SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 N 0 / Series 55 FTURS The monostable spool valves have TÜV certified I 650 Functional Safety data and can be used up to SIL 4 ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) an be externally piloted (external air pilot supply) to convert valve to zero minimum operation by flipping a gasket The solenoid valves satisfy all relevant Directives GNRL Differential pressure Flow (Qv at 6 bar) - 0 bar [ bar =00 kpa] 60 l/min (NR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, filtered - 40 to + 60 VMQ (silicone) + PUR (polyurethane) MTRILS IN ONTT WITH FLUID ( ) nsure that the compatibility of the fluids in contact with the materials is verified ody, end covers rass Spool valve internal parts rass, stainless steel, POM ore tube Stainless steel ore and plugnut Stainless steel ore spring Stainless steel Seals & discs NR Top disc P Disc holder POM artridge (low power) Welded, packless ISI 40 Seat rass Seat insert POM Shading coil opper Rider rings (low power) PTF (NF/WSNF solenoids only) P RP - MP LP UP Not available 0,5W - W Not available 0,5W -,W Ultra Low power Low power Reduced and Medium power asic power POWR LVLS - cold electrical holding values (watt) SPIFITIONS pipe size orifice size flow coefficient kv operating pressure differential (bar) prefix optional solenoids power max. (PS) level NM TX / Ix min. () basic catalogue number IP65 air ( ) 7 & x d x e mb x mb x ia - ( ) (mm) (m /h) (l/min) ~ = ~/= F LPKF NF M PV (WS)LI - S Solenoid air pilot operated - spring return (monostable) /4 6 0,75,5 0 / 0 0 P - - - - 55407 () /4 6 0,75,5 0 / 0 0 P - - - - - - - 55G407 () /4 6 0,75,5 0 / 0 0 LP - m m - 5507 () /4 6 0,75,5 0 / 0 0 LP m - - - - - - - 55G07 () Solenoid air pilot operated and return (bistable) /4 6 0,75,5 0 / 0 0 P - - - - 5540 /4 6 0,75,5 0 / 0 0 P - - - - - - - 55G40 /4 6 0,75,5 0 / 0 0 LP - m m - 550 /4 6 0,75,5 0 / 0 0 LP m - - - - - - - 55G0 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in D only. () ertified I 650 Functional Safety data, use suffix "SL". () Zero minimum is only achieved if external pressure is applied. ll leaflets are available on: www.asconumatics.eu PI-4-4-G 005G-0/R0
SRIS 55 PRFIX TL prefix power level description 4 5 6 7 LP RP MP P F xplosionproof - NM 7, - Zinc plated steel conduit m - - V xplosionproof - NM 7, - 6 SS conduit m - - M Waterproof IP67 - Metal enclosure (N/I 6007-7+, 64-)* - - T Threaded conduit/hole (M0 x,5) - - L P K F Flameproof - luminium (N/I 6007-, 6007-)* - - - N F Flameproof - luminium (N/I 6007-, 6007-)* - - P V ncapsulated epoxy moulded (N/I 6007-, 64-)* m - - S Solenoid with spade plug connector (N/I 6070) - - W P Waterproof IP67 - Metal enclosure - - L I I.S. with luminium IP67 enclosure (N/I 6007- / 6007-)* m - - - W S Waterproof IP67-6 SS enclosure - - W S L P K F Flameproof - 6 SS (N/I 6007-, 6007-)* - - - W S M Waterproof IP67-6 SS enclosure (N/I 6007-7+, 64-)* - - W S L I I.S. with 6L SS IP67 enclosure (N/I 6007-, 6007-)* m - - - W S N F Flameproof - 6 SS (N/I 6007-, 6007-)* - - T Threaded conduit (/" NPT) - - H T lass H - High temperature, +0 ambient temp. - - - X Other special constructions - - SUFFIX TL suffix power level description 4 5 6 7 LP RP MP P M O Push type manual operator / - - S L ertified I 650 Functional Safety data () / - - PRODUT SLTION GUID STP Select the fluid temperature range and seal material from the general table on page. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications table above. xample : G55407 STP Select prefix (combination). Select the appropriate operator from the specifications table on page and the prefix table on page. Select for this operator in the electrical characteristics table on page : the power level (LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. xample : M STP Select suffix (combination) if required. xample : MO STP 4 Select voltage. Refer to standard voltages on page. xample : 0V / 50Hz OPTIONS & SSORIS series 55 pipe size exhaust protector (stainless steel) G / 46004 () NPT / 46004 () G /4 46004 () NPT /4 46004 () M5 460044 () vailable feature m vailable feature in D only - Not available * TX solenoids are also approved according to N 46- (non electrical valves) () Provided with "SL" suffix () Not to use with MO suffix STP 5 Final catalogue / ordering number. xample : M G55407MO 0 V / 50 Hz ORDRING XMPLS: S G 55 407 0V / 50 Hz S G 55 407 SL 0V / 50 Hz S G 55 40 MO 0V / 50 Hz SHT 55 40 MO 0V / 50 Hz WSLPKF G 55 07 MO 4V / D LPKF G 55 07 MO 4V / D LPKF G 55 07 MO 0V / 50 Hz LI G 55 07 4V / D WSLI G 55 0 MO 4V / D M 55 407 MO 0V / 50 Hz F G 55 G 407 MS 40V / 60 Hz prefix () pipe thread voltage basic number () suffix () Prefixes F and V should always be used with the letter G in the basic number. ll leaflets are available on: www.asconumatics.eu 4-4- 005G-0/R0
XPLNTION OF TMPRTUR RNGS OF SOLNOID VLVS Valve temperature range Operator ambient temperature range Total temperature range SRIS 55 The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) The operator ambient temperature range is determined by the selected power level and the safety code The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above LTRIL HRTRISTIS oil insulation class F lectrical safety I 5 Standard voltages D (=) 4V - 4V (~) 4V - 4V - 5V - 0V (5) /50Hz; other voltages and 60Hz are available on request power ratings operator electrical ambient replacement coil / kit prefix inrush holding hot/cold temperature enclosure safety code type option range (TS) protection () ~ ~ = ~ = (V) (V) (W) (W) ( ) () (N 605) 0 V/50 Hz 4V/D asic power (P) S 55 0,5 /, -40 to +75 N 6070 IP65 moulded 40045-7 40045-4 0 WP/WS 55 0,5 /, -40 to +75 N 6070 IP67 steel/ss 400405-7 400405-4 04 NF/WSNF 55 0,5 - (-60) (7) -40 to +5/40/60 IIG x d II T6/T5/T4, IID x t IP67 alu./ss 400405-7 - 0 NF/WSNF - - - /, (-60) (7) -40 to +40/60/75 IIG x d II T6/T5/T4, IID x t IP67 alu./ss - 400405-4 0 M/WSM 55 0,5 /, -40 to +40 IIG x e mb II T, IID x td IP67 steel/ss 4000-7 400-4 04 PV 55 0,5 /, -40 to +65 IIG x mb II T(~)/T4(=),IID x md IP67 moulded - (4) - (4) 05 F/V 55 0,5 /, -40 to +54/40 NM type 7 and NM 4X 64-05 74-006 06 Low power (LP) S,5,5,5,7/,7-40 to +60 N 6070 IP65 moulded 4005-07 4005-04 07 WP/WS,5,5,5,7/,7-40 to +60 N 6070 IP67 steel/ss 4006-07 4006-04 0 LPKF/WSLPKF (),4,4,4 0,5/0,5 () -40 to +0/60 IIG x d II+H Gb T4/T6, IID x t Db IP67 alu./ss - (4) - (4) NF/WSNF - -, - /, (-60) (7) -40 to +75/0 IIG x d II T6/T5, IID x t IP67 alu./ss - (4) (5) - (4) 0 M/WSM,5,5,5,7/,7-40 to +40/55 IIG x e mb II T6/T5, IID x td IP67 steel/ss - (4) - (4) 0 PV - - -,7/,7-40 to +65 IIG x mb II T6 / IID x md IP67 moulded - - (4) 0 F/V - - -,7/,7-40 to +60 NM type 7 and NM 4X - - (4) LI () (6) - - - 0,5/0,5-40 to +60 IIG x ia II T6 Ga, IID x t III Db (6) IP67 alu. - - (4) 4 WSLI () (6) - - - 0,5/0,5-40 to +60 IIG x ia II T6 Ga, IID x t III Db (6) IP67 SS - - (4) 4 prefix option safety parameters U I = (D) I I P I L I I (V) (m) (W) (H) (µf) Low power (LP) LI/WSLI 500,5 0 0 () Temperature range can be limited by sealings () Refer to the dimensional drawings on pages: 4 to 7 () LI/WSLI: heck the electrical characteristics in the corresponding catalogue pages (4) Multiple coil kits are available under TX/Ix, contact us (5) (WS)NF:Low Power, 0 V does not exist. Maximum voltage in is 5 V (6) LI/WSLI: Low Power, 4 V D only (LI: For use in zone 0 locations, see the installation conditions given in the I&M instructions) (7) The certified minimum temperature of this operator () LPKF/WSLPKF: 4 V D, max. ambient temp. +0, contact us (4 V D =, W) - Not available LTRIL ONNTIONS prefix connection S Spade plug connector with cable gland N750-0 (ISO 4400) for cables with an outer diameter from 6 to 0 mm WP, WS, M, WSM M0 cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor NF, WSNF, LPKF, WSLPKF /" NPT threaded cable entry. nclosures are supplied without cable gland PV Moulded-in cable, standard length m LI, WSLI /" NPT cable gland for cables with an outer diameter from 7 to mm. With an internal and external facility for an earthing or bonding conductor F, V /" NPT conduits, standard length 5 cm DDITIONL OPTIONS Valves configured for external pilot air supply, TPL 0547 Other pipe threads are available on request x mb/md (prefix "PV") solenoid can be supplied with various cable lengths ompliance with "UL", "S" and other local approvals available on request /" NPT (prefix "T") and M0 x.5 (prefix "T") conduits (aluminium or 6 SS) available for steel solenoid housing INSTLLTION Multi language installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation Do not connect the pressure supply to the exhaust port. The environmentally-protected construction is not adapted for a distributing function or use in NO function. ontact us for functions available in specific versions I 650 Functional Safety (suffix SL), allowable temperature range: -40 to +60. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: = NPT (NSI.0.); G = G (ISO /) Prefix "NF/WSNF" enclosure is provided with a /" NPT threaded entry hole, M0 x,5 (prefix "T") is optional. oth are supplied without cable gland ll leaflets are available on: www.asconumatics.eu 4-4- 005G-0/R0
SRIS 55 DIMNSIONS (mm), WIGHT (kg) ll types 4,5 / 6,5 x /4 7,5 = = = = 45 = =,5, 0,5 7 mounting holes 5. mm dia.; Spotfacing: mm dia., depth 5 mm TYP 0: S poxy moulded I 5 / ISO 440 TYP 0: NF / WSNF luminium; epoxy coated / ISI 6 SS N/I 6007- and N/I 6007-55407 / 5540 55407 / 5540 6 / 60 0 60 / NPT D 4 54 0 56 TYP 04: WP / WS M / WSM Steel; epoxy coated / ISI 6 SS I 5 / N 6007-7/ and N 64-55407 / 5540 / 4 60 0 ll leaflets are available on: www.asconumatics.eu 4-4-4 005G-0/R0
SRIS 55 DIMNSIONS (mm), WIGHT (kg) TYP 05: PV poxy encapsulated N/I 6007- and N/I 64- TYP 06: F and V: NM type 7 and poxy encapsulated IS-6 NSI NOT: applicable to solenoid only 55407 / 5540 / 55G407 / 55G40 / "T" (M0x,5) "T" (/ NPT) 60 60 D 46 D 5 TYP 07: S poxy moulded I 5 / ISO 4400 TYP 0: NF / WSNF luminium; epoxy coated / ISI 6 SS N/I 6007- and N/I 6007-5507 / 550 / NPT 5507 / 550 60 0 60 / NPT D 4 54 0 56 TYP 0: WP / WS M / WSM Steel; epoxy coated / ISI 6 SS I 5 / N 6007-7/ and N 64- TYP 0: PV poxy encapsulated N/I 6007- and N/I 64-5507 / 550 / NPT 5507 / 550 / NPT 4 60 60 0 D 46 ll leaflets are available on: www.asconumatics.eu 4-4-5 005G-0/R0
SRIS 55 DIMNSIONS (mm), WIGHT (kg) TYP : Prefixes F/V: IS-6 NSI / NM F and V: NM type 7 and poxy encapsulated IS-6 NSI NOT: applicable to solenoid only 55G07 / 55G0 / "T" (M0x,5) "T" (/ NPT) 60 D 5 TYP : LPKF / WSLPKF luminium, cataphorese black painting / ISI 6L SS N/I 6007- and N/I 6007- TYP 4: LI / WSLI luminium, cataphorese black painting / ISI 6L SS N/I 6007- and N/I 6007-5507 / 0 / 07MO / 0MO 5507 / 0 / 07MO / 0MO M5 M5 /NPT 0 / NPT 60 60 5 6 0 5 6 0 ll leaflets are available on: www.asconumatics.eu 4-4-6 005G-0/R0
SRIS 55 DIMNSIONS (mm), WIGHT (kg) type prefix option power level D weight () monostable bistable 0 S basic power 70 0,7,5 6,5 0,76,4 0 NF basic power 5 4 4, - -,5,5 0 WSNF basic power 5 4 4, - -,5 4, 04 WP / WS / M / WSM basic power 4 04 0 - -,6, 05 PV basic power 7,5 67,5 0,,45 06 F / V basic power,5 7 5,5,5 74,5 0,64, 07 S low power,5 7 0,5,5 7,5 0,7,55 0 NF low power 5 4 4, - -,5,5 0 WSNF low power 5 4 4, - -,5 4, 0 WP / WS / M / WSM low power 4 04 0, - -,05,70 0 PV low power 7 00,5,5 67,5,0,67 F/V low power,5 7 00,5,5 74,5 0,5,50 LPKF low power 4 - - 0,0,6 WSLPKF low power 4 - -,5, 4 LI low power 4 - - 0,,6 4 WSLI low power 4 - -,5, () Incl. coil(s) and connector(s) x d certified cable gland (on request) Three-core cable, length m 4 able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 0 increments (cable ø 6-0 mm) Push type or screw type manual operator, suffix MO xternal pilot air supply, / pipe size 0 able gland for unarmoured cable with 7 to mm dia. sheath onnectable pilot exhaust port Non-connectable pilot exhaust port SSORIS ø4 / NPT ø4 /4 NPT 0 Ø / NPT pilot exhaust protector part number 76405-00 pilot top exhaust low power (SO solenoid interface) Ø M5 / /4 4,5 0 exhaust protector (stainless steel) ll leaflets are available on: www.asconumatics.eu 005G-0/R0 4-4-7
SRIS 55 ll leaflets are available on: www.asconumatics.eu 4-4- PI-04-004-G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 005G-0/R0