TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES
FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing to assure fast, reliable priming and repriming capabilities. Once initially primed the pump will reprime automatically. Impeller and Wear Ring: Silicon Bronze construction, replaceable wear rings extend pump life, designed for maximum efficiency and repriming capabilities. Impeller is enclosed type, balanced for smooth operation, keyed to motor shaft. Casing and Diffuser: Cast iron construction, featuring a back pull out design with tapped connections provided for casing fill and drain to simplify pump start up and removal at the end of the season. Top accessible pump feet for easy access to hold-down bolts. Casing o-ring sealing simplifies maintenance. Shaft Sleeve: 3 series stainless steel replaceable sleeve provides motor shaft protection. Mechanical Seal: Carbon/Ceramic faces, BUNA elastomers, 3 series stainless steel metal parts. APPLICATIONS Lawn irrigation Dewatering Liquid transfer Plot irrigation Livestock watering SPECIFICATIONS Pump Flows to 24 GPM Heads to 165 feet Reprime capabilities to 25' 2" through 3" suction 1½" through 2½" discharge Maximum temperature 16ºF Motor NEMA standard, JM shaft, Open Drip Proof or Totally Enclosed Fan Cooled. Single phase: 3 HP, 115/23 V; 5 HP, 23 V. Three phase: 3 and 5 HP, 28-23/46 V or 575 V. Note: Pump is not rated for 5 Hz service. PAGE 2
ORDERING INFORMATION 3 SP M 3 F Built-in Suction Flange Mechanical Seal Options Seal Metal Part Rotary Stationary Elastomers Code Parts No. Ceramic BUNA 1K13 Carbon 3 316SS 1K27 Sil-Carb Viton 5 Sil-Carb 1K64 Motor Type 1 = 1 PH DP 5 = 3 PH, 575 V, DP 2 = 1 PH TE 6 = 3 PH, 575 V, TE 3 = 3 PH DP 4 = 3 PH TE M = Medium Head Impeller/Diffuser H = High Head Impeller/Diffuser Self Primer Horsepower 3 = 3 HP 5 = 5 HP Medium Head Order Number HP PH Enclosure Voltage 3SPM1 1 ODP 115 / 23 3SPM2 1 TEFC 28-23 3 3SPM3 3 ODP 28-23/46 3SPM4 3 TEFC 28-23/46 5SPM1 1 ODP 23 5SPM2 1 TEFC 28-23 5 5SPM3 3 ODP 28-23/46 5SPM4 3 TEFC 28-23/46 Suction Flange SPF25 SPF3 High Head Order Number HP PH Enclosure Voltage 3SPH1 1 ODP 115 / 23 3SPH2 1 TEFC 28-23 3 3SPH3 3 ODP 28-23/46 3SPH4 3 TEFC 28-23/46 5SPH1 1 ODP 23 5SPH2 1 TEFC 28-23 5 5SPH3 3 ODP 28-23/46 5SPH4 3 TEFC 28-23/46 Suction Flange SPF2 SPF25 Use standard Order No. for pump only or suction flange. Add an F suffix to Order No. to order a pump with suction flange. PAGE 3
PUMP PERFORMANCE (capacity in GPM) 3 HP High Head Model Model PSI Feet 5' 1' 15' 2' 2 46.2 138 136 13 * 3SPH1 3 69.3 12 114 18 11 3SPH3 4 92.4 91 88 8 69 5 115.5 57 47 32 2 * Operation not recommended at this point. METERS FEET 3SPH with SPF2 CURVE NO. CN681R2 14 4 12 3 1 TDH 2 8 6 1 4 2 15 1 5 1 2 5 Eff. % 2 4 6 8 1 12 14 US GPM 16 5 1 15 2 25 3 CAPACITY m 3 /hr PAGE 4
PUMP PERFORMANCE (capacity in GPM) 5 HP High Head Model Model PSI Feet 5' 1' 15' 2' 25' 2 46.2 182 176 * * * 3 69.3 168 164 158 5SPH1 * * 4 92.4 147 144 139 134 5SPH3 * 5 115.5 12 118 114 18 96 6 138.6 88 86 78 64 55 * Operation not recommended at this point. METERS 5 FEET 18 5SPH with SPF25 CURVE NO. CN682R2 16 4 14 12 3 1 TDH 8 2 6 1 4 25 2 15 1 5 1 2 5 Eff. % 2 4 6 8 1 12 14 16 18 1 2 3 4 CAPACITY US GPM m 3 /hr PAGE 5
PUMP PERFORMANCE (capacity in GPM) 3 HP Medium Head Model Model PSI Feet 5' 1' 15' 2' 25' 2 46.2 163 155 147 138 114 3SPM1 3 69.3 127 117 17 95 84 3SPM3 4 92.4 77 47 * * * * Operation not recommended at this point. METERS FEET 12 3SPM with SPF25 CURVE NO. CN683R1 3 1 8 TDH 2 6 1 4 2 25 2 15 1 5 1 5 Eff. % 2 4 6 8 1 12 14 16 18 2 US GPM 5 1 15 2 25 3 35 4 CAPACITY m 3 /hr PAGE 6
PUMP PERFORMANCE (capacity in GPM) 5 HP Medium Head Model Model PSI Feet 5' 1' 15' 2' 25' 2 46.2 218 211 22 167 * 5SPM1 3 69.3 187 182 172 164 * 5SPM3 4 92.4 155 148 138 133 111 5 115.5 119 17 96 9 65 * Operation not recommended at this point. METERS FEET 16 5SPM with SPF3 CURVE NO. CN684R1 14 4 12 3 1 TDH 8 2 6 4 1 2 25 2 15 1 5 1 5 Eff. % 2 4 6 8 1 12 14 16 18 2 22 24 US GPM 5 1 15 2 25 3 35 4 45 5 CAPACITY m 3 /hr PAGE 7
DIMENSIONS AND WEIGHTS AB DISCHARGE NPT 3.94 2.81 2.53 C MAX. 8. SUCTION NPT X ØP D Y 5.25 E E A MOTOR FEET.54 L F F B 4X ØH 2X Ø.56 2X Ø5/16-18 UNC 1. 8.5 2.75 PUMP FEET.75 1. Pump C Wt. HP PH Suction Disch. A AB B D E F ØH L ØP X Y Model MAX. (lbs.) 3SPH1 1 8.63 6.87 6.5 4.5 3.75 2.75.41 12.78 7.88 135 2 1½ 3SPH3 3 6.5 5.61 5.94 3.5 2.75 2.5.34 12.16 6.62 115 3 12.56 3SPM1 1 6.87 7.88 135 3.58 6.5 3SPM3 3 5.73 6.62 115 2½ 2 5SPH1 1 6.75 155 8.63 6.5 4.5 3.75 2.75.41 12.78 5SPH3 3 5.85 135 5 13.8 7.88 5SPM1 1 155 3 2½ 6.87 4.62 7.44 5SPM3 3 135 NOTES: Dimensions are approximate, not for construction purposes. Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (8) 453-6777 Fax: (888) 322-5877 www.gouldswatertechnology.com Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. PrimeLine is a trademark of Xylem Inc. or one of its subsidiaries. 215 Xylem Inc. BSPMSPH R1 July 215