Ready to G O OO OO The Demag 5-axle all terrain cranes
Use your maximum lifting capacity The IC-1 Plus control system adds additional value to your crane as it increases flexibility and enables it to perform more jobs. IMPROVE YOUR VERSATILITY IN THE NARROWEST JOBSITES When using the asymmetrical outrigger base, the crane can work in confined spaces without losing lifting capacity. QUICKLY READY TO LIFT Efficient set-up procedures and systems facilitate quick and secure rigging. Once the superstructure is positioned in a defined slewing range, the counterweight placed on the carrier is automatically rigged. Backpack counterweight with symmetrical configurations can be used on left or right. Low center of gravity, flat support surface and integrated attachment points for easy handling. PERFORM LIFTS WHERE HIGHER CAPACITY CRANES WERE NEEDED Instantaneous capacity calculations allow you to take full advantage of the maximum lifting capacity available at any given slewing position for any crane configuration, especially when working with reduced outrigger settings and reduced counterweight. Demag 5-axle all terrain cranes The Demag 5-axle cranes offer a great range of advantages, provide low total cost of ownership and a lifting capacity from 130 to 250 tonnes. Working responsibly Demag 5-axle cranes are fitted with a great range of features to aid with safe and compliant operation. LIFTING CAPACITY RADAR Intuitive interface and safe operation with lift capacities based on slewing angles. +/- 30 pre-calculation of the working area, displayed in the IC-1 Plus. WORKING RANGE LIMITER Limitation of the min./max. radius, height and superstructure slewing angle. Simulation of a virtual wall. AUTOMATIC COUNTERWEIGHT DETECTION No selection of the rigged counterweight necessary, capture is automatic. Only crane operator confirmation required reduced risk of human error. 2 3
Save on counterweight transport Lifting capacity calculation based on slewing angles reduces counter weight requirements for many lifting situations as compared to pre-calculated 360 lifting capacities. The Demag 5-axle cranes offer strong lifting capacities with reduced counterweight right from the start. And that saves transport costs. Short and agile The Demag 5-axle cranes are the most compact of their class. That means you can access a greater range of sites and accept more contracts in this class. They maneuver precisely on-site: all-wheel steering as standard means great steerability. Road mobility: Clean axle loads Axle load and axle spacing can be adapted to nearly every market in the world. The axle load display on the board computer informs the crane operator about actual axle loads. 4 5
Demag family concept Demag 5-axle line-up All Demag 5-axle cranes are the most compact in their respective class Expect lower operating costs. Thanks to the Demag family concept, equipment is interchangeable between the 5-axle cranes, allowing multiple applications. Many parts are identical, ranging from built-in components through main boom extensions to hoisting systems. AC 130-5 Max. system length, m (ft): 130 60 86.5 (140) (197) (284) Carrier: 12.17 m (39.9 ft) Total: 14.45 m (47.4 ft) AC 160-5 IDENTICAL WINCHES MAIN BOOM EXTENSION INTERCHANGEABLE COMPONENTS Hoist 2 is identical for all 5-axle cranes. Identical rigging frame for attaching hoist 2. The main boom extension (HAV), MS, VA (not available for AC 220-5), Swing-away rooster sheave, heavy lift attachment are identical; also with the new AC 300-6. Great for service: interchangeable components reduce inventories and service team training requirements for each crane are reduced. Longest main boom in its class Max. system length, m (ft): 160 (180) 68 (223.1) 95 (311.7) Carrier: 12.61 m (41.4 ft) Total: 14.51 m (47.6 ft) Demag service & product support AC 220-5 Longest main boom of all 5-axle cranes Demag is part of the Terex Cranes group. With this you get a team of people who are invested in your success. We ve assembled a comprehensive array of world-class support services with your business in mind. From our 24/7 customer service to keep you up and running day and night; to original Demag parts, critical to maintaining peak performance; to expert, responsive maintenance and repair service; and even training for your staff. 220 (245) 78 (255.9) Maximum system length, m (ft): 99 (324.8) Carrier: 13.26 m (43.5 ft) Total: 14.52 m (47.6 ft) AC 250-5 6 TECH SUPPORT PARTS DEMAG WORKS 24/7 So you can too. MAINTAIN PEAK PERFORMANCE Maintain uptime and support your business. WARRANTY PROTECTING YOUR INVESTMENT* New Demag AC and CC cranes are covered by a full two year factory warranty. TRAINING INCREASE YOUR PRODUCTIVITY Let our crane experts show you how to get the most from your equipment. MAINTENANCE/ REPAIRS A NEW LIFE FOR YOUR CRANE Who better to repair and service your crane than the ones who built it. * Two year factory warranty valid only on new 2017 model year Demag all terrain and crawler cranes sold by Terex Cranes in 2017. Warrantable repairs exclude any downtime caused by damage to or misuse of the crane. Full Terex Cranes standard warranty terms and condition apply. Two year factory warranty program may be changed or terminated at any time. Please contact Terex Cranes or your local Terex Cranes dealer for details, or visit www.terex.com/cranes. 250 (300) 70 (229.7) Maximum system length, m (ft): 102 (334.6) Carrier: 13.26 m (43.5 ft) Total: 14.43 m (47.3 ft) 7
March 2017. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the corresponding Operator s Manual when using our equipment or to otherwise act responsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries.all rights are reserved. Terex, Demag and Above. Ahead. Always. are trademarks owned or licensed by Terex Corporation or its subsidiaries. Please note: Not all products are available in all countries according to legal requirements.please consult your local Terex distributor for more information. Copyright Terex Cranes 2017 TEREX CRANES GERMANY GMBH Europa Allee 2 66482 Zweibrücken Germany E info.cranes@terex.com T + 49 6332 830 www.terex.com/cranes linkedin.com/company/demagmobilecranes facebook.com/demagmobilecranes/ youtube.com/terexcranesmarketing