-800-686-580 FAX: -877-94-467 Nozzles OPW 90 Manual Nozzles High Flow, Bulk Fuel Oil Delivery Service OPW 7H Automatic Shut-Off Nozzles Heavy-Duty, High Flow Truck, Bus and Fleet Service Spout Optional Aluminum body lighterweight, easier to maneuver. Dual poppets easy to open nozzle against high inlet pressures. Four position hold-open feature for use when fueling large capacity tanks. Nozzle must be attended at all times during usage. Right angle design provides larger lever area for better grip and easier control; permits nozzle to fit into awkward spaces close to walls and into corners. Drag lugs protect the nozzle when dragged across rough surfaces; adds to long life with rough usage. Easily replaced spout the spout is simply threaded into the body. Replacement spouts are readily available from Summers Rubber Company. NPT female threads at inlet end standard pipe threads accept all standard, 4, 2 and 2 male connections. Materials: Body: Cast aluminum. Main stem: Stainless steel. Stem seal: Graphite with Teflon. Disc: Viton. Spout: OPW 296 brass or 297 aluminum (optional). Size Part Government (In.) No. Description National Stock No. 4 90-02 4 90-0 2 90-04 2 4 90-05 2 90A-44 with Flexible Brass Spout 4990-00-56-4642 2 90G-B04 with Spout and Ground Wire 4490-0-45-567 2 90GW-55 for Potable Water with Spout 4460-0-88-898 If you operate a full service truckstop, refuel your own fleet, or manage a cardlock refueling location, the low cost, long life and durability of the OPW 7H high flow nozzle can help increase your productivity, sales and profits. Even, smooth spray pattern minimizes diesel foaming and false shutoffs. Extra long anchor spring keeps the OPW 7H secure in most large fill openings. Helps reduce spills a unique two-stage lever design assures a positive shut-off, even if held wide open. Three position hold-open device one finger control of hold-open mechanism means easy setting of flow rate. Easily replaced spout simply remove three screws. Replacement kits are readily available from Summers Rubber Company. Dash-pot action for smoother closing action and reduced line shock. Dual poppets easy to open nozzle against high pressure. Available with FlowLock designed to shut-off automatically when the spout is tipped up, limiting spillage. Listed by Underwriters Laboratories Inc. BSPP threads available by ordering the OPW 7HL. Materials: Body: Aluminum. Lever and lever guard: Durotuff. Packing: Graphite with Teflon. Disc: Viton. Inlet size: NPT. WARNING: Do not use OPW 7H Nozzles with a hold-open device on pre-pay self-service installations. Use of foreign objects to hold open automatic nozzles could result in failure to shut-off and personal injury. Hand Insulator 7H with Color 7H FlowLock Green 7H-000 7H-00 Black 7H-0400 7H-040 Yellow 7H-0900 7H-090 Teflon and Viton are registered trademarks of the Dupont Co. 7H is a registered trademark and FlowLock is a trademark of OPW Fueling Components. Durotuff is a registered trademark of OPW. 88
-800-686-580 FAX: -877-94-467 Hose Reels Hose Reels in All Sizes and Capacities Hannay Reels is the leading manufacturer of high quality hose and cable reels for most every conceivable application. This catalog describes and gives specifications on the most popular hose reels. If you don t find what you re looking for, call Summers Rubber Company and we will help you meet your needs. Reel Selector Chart Hose I.D. Sizes (In.) Reel Type 4 2 Hose Assemblies Spring Reels 4 2 Series LN 4 8 Series N500 (high pressure) 4 4 Dual Series N600/600 (dual hose) 8 & 2 Series N700/700 4 & Series N800/800 4 & 2 Series 900 Compact Manual Reels 4 8 Series 000 Power Reels 4 Series 500, 800, 4000 4 Dual Series 2000, 7000 (dual hose) 2 Series 6000 2 Series 7500 2 2 Series 8000 2 Series 9000 Manual Reels 4 2 Series 000, 500 Storage Reels 4 2 Series C200, C500 Spring Reels Manual Reels Compact Manual Reels Power Reels Storage Reels Model C6-0- The model C6-0- portable cable storage reel is small, lightweight, and durable for quick and easy use especially in fire/rescue, mobile broadcasting, or industrial maintenance and repair applications where long lengths of cable are payed out over large areas. This model is supplied with a spring drag device to brake the reel. Model C20-4-6 Model C20-4-6 is a strong, portable reel for storing higher capacities. Steel construction with direct crank rewind for fast, easy pickup. Model C20-4-6 is supplied with a spring drag device used to brake the reel. An optional pin lock (PL-2) is available at additional cost. Models C6-0- and C20-4-6 feature crank rewind handles permanently attached to the disc. Insert cable in opening in drum and disc to initiate winding. Note: These storage reels have no live connections. Broadcast Cable Extension Cord estry Fire Hose Rope Model C20-4-6 Broadcast Cable Extension Cord Rope Model C6-0- 89
-800-686-580 FAX: -877-94-467 Hose Reels continued Portable Garden Hose Reels To Handle 2 through I.D. Hose GH00 Grounds Maintenance Restaurants Home Use GHAT200 Hannay Hose Reel Models GH00 and GHAT200 are designed for portable use in grounds maintenance by the restaurant, fast food, hotel and other industries. Hannay portable reels get to and from the job fast. Pickup and storage are quick and neat, keeping hose safely out of the way while minimizing wear and tear. Models GH00 and GHAT200 are continuous flow reels with swivel joint inlet, fluid hub and outlet riser. Model GHAT200 comes with pneumatic tires. Direct crank rewind. Model GH00 has a permanently attached crank. Model GHAT200 has a removable crank. Inlet Model GH00 standard inlet is 90 ball bearing swivel joint with 2 female NPT threads. Model GHAT200 standard inlet is 90 ball bearing swivel joint with female NPT threads. Outlet Model GH00 and GHAT200 standard outlet is male GHT threads. Other sizes and/or threads, including female NPT threads, can be furnished and must be specified. When specifying other than GHT threads delete prefix GH from model number. Model GH00 operates at pressures to 000 and temperatures from 20 F to 400 F (-7 C to 204 C). Model GHAT200 operates at pressures to 000 and temperatures from 20 F to 400 F (-7 C to 204 C). Reels to operate at other pressures and temperatures can be furnished at extra cost. Stainless Steel Manual Reels 90 Series SS500 4 through 8 I.D. Hose Series SS800 2 through 4 I.D. Hose Series SS4000 2 through I.D. Hose Hannay s strong, lightweight compact reels designed for long lengths of hose. These compact reels are exceptionally versatile and able to meet your special requirements. Manual A direct crank rewind is permanently attached to the reel axle on Series SS500, SS800, and SS4000. Brakes and Locks Reels with direct crank rewind are supplied with an adjustable spring tension brake and spring actuated pin lock as standard. Inlet Series SS500 standard inlet is 90 ball bearing swivel joint with 2 female NPT threads. Series SS800 and SS4000 standard inlet is 90 ball bearing swivel joint with female NPT threads. Outlet Series SS500 standard outlet is 2 female NPT threads. Series SS800 standard outlet is 4 female NPT threads. Series SS4000 standard outlet is female NPT threads. Other sizes and/or threads can be furnished, must be specified. Optional Rollers Rollers may be purchased as accessory items. Specify roller position when ordering. Mounting brackets are necessary. Series SS500 these reels operate at pressures to 000 and handle product temperatures from 20 F to 400 F (-7 C to 204 C). Series SS800 and SS4000 these reels operate at pressures to 000 and handle product temperatures from 20 F to 400 F (-7 C to 204 C). Reels to operate at other pressures and temperatures can be furnished at extra cost.
-800-686-580 FAX: -877-94-467 Hose Reels continued Stainless Steel Spring Reels To Handle Single 4 through 2 I.D. Hose Series SSLN700 Series SSN700 Series SSN700 and SSLN700 reels offer a narrow frame for compact mounting. The SSLN700 reels are designed for in-plant and processing applications and not for vehicle or mill duty use. A heavy-duty spring motor provides self-contained rewind power. A non sparking ratchet assembly locks the reel when the desired length of hose has been payed out. A pull on the hose unlocks the reel and the spring motor retracts the hose. A declutching arbor is provided to prevent damage from reverse winding. Inlet/Outlet Standard inlet is 90 ball bearing swivel joint with 2 female NPT threads. Standard outlet is 2 female NPT threads. Other sizes and/or threads can be furnished and must be specified. These reels operate at pressures to 000 and handle product temperatures from 20 F to 400 F (-7 C to 204 C). Reels to operate at other pressures and temperatures can be furnished at extra cost. Rollers All models are supplied with a 4-way roller assembly. Roller position must be specified. Hose Stop A hose stop should be used to prevent damage to rollers and nozzles and to permit adjustment of free hose length. To receive a detailed parts breakdown drawing for Series SSLN700, request ISO 72; for Series SSN700, request ISO 7. Pressure Gauges, Steel Case Dry 2 Dry, 4 Bottom Stem 2 2 Dry, 4 Bottom Stem 0 0 05 0-50 00-5 Dry 2CS 4LM 05 05 0 0-00 00-0 Dry 2CS 4LM 0 0 02 0-600 00-60 Dry 2CS 4LM 0 0 02 0-00 0-00 Dry 2CS 4LM 20 20 05 0-60 0-60 Dry 2CS 4LM 20 20 05 0-200 0-200 Dry 2CS 4LM 50 50 0 0-00 0-00 Dry 2CS 4LM 0005 0005 00 0-000, 000-0 Dry 2 2CS 4LM 000 000 002 0-6000, 000-60 Dry 2 2CS 4LM 000 000 002 0-000, 00-00 Dry 2 2CS 4LM 0020 0020 005 0-600, 00-60 Dry 2 2CS 4LM 0020 0020 005 0-2000, 00-200 Dry 2 2CS 4LM 0050 0050 00 0-000, 00-00 Dry 2 2CS 4LM 0050 0050 00 0-4000, 00-400 Dry 2 2CS 4LM 000 000 020 0-6000, 00-600 Dry 2 2CS 4LM 000 000 020 0-,000 0-000 Dry 2 2CS 4LM 0200 0200 050 0-2,000 0-2000 Dry 2 2CS 4LM 0500 0500 00 0-,000 0-000 Dry 2 2CS 4LM 000 000 00 0-5,000 0-5000 Dry 2 2CS 4LM 9
-800-686-580 FAX: -877-94-467 Pressure Gauges, Steel Case Dry continued 2 Dry, 4 Center Back Mount 0 0 02 0-600 00-60 Dry 2CS 4CBM 0 0 02 0-00 0-00 Dry 2CS 4CBM 20 20 05 0-60 0-60 Dry 2CS 4CBM 20 20 05 0-200 0-200 Dry 2CS 4CBM 50 50 0 0-00 0-00 Dry 2CS 4CBM Pressure Gauges, Stainless Case Liquid Filled 2 2 Stainless Steel, Liquid Filled, Brass Internals, 4 Bottom Stem 2 2 Stainless Steel, Liquid Filled, Brass Internals, 4 Center Back Mount 0 Hg 000-00Vac LF 2 2SS 4LM 0 Hg 00-00Vac LF 2 2SS 4LM 0 Hg 060-060Vac LF 2 2SS 4LM 0 Hg 60-60Vac LF 2 2SS 4LM 0005 0005 00 0-0000, 0000-0 LF 2 2SS 4LM 000 000 002 0-60000, 0000-60 LF 2 2SS 4LM 000 000 002 0-0000, 000-00 LF 2 2SS 4LM 0020 0020 005 0-6000, 000-60 LF 2 2SS 4LM 0020 0020 005 0-20000, 000-200 LF 2 2SS 4LM 0050 0050 00 0-0000, 000-00 LF 2 2SS 4LM 0050 0050 00 0-40000, 000-400 LF 2 2SS 4LM 000 000 020 0-60000, 000-600 LF 2 2SS 4LM 0200 000 020 0-,0000 00-000 LF 2 2SS 4LM 000 000 050 0-,5000 00-500 LF 2 2SS 4LM 0200 0200 050 0-2,0000 00-2000 LF 2 2SS 4LM 0500 0500 00 0-,0000 00-000 LF 2 2SS 4LM 0500 0500 00 0-4,0000 00-4000 LF 2 2SS 4LM 000 000 00 0-5,0000 00-5000 LF 2 2SS 4LM 000 000 200 0-6,0000 00-6000 LF 2 2SS 4LM 2000 2000 200 0-0,000 0-0000 LF 2 2SS 4LM 000 000 500 0-5,000 0-5000 LF 2 2SS 4LM 000 000 002 0-60000, 0000-60 LF 2 2SS 4CBM 000 000 002 0-0000, 000-00 LF 2 2SS 4CBM 0020 0020 002 0-6000, 000-60 LF 2 2SS 4CBM 0020 0020 005 0-20000, 000-200 LF 2 2SS 4CBM 0050 0050 00 0-0000, 000-00 LF 2 2SS 4CBM 0050 0050 00 0-40000, 000-400 LF 2 2SS 4CBM 000 000 020 0-60000, 000-600 LF 2 2SS 4CBM 000 000 020 0-,0000 00-000 LF 2 2SS 4CBM 000 000 050 0-,5000 00-500 LF 2 2SS 4CBM 0200 0200 050 0-2,0000 00-2000 LF 2 2SS 4CBM 0500 0500 00 0-,0000 00-000 LF 2 2SS 4CBM 000 000 00 0-5,0000 00-5000 LF 2 2SS 4CBM 2000 2000 200 0-0,000 0-0000 LF 2 2SS 4CBM 000 000 500 0-5,000 0-5000 LF 2 2SS 4CBM 92