SOLENOI VLVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / / NC 5/ 0 /-5/ Series 55 FETURES The monostable spool valves, series 55, have TÜV certifi ed IEC 650 Functional Safety data and can be used up to SIL /K 7 The solenoid operated spool valves have threaded port connections and "NMUR" interface The same spool valve can be adapted for / NC or 5/ functions for controlling double-acting and single-acting actuators ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) Can be externally piloted (external air pilot supply) to convert valve to zero minimum operation by fl ipping a gasket The solenoid valves satisfy all relevant EC irectives GENERL ifferential pressure - 0 bar [ bar =00 kpa] Flow (Qv at 6 bar) 700 l/min (NR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, fi ltered - 0 C to + 60 C VMQ (silicone) + PUR (polyurethane) MTERILS IN CONTCT WITH FLUI ( ) Ensure that the compatibility of the fluids in contact with the materials is verified ody, end covers Stainless steel, ISI 6L Interface plates Glass-fi lled P Spool valve internal parts Stainless steel, POM Core tube Stainless steel Core and plugnut Stainless steel Core spring Stainless steel Seals & discs NR Top disc FPM isc holder POM Cartridge (Low ) Welded, packless ISI 0 Seat Stainless steel Seat insert POM Shading coil Copper Rider ring (Low ) PTFE UP LP Not vailable 0,W -,W RP-MP P Not vailable 0,5W -,W Ultra Low Low Reduced and Medium asic POWER LEVELS - cold electrical holding values (watt) SPECIFICTIONS pipe orifice flow coefficient kv operating pressure differential (bar) prefix optional solenoids max. (PS) level NEM TEX/CENELEC (gas/dust) min. () basic catalogue number IP65 air ( ) 7 & EEx d EEx em EEx m EEx i EEx n ( ) (mm) (m /h) (l/min) ~ = ~/= EF NF NK EM PV IS ZN SC Solenoid air pilot operated - spring return (monostable) / 6 0,60 0 0 / 0 0 P - - 550 / 6 0,60 0 0 / 0 0 P - - - - - - - 55G0 / 6 0,60 0 0 / 0 0 LP - - 550 / 6 0,60 0 0 / 0 0 LP - - - - - - - 55G0 Solenoid air pilot operated and return (bistable) / 6 0,60 0 0 / 0 0 P - - 550 / 6 0,60 0 0 / 0 0 P - - - - - - - 55G0 / 6 0,60 0 0 / 0 0 LP - - 550 / 6 0,60 0 0 / 0 0 LP - - - - - - - 55G0 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in C only Certifi ed IEC 650 Functional Safety data, use suffi x "SL" () Zero minimum is only achieved if external pressure is applied 007/R0 第 /0 页 PIC-6-5-G
SERIES 55 PREFIX TLE prefi x level description 5 6 7 LP RP MP P S C U ustproof TEX (EN 50--) * - - - E F Explosionproof - NEM,, 6, 7, - - E V Explosionproof - NEM,, 6, 7, - 6 SS - - E M Encapsulated TEX (EN 500 & EN 500) * - - E T Threaded conduit/hole (M0 x.5) - - I S S C Intrinsically safe with SC coil TEX (EN 5000) * - - - N F Flameproof - lum. TEX (EN 500) * - - N L Flameproof - Cast Iron TEX (EN 500) * - - N K Flameproof - lum. TEX (EN 500) * - - - P V Encapsulated TEX (EN 500) * - - S C Solenoid with spade plug connector (EN 6070) - - W P Waterproof IP67 - Metal enclosure (EN 6070) - - W S Waterproof IP67-6 SS enclosure (EN 6070) - - W S E M 6 SS "EM" enclosure TEX (EN 500 & EN 5000) * - - W P U ustproof TEX (EN 50--) - Metal enclosure * - - - W S U ustproof TEX (EN 50--) - 6 SS enclosure * - - - W P I S I.S. with Metal IP67 enclosure TEX (EN 5000) * - - - W S I S I.S. with Metal IP67-6 SS enclosure TEX (EN 5000) * - - - W S N F Flameproof - 6 SS TEX (EN 500) * - - Z N Encapsulated Non Sparking TEX (EN 500) * - - T Threaded conduit (/" NPT) - - H T Class H - High temperature, +0 C ambient temp. - - - X Other special constructions - - SUFFIX TLE suffi x level description 5 6 7 LP RP MP P M O Push type or screw type manual operator / - - S L Certifi ed IEC 650 Functional Safety data () / - - PROUCT SELECTION GUIE STEP Select basic catalogue number, including pipe thread identifi cation letter. Refer to the specifi cations table on page. Example: G550 STEP Select prefi x (combination). Refer to the specifi cations table on page and the prefi x table on page, respect the indicated level. Example: EM STEP Select suffi x if required. Refer to the suffi x table, respect the indicated level. Example: MO STEP Select voltage. Refer to standard voltages on page. Example: 0V / 50Hz STEP 5 Final catalogue / ordering number. Example: EM G550MO 0 V / 50 Hz OPTIONS & CCESSORIES series 55 pipe exhaust protector (stainless steel) G / 600 NPT / 600 G / 600 NPT / 600 vailable feature vailable feature in C only - Not available * TEX solenoids are also approved to EN 50-- (dust) and EN 6- (non electrical valves) Provided with "SL" suffi x () Not to use with MO suffi x ORERING EXMPLES: SC G 55 0 0V / 50 Hz SC G 55 0 SL 0V / 50 Hz SC G 55 0 MO 0V / 50 Hz SCHT 55 0 MO 0V / 50 Hz ISSC G 55 0 MO V / C SC 55 0 0V / 50 Hz WPIS G 55 0 V / C EM 55 0 MO 0V / 50 Hz EF G 55 G 0 MO 0V / 60 Hz prefi x () pipe thread voltage basic number () suffi x () Prefi x EF should always be used with the letter G in the basic number. 6-5- 第 /0 页 007/R0
ELECTRICL CHRCTERISTICS Coil insulation class F Connector Spade plug (cable Ø 6-0 mm) Connector specification ISO 00 Electrical safety IEC 5 Standard voltages C (=) V - V C (~) V - V - 5V - 0V/50Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil prefix inrush holding hot/cold temperature enclosure safety code option ranges (TS) protection type ~ ~ = ~ = (V) (V) (W) (W) (C ) (EN 605) 0 V/50 Hz V C asic (P) SC 55 0,5 /, -0 to +75 EN 6070 moulded IP65 005-7 005-0 SCU 55 0,5 /, -0 to +75 II IP65 T 00 C(~)/5 C(=) moulded IP65 - () - () 0 WP 55 0,5 /, -0 to +75 EN 6070 steel IP67 0005-7 0005-0 WPU 55 0,5 /, -0 to +75 II IP67 T 00 C steel IP67 - () - () 0 WS 55 0,5 /, -0 to +75 EN 6070 st. steel IP67 0005-7 0005-0 WSU 55 0,5 /, -0 to +75 II IP67 T 00 C st. steel IP67 - () - () 0 (WS)NF/NL 55 0,5 - -60 to +5/0/60 II G/ EEx d IIC T6/T5/T alu/steel IP67 0005-7 - 0 (WS)NF/NL - - - /, -60 to +0/60/75 II G/ EEx d IIC T6/T5/T alu/steel IP67-0005- 0 NK 55 0,5 /, -0 to +50/60 II G/ EEx d II+H T(~/=) aluminium IP65 0005-7 0005-0 EM 55 0,5 /, -0 to +0 II G/ EEx em II T steel IP67 000-7 00-0 WSEM 55 0,5 /, -0 to +0 II G/ EEx em II T st. steel IP67 000-7 00-0 PV 55 0,5 /, -0 to +65 II G/ EEx m II T(~)T(=) moulded IP65 - () - () 05 EF 55 0,5 /, -0 to +5/0 NEM Types 7 and NEM X 60-05 70-006 06 EV 55 0,5 /, -0 to +5/0 NEM Types 7 and -6 SS NEM X 60-05 70-006 06 ZN 55 0,5 /, -0 to +50 II G/ EEx n II T moulded IP65 - () - () 0 Low (LP) SC,5,5,5,7/,7-0 to +60 EN 6070 moulded IP65 - () - () 07 WP,5,5,5,7/,7-0 to +60 EN 6070 steel IP67 - () - () 0 WS,5,5,5,7/,7-0 to +60 EN 6070 st. steel IP67 - () - () 0 NF - -, -/, -0 to +75 II G/ EEx d IIC T6 aluminium IP67 - - () 0 NL - -, -/, -0 to +75 II G/ EEx d IIC T6 cast iron IP67 - - () 0 WSNF - -, -/, -0 to +75 II G/ EEx d IIC T6 st. steel IP67 - - () 0 EM,5,5,5,7/,7-0 to +0/55 II G/ EEx em II T6/T5 steel IP67 - () - () 0 WSEM,5,5,5,7/,7-0 to +0/55 II G/ EEx em II T6/T5 st. steel IP67 - () - () 0 PV - - -,7/,7-0 to +60 II G/ EEx m II T6 moulded IP65 - - () 0 EF - - -,7/,7-0 to +0 NEM Types 7 and NEM X - - () EV - - -,7/,7-0 to +0 NEM Types 7 and -6 SS NEM X - - () ISSC () - - - 0,/0, -0 to +60 II G/ EEx ia IIC T6 moulded IP65-676-00 WPIS () - - - 0,/0, -0 to +60 II G/ EEx ia IIC T6 steel IP67-600-00 0 WSIS () - - - 0,/0, -0 to +60 II G/ EEx ia IIC T6 st. steel IP67-600-00 0 ZN - - -,7/,7-0 to +50 II G/ EEx n II T moulded IP65 - - () 07 - Not available Refer to the dimensional drawings on pages to 6. () Intrinsically safe pilots: Check the electrical characteristics in the corresponding catalogue pages (ISSC/WPIS/WSIS operators). () Multiple coil kits available under TEX, contact us safety parameters prefix U I I I P I L I C I option = (C) (V) (m) (W) (µf) (mf) Low (LP) ISSC 00,5 0 0 WPIS/WSIS 00,5 0 0 ITIONL OPTIONS Valves confi gured for external pilot air supply, TPL 057 Other pipe threads are available on request EEx m (prefi x "PV") execution can be supplied in various cable lengths Compliance with "UL", "CS" and other local approvals available on request /" NPT (prefi x "T") and M0 x.5 (prefi x "ET") conduits (aluminium or 6 SS) available for steel solenoid housing INSTLLTION Installation/maintenance instructions are included with each valve The solenoid valves can be mounted in any position without affecting operation IEC 650 Functional Safety (Suffi x SL), allowable temperature range: -0 C to +60 C. Probability of failure on demand, contact us Spool valve supplied with two interface plates with NMUR mating surfaces. epending on function (NC / or 5/), position one of the two plates on the spool valve body before installing on actuator It is necessary to connect pipes or fi ttings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) owel pin (if necessary), bolts and gaskets are standard supplied Threaded pipe connection identifi er is: = NPT (NSI.0.); G = G (ISO /) EEx d (prefi x "NF") enclosure is provided with a /" NPT threaded entry hole [optionally, M0 x,5 (prefi x "ET")] and is supplied without cable gland EEx d (prefi x "NK") enclosure is provided with a /" NPT threaded entry hole [optionally, /" NPT (prefix "T") or M0 x,5 (prefix "ET")] and is supplied without cable gland EEx em (prefi x "EM") execution: solenoid enclosure has a cable gland with integral strain relief for cables with an o.d. from 7 to mm and is provided with an internal and external connection facility for an earthing or bonding conductor Valves with suffi x "SL" are provided with a specifi c exhaust protector 第 /0 页 SERIES 55 6-5- 007/R0
SERIES 55 IMENSIONS (mm), WEIGHT (kg) Monostable istable 5 C C 5 C C 5 5 Interface plates mounting holes 5. mm dia.; C C,5 C C 7 Spotfacing: mm dia., depth 5 mm; screws (CHc M5 x 5), engaged length: 7 mm 0 / 5 x / 5,6 0 / 5 x / 5,6 C One 5 mm dia. hole for dowel pin - in position C: / NC function plate - in position C: 5/ function plate O-ring seals (supplied) TYPE 0 Prefi x "SC", "ZN" and "SCU" Solenoid asic Epoxy moulded IEC 5 / ISO 00 (SC/SCU) EN 500 (ZN) IP65 / II IP65 T 00 C to 00 C / II G/ EEx n II 550 / 550 TYPE 0 Prefi x "NF", "NL" and "WSNF" Solenoid asic luminium, steel; epoxy coated (NF and NL) ISI 6 SS (WSNF) EN 500 and EN 50-- IP67 / II G/ EEx d IIC 550 / 550 6 / 0 0 / NPT 7,5 7 5 5 5 0 56 550 / 550 TYPE 0 Prefi x "NK" Solenoid asic luminium; epoxy coated EN 500 and EN 50-- IP65 / II G/ EEx d II + H TYPE 0 Prefi x "WP", "WS" / "WPU", "WSU" / "EM", "WSEM" Solenoid asic Steel; epoxy coated (WP, WPU and EM) ISI 6 SS (WS, WSU and WSEM) IEC 5 / EN 500 & EN 500 EN 50-- IP67 / II IP65 T 5 C to 00 C / II G/ EEx em II 550 / 550 / / / NPT 0 0 5 5,5 6,5 00 56 05 0 6-5- 第 /0 页 007/R0
SERIES 55 IMENSIONS (mm), WEIGHT (kg) TYPE 05 Prefi x "PV" Solenoid asic Epoxy encapsulated EN 500 and EN 50-- II G/ EEx m II IP65 550 / 550 / TYPE 06 Prefi x "EF" and "EV" Solenoid asic Epoxy encapsulated ICS-6 NSI / NEM Types 7 and Note: applicable to solenoid only 55G0 / 55G0 / "ET" (M0x,5) "T" (/ NPT) 0,5 7,5 6 6 7,5 5 75 TYPE 07 Prefi x "SC" / "ZN" Solenoid Low Epoxy moulded IEC 5 / ISO 00 (SC) EN 500 (ZN) IP65 / II G/ EEx n II 550 / 550 / NPT TYPE 0 Prefi x "NF", "NL" and "WSNF" Solenoid Low luminium, steel; epoxy coated (NF and NL) ISI 6 SS (WSNF) EN 500 and EN 50-- IP67 / II G/ EEx d IIC 550 / 550 0 07 / NPT 7,5 5,5 5 5 0 56 TYPE 0 Prefi x "WP", "WS" / "EM", "WSEM" Solenoid Prefi x "WPIS" / "WSIS" Solenoid Low Metal; epoxy coated / ISI 6 SS IEC 5 / EN 500 & EN 500 / EN 5000 EN 50-- IP67 / II G/ EEx em II / II G/ EEx ia IIC 550 / 550 / NPT TYPE 0 Prefi x "PV" Solenoid Low Epoxy encapsulated EN 500 and EN 50-- II G/ EEx m II IP65 550 / 550 / NPT 0 06 05 0 7,5 6 6 第 5/0 页 6-5-5 007/R0
SERIES 55 IMENSIONS (mm), WEIGHT (kg) TYPE Prefi x "EF" and "EV" Solenoid Low Epoxy encapsulated ICS-6 NSI / NEM Types 7 and Note: applicable to solenoid only 55G0 / 55G0 / "ET" (M0x,5) "T" (/ NPT) 550 / 550 TYPE Prefi x "ISSC" Solenoid Low Polypropylene moulded EN 5000 and EN 50-- II G/ EEx ia IIC / NPT 06 0 6 7,5 5 75 7,5 67 0 type prefix option level weight monostable bistable 0 SC / SCU / ZN basic,5,0 0 NF basic,6,0 0 WSNF basic, 7,00 0 NL basic,7 6,60 0 NK basic,0,0 0 WP/WPU/WS/WSU/EM/WSEM basic,7,0 05 PV basic,6,0 06 EF / EV basic,6,0 07 SC / ZN low,5,0 0 NF low,6,0 0 WSNF low, 7,00 0 NL low,7 6,60 0 WP / WS / EM / WSEM / WPIS / WSIS low,7,6 0 PV low,6,0 EF / EV low,6,0 ISSC low,6,50 Incl. coil(s) and connector(s) EEx d certifi ed cable gland (on request) Three-core cable, length m Cable gland for unarmoured cable with 7 to mm dia. sheath 6 Connector rotatable by 0 increments (Ø 6-0 mm) Manual operator location, suffi x MO External pilot air supply, / pipe Connectable pilot exhaust port Non-connectable pilot exhaust port CCESSORIES ø / NPT ø / NPT pilot exhaust protector part number 76-05-00 / NPT pilot top exhaust low (SCO solenoid interface) Ø Ø - / / - 0 exhaust protector (stainless steel) 6-5-6 第 6/0 页 007/R0
SPOOL VLVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / / NC 5/ 0 /-5/ Series 55 FETURES The monostable spool valves, series 55, have TÜV certifi ed IEC 650 Functional Safety data and can be used up to SIL /K 7 The solenoid operated spool valves have threaded port connections and "NMUR" interface The same spool valve can be adapted for / NC or 5/ functions for controlling double-acting and single-acting actuators ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) The solenoid valves satisfy all relevant EC irectives GENERL ifferential pressure - 0 bar [ bar =00 kpa] Flow (Qv at 6 bar) 700 l/min (NR) fluids ( ) temperature range (TS) seal materials ( ) air, inert gas, fi ltered - 0 C to + 60 C VMQ (silicone) + PUR (polyurethane) MTERILS IN CONTCT WITH FLUI ( ) Ensure that the compatibility of the fluids in contact with the materials is verified ir operated CNOMO solenoid (pilot) interface ody, end covers Stainless steel, ISI 6L Stainless steel, ISI 6L Interface plates Glass-fi lled P Glass-fi lled P Spool valve internal parts Stainless steel, POM Stainless steel, POM Seals NR NR Pilot internal parts - Size 0 (E06.05.0N), refer to catalogue pages: 7 pilot (CTNK) and 5 pilot (ISSC) IR OPERTE SPECIFICTIONS pipe orifice flow coefficient kv operating pressure differential (bar) max. (PS) prefix optional basic catalogue number min. air ( ) ( ) (mm) (m /h) (l/min) ~ = Pilot air operated - spring return (monostable) / 6 0,6 0 0 0-550 Pilot air operated and return (bistable) / 6 0,6 0 0 0-550 UP LP Not vailable,6w Ultra Low Low RP-MP P Not available 0,5W -,W Reduced and Medium asic POWER LEVELS - cold electrical holding values (watt) CNOMO SOLENOI (PILOT) INTERFCE SPECIFICTIONS pipe orifice flow coefficient kv operating pressure differential (bar) min. level prefix optional solenoids max. (PS) TEX/CENELEC (gas/dust) air ( ) EEx d EEx i basic catalogue number ( ) (mm) (m /h) (l/min) ~ = ~/= CTNK ISSC Solenoid air pilot operated - spring return (monostable) / 6 0,6 0 0 0 P - 550 / 6 0,6 0 - LP - 550 Solenoid air pilot operated and return (bistable) / 6 0,6 0 0 0 P - 550 / 6 0,6 0 - LP - 550 Select for NPT NSI.0. or select G for ISO G (/) vailable feature vailable feature in C only. Certifi ed IEC 650 Functional Safety data, use suffi x "SL". 第 7/0 页 6-5-7 007/R0
SERIES 55 PREFIX TLE prefi x level description 5 6 7 UP LP RP P C T N K Flameproof, pilot 7, TEX (EN 500) * - - - I S S C Intrinsically safe, pilot 5, TEX (EN 5000) * - - - SUFFIX TLE suffi x level description 5 6 7 UP LP RP P G Non-electrical, G EEx c, construction safety, gas/dust-tex (EN 6-5) - - - - M S Screw type manual operator - - - M O Push type or screw type manual operator - - - S L Certifi ed IEC 650 Functional Safety data - - OPTIONS & CCESSORIES series 55 pipe exhaust protector (stainless steel) G / 600 () NPT / 600 () G / 600 () NPT / 600 () vailable feature vailable feature in C only - Not available * TEX solenoids are also approved to EN 50-- (dust) and EN 6- (non electrical valves) Not to use with MS or MO suffi x () Provided with "SL" suffi x PROUCT SELECTION GUIE STEP Select basic catalogue number, including pipe thread identifi cation letter. Refer to the specifi cations table on page 7. Example: G550 STEP Select prefi x (combination). Refer to the specifi cations table on page 7 and the prefi x table on page, respect the indicated level. ir operated version, does not use prefi x. Example: CTNK STEP Select suffi x (combination) if required. Refer to the suffi x table, respect the indicated level. G suffi x available for air operated version only (do not use manual operator suffi x) Example: MS STEP Select voltage. Refer to standard voltages on page. Example: 0V / 50Hz STEP 5 Final catalogue / ordering number. Example: CTNK G550MS 0 V / 50 Hz ORERING EXMPLES: CTNK G 55 0 0V / 50 Hz CTNK G 55 0 SL V / C CTNK G 55 0 MS 5V / 50 Hz CTNK G 55 0 0V / 50 Hz CTNK G 55 0 MS V / C CTNK 55 0 0V / 50 Hz ISSC G 55 0 V / C ISSC G 55 0 SL V / C ISSC G 55 0 MO V / C ISSC G 55 0 V / C ISSC G 55 0 MO V / C G 55 0 G 55 0 G G 55 0 GSL G 55 0 G 55 0 G prefi x pipe thread basic number voltage suffi x 6-5- 第 /0 页 007/R0
CNOMO SOLENOI (PILOT) INTERFCE ELECTRICL CHRCTERISTICS Coil insulation class F Connector Spade plug (cable Ø 6-0 mm) Connector specification ISO 00 / EN 750-0, form (ISSC prefi x) Connection Cable gland (CTNK prefi x) Electrical safety IEC 5 Standard voltages C (=) CTNK: V - V ISSC: V -0%/+0% C (~) CTNK: V - V - 5V - 0V/50Hz; other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil prefix inrush holding hot/cold temperature enclosure safety code option ranges (TS) protection type ~ ~ = ~ = (V) (V) (W) (W) (C ) (EN 605) - - asic (P) CTNK 55 0,5 /, -0 to +60 II G EEx d II+H T (C/C) moulded IP65 - - 0 Low (LP) ISSC - - -,6-0 to +50 II G EEx ia IIC T6 moulded IP65 - - 0 - Not available Refer to the dimensional drawings on pages 0. safety parameters prefix U I I I P I L I C I option = (C) (V) (m) (W) (µf) (mf) Low (LP) ISSC 5,6 0 0 ITIONL OPTIONS Other pipe threads are available on request SERIES 55 INSTLLTION Installation/maintenance instructions are included with each valve The spool valves can be mounted in any position without affecting operation IEC 650 Functional Safety (suffi x SL), allowable temperature range: -0 C to +60 C. Probability of failure on demand, contact us Spool valve supplied with two interface plates with NMUR mating surfaces. epending on function (/ NC or 5/), position one of the two plates on the spool valve body before installing on actuator owel pin (if necessary), bolts and gaskets are standard supplied It is necessary to connect pipes or fi ttings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic operator if used outside or in harsh environments (dusts, liquids etc.) EEx d (prefi x "CTNK") enclosure is provided with a /" NPT threaded entry hole [optionally, /" NPT (prefi x "T") or M0 x,5 (prefi x "ET")] and is supplied without cable gland Threaded pipe connection identifi er is: = NPT (NSI.0.); G = G (ISO /) Valves with suffi x "SL" are provided with a specifi c exhaust protector 第 /0 页 6-5- 007/R0
SERIES 55 IMENSIONS (mm), WEIGHT (kg) Type 0-0: CNOMO 0 (E06.05.0) Type 0: ir operated 5 C C 5 C C 5 C C 5 C C 5 5 G/ 5 G/ 0 5 C C 67,5,5 C C 67,5 5 C C 66,7 C C 66,7, x / x / x / x / 5 5,6 5 5,6 TYPE 0 Prefi x "CTNK" Solenoid asic 7 pilot luminium, epoxy coated EN 500 and EN 50-- IP65 / II G EEx II+H 550 / 550 550MS / 550MS TYPE 0 Prefi x "ISSC" Solenoid Low 5 pilot Polyamide (cable 6-0 mm) EN 5000 and EN 50-- IP65 / II G EEx ia IIC 550 / 550 550MO / 550MO G/ / NPT 5 5,6 5 5,6 Interface plates mounting holes 5. mm dia.; Spotfacing: mm dia., depth 5 mm; screws (CHc M5 x 5), engaged length: 7 mm C One 5 mm dia. hole for dowel pin - in position C: / NC function plate - in position C: 5/ function plate O-ring seals (supplied) 07 550 / 550 6-5-0 77 TYPE 0 ir operated version No prefi x Use "SL", "G" or "GSL" suffi x IP65 / II G c 5, 5,5 6,5 00 56 5 第 0/0 页 type prefix option level weight monostable bistable 0 CTNK basic,, 0 ISSC low,,5 0 - -,,7 Incl. connector(s), except CFVT. CCESSORIES Ø 7 05 Connector rotatable by 0 increments (cable 6-0 mm) Manual operator location EEx d certifi ed cable gland (on request) Connectable pilot exhaust port Non-connectable pilot exhaust port Ø - / / - 0 exhaust protector (stainless steel) 5 PIC-06-005-G -- vailability, design and specifications are subject to change without notice. ll rights reserved. 007/R0