Submersible Pumps Submersible Pump Series - QDX QDX series submersible motor pump is mainly composed of three parts: pump, mechanical seal and motor. Pump is at the bottom part, which adopt centrifugal Impeller. Motor is at the upper part of pump and it can be connected with single-phase asynchronous motor or three-phase motor. Mechanical seal between pump and motor, it s kind of double end mechanical seal 0 rings are applied In all static joints of the submersible pump. Inner-installed protector prevents the pump from damages due to abnormal power, clog and overload etc. Pump body : Aluminium Impeller : Cast iron / Aluminium Mechanical Seal : Stainless steel / Carbon-ceremic Shaft : 45#steeI or stainless iron Power Flow Head Speed Pump dia Package Dimension(mm) & GW Code No. HP kw (m³/h) (m) (r/min) inch L W H Kg QDX1.5-17-0.37 0.55 0.37 1.5 17 1 390 195 165 7 QDX3-18-0.55 0.75 0.55 3 18 1 395 270 240 9.5 QDX1.5-32-0.75 1 0.75 1.5 32 1 420 240 220 13.5 QDX3-24-0.75 1 0.75 3 24 2900 1 420 240 220 13.5 QDX8-18-0.75 1 0.75 8 18 1.5 405 200 220 11.5 QDX10-16-0.75 1 0.75 10 16 2 405 200 220 11.5 QDX15-10-0.75 1 0.75 15 10 2 405 200 220 12 96
Submersible Pump Series - QDX - S QDX series submersible motor pump is mainly composed of three parts: pump, mechanical seal and motor. Pump is at the bottom part, which adopt centrifugal Impeller. Motor is at the upper part of pump and it can be connected with single-phase asynchronous motor or three-phase motor. Mechanical seal between pump and motor, it s kind of double end mechanical seal 0 rings are applied In all static joints of the submersible pump. Inner-installed protector prevents the pump from damages due to abnormal power, clog and overload etc. Pump body : Cast Iron Impeller : Cast iron / Aluminium Mechanical Seal : Stainless steel / Carbon-ceremic Shaft : 45#steeI or stainless iron Power Flow Head Speed Pump dia Package Dimension(mm) & GW Code No. HP kw (m³/h) (m) (r/min) inch L W H Kg QDX1.5-17-0.37S 0.55 0.37 1.5 17 1 470 225 193 12.5 QDX3-18-0.55S 0.75 0.55 3 18 1¼ 470 225 193 14.5 QDX1.5-32-0.75S 1 0.75 1.5 32 1 510 250 193 19 QDX6-18-0.75S 1 0.75 6 18 2900 1¼ 510 225 193 19 QDX15-10-0.75S 1 0.75 15 10 2 510 225 193 19 97
For Square Area Submersible Pump Series - SGP Pumps For Side Area Installation and applications SGP series stainless steel submersible pumps can be used for garden watering, oxygenating of water cluster box or in supplying and draining Water for ordinary places and characterized by corrosion resistance. small volume, light weight and convenient operation. It Is fitted with multiple water-outlet pipes, and self-regulated according to the requirements of its lift and flow, it can be used At a deadlock (it is fitted with a floating switch, so It is possible to carry out automatic control of start-stop action under no one s care ) It s with singlephase Capacitor A/C motor and with a thermal protector, it can be cut-off automatically in the case of overheat or high current, thus ensuring safe and reliable running under worse circumstances. Pump body : Stainless Steel Impeller : Nylon Mechanical Seal : Stainless steel Shaft : 45#steeI or stainless steel Thermal protector Code No. Head Capacity Voltage Frequency Output Power Discharge Size Packaging Size Weight (m) (m³/h) (V) (Hz) (kw) (HP) (mm) (cm) (kg) SGP3-5-0.12 5 Max:6 3 Max:6 220 50 0.12 0.17 25 14 x 14 x 34 5.5 SGP1.5-7-0.12 7 max:8 1.5 Max:6 220 50 0.12 0.17 25 14 x 14 x 34 5.5 SGP5-7-0.25 7 Max:9 5 Max:10 220 50 0.25 0.33 40 15.5 x 15.5 x 35 7.5 SGP6-14-0.55 14 Max:18 6 Max:13 220 50 0.55 0.75 40 19 x 19 x 40 9.5 SGP10-10-0.75 10 Max:14 10 Max:14 220 50 0.75 1 50 19 x 19 x 37 12 SGP3-25-0.55 25 Max:27 3 Max:11 220 50 0.55 0.75 50 21 x 21 x 45 13.5 SGP3-30-0.75 30 Max:33 3 Max:12 220 50 0.75 1 50 21 x 21 x 45 15.3 SGP3-35-1.1 35 Max:38 3 Max:12 220 50 1.1 1.5 50 21 x 21 x 47 17 SGP6-30-1.5 30 Max:33 6 Max:16 220 50 1.5 2 50 21 x 21 x 49.5 17.5 SGP8-20-1.1 20 Max:25 8 Max:20 220 50 1.1 1.5 50 21 x 21 x 45 15 SGP6-24-1.1 24 Max:28 6 Max:20 220 50 1.1 1.5 50 21 x 21 x 45 15 SGP10-20-1.5 20 Max:25 10 Max:25 220 50 1.5 2 50 21 x 21 x 46.5 16 SGP10-32-2.2 32 Max:38 10 Max:30 380 50 2.2 3 65 21 x 21 x 54 28 98
Stainless Steel & Multiple Sinking Pumps - SGP 60-80 Characteristics & Usage Range SGP6O/8O series pump is the latest designed. Max. Advantages: The overall frame uses 304 superior stainless steel material with the attractive and durable outline, small bulk. It only has 128mm of outer diameter. It uses single phase power source with the convenient installation and use. The shaft uses antiwear mechanical sealing with the strong anti-corrosiveness, (PH value 4~10), low noise, non leakage, long service life. This pump is of the high efficiency, stable performance. It can be used with full delivery lift. It can completely satisfy the high-rise drinking water and deep-iying water source supply, the national water-saving trickle irrigation, sprinkler irrigation, sprinkler irrigation, micro-irrigation projects etc. For Side Area Pump body : Stainless Steel Impeller : ABS / PPO Diffuser : ABS / PPO Mechanical Seal : Stainless steel Shaft : 45#steeI or stainless steel Technical Data Code No. Head Capacity Voltage Frequency Output Power Discharge Size Packaging Size Weight (m) (m³/h) (V) (Hz) (kw) (HP) (mm) (cm) (kg) SGP60-5-1.1 40 Max:55 1.5 Max:6.5 220 380 50 1.1 1.5 40 22 x 22 x 58.5 12.7 SGP80-7-1.5 60 Max:75 1.5 Max:6.5 220 380 50 1.5 2 40 22 x 22 x 69.5 15.2 99
Submersible Pump Series - SGP - S Pumps Installation and applications SGPS series is an open Impeller centrifugal submersible drainage pumps. The Impeller mounted on the drive shaft, consists of a back disk and biades. The fluid enters the rotating blade channel via the strainer where it moves radially from the centre outwards, acquiring energy both in the form of pressure and increased speed. When it leaves the impeller the fluid is conveyed into the volute. Here part of the kinetic energy is transformed into pressure energy and the fluid leaves the pump via the vertical delivery opening in the pump body. Correct motor cooling is ensured pumped fluid. Pump body : Stainless Steel Impeller : ABS / PPO Diffuser : ABS / PPO Mechanical Seal : Stainless steel Shaft : 45#steeI or stainless steel Code No. Head Capacity Voltage Frequency Output Power Discharge Size Packaging Size Weight (m) (m³/h) (V) (Hz) (kw) (HP) (mm) (cm) (kg) SGP7-7-0.55 7 Max:9 7 Max:15 220 380 50 0.55 0.75 65 22 x 22 x 48 12 SGP20-5-0.75 5 Max:10 20 Max:25 220 380 50 0.75 1 65 22 x 22 x 50.5 13 SGP15-7-1.1 7 Max:12 15 Max:20 220 380 50 1.1 1.5 65 22 x 22 x 51.5 14 SGP25-7-1.5 7 Max:12 25 Max:30 220 380 50 1.5 2 65 22 x 22 x 53.5 15 SGP7-15-1.1 15 Max:17 7 Max:15 220 380 50 1.1 1.5 65 15 x 15 x 63.3 18 SGP10-15-1.5 15 Max:18 10 Max:20 220 380 50 1.5 2 65 15 x 15 x 63.3 19 100
Submersible Sewage Pump Series - WQD-S Pumps Installation and applications WQD Series Sewage / Dirt submersible pump is used extensively in industrial, mining and architectural operations. It s made of hard alloy and reliably wellsealed and equipped with overheat / overload protection devise, it is also featured by its long durability and safe for use. Pump body : Cast iron Motor body : Stainless steel / Plating Impeller : Brass / Cast iron Diffuser : Cast iron Mechanical Seal : Stainless steel / Carbon-ceremic Shaft : 45#steeI or stainless iron Code No. Power Voltage Flow Head Speed Discharge size Package Size Weight HP kw (V) (m³/h) (m) rpm (mm) (mm) (kg) WQD2-5-0.18S 0.25 0.18 2 5 32 370 x 195 x 165 9 WQD3-5-0.25S 0.35 0.25 220/380 3 5 2900 32 370 x 195 x 165 10 101
Sewage / Dirt Submersible Pump Series - WQD-S Pumps Installation and applications WQD series sewage / dirt submersible pump is used extensively in industrial, mining and architectural operations. It s made of hard alloy and reliability well-sealed and equipped with overheat/overload protection device, it is also featured by its long durability and safe for use. Pump body : Cast iron Motor body : Stainless steel / Plating Impeller : Brass / Cast iron Diffuser : Cast iron Mechanical Seal : Stainless steel / Carbon-ceramic Shaft : 45#steeI or stainless iron Code No. Power Voltage Flow Head Speed Discharge size Package Size Weight HP kw (V) (m³/h) (m) rpm (mm) (mm) (kg) WQD5-7-0.37S 0.55 0.37 5 7 32 370 x 195 x 165 11.3 WQD6-7-0.45S 0.60 0.45 6 7 50 470 x 225 x 193 12.5 WQD7-8-0.55S 0.75 0.55 220/380 7 8 2900 50 470 x 225 x 193 14.5 WQD10-7-0.75S 1.0 0.75 10 7 50 510 x 225 x 193 19 102
Submersible Sewage Pump Series - WQD-S Pumps Installation and applications This advanced WQ series, a branch of single-phase drainage pumps, will be your ideal drainage helper. It can work safely and efficiently at high flux with its feature of complete head. The design is wide tunnel type which helps to convey the long fiber liquid or the solid whose diameter is about 15~35mm. The selection of bottom suction stainless steel and special iron make the pump capable of complete drain and high resistance of abrasion and corrosion. The float switch can automatically control on and off with float switch. The protector in the motor can automatically cut off the power when it overheat or over current, thus guarantee the security and reliability of running even in the challenging environment. Condition of use 1. The maximum deep it is allowed in water is 5m from its center of impeller 2. The trans medium s temperature shouldn t be higher than 40 C 3. The trans medium s PH scope is from 4-10 4. The kinematics viscosity of the trans medium is from 7 x 10 ~ 23 x 10 m/s 5. The maximum density of the trans medium is 1.2 x 10³ kg/m³; Technical Data At 50Hz Code No. Power Voltage Flow Head Speed Discharge size Package Size Weight HP kw (V) (m³/h) (m) rpm (mm) (mm) (kg) WQD15-7-1.1s 1.5 1.1 15 7 50 560 x 225 x 275 21.5 WQD15-10-1.5s 2.0 1.5 220/380 15 10 2900 40 560 x 225 x 275 24 103
Sewage / Dirt Submersible Pump - WQD-1300 Function and Feature WQD1300 submersible sewage pumps with cutter is an ideal machine for draining sewage. A high-speed rotating cutter is assembled at the sewage into pieces, to avoid blocking and jamming the impeller. It is suitable for draining sewage in public health facilities, factories, mines and families. Coupling with a float switch, it can automatically turn on and off with the change of the liquid level. The protector In the motor can automatically cut off the power in case of overheating or overloading, thus guarantee the security and reliability of pump's running even in a extremely tough environment. Condition of use 1. Depth it is allowed in water is 5m from its center of impeller. 2. The trans medium's temperature shouldn't be higher than 40 C 3. The trans medium's PH scope is from 4-10 4. The kinematics viscosity of the trans medium is from 7 x 10 ~ 23 x 10 m/s 5. The maximum density of the trans medium is 1.2 x 10 kg/m³ Code No. Power Voltage Flow Head Speed Discharge size Package Size Weight HP kw (V) (m³/h) (m) rpm (mm) (mm) (kg) WQD1300 1.77 1.3 220/380 12 8 2900 50 560 x 225 x 275 23.5 104