9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated valves have been manufactured in the sizes 1, and 3, as recommended by the ISO Standards. Three different types of sub-base are available: - single sub-base with side ports - single sub-base with rear ports - manifold sub-base with common exhausts complete with end blocks. The Series 9 solenoid valves are also constructed so as to be actuated in different ways : - electrical actuation spring return - electrical actuation and pneumatic spring return - electrical actuation and return - pneumatic actuation and spring return - pneumatic actuation and return - pneumatic actuation and differential pneumatic return. GENERAL DATA Construction Valve group Materials Mounting Size Installation Operating temperature Lubricant spool - type (servocontrolled) 5/ and 5/3 way / pos. aluminium body, stainless steel spool, NBR seals threaded holes in sub-base 1, and 3 in any position 0 60 C (using dry air at -0 C) oil compatible with NBR (3-10 E)
S E R I E S 9 PNEUMATIC DATA Operating pressure Nominal pressure max. press. 10 bar (for minimum pressures see descriptions) 6 bar Nominal flow * Qn Size 1 = 900 Nl/min; * Qn = determined with supply pressure of 6 bar and with p = 1 bar. ELECTRICAL DATA Fluid Voltage Power consumption Class of insulation Duty cylce filtered air AC: see coding DC: see coding Size = 1610 Nl/min; Size 3 = 3700 Nl/min AC at inrush for A70 = 8.5 VA (for A80 = 7.5 VA) during operation for A70 = 6.5 VA (for A80 = 5 VA) DC for A70 = 5 W (for A80 = 4 W) Class H 100%, continuous operation Voltage tolerance AC + 10% -15%, DC ± 10% Protection class IP54 DIN 40050 (IP65 with DIN 43650/PG9 connector) Connector mod. 1-800, mod. 14-800 CODING OF SERIES 9 SOLENID VALVES WITH SUB-BASE SERIES 9 NO OF WAYS/POSITIONS 5 = 5/ 6 = 5/3 Close centres 7 = 5/3 Open centres SUB-BASE C = ISO (manifold outlets) F = ISO (single sub-base, side ports) G = ISO (single sub-base, rear ports) N = ISO (front outlet interface) N1A = front outlet sub-base N OF SUB-BASE A = 1 *F = 6 *B = *G = 7 *C = 3 *H = 8 *D = 4 *K = 9 *E = 5 *L = 10 *M= 11 *N = 1 *P = 13 *R = 14 *S = 15 SIZE 1 = Size 1 = Size 3 = Size 3 PORTS (OUTLETS) 1 = G1/4 = G3/8 3= G1/ 951-C1B-P16-3-A77-S ACTUATION 33 = pneumatic, pneumatic return 34 = pneumatic, differential pneumatic return 35 = pneumatic, mechanical spring return P11 = double solenoid (horizontal solenoids) P15 = single solenoid, spring return (horizontal solenoids) P16 = solenoid, pneumatic spring return(horizontal solenoids) SPECIAL S = Special to be specified ** SOLENOID VOLTAGE A70 G70 A80 G90 H = 4V 50/60Hz - - - K = 110V 50/60Hz - - - J = 0V 50/60Hz - - - 7 = 4V RC - - - ** For other tensions please contact our technical dept. SOLENOID MATERIAL A = PPS G = Nylon SOLENOID 7 = x 8 = 30 x 30 SOLENOID INTERFACE 3 = A531 - BC * Complete with two end-blocks 900-H or 900-HN. 00
9 S E R I E S 5/ - way solenoid valves, ISO 1, ISO, ISO 3, monostable The Series 9 solenoid valves with an ISO interface, size 1, and 3, which have electropneumatic actuation and spring return, are suitable for mounting on a sub-base. For electrical actuation, types of solenoid, A70 and A80, are available with a wide range of voltages and power consumptions. The minimum operating pressure is.5 bar. Connector 1-800 or 14-800. Note: Packaging with ISO solenoid valves includes interface seals and fixing screws. 951-000-P15-3-A00* 95-000-P15-3-A00* 953-000-P15-3-A00* 951-000-P16-3-A00* 95-000-P16-3-A00* 953-000-P16-3-A00* * choose solenoid required. Size B L1 L L3 H H1 H ISO 1 38 153 108 146 3 43 58 51 173 18 166 33 44 59 3 65 18 173 11 45 56 71 5/ - way, 5/3 - way valves, ISO 1, ISO, ISO 3, bistable The Series 9 solenoid valves which have an ISO interface, size 1, and 3, and which have electropneumatic actuation and return are suitable for mounting on a base-piece. For electrical actuation, types of solenoid, A70 and A80, are available with a wide range of voltages and power consumptions. The minimum operating pressure is bar. Connector 1-800 or 14-800. Note: Packaging with ISO solenoid valves includes interface seals and fixing screws. 951-000-P11-3-A00* 95-000-P11-3-A00* 953-000-P11-3-A00* 961-000-P11-3-A00* 96-000-P11-3-A00* 963-000-P11-3-A00* 971-000-P11-3-A00* 97-000-P11-3-A00* 973-000-P11-3-A00* * choose solenoid required. Size B L1 L L3 H H1 H ISO 1 38 08 118 194 3 43 58 51 8 138 14 33 44 59 3 65 73 183 59 45 56 71 003
S E R I E S 9 5/ - way valves, ISO 1, ISO, ISO 3, monostable, bistable The Series 9 valves with ISO interface, size 1, and 3, are available with the following types of actuation: - pneumatic, with spring return (min. press..5 bar) - pneumatic actuation and differential return (min. press. bar) - pneumatic actuation and return (min. press. bar). Note: Packaging with ISO solenoid valves includes interface seals and fixing screws. 951-000-35 95-000-35 953-000-35 951-000-34 95-000-34 953-000-34 951-000-33 95-000-33 953-000-33 Size ISO B L H 1 38 98 3 51 118 33 3 65 163 45 5/3 - way valve, ISO 1, ISO, ISO 3, monostable, with stable central position The Series 9 valves with ISO interface, size l, and 3, are available with pneumatic actuation and central resetting by a spring. There are two types of function: - with closed centres - with open centres. The minimum operating pressure is.5 bar. Note: Packaging with ISO solenoid valves includes interface seals and fixing screws. 961-000-33 96-000-33 963-000-33 971-000-33 97-000-33 973-000-33 Size ISO B L H 1 38 108 3 51 18 33 3 65 173 45 Manifold assembly 004
9 S E R I E S Single sub - base side outlets (VDMA 4345) 901-F1A 90-FA 903-F3A Size A B C D E F G H H1 H L L1 O R1 R S 1 43 4 58 1.5 10.5 10.5 3.5 48 3 10 110 84 5.5 G1/8 G1/4 98. 56 30 74 6 14 14 30 57 40 13 14 95 6.5 G1/8 G3/8 11. 3 68 3 90 17 17 17 71 3 18 149 119 6.5 G1/8 G1/ 136. Single sub - base with rear outlets (VDMA 4345) 901-G1A 90-GA 903-G3A Interface DIN ISO 5599/1 Interface DIN ISO 5599/1 Size ISO A B C D E H H1 H L L1 M N O P R R1 R S T 1 46 3 61 3 7.5 46 30 10 110 84 18 36 5.5 8 M5 G1/8 G1/4 98 5. 56 8 7 8 8 56 35 13 14 95 4 48 6.5 38 M6 G1/8 G3/8 11 6.5. 3 68 34 90 34 10 71 3 18 149 119 3 64 6.5 48 M8 G1/8 G1/ 136 9. 005
S E R I E S 9 Manifold sub - base with common exhausts and inlet (VDMA 4345) 901-C1A 90-CA 903-C3A End block for manifold sub - base (VDMA 4345) Size B C H H1 L L1 O P1 P P3 P4 R1 R R3 S V V1 V 1 6 8.5 43 44 110 85 5.5 1.5 3 7.5 71 G1/8 G1/4 M5 95 8 8 6. 30 9 56 45 135 100 6.5 5 3 6 86 G1/8 G3/8 M6 115 11 11 8. 3 38 10 71 54 190 140 9 6 3 8 130 G1/8 G1/ M8 168 13 13 8. 901-H1 (coppia) 90-H (coppia) 903-H3 (coppia) Interface DIN ISO 5599/1 Size A A1 H H1 H H3 H4 L O O1 P P1 R ør1 ør S T V 1 56 48 46 5 110 5.5 7 8 11 G3/8 15.1 95 6. 68 63 6 47 3 5 4 135 6.5 9 35 13 G1/ 18.5 8.7 115 8. 3 104 94 30 56 5 5 190 9 1 5 15 G1 8 38 168.7 8. 006
9 S E R I E S End block with front outlets (VDMA 4345) 901-N1 90-N 903-N3 Size A B D H H1 H H3 L O P P1 P P3 P4 R T 1 6 19 4 37 7.5 1.5 110 5.5 3 71 95 5 1 G1/4 1.4. 30 9 3 55 40 6 5 135 6.5 3 86 115 6 14 G3/8 1.4. 3 38 36 7 70 45 8 6 190 9 3 130 168 9 17 G1/ 1.4. Assembly of manifold sub - base (VDMA 4345) Taglia A B C D E OR UNI 5739 UNI 5588 H L O F G G1 1 n D+C n D+C 43 8 3068 M5x0 M5 46 110 7 n D+C n D+C 6 56 35 3093 M6x5 M6 47 135 9 3 n D+C n D+C 30 71 5 415 M8x5 M8 56 190 1 007
S E R I E S 9 Manifold bases with common inlet and exhaust ports and with outlet ports on the front Size A B C D E F G H L M N P R S T 901-N1A 1 1.5 96 5 1 19 5 96 43 110 36 5.5 5.5 M5 G1/4 6. End blocks for manifold bases with front outlets Size A B C D E F G H L M N P P1 R S T U Z 901-HN1 (1 pair) 1 56 14.5 8 3 48.5 6 4 110 9 8 5.5 1 3/8" 96 G1/8 5.5 3.5 Part 1 Part 14 008
9 S E R I E S 901-TP Complete with seals and screws. Assembly example 901-C1A/TP 90-CA/TP 901-N1A/T P-R-S plugged. Mounting example for manifold sub - base Note: For correct asembly of the manifold interface seal, follow the instructions of the drawing below. Assembly for front outlet manifold sub - bases Size A B C D E F G H L M N UNI 5931 UNI 5588 S P R 1 N D+E 110 48 43 3 8 n D+S 1 3.5 G1/4 G1/8 M5 x 14 M5 5.5 901-N1A/TP P plugged. 009