110 RPM) Demag Motor, mounted to the left side on an Extended Belt Housing. 24 www.hausemachines.com

LEAD SCREW TAPPING UNIT Models 5696, 5697, 5698 Specifications (Unit: inch) Model Thrust Stroke Screw Max. Min. Pitches Rapid No. Adv./Ret. Length Spindle Spindle Avail. Travel Speed Speed (Hyd) 5696 N/A 6 2 of total 2000 80 Std/Metric Yes 5697* N/A 6 2 of total 1000 80 Std/Metric Yes 5698* N/A 6 4 of total 1000 80 Std/Metric Yes *Note: For single spindle application add ZZ to Special column on order form. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 5697 AV R A AA Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 5697-AV-R-A-AA This code specifies a Lead Screw Tapping unit (Model No. 5697) with a 6 stroke. Accessorizing this unit is a High Torque Lead Screw #4 Morse Taper Spindle, 19mm Direct Drive, 5-Step 3V Section Pulley, and a.97 HP (1090 RPM) Demag Motor. Features Rapid travel before lead screw engagement of work piece. Interchangeable lead screws and nuts. Depth repeatability of 1/8th revolution @ 1000 rpm s. Full adjustability for rapid and feed distances. Pulley and RPM choices. Belt housing/position choices. Various spindle and drive choices. www.hausemachines.com 25

LEAD SCREW TAPPING UNIT Models 7204, 7205 Specifications (Unit: inch) Model Thrust Stroke Screw Max. Min. Pitches Rapid No. Length Spindle Spindle Avail. Travel Speed Speed 7204 N/A 2 2 2000 80 Std/Metric No 7205* N/A 2 2 1000 80 Std/Metric No *Note: For single spindle application add ZZ to Special column on order form. Other lead screw models are available in 4 stroke configurations. Contact Hause Machines or your local representative for details. Features No hole safety switch. Interchangeable lead screws and nuts. Depth repeatability of 1/8th revolution @ 1000 rpm s. Pulley and RPM choices. Belt housing/position choices. Various spindle and drive choices. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 7204 BH A B BB C4 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 7204-BH-A-B-BB-C4 This code specifies a Lead Screw Tapping unit (Model No. 7204) with a 2 stroke. Accessorizing this unit is a Quick Change 1-1/16 Adjustable Adapter Spindle, Inline Shaft Drive, 5-Step B Section Pulley, a 1.35 HP (1660 RPM) Demag Motor, mounted to the left side on an Extended Belt Housing. 26 www.hausemachines.com

LEAD SCREW TAPPING UNIT Models 7494, 7495 Specifications (Unit: inch) Model Thrust Stroke Screw Max. Min. Pitches Rapid No. Length Spindle Spindle Avail. Travel Speed Speed 7494 N/A 4 4 2000 80 Std/Metric No 7495* N/A 4 4 1000 80 Std/Metric No *Note: For single spindle application add ZZ to Special column on order form. Other lead screw models are available in 4 stroke configurations. Contact Hause Machines or your local representative for details. Features No hole safety switch. Interchangeable lead screws and nuts. Depth repeatability of 1/8th revolution @ 1000 rpm s. Pulley and RPM choices. Belt housing/position choices. Various spindle and drive choices. Customizing A Hause Unit To Your Specs Most Hause power feed units can be customized to best fit the needs of your unique applications. Using the worksheet at the back of this catalog and the information found on pages 36 49, you can spec out the Hause unit of your choice. Model Spindle Drive Belt/Pulley Motor Belt Housing Special 7494 BE A A BB B1 Pgs. 36-37 Pgs. 38-39 Pgs. 40-41 Pgs. 42-44 Pg. 45 Pgs. 46-49 Example: 7494-BE-A-A-BB-B1 This code specifies a Lead Screw Tapping unit (Model No. 7494) with 4 of lead screw stroke. Accessorizing this unit is a 1-1/16 Adjustable Adapter Spindle, Inline Shaft Drive, 5-Step Pulleys, and a 1.35 HP Demag Motor, mounted behind the unit on a Small Extended Belt Housing. www.hausemachines.com 27

TAPPING UNIT Model F2N-60 Features The unit is equipped with high precision, lead screw and nut. Thread pitch should be given when ordering. Lead screw is mounted internally to the unit body. Torque protection device is included for reducing tap damage. Motor and pulley set can be mounted around the circle with interval of 45 degrees. Specifications (Unit: metric) Tapping Capacity 1/4 (steel) Chuck Capacity ER16-3/8, JT1-1/4 Power 0.5HP-2P, 4P 220V/440V-60HZ Stroke 2 Max.RPM 1,800RPM Weight 44 lb Thread Pitch 100UNF ~ 24UNF Screw Lubrication Grease Transmission V-belt, H.T.D.-5M Consumption Parts Spindle Bearing NKX 17ZB x 2 Pulley Bearings 6003ZZx1, 6203ZZx1 Spindle Options (See page 53 for drawings and dimensions) ER16 Pg. 53 JT1 Pg. 53 28 www.hausemachines.com

TAPPING UNIT Model F6N-60 Specifications (Unit: metric) Tapping Capacity 1/2 (steel) Stroke 2.5 Thread Pitch 64UNF ~ 16UNF Screw Lubrication Grease Weight 40 lb Consumption Parts Spindle Bearing Pulley Bearings 6004Zx2 60062RSx2, 6906ZZx1 Features The unit is equipped with high precision, lead screw and nut. Thread pitch should be given when ordering. Lead screw is mounted externally to the end of unit for easy and quick change. Horizontal and vertical application are available, oil cup should be adjusted accordingly. For mounting multiple spindle to this tapping unit, nose type: F6N-60-JT6 is recommended. Spindle Options (See page 53 for drawings and dimensions) JT6 Pg. 53 ER20 Pg. 53 AS22 Pg. 53 www.hausemachines.com 29

TAPPING UNIT Model F7N-80 Features The unit is equipped with high precision, lead screw and nut. Thread pitch should be given when ordering. Lead screw is mounted externally to the end of unit for easy and quick change. Horizontal and vertical application are available, oil cup should be adjusted accordingly. For mounting multiple spindle to this tapping unit, we recommend nose type: F7N-80-MT3B. Specifications (Unit: metric) Tapping Capacity 1 1/4 (steel) Stroke 3 Thread Pitch 36UNF ~ 10UNC Screw Lubrication Grease Weight 90 lb Transmission a. A2-O.D-6 b. B2-O.D-6 c. H.T.D.-8M-58T d. RS40x2-35T Consumption Parts Spindle Bearing 6008Zx3 Pulley Bearings 6010Zx2, 6010LLx1 O-Ring for Spindle TC-45, 68, 12 Spindle Options (See page 53-54 for drawings and dimensions) AS32 Pg. 53 MT3B Multi Pg. 53 NT40 Pg. 53 FB20 Pg. 54 30 www.hausemachines.com

TAPPING UNIT Model F8N-90 Specifications (Unit: metric) Tapping Capacity 2 (steel) Stroke 3.5 Thread Pitch 24UNC ~ 8UNC Screw Lubrication Grease Weight 145 lb Transmission a. RS40x2-30T b. H.T.D-8M-48T Consumption Parts Spindle Bearing 6210Zx3 Pulley Bearings 6212Zx1, 6212ZZx1 O-Ring for Spindle TC-60, 90, 11 Features The unit is mounted with high precision, grinding master gauge, suitable for accurate tapping works. Thread pitch should be given when ordering. Lead screw is mounted externally to the end of unit for easy and quick change. This unit can be mounted horizontally or vertically, oil cup should be adjusted accordingly. To increase life of lead screw, installation of tension spring for vertical application is recommended. Spindle Options (See page 54 for drawings and dimensions) MT4B Multi Pg. 54 AS36 Pg. 54 FB30 Pg. 54 www.hausemachines.com 31

TAPPING UNIT Model F85N-90 Features The unit is equipped with high precision, lead screw and nut. Thread pitch should be given when ordering. Lead screw is mounted externally to the end of unit for easy and quick change. This unit can be mounted horizontally or vertically, oil cup should be adjusted accordingly. To increase life of lead screw, installation of tension spring for vertical application is recommended. Specifications (Unit: metric) Tapping Capacity 2 (steel) Stroke 3.5 Thread Pitch 24UNC ~ 8UNC Screw Lubrication Grease Weight 196 lb Transmission a. RS40x2-30T b. H.T.D-8M-48T c. RS50x3-26T Consumption Parts Spindle Bearing 6010Zx4 Pulley Bearings 6212Zx1, 6212ZZx1 O-Ring for Spindle TC-60, 90, 11 Spindle Options (See page 54 for drawings and dimensions) FB30 Pg. 54 32 www.hausemachines.com

DRILL-TAPPING UNIT Model FTD63-120/80 Specifications (Unit: metric) Drilling Section Tapping Section Hydraulic Pressure 350 ~ 490 P.S.I. Drilling Capacity 5/8 (steel) 1/2 (steel) Stroke 4.7 3 Max. Revolution/Minute 3,000RPM Flow Control Valve FCC-GO2-4 Weight 145 lb Cylinder Diameter 2 Cylinder Area 2.28 IN2 Thrust Force 810 lb @ 350 P.S.I. Transmission a. A2-O.D-4 b. H.T.D-5M-62T a. A2-O.D-4.8 b. H.T.D-5M-76T Thread Pitch 64UNF~16UNC Features Drill and tap spindle at the same station. Drill up to 5/8 in mild steel (4.7 total stroke) Tap up to 1/2 in mild steel (3 total stroke) Lead screw pitch changes from the rear. (Standard or Metric) Consumption Parts Drilling Section Tapping Section O-Ring for Front Cover UHS-58 UHS-58 O-Ring for Piston P-40x2, P25x2 O-Ring for Rear Cover P30-2, G75-1 Spindle Bearing 32005x1, 6005Zx1 32004x1, 6004Zx1 6005Zx2, 6004Zx2 Pulley Bearings 6008Zx1, 51208x1 60062RSx2,6906ZZx1 Spindle Options (See page 51 for drawings and dimensions) ER20 Pg. 51 JT6* Pg. 51 AS22 Pg. 51 MT3 Pg. 51 ER25 Pg. 51 JT6 Multi Pg. 51 MT2 Pg. 51 *Tapping spindle JT6 only www.hausemachines.com 33

DRILL-TAPPING UNIT Model FTD9-150/90 Features Drill and tap spindle at the same station. Drill up to 1-3/8 in mild steel (6 total stroke) Tap up to 2 in mild steel (3.5 total stroke) Lead screw pitch changes from the rear. (Standard or Metric) Specifications (Unit: metric) Drilling Section Tapping Section Hydraulic Pressure 280 ~ 350 P.S.I. Drilling Capacity 1 3/8 (steel) 2 (steel) Stroke 6 3.5 Max. Revolution/Minute 2,000RPM Flow Control Valve FCC-GO3-8 Weight 510 lb Cylinder Diameter 2.5 Cylinder Area 4.84 IN2 Thrust Force 2060 lb @ 420 P.S.I. Transmission a. B2-0O.D-6 b. H.T.D-8M-56T a. RS40-30T b. H.T.D-8M-48T Thread Pitch 24UNC~8UNC Spindle Options (See page 54 for drawings and dimensions) Drilling Spindle Flange Only FB45 Pg. 54 Tapping Spindle Flange Only FB45 Pg. 54 Consumption Parts Drilling Section Tapping Section O-Ring for Front Cover P-90x2, G-115x3, DH-100x1 O-Ring for Piston P-100x2, G-65x1 O-Ring for Rear Cover P-55x2, G-105x1 Spindle Bearing 33010x1, 32008x1 6010Zx1, 6008Zx1 6010Zx4 Pulley Bearings 6013Zx1, 51213x1 6212Z-1 34 www.hausemachines.com

NOTES 35

CUSTOM ADD-ONS FOR ENGLISH UNITS Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code Catalog No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125 2.150/2.160 AC Piloted Slot Lead Screw AD Piloted Slot High Torque AE Piloted Slot High Torque Lead Screw 2.75 2.250/2.230 AF #25 ER Collet Socket 2.656 1.625 AG #32 ER Collet Socket AH #33 Jacobs Taper 1.594 1.594 AI #33 Jacobs Taper Extended 3.094 3.094 AJ #33 Jacobs Taper Extra Long 5.281 5.281 AK #2 Morse Taper 3.562 1.235/1.230 AL #2 Morse Taper Extended 5.344 1.235/1.230 AM #2 Morse Taper Quill Support AN #2 Morse Taper High Speed AO #2 Morse Taper Series A 5.688 1.9684/1.9689 AP #2 Morse Taper Series A Extended 7.688 1.9684/1.9689 AQ #3 Morse Taper 6.562 1.2347/1.2350 AR #3 Morse Taper High Torque 6.188 2.1653/2.1659 AS #3 Morse Taper High Torque Extended 7.812 2.1653/2.1659 AT #4 Morse Taper 5.688 1.9684/1.9689 AU #4 Morse Taper Extended 7.688 1.9684/1.9689 AV #4 Morse Taper High Torque 7.812 2.1653/2.1659 AW #4 Morse Taper Lead Screw 5.688 1.870/1.875 36 Note: HT spindles are only available for hydraulic, all HT lead screw units and 87XX series ballscrew units.

CUSTOM ADD-ONS FOR ENGLISH UNITS Spindles (Continued) Adjustable Adapter Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX X X XX XX XX Catalog No. Description A B AY 3/4 Adjustable Adapter, 3/4 A.A.L.S. & 7/8 A.A.L.S. 3.469 1.230/1.235 AZ 3/4 Adjustable Adapter Extra Long BA 1 Adjustable Adapter 4.094 1.595/1.600 BB 1 Adjustable Adapter Short 3.094 1.595/1.600 BC 1 Adjustable Adapter Extra Long With 4 5.688 1.9684/1.9689 BD 1 Adjustable Adapter Extra Long With 6 7.688 1.9684/1.9689 BE 1-1/16 Adjustable Adapter 4.094 1.595/1.600 BF 1-1/16 Adjustable Adapter Extra Long 5.688 1.9684/1.9689 BG 1-1/16 Adjustable Adapter Quick Change 4.938 1.6090/1.6095 BH 1-1/16 Adjustable Adapter Quick Change 8.156 1.6090/1.6095 BI 1-1/4 Adjustable Adapter 5.688 1.9684/1.9689 BJ 1-3/8 Adjustable Adapter Quick Change 4.938 1.9840/1.9845 BK 1-3/8 Adjustable Adapter 5.688 1.9840/1.9845 BL 1-3/8 Adjustable Adapter Extra Long 7.688 1.9840/1.9845 BM 1-3/8 Adjustable Adapter High Torque 7.313 2.1653/2.1659 BN 1-3/8 Adjustable Adapter High Torque Extra Long 8.938 2.1653/2.1659 BO 1-1/2 Adjustable Adapter 5.688 1.9684/1.9689 BP 1-1/2 Adjustable Adapter Extra Long 7.688 1.9840/1.9845 BQ 1-1/2 Adjustable Adapter High Torque 6.188 2.1653/2.1659 BR 1-7/8 Adjustable Adapter High Torque 6.188 2.6245/2.6255 BS 1-7/8 Adjustable Adapter Extra Long 7.188 1.9840/1.9845 BT 1-7/8 Adjustable Adapter High Torque Lead Screw 6.563 2.625 SP Special Note: HT spindles are only available for hydraulic, all HT lead screw units and 87XX series ballscrew units. 37

CUSTOM ADD-ONS FOR ENGLISH UNITS Drives Inline Drive Planetary Reduction Hi-Lo See note on next page for location in the Specification Code Catalog No. Description A B C D E A Inline Shaft Drive 5.000.8740/.8745 3.000 3.250 0.125 B High Torque 5.000 1.3740/1.3745 3.438 3.688 0.250 C Coolant Through 5.000 1.3740/1.3745 3.438 3.688 0.250 D Draw Bar 5.000 1.3740/1.3745 3.438 3.688 0.250 E Draw Bar With Grease Port 5.000 1.3740/1.3745 3.438 3.688 0.250 F Planetary Reduction 6:1 6.250 3.688 G Planetary Reduction High Torque 6.250 3.688 H Coolant Through 6.250 3.688 I Hi-Lo Reduction Standard 8.000 5.500 J Hi-Lo Reduction High Torque 8.000 5.500 Note: If an HT spindle has been selected, choose an HT drive. HT drive is also required for coolant through or draw bar applications. (Spindle choices: AE, AR, AS, AV, BM, BN, BQ, BT). 38

CUSTOM ADD-ONS FOR ENGLISH UNITS Drives (Continued) Direct Drive Gear Reduction Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X XX XX XX Catalog No. Description A B C D E K 5/8 Direct Drive 6-1/2 5/8 17/32 L 3/4 Direct Drive 6-1/2 3/4 17/32 M 7/8 Direct Drive 6-1/2 7/8 17/32 N 1-1/8 Direct Drive 9-1/2 1-1/8 19/32 O 1-3/8 Direct Drive 9-1/2 1-3/8 19/32 P 1-3/8 Direct Drive High Torque 9-1/2 1-3/8 19/32 Q 14mm Direct Drive 6-1/2 14mm 17/32 R 19mm Direct Drive 6-1/2 19mm 17/32 S 24mm Direct Drive 9-1/2 24mm 19/32 T 28mm Direct Drive 9-1/2 28mm 19/32 U 2.9:1 Reduction Drive.8740/.8745 2.380 2.438 4.938 V 4.2:1 Reduction Drive.8740/.8745 2.380 2.438 4.938 W 5.7:1 Reduction Drive.8740/.8745 2.380 2.438 4.938 X 2.9:1 Reduction Drive High Torque.8740/.8745 2.380 2.438 4.938 Y 4.2:1 Reduction Drive High Torque.8740/.8745 2.380 2.438 4.938 Z 5.7:1 Reduction Drive High Torque.8740/.8745 2.380 2.438 4.938 Note: If an HT spindle has been selected, choose an HT drive. HT drive is also required for coolant through or draw bar applications. (Spindle choices: AE, AR, AS, AV, BM, BN, BQ, BT). 39

CUSTOM ADD-ONS FOR ENGLISH UNITS Belts/Pulleys Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X XX XX XX A 5 Step 3V Section Pulley B 5 Step B Section Pulley C 4 Step B Section Pulley D 4 Step B Section Pulley 5 Step B Section Pulley 40 E 4 Step Pulley & Belt Assembly to Hi-Lo 1:1 & 6:1 Ratio Drive Assembly F 5 Step Pulley & Belt Assembly to Hi-Lo 1:1 & 6:1 Ratio Drive Assembly

CUSTOM ADD-ONS FOR ENGLISH UNITS Belts/Pulleys (Continued) See note on previous page for location in the Specification Code A B C D Motor 5 Step 3V 5 Step B 4 Step B 4 Step Pulley on Motor RPM Section Section Section 5 Step Pulley on Driven Shaft Pulleys Pulleys Pulleys Low Range High Range RPM HP RPM HP HP RPM HP HP RPM HP HP RPM HP HP Max. Std. Max. Std. Max. Std. Max. Std. Max. Duty Duty Duty Duty Duty Duty Duty Duty Duty 870 410 0.8 450 0.2 1.7 435 0.8 1.4 335 0.8 1.4 375 0.8 1.4 660 1.5 620 1.8 2.4 700 1.2 1.8 500 1.2 1.8 580 1.2 1.8 870 1.6 870 2.2 3.0 1090 1.8 2.5 725 1.7 2.4 870 1.6 2.3 1130 1.8 1220 2.2 3.0 1740 1.5 2.0 1050 2.0 2.7 1300 1.9 2.7 1820 1.7 1700 2.0 3.0 1160 550 1.1 600 1.4 2.1 580 0.9 1.6 450 0.9 1.6 500 0.9 1.6 880 2.0 830 2.2 2.9 930 1.4 2.2 660 1.4 2.2 770 1.4 2.2 1160 2.1 1160 2.8 3.8 1450 2.1 3.0 960 2.1 3.0 1160 2.0 2.8 1500 2.3 1620 2.7 3.7 2320 1.3 2.5 1390 2.5 3.3 1730 2.3 3.3 2400 2.1 2250 2.1 3.4 1750 830 1.5 900 1.8 2.8 875 1.0 2.0 680 1.0 2.0 750 1.0 2.0 3500 1650 2.6 1330 2.8 1250 2.9 3.9 1400 1.8 2.9 1000 1.8 2.9 1160 1.8 2.9 1750 3.0 1750 3.6 5.0 2200 2.8 4.0 1450 2.7 3.9 1750 2.5 3.6 2270 3.3 2450 3.4 4.7 3500 1.7 3.0 2100 3.1 4.3 2600 2.9 4.3 3650 2.7 3400 2.1 3.8 2670 4.7 3500 5.0 4550 5.4 7300 3.8 G B Section Belt & Pulley (Specify RPM) H Timing Belt & Pulley (Specify RPM) E Motor 4 Step Pulley on Motor Only 5 Step Pulley on Motor Only RPM (For Use With I or J (For Use With I or J Hi-Lo Drive) Hi-Lo Drive) F Low Range High Range High Range HP In Low In High HP In Low In High HP In Low In High Transmitted Position Position Transmitted Position Position Transmitted Position Position RPM RPM RPM RPM RPM RPM 870 1.3 56 340 1.4 63 375 1.7 72 450 1.7 83 550 1.7 98 585 2.4 104 620 2.4 145 870 2.4 145 870 3.0 145 870 2.9 218 1320 2.9 218 1320 3.0 204 1220 3.0 280 1700 1160 1.5 75 450 1.6 83 500 2.1 97 580 2.2 110 660 2.1 130 780 2.9 138 830 3.0 160 960 2.9 190 1140 3.8 193 1160 3.8 230 1380 3.6 290 1740 3.7 271 1620 3.4 385 2320 1750 1.8 113 680 2.0 125 750 2.8 145 875 2.9 166 1100 2.7 195 1170 3.9 208 1250 4.0 243 1460 3.9 290 1740 5.0 240 1750 5.0 350 2100 4.8 440 2640 4.7 408 2450 3.8 3500 41

CUSTOM ADD-ONS FOR ENGLISH UNITS Motors Note: Motors are ball bearing, enclosed NEMA C Flange Mounted, 230/460 volt, 3 phase, 60 Hertz. Maximum motor size is limited to HP transmitted on Belts/Pulley chart if using step pulleys or by.009 HP/Rev for standard drives and spindles,.055 HP/Rev on HT drives and spindles or by the 8-1/2 flange ø if using our belt housing. Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X X XX XX 42 Catalog No. H.P. R.P.M. Frame Shaft Dia. Key Size Flange Dia. O.V.L. Motor Dia. Clearance A 1/2 1200 56C 5/8 3/16 4-1/2 13.25 6-5/8 5 B 1/2 1800 56C 5/8 3/16 4-1/2 12.00 6-5/8 5 C 1/2 3600 56C 5/8 3/16 4-1/2 11.38 6-5/8 5 D 3/4 1200 143TC 7/8 3/16 4-1/2 13.25 6-5/8 5-1/4 E 3/4 1800 56C 7/8 3/16 4-1/2 11.38 6-5/8 5 F 3/4 3600 56C 7/8 3/16 4-1/2 11.38 6-5/8 5 G 1 1200 145C 7/8 3/16 4-1/2 13.38 6-5/8 5-1/4 H 1 1800 143C 7/8 3/16 4-1/2 12.31 6-5/8 5-1/4 I 1 3600 56C 7/8 3/16 4-1/2 11.38 6-5/8 5 J 1-1/2 1200 145C 7/8 3/16 4-1/2 13.31 6-5/8 5-7/8 K 1-1/2 1800 145C 7/8 3/16 4-1/2 12.31 6-5/8 5-7/8 L 1-1/2 3600 143C 7/8 3/16 4-1/2 12.06 6-5/8 5-7/8 M 2 1200 145C 7/8 3/16 4-1/2 15.68 7-7/8 5-7/8 N 2 1800 145C 7/8 3/16 4-1/2 16.55 6-5/8 5-7/8 O 2 3600 145C 7/8 3/16 4-1/2 16.45 6-5/8 5-7/8 P 3 1200 213TC 1-3/8 5/16 8-1/2 18.68 9-9/16 7-7/8 Q 3 1800 182TC 1-1/8 1/4 8-1/2 15.19 7-7/8 5-7/8 R 3 3600 145TC 7/8 3/16 4-1/2 14.19 6-5/8 5-1/4 S 5 1200 215C 1-3/8 5/16 8-1/2 19.81 9-9/16 7-3/8 T 5 1800 184TC 1-1/8 1/4 8-1/2 16.55 7-7/8 5-7/8 U 5 3600 182TC 7/8 3/16 8-1/2 16.55 7-7/8 5-7/8 V 7-1/2 1800 213TC 1-3/8 5/16 8-1/2 18.68 9-9/16 7-3/8 W 7-1/2 3600 184TC 7/8 3/16 8-1/2 16.56 7-7/8 5-7/8 X 10 1800 215TC 1-3/8 5/16 8-1/2 19.21 10-1/4 7-3/8 X1 10 3600 215TC 1-3/8 5/16 8-1/2 18.68 7-7/8 5-7/8 Y 15 1800 254C 1-5/8 3/8 8-1/2 23.60 12-15/16 9-5/8 Y1 15 3600 254TC 1-5/8 3/8 8-1/2 23.16 12-15/16 9-5/8 Z 20 1800 256TC 1-5/8 3/8 8-1/2 23.66 12-15/16 9-5/8 Z1 20 3600 256TC 1-5/8 3/8 8-1/2 23.16 12-15/16 9-5/8

CUSTOM ADD-ONS FOR ENGLISH UNITS Motors (Continued) See note on previous page for location in the Specification Code Catalog No. H.P. R.P.M. Frame Shaft Dia. Key Size Flange A Dia. Flange B Dia. O.V.L. Motor Dia. Clearance AA.97 1090 KBA80B 19mm/0.784 6MM/.236 130mm/5.118 200mm/7.874 338mm/13.307 158mm/6.220 8-5/8 BB 1.35 1660 KBA80A 19mm/0.784 6MM/.236 130mm/5.118 200mm/7.874 353mm/13.897 158mm/6.220 8-5/8 CC 1.55 1110 KBA90B 24mm/0.944 8MM/.315 130mm/5.118 200mm/7.874 394mm/15.512 178mm/7.007 9-1/2 DD 2.4 1145 KBA100B 28mm/1.102 8MM/.315 130mm/5.118 200mm/7.874 441mm/17.365 196mm/7.716 5-1/4 EE 3.5 1140 KBA112B 28mm/1.102 8MM/.315 130mm/5.118 200mm/7.874 464mm/18.267 220mm/8.661 11-3/4 FF 3.7 1725 KBA100B 28mm/1.102 8MM/.315 130mm/5.118 200mm/7.874 441mm/17.365 196mm/7.716 10-3/4 Catalog A B C Flange Shaft No. Motors Description Length Width Length Dia. Dia. Key Size Bolt Circle HoleØ GG Yaskawa SGMSH-10A Servo Motor (149) 5.87 (100) 3.94 (45) 1.77 (95) 3.740 (24).945 8mm x 7mm (115) 4.53 (7).276 HH Yaskawa SGMSH-15A Servo Motor (175) 6.89 (100) 3.94 (45) 1.77 (95) 3.740 (24).945 8mm x 7mm (115) 4.53 (7).276 II Yaskawa SGMGH-13A Servo Motor (185) 7.28 (130) 5.12 (58) 2.28 (110) 4.332 (22).866 6mm x 6mm (145) 5.709 (9).354 JJ Yaskawa SGMSH-30A Servo Motor (199) 7.83 (130) 5.12 (63) 2.48 (110) 4.332 (28) 1.102 8mm x 7mm (145) 5.709 (9).354 KK Yaskawa SGMGH-30A Servo Motor (192) 7.56 (180) 7.09 (79) 3.11 (114.3) 4.5 (35) 1.378 10mm x 8mm (200) 7.87 (13.5).530 LL Parker Max-Plus #230 Series 6 Frame Servo Motor (368) 14.48 (142) 5.59 (50) 1.97 (130) 5.120 (19).748 6mm x 6mm (165) 6.496 (10).394 MM Parker Max-Plus Series F-4050-Q-H0AA Servo Motor X X X (110) 4.332 X (145) 5.709 (10).394 NN Indramat Model #MKD071 Servo Motor (275) 10.82 (133) 5.23 (40) 1.575 (95) 3.740 (19).748 6mm x 6mm (130) 5.118 (9).354 OO CSM, Inc. MPM1141FRMM-CM Servo Motor (215) 8.46 (114) 4.49 (58) 2.28 (110) 4.332 (19).748 6mm x 6mm (130) 5.118 (9).354 PP CSM, Inc. MPM1421FRMM-CM Servo Motor (285) 11.22 (142) 5.59 (48.5) 1.97 (130) 5.12 (24).945 8mm x 7mm (165) 6.496 (11).433 QQ Intex MPM892T2E-1172 Servo Motor (222) 8.75 (82) 3.23 (30) 1.18 (73) 2.874 (24).945 6mm x 6mm (98) 3.86 (6).326 43

CUSTOM ADD-ONS FOR ENGLISH UNITS Motors (Continued) U R S 5/8 33/64 3/16 7/8 49/64 3/16 1-1/8 63/64 1/4 1-3/8 1-13/64 5/16 1-5/8 1-13/32 3/8 Nema C Frame Motors Quick Reference Chart Nema Frame D E 2F H N O P U V AA AB AH AJ AK BA BB BD XO TAP 56C 3-1/2 2-7/16 3 11/32 2-7/16 6-7/8 6-5/8 5/8 1-7/8 1/2 5 2-1/16 5-7/8 4-1/2 2-3/4 1/8 6-1/2 2-1/4 3/8-16 143TC 4 145TC 3-1/2 2-3/4 5 11/32 2-1/2 6-7/8 6-5/8 7/8 2-1/4 3/4 5-1/4 2-1/8 5-7/8 4-1/2 2-1/4 1/8 6-1/2 2-1/4 3/8-16 182C 4-1/2 2-11/16 7/8 2-1/4 2-1/8 5-7/8 4-1/2 1/8 6-1/2 3/8-16 184C 5-1/2 2-11/16 7/8 2-1/4 2-1/8 5-7/8 4-1/2 1/8 6-1/2 3/8-16 4-1/2 3-3/4 13/32 8-11/16 7-7/8 3/4 5-7/8 2-3/4 2-3/8 182TC 4-1/2 3-9/16 1-1/8 2-3/4 2-5/8 7-1/4 8-1/2 1/4 9 1/2-13 184TC 5-1/2 3-9/16 1-1/8 2-3/4 2-5/8 7-1/4 8-1/2 1/4 9 1/2-13 213C 5-1/2 3-1/2 1-1/8 3 2-3/4 215C 7 3-1/2 1-1/8 3 2-3/4 5-1/4 4-1/4 13/32 10-1/4 9-9/16 3/4 7-3/8 213TC 5-1/2 3-7/8 1-3/8 3-3/8 3-1/8 7-1/4 8-1/2 3-1/2 1/4 9 2-3/4 1/2-13 215TC 7 3-7/8 1-3/8 3-3/8 3-1/8 254C 8-1/4 4-1/16 1-3/8 3-3/4 3-1/2 256C 10 4-1/16 1-3/8 3-3/4 3-1/2 6-1/4 5 17/32 12-7/8 12-15/16 1 9-5/8 254TC 8-1/4 4-5/16 1-5/8 4 3-3/4 7-1/4 8-1/2 4-1/4 1/4 10 1/2-13 256TC 10 4-5/16 1-5/8 4 3-3/4 44

CUSTOM ADD-ONS FOR ENGLISH UNITS Belt Housings A Overhead (For 4-1/2" and 8-1/2" AK Motors) B Small Extended (For 4-1/2" AK Motors Only) C Extended (For 4-1/2" and 8-1/2" AK Motors) Note: These belt housings can be connected directly to all of the units or to the gear reductions. Alterations can be made for coolant and draw bar applications. 1 (Top) 4 (Left) 2 (Right) Looking at the unit from the spindle end, please indicate the orientation of the belt housing. 3 (Bottom) Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X X XX XX 45

CUSTOM ADD-ONS FOR ENGLISH UNITS Specials Feed Control Valves See note below for location in the Specification Code V1 Dual Feed Manifold V2 Skip Feed Cam Bar (Not Shown) Please specify rapid distance, skip distance and depth. Contact Hause Machines for more information. Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X X XX XX 46

CUSTOM ADD-ONS FOR ENGLISH UNITS Specials (Continued) See note on page 46 for location in the Specification Code Spindle Support Assembly Catalog No. Stroke A SA1 4 7-3/8 SA2 6 8-13/16 Right Angle Milling Attachment Catalog No. Stroke A B SA3 4 15-1/2 23-9/16 SA4 6 17-1/2 25-9/16 Heavy Duty Boring Adaption With Roller Bearings Catalog No. Stroke A SA5 4 15-1/2 SA6 6 17-1/2 47

CUSTOM ADD-ONS FOR ENGLISH UNITS Specials (Continued) See note on page 49 for location in the Specification Code Heavy Duty Milling Adaption With Tapered Bearings Catalog No. Stroke A SA7 4 15-1/2 SA8 6 17-1/2 4 Stroke High Speed Boring Spindle Catalog No. Stroke A SA9 4 19-3/4 Heavy Duty Milling Adaption With Tapered Bearings and Thru Coolant Catalog No. Stroke A SA10 4 18-3/16 48

CUSTOM ADD-ONS FOR ENGLISH UNITS Specials (Continued) Heavy Duty Right Angle Milling Head Catalog No. Stroke A SA11 6 28-3/8 Support Quill and THK Slide Assembly Catalog No. Stroke A SA12 4 11-1/32 SA13 6 14-3/16 Note: Location in the Specification Code Model Spindle Drive Belt/Pulley Motor Belt Housing Special X X XX XX X X XX XX 49

SPINDLE OPTIONS FOR METRIC UNITS FD3-55 FD3-80 FD3-55-ER16 FD3-55-JT1 FD3-55-JT2 FD55-80 FD3-80-ER16 FD3-80-JT1 FD3-80-JT2 FD55-80-JT6 FD55-80-ER20 FD56-100 FD56-100-ER20 FD56-100-JT6 FD56-100-AS22 50 FD56-100-ER25 FD56-100-JT6 Multi

SPINDLE OPTIONS FOR METRIC UNITS FD6-130/FTD63 (DRILLING) FD6-130-ER20 FTD63-ER20 FD6-130-JT6 FTD63-JT6 FD6-130-AS22 FTD63-AS22 FD6-130-MT3 FTD63-MT3 FD6-130-ER25 FTD63-ER25 FD6-130-JT6 Multi FTD63-JT6 Multi FD62-100 FD6-130-MT2 FTD63-MT2 FD62-100-ER20 FD62-100-JT6 FD62-100-AS22 FD62-100-ER25 FD62-100-JT6 Multi 51

SPINDLE OPTIONS FOR METRIC UNITS FD7-150 FD7-150-AS32 FD7-150-ER40 FD7-150-FB30 FD75-100 FD7-150-MT3A FD7-150-MT3B FD7-150-MT3B Multi FD8-150 FD75-100-ER40 FD75-100-FB30 FD75-100-MT3A Multi FD8-150-ER40 FD8-150-FB30 FD8-150-NT40 52 FD8-150-ER50 FD8-150-MT4A FD8-150-MT4B

SPINDLE OPTIONS FOR METRIC UNITS FD8-150-MT4B Multi FD85-100 F2N-60 FD85-100-FB30 FD85-100-MT4A FD85-100-MT4B Multi F6N-60 F2N-60-ER16 F2N-60-JT1 F6N-60-JT6 F6N-60-ER20 F6N-60-AS22 F7N-80 F7N-80-AS32 F7N-80-MT3B Multi F7N-80-NT40 53

SPINDLE OPTIONS FOR METRIC UNITS F8N-90 F7N-80-FB20 F85N-90 F8N-90-MT4B Multi F8N-90-AS36 F8N-90-FB30 FTD9 F85N-90-FB30 FTD9-FB45 54

WORKSHEET/ORDER FORM Job Requirements Please use the worksheets on pages 56 57 when requesting a quote or placing an order for any of the power feed units listed. To also assist us in providing you with the best product(s) for your needs, please complete the following information as accurately as possible. Applications Material List operations to be done by units Unit orientation (vert. or hor.) Tooling used Note any special conditions Date quote required by: Component/Machine delivery required by: Expected order date Approx. investment $ Number of units Customer Information Customer Name Title Company Address City State Zip Phone Fax Email www.hausemachines.com 55

WORKSHEET FOR METRIC UNITS For Example Only 1. Application A. Drill D c 3/8 " B. Material K c (1020STL) 290,000 See page 59 C. Tooling 1) Speed V c 150 SFM (Reference Tool Company or page 58) 2) Feed f n.009 ipr D. Stroke > 3-7/8 " 2. Parameters A. Thrust F f 230 (F r =.235 x D c x K c x f n ) B. Torque M c 367 (M c =.375 x D c x K c x f n ) C. HP P c 1.11 (P c = D c x K c x f n x V c /132,000) D. RPM N (N = SFM x 3.82 / D c ) 1528 3. Power feed unit selection When using standard unit, choose power source (air or hydraulic), spindle nose and RPM. Example: Assuming that we choose the shortest stroke unit that will work. Power Source Model Thrust Torque HP RPM Pneumatic FD56-100 345# 550 in-lb 2 1528 Hydraulic FD62-100 3000# 2 1528 Work Area 1. Application A. Drill D c B. Material K c C. Tooling 1) Speed V c 2) Feed f n D. Stroke > 2. Parameters A. Thrust F f B. Torque M c C. HP P c D. RPM N 3. Results Product Selection Work Area Pneumatic Drilling Units Model FD3-55 Spindle Options Pg. 50 ER16 JT1 JT2 Model FD3-80 Spindle Options Pg. 50 ER16 JT1 JT2 Model FD55-80 Spindle Options Pg. 50 ER20 JT6 Model FD56-100 Spindle Options Pg. 50 ER20 JT6 AS22 ER25 JT6Multi Hydraulic Drilling Units Model FD6-130 Spindle Options Pg. 51 ER20 JT6 AS22 MT3 ER25 JT6 Multi MT2 Model FD62-100 Spindle Options Pg. 51 ER20 JT6 AS22 ER25 JT6 Multi Model FD7-150 Spindle Options Pg. 52 AS32 ER40 FB30 MT3A MT3B MT3B Multi Model FD75-100 Spindle Options Pg. 52 ER40 FB30 MT3A Multi Model FD8-150 Spindle Options Pg. 52-53 ER40 FB30 NT40 ER50 MT4A MT4B MT4B Multi Model FD85-100 Spindle Options Pg. 53 FB30 MT4A MT4B Multi Tapping Units Model F2N-60 Spindle Options Pg. 53 ER16 JT1 Model F6N-60 Spindle Options Pg. 53 ER20 JT6 AS22 Model F7N-80 Spindle Options Pg. 53-54 AS32 MT3B Multi NT40 FB20 Model F8N-90 Spindle Options Pg. 54 MT4B Multi AS36 FB30 Model F85N-90 Spindle Options Pg. 54 FB30 Drilling-Tapping Units Model FTD63-120/80 Spindle Options Pg. 51 ER20 JT6* AS22 MT3 ER25 JT6 Multi MT2 Model FTD9-150/90 Spindle Options Pg. 54 Drilling Spindle Flange Only FB45 Tapping Spindle Flange Only FB45 56 www.hausemachines.com

WORKSHEET FOR ENGLISH UNITS For Example Only 1. Application A. Drill D c 3/8 " B. Material K c (1020STL) 290,000 See page 59 C. Tooling 1) Speed V c 150 SFM (Reference Tool Company or page 58) 2) Feed f n.009 ipr D. Stroke > 3-7/8 " 2. Parameters A. Thrust F f 230 (F r =.235 x D c x K c x f n ) B. Torque M c 367 (M c =.375 x D c x K c x f n ) C. HP P c 1.11 (P c = D c x K c x f n x V c /132,000) D. RPM N (N = SFM x 3.82 / D c ) 1528 3. Power feed unit selection When using standard unit, choose power source (air or hydraulic), spindle nose and RPM. Example: Assuming that we choose the shortest stroke unit that will work. Power Source Model Thrust HP RPM Air Hydraulic 2427 475# 2 3800 Hydraulic 6415 680# Servo Hydraulic 6629 2750# Work Area 1. Application A. Drill D c B. Material K c C. Tooling 1) Speed V c 2) Feed f n D. Stroke > 2. Parameters A. Thrust F f B. Torque M c C. HP P c D. RPM N 3. Results For Example Only (3 Shown) Specifying a Unit If using a taylor made unit for your needs. A. Choose Power Source Air Hydraulic Hydraulic Hydraulic Servo 2427 6415 6629 B. Choose Spindle (NOTE: Standard spindles for these units have 600 #/in torque capacity. - AK - BJ - SP #2 Morse 1-3/8 AA GQ 1-3/8 AA Coolant Through C. Choose Drive (NOTE: A high torque, low RPM situation has not occurred, no gear reduction required. On 6629 unit, coolant through was chosen. Please choose a coolant through drive for this application. (If using belt/pulley, choose -A inline) -A -A - C Inline Inline Coolant Through D. Choose Belt & Pulley from chart, using 5-step 3V pulley, 2.3 HP @ 1500 RPM is available using 1200 RPM motor. -A -G1530 -H 5-step pulley Single sheaves Timing belt 1:1 E. Choose Motor -M - Q -JJ 2HP 1200 3HP 1800 30A Servo F. Choose a Belt Housing -A1 - C1 - B1 G. Choose Special Options H. Model Numbers Are Specified 2427 AK A A M A1 6415 BJ A G1530 Q C1 Spindle Support 6629 SP C H JJ B1 (Coolant Through) Work Area Specify a Unit A. Choose Power Source B. Choose Spindle (pgs. 36-37) C. Choose Drive (pgs. 38-39) D. Choose Belt & Pulley (pgs. 40-41) E. Choose Motor (pgs. 42-44) F. Choose Belt Housing (pg. 45) G. Choose Special Options (pgs. 46-49) H. Model Numbers Are Specified Model Spindle Drive Belt/Pulley Motor Belt Housing Special www.hausemachines.com 57

TECHNICAL INFORMATION Drilling Speeds/Feeds Carbide Carbide Tin Carbide Str. HSCO Tin HSS 118 PT 140 PT Flute 120 PT 130 PT 118 PT Materials Examples Hardness SFM FC SFM FC SFM FC SFM FC SFM FC Low & Non-Alloy Steels 1010, 12L14 16 Rc 330 12 200 12 105 8 Steel & Cast Steel 1045, 8620 17-32 Rc 280 10 185 12 90 8 Steels 4140, 4340 33-40 Rc 235 8 120 8 40 40 5 Steels 4620, 5140 41-65 Rc 160 4 55 5 15 16 4 Hardened & Maraging Steels 300M 45-63 Rc 100 3 Hardened Steels 55-65 Rc Tool Steel, Unalloyed 1086, W1 32 Rc 245 9 130 12 45 6 Tool Steel, Low Alloyed 52100, L2 32 Rc 235 10 130 10 45 6 Tool Steel, High Alloyed A2, D2, H13 32 Rc 200 10 90 10 30 6 Stainless, Martensitic 400 Series 34 Rc 210 10 110 8 25 7 Stainless, Sulphered 300 Series 24 Rc 200 6 80 7 15 4 Stainless, Austenitic 300 Series, PH s 28 Rc 55 5 10 3 Manganese Armor Plate A 128(A) Super Alloys Ni & Co Based Inc., Hast. Nim < 27 Rc 55 4 15 1 Super Alloys Ni & Co Based Inc., Hast. Nim 27-38 Rc 25 3 5 3 Super Alloys Ni & Co Based Inc., Hast. Nim > 38 Rc Cast Iron A48-20B, 40B < 225 HB 185 8 315 16 410 12 200 16 90 10 Cast Iron A48-45B to 60 225-270 HB 150 8 260 16 330 12 160 16 70 10 Nodule & Ductile Iron GGG-40 to 60 < 150 HB 150 8 260 16 330 12 160 16 70 10 Nodule & Ductile Iron CG Iron 260 HB 115 6 210 16 125 12 50 9 Malleable Iron ASTM A502 350 HB 150 8 260 16 330 12 160 16 70 10 Chilled Cast Iron 400-600 HB Pure Copper 101 75 HB 425 7 560 7 315 12 160 10 Cu Ni Zn Alloys CuNi10Zn42Pb 180 HB 295 9 395 10 245 12 100 9 Brass Short Chipping Ms58 150 HB 360 12 525 16 690 16 360 12 200 10 Brass Long Chipping 51000 150 HB 360 9 525 12 260 12 125 9 Bronze, Soft CDA 65500 < 100 HB 330 9 490 12 260 12 115 9 Bronze, Special Ampco 8 16 200 HB 200 8 260 12 160 12 85 7 Bronze, Special Ampco 20 200-300 HB 80 3 165 5 125 7 54 5 Bronze, Special Ampco 20 26 > 300 HB 80 3 Al & Al Alloys Wrought 6061, 7075 < 140 HB 725 10 820 16 1315 16 360 16 220 12 Al Alloys 10% Si 355, 360 180 HB 560 10 655 16 855 16 210 12 140 12 Al Alloys 10 14% Si 385, 413 180 HB 490 10 590 16 790 16 160 12 100 10 Al Alloys > 14% Si A390, 393 180 HB 330 9 460 12 655 16 Ti & Ti Alloys 4900, 4902, 492 24 Rc 80 3 130 5 Ti Alloys 6AL 4V < 24 Rc 55 2 105 4 Zinc Alloys Zamak < 80 HB 490 9 655 16 360 16 220 12 Thermoplastics Plexiglas 130 12 150 12 125 12 Feed Curve Conversion Feed.060".160".250".315".400".625" Curve 1.5MM 4.0MM 6.3MM 8.0MM 10.0MM 16.0MM 16.002".006".010".012".014".019" 12.0018".005".008".010".011".015" 10.0015".004".006".0075".009".012" 9.0013".0035".0055".007".008".011" 8.0012".003".005".006".007".010" 7.0011".0027".0045".0055".006".009" 6.001".0025".004".005".0055".0075" 5.0007".002".003".004".004".006" 4.0006".0015".0025".003".0035".005" 3.0004".001".002".0025".003".0035" 2.0002".0008".001".0013".0015".0025" 58 www.hausemachines.com

TECHNICAL INFORMATION Specific Cutting Force k c for f z =.016 for Different Materials Material HB Specific Cutting Force, k c.016 * lbs/in. 2 Unalloyed Steel C = 0.15% 125 290,000 C = 0.35% 150 304,500 C = 0.60% 200 316,100 Low Alloy Steel Non-Hardened 180 304,500 Hardened and Tempered 275 402,400 Hardened and Tempered 300 402,300 Hardened and Tempered 350 402,300 High Alloy Steel Annealed 200 362,500 Hardened 325 543,100 Stainless Steel Martensitic/Ferritic 200 330,500 Austenitic 175 355,200 Steel Castings Unalloyed 180 261,000 Low Alloyed 200 304,500 High Alloyed 225 362,500 Hard Steel Hardened Steel 55 HRC 681,500 Manganese Steel 12% 250 522,000 Malleable Cast Iron Ferritic 130 137,700 Pearlitic 230 159,500 Grey Cast Iron Low Tensile Strength 180 159,500 High Tensile Strength 260 203,000 Nodular Cast Iron Ferritic 160 152,200 Pearlitic 250 253,700 Chilled Cast Iron 400 398,700 Heat Resistant Alloys Fe-base, Annealed 200 435,000 Fe-base, Aged 280 442,200 Ni- or Co-Base, Annealed 250 520,000 Ni- or Co-Base, Aged 350 540,000 Ni- or Co-Base, Cast 320 536,500 Aluminum Alloys Non Heat Treatable 60 72,500 Heat Treatable 100 116,000 Aluminum Alloys, Cast Non Heat Treatable 75 108,100 Heat Treatable 90 130,500 Copper and Copper Alloys Lead Alloys, Pb > 1% 110 101,500 Brass, Red Brass 90 101,500 Bronze and Leadfree Copper 100 253,150 Including Electrolytic Copper *The k c 0.4 -values are valid for: f 2 =.016 inch/z, K r = 90, sh = +6 www.hausemachines.com 59

809 South Pleasant St. Montpelier, OH 43543 tel: 419-485-3158 800-932-8665 fax: 419-485-3146 www.hausemachines.com 2003 Hause Machines 103/1558 www.hausemachines.com