31-37 High flow NAMUR valves G1/ and G1/ aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding High Flow Valve Actuation Range NAMUR Valves G1/" & G1/" Piped Valves G1/" & G1/" Banjo Valves G1/8" & G1/" for Control of Pneumatic Actuators FLUIDTECHNIK BOHEMIA s. r. o. Olomoucká 87 tel : 58 13 33-35 CZ-67 00 Brno fax : 58 13 38 http://www.fl uidbohemia.cz brno@fl uidbohemia.cz
Market Description High flow NAMUR valves G1/ and G1/ Process industries Chemical, Petrochemical industries Oil & Gas Water & Sewage Pulp & Paper Food & Beverage Pharmaceutical industry Powder Dosing-Transportation Air Dryers Description of Applications Control of single or double acting pneumatic actuators, in safe or dangerous areas. NAMUR Interfaces 1/" & 1/" The interface design is conform to the NAMUR standard and to the VDI/VDE 385 recommendations of the actuator industry. It allows a compact design of the actuator/valve unit. In case of a 3/ function, the air of the actuator spring chamber also flows through the pilot valve (re-breather function). This prevents corrosion of the actuator springs. D1 F M T "" "" D D3 F T D1 mm D mm D3 D min. M mm mm mm D M5 1/ 3 8 1 M5 M6 1/ 5 0 10 16 M6 F: mounting holes - T: actuators control port - M: holes for dowel pins Ra 3. Catalogue 1101/UK - Ed. August 010
Customer Value Proposition High flow NAMUR valves G1/ and G1/ High flow: 1.50 l/min (1/"), 3.000 l/min (1/") Compact design Long life expectancy N3x & P3x Series compatible with any Parker Lucifer coil (ATEX or not) of electrical group (8/9 W coils) Fail safe standard Reduced inventory (3/ & 5/ functions with the same valve on 31Nx5 series) Mechanical part of the valve ATEX certified according standard EN 1363-1 & -5 General Information Function: Manual override: 3/, 5/, 3/ <=> 5/ and 5/3 valves. Standard on all versions. Design: Nxx & Pxx Series: Solenoid operated spool valve with combined spring and air return & external air pressure operated versions. B0x Series: Solenoid direct acting valve with spring return. Mounting: Nxx Series: For direct mounting on NAMUR interface 1/" & 1/" Pxx Series: Piped valves G1/" & G1/" Bxx Series: Equiped with a banjo bolt G1/8" or G1/" Mounting position: Indifferent. Material specifications: Aluminium body. Internal parts of stainless steel. Sealing material from NBR. Range of admissible pressure drop: Δp min. = see table. Δp max. = 10 bar. Media: Dry or lubricated air. Fluid temperature: Min. 0 C Max. + 50 C Ambient temperature: -10 C to +50 C Electrical part: N0x / P0x / Bxx Series are compatible with mm coil 96131 / 968 / 96637 series N3x / P3x Series are compatible with 3/37/0 mm coils part of electrical group (8/9W), including 81865 / 95870 / 95905 Series. Solenoid duty: 100% ED. Voltage: 81865 coil: 1 VDC, VDC, 8 VDC, 110VDC, V / 50 AC, 8 V / 50 AC, 110 V / 50 AC, 0-30V/50 AC, 115 V / 60 Hz AC, 30 V / 60 AC. Voltage tolerance: ± 10% of nominal for 81865 coil. Class of insulation material: Class F for 81865 coil. Standards: Mechanical ATEX conform to EN 1363-1 & -5. 3 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ NAMUR Valves G1/" Series Solenoid Operated Versions N03-N05 Series with mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Dimensions (bar) disc number Power (g) Reference (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 3/ Solenoid operated - Combined spring & air return (monostable) 1/ 7 150.5 10 10 50 NBR 331N03-96131 3 3 300 1 1/ 7 150.5 10 10 50 NBR 331N03-968 3 3 300 1 1/ 7 150.5 10 10 50 NBR 331N03-96637 3 3 300 1 3 1 5/ Solenoid operated - Combined spring & air return (monostable) 1/ 7 150.5 10 10 50 NBR 31N03-96131 3 3 300 1/ 7 150.5 10 10 50 NBR 31N03-968 3 3 300 1/ 7 150.5 10 10 50 NBR 31N03-96637 3 3 300 3/ <=> 5/ with conversion plate - Solenoid operated Combined spring & air return (monostable) 3 1 1/ 7 150.5 10 10 50 NBR 31N05-96131 3 3 310 3 1/ 7 150.5 10 10 50 NBR 31N05-968 3 3 310 3 1/ 7 150.5 10 10 50 NBR 31N05-96637 3 3 310 3 5/ Solenoid operated and return (bistable) 1/ 7 150.5 10 10 50 NBR 37N03-96131 3 3 30 1/ 7 150.5 10 10 50 NBR 37N03-968 3 3 30 1/ 7 150.5 10 10 50 NBR 37N03-96637 3 3 30 5/3 W1 closed in center position - Solenoid operated and return 1/ 7 150.5 10 10 50 NBR 3N03-96131 3 3 30 1/ 7 150.5 10 10 50 NBR 3N03-968 3 3 30 1/ 7 150.5 10 10 50 NBR 3N03-96637 3 3 30 5/3 W3 exhausted in center position Solenoid operated and return 1/ 7 150.5 10 10 50 NBR 33N03-96131 3 3 30 1/ 7 150.5 10 10 50 NBR 33N03-968 3 3 30 1/ 7 150.5 10 10 50 NBR 33N03-96637 3 3 30 Please consult the "How to Order" part at the end of each coil chapter. Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Dimensions Reference 1 Dimensions Reference 50 50 0 3 3 0 Dimensions Reference 3 Dimensions Reference 3 0 0 67 67 67 67 67 1 10 1 1 3 3 3 3 3 36.5 86 36.5 86 13 13 13 13 3 1 5 3 G1/" (x) M5 7. 7. G1/" (3x) M5 50 50 50 3 1 1 3 3 3 3 3 36,5 90 10 13 13 13 13 5 3 5 3 G1/" (3x) M5 7. G1/" (3x) M5 7. 5 Catalogue 1101/UK - Ed. August 010
NAMUR Valves G1/" Series Solenoid Operated Versions N33-N35 Series with 3 / 37 / 0 mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Elect. Dim. (bar) disc number Power (g) Group Ref. (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases Pneumatic systems - valves and valve islands High flow NAMUR valves G1/ and G1/ 3/ <=> 5/ with conversion plate - Solenoid operated Combined spring & air return (monostable) 3 1 1/ 7 150.5 10 10 50 NBR 31N35 995 81865 9 8 80 5 1/ 7 150.5 10 10 50 NBR 31N35 995 95870 9 8 700-1/ 7 150.5 10 10 50 NBR 31N35-95905 8 8 70-5/ Solenoid operated and return (bistable) 1/ 7 150.5 10 10 50 NBR 37N33 995 81865 9 8 750 6 1/ 7 150.5 10 10 50 NBR 37N33 995 95870 9 8 1190-1/ 7 150.5 10 10 50 NBR 37N33-95905 8 8 170-5/3 W1 Closed in center position Solenoid operated and return 1/ 7 150.5 10 10 50 NBR 3N33 995 81865 9 8 750 6 1/ 7 150.5 10 10 50 NBR 3N33 995 95870 9 8 1190-1/ 7 150.5 10 10 50 NBR 3N33-95905 8 8 170 - Dimensions Reference 5 Dimensions Reference 6 13 13 3 0 1 1 3 0 3 3 3 3 100 130 19.5 19.5 3 G1/8" 3 G1/8" 97 87 38 DIN 3650A 38 DIN 3650A 13 13 5 3 5 3 3 7. G1/" (3x) M5 7.5 G1/" (3x) M5 Please consult the "How to Order" part at the end of each coil chapter. 6 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ NAMUR Valves G1/" Series Solenoid Operated Versions N0 Versions with mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Dimensions (bar) disc number Power (g) Reference (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 3/ Solenoid operated Combined spring & air return (monostable) 1 1 1/ 1 3000.5 10 10 50 NBR 331N0-96131 3 3 910 670 10 1/ 1 3000.5 10 10 50 NBR 331N0-968 3 3 1130 670 10 1/ 1 3000.5 10 10 50 NBR 331N0-96637 3 3 1170 670 10 5/ Solenoid operated Combined spring & air return (monostable) 1/ 1 3000.5 10 10 50 NBR 31N0-96131 3 3 900 80 11 1/ 1 3000.5 10 10 50 NBR 31N0-968 3 3 110 80 11 1/ 1 3000.5 10 10 50 NBR 31N0-96637 3 3 1160 80 11 5/ Solenoid operated and return (bistable) 1 17 1/ 1 3000.5 10 10 50 NBR 37N0-96131 3 3 10 80 1 1/ 1 3000.5 10 10 50 NBR 37N0-968 3 3 1680 80 1 1/ 1 3000.5 10 10 50 NBR 37N0-96637 3 3 1760 80 1 Dimensions Reference 10 Dimensions Reference 11 Dimensions Reference 1 Please consult the "How to Order" part at the end of each coil chapter. 8 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ NAMUR Valves G1/" Series Solenoid Operated Versions N3 Series with 3 / 37 / 0 mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Elect. Dim. (bar) disc number Power (g) Group Ref. (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 3/ Solenoid operated Combined spring & air return (monostable) 1/ 1 3000.5 10 10 50 NBR 331N3 995 81865 9 8 910 13 1/ 1 3000.5 10 10 50 NBR 331N3 995 95870 9 8 1130-1/ 1 3000.5 10 10 50 NBR 331N3-95905 8 8 1170-3 1 5/ Solenoid operated Combined spring & air return (monostable) 1/ 1 3000.5 10 10 50 NBR 31N3 995 81865 9 8 900 1 1/ 1 3000.5 10 10 50 NBR 31N3 995 95870 9 8 110-1/ 1 3000.5 10 10 50 NBR 31N3-95905 8 8 1160-5/ Solenoid operated and return (bistable) 1/ 1 3000.5 10 10 50 NBR 37N3 995 81865 9 8 10 15 1/ 1 3000.5 10 10 50 NBR 37N3 995 95870 9 8 1680-1/ 1 3000.5 10 10 50 NBR 37N3-95905 8 8 1760 - Dimensions Reference 13 Dimensions Reference 1 Dimensions Reference 15 Please consult the "How to Order" part at the end of each coil chapter. 9 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Piped Valves - G1/ Series Solenoid Operated Versions P03 Versions with mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Dimensions (bar) disc number Power (g) Reference (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 5/ Solenoid operated Combined spring & air return (monostable) 1 1/ 7 150.5 10 10 50 NBR 31P03-96131 3 3 50 18 1/ 7 150.5 10 10 50 NBR 31P03-968 3 3 50 18 1/ 7 150.5 10 10 50 NBR 31P03-96637 3 3 50 18 5/ Solenoid operated and return (bistable) 1 17 1/ 7 150.5 10 10 50 NBR 37P03-96131 3 3 350 19 1/ 7 150.5 10 10 50 NBR 37P03-968 3 3 350 19 1/ 7 150.5 10 10 50 NBR 37P03-96637 3 3 350 19 Dimensions Reference 18 Dimensions Reference 19 Please consult the "How to Order" part at the end of each coil chapter. 11 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Piped Valves - G1/ Series Solenoid Operated Versions P33 Versions with 3-37-0 mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Elect. Dim. (bar) disc number Power (g) Group Ref. (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 5/ Solenoid operated Combined spring & air return (monostable) 1 1/ 7 150.5 10 10 50 NBR 31P33 995 81865 9 8 70 0 1/ 7 150.5 10 10 50 NBR 31P33 995 95870 9 8 690-1/ 7 150.5 10 10 50 NBR 31P33-95905 8 8 730-5/ Solenoid operated and return (bistable) 1 17 1/ 7 150.5 10 10 50 NBR 37P33 995 81865 9 8 750 1 1/ 7 150.5 10 10 50 NBR 37P33 995 95870 9 8 1190-1/ 7 150.5 10 10 50 NBR 37P33-95905 8 8 170 - Dimensions Reference 0 Dimensions Reference 1 Please consult the "How to Order" part at the end of each coil chapter. 1 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Piped Valves - G1/ Series Solenoid Operated Versions P0 Versions with mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Dimensions (bar) disc number Power (g) Reference (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 5/ Solenoid operated Combined spring & air return (monostable) 1 1/ 1 3000.5 10 10 50 NBR 31P0-96131 3 3 670 1/ 1 3000.5 10 10 50 NBR 31P0-968 3 3 670 1/ 1 3000.5 10 10 50 NBR 31P0-96637 3 3 670 5/ Solenoid operated and return (bistable) 1 17 1/ 1 3000.5 10 10 50 NBR 37P0-96131 3 3 80 3 1/ 1 3000.5 10 10 50 NBR 37P0-968 3 3 80 3 1/ 1 3000.5 10 10 50 NBR 37P0-96637 3 3 80 3 Dimensions Reference Dimensions Reference 3 Please consult the "How to Order" part at the end of each coil chapter. 13 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Piped Valves - G1/ Series Solenoid Operated Versions P3 Versions with 3/37/0 mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Elect. Dim. (bar) disc number Power (g) Group Ref. (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 5/ Solenoid operated Combined spring & air return (monostable) 1 1/ 1 3000.5 10 10 50 NBR 31P3 995 81865 9 8 900 1/ 1 3000.5 10 10 50 NBR 31P3 995 95870 9 8 110-1/ 1 3000.5 10 10 50 NBR 31P3-95905 8 8 1160-5/ Solenoid operated and return (bistable) 1 17 1/ 1 3000.5 10 10 50 NBR 37P3 995 81865 9 8 10 5 1/ 1 3000.5 10 10 50 NBR 37P3 995 95870 9 8 1680-1/ 1 3000.5 10 10 50 NBR 37P3-95905 8 8 1760 - Dimensions Reference Dimensions Reference 5 Please consult the "How to Order" part at the end of each coil chapter. 1 Catalogue 1101/UK - Ed. August 010
Banjo Valves - G1/ & G1/8 Series Solenoid Operated Versions B03-B0 Versions with mm Coil Admissible Max. admissible differential fluid Port size Orifice Q N pressure temperature Seat Reference Consumption Weight Dimensions (bar) disc number Power (g) Reference (ºC) (Watt) max. min. = 0ºC G mm l/min min DC= AC~ Air & Valve Housing Coil DC AC Neutral gases 3/ Solenoid operated - Spring return (monostable) 1/8 1. 50 0 10 10 50 NBR 131B1-96131 3 3 10 6 1/8 1. 50 0 10 10 50 NBR 131B1-968 3 3 10 6 1/8 1. 50 0 10 10 50 NBR 131B1-96637 3 3 10 6 3/ Solenoid operated - Spring return (monostable) Pneumatic systems - valves and valve islands High flow NAMUR valves G1/ and G1/ 1/ 1. 50 0 10 10 50 NBR 131B0-96131 3 3 160 7 1/ 1. 50 0 10 10 50 NBR 131B0-968 3 3 160 7 1/ 1. 50 0 10 10 50 NBR 131B0-96637 3 3 160 7 1 1 3 3 1 1 Dimensions Reference 6 Dimensions Reference 7 Please consult the "How to Order" part at the end of each coil chapter. 15 Catalogue 1101/UK - Ed. August 010
Coils and Spare Parts Informations Pneumatic systems - valves and valve islands High flow NAMUR valves G1/ and G1/ Safe Area & ATEX Zone Coils mm for N03-N05 Series Safe Area & ATEX Zone Ref. 96131 / 968 / 96637 These coils with connection for P+G DIN 3650 B plug are encapsulated in synthetic material, conform to the IEC/CENELEC safety standards and comply with European low voltage directive 73/3/EC. Power: 3W Insulation Class: F (155 C) Degree of Protection: IP65 (with plug) Duty Cycle: 100% ED Ambient Temperature: -10 C to 50 C 3 different types are available: Ref. 96131 for a safe area without plug Ref. 968 for a safe area with plug Ref. 96637 for an ATEX area Zone 96637 coil series with connection P + G when mounted together with the supplied Pg9 plug (delivered with the coil) are suitable for use in dangerous areas (dust Zone ) according to the European directive ATEX 9/9/C. Protection mode: Ex td A IP65 - T95 C Available Safe area Safe area ATEX Voltages without DIN plug with DIN plug Zone EX II 3D Order Order Order Code Code Code 1 VDC 96131 C1 968 C1 96637 C1 VDC 96131 C 968 C 96637 C 8 VDC 96131 C 968 C 96637 C 110 VDC 96131 C5 968 C5 96637 C5 /50-60 VAC 96131 P0 968 P0 96637 P0 8/50-60 VAC 96131 S 968 S 96637 S 110/50-60 VAC 96131 P 968 P 96637 P 115/60 VAC 96131 K8 968 K8 96637 K8 30/50-60 VAC 96131 P9 968 P9 96637 P9 How to Order The housing kit is already included into the coil reference, so it s not needed to add it with the order code: Valve Reference Number - Coil Reference - Voltage code = Order code Example: 31N03-96131 C Valves and coils may be ordered also separately. 16 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Coils 3 mm / 37 mm / 0 mm for N33-N3-N35 Series Safe Area Ref. 81865 N3x series are compatible with any Parker Lucifer coil part of electrical group. That group includes many different coils for safe areas or areas submitted to ATEX certifications. These coils are part of the 8/9W class. These coils with connection for P+G DIN 3650 A plug are encapsulated in synthetic material, conform to the IEC/CENELEC safety standards and comply with European low voltage directive 73/3/EC. Safe Area Power: 8W (AC) 9W (DC) Insulation Class: F (155 C) Degree of Protection: IP65 (with plug) Duty Cycle: 100% ED Voltage Tolerance -10% / +10% Ambient Temperature -0 C / +50 C The application can be limited also by the temperature range of the valve Available Order Voltages Code 1 VDC 81865 C1 VDC 81865 C 8 VDC 81865 C 110 VDC 81865 C5 /50 VAC 81865 A 8/50 VAC 81865 A 110/50 VAC 81865 A5 0-30/50 VAC 81865 3D 380/50 VAC 81865 A9 /60 VAC 81865 B 115/60 VAC 81865 K8 30/60 VAC 81865 J3 How to Order This coil must be used together with a housing kit which includes a nut, a plate, and a washer. Housing Kit Order Code: 995 Valve Reference Number - Housing Reference - Coil Reference - Voltage Code = Order Code Example: 31N35-995 - 81865 C Valves and coils may be ordered also separately. 17 Catalogue 1101/UK - Ed. August 010
Coils and Spare Parts Informations Pneumatic systems - valves and valve islands High flow NAMUR valves G1/ and G1/ Safe Area Coils 3 mm / 37 mm / 0 mm for N33-N3-N35 Series Safe Area Coil 81000 Series with 538 Watertight and dust proof housing IP67 Ref. 81000 Coil 81000 series is encapsulated in synthetic material. Electrical connection is made with screw terminals for wire up to 1.5 mm. This coil conforms to the IEC/CENELEC safety standards and complies with European low voltage directive 73/3/EC. It must be used with a metallic housing. Power: 8W Insulation Class: F (155 C) Degree of Protection: IP67 (with 538 housing) Duty Cycle: 100% Voltage Tolerance -10%/+10% Ambient Temperature -0 C/+50 C The application can be limited also by the temperature range of the valve Available Order Voltages Code 1 VDC 81000 C1 VDC 81000 C 8 VDC 81000 C 110 VDC 81000 C5 /50 VAC 81000 A 8/50 VAC 81000 A 110-115/50 VAC 81000 OA 0-30/50 VAC 81000 3D 380/50-0/60 VAC 81000 5P /60 VAC 81000 B 110-115/60 VAC 81000 6J 0-0/60 VAC 81000 K /50-8/60 VAC 81000 S7 Housing 538 This enclosure is dust and water proof. It corresponds to the protection degree IP67 according to IEC/ EN6059. Corrosion resistant, the metallic housing offers good protection for the coil against shocks. It can be 360 orientable. This housing must be equipped with 81000 series coil. Material: galvanized passivated steel - Degree of protection IP67 according to IEC/EN 6059 - Electrical connection: cable connection by cable gland according to DIN630. Cable with outer diameter 6.5-13.5 mm (M0x1.5) can be simply sealed using a rubber gland resilient sealing rings. The enclosure is internally and externally fitted with grounding and earthing screw terminals. How to Order Valve Reference Number - Housing Reference - Coil Reference - Voltage Code = Order Code Example: 331N3-538 - 81000C Valves and coils may be ordered also separately. 18 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Coils 3 mm / 37 mm / 0 mm for N33-N3-N35 Series ATEX Zone - Ref. 95870 This coil with connection P+G - when mounted together with the supplied Pg 9 plug (delivered with the coil), is suitable for use in Gas and Dust dangerous areas (Zone -), according to the European directive ATEX 9/9/C. Certificate LCIE 05 ATEX 6003 X - Protection mode: non sparking / limited energy solenoid II 3 G - Ex nac IIC T3 / T II 3 D - Ex td A IP65 - T 195 C / T 130 C Power: 8W (AC) 9W (DC) Insulation Class: F (155 C) Degree of Protection: IP65 (with plug) Duty Cycle: 100% ED Voltage Tolerance -10%/+10% Ambient temperature T3 (gaz) T 195 C (dust) -0 C/+65 C T (gaz) T 130 C (dust) -0 C/+50 C The application can be limited also by the temperature range of the valve 0081 II 3 G-D ATEX Zone - Available Order Voltages Code VDC 95870 C 8 VDC 95870 C 110 VDC 95870 C5 /50 VAC 95870 A 8/50 VAC 95870 A 110/50 VAC 95870 A5 0-30/50 VAC 95870 3D How to Order This coil must be used together with a housing kit which includes a nut, a plate, and a washer. Housing kit order code: 995 Valve Reference Number - Coil Reference - Voltage code = Order code Example: 331N3-995 - 95870 A5 Valves and coils may be ordered also separately. 19 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ ATEX zone 1-1 Coils 3 mm / 37 mm / 0 mm for N33-N3-N35 Series ATEX Zone 1-1 Ref. 95905 This coil is suitable for use in Gas and Dust dangerous areas (Zone 1-1), according to the European directive ATEX 9/9/C. It s also IECEx certified according to the IECEx Scheme. Certificate LCIE 0 ATEX 651 X - Protection modes: Explosionproof solenoids with flameproof enclosure / encapsulation "d mb" II G - Ex d mb IIC T II D - Ex td A1 IP67 - T 130 C Insulation Class H (180 C) Power: 8W (AC-DC) Degree of Protection IP67 Duty Cycle 100% Voltage Tolerance -10%/+10% Ambient Temperature: -0 C/+65 C The application can be limited also by the temperature range of the valve 0081 II G/D Available Order Voltages Code VDC 95905 C 8 VDC 95905 C 110 VDC 95905 C5 /50 VAC 95905 A 8/50 VAC 95905 A 110/50 VAC 95905 E5 0-30/50 VAC 95905 3D 115/60 95905 E5 0/60 95905 B8 Electric connection is done in the connection ct box on an easily accessible connector terminals. M0x1.5 Cable gland How to Order The housing kit is already included into the coil reference, so it s not needed to add it in the order code: Valve Reference Number - Coil Reference - Voltage code = Order code Example: 37N33-95905 C Valves and coils may be ordered also separately. 0 Catalogue 1101/UK - Ed. August 010
High flow NAMUR valves G1/ and G1/ Coils 3 mm / 37 mm / 0 mm for N33-N3-N35 Series ATEX Solutions Zone 1-1 Ref. 83371 & 900 These coils are suitable for use in Gas and Dust dangerous areas (Zone 1-1), according to the European directive ATEX 9/9/C. Protection mode: encapsulated electrical parts with increased safety. Reference 83371 or HZ06 900 or HZ3 Approval LCIE 0 ATEX 6011 X LCIE 0 ATEX 6013 X Type of Gas II G - Ex e mb II T II G - Ex e mb II T3 II G - Ex e mb II T protection Dust II D - Ex td A1 T 130 C II D - Ex td A1 T 195 C II D - Ex td A1 T 130 C Degree of protection IP67 IP67 Ambiant temperature -0 C to +65 C -0 C to +90 C -0 C to +65 C The application is limited also by the temperature range of the valve Class of insulation F (155 ) H (180 ) Electrical connection By special cable gland or M0x1.5 "Ex e" on screw terminals for wires up to 1.5 mm². Cables with outside diameter 6.5 mm to 13.5 mm can be simply sealed using the rubber gland with resilient sealing rings supplied. Elect. DC Pn (hot) 8 W 8 W Power P (cold) 0 C 9 W 9 W AC Pn (holding) 8 W 8 W 3 VA (9 W) 3 VA (9 W) Voltage tolerance Tolerance -10/ +10% of the nominal voltage Solenoid duty Continuous duty solenoid (ED 100%) ATEX Zone 1-1 Available Order Order Voltages Code Code 6 VDC 83371 C0-1 VDC 83371 C1 - VDC 83371 C 900 C 36 VDC 83371 C3-8 VDC 83371 C - 60 VDC 83371 M3-110 VDC 83371 C5-15 VDC 83371 3N 900 3N 0 VDC 83371 C7 900 C7 1/50 VAC 83371 A1 - /50 VAC 83371 A 900 A 8/50 VAC 83371 A - 110-115/50 VAC 83371 OA 900 OA 0-30/50 83371 3D 900 3D /60 VAC 83371 B - 110-115/60 VAC 83371 6J - 0-0/60 VAC 83371 K - 380/50-0/60 VAC - 900 5P Fuses: Both electrical 83371 and 900 parts have to be connected in series with a safety fuse according to CEI 6017-3. 83371 DC: V / 00mA - 8V / 50mA 110V / 100mA AC: V / 630mA - 8V / 315mA 110/115V / 160mA 0/30V / 80mA 900 DC: V / 00mA - 15V / 80mA 8V /0V - 63mA AC: V / 630mA - 8V / 315mA 110/115V / 160mA 0/30V / 80mA How to Order The housing kit is already included into the coil reference, so it s not needed to add it in the order code: Valve Reference Number - Coil Reference - Voltage code = Order code Example: 37N33-83371C Valves and coils may be ordered also separately. 1 Catalogue 1101/UK - Ed. August 010
FLUIDTECHNIK BOHEMIA, s. r. o., Olomoucká 87, 67 00 BRNO, tel.: +0 58 13 33-5, +0 58 6 811, fax: +0 58 13 38 NOVÉ MÌSTO NAD METUJÍ Vrchoviny 9, 59 01, tel./fax: 91 7 8, tel.: 91 7 3 OPAVA Hradecká 668/1, 76 01, tel.: 553 770 911, fax: 553 770 91 LOUNY Vladimírská 57, 0 01, tel./fax: 15 658 703 E-mail: brno@fluidbohemia.cz www.parker-origa.cz NON STOP linka technické podpory: 58 6 83