VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. Fluid Operating pressure: pilot-assisted minimum pilot pressure / Flow rate at 6 DP 0.5 Flow rate at 6 DP Installation Assembly recoended lubricant Solenoid pilot maximum coil nut torque Compatibility with oils Nm ISO ISO 2 ISO 3 Filtered air without lubrication; lubrication, if used, must be continuous pneumatic / to 0 solenoid/pneumatic pneumatic / to 0 solenoid/pneumatic -0 to +60 7.5 2 5 250 657.4 97.43 0.36 0.25 0.43 700 800 3200 00 2700 4600 In any position (vertical assembly is not recoended for bistable valves subjected to vibration) On single and manifold bases according to ISO 5599/ ISO and UNI FD 22 to CNOmO/in-line pilot / m2 to CNOmO Bistable on solenoid pilot monostable on valve body Please refer to page 6-7 of the tecnical documentation COMPONENTS a VALVE BODy: Aluminium b END CAP: HOSTAFOrm c SPOOL: chemically nickel-plated aluminium d DISTANCE PLATES: plastic e GASKETS: NBr f PISTONS: HOSTAFOrm g PISTON GASKET: NBr h FILTEr: sintered bronze i SPrINGS: special steel j OPErATOr: Brass pipe Stainless steel core 2-07
FLOW CHART ISO Flow rates () ISO 2 Flow rates () Pressure () Pressure () ISO 3 Flow rates () Pressure () KEY TO CODES IPV ISV I P V 5 5 P N S O O FAMILY DIMENSIONS FUNCTION OPERATORS 4 RESETTING (2) FURTHER DETAILS ISO pneumatic 5 ISO 5 5/2 PN pneumatic S mechanical springs OO 5/2 ISO solenoid/pneumatic 6 ISO 2 6 5/3 SO solenoid/pneumatic B bistable CC closed centres 7 ISO 3 SE electric pilot-assisted D differential OC open centres DO solenoid/pneumatic in line PC pressure centres DE solenoid assisted in line m2 CO m2 solenoid/pneumatic CE m2 solenoid assisted Only for ISO Only for ISO and ISO 2 2-08
VALVES ISO 5599/, PNEUMATIC SERIES IPV Operating pressure minimum operation pressure: / Flow rate at 6 P 0.5 Flow rate at 6 P response times at 6 Bar: repositioning response times at 6 Bar: ISO ISO 2 ISO 3-0 to +60 7.5 2 5 250 657.4 97.43 0.36 0.25 0.43 700 800 3200 00 2700 4600 2 24 35 20 30 45 30 43 55 20 30 45 monostable on valve body PNEUMATIC ACTUATION ISO 705000 IPV 55 PNS OO 30 7050200 IPV 55 PNB OO 30 7050300 IPV 55 PND OO 30 7050200 IPV 55 PNS CC 30 70502200 IPV 55 PNS OC 30 70502300 IPV 55 PNS PC 30 PNEUMATIC ACTUATION ISO 2 7052000 IPV 65 PNS OO 705 70520200 IPV 65 PNB OO 705 70520300 IPV 65 PND OO 705 70520200 IPV 65 PNS CC 705 705202200 IPV 65 PNS OC 705 705202300 IPV 65 PNS PC 705 PNEUMATIC ACTUATION ISO 3 7056000 IPV 75 PNS OO 75 70560200 IPV 75 PNB OO 75 70560300 IPV 75 PND OO 75 70560200 IPV 75 PNS CC 290 705602200 IPV 75 PNS OC 290 705602300 IPV 75 PNS PC 290 2-09
VALVES ISO 5599/, SOLENOID/PNEUMATIC, SERIES ISV Operating pressure: pilot-assisted minimum pilot pressure / Flow rate at 6 DP 0.5 Flow rate at 6 DP TrA / Trr monostable at 6 TrA / Trr bistable at 6 Solenoid pilot Coils maximum coil nut torque Nm ISO ISO 2 ISO 3 to 0 to 0-0 to +60 7.5 2 5 250 657.4 97.43 0.36 0.25 0.43 700 800 3200 00 2700 4600 24 / 50 39 / 60 50 / 20 20 / 20 25 / 25 35 / 35 Standards CNOmO Bistable on solenoid pilot monostable on valve body 30 side DIN 43650 Form A ISO 22 side MONOSTABLE 5/2 ISO 7050200 ISV 55 SOS OO 344 70502400 ISV 55 SES OO 344 MONOSTABLE 5/2 ISO 2 70520200 ISV 65 SOS OO 75 705202400 ISV 65 SES OO 75 MONOSTABLE 5/2 ISO 3 70560200 ISV 75 SOS OO 207 705602400 ISV 75 SES OO 207 2-0
BISTABLE 5/2 ISO - MONOSTABLE 5/3 ISO 70502200 ISV 55 SOB OO 388 70502300 ISV 55 SOD OO 375 70502200 ISV 56 SOS CC 372 705022200 ISV 56 SOS OC 372 705022300 ISV 56 SOS PC 372 70502500 ISV 55 SEB OO 388 70502600 ISV 55 SED OO 375 705022400 ISV 56 SES CC 372 705022500 ISV 56 SES OC 372 705022600 ISV 56 SES PC 372 BISTABLE 5/2 ISO 2 - MONOSTABLE 5/3 ISO 2 705202200 ISV 65 SOB OO 740 705202300 ISV 65 SOD OO 70 705202200 ISV 66 SOS CC 720 7052022200 ISV 66 SOS OC 720 7052022300 ISV 66 SOS PC 720 705202500 ISV 65 SEB OO 740 705202600 ISV 65 SED OO 70 7052022400 ISV 66 SES CC 720 7052022500 ISV 66 SES OC 720 7052022600 ISV 66 SES PC 720 BISTABLE 5/2 ISO 3 - MONOSTABLE 5/3 ISO 3 705602200 ISV 75 SOB OO 230 705602300 ISV 75 SOD OO 230 705602200 ISV 76 SOS CC 355 7056022200 ISV 76 SOS OC 355 7056022300 ISV 76 SOS PC 355 705602500 ISV 75 SEB OO 230 705602600 ISV 75 SED OO 230 7056022400 ISV 76 SES CC 355 7056022500 ISV 76 SES OC 355 7056022600 ISV 76 SES PC 355 2-
VALVES ISO 5599/, PNEUMATIC, SERIES ISV WITH IN-LINE SOLENOID PILOT Operating pressure: pilot-assisted minimum pilot pressure / Flow rate at 6 DP 0.5 Flow rate at 6 DP TrA / Trr monostable at 6 TrA / Trr bistable at 6 Solenoid pilot Coils maximum coil nut torque Nm ISO to 0 to 0-0 to +60 7.5 250 0.36 700 00 24 / 50 20 / 20 In line pilot Bistable on solenoid pilot 30 side DIN 43650 Form A ISO 22 side MONOSTABLE 5/2 ISO 70530200 ISV 55 DOS OO 396 705302400 ISV 55 DES OO 396 BISTABLE 5/2 ISO 705302200 ISV 55 DOB OO 450 705302500 ISV 55 DEB OO 450 MONOSTABLE 5/3 ISO 705302200 ISV 56 DOS CC 57 7053022200 ISV 56 DOS OC 56 7053022300 ISV 56 DOS PC 56 7053022400 ISV 56 DES CC 57 7053022500 ISV 56 DES OC 56 7053022600 ISV 56 DES PC 55 2-2
COILS AND CONNECTORS FOR ISO 5599/ SOLENOID VALVES SERIES ISV COILS SIDE 22 Voltage tolerance: 0% to + 5% Insulation class: F55 Degree of protection: IP65 EN60529 with connector Avoid prolonged exposure to the atmospheric agents Coil temperature 00% ED: 70 C at 20 C Ambient temperature According to Atex 94/9 CE rule, group 2, category 3 GD COILS SIDE 30 CONNECTOR FOR COILS SIDE 22 Code Abbrev. Nominal voltage Absorption Inrush Holding W0250005 Coil 22 Ø 8 BA 2W-2VDC 2Vcc 2W 2W W0250000 Coil 22 Ø 8 BA 2W-24VDC 24Vcc 2W 2W W025000 Coil 22 Ø 8 BA 3.5VA-24VAC 24V 50/60Hz 5.3VA 3.5VA W0250002 Coil 22 Ø 8 BA 3.5VA-0VAC 0V 50/60Hz 5.3VA 3.5VA W0250003 Coil 22 Ø 8 BA 3.5VA-220VAC 220V 50/60Hz 5.3VA 3.5VA Electric contact DIN43650 shape A ISO 4400 Voltage tolerance: -0% + 0% Insulation class: F55 Degree of protection: IP65 EN60529 with connector Avoid prolonged exposure to the atmospheric agents According to Atex 94/9 CE rule, group 2, category 3 GD Code Abbrev. Nominal voltage Absorption Inrush Holding W0200000 Coil 30 Ø 8 4W-24VDC 24Vcc 5W 4W W020000 Coil 30 Ø 8 4VA-24VAC 24V 50/60Hz 0VA 4VA W0200200 Coil 30 Ø 8 4VA-0VAC 0V 50/60Hz 0VA 4VA W0200300 Coil 30 Ø 8 4VA-220VAC 220V 50/60Hz 0VA 4VA Code Type Colour Ø Cable W0970500 Standard Black PG9 W09705002 LED 24V Transparent PG9 W09705003 LED 0V Transparent PG9 W09705004 LED 220V Transparent PG9 W09705005 LED + VDr 24V Transparent PG9 W09705006 LED + VDr 0V Transparent PG9 W09705007 LED + VDr 220V Transparent PG9 W097050070 Atex II 3 GD Black PG9 CONNECTOR FOR COILS SIDE 30 Code Type Colour Ø Cable W0970520033 Standard Black PG9 W0970520034 LED 24V Transparent PG9 W0970520035 LED 0V Transparent PG9 W0970520036 LED 220V Transparent PG9 W0970520037 LED + VDr 24V Transparent PG9 W0970520038 LED + VDr 0V Transparent PG9 W0970520039 LED + VDr 220V Transparent PG9 KIT COIL EEXM KIT COILS SIDE 22 IP65 Code Description 022760693 Kit for coil 30 24 VDC EEXmT5 cable 3 m 022760695 Kit for coil 30 24 VDC EEXmT5 cable 5 m 022760803 Kit for coil 30 24 VAC EEXmT5 cable 3 m 022760805 Kit for coil 30 24 VAC EEXmT5 cable 5 m 0227608023 Kit for coil 30 0 VAC EEXmT5 cable 3 m 0227608025 Kit for coil 30 0 VAC EEXmT5 cable 5 m 0227608033 Kit for coil 30 230 VAC EEXmT5 cable 3 m 0227608035 Kit for coil 30 230 VAC EEXmT5 cable 5 m According to Atex 94/9 CE rule, group II, category 2 GD Code Description 02220000 Kit for coil 22 - IP65 Improved IP65 protection, even after prolonged exposure to atmospheric agents. Applicable to valves with a technopolymer control. 2-3