Security-Mate Cylinders. Maxwell Lever #77 RQ Small Rose With Ring Design

CHECK OUT WHAT'S NEW @ HI-SECURITY Cylinders Drake Plate Design Security-Mate Cylinders Maxwell Lever #77 RQ Small Rose With Ring Design Omni Lever #78 1SS50N Cylindrical Cartridge Institutional Life Safety Knobset 1SS50K Cylindrical Cartridge Institutional Life Safety Deadlatch 5PDA Mortise Lockset Style Hospital Push/Pull 1PDN Cylindrical Cartridge Style Hospital Push/Pull Visit Our NEW Website @

2007 / 2008 PRICE LIST EFFECTIVE September 2007 www.marksusa.com Call: 631-225-5400 Outside NYS: 1-800-526-0233 Fax: 631-225-6136 Table of Contents How To Order Ordering Information...1 Product Numbering System...2 Mortise Locksets Mortise Lock Trim Information...3 How To Order Mortise Locksets...4-5 Plate Designs Handle Set Designs Cambridge......62-63 Century.........64-65 Barrier..........6-7 Orleans.........64-65 Cambridge......8-11 Classic.........12-15 Capitol..........16-19 Crown..........20-23 Drake..........24-27 Great Barrier.....28-29 Crown..........66-67 Grand Crown.....66-67 Georgetown.....68-69 Heritage........70-71 Madison........72-73 Heritage........30-33 Grand Madison...72-73 Kensington......34-37 Madison........38-41 Newport.........42-45 New Yorker......46-49 Royale..........50-53 Towne..........54-57 Rose Designs Rose w/ring........58-61 Plain Rose..........58-61 Small Rose.........58-61 Small Rose w/ring...58-61 Newport.........74-75 Portland.........76-77 Royale..........78-79 Towne..........80-81 Grand Towne....80-81 Claremont.......80-81 Wharton........82-83 Georgian........84 Square Rose........58-61

Ornamental Iron Ornamental Iron 85-87 Mortise Parts & Trim Mortise Lock Bodies/Deadlocks...88-92 Mortise Lockset Functions...93-94 Mortise Lock Cylinders & Keying...95-96 Mortise Lock Parts...97-98 Trim Lock Parts...99-100 How to Order Trim Lock Parts...101 Cylindrical Locksets How to Order Cylindrical Locksets...102 80 & 10 Series Knob Sets 103-104 95 & 70 Survivor Lever Sets 105-106 Contract Line 1120/1150 Series...107 Cylindrical Knob/Lever Functions...108 How to Order Cylindrical Locksets...109 Cylindrical Accessories...110-111 Keys & Keying Information...112 Tubular Locksets How to Order Tubular Locksets...113 Rose w/ring 114-115 Plain Rose 114-115 Small Rose 114-115 Small Rose w/ring 114-115 Square Rose 114-115 How To Order Rose Design Tubular Locksets...116 Tubular Lockset Accessories & Functions...117 Residential & Light Commercial Knob & Tubular Lever Sets...118 130 Series Defender Tubular Deadbolts...119 145 Series Defender Cylindrical Cartridge Deadlatches..119 Defender Series Accessories...120 Defender Series Functions...121 How to Order Defender Locksets...121 Gatelocks...122 Custom Locksets...123-132 Institutional Life Safety...133-135 i-que Electronic Access Control, REX & Electrified Locksets IQK* Series Standard Features...136 IQK* Series Technical Specs...137 IQK* Series Digital Access Control Keypads...138 IQ Stand-Alone Access Control...139 IQ_K* Stand-Alone Access Control...140 IQ_KP* Prox Stand-Alone Access Control...141 IQ_KK* Series Double Sided Keypad...142 i-que Electronic Access Control, REX & Electrified Locksets (cont'd.) Request to EXit Cylindrical Lock Sets...143 Electrified Cylindrical/Mortise Lock Sets...144 i-que Options & Accessories...145-146 i-dat MARK 2 USB Unit with U3 Memory Stick...147 Prox Accessories...147 Glossary & Mortise Functions...148 HI-SECURITY Cylinders & Accessories HI-SECURITY Cylinders NON-UL...149 HI-SECURITY Cylinders UL 437...150 Security-Mate & Special Application Cylinders...151 How to Order HI-SECURITY Cylinders & Keys...152 HI-SECURITY Keys, Cams & Tailpieces...153 HI-SECURITY Parts List...154 Index (old part # reference)...back Cover Lifetime Mechanical Limited Warranty MARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-marks products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing. Lifetime Electronic Limited Warranty MARKS USA warrants to the original purchaser that its products are free from defects in materials and workmanship so long as they occupy the premises. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge at its sole discretion. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, improper application or specification, ordinary wear and tear, misuse, abuse, accident, improper voltage, unauthorized service, or use with unauthorized non-marks products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages or any shipping charges related to exercising of this warranty. Lifetime Finish Limited Warranty MARKS USA finishes with the suffix E indicate finishes which have a PVD coating. Locksets with the 3E finish will be warranted to the original user against tarnishing as long as the user occupies the residential premises upon which the lockset was originally installed. Locksets with this finish, used in commercial applications will be limited to two years. This warranty does not cover scratches, abrasion, abused or misused products. Upon return of a defective product to Marks USA, we will, at our sole discretion, either replace the product or refund the purchase price in exchange for the product. Due to climatic conditions, chemical or abrasive actions, other finishes are excluded from this warranty. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages arising from the sale of the product. Terms & Conditions TERMS: 1%-10, Net 30. FREIGHT: Prices are F.O.B. Amityville, New York. Freight allowed on shipments over $4000 net invoice value within Continental U.S. RETURNED GOODS: Goods may not be returned without a Returned Goods Authorization (RGA) and are subject to a restocking charge. RGA label must be on all cartons. MINIMUM CHARGE: Orders for less than $250 net invoice are subject to a $25 handling charge. MINIMUM SALES VOLUME: The company reserves the right to discontinue direct sales to any customer who does not meet the minimum annual sales requirements during any 12 month period. Minimum annual sales volume is determined on the basis of accepted orders during each applicable year. All orders are acknowledged. It is the customers responsibility to check accuracy of the acknowledgement when received.

Mounts & Displays Backset Required Information DOOR EDGE Backset CENTER LINE OF DOOR KNOB OR LEVER Mortise Locksets Handing Required Information (LH) LEFT HAND (RH) RIGHT HAND OUTSIDE (LHR) LEFT HAND REVERSE (RHR) RIGHT HAND REVERSE OUTSIDE All locksets supplied 1/2 (LH) and 1/2 (RH) unless otherwise specified. Door Thickness Required Information Mounts & Displays available - Consult factory. STANDARD DOOR THICKNESS RANGE Mortise Locksets: 1-3/4" Cylindrical Locksets: 1-5/8" through 1-7/8" Ornamental locksets: 1" through 1-1/4" Tubular Locksets: 1-3/8" through 1-3/4" Other door thickness: Consult factory. Specify: Door thickness (A) Lock location (B) OUTSIDE B A LOCK DOOR EDGE 1

Mortise Locksets How To Order MARKS USA Product Numbering System 1. Select type of lockset. 2. See corresponding pages in the catalogues for information regarding this type of lock. 3. Create the part number for your lock by selecting the information from fields 1 through 6. (See the pages at the beginning of each section for more information.) Please note dummy trim is Series 0. 4. Options must be listed in Alpha - Numeric order. 5. Note that if Part Number is over 15 characters, it becomes a special number with the option field *1 (Your options will then be listed separately.) Please note the standard (default) features of each lock - they do not need to be selected in the options section. 6. Please indicate keying detail or special instructions on each item ordered. 7. Templates are available on the website. Product # Examples 1 2 3 4 5 6 Knob/Lever/ Plate/Rose Handle Design Design Lock Series MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num Examples: Mortise Locksets 7 NY 10 A / 3 - G3 SERIES PLATE KNOB FUNCTION FINISH OPTIONS Tubular Locksets 1 RR 60 N / 3 SERIES ROSE KNOB FUNCTION FINISH Examples: 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num Mortise Deadlocks 3 K / 3 R SERIES FUNCTION FINISH OPTIONS Cylindrical Locksets 110 AB / 32D E7 SERIES FUNCTION FINISH OPTIONS Ornamental Iron 9215 AC / 3 W SERIES FUNCTION FINISH OPTIONS Deadbolts/Deadlatches 145 K / 32D G3 SERIES FUNCTION FINISH OPTIONS 2

Handle Set Trim Mortise Lock Trim Information Mortise Locksets Inside Inside Inside Outside Outside Outside Outside Inside ENTRANCE Cylinder/Turnpiece ENTRANCE Double Cylinder DUMMY TRIM Both Sides HANDLE SET With Ext. & Int. Handle Lever/Knob Set Trim ENTRANCE Cylinder/Turnpiece ENTRANCE Double Cylinder OFFICE/CLASSROOM PRIVACY EXTERIOR/PATIO DUMMY TRIM Both sides *Dummy cylinder optional (F17) 3

Mortise Locksets HOW TO ORDER MORTISE LOCKSETS 1 2 3 4 5 6 Lock Series Plate/Rose Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 1 Dummy Trim 0 Dummy Trim Handle Sets Only 00 Mortise Lock 4, 45, 5, 55, 6, 7, 8, 9 2 PLATES Barrier Cambridge Classic Century Capitol Crown Claremont Drake Georgetown Great Barrier Grand Madison Grand Towne Heritage Kensington Madison Newport New Yorker Orleans Portland Royale Towne Wharton SERIES PLATES/ROSES DESIGN BA CB CL CN CP CR CT DR GE GB GM GT HR KE MA NE NY OR PO RY TN WT ROSES DESIGN 9602-R Rose with ring 2-9/16" dia. RR 9602 Plain rose 2-9/16" dia. RW 5602-R Small rose with ring 2-1/4" dia. RQ 5602 Small rose 2-1/4" dia. RS 7602 Square rose 2-9/16" square RX 3 KNOB/LEVER KNOBS DESIGN 1153 Round, wrought 10 1253 Ball, wrought 20 9631 Ball, forged 30 9609 Eclipse, forged 60 LEVERS DESIGN 5642 Palace 42 5652 Madison 52 5657 Monaco 57 5662 Royale 62 5672 Towne 72 5677 Maxwell 77 5678 Omni 78 5682 Plaza 82 5683 Dayton 83 5686 Crescent 86 5692 American 92 5696 Titan 96 4 MORTISE FUNCTIONS MARKS FUNCTION ANSI # KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE/VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 EX EXIT F31 J CLASSROOM F05 JM HOSPITAL F06 JR HOSPITAL F06 GL INST PRIVACY F26 EN STOREROOM DN STOREROOM EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTION F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 SO STOREROOM F25 KEYLESS N PASSAGE F01 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE DT FULL DUMMY TRIM 4

5 HOW TO ORDER MORTISE LOCKSETS FINISH MARKS ANSI # US 3 Polished Brass, Clear Coated 605 US 3E Polished Brass PVD 605E US 4 Satin Brass, Clear Coated 606, 606E US 5 Antique Brass, Clear Coated 609, 609E US 10E Satin Bronze PVD 612, 612E US 10 Satin Bronze, Clear Coated 612, 612E US 10B Dark Bronze, Clear Coated 613E US 15 Satin Nickel 619, 619E US 19 Flat Black, Powder Coated 622, 622E US 20A Dark Brown, Powder Coated 695E US 26 Polished Chrome, Plated 625 US 26D Satin Chrome, Plated 626 US 32 Polished Stainless Steel 629 US 32D Satin Stainless Steel 630 6 LOCK FRONT CODE PRICE 1-1/16" x 5-5/8" R 25 1-1/16" x 7-5/8" T 21 1-1/4" x 10" U 91 1" x 7-3/4" V 21 1" x 7-1/8" W NC 1-1/4" x 8" X 21 1-1/4" x 8-5/8" Y 91 1" x 8" Z 21 TRIM MODIFICATIONS CODE PRICE Tactile knob/lever, coated ext. only A1 50 Emergency coinkey A2 26 Tamper-proof screws A3 9 Tactile knob/lever, knurled A4 50 Handicapped turnpiece A5 17 Hotel indicator A6 41 Mushroom knob interior A9 4 Engraved A11 66 Concealed cylinder A12 25 Dummy trim sub-assembly A13 Coin key w/ escutcheon plate A14 66 Coin key w/ rose A15 66 SO trim A16 Occupancy Indicator A17 83 Tactile knob/lever, coated ext. & int. A18 97 Tear Drop Occupancy Indicator A21 73 Square Trim A23 27 LOCK BODY CODE PRICE Lever override guard - outside B1* 41 Lever override guard - both sides B2* 57 Hardened pins - deadbolt B3 17 Lever springs B4 17 Pin and lever springs B5 32 Hollow spacer B6 17 8 mm hubs on square B7 17 Turnpiece hub on square B8 9 With deadbolt B9 17 5 OPTIONS FINISH DESIGNATIONS Split Finish Designation Split Finish: Exterior one finish/interior one finish designate by an X Ex: 4TN57A/3Ex15-F3 Exterior trim 3E Interior Trim US 15 Combination Finish Designation Combination Finish: Alternating different finishes on same side of trim designate by a / between finishes Ex: 4TN57A/3E/15-F3 Exterior and Interior trim 3E US 15 cylinder, turnpiece, lever & frame plates. DOOR THICKNESS CODE PRICE 50 mm (2") D1 NC 57 mm (2-1/4") D2 41 60 mm (2-3/8") D3 41 1-3/4" D4 NC 1-3/8" D5 NC 1" to 1-1/4" D6 NC 63.5 mm (2-1/2") D10 66 75 mm (3") D11 83 72 mm (2-13/16") D12 83 LATCH CODE PRICE Solid latch E1 17 Hold open latch E2 32 Auxiliary latch E3 32 TRIM CHANGES CODE PRICE Lead lined F1 246 Large inside plate F2 32 Frame plates F3 163 Less inside trim** F4 NC Less outside trim** F5 NC Adjustable spring collars F10 4 Less outside knob/lever F16 Dummy cylinder F17 41 Less outside trim w/custom escutcheon** F18 NC CYLINDER CODE PRICE IC core housing - 7 Pin G1 NC Special optional keyway G2 32 Less cylinder G3 Deduct 15 Marks A keyway G4 13 IC Core housing w/9271 collar - 6 Pin G6 NC IC Core housing Schlage large format (FOR MORTISE ONLY) G7 NC ELECTRIFIED CODE PRICE Electrically Locked (EL) H9 Electrically Unlocked (EU) H10 STRIKE CODE PRICE Straight lip strike S2 3 * Not available in CP plate design. ** Consult factory before ordering. Mortise Locksets 5

Mortise Locksets BARRIER PLATE DESIGN BA Round Knob 10 Plaza Lever 82 American Lever 92 Ball Knob 20 Dayton Lever 83 Titan Lever 96 Crescent Lever 86 6

BARRIER PLATE DESIGN BA ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10-1/8" H x 4" W, Int: 10-3/4" H x 4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys 10, 20 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 32D 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 405 435 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 689 719 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 418 448 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 418 448 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 446 476 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 446 476 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 317 347 L BATHROOM F02 LF PRIVACY F19 418 448 LJ PRIVACY F22 EX EXIT F31 364 394 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 161 191 DT FULLY DUMMY 322 352 Knobs Levers 7

Mortise Locksets CAMBRIDGE PLATE DESIGN CB Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 8

CAMBRIDGE PLATE DESIGN CB ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10-1/2" H x 2-3/4" W, Int: 10-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 521 551 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 805 835 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 534 564 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 534 564 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 562 592 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 562 592 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 433 463 L BATHROOM F02 LF PRIVACY F19 534 564 LJ PRIVACY F22 EX EXIT F31 480 510 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 219 249 DT FULLY DUMMY 438 468 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 9

Mortise Locksets CAMBRIDGE PLATE DESIGN CB ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 10-1/2" H x 2-3/4" W, 30, 60 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Int: 10-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. 491 521 DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 504 534 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 532 562 FX DORMITORY F33 KEYLESS N PASSAGE F01 403 433 504 534 DUMMY TRIM 219 249 DT FULLY DUMMY 438 468 L DI BATHROOM DUMMY TRIM INSIDE F02 LF DO PRIVACY DUMMY TRIM OUTSIDE F19 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 10

HOW TO ORDER CAMBRIDGE CB PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! CB KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 9 CB 72 A / 3E 2-1/2" backset Grade 2 Mortise Lock Body Cambridge Plate Towne Lever Entrance Function Polished Brass "PVD" Finish G1 IC Core Housing QUANTITY CB / 11

Mortise Locksets CLASSIC PLATE DESIGN CL Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Monaco Lever 57 Omni Lever 78 American Lever 92 Royale Lever 62 Plaza Lever 82 Titan Lever 96 12

CLASSIC PLATE DESIGN CL ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 8" H x 2-1/2" W, Int: 8" H x 2-1/2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 10, 20 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LEVERS 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3, 10, 10B, 26D 32D 3E, 10E, 10B, 26D 32, 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 438 468 545 545 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 722 752 829 829 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 451 481 558 558 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 451 481 558 558 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 479 509 586 586 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 479 509 586 586 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 350 380 457 457 L BATHROOM F02 LF PRIVACY F19 451 481 558 558 LJ PRIVACY F22 EX EXIT F31 397 427 504 504 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 178 208 231 231 DT FULLY DUMMY 355 385 462 462 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 13

Mortise Locksets CLASSIC PLATE DESIGN CL ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 8" H x 2-1/2" W, Int: 8" H x 2-1/2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 10, 20 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LEVERS 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3, 10, 10B, 26D 32D 3E, 10E, 10B, 26D 32, 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. 408 438 515 515 421 451 528 528 449 479 556 556 N PASSAGE F01 320 350 427 427 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 421 451 528 528 178 208 231 231 DT FULLY DUMMY 355 385 462 462 Knobs Levers 14

HOW TO ORDER CLASSIC CL PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! CL KNOB DESIGN 10 20 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3 3E 10 10B 10E 26D 32 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 7 CL 20 D / 32D 2-3/4" backset Grade 2 Mortise Lock Body Classic Plate Ball Knob Office/Vestibule Function Satin Stainless Steel Finish G3 Less Cylinder QUANTITY CL / 15

Mortise Locksets CAPITOL PLATE DESIGN CP Concealed 5 pin Cylinder Option A12 Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Monaco Lever 57 Omni Lever 78 American Lever 92 Royale Lever 62 Plaza Lever 82 Titan Lever 96 16

CAPITOL PLATE DESIGN CP ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 8-1/2" H x 2-3/4" W, Int: 8-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 10, 20 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3, 10, 10B 32D 3E, 10E, 10B 32D KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL EU ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESS 456 486 557 557 740 770 841 841 469 499 570 570 469 499 570 570 497 527 598 598 497 527 598 598 N PASSAGE F01 368 398 469 469 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 469 499 570 570 415 445 516 516 187 217 237 237 DT FULLY DUMMY 373 403 474 474 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Knobs Special finishes, consult factory. Levers 17

Mortise Locksets CAPITOL PLATE DESIGN CP ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Concealed 5 pin Cylinder Option A12 Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset 42, 52, 57, 62, 82, 83, 86, Lever support springs 10, 20 72, 77, 78, 82, 92, 96 Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" 83, 86, 92, 96 Dimensions: Ext: 8-1/2" H x 2-3/4" W, Int: 8-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3, 10, 10B 32D 3E, 10E, 10B 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. 426 456 527 527 439 469 540 540 467 497 568 568 N PASSAGE F01 338 368 439 439 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 439 469 540 540 187 217 237 237 DT FULLY DUMMY 373 403 474 474 Knobs Levers 18

HOW TO ORDER CAPITOL CP PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! CP KNOB DESIGN 10 20 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3 3E 10 10B 10E 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 7 CP 96 A / 32D 2-3/4" backset Grade 2 Mortise Lock Body Capitol Plate Titan Lever Entrance Function Satin Stainless Steel Finish G3 Less Cylinder QUANTITY CP / 19

Mortise Locksets CROWN PLATE DESIGN CR Concealed 6 pin Cylinder Option A12 Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 20

CROWN PLATE DESIGN CR ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 8-1/2" H x 2" W, Int: 8-1/2" H x 2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 10, 20 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3, 26D 10, 10B, 10E, 10B, 10E, 10B, 3E, 26D 3E, 26D 32, 32D 32, 32D 26 32, 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 471 496 501 526 545 570 570 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 755 780 785 810 829 854 854 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 484 509 514 539 558 583 583 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 484 509 514 539 558 583 583 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 512 537 542 567 586 611 611 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 512 537 542 567 586 611 611 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 383 408 413 438 457 482 482 L BATHROOM F02 LF PRIVACY F19 484 509 514 539 558 583 583 LJ PRIVACY F22 EX EXIT F31 430 455 460 485 504 529 529 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 194 207 224 222 231 244 244 DT FULLY DUMMY 388 413 418 443 462 487 487 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 21

Mortise Locksets CROWN PLATE DESIGN CR ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Concealed 6 pin Cylinder Option A12 Standard Features Thru-bolted screwless knob/lever plate Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 8-1/2" H x 2" W, Int: 8-1/2" H x 2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3, 26D KEYED SINGLE CYLINDER, NO DEADBOLT 10, 10B, 32, 32D KNOBS 10, 20 30, 60 3E, 26D 10E, 10B, 3E, 26D 32, 32D LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 10E, 10B, 26 82, 83, 86, 92, 96 32, 32D D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 441 466 471 496 515 540 540 454 479 484 509 528 553 553 482 507 512 537 556 581 581 N PASSAGE F01 353 378 383 408 427 452 452 L BATHROOM F02 LF PRIVACY F19 454 479 484 509 528 553 553 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 194 207 224 222 231 244 244 DT FULLY DUMMY 388 413 418 443 462 487 487 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 22

HOW TO ORDER CROWN CR PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! CR KNOB DESIGN 10 20 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3 3E 10 10B 10E 26 26D 32 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 5 CR 20 EW / 26D 2-3/4" backset Grade 1, UL Listed Mortise Lock Body Crown Plate Ball Knob Storeroom Function Satin Chrome Finish G3 Less Cylinder QUANTITY CR / 23

Mortise Locksets DRAKE PLATE DESIGN DR Concealed 6 pin Cylinder Option A12 Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 24

DRAKE PLATE DESIGN DR ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever plate Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 11" H x 2-1/2" W, Int: 11" H x 2-1/2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys 10, 20 30, 60 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3, 26D 10, 10B, 32, 32D 3E, 26D 10E, 10B, 10E, 10B, 3E, 26D 32, 32D 26 32, 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 521 571 551 601 595 645 645 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 805 855 835 885 879 929 929 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 534 584 564 614 608 658 658 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 534 584 564 614 608 658 658 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 562 612 592 642 636 686 686 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 562 612 592 642 636 686 686 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 433 483 463 513 507 557 557 L BATHROOM F02 LF PRIVACY F19 534 584 564 614 608 658 658 LJ PRIVACY F22 EX EXIT F31 480 530 510 560 554 604 604 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 219 244 234 259 256 281 281 DT FULLY DUMMY 438 488 468 518 512 562 562 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 25

Mortise Locksets DRAKE PLATE DESIGN DR ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Concealed 6 pin Cylinder Option A12 Standard Features Thru-bolted screwless knob/lever plate Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 11" H x 2-1/2" W, Int: 11" H x 2-1/2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3, 26D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 10, 10B, 32, 32D 10E, 10B, 3E, 26D 3E, 26D 10E, 10B, 26 32, 32D 32, 32D 491 541 521 571 565 615 615 504 554 534 584 578 628 628 532 582 562 612 606 656 656 N PASSAGE F01 403 453 433 483 477 527 527 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE KNOBS 10, 20 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 504 554 534 584 578 628 628 219 244 234 259 256 281 281 DT FULLY DUMMY 438 488 468 518 512 562 562 82, 83, 86, 92, 96 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 26

HOW TO ORDER DRAKE DR PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! DR KNOB DESIGN 10 20 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3 3E 10 10B 10E 26 26D 32 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 5 DR 10 A / 32D 2-3/4" backset Grade 1, UL Listed Mortise Lock Body Drake Plate Ball Knob Entrance Function Satin Stainless Steel Finish G3 Less Cylinder QUANTITY DR / 27

Mortise Locksets GREAT BARRIER PLATE DESIGN GB Exterior Operational 82 Plaza Lever Exterior Rigid 82 Plaza Lever Exterior Push Plate 28

GREAT BARRIER PLATE DESIGN GB ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features LEVERS Screwless, stainless steel lever plate assemblies with brass machined lever bearing and hardened steel track guide both sides Screwless forged plaza lever 4-1/2" long fastened with hardened retainer rings Independent spring loaded captivated spindles 82 Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10-1/8" H x 7-1/2" W, Int: 10-1/8" H x 7-1/2" W Cylinder: MARKS 1-1/8" long, 6 pin solid brass w/spacing collar concealed under exterior plate, 2 keys. MARKS # FUNCTION ANSI # 32D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 EX EXIT F31 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 701 985 714 714 742 742 Levers 29

Mortise Locksets HERITAGE PLATE DESIGN HR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 30

HERITAGE PLATE DESIGN HR ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10" H x 2-3/4" W, Int: 10" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 604 634 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 888 918 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 617 647 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 617 647 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 645 675 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 645 675 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 516 546 L BATHROOM F02 LF PRIVACY F19 617 647 LJ PRIVACY F22 EX EXIT F31 563 593 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 31

Mortise Locksets HERITAGE PLATE DESIGN HR ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 10" H x 2" W, Int: 10" H x 2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 574 604 587 617 615 645 N PASSAGE F01 486 516 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 587 617 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 32

HOW TO ORDER HERITAGE HR PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! HR KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 7 HR 62 A / 3E 2-3/4" backset Grade 2 Mortise Lock Body Heritage Plate Royale Lever Entrance Function Polished Brass PVD Finish D2 2-1/4" Door Thickness QUANTITY HR / 33

Mortise Locksets KENSINGTON PLATE DESIGN KE Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 34

KENSINGTON PLATE DESIGN KE ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles 42, 52, 57, 62, Reversible mortise lock 2-1/2" or 2-3/4" backset 30, 60 72, 77, 78, 82, Lever support springs Lock front: 1-1/4" x 8" 83, 86, 92, 96 Dimensions: Ext: 10-3/4" H x 2-1/2" W, Int: 10-3/4" H x 2-1/2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 521 551 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 805 835 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 534 564 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 534 564 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 562 592 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 562 592 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 433 463 L BATHROOM F02 LF PRIVACY F19 534 564 LJ PRIVACY F22 EX EXIT F31 480 510 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 219 249 DT FULLY DUMMY 438 468 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 35

Mortise Locksets KENSINGTON PLATE DESIGN KE ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 10-3/4' H x 2-1/2" W, Int: 10-3/4" H x 2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 491 521 504 534 532 562 N PASSAGE F01 403 433 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 504 534 219 249 DT FULLY DUMMY 438 468 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 36

HOW TO ORDER KENSINGTON KE PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! KE KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 9 KE 72 A / 3E 2-1/2" backset Grade 2 Mortise Lock Body Kensington Plate Towne Lever Entrance Function Polished Brass "PVD" Finish G1 IC Core Housing QUANTITY KE / 37

Mortise Locksets MADISON PLATE DESIGN MA Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 38

MADISON PLATE DESIGN MA ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10-1/2" H x 2-5/32" W, Int: 10-1/2" H x 2-5/32" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL EU ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC DORMITORY F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESS 604 634 888 918 617 647 617 647 645 675 645 675 N PASSAGE F01 516 546 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 617 647 563 593 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 39

Mortise Locksets MADISON PLATE DESIGN MA ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 10-1/2" H x 2-5/32" W, Int: 10-1/2" H x 2-5/32" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 574 604 587 617 615 645 N PASSAGE F01 486 516 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 587 617 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 40

HOW TO ORDER MADISON MA PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! MA KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 7 MA 62 A / 3E 2-1/2" backset Grade 2 Mortise Lock Body Madison Plate Royale Lever Entrance Function Polished Brass PVD Finish D2 2-1/4" Door Thickness QUANTITY MA / 41

Mortise Locksets NEWPORT PLATE DESIGN NE Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 42

NEWPORT PLATE DESIGN NE ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL EU ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA INTRUDER F11 FX DORMITORY F33 KEYLESS 604 634 888 918 617 647 617 647 645 675 645 675 N PASSAGE F01 516 546 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31 DUMMY TRIM DI DO Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10" H x 2-15/16" W, Int: 10" H x 2-15/16" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 617 647 563 593 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 43

Mortise Locksets NEWPORT PLATE DESIGN NE ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset 42, 52, 57, 62, Lever support springs 30, 60 72, 77, 78, 82, Lock front Series 7: 1-1/4" x 8", Series 9: 1-1/16" x 7-5/8" 83, 86, 92, 96 Dimensions: Ext: 10" H x 2-15/16" W, Int: 10" H x 2-15/16" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08,F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 574 604 587 617 615 645 N PASSAGE F01 486 516 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 587 617 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 44

HOW TO ORDER NEWPORT NE PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! NE KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 9 NE 72 A / 3E 2-3/4" backset Grade 1, UL listed Mortise Lock Body Newport Plate Towne Lever Entrance Function Polished Brass PVD Finish G1 IC Core Cylinder QUANTITY NE / 45

Mortise Locksets NEW YORKER PLATE DESIGN NY Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 46

NEW YORKER PLATE DESIGN NY ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10" H x 2-3/4" W, Int: 7" H x 2-1/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys * MARKS # FUNCTION ANSI # 3 26D 3 26D 3 26D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 300 330 341 371 374 404 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 584 614 625 655 658 688 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 313 343 354 384 387 417 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 313 343 354 384 387 417 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 341 371 382 412 415 445 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 341 371 382 412 415 445 FA INTRUDER F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 212 242 253 283 286 316 L BATHROOM F02 LF PRIVACY F19 313 343 354 384 387 417 LJ PRIVACY F22 EX EXIT F31 259 289 300 330 333 363 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 109 139 129 159 146 176 DT FULLY DUMMY 217 247 258 288 291 321 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Large interior plate available (Large interior plate: 10" x 2-3/4") * KNOBS 10, 20 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Knobs Levers 47

Mortise Locksets NEW YORKER PLATE DESIGN NY ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7:1-1/4" x 8"; Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 10" H x 2-3/4" W, Int: 7" H x 2-1/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys * MARKS # FUNCTION ANSI # 3 26D 3 26D 3 26D KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 270 300 311 341 344 374 283 313 324 354 357 387 311 341 352 382 385 415 N PASSAGE F01 182 212 223 253 256 286 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 283 313 324 354 357 387 109 139 129 159 146 176 DT FULLY DUMMY 217 247 258 288 291 321 NOTES KNOBS 10, 20 30, 60 Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Large interior plate available (Large interior plate: 10" x 2-3/4") * LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Knobs Levers 48

HOW TO ORDER NEW YORKER NY PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! NY KNOB DESIGN 10 20 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3 26D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 9 NY 10 A / 3 X 2-1/2" backset Grade 2 Mortise Lock Body New Yorker Plate Round Knob Entrance Function Polished Brass Finish 1-1/4" x 8" Face Plate QUANTITY NY / 49

Mortise Locksets ROYALE PLATE DESIGN RY Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 50

ROYALE PLATE DESIGN RY ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL EU ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESS 604 634 888 918 617 647 617 647 645 675 645 675 N PASSAGE F01 516 546 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31 DUMMY TRIM DI DO Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10-1/2" H x 2-1/2" W, Int: 10-1/2" H x 2-1/2" H Dimensions with optional frame plate: Ext: 10-1/2" H x 2-3/4" W, Int: 10-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 617 647 563 593 261 291 DT FULLY DUMMY 521 551 NOTES KNOBS 30, 60 Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Knobs Levers 51

Mortise Locksets ROYALE PLATE DESIGN RY ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 10-1/2" H x 2-1/2" W, Int: 10-1/2" H x 2-1/2" H Dimensions with optional frame plate: Ext: 10-1/2" H x 2-3/4" W, Int: 10-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 574 604 587 617 615 645 N PASSAGE F01 486 516 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 587 617 261 291 DT FULLY DUMMY 521 551 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 52

HOW TO ORDER ROYALE RY PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! RY KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 9 RY 52 DW / 15 X 2-1/2" backset Grade 2 Mortise Lock Body Royale Plate Madison Lever Right Hand Vestibule Function Satin Nickel Finish 1-1/4" x 8" Face Plate QUANTITY RY / 53

Mortise Locksets TOWNE PLATE DESIGN TN Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 54

TOWNE PLATE DESIGN TN ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets MARKS # FUNCTION ANSI # 3E & 15 26 3E & 15 26 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL EU ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT 604 686 636 717 888 970 920 1001 617 699 649 730 617 699 649 730 G APARTMENT F09 GC INTRUDER LATCHBOLT F32 645 727 677 758 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESS 645 727 677 758 N PASSAGE F01 516 598 548 629 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 EX EXIT F31 DUMMY TRIM DI DO Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front: 1-1/4" x 8" Dimensions: Ext: 9-1/4" H x 2-1/4" W, Int: 9-1/4" H x 2-1/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 617 699 649 730 563 645 595 676 261 302 277 317 DT FULLY DUMMY 521 603 553 634 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 55

Mortise Locksets TOWNE PLATE DESIGN TN ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 26 3E & 15 26 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 574 656 606 687 587 669 619 700 615 697 647 728 N PASSAGE F01 486 568 518 599 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO Standard Features Thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 7: 1-1/4" x 8"; Series 9: 1-1/16" x 7-5/8" Dimensions: Ext: 9-1/4" H x 2-1/4" W, Int: 9-1/4" H x 2-1/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 587 669 619 700 261 302 277 317 DT FULLY DUMMY 521 603 553 634 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. Knobs Levers 56

HOW TO ORDER TOWNE TN PLATE DESIGN 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 PLATE DESIGN! TN KNOB DESIGN 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3E 15 26 Special Combo Finishes 3E/15 15/3E Special Example: 3E/15 Plate: 3E Cylinder, Knob, Lever, Turnpiece Frame Plate: 15 OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 5 TN 57 J / 3E 2-3/4" backset Grade 1, UL Listed Mortise Lock Body Towne Plate Monaco Lever Left Hand Classroom Function Polished Brass PVD Finish G3 Less Cylinder QUANTITY TN / 57

Mortise Locksets ROSE DESIGN RR, RW, RS, RQ, RX Roses Rose w/ Ring RR Plain Rose RW Small Rose RS Small Rose w/ Ring RQ Square Rose RX! Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 58

ROSE DESIGN RR, RW, RS, RQ, RX ANSI-A156.13 Grade 1 3 Hour Fire Rating Series 5 2-3/4" Backset Series 55 2-1/2" Backset Mortise Locksets Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever rose assemblies Independent spring loaded captivated spindles 42, 52, 57, 62, 42, 52, 57, 62, 82, 83, 86, Reversible mortise lock 2-1/2" or 2-3/4" bkst. 10, 20 30, 60 72, 77, 78, 82, 72, 77, 78, 82, 92, 96 Lever support springs 83, 86, 92, 96 83, 86, 92, 96 Lock front: 1-1/4" x 8" Cylinder: MARKS C keyway, 6 pin w/ 2 keys MARKS # FUNCTION ANSI # 3, 10, 10B, 26D, 32D 3E, 15, 26 26, 26D 32, 32D 3E, 4, 10E, 10B, 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE E OFFICE F04 EW STOREROOM F07 399 452 443 443 463 J CLASSROOM F05 JM, JR HOSPITAL F06 GL INSTIT. PRIVACY F26 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 683 736 727 727 747 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 406 459 450 450 470 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 426 479 470 470 490 LH SPECIAL PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G APARTMENT F09 GC INTRUDER LATCHBOLT F32 426 479 470 470 490 WW INSTITUTIONAL F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 426 479 470 470 490 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 364 417 408 408 428 L BATHROOM F02 LF PRIVACY F19 390 443 434 434 454 LJ PRIVACY F22 EX EXIT F31 416 469 460 460 480 DUMMY TRIM DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE 77 104 108 108 118 DT FULLY DUMMY 154 207 215 215 235 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. F17 - Dummy Cylinder add $41.00 *! Square Rose RX $27.00 Additional Knobs Levers 59

Mortise Locksets ROSE DESIGN RR, RW, RS, RQ, RX ANSI-A156.13 Grade 2 Series 7 2-3/4" Backset Series 9 2-1/2" Backset MARKS # FUNCTION ANSI # KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FX DORMITORY F33 KEYLESS 3, 10, 10B, 26D, 32D 3E, 15, 26 26, 26D 32, 32D 3E, 4, 10E, 10B, 15 366 419 410 410 430 373 426 417 417 437 393 446 437 437 457 N PASSAGE F01 331 384 375 375 395 L BATHROOM F02 LF PRIVACY F19 DUMMY TRIM DI DO Standard Features KNOBS LEVERS Thru-bolted screwless knob/lever rose assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" bkst. Lever support springs Lock front Series 7: 1-1/4" x 8"; Series 9: 1-1/16" x 7-5/8" Cylinder: MARKS C keyway, 6 pin w/ 2 keys DUMMY TRIM INSIDE DUMMY TRIM OUTSIDE 10, 20 30, 60 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 82, 83, 86, 92, 96 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 357 410 401 401 421 61 87 91 91 101 DT FULLY DUMMY 121 174 182 182 202 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. F17 - Dummy Cylinder add $41.00 *! Square Rose RX $27.00 Additional Knobs Levers 60

HOW TO ORDER ROSE DESIGN RR, RW, RS, RQ, RX 1 2 3 4 5 6 Mortise Locksets Lock Series Plate Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 0 5 55 7 9 ROSE DESIGN RR RW RS RQ RX KNOB DESIGN 10 20 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 93-94) D DW E EW J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX N L LF LJ EX DI DO DT FINISH (Pg 5) 3 3E 4 10 10B 10E 15 26 26D 32 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness QUANTITY How To Order Example 5 RW 92 N / 10B 2-3/4" backset Grade 1, UL Listed Mortise Lock Body Plain Rose American Lever Passage Function Dark Bronze Finish D1 2" Door QUANTITY RW / 61

Mortise Locksets CAMBRIDGE HANDLE SET DESIGN CB Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 17" H x 2-3/4" W, Int: 10-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 62

CAMBRIDGE HANDLE SET DESIGN CB Mortise Locksets GRADE 1 Series 4 2-3/4" Backset Series 45 2-1/2" Backset KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 795 808 836 SO* STOREROOM F25 1088 DUMMY TRIM DT FULLY DUMMY 588 Series 6 2-3/4" Backset KNOBS 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 745 758 786 SO* STOREROOM F25 1038 DUMMY TRIM GRADE 2 Series 8 2-1/2" Backset DT FULLY DUMMY 588 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * HOW TO ORDER CB HANDLE SETS 1 2 3 4 5 6 Lock Series Handle Set Design Interior Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! CB KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 63

Mortise Locksets CENTURY & ORLEANS HANDLE SET DESIGN CN, OR EXTERIOR CENTURY EXTERIOR ORLEANS Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: CENTURY Ext: 17" H x 2-1/4" W, Int: 10-1/2" H x 2-1/4" W Dimensions: ORLEANS Ext: 17" H x 2-1/4" W, Int: 10-1/2" H x 2-1/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 64

CENTURY & ORLEANS HANDLE SET DESIGN CN, OR Mortise Locksets GRADE 1 Series 4 2-3/4" Backset HOW TO ORDER CN, OR HANDLE SETS 1 2 3 4 5 6 Lock Series Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 Handle Set Design 795 808 836 SO* STOREROOM F25 1088 DUMMY TRIM DT FULLY DUMMY 588 NOTES KNOBS 30, 60 Interior Knob/Lever Design LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 745 758 786 SO* STOREROOM F25 1038 DUMMY TRIM Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. SO Function Double Handleset Only Packed * Series 6 2-3/4" Backset GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 588 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN CN OR KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 65

Mortise Locksets CROWN & GRAND CROWN HANDLE SET DESIGN CR, GC EXTERIOR CROWN EXTERIOR GRAND CROWN Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: CROWN Ext: 16" H x 2" W, Int: 8-1/2" H x 2" W Dimensions: GRAND CROWN Ext: 16" H x 2-" W, Int: 8-1/2" H x 2" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 66

CROWN & GRAND CROWN HANDLE SET DESIGN CR, GC Mortise Locksets GRADE 1 Series 4 2-3/4" Backset Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 KNOBS 30, 60 844 857 885 SO* STOREROOM F25 1137 DUMMY TRIM DT FULLY DUMMY 637 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Series 6 2-3/4" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 794 807 835 SO* STOREROOM F25 1087 DUMMY TRIM GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 637 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 NOTES HOW TO ORDER CR, GC HANDLE SETS 1 2 3 4 5 6 Lock Series Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * Handle Set Design Interior Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN CR GC KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 67

Mortise Locksets GEORGETOWN HANDLE SET DESIGN GE Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 18" H x 3-7/32" W, Int: 9-1/4" H x 3-7/32" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 68

GEORGETOWN HANDLE SET DESIGN GE Mortise Locksets GRADE 1 Series 4 2-3/4" Backset HOW TO ORDER GE HANDLE SETS 1 2 3 4 5 6 Lock Series Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 Handle Set Design 955 968 996 SO* STOREROOM F25 1248 DUMMY TRIM DT FULLY DUMMY 748 NOTES KNOBS 30, 60 Interior Knob/Lever Design LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 905 918 946 SO* STOREROOM F25 1198 DUMMY TRIM Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * Series 6 2-3/4" Backset GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 748 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! GE KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 69

Mortise Locksets HERITAGE HANDLE SET DESIGN HR Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 17-5/8" H x 2-3/4" W, Int: 10" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 70

HERITAGE HANDLE SET DESIGN HR Mortise Locksets GRADE 1 Series 4 2-3/4" Backset Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 KNOBS 30, 60 778 791 819 SO* STOREROOM F25 1071 DUMMY TRIM DT FULLY DUMMY 571 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Series 6 2-3/4" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 728 741 769 SO* STOREROOM F25 1021 DUMMY TRIM GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 571 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * HOW TO ORDER HR HANDLE SETS 1 2 3 4 5 6 Lock Series Handle Set Design Interior Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! HR KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 71

Mortise Locksets MADISON & GRAND MADISON HANDLE SET DESIGN MA, GM EXTERIOR MADISON EXTERIOR GRAND MADISON Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: MADISON Ext: 15-1/2" H x 2-5/32" W, Int: 10-1/2" H x 2-5/32" W Dimensions: GRAND MADISON Ext: 17" H x 2-5/32" W, Int: 10-1/2" H x 2-5/32" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 72

MADISON & GRAND MADISON HANDLE SET DESIGN MA, GM Mortise Locksets GRADE 1 Series 4 2-3/4" Backset HOW TO ORDER MA, GM HANDLE SETS 1 2 3 4 5 6 Lock Series Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 Handle Set Design 789 802 830 SO* STOREROOM F25 1082 DUMMY TRIM DT FULLY DUMMY 582 NOTES KNOBS 30, 60 Interior Knob/Lever Design LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 739 752 780 SO* STOREROOM F25 1032 DUMMY TRIM Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. SO Function Double Handleset Only Packed * Series 6 2-3/4" Backset GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 582 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN MA GM KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 73

Mortise Locksets NEWPORT HANDLE SET DESIGN NE Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 17-1/8" H x 2-15/16" W, Int: 10" H x 2-15/16" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 74

NEWPORT HANDLE SET DESIGN NE Mortise Locksets GRADE 1 Series 4 2-3/4" Backset HOW TO ORDER NE HANDLE SETS 1 2 3 4 5 6 Lock Series Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 Handle Set Design 820 833 861 SO* STOREROOM F25 1113 DUMMY TRIM DT FULLY DUMMY 613 NOTES KNOBS 30, 60 Interior Knob/Lever Design LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 770 783 811 SO* STOREROOM F25 1063 DUMMY TRIM Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * Series 6 2-3/4" Backset GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 613 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! NE KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 75

Mortise Locksets PORTLAND HANDLE SET DESIGN PO Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 17" H x 3-11/32" W, Int: 11" H x 3-11/32" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 76

PORTLAND HANDLE SET DESIGN PO Mortise Locksets GRADE 1 Series 4 2-3/4" Backset HOW TO ORDER PO HANDLE SETS 1 2 3 4 5 6 Lock Series Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 Handle Set Design 1014 1027 1055 SO* STOREROOM F25 1307 DUMMY TRIM DT FULLY DUMMY 807 NOTES KNOBS 30, 60 Interior Knob/Lever Design LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. 964 DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 977 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT 1005 AC ENTRANCE F35 C STOREROOM F25 SO* STOREROOM F25 1257 DUMMY TRIM Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * Series 6 2-3/4" Backset GRADE 2 Series 8 2-1/2" Backset KNOBS DT FULLY DUMMY 807 MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 30, 60 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! PO KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 77

Mortise Locksets ROYALE HANDLE SET DESIGN RY EXTERIOR ROYALE EXTERIOR ROYALE WITH OPTIONAL FRAME PLATE F3 Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 17" H x 2-1/2" W, Int: 10-1/2" H x 2-1/2" W Dimensions with Optional Frame Plate: Ext: 17" H x 2-3/4" W, Int: 10-1/2" H x 2-3/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 78

ROYALE HANDLE SET DESIGN RY Mortise Locksets GRADE 1 Series 4 2-3/4" Backset HOW TO ORDER RY HANDLE SETS 1 2 3 4 5 6 Lock Series Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 Handle Set Design 955 968 996 SO* STOREROOM F25 1248 DUMMY TRIM DT FULLY DUMMY 748 NOTES KNOBS 30, 60 Interior Knob/Lever Design LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 905 918 946 SO* STOREROOM F25 1198 DUMMY TRIM Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * Series 6 2-3/4" Backset GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 748 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! RY KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 79

Mortise Locksets TOWNE, GRAND TOWNE & CLAREMONT HANDLE SET DESIGN TN, GT, CT EXTERIOR TOWNE EXTERIOR TOWNE WITH OPTIONAL FRAME PLATE F3 EXTERIOR GRAND TOWNE EXTERIOR CLAREMONT Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: TOWNE Ext: 16-3/8" H x 2-1/4" W, Int: 9-1/4" H x 2-1/4" W Dimensions TOWNE with Optional Frame Plate: Ext: 16-7/8" H x 2-3/4" W, Int: 9-1/4" H x 2-3/4" W Dimensions: GRAND TOWNE Ext: 16-3/4" H x 2-1/4" W, Int: 9-1/4" H x 2-1/4" W Dimensions: CLAREMONT Ext: 16-1/4" H x 2-1/4" W, Int: 9-1/4" H x 2-1/4" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys INTERIOR Optional Frame Plates Also Available for Grand Towne & Claremont Designs Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 80

TOWNE, GRAND TOWNE & CLAREMONT HANDLE SET DESIGN TN, GT, CT Mortise Locksets GRADE 1 Series 4 2-3/4" Backset Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 KNOBS 30, 60 844 857 885 SO* STOREROOM F25 1137 DUMMY TRIM DT FULLY DUMMY 637 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Series 6 2-3/4" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 794 807 835 SO* STOREROOM F25 1087 DUMMY TRIM GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 637 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 NOTES HOW TO ORDER TN, GT, CT HANDLE SETS 1 2 3 4 5 6 Lock Series Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * Handle Set Design Interior Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN TN GT CT KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special See pages 5 & 57 for more information on combination finishes. OPTIONS (Pg 5) Specify Keying Handing Door Thickness 81

Mortise Locksets WHARTON HANDLE SET DESIGN WT Standard Features Exterior handle plate assemblies with thru-posts Interior thru-bolted screwless knob/lever plate assemblies Independent spring loaded captivated spindles Reversible mortise lock 2-1/2" or 2-3/4" backset Lever support springs Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 16-1/4" H x 3" W, Int: 9-1/4" H x 3" W Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR Palace Lever 42 Towne Lever 72 Dayton Lever 83 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 82

WHARTON HANDLE SET DESIGN WT Mortise Locksets GRADE 1 Series 4 2-3/4" Backset Series 45 2-1/2" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VEST. VESTIBULE EW STOREROOM F07 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 G APARTMENT F24 KNOBS 30, 60 869 882 910 SO* STOREROOM F25 1162 DUMMY TRIM DT FULLY DUMMY 662 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 Series 6 2-3/4" Backset MARKS # FUNCTION ANSI # 3E & 15 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VEST. DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F25 819 832 860 SO* STOREROOM F25 1112 DUMMY TRIM GRADE 2 Series 8 2-1/2" Backset KNOBS 30, 60 DT FULLY DUMMY 662 LEVERS 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Packed Special finishes, consult factory. SO Function Double Handleset Only * HOW TO ORDER WT HANDLE SETS 1 2 3 4 5 6 Lock Series Handle Set Design Interior Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! WT KNOB DESIGN 30 60 LEVER DESIGN 42 78 52 82 57 83 62 86 72 92 77 96 MARKS FUNCTION (Pg 93-94) D DW EW A B F AC C G SO DT FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 83

Mortise Locksets GEORGIAN HANDLE SET DESIGN 600 Standard Features Exterior: Solid brass handle assembly with matching cylinder collar Interior: Round knob with 2 set screws 2-1/4" diameter Two piece hook spindle. Rose: 2-9/16" diameter Turnpiece on round plate Finish: US 3 Only Lock front Series 4, 45: 1-1/4" x 8" Lock front Series 6: 1-1/4" x 8"; Series 8: 1-1/16" x 7-5/8" Dimensions: Ext: 11-1/4" H Cylinder: MARKS C keyway, 6 pin w/ 2 keys EXTERIOR INTERIOR MARKS # FUNCTION ANSI # SERIES 4, 45 SERIES 6 SERIES 8 ALL SERIES FINISH 3 ONLY DW VESTIBULE A ENTRANCE F08, F10 B ENTRANCE F21 401 353 338 F DORMITORY F12 AC ENTRANCE F35 C STOREROOM F14 434 384 369 FD APARTMENT F20 434 DT FULL DUMMY 238 HOW TO ORDER 600 HANDLE SETS Packed 1 2 3 4 Lock Series Handle Set Design MARKS Function / Finish Number Number Alpha Slash Alpha-Num LOCK SERIES (Pg 88-92) 00 4 45 6 8 HANDLESET DESIGN! 600 MARKS FUNCTION (Pg 93-94) DW A B F AC C FD DT FINISH (Pg 5) 3 Specify Keying Handing Door Thickness 84

ORNAMENTAL IRON Series 21 Unilock Series 22 Ornamental Iron F & FW function single cylinder only F & FW function single cylinder only Series 9215 Unilock Series 9225 F & FW function single cylinder only F & FW function single cylinder only Standard Features Door thickness: 1" Series 9 lock body, Backset: 2-1/2" Reversible mortise lock 1" bolt, 1/2" latch projection Lock front: 1" x 7-1/8" Thru-bolted solid brass trim assemblies Spring loaded captivated spindles Cylinder: Marks A keyway, 5 pin w/ 2 keys; keyed alike - 6 SERIES 21 UNILOCK SERIES 9215 UNILOCK SERIES 22 SERIES 9225 MARKS # FUNCTION ANSI # 3 5, 26D 3 5, 26D KEYED SINGLE CYLINDER, WITH DEADBOLT F SINGLE CYL. PANIC PROOF F12 FW SINGLE CYL. PANIC PROOF F13 210 225 285 300 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE 185 200 260 275 DUMMY TRIM DT FULL DUMMY 120 130 200 210 OPTIONS Packed CODE PRICE Lock Front: 1" x 7-1/8" standard W NC Mushroom knob interior; 1-7/8" prj. A9 4 For 1-3/4" doors D4 NC Adjustable spring collars F10 4 85

ORNAMENTAL IRON SLIMLINE Series 2550 for 2" doors THINLINE Series 2750 for 1" doors Ornamental Iron Standard Features Thru-bolted solid brass trim assemblies Spring loaded captivated spindles Reversible mortise lock 1" backset 1" bolt, 1/2" latch projection Cylinder: Marks A keyway, 5 pin w/ 2 keys; keyed alike - 6 SERIES 2550 2750 MARKS # FUNCTION 3 3 5, 26D KEYED WITH DEADBOLT B ENTRANCE CYLINDER x TURNPIECE 165 165 185 C ENTRANCE DOUBLE CYLINDER 165 165 185 DUMMY TRIM DT FULL DUMMY 100 100 115 OPTIONS CODE PRICE For 1-3/4" doors D4 NC Marks C keyway G5 13 Packed HOW TO ORDER ORNAMENTAL IRON LOCK SETS 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES (Pg 85) 21 9225 22 2550 9215 2750 MARKS FUNCTION (Pg 93-94) B C F FW AC DT FINISH (Pg 5) 3 5 26D OPTIONS Special Specify Keying Handing Door Thickness 86

ORNAMENTAL IRON Knob & Lever Kits K21 AC K21 F K2550/ K2750 K9215 AC K9215 F K22 K9225 PART # DESCRIPTION FUNCTION 3 4 5, 26D K21AC EXT./INT. UNI-LOCK KNOB/PLATE KIT AC 97 108 K21AC-M EXT./INT. UNI-LOCK KNOB/PLATE KIT (Mushroom Int.) AC 103 112 K21F EXT./INT. UNI-LOCK KNOB/PLATE KIT ASSEMBLIES F 116 122 K21F-M EXT./INT. UNI-LOCK KNOB/PLATE KIT (Mushroom Int.) F 120 126 K2750 LEVER PLATE TRIM SET 116 132 2600B THINLINE LOCK BODY, LATCH, DEADBOLT US 4 & 26D ONLY STRIKE NOT INCLUDED 106 117 K2550 LEVER PLATE TRIM SET 87 92 K9215AC EXT./INT. UNI-LOCK LEVER/PLATE KIT ASSEMBLIES AC 147 156 K9215F EXT./INT. UNI-LOCK LEVER/PLATE KIT ASSEMBLIES F 147 172 A9214-M UNI-LOCK MUSHROOM KNOB/PLATE (w/cylinder hole) AC 54 57 K9217-M UNI-LOCK MUSHROOM KNOB/PLATE (w/turnpiece) F 95 97 K22 EXT./INT. KNOB/ROSE KIT 1" THRU 1-3/4" DOOR 57 68 K22-M EXT./INT. KNOB/ROSE KIT (Mushroom Int.) 62 73 K9225 EXT./INT. LEVER/ROSE KIT 143 150 Ornamental Iron Accessories K9117 9273 9275 A9276 2635 2638 9277 PART # DESCRIPTION NO FINISH 3 5, 26D K9117 TURNPIECE KIT 38 41 A9223-M INTERIOR KNOB/ROSE ASSEMBLY (Mushroom Knob) 31 38 9273 SPRING COLLAR, 7/16" HIGH 8 8 9275 MORTISE SPACER, WROUGHT BRASS, 1/8" HIGH 3 A9276 COLLAR, WROUGHT BRASS W/INSERT, 1/2" HIGH 15 15 9277 PLASTIC SPACER RING, 1/16" 1 2635 CURVED LIP STRIKE, SOLID BRASS 19 11 2638 FLAT STRIKE, SOLID BRASS, NO LIP 11 4 Cylinders 2122 2621 PART # DESCRIPTION 3 5, 26D 2122 5 PIN MORTISE CYLINDER 30 34 2621 CYLINDER x TURNPIECE UNIT, A KEYWAY 53 59 2622 2622 DOUBLE CYLINDER UNIT 39 47 87

MORTISE LOCK BODIES NOVA SERIES GRADE 1 MORTISE LOCKS EXCEEDS SPECIFICATIONS Grade 1 for Handle Sets Series 4 2-3/4" Backset Series 45 2-1/2" Backset Mortise Parts, Trim Series 4 Standard Features Series 45 Backset: 4 Series 2-3/4"; 45 Series 2-1/2" Bolt throw: Stainless steel full 1" throw Latch throw: 3/4" (anti-friction) Auxiliary latch: 1/2" throw Case: Stamped steel.090 thick., Zinc dichromate finish Front: 1-1/4" x 8" Adjustable bevel Hubs: Steel, 9/32" on diamond 5/16" on square Series 4 Series 45 MARKS # FUNCTION ANSI # 3, 32D KEYED SINGLE CYLINDER, NO DEADBOLT DW VESTIBULE EW STOREROOM F07 EN STOREROOM DN STOREROOM SERIES 4 & 45 Packed 10, 10B, 32 259 270 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 271 287 F DORMITORY F12 FD APARTMENT F20 286 301 KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 286 301 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STORE DOOR B BODY F25 286 301 SO STORE DOOR* F25 * SERIES 45 NOT AVAILABLE IN THIS FUNCTION OPTIONS CODE PRICE Fronts: 1-1/16" x 7-5/8" T 21 1" x 7-3/4" V 21 1" x 8" Z 21 Lever support springs w- 5/16" hubs B4 17 Turnpiece hub on square B8 9 Solid latch for electric strike E1 17 Hold open latch E2 32 Lead-lined mortise lock F1 246 CYLINDER CAMS REQUIRED Locks w/o deadbolt 2101 Straight Cam Locks w/ deadbolt 2102 Cloverleaf Cam 88

MORTISE LOCK BODIES NOVA SERIES GRADE 1 MORTISE LOCKS EXCEEDS SPECIFICATIONS Grade 1 for Knobs & Levers Series 5 2-3/4" Backset Series 55 2-1/2" Backset Series 5 Series 55 Standard Features Backset: 5 Series 2-3/4"; 55 Series 2-1/2" Bolt throw: Stainless steel full 1" throw Latch throw: 3/4" (anti-friction) Auxiliary latch: 1/2" throw Case: Stamped steel.090 thick., Zinc dichromate finish Front: 1-1/4" x 8", Adjustable bevel Hubs: Steel, 9/32" on diamond 5/16" on square w/security separator OPTIONS Series 5 Series 55 CODE PRICE Fronts: 1-1/16" x 7-5/8" T 21 1" x 7-3/4" V 21 1" x 8" Z 21 Lever override guard outside (Series 5) B1 41 Lever override guard both sides B2 57 Lever support springs w-5/16" hubs B4 17 Hubs with hollow spacer (Series 55) B6 17 Turnpiece hub on square B8 9 Solid latch for electric strike E1 17 Hold open latch E2 32 Lead-lined mortise lock F1 246 Request to exit switch (Series 5) W10 119 CYLINDER CAMS REQUIRED Locks w/o deadbolt 2101 Straight Cam Locks w/deadbolt 2102 Cloverleaf Cam G function (exterior only) 2103 G Cam G function (interior only) 2105 J Cam J function 2105 J Cam Electrified Functions: 5 SERIES ONLY 100% Duty Cycle 24v AC/DC, supplied with bridge rectifier (350 ma) SERIES 5 & 55 MARKS # FUNCTION ANSI # 3, 32D 10, 10B, 32 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE / VESTIBULE DW VESTIBULE E OFFICE F04 EW STOREROOM F07 J CLASSROOM F05 JM, JR HOSPITAL (HOLDBACK) F06 GL INST. PRIVACY F26 220 237 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 663 679 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 230 246 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 259 275 LH SPEC. PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 GC INTRUDER LATCHBOLT F32 259 275 WW INSTITUTION F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 259 275 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 170 185 L BATHROOM F02 LF PRIVACY F19 LJ PRIVACY F22 245 261 EX EXIT F31 Packed Mortise Parts, Trim 89

MORTISE LOCK BODIES Grade 2 for Handle Sets Series 6 2-3/4" Backset Series 8 2-1/2" Backset Mortise Parts, Trim Series 6 Standard Features Backset: 2-3/4" Bolt throw: Cast alloy full 1" throw Latch throw: 5/8" (anti-friction) Case: High pressure cast Zamac, baked enamel finish Front: 1-1/4" x 8", Flat or 3 bevel Hubs: 9/32" (7.2mm) on square forged brass Series 6 MARKS # FUNCTION ANSI # 3, 26D, 32D KEYED SINGLE CYLINDER, NO DEADBOLT SERIES 6 & 8 10, 10B, 32 DW VESTIBULE 205 221 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 220 237 F DORMITORY F12 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STORE DOOR B BODY F25 238 254 SO STORE DOOR F25 238 270 Packed Series 8 Standard Features Backset: 2-1/2" Bolt throw: Cast alloy full 1" throw Latch throw: Solid brass 1/2" throw, reversible Case: High pressure cast Zamac, baked enamel finish Front: 1-1/16" x 7-5/8", Flat or 3 bevel Hubs: 9/32" on square forged brass Series 8 OPTIONS Fronts: CODE PRICE 1-1/16" x 7-5/8" T 21 1-1/4" x 10", A function only no mounting holes, (US 4 only) U 91 1" x 7-5/8" V 21 1" x 7-1/8", (US 4 only) W NC 1-1/4" x 8" X 21 1-1/4" x 8-5/8" (A function only US 4) Y 91 1" x 8" Z 21 Solid latch for electric strike E1 17 CYLINDER CAMS REQUIRED All Functions 2101 Straight Cam 90 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES MARKS FUNCTION FINISH OPTIONS (Pg 93-94) (Pg 5) (Pg 5) 4 6 45 7 5 8 55 9 D DW EN DN E EW HOW TO ORDER MORTISE LOCK BODIES EX J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX SO N L LF LJ 3 10 10B 26D 32 32D Special Specify Keying Handing Door Thickness

MORTISE LOCK BODIES Grade 2 for Knobs & Levers Series 7 2-3/4" Backset Series 9 2-1/2" Backset Series 7 Series 9 Standard Features Backset: 2-3/4" Bolt throw: Cast alloy full 1" throw Latch throw: 5/8" (anti-friction) Case: High pressure cast Zamac, baked enamel finish Front: 1-1/4" x 8", Flat or 3 bevel Hubs: 9/32" on square forged brass w/ security separator Standard Features Backset: 2-1/2" Bolt throw: Cast alloy full 1" throw Latch throw: Solid brass 1/2" throw, reversible Case: High pressure cast Zamac, baked enamel finish Front: 1-1/16" x 7-5/8", Flat or 3 bevel Hubs: 9/32" on square forged brass w/ security separator D DW EN DN E EW EX J JM JR GL EL EU A B F FS FW FD H LH G GC WW AC C FC FA FX SO SERIES 7 & 9 MARKS # FUNCTION ANSI # 3, 10, 10B, 32D 32 KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE / VESTIBULE 172 188 DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 188 204 FS DORMITORY FW DORMITORY F13 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 205 221 FX DORMITORY F33 KEYLESS N PASSAGE F01 156 172 C STOREROOM F14 FA DORMITORY F11 L BATHROOM F02 LF PRIVACY F19 CYLINDER CAMS REQUIRED All functions 2101 Straight Cam N L LF LJ 205 221 Packed 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES 4 6 45 7 5 8 55 9 Series 7 Series 9 MARKS FUNCTION (Pg 93-94) CODE PRICE Fronts: 1-1/16" x 7-5/8" T 21 1-1/4" x 10", A function only no mounting holes, (US 4 only) U 91 1" x 7-5/8" V 21 1" x 7-1/8", (US 4 only) W NC 1-1/4" x 8", (9 Series) X 21 1-1/4" x 8-5/8" (A function only US 4) Y 91 1" x 8" Z 21 Solid latch for electric strike E1 17 HOW TO ORDER MORTISE LOCK BODIES FINISH (Pg 5) 3 10 10B 26D 32 91 OPTIONS 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness Mortise Parts, Trim

Mortise Parts, Trim MORTISE DEADLOCKS Series 31 3" Standard Features Backset: Series 31: 2-3/4" Bolt throw: 1" stainless steel with hardened roll pins Case: Stamped Steel Front: 1-1/16" x 4-5/8" adjustable bevel Cylinder: Solid brass cylinder, 6-pin, C keyway, 2 keys Strike: #4035 Included OPTIONS CODE PRICE Security Strike: 4-7/8" x 1-1/4" S4 9 Series 31 2-3/4" Backset Series 2 2-1/2" Backset Series 3 2-3/4" Backset Series 5 2-3/4" Backset Series 55 2-1/2" Backset SERIES 31 FUNCTION MARKS # ANSI # 3, 3E, 10, 10B, 26D 26, 32, 32D LOCK ONLY 129 145 K CYLINDER x TURNPIECE E06071 171 187 L COMMUNICATING SINGLE CYL. E06081 153 170 M DOUBLE CYLINDER E06061 178 194 S CLASSROOM (Specify Handing) E06091 194 210 X TURNPIECE ONLY 136 151 Packed Series 2 Series 3 Standard Features Backset: Series 2: 2-1/2"; Series 3: 2-3/4" Bolt throw: 1" Case: High pressure cast Front: 1-1/16" x 4-5/8" flat or 3 bevel Cylinder: Solid brass cylinder, 6-pin, C keyway, 2 keys Strike: #4035 Included OPTIONS CODE PRICE Front: 1-1/16" x 5-5/8" R 25 MARKS # FUNCTION ANSI # SERIES 2 & 3 3, 26D 3E, 10, 10B, 26, 32, 32D LOCK ONLY 91 107 K CYLINDER x TURNPIECE E06072 132 147 L COMMUNICATING SINGLE CYL. E06082 116 132 M DOUBLE CYLINDER E06062 140 156 S CLASSROOM (Specify Handing) E06092 156 172 X TURNPIECE ONLY 97 113 Packed Series 5 Series 55 Standard Features Backset: Series 5: 2-3/4" Series 55: 2-1/2" Bolt throw: Stainless steel full 1" throw Case: Stamped steel.090 thick, Zinc dichromate finish Front: 1-1/4" x 8" Adjustable bevel OPTIONS CODE PRICE Fronts: 1-1/16" x 7-5/8" T 21 1" x 7-5/8" V 21 1" x 8" Z 21 Lead lined mortise lock F1 246 MARKS # FUNCTION ANSI # SERIES 5 & 55 3, 32D 3E, 10, 10B, 32 T DOUBLE CYLINDER F16 259 270 P CYLINDER x TURNPIECE F17 238 254 S SINGLE CYLINDER* F18 220 237 SC CLASSROOM* F29 254 270 * Packed HOW TO ORDER MORTISE / DEADBOLT LOCK BODIES 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES 31 5 2 55 3 K L M MARKS FUNCTION (Pg 93-94) S X T P SC S FINISH (Pg 5) 3 10B 32 3E 26 32D 10 26D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 92

MORTISE LOCKSETS ANSI # TYPE MARKS FUNCTION ANSI # TYPE MARKS FUNCTION F01...... Non-Keyed........... N F02...... Non-Keyed........... L F04...... Single Cylinder........ E F05...... Single Cylinder........ J F06...... Single Cylinder...... JM F06...... Single Cylinder....... JR F07...... Single Cylinder...... EW F08...... Single Cylinder........ A F09...... Double Cylinder....... G F10...... Single Cylinder........ A F11...... Double Cylinder...... FA F12...... Single Cylinder........ F F13...... Single Cylinder...... FW F14...... Double Cylinder....... C F15...... Single Cylinder....... H F16...... Deadbolt............. T F17...... Deadbolt............ P Single Cylinder Functions ANSI 156.1 ANSI # F04: OFFICE Latch by lever either side except when outside lever locked by stop button in front; then by key outside. Auxiliary latch deadlocks latch. Inside always open. F05: CLASSROOM Latch by lever either side except when outside lever locked by key. When locked, latch bolt retracted by key. Inside always open. Auxiliary latch deadlocks latch. F06: HOLDBACK A Latch by lever either side except when outside lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside lever unlocks outside lever. Latch bolt can be locked in retracted position by locking inside hub. Can be used with blank outside trim. F06: HOLDBACK B Latch by lever either side except when outside lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside lever will not unlock outside lever. Latch bolt can be locked in retracted position by locking outside hub. Can not be used with blank outside trim F07: STOREROOM Latch by lever inside, key outside. Outside lever always rigid. Auxiliary latch deadlocks latch. Inside always open. F08, F10: ENTRANCE Latch by lever either side except when outside locked by stopbutton; then by key outside, lever inside. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch. F12: DORMITORY Latch by lever either side except when outside lever locked by stopbutton or projected deadbolt. Deadbolt by turnpiece inside. Inside lever retracts latch and deadbolt simultaneously, leaving outside locked. Deadbolt deadlocks latch. F13: DORMITORY Latch by lever either side except when projected deadbolt locks outside lever and deadlocks latch. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. Inside lever retracts latch and deadbolt simultaneously, automatically unlocking outside lever. F15: HOTEL Inside lever always free, outside rigid. Latch by lever inside, key outside. (When deadbolt projected by turnpiece all keys are shut out except emergency key). Inside lever retracts deadbolt and latch simultaneously. Auxiliary latch or F18...... Deadbolt............ S F19...... Non-Keyed.......... LF F20...... Single Cylinder...... FD F21...... Single Cylinder........ B F22...... Non-Keyed.......... LJ F24...... Double Cylinder....... G F25...... Double Cylinder....... C F25...... Double Cylinder..... SO F26...... Single Cylinder...... GL F29...... Deadbolt........... SC F30...... Double Cylinder..... WW F31...... Non-Keyed......... EX F32...... Double Cylinder..... GC F33...... Double Cylinder...... FX F34...... Double Cylinder...... FC F35...... Double Cylinder...... AC MARKS FUNCTION Strike I/S O/S 5036 5036 5036 5036 5036 9035 9035 9035 E J JM JR EW A F FW F20: APARTMENT Latch by lever either side except when outside locked by stop button or projected deadbolt. Latch deadlocked by auxiliary latch or deadbolt. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. Inside lever retracts latch & deadbolt simultaneously, leaving outside locked. F21: ENTRANCE Latch by lever either side. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch. F26: INSTITUTIONAL PRIVACY Latch by lever either side except when outside lever locked by inside thumbturn. Latch deadlocked by auxiliary latch. Key outside opens latch. When outside locked, inside lever retracts latch, automatically unlocking outside lever. OFFICE VESTIBULE: Latch by lever either side except when outside lever locked by stopbutton in front; then by key outside. VESTIBULE: Latch by lever inside, key outside. Outside lever always rigid. DORMITORY: Latch by lever inside. Outside lever always rigid. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. When deadbolt is projected, latch is deadlocked. Inside lever retracts latch and deadbolt simultaneously. SPECIAL PRIVACY: Inside lever always free, outside rigid. Latch by lever inside, key outside. Deadbolt by turnpiece inside, emergency release outside. Inside lever retracts deadbolt and latch simultaneously. Auxiliary latch deadlocks latch. STOREROOM: Latch by thumbpiece inside. Key outside. STOREROOM: Latch by thumbpiece or lever inside. Key outside. Auxiliary latch deadlocks latch. ELECTRICALLY LOCKED: Outside always locked electrically. Open by key outside, switch or loss of power. Auxiliary latch deadlocks latch. Inside always open. ELECTRICALLY UNLOCKED: Outside always locked until unlocked by key or electrically energized. Auxiliary latch deadlocks latch. Inside always open. 5035 H deadbolt deadlocks latch. Indicator available. 93 ANSI # MARKS FUNCTION Strike I/S O/S 5035 9035 5036 9035 9035 9035 5035 9035 5036 Electrified Functions ANSI 156.13 5036 5036 FD B GL D DW FS LH DN EN EL EU Mortise Parts, Trim

Mortise Parts, Trim MORTISE LOCKSETS Double Cylinder Functions ANSI 156.13 ANSI # F09: ENTRANCE Latch by lever either side except when outside lever locked by key inside, then by key outside. Auxiliary latch deadlocks latch. F11: DORMITORY Latch by lever either side except when outside lever locked by stopbutton or projected deadbolt. Deadbolt by key either side. Inside lever retracts latch and deadbolt simultaneously, leaving outside locked. Deadbolt deadlocks latch. F14: STOREROOM Latch by lever either side. Deadbolt by key either side. Deadbolt deadlocks latch. F24: APARTMENT HANDLE Latch by thumbpiece either side except when outside is locked by key inside. When outside is locked, latch retracted by key outside or thumbpiece inside. Auxiliary latch deadlocks latch. F25: STOREROOM B Body Latch by thumbpiece either side. Deadbolt by key either side. F25: STOREROOM Latch by thumbpiece either side except when outside thumbpiece locked by stop-button in front; then by key outside. Deadbolt by key both sides. Deadbolt deadlocks latch. F30: INSTITUTION Both levers rigid. Auxiliary latch deadlocks latch. Latch by key either side. F32: INTRUDER LATCH BOLT Latch by lever either side except when outside lever is locked from inside or outside by key. Latch operated by key from inside or outside. Auxiliary latch, deadlocks latch. Inside always open. F33: DORMITORY Latch by lever either side except when projected deadbolt locks outside lever and deadlocks latch. Deadbolt and latch by key either side. Inside lever retracts latch and deadbolt simultaneously, automatically unlocking outside lever. F34: INTRUDER DEADBOLT Latch by lever either side. Deadbolt by key either side. Inside lever retracts latch and deadbolt simultaneously, automatically unlocking outside lever. Auxiliary latch deadlocks latch. F35: STORE DOOR Latch by lever either side except when outside lever locked by stopbutton in front; then by key outside. Deadbolt by key either side. Deadbolt deadlocks latch. PRIVACY INDICATOR AVAILABLE * 94 MARKS FUNCTION Strike I/S O/S 5036 9035 9035 5036 9035 9035 5036 5036 9035 5035 9035 G FA C G C SO WW GC FX FC AC Non-Keyed Functions ANSI 156.13 ANSI # F01: PASSAGE Latch by lever either side. 9035 F02:BATHROOM Latch by lever either side. * Deadbolt by turnpiece inside. Deadbolt deadlocks latch. To unlock from outside, remove emergency button, insert emergency key in 9035 access hole and turn. Optional coin key assembly available. F19: PRIVACY Latch by lever either side except when projected deadbolt locks * outside lever and deadlocks latch. Deadbolt by turnpiece inside. Inside lever retracts latch and deadbolt simultaneously, automatically unlocking outside lever. To unlock from outside, 9035 remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available. F22: PRIVACY Latch by lever either side except when outside lever is locked * by inside turnpiece. Turning inside lever or closing door unlocks outside lever. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. 9035 Optional coin key assembly available. F31: Exit Latch by lever inside, non-removable blank trim outside. Auxiliary latch, deadlocks latch. F16: DEADLOCK Deadbolt by key either side. F17: DEADLOCK Deadbolt by key outside and turnpiece inside. F18: DEADLOCK Deadbolt by key one side only. F29: DEADLOCK Deadbolt by key outside. Inside turnpiece will retract but will not project deadbolt. E06072: CYLINDER BY TURNPIECE Deadbolt by inside turnpiece or outside key. E06082: COMMUNICATING SINGLE CYLINDER Deadbolt by key from one side only. E06062: DOUBLE CYLINDER Deadbolt by key either side. E06092: CLASSROOM Deadbolt by outside key. Turnpiece will retract but not project deadbolt. TURNPIECE Deadbolt by inside turnpiece. MARKS FUNCTION Strike I/S O/S 5036 Deadbolt Functions ANSI 156.13 9035 9035 9035 9035 Deadlock Functions ANSI 156.13 * N L LF LJ EX T P S SC K L M S X

MORTISE LOCK CYLINDERS Cylinders Mortise Concealed IC Core Cylinder Housings R2181 R662 2120 Small Format IC Core 6 or 7 Pin R2183 Cylinder Cams R4182 RA3182 Schlage format IC Core IC core pricing includes KA, KD or MK keying. * Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. * * * * * PART # DESCRIPTION PINS LENGTH 3, 5, 10, 10B, 26D 15, 26, 32D 3E 2120 Mortise Turnpiece Cyl. 1" 32 2170 Mortise Turnpiece Cyl. 1-1/8" 41 2122 Mortise 5 15/16" 37 39 53 2182 Mortise 6 1-1/8" 41 44 57 2183 Mortise 6 1-1/4" 41 44 57 2193 Concealed 5 15/16" 53 2194 Concealed 6 1-1/8" 57 2197 Mortise 6 1-3/4" 86 89 100 2198 Mortise 6 1-1/2" 68 71 86 662 Rim 6 41 44 R2181 Mortise IC Core Housing 6 1" 41 44 R2182 Mortise IC Core Housing 6 1-1/4" 37 39 R2183 Mortise IC Core Housing 6 or 7 1-3/8" 37 39 R2184 IC Core Cylinder Housing 6 or 7 1-3/4" 86 86 86 R3182 Schlage type IC Core, Uncombinated 6 86 R4182 Schlage type IC Core Housing 1-1/4" 100 R662 Rim IC Core Housing 6 or 7 1-3/8" 42 44 R1182 6 Pin Core, Uncombinated 32 R1183 7 Pin Core, Uncombinated 32 RA1182 6 Pin Core, Combinated 46 RA1183 7 Pin Core, Combinated 46 RA3182 Schlage type IC Core, Combinated 6 100 RC1182 6 Pin Core, Construction Core 33 RC1187 Plastic Core Turn Knob 4 RC3182 Schlage type Construction Core 86 Mortise Parts, Trim 2101 2102 2103 2104 2105 PART # DESCRIPTION USE WITH MORTISE LOCK CODE PRICE 2101 MARKS 1 2 2101-A ARROW/SARGENT A1 2 STRAIGHT CAM 2101-C CORBIN RUSSWIN C1 2 2101-S SCHLAGE S1 2 2102 MARKS 2 2 2102-A ARROW/SARGENT A2 2 CLOVERLEAF CAM 2102-C CORBIN RUSSWIN C2 2 2102-S SCHLAGE S2 2 PART # DESCRIPTION USE WITH MORTISE LOCK CODE PRICE 2103 MARKS 3 2 2103-A ARROW/SARGENT A3 2 G CAM 2103-C CORBIN RUSSWIN C3 2 2103-S SCHLAGE S3 2 2104 ADAMS-RITE CAM MARKS 4 2 2105 MARKS 5 2 2105-A ARROW/SARGENT A5 2 J FUNCTION CAM 2105-C CORBIN RUSSWIN C5 2 2105-S SCHLAGE S5 2 1 2 3 Part Number / Finish - Options Number Slash Alpha-Num Dash Alpha-Num See List Of Cylinders Available HOW TO ORDER MORTISE LOCK CYLINDERS FINISH (Pg 5) 3 10 26 3E 10B 26D 5 15 32D Special Specify Keying Door Thickness Cam and keying information must be included in the option section. 95

Mortise Parts, Trim KEYS & KEYING Keys Can Stamp A Maximum Of 6 Characters On Key. STANDARD KEYWAYS MARKS A MARKS Keys PIN LENGTH ACCEPTS Arrow Kwikset Segal 9 SHOULDER INCREMENTS IC Core Keys PIN TO PIN TO 1st PIN PLUG DISTANCE DIAMETER.015".264".156".504" MARKS C Schlage C.015".231".156".504" Construction Master Keying: The construction master key (CMK) is to be used temporarily while the building is under construction. When construction is completed, the end user defeats the CMK s operation by turning the change key in each cylinder, rather than replace or re-keying the cylinder. Marks USA uses a program which is called the lost ball program. When construction key system is set up, three small ball bearings (construction balls) are placed between the bottom pin and master pin, normally in the last chamber as a temporary master pin. The construction key is usually the same cut as the top master key with the exception of the sixth cut which is two increments higher. The construction master key will work in any cylinder until cylinder is defeated by making one full rotation in the cylinder with the change key. The cylinder plug requires a small diameter pocket drilled on one side of one pin chamber so when rotating the cylinder with the change key the pocket will capture the construction balls. The construction pocket in the plug is smaller than a pin chamber. This prevents any top pins or master pins from entering as the plug rotates. Once the cylinder is defeated, there is no way for the cylinder to be construction keyed again without disassembling it. PART # DESCRIPTION BLANK CUT 2164A MARKS A 5 PIN BRASS 1 3 2164C MARKS C 5 PIN BRASS, NICKEL PLATED 1 3 2184A MARKS A 6 PIN NICKEL SILVER 2 4 2184C MARKS C 6 PIN NICKEL SILVER 2 4 2185C MARKS C 6 PIN LARGE BOW 4 5 R1164 IC CORE 6 OR 7 PIN (SMALL FORMAT) 2 4 R3164 SCHLAGE IC CORE CONTROL KEY 2 4 BEST A thru M keyway. Please specify. IC Core pricing includes KA, KD or MK Keying. PART # DESCRIPTION REGULAR IC CORE KA KEYED ALIKE NC NC KD KEYED DIFFERENT NC NC MK MASTER KEYED 16 NC CMK CONSTRUCTION MASTER KEYED (Includes GMK or MK) 24 GMK GRAND MASTER KEYED 16 8 GGMK GREAT GRAND MASTER KEYED 16 8 GGGMK GREAT GREAT GRAND MASTER KEYED 16 HK HOTEL KEYED (Guest, Maid, Emergency) 21 KEYING TO A SPECIFIC CODE NUMBER 10 10 STAMPING LETTERS / NUMBERS ON KEY $5 PER KEY US PROPERTY - DO NOT DUPLICATE $5 PER KEY VISUAL KEY CONTROL (VKC) 10.00 CONCEAL KEY CONTROL 10.00 EXTRA CUT KEYS WITH LOCKSET SEE KEYS ABOVE LARGE BOW KEY $5 PER KEY KEY BITTING CODE LIST 190 IC CORE PRICING INCLUDES KA, KD OR MK KEYING Cylindrical Cylinder Secondary Method: Permanent Master Key Voids CMK Operation Thumbturn Concealed Cylinder Mortise Cylinder Length * Small Format IC Core 6 or 7 pin Schlage format IC core cylinder Rim Cylinder Housing Removable Core Housing Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. 96

MORTISE LOCK PARTS Knob / Rose Kits KRW10 KRS20 ROSE WITH RING PLAIN ROSE SMALL ROSE WITH RING SMALL ROSE DESCRIPTION KRR10 KRW10 KRQ10 KRS10 Round knob/ball assembly KRR20 KRW20 KRQ20 KRS20 Ball knob/ball assembly 3 3E 10, 10B 15 26 32D 147 163 147 KRR30 KRQ60 Lever / Rose Kits K-TEMP KRR30 KRW30 KRQ30 KRS30 Ball knob/ball assembly 163 213 213 KRR60 KRW60 KRQ60 KRS60 Eclipse knob/ball assembly K-TEMP Temporary Trim 49 (no finish) K-TEMP-G3 Temporary Trim less cylinder 37 (no finish) Complete knob/rose assemblies both sides (includes spindles). Mortise Parts, Trim KRR42 KRQ62 KRW78 KRW92 KRW52* KRW72 KRS82 KRW83* KRR57* KRW77 KRW86 KRW96 * Specify handing PART # DESCRIPTION 3E 4 10, 10B, 26 15 26D 32D ROSE WITH RING RR SMALL ROSE WITH RING RQ Complete lever/rose assemblies both sides (includes spindles). KRR42 KRQ42 Palace lever/rose kit 163 246 246 246 246 KRR57 KRQ57 Monaco lever/rose kit 163 246 246 246 KRR62 KRQ62 Royale lever/rose kit 163 246 246 246 PLAIN ROSE RW SMALL ROSE RS Complete lever/rose assemblies both sides (includes spindles). KRW52 KRS52 Madison lever/rose kit 246 246 246 116 KRW72 KRS72 Towne lever/rose kit 246 246 278 246 278 KRW77 KRS77 Maxwell lever/rose kit 246 246 278 246 278 262 KRW78 KRS78 Omni lever/rose kit 246 246 278 246 278 262 KRW82 KRS82 Plaza lever/rose kit 246 246 278 246 278 262 KRW83 KRS83 Dayton lever/rose kit 246 246 278 246 278 262 KRW86 KRS86 Crescent lever/rose kit 246 246 278 246 278 KRW92 KRS92 American lever/rose kit 246 246 278 246 278 262 KRW96 KRS96 Titan lever/rose kit 246 246 278 246 278 262 97

MORTISE LOCK PARTS Dummy Cylinder, Collars & Turnpieces Mortise Parts, Trim 1604 9277 A1605 A9624 Strikes 9038 * NO LIP 4035 3135 9271 9279 For extended lip consult factory. DUST BOX 9036 Spindles A7615 ONLY 32D A9119 9273 8511 DUST BOX 4036 5036 C S8516 S8519 9275 A9615 CURVED LIP STRAIGHT LIP A9276 5036M 5035M 9035M PART # 5035 9035 9035-1.5 DESCRIPTION TYPE PART # A B C D No Lip Curved Lip Straight Lip 3E 3, 26D S3 3, 10, 10B, 32, 32D 4035 1-1/8" 3-1/8" 3 10 9038 1-1/8" 4-7/8" 4 3135 1-1/4" 4-7/8" 15 5035 1-1/4" 4-7/8" 1-1/4" 4-1/8" 17 5036 1-1/4" 4-7/8" 1-1/4" 4-1/8" 17 9035 1-1/4" 4-7/8" 1-1/4" 4-1/8" 4 17 9035-1.5 1-1/4" 4-7/8" 1-1/2" 4-1/8" 26 5035M 1-1/4" 4-7/8" 7/8" 4-1/8" 19 5036M 1-1/4" 4-7/8" 7/8" 4-1/8" 19 9035M 1-1/4" 4-7/8" 7/8" 4-1/8" 19 Dust 9036 Dust box for 9038 strike, plastic 4 Box 4036 Dust box for 4035 strike, plastic 2 For extended lip consult factory. * Extended lip strikes over 1-1/2", Consult factory. 1-3/4" - 2" Add $10 * 10, 4 10B, 26 32 32D 1604 Emergency hole cover 4 9271 Tapered collar, solid brass, 5/16" high 22 17 17 19 17 9273 Spring collar, 7/16" high 8 9275 Mortise spacer, wrought brass, 1/8" high 3 9277 Plastic spacer ring, 1/16" 1 9279 Tapered collar, wrought brass, 3/8" high 15 10 15 12 10 8511 Madison cylinder collar 82 S8516 Dummy cylinder, inside 29 29 29 S8519 Dummy cylinder, outside 29 29 29 A1605 Emergency Coin Key 49 44 44 44 A7615 Occupancy Indicator 37 A9276 Collar, wrought brass w/insert, 1/2" high 15 20 20 20 A9624 Hotel indicator plate ass y for rose trim 64 46 51 A9119 Occupancy indicator plate ass y for rose trim 73 A9615 Turnpiece 45 32 45 39 39 9287 9289 PART # DESCRIPTION PRICE 9287 2-1/2" LONG, HOOK SPINDLE, 2 PIECE 8 9289 4-3/4" LONG, SWIVEL SPINDLE 8 A5613 SPINDLE/SPRING ASSEMBLY FOR LEVERS, 5/16", 1-5/8" L 8 A5685-BE CAM/SPINDLE SPRING ASSEMBLY EXTERIOR 17 A5684-BE CAM/SPINDLE SPRING ASSEMBLY INTERIOR 17 A5613 A5685-BE A5684-BE 98

TRIM LOCK PARTS PLATE/ROSE DESIGN PLATE 3 3E 10 10B 15 26D 32D PLATE/ROSE DESIGN PLATE 3 3E 10 10B 15 26D 32D BARRIER BA 163 NEW YORKER NY 10" PLATE 32 41 CAMBRIDGE CB CLASSIC CL 116 140 57 57 57 58 66 NEW YORKER NS 7" PLATE ROYALE RY 25 32 156 178 Mortise Parts, Trim CAPITOL CP 92 92 92 83 TOWNE TN 153 178 CROWN CR 116 132 132 116 116 WHARTON WT 167 192 DRAKE DR 141 157 157 141 141 2-9/16" DIA. ROSE W-RING RR 53 78 68 68 59 53 53 HERITAGE HR 156 180 2-9/16" DIA. PLAIN ROSE RW 50 73 66 66 57 50 50 KENSINGTON KE 116 140 2-1/4" DIA. SMALL ROSE RS 50 73 66 66 57 50 50 MADISON MA 153 178 2-1/4" DIA. SMALL ROSE W-RING RQ 62 85 78 78 69 62 62 NEWPORT NE 116 140 2-9/16" SQ. SQUARE ROSE RX 77 100 93 93 84 77 77 Frame Plates Towne 16-7/8" H x 2-3/4" W x 1/8" Thick 9-3/4" H x 2-3/4" W x 1/8" Thick 17-1/4" H x 2-3/4" W x 1/8" Thick Royale 10-3/4" H x 2-3/4" W x 1/8" Thick PART # DESCRIPTION 3E 15 8532FP TOWNE HANDLESET, FRAME PLATE 116 147 9531FP TOWNE KNOBSET, FRAME PLATE 66 97 8522FP ROYALE HANDLESET, FRAME PLATE 116 147 9521FP ROYALE KNOBSET, FRAME PLATE 66 97 8532FP 9531FP 8522FP 9521FP 99

TRIM LOCK PARTS Knob / Lever Design KNOB/LEVER 3 3E 4 10 10B 15 26 26D 32D ROUND KNOB 10 68 83 83 83 83 69 BALL KNOB 20 68 83 83 83 83 69 Mortise Parts, Trim BALL KNOB 30 116 146 146 ECLIPSE KNOB 60 116 146 146 PALACE LEVER 42 140 140 155 155 140 155 140 MADISON LEVER 52 116 140 140 155 155 140 155 140 MONACO LEVER 57 140 140 155 155 140 155 140 ROYALE LEVER 62 140 140 155 155 140 155 140 TOWNE LEVER 72 116 140 140 155 155 140 155 140 137 MAXWELL LEVER 77 116 140 140 155 155 140 155 140 137 OMNI LEVER 78 116 140 140 155 155 140 155 140 137 PLAZA LEVER 82 116 140 140 155 155 140 155 140 137 DAYTON LEVER 83 116 140 140 155 155 140 155 140 137 CRESCENT LEVER 86 116 140 140 155 155 140 155 140 137 AMERICAN LEVER 92 116 140 140 155 155 140 155 140 137 TITAN LEVER 96 116 140 140 155 155 140 155 140 137 Handle Design CB11-29 Cambridge 17" x 2-3/4" x 1/8" CN11-19 Century 17" x 2-1/4" x 1/8" CT11-19 Claremont 16-1/4" x 2" x 3/8" CR41-39 Crown 16" x 3-7/32" x 11/16" GE41-39 Georgetown 18" x 2" x 5/8" GC11-39 Grand Crown 16" x 2-5/32" x 3/8" GM11-19 Grand Madison 17" x 2-1/8" x 3/8" GT11-39 Grand Towne 16-3/4" x 2-1/4" x 3/8" 3E 328 328 394 394 454 394 328 394 15 376 376 442 442 501 442 376 442 HR11-19 Heritage 17-5/8" x 2-3/4" x 3/8" MA11-19 Madison 15-1/2" x 2-5/32" x 3/8" NE11-39 Newport 17-1/8" x 2-15/16" x 1/2" OR11-29 Orleans 17" x 2-1/4" x 1/8" PO41-39 Portland 17" x 3-11/32" x 11/16" RY11-29 Royale 17" x 2-1/2" x 3/8" TN41-39 Towne 16-3/8" x 2-1/4" x 3/8" WT11-19 Wharton 16-1/4" x 3" x 3/8" 3E 328 328 360 328 483 454 394 410 15 376 376 410 376 530 501 442 459 100

TRIM LOCK PARTS HOW TO ORDER KNOB & LEVER ASSEMBLIES 1 2 3 4 5 Plate/Rose Design PLATE/ROSE DESIGN BA CB CL CP CR DR GC GE HR KE MA NE NY NS PO RY TN RR RW RS RQ RX Trim Description TRIM DESCRIPTION 01 Outside knob/lever/cylinder 02 Inside knob/lever/turnpiece 03 Inside knob/lever/cylinder 04 Inside knob/lever only 05 Outside cylinder only 06 Outside knob/lever /emergency coinkey 07 Outside hotel 08 Outside knob/lever only - Knob/Lever Design / Finish - Options Alpha Number Dash Number Slash Alpha-Num Dash Alpha-Num KNOB DESIGN 10 20 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 FINISH (Pg 5) 3 3E 4 10 10B 15 26 26D 32D Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness Mortise Parts, Trim HOW TO ORDER HANDLE ASSEMBLIES 1 2 3 Handle Assembly Design / Finish - Options Alpha Slash Alpha-Num Dash Alpha-Num HANDLE ASSEMBLY DESIGN CB11-29 Cambridge CN11-19 Century CT11-19 Claremont CR41-39 Crown GE41-39 Georgetown GC11-39 Grand Crown GM11-19 Grand Madison GT11-39 Grand Towne HR11-19 Heritage MA11-19 Madison NE11-19 Newport OR11-29 Orleans PO41-39 Portland RY11-29 Royale TN41-39 Towne WT11-19 Wharton FINISH (Pg 5) 3E 15 Special OPTIONS (Pg 5) Specify Keying Handing Door Thickness 101

HOW TO ORDER CYLINDRICAL LOCKSETS 1 2 3 4 Lock Set Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num Cylindrical Locksets 1 2 3 SERIES Cylindrical Locksets 110, 110R, 210, 210R, 180, 180R, 280, 280R 170, 170R, 270, 270R, 370, 195, 195R, 295, 295R, 395, 495, 495R CYLINDRICAL FUNCTIONS MARKS # FUNCTION ANSI # N PASSAGE F75 L PRIVACY F76 P PATIO F77 DC RDC COMMUNICATING F80 A RA ENTRY F81 B RB ENTRY F82A AQ EXIT F83 S RS CLASSROOM F84 F RF STOREROOM F86 DW RDW INSTITUTION F87 DA RDA VESTIBULE F88 FQ EXIT F89 T RT CORRIDOR F90 TK HOSPITAL/PRIVACY F90 MOD. BS SVC. STA. LOCK F92 H HOTEL F93 AB RAB ENTRANCE F109 DB RDB CLASSRM. INTRUDER F110 NB EXIT F111 FB COMM. STORERM. F112 SB RSB COMM. CLASSRM. F113 DO DUMMY TRIM FEL RFEL ELECTRONICALLY LOCKED FEU RFEU ELECTRONICALLY UNLOCKED DUMMY TRIM DO DT DUMMY TRIM OUTSIDE FULL DUMMY FINISH MARKS # ANSI # US 3 Polished Brass, Clear Coated 605 US 4 Satin Brass, Clear Coated 606, 606E US 10 Satin Bronze, Clear Coated 612E US 10B Dark Bronze, Clear Coated 613E US 26 Polished Chrome, Plated 625 US 26D Satin Chrome, Plated 626 US 32 Polished Stainless Steel 629 US 32D Satin Stainless Steel 630 4 OPTIONS TRIM MODIFICATIONS CODE PRICE Tactile knob/lever, coated ext. only A1 50 Tactile knob/lever, knurled A4 50 Large rose 3-1/8" diameter A8 10 Tactile knob/lever, coated int. & ext. A18 97 DOOR THICKNESS CODE PRICE 2" (50 mm) D1 NC 2-1/4" (57mm) D2 41 LATCH CODE PRICE 2-3/4" backset, 1-1/8" x 2-1/4" face E4 6 2-3/8" backset, 1" x 2-1/4" face E6 NC 2-3/4" backset, 9/16" throw, Gr. 1, UL Listed E7 32 2-3/4" backset, 3/4" throw, Gr. 1 E8 205 5" backset, 9/16" throw, Gr. 1 E9 32 3-3/4" backset, 9/16" throw, Gr. 1 E10 32 2-3/8" backset, 1-1/8" x 2-1/4" face E11 8 2-3/4" backset, 1" x 2-1/4" face E12 8 TRIM CHANGES CODE PRICE Sargent conventional cylinder F8 17 Corbin conventional cylinder F9 17 Unit lock retrofit kit F11 238 Corbin 6 pin IC core F12 25 Corbin 7 pin IC core F13 25 Yale 6 pin IC core F14 17 Yale 7 pin IC core F15 17 Schlage 6 pin IC core F19 17 Sargent IC core F20 17 CYLINDER CODE PRICE Special optional keyway G2 32 Less cylinder G3 Deduct 15 STRIKE CODE PRICE 4-7/8" ASA strike S1 8 2-3/4" T strike S3 NC 102

80 LINE ANSI-A156.2 Grade 1 3 Hour Fire Rating GRADE 1 CYLINDRICAL KNOB SETS Series 180/180R 2-3/4" Backset Series 280/280R 2-3/4" Backset Standard Features Backset: 2-3/4" Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose Knobs: 2-1/4" dia. (180) round; 2-3/16" dia. (280) ball Roses: Adjustable both sides. Steel reinforced 2-3/4" dia. Strike: #1135, 4-7/8" ASA curved lip strike Door thickness: 1-5/8" to 1-7/8" Cylinder: MARKS C keyway, 6 pin w/ 2 keys IC Core cylinder 180 / 180R Round Knob IC Core cylinder 280 / 280R Ball Knob COMM. CYL. MARKS # IC CORE CYL. * DESCRIPTION ANSI # SERIES 180, 280 3, 32D 10, 10B, 32 N PASSAGE F75 305 328 L PRIVACY F76 309 332 P PATIO F77 309 332 DC RDC COMMUNICATING F80 369 392 A RA ENTRY F81 329 352 B RB ENTRY F82A 329 352 AB RAB ENTRY F109 329 352 AQ EXIT F83 319 342 S RS CLASSROOM F84 329 352 F RF STOREROOM F86 329 352 DW RDW INSTITUTION F87 369 392 DA RDA VESTIBULE F88 369 392 FQ EXIT F89 319 342 T RT CORRIDOR F90 339 362 TK HOSPITAL/PRIV. MOD. F90 339 362 BS RBS SERVICE STATION LOCK F92 340 363 DB CLASSROOM INTRUDER F110 414 437 DO DUMMY TRIM OUTSIDE 159 182 DT FULL DUMMY TRIM 244 267 NB COMM. PASSAGE F111 275 298 FB RFB COMM. STOREROOM F112 325 348 SB RSB COMM. CLASSROOM F113 325 348 NOTES: Split designs and/or finishes are priced at the highest design and/or finish. Special finishes, consult factory. IC Core Models: Tailpieces included, core not included. IC Core Models in US3 Finish: Add $39.00 to list price. Packed Cylindrical Locksets * Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. OPTIONS CODE PRICE Large rose 3-1/8" diameter US 32D Only A8 10 For 2" doors D1 NC For 2-1/4" doors D2 41 2-3/8" backset, 1" x 2-1/4" face E6 NC 2-3/4" backset, 3/4" throw, Gr. 1 E8 205 5" backset, 9/16" throw, Gr. 1 E9 32 3-3/4" backset, 9/16" throw, Gr. 1 E10 32 Less cylinder G3 Deduct 15 2-3/4" T strike S3 NC 103

10 LINE ANSI-A156.2 Grade 2 Plus 3 Hour Fire Rating GRADE 2 CYLINDRICAL KNOB SETS Series 110/110R 2-3/8" Backset Series 210/210R 2-3/8" Backset Cylindrical Locksets Standard Features Backset: 2-3/8" Latch #1138, Front: 1" x 2-1/4"; Throw: 1/2"; Stainless steel nose Knobs: 2-1/4" dia. (110) round; 2-3/16" dia. (210) ball Roses: Adjustable both sides. Steel reinforced 2-3/4" dia. Strike: #1136, 2-3/4" T-strike. Door thickness: 1-1/4" to 1-7/8" Cylinder: MARKS C keyway, 6 pin w/ 2 keys IC Core cylinder 110 / 110R Round Knob IC Core cylinder COMM. CYL. MARKS # IC CORE CYL. * DESCRIPTION ANSI # SERIES 110, 210 3, 32D 10, 10B, 32 N PASSAGE F75 97 97 L PRIVACY F76 121 152 P PATIO F77 123 154 DC RDC COMMUNICATING F80 172 203 A RA ENTRY F81 148 179 B RB ENTRY F82A 148 179 AB RAB ENTRANCE F109 148 179 AQ EXIT F83 137 168 S RS CLASSROOM F84 148 179 F RF STOREROOM F86 148 179 DW RDW INSTITUTION F87 173 204 DA RDA VESTIBULE F88 173 204 FQ EXIT F89 137 168 T RT CORRIDOR F90 159 190 DO DUMMY TRIM OUTSIDE 101 132 DT FULL DUMMY TRIM 108 139 NB COMM. PASSAGE F111 105 136 FB RFB COMM. STOREROOM F112 160 191 SB RSB COMM. CLASSROOM F113 160 191 210 / 210R Ball Knob NOTES: Split designs and/or finishes are priced at the highest design and/or finish. Special finishes, consult factory. IC Core Models: Tailpieces included, core not included. IC Core Models in US3 Finish: Add $39.00 to list price. Packed * Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. OPTIONS CODE PRICE Large rose, 3-1/8" diameter US 32D only A8 10 For 2" doors D1 NC For 2-1/4" doors D2 41 2-3/4" backset, 1-1/8" x 2-1/4" face E4 NC 2-3/4" backset, 9/16" throw, Gr. 1, UL Listed E7 32 2-3/4" backset, 3/4" throw, Gr. 1 E8 205 5" backset, 9/16" throw, Gr. 1 E9 32 3-3/4" backset, 9/16" throw, Gr. 1 E10 32 Less cylinder G3 Deduct 15 4-7/8" ASA strike with curved lip S1 8 104

95 LINE ANSI-A156.2 Grade 1 3 Hour Fire Rating Featuring The Clutch Standard Features Backset 2-3/4" Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose Levers: Solid cast Zamac; w/ 1/2" return (except 395 & 495) Roses: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts Strike: #1135, 4-7/8" ASA curved lip strike. Door thickness: 1-5/8" to 1-7/8". *For 1-3/8" door use K1904 spacer Cylinder: MARKS C keyway, 6 pin w/ 2 keys IC Core cylinder 195 / 195R American Lever IC Core cylinder 295 / 295R Crescent Lever GRADE 1 CYLINDRICAL LEVER SETS SURVIVOR SERIES MARKS # COMM. IC CORE CYL. CYL. * DESCRIPTION ANSI # Series 195/195R 2-3/4" Backset Series 295/295R 2-3/4" Backset Series 395 2-3/4" Backset Series 495/495R 2-3/4" Backset SERIES 195, 295, 395, 495 3, 26D 26, 4, 10, 10B N PASSAGE F75 290 350 L PRIVACY F76 310 370 LK PRIVACY F76 MOD. 335 395 P PATIO F77 305 365 DC RDC COMMUNICATING F80 365 425 A RA ENTRY F81 325 385 B RB ENTRY F82A 325 385 AB RAB ENTRANCE F109 325 385 AQ EXIT F83 315 375 S RS CLASSROOM F84 325 385 F RF STOREROOM F86 325 385 DW RDW INSTITUTION F87 365 425 DA RDA VESTIBULE F88 365 425 FQ EXIT F89 315 375 T RT CORRIDOR F90 335 395 TK RT HOSPITAL/PRIV. F90 MOD. 305 365 BS RBS SVC. STATION LOCK F92 335 365 H HOTEL F93 375 435 DB RDB CLASSRM INTRUDER F110 410 470 DO DUMMY TRIM OUTSIDE 155 215 DT FULL DUMMY TRIM 250 310 NB COMM. PASSAGE F111 270 330 FB RFB COMM. STOREROOM F112 320 380 SB RSB COMM. CLASSROOM F113 320 380 FEL RFEL ELECTRICALLY LOCKED 485 545 FEU RFEU ELECTRICALLY UNLOCKED 485 545 Cylindrical Locksets NOTE: 395 Series is Not Available with IC core. 395 Monaco Lever IC Core cylinder 495 / 495R Titan Lever OPTIONS CODE PRICE For 2" doors D1 NC For 2-1/4" doors D2 41 Over 2-1/4" - 4" thickness D9 491 2-3/8" backset, 1" x 2-1/4" face E6 NC 2-3/4" backset, 3/4" throw, Gr. 1 E8 205 5" backset, 9/16" throw, Gr. 1 E9 32 3-3/4" backset, 9/16" throw, Gr. 1 E10 32 Less cylinder G3 Deduct 15 2-3/4" T strike S3 NC AMERICAN LEVER ONLY Accepts: Sargent conventional cylinder F8 17 Corbin conventional cylinder F9 17 Corbin 6 pin IC core F12 25 Corbin 7 pin IC core F13 25 Yale 6 pin IC core F14 17 Yale 7 pin IC core F15 17 Schlage 6 pin IC core (195 Only) F19 17 Sargent IC core F20 17 Medeco IC core large format F21 17 NOTES: Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. IC Core Models: Tailpieces included, core not included. Electrified Functions 100% Duty Cycle 24v AC/DC, supplied w/ bridge rectifier EU - 210 ma EL - 125 ma * Packed Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. 105

Cylindrical Locksets 70 LINE ANSI-A156.2 Grade 2 Plus 3 Hour Fire Rating Featuring The Clutch Standard Features Backset: 2-3/4" Latch #1134, Front: 1-1/8" x 2-1/4"; Throw: 1/2"; Stainless steel nose Levers: Solid cast Zamac; w/ 1/2" return (except 370 & 470) Roses: Thru-bolted, 3-1/4" dia., spring loaded 2-#10 thru-bolts Strike: #1136, 2-3/4" T-strike. Door thickness: 1-5/8" to 1-7/8". *For 1-3/8" door use K1704 spacer Cylinder: MARKS C keyway, 6 pin w/ 2 keys IC Core cylinder 170 / 170R American Lever IC Core cylinder 270 / 270R Crescent Lever NOTE: 370 Series is Not Available with IC core. SPECIFY HANDING 370 Monaco Lever IC Core cylinder 470 / 470R Titan Lever GRADE 2 CYLINDRICAL LEVER SETS SURVIVOR SERIES COMM. CYL. NOTES: MARKS # IC CORE CYL. * Series 170/170R 2-3/4" Backset Series 270/270R 2-3/4" Backset Series 370 2-3/4" Backset Series 470/470R 2-3/4" Backset DESCRIPTION ANSI # SERIES 170, 270, 370, 470 26D 3, 4, 10, 10B, 26 N PASSAGE F75 230 259 L PRIVACY F76 248 277 P PATIO F77 243 272 DC RDC COMMUNICATING F80 308 337 A RA ENTRY F81 265 294 B RB ENTRY F82A 265 294 AB RAB ENTRANCE F109 265 294 AQ EXIT F83 254 283 S RS CLASSROOM F84 265 294 F RF STOREROOM F86 265 294 DW RDW INSTITUTION F87 308 337 DA RDA VESTIBULE F88 308 337 FQ EXIT F89 254 283 T RT CORRIDOR F90 276 305 BS RBS SVC. STATION LOCK F92 276 305 H HOTEL F93 319 348 DO DUMMY TRIM OUTSIDE 141 170 DT FULL DUMMY TRIM 206 235 NB COMM. PASSAGE F111 211 240 FB RFB COMM. STOREROOM F112 276 305 SB RSB COMM. CLASSROOM F113 276 305 Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. IC Core Models: Tailpieces included, core not included. OPTIONS CODE PRICE For 2" doors D1 NC For 2-1/4" doors D2 41 2-3/8" backset, 1" x 2-1/4" face E6 NC 2-3/4" backset, 9/16" throw, Gr. 1, UL Listed E7 32 2-3/4" backset, 3/4" throw, Gr. 1 E8 205 5" backset, 9/16" throw, Gr. 1 E9 32 3-3/4" backset, 9/16" throw, Gr. 1 E10 32 Less cylinder G3 Deduct 15 4-7/8" ASA strike S1 8 AMERICAN LEVER ONLY Accepts: Sargent conventional cylinder F8 17 Corbin conventional cylinder F9 17 Corbin 6 pin IC core F12 25 Corbin 7 pin IC core F13 25 Yale 6 pin IC core F14 17 Yale 7 pin IC core F15 17 Schlage 6 pin IC core (170 Only) F19 17 Sargent IC core F20 17 Medeco IC core large format F21 17 * Packed Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. 106

Contract LINE 1120 SERIES CYLINDRICAL KNOB SETS ANSI Grade 2, UL Listed 3 Hours Standard Features Knobs: 2" Diameter ball; Roses: 3" Diameter Backset: 2-3/8" Standard, 2-3/4" optional Latch: Stainless steel Latch Bolt, 1/2" throw, 1" x 2-1/4" front on 2-3/8" backset, 1-1/8 x 2-1/4" front on 2-3/4" backset Cylinder: Marks C keyway, 6 pin w/2 keys Strike: 2-3/4" T standard, 4-7/8" ASA optional Door Thickness: 1-3/8" to 1-3/4" Life Test: 400,000 cycles minimum ANSI Test: Meets ANSI A156.2, Grade 2 Fire Test: UL Listed, 3 hour fire rated Warranty: 1 Year Limited Mechanical Warranty MARKS # ANSI # DESCRIPTION SERIES 1120 3, 32D 1120AB F109 ENTRANCE 84 1120F F86 STOREROOM 84 1120L F76 PRIVACY 58 1120N F75 PASSAGE 55 1120DO 1/2 DUMMY 38 Packed 2-3/8" Backset Standard, 2-3/4" Available 2-3/4" T Strike Standard, 4-7/8" ASA Strike Available OPTIONS CODE PRICE 2-3/4" Backset, 1-1/8" x 2-1/4" face E6 NC 4-7/8" ASA Strike S1 8 KEYING PRICE Keyed Different (KD) Standard NC Keyed Alike (KA) Optional NC Master Keyed (MK) Optional 12 Grand Master Keyed (GMK) Optional 12 Great Grand Master Keyed (GGMK) Optional 12 Great Grand Master Keyed (GGMK) Optional 17 Cylindrical Locksets 1150 SERIES CYLINDRICAL LEVER SETS ANSI Grade 2, UL Listed 3 Hours Standard Features Levers: American Design Roses: 3-5/16" Diameter Backset: 2-3/4" Standard; 2-3/8", 3-3/4", 5" available Latch: Stainless steel Latch Nose, 1/2" throw, 1-1/8 x 2-1/4" front on 2-3/4" backset, 1" x 2-1/4" front on 2-3/8" backset Cylinder: Marks C keyway, 6 pin w/2 keys Handing: Reversible, Non-handed Strike: 4-7/8" ASA standard, 2-3/4" T available Door Thickness: 1-3/8" to 1-3/4" Studs: Removable thru-bolts Over-Under Life Test: 1,000,000+ cycles ANSI Test: Exceeds ANSI A156.2, Grade 2 Fire Test: UL Listed, 3 hour fire rated. Warranty: 5 Year Limited Mechanical Warranty MARKS # SERIES 1120 COMM IC CORE ANSI # DESCRIPTION CYL. CYL. * 3, 4 10B 26D 1150AB 1150RAB F109 ENTRANCE 127 141 124 1150F 1150RF F86 STOREROOM 127 146 124 1150S 1150RS F84 CLASSROOM 137 156 134 1150L F76 PRIVACY 119 137 116 1150N F75 PASSAGE 113 132 110 1150DT FULL DUMMY 102 119 97 Packed 2-3/4" Backset Standard, 2-3/8" Available 4-7/8" ASA Strike Standard, 2-3/4" T Strike Available * Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. Can Be Assembled With Or Without Thru-studs OPTIONS CODE PRICE 2-3/8" backset, 1" x 2-1/4" face E6 NC 3-3/4" backset, 9/16" throw, Gr. 1 E10 32 5" backset, 9/16" throw, Gr. 1 E9 32 2-3/4" T strike S3 NC 2-3/4" backset, 9/16" throw, Gr. 1, UL Listed E7 32 KEYING Price Keyed Different (KD) Standard NC Keyed Alike (KA) Optional NC Master Keyed (MK) Optional 12 Grand Master Keyed (GMK) Optional 12 Great Grand Master Keyed (GGMK) Optional 12 Great Grand Master Keyed (GGMK) Optional 17 107

Cylindrical Locksets ANSI# MARKS ANSI# MARKS CODE FUNCTION CODE FUNCTION F75......................... N F88......................... DA F76......................... L F89......................... FQ F76 (MOD.).................. LK F90......................... T F77......................... P F90......................... TK F80......................... DC F92......................... BS F81......................... A F93......................... H F82A....................... B F109........................ AB F83......................... AQ F110........................ DB F84......................... S F111........................ NB F86......................... F F112........................ FB F87............................... DW F113........................ SB ANSI # CODE F75 PASSAGE: Latch by knob/lever either side. F76 PRIVACY: Latch by knob/lever either side unless outside knob/lever locked by push button from inside. Outside unlocks by turning inside knob/lever, outside emergency turn or closing door. F76 (MOD.) HOSPITAL/PRIVACY: Latch by knob/lever either side unless outside lever locked by push button from inside. Outside unlocks by turning inside knob/lever, outside emergency turnknob or closing door. F77 PATIO: Deadlocking latch by knob/lever either side unless outside knob/lever locked by push button inside. Unlocks by turning inside knob/lever or closing door. F80 COMMUNICATING: Key both sides. Locks or unlocks either knob/lever independent of the other. Deadlocking latch. F81 ENTRY: Deadlocking latch bolt by knob/lever either side except when outside locked by turn button inside. When outside locked, key outside or knob/lever inside opens lock. Turn button operated manually. F82A ENTRY: Deadlocking latch by knob/lever either side. Outside locked by push button inside. When outside locked by push button inside, key opens lock, unlocks push button. Inside knob/lever always opens latch. Closing door does not release push button. F83 EXIT: Deadlocking latch by knob/lever either side except when outside locked by turn button inside. Inside knob/lever always opens latch. Turn button operated manually. F84 CLASSROOM: Deadlocking latch by knob/lever inside. Outside knob/lever locked or unlocked by key. F86 STOREROOM: Deadlocking latch by knob/lever inside, key outside. Outside knob/lever always locked. F87 INSTITUTION: Both knobs/levers always locked. Deadlocking latch by key both sides. F88 VESTIBULE: Deadlocking latch by knob/lever either side, except when outside knob/lever locked by key inside. Key outside retracts deadlocking latch. Inside always open. 108 CYLINDRICAL KNOB/LEVER FUNCTIONS MARKS FUNCTION I/S O/S N L LK P DC A B AQ S F DW DA ANSI # CODE F89 EXIT: Deadlocking latch by knob/lever inside. Outside always locked. F90 CORRIDOR: Deadlocking latch by knob/lever either side unless outside locked by key or inside push button. Unlock by key, turning inside knob/lever or closing door. F90 (MOD.) HOSPITAL/PRIVACY: Deadlocking latch by knob/lever either side unless outside locked by knob/lever or inside push button. Unlock by knob, turning inside knob/lever or closing door. F92 SERVICE STATION LOCK: Deadlocking latch by knob/lever either side unless outside locked by key or inside push button. Unlock by key, turning inside knob/lever or closing door, except when slotted push button is turned in locked position. Inside knob/lever always opens latch. F93 HOTEL: Deadlocking latch by knob/lever inside. Outside knob/lever always locked. Inside push button projects indicator on cylinder face shutting out all keys except emergency key. Turning inside knob/lever or closing door releases push button. F109 ENTRY: Outside locked by pushing turn button inside. Key outside opens lock. Rotating inside knob/lever releases button and outside knob/lever. By pushing and turning inside button, outside knob/lever remains locked. Deadlocking latch. F110 CLASSROOM INTRUDER: Deadlocking latch by knob/lever either side, except when outside locked by key inside. Key outside locks or unlocks outside. Inside always open DUMMY TRIM: Outside only, rigid. DUMMY TRIM: Both sides, rigid. F111 COMMUNICATING PASSAGE: Blank outside. Deadlocking latch by knob/lever inside. F112 COMMUNICATING STOREROOM: Blank outside. Deadlocking latch by key only. Knob/Lever always locked. F113 COMMUNICATING CLASSROOM: Blank outside. Inside knob/lever locked or unlocked by key. Deadlocking latch. ELECTRICALLY LOCKED - FEL: Outside always locked electrically. Open by key outside, switch or loss of power. Deadlocking latch by lever inside. Lever only. ELECTRICALLY UNLOCKED - FEU: Outside always locked until unlocked by key or electrically energized. Deadlocking latch by lever inside. Lever only. MARKS FUNCTION I/S O/S FQ T TK BS H AB DB DO DT NB FB SB FEL FEU

HOW TO ORDER CYLINDRICAL LOCKSETS 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num 110 110R 210 210R 180 180R 280 280R 170 170R 270 270R 370 LOCK SERIES 195 195R 295 295R 395 495 495R 1120 1150 MARKS FUNCTION (Pg 108) N L LK P DC RDC A RA B RB AB RAB AQ S RS F DW RDW DA RDA FQ T RT TK BS RBS H DB DO DT NB FB RFB SB RSB FEL RFEL FEU RFEU FINISH (Pg 102) 3 4 10 10B 26 26D 32 32D Special OPTIONS (Pg 102) Specify Keying Handing Door Thickness Cylindrical Locksets QUANTITY QUANTITY How To Order Example 195 RDA / 3 E9 Survivor Series Cylinder Lever Lockset IC Core Institution Function Polished Brass 5" Backset / 109

CYLINDRICAL LOCK ACCESSORIES Latches Grade 2 1/2" Throw LATCH THROW GRADE 2 1/2" Backset 2-3/8" Front 1" x 2-1/4" Backset 2-3/4" Front 1-1/8" x 2-1/4" FUNCTION 26D 3, 32D 10, 10B 1138A 1134A ENTRANCE 32 41 1138L 1134L PRIVACY 25 32 1138N 1134N PASSAGE 25 32 1138P 1134P PATIO 32 41 Grade 1 3/4" Throw GRADE 1 9/16" 1834A ENTRANCE 66 73 1834L PRIVACY 57 66 1834N PASSAGE 57 66 1834P PATIO 57 73 GRADE 1 3/4" 1832A (US 26D ONLY) ENTRANCE 163 GRADE 1 9/16" 1854A 5" Backset ENTRANCE 97 Cylindrical Locksets PART # DESCRIPTION 3, 32D 10, 10B 1135 4-7/8" ASA strike, curved lip 17 17 STRIKES 1136 2-3/4" T-strike w/dust box, curved lip 8 16 1135 1136 1136-M SURVIVOR SERIES ALUMINUM SPACER RINGS 1136-M 2-3/4" T-strike w/dust box, straight lip 9 17 K1904 K1704 For 1-3/8" door (2 per set), 3-7/16" dia. For 1-3/8" door (2 per set), 3-1/4" dia. 29 37 1997 1835 1855 KNOB SPACER RINGS K2804 For 1-3/8" door (2 per set - 2-3/4" dia.) 29 38 PART # DESCRIPTION NO FINISH BACKSET EXTENDERS 1835 3-3/4" (using 2-3/4" Gr. 1 backset latch) 1855 5" (using 2-3/4" Gr. 1 backset latch) 1855-P 5" (Gr. 1 L, P Function only) 90 BRIDGE RECTIFIER 1901 Bridge Rectifier 24 V AC/DC (no finish) 37 1904 1704 K2804 1901 CYLINDER RETAINER 1997 Lever handle cylinder retainer 1 MARKS Survivor Series Lock Installation Tool J295 The J295 provides exact thru-hole locations for the Survivor cylindrical lockset in hollow metal and wood doors. J295 Survivor Series Installation Tool... $161.00 Hollow Metal Door Installation Wood Door Installation 110

CYLINDRICAL LOCK CYLINDERS Cylinders Conventional cylinder Specify Tailpiece. Tailpiece Not Included. Cylindrical Lock Tailpieces 1903 HR1984S 1903S IC core cylinder (Will Fit Best Housings.) 1903-L 1903S-L F1903-C F1903S-C F1903-H Cylindrical IC Core Tailpieces HR1984 AR1989-Y HR1984-G HR1984S-G AR1989S-Y AR1999-M AR1999S-M * PART # DESCRIPTION PRICE 1982 6 Pin, W/2 Nickel-Silver Keys 26 1982H 6 Pin, W/2 Nickel-Silver Keys 58 R1182 6 Pin Core, Uncombinated 32 R1183 7 Pin Core, Uncombinated 32 RA1182 6 Pin Core, Combinated 46 RA1183 7 Pin Core, Combinated 46 RC1182 6 Pin Core, Construction Core 33 RC1187 Plastic Core Turnknob 4 IC core pricing includes KA, KD or MK Keying. Consult Factory on pricing of IC Cores when ordered with Locksets. * PART # CODE FUNCTION CYLINDER PRICE 1903 9 AB, B, DA (ext.), DW, F, FEL, FEU MARKS 1982 2 1903S S9 S, DA (int.), DB, DC, SB, T, TS 1903-L L9 AB, B, DA (ext.), DW, F, FEL, FEU 1903S-L SL9 S, DA (int.), DB, DC, SB, T, TS F1903-C AB, B, DA (ext.), DW, F, FEL, FEU F1903S-C S, DA (int.), DB, DC, SB, T, TS Arrow PK 100C, Ilco 705, Lori 1539, Sargent 13-3266, Abloy, ASSA 65673, 65691 Schlage 23-001, Primus, Corbin-Russwin 2000-034 4 F1903-H H H Marks 1984H PART # CODE FUNCTION CORE PRICE HR1984 R1 AB, B, DA (ext.), DW, F, FEU, FEL HR1984S RS S, DA (int.), DB, DC, SB, T, TS 6 or 7 pin Marks, KSP, Best, Falcon, Medeco, Keymark, Sargent, Schlage Small Format HR1984-G RG9 AB, B, DA (ext.), DW, F, FEU, FEL 6 or 7 pin Corbin 2 HR1984S-G RSG S, DA (int.), DB, DC, SB, T, TS AR1989-Y 9MY AB, B, DA (ext.), DW, F, FEU, FEL 6 or 7 pin Yale 4 AR1989S-Y 9SY S, DA (int.), DB, DC, SB, T, TS AR1999-M 9M AB, B, DA (ext.), DW, F, FEU, FEL Medeco 4 AR1999S-M 9SM S, DA (int.), DB, DC, SB, T, TS Medeco 4 2 2 Cylindrical Locksets F1903-C-F19 F1903S-C-F19 For Keying information see Page 112 See list of cylinders available. R1981 R1983 F1903-C-F19 AB, DW, F 6 pin Schlage F1903S-C-F19 S, DA, DB, DC, SB, T, TS Large Format R1981 Spacer 2 R1983 Security Disc 2 HOW TO ORDER CYLINDRICAL LOCK CYLINDER & TAILPIECES 1 2 3 Part Number / Finish - Options Number Slash Alpha-Num Dash Alpha-Num 3 4 10 10B 26 26D 32 32D Special Tailpiece & keying information must be included in the option section. 111 4

KEYS & KEYING Keys Can Stamp A Maximum Of 6 Characters On Key. STANDARD KEYWAYS MARKS A MARKS Keys PIN LENGTH ACCEPTS Arrow Kwikset Segal 9 SHOULDER INCREMENTS IC Core Keys PIN TO PIN TO 1st PIN PLUG DISTANCE DIAMETER.015".264".156".504" MARKS C Schlage C.015".231".156".504" Construction Master Keying: The construction master key (CMK) is to be used temporarily while the building is under construction. When construction is completed, the end user defeats the CMK s operation by turning the change key in each cylinder, rather than replace or re-keying the cylinder. Marks USA uses a program which is called the lost ball program. When construction key system is set up, three small ball bearings (construction balls) are placed between the bottom pin and master pin, normally in the last chamber as a temporary master pin. The construction key is usually the same cut as the top master key with the exception of the sixth cut which is two increments higher. The construction master key will work in any cylinder until cylinder is defeated by making one full rotation in the cylinder with the change key. The cylinder plug requires a small diameter pocket drilled on one side of one pin chamber so when rotating the cylinder with the change key the pocket will capture the construction balls. The construction pocket in the plug is smaller than a pin chamber. This prevents any top pins or master pins from entering as the plug rotates. Once the cylinder is defeated, there is no way for the cylinder to be construction keyed again without disassembling it. Cylindrical Locksets PART # DESCRIPTION BLANK CUT 2164A MARKS A 5 PIN BRASS 1 3 2164C MARKS C 5 PIN BRASS, NICKEL PLATED 1 3 2184A MARKS A 6 PIN NICKEL SILVER 2 4 2184C MARKS C 6 PIN NICKEL SILVER 2 4 2185C MARKS C 6 PIN LARGE BOW 4 5 R1164 IC CORE 6 OR 7 PIN (SMALL FORMAT) 2 4 R3164 SCHLAGE IC CORE CONTROL KEY 2 4 Secondary Method: Permanent Master Key Voids CMK Operation BEST A thru M keyway. Please specify. IC Core pricing includes KA, KD or MK Keying. PART # DESCRIPTION REGULAR IC CORE KA KEYED ALIKE NC NC KD KEYED DIFFERENT NC NC MK MASTER KEYED 16 NC CMK CONSTRUCTION MASTER KEYED (Includes GMK or MK) 24 GMK GRAND MASTER KEYED 16 8 GGMK GREAT GRAND MASTER KEYED 16 8 GGGMK GREAT GREAT GRAND MASTER KEYED 16 HK HOTEL KEYED (Guest, Maid, Emergency) 21 KEYING TO A SPECIFIC CODE NUMBER 10 10 STAMPING LETTERS / NUMBERS ON KEY $5 PER KEY US PROPERTY - DO NOT DUPLICATE $5 PER KEY VISUAL KEY CONTROL (VKC) 10.00 CONCEAL KEY CONTROL 10.00 EXTRA CUT KEYS WITH LOCKSET SEE KEYS ABOVE LARGE BOW KEY $5 PER KEY KEY BITTING CODE LIST 190 IC CORE PRICING INCLUDES KA, KD OR MK KEYING Cylindrical Cylinder Thumbturn Concealed Cylinder Mortise Cylinder Length * Small Format IC Core 6 or 7 pin Schlage format IC core cylinder Rim Cylinder Housing Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. Removable Core Housing 112

HOW TO ORDER TUBULAR LOCKSETS 1 2 3 4 5 6 Lock Series Rose Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num 1 SERIES Tubular Locksets 1 Cylindrical Cartridge 1 2 ROSES DESIGN 9602-R Rose with ring 2-9/16" dia. RR 9602 Plain rose 2-9/16" dia. RW 5602-R Small rose with ring 2-1/4" dia. RQ 5602 Small rose 2-1/4" dia. RS 7602 Square rose 2-9/16" square RX 3 4 ROSES KNOB/LEVER KNOBS DESIGN 1153 Round, wrought 10 1253 Ball, wrought 20 9631 Ball, forged 30 9609 Eclipse, forged 60 LEVERS DESIGN 5642 Palace 42 5652 Madison 52 5657 Monaco 57 5662 Royale 62 5672 Towne 72 5677 Maxwell 77 5678 Omni 78 5682 Plaza 82 5683 Dayton 83 5686 Crescent 86 5692 American 92 5696 Titan 96 TUBULAR FUNCTIONS MARKS # ANSI # DEADBOLT/DEADLATCHES K RK CYL. BY TURNPIECE KL RKL KEY BY LEVER L RL COMM. SINGLE CYL. M RM DOUBLE CYLINDER S RS CLASSROOM X TURNPIECE 5 FINISH MARKS ANSI # US 3 Polished Brass, Clear Coated 605 US 3E Polished Brass PVD 605E US 4 Satin Brass, Clear Coated 606, 606E US10 Satin Bronze, Clear Coated 612E US 10B Dark Bronze, Clear Coated 613E US15 Satin Nickel 619, 619E US 19 Flat Black, Powder Coated 622, 622E US 20A Dark Brown, Powder Coated 695E US 26 Polished Chrome, Plated 625 US 26D Satin Chrome, Plated 626 US 32 Polished Stainless Steel 629 US 32D Satin Stainless Steel 630 6 OPTIONS TRIM MODIFICATIONS CODE PRICE Tactile knob/lever, coated ext. only A1 50 Tactile knob/lever, knurled A4 50 Tactile knob/lever, coated int. & ext. A18 97 DOOR THICKNESS CODE PRICE 1-3/4" D4 NC 1-3/8" D5 NC LATCH CODE PRICE 2-3/4" backset, 1-1/8" x 2-1/4" face E4 6 2-3/8" backset, 1" x 2-1/4" face E6 NC 2-3/4" backset, 9/16" throw, Gr. 1, UL Listed With Cylindrical Cartridge E7 60 * 2-3/8" backset, 1-1/8" x 2-1/4" face E11 8 2-3/4" backset, 1 x 2-1/4" face E12 8 Adjustable latch 1-1/8" x 2-1/4" face E13 8 TRIM CHANGES CODE PRICE For 1-1/2" bore F6 15 STRIKE CODE PRICE 4-7/8" ASA strike S1 8 2-3/4" T strike S3 NC 3-5/8" Security strike S4 9 2-1/4" Curved lip strike S5 NC * E7 Option Available: 2-3/8", 2-3/4", 3-3/4" & 5" Backset, for N Function ONLY. Tubular Locksets TUBULAR LOCKSETS N PASSAGE F01 NB EXIT L PRIVACY F02 A ENTRY LOCK F82 S CLASSROOM F84 F STOREROOM F86 DI DUMMY TRIM INSIDE DO DUMMY TRIM OUTSIDE DT FULL DUMMY 113

ROSE DESIGN RR, RW, RS, RQ, RX Roses Rose w/ Ring RR Plain Rose RW Small Rose RS Small Rose w/ Ring RQ! Square Rose RX Round Knob 10 Palace Lever 42 Towne Lever 72 Dayton Lever 83 Tubular Locksets Ball Knob 20 Madison Lever 52 Maxwell Lever 77 Crescent Lever 86 Ball Knob 30 Monaco Lever 57 Omni Lever 78 American Lever 92 Eclipse Knob 60 Royale Lever 62 Plaza Lever 82 Titan Lever 96 114

ROSE DESIGN RR, RW, RS, RQ, RX Series 1 2-3/8" Backset Standard Features Backset: 2-3/8", 2-3/4" optional Front: 1" x 2-1/4" Thru-bolted screwless knob/lever rose Concealed mounting screws Lever support springs Independent spring loaded captivated spindles Strike: 2-1/4" full curved lip Latch support housing Door thickness: 1-3/8" to 1-3/4" Privacy function - interior with automatic release KNOBS 10, 20 30, 60 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 LEVERS 82, 83, 86, 92, 96 42, 52, 57, 62, 72, 77, 78, 82, 83, 86, 92, 96 MARKS # FUNCTION ANSI # 3, 10, 10B 26D, 32D 3E, 15, 26 26, 26D 32, 32D 3E, 4, 10E, 10B, 15 N PASSAGE F01 168 221 229 229 249 L PRIVACY F02 178 231 239 239 259 NB COMMUNICATING 158 211 219 219 239 DI DUMMY TRIM INSIDE 77 104 108 108 118 DO DUMMY TRIM OUTSIDE 77 104 108 108 118 DT FULLY DUMMY 154 207 215 215 235 NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory.! Square Rose RX $27.00 Additional Knobs Levers Tubular Locksets OPTIONS CODE PRICE NOTE 2-3/4" backset, 1-1/8" x 2-1/4" face E4 6 2-3/4" backset, 9/16" throw, Gr. 1, UL Listed WITH CYLINDRICAL CARTRIDGE E7 60 * 2-3/8" backset, 1-1/8" x 2-1/4" face E11 8 N Function Only 2-3/4" backset, 1" x 2-1/4" face E12 8 4-7/8" ASA strike S1 8 2-3/4" T strike S3 NC US 26 Interior x26 18 83, 92, 96 Only E7 Option Available: 2-3/8", 2-3/4", 3-3/4" & 5" Backset * 115

HOW TO ORDER ROSE DESIGN TUBULAR LOCKSETS 1 2 3 4 5 6 Lock Series Rose Design Knob/Lever Design MARKS Function / Finish - Options Number Alpha Number Alpha Slash Alpha-Num Dash Alpha-Num Tubular Locksets LOCK SERIES! 1 ROSE DESIGN RR RW RS RQ RX KNOB DESIGN 10 20 30 60 LEVER DESIGN 42 52 57 62 72 77 78 82 83 86 92 96 MARKS FUNCTION (Pg 117) N NB L DI DO DT FINISH (Pg 113) 3 3E 4 10 10B 15 26 26D 32 32D Special OPTIONS (Pg 113) Specify Keying Handing Door Thickness QUANTITY How To Order Example 1 RW 92 N / 32D Tubular Lockset Rose without Ring American Lever Passage Function Satin Stainless Steel Finish S3 2-3/4" T Curved Lip Strike QUANTITY 1 R / 116

TUBULAR LOCKSET ACCESSORIES Strikes, Latches, Support Housing PART # DESCRIPTION BACKSET FRONT 3, 10, 10B, 26 32 1631 1536 1145 1631 Support housing 5 - No Finish 1536 T Strike, 2-3/4" curved lip 5 10 1145 4-7/8"ASA strike 6 16 1636 Strike, 2-1/4" full curved lip 5 10 1636 1634L 1538L 1636 1634N 1538N 1634N Passage latch w/ strike 2-3/4" 56 1634L Privacy latch w/ strike 1" x 2-1/4" 53 1538N Passage latch w/ strike 2-3/8" 35 1538L Privacy latch w/ strike 1" x 2-1/4" 45 1648N UL Listed Adjustable Backset Latch TUBULAR CONTRACT SERIES ONLY 2-3/8" - 2-3/4" 72 1648N Latches & Cylindrical Cartridge Tubular Locksets LATCH THROW Backset 2-3/8" Front 1" x 2-1/4" Backset 2-3/4" Front 1-1/8" x 2-1/4" FUNCTION 3, 32D 10, 10B GRADE 2 1/2" 1138A 1134A ENTRANCE 32 41 GRADE 1 9/16" 1834A ENTRANCE 66 73 1834 Cylindrical Cartridge NOTE: Cylindrical Cartridge is for use with E7* Option ONLY. TUBULAR LOCKSET FUNCTIONS ANSI # CODE MARKS # FUNCTION ANSI # CODE MARKS # FUNCTION F01: PASSAGE N DUMMY TRIM OUTSIDE: Dummy trim outside ONLY. Rigid, Thru-bolted. DO F02: PRIVACY With Push Button L DUMMY TRIM INSIDE: Dummy trim inside ONLY. Rigid, Thru-bolted. DI EXIT: NB FULL DUMMY TRIM: DT Dummy trim both sides. Rigid, Thru-bolted. 117

RESIDENTIAL & LIGHT COMMERCIAL CYLINDRICAL KNOB & TUBULAR LEVER SETS ANSI GRADE 3 230 SERIES BALL KNOB Standard Backset 2-3/8", optional 2-3/4" Standard Features ANSI/BHMA A156.2., Series 4000, Grade 3 Pressure cast stainless steel or wrought brass knobs Roses: 2-15/16" diameter Latch: 1" x 2-1/4" front, 1/2" throw Strike: 2-1/4" full lip strike Door thickness 1-3/8" to 1-3/4" Additional finishes, consult factory NOTE: Latches & strikes have radius corners. OPTIONS CODE PRICE 2-3/4" backset, 1-1/8" x 2-1/4" face E4 6 4-7/8" ASA strike S1 8 230 SERIES BALL KNOB FINISH GROUPS MARKS # FUNCTION ANSI # 3, 32D L PRIVACY F02 40 N PASSAGE F01 38 DO DUMMY TRIM OUTSIDE 18 DT FULLY DUMMY 30 Packed FINISHES: ANSI 605 626 630 US Code 3 26D 32D 230 Residential & Light Commercial 150 SERIES AMERICAN LEVER Available in 3 & 26D Finish Standard Features ANSI/BHMA A156.2., Series 4000, Grade 3 Pressure cast Levers Roses: 2-15/16" diameter. Adjustable Backset: 2-3/8" - 2-3/4" Latch: 1" x 2-1/4" front, 1/2" throw Strike: 2-1/4" full lip strike Door thickness: 1-3/8" to 1-3/4" Additional finishes, consult factory. NOTE: Latches & strikes have radius corners. OPTIONS CODE PRICE 2-3/4" backset, 1-1/8" x 2-1/4" face E4 6 4-7/8" ASA strike S1 8 150, 250, 350, 450, 550 SERIES LEVERSETS FINISH GROUPS MARKS # FUNCTION ANSI # 3, 15, 26D L PRIVACY F02 50 N PASSAGE F01 48 DO DUMMY TRIM OUTSIDE 25 DT FULLY DUMMY 42 Packed FINISHES: ANSI 605 619 626 US Code 3 15 26D 150 250 350 450 550 250 SERIES CRESCENT LEVER Available in 3 & 26D Finish 350 SERIES MONACO LEVER Available in 3 & 26D Finish 450 SERIES TITAN LEVER Available in 3 & 26D Finish 550 SERIES ATLANTIC LEVER Available 15 Finish ONLY Specify Handing Specify Handing 118

130 SERIES DEFENDER Tubular Deadbolts ANSI 156.5 Grade 1 Standard Features Bolt: 1" throw Unitized assemblies for 2-1/8" bore Strike: #1335, 2-3/4" x 1-1/8" strike Door thickness: 1-5/8" to 1-7/8" Cylinder: MARKS C keyway, 6 pin w/ 2 keys 2-3/8" Backset Latch 1" x 2-1/4" front * Standard IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Medeco KeyMark tm, Falcon & Best. IC Core Tailpieces ARE Included. 130M Standard Features Latch: Grade 1, Series 1 cylindrical cartridge, 9/16" throw, 2-3/4" backset Unitized assemblies for 2-1/8" bore Strike: #1136, 2-3/4" strike Door thickness: 1-3/8" to 2-3/8" Cylinder: MARKS C keyway, 6 pin w/ 2 keys 2-3/4" Backset Latch 1-1/8" x 2-1/4" front NOTES 145 SERIES * Standard IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Medeco KeyMark tm, Falcon & Best. IC Core Tailpieces ARE Included. COMM. CYL. COMM. CYL. MARKS # IC CORE CYL. Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. IC Core Models: Core not included. 130RM DESCRIPTION ANSI # 3, 10, 10B, 26D, 32, 32D K RK CYLINDER x TURNPIECE E0151 129 L RL COMMUNICATING SINGLE CYL E0161 129 M RM DOUBLE CYLINDER E0141 148 S RS CLASSROOM E0171 134 X TURNPIECE x BLANK PLATE E0191 108 MARKS # IC CORE CYL. CODE PRICE For 2" door D1 NC For 2-1/4" door D2 41 For 1-1/4" to 1-1/2" door D8 NC 2-3/4" backset, 1-1/8" x 2-1/4" face E4 6 For 1-1/2" bore F6 15 Sargent original cylinder or core F8 17 Less cylinder G3 Deduct 15 3-5/8" x 1-1/4" Security strike S4 9 DESCRIPTION ANSI # OPTIONS 3, 10, 10B, 26D, 32, 32D K RK CYLINDER x TURNPIECE E0121 166 L RL COMMUNICATING SINGLE CYL E0131 166 M RM DOUBLE CYLINDER E0111 179 X TURNPIECE x BLANK PLATE 140 KL RKL CYLINDER BY LEVER 280 OPTIONS Packed DEFENDER Cylindrical Cartridge Deadlatches ANSI 156.5 Grade 1 3 Hour Fire Rating NOTES Split designs and / or finishes are priced at the highest design and / or finish. Special finishes, consult factory. IC Core Models: Core not included. Packed CODE PRICE For 2" door D1 NC For 2-1/4" door D2 41 2-3/8" backset, 1-1/8" x 2-1/4" face E11 8 Sargent original cylinder or core F8 17 Less cylinder G3 Deduct 15 4-7/8" ASA strike S1 8 For 1-3/8" doors, use spacer rings K1342 (pg. 120) Tubular Locksets 145KL 140RM 145K 119

DEFENDER SERIES ACCESSORIES Strikes, Latches & Spacers 1135 1136 1137 1335 1336 1337 K1342 1334 1338 PART # DESCRIPTION 3, 32D 10, 10B, 32 1135 4-7/8" ASA STRIKE 11 14 1136 2-3/4" T STRIKE W/DUST BOX 5 9 1137 DUST BOX, PLASTIC, LATCH 1 1335 2-3/4" x 1-1/8" STANDARD STRIKE 3 5 1336 DUST BOX, PLASTIC, DEADBOLT 1 1337 K1342 DEADBOLTS 3-5/8" x 1-1/4" HIGH SECURITY STEEL STRIKE, PLATED FINISH SPACER RING KIT FOR 1-3/8" DOOR (2 PER SET) 49 14 19 1334 2-3/4" BACKSET FRONT 1-1/8" x 2-1/4" 26 32 1338 2-3/8" BACKSET FRONT 1-1/8" x 2-1/4" 26 32 Tubular Locksets Latches & Cylindrical Cartridge LATCH THROW Backset 2-3/8" Front 1" x 2-1/4" Backset 2-3/4" Front 1-1/8" x 2-1/4" FUNCTION 3, 32D 10, 10B GRADE 2 1/2" 1138A 1134A ENTRANCE 32 41 GRADE 1 9/16" 1834A ENTRANCE 66 73 1834 Cylindrical Cartridge NOTE: Cylindrical Cartridge is for use with E7* Option ONLY. Tailpieces 1353 1354 1355 1353-L 1354-L 1355-L A1354-2C A1354-2S 1354-2M 1403 1405 F1403-C F 1405-C 1403-L 1405-L PART # TAILPIECES FOR 130 DEADBOLTS PRICE 1353 1-1/4" to 1-1/2" MARKS 1982 1 1354 1-5/8" to 1-7/8" 1 1355 2" to 2-1/4" 1 1353-L 1-3/8" to 1-1/2" 1 1354-L 1-5/8" to 1-7/8" LORI 1539 / ILCO 705 1 1355-L 2" to 2-1/4" 1 1354-2M 1-5/8" to 1-7/8" MEDECO #20-200052 / 1 #20-0700 A1354-2C 1-5/8" to 1-7/8" CORBIN 2000-34 2 A13542-S 1-5/8" to 1-7/8" SCHLAGE 2 TAILPIECES FOR 145 DEADLATCHES 1403 1-5/8" to 1-7/8" MARKS 1 1405 2" to 2-1/4" TAILPIECE 1 F1403-C 1-5/8" to 1-7/8" SCHLAGE 2 F1405-C 2" to 2-1/4" TAILPIECE 2 1403-L 1-5/8" to 1-7/8" LORI / ILCO 2 1405-L 2" to 2-1/4" TAILPIECES 2 120

HOW TO ORDER DEFENDER SERIES LOCKSETS 1 2 3 4 Lock Series MARKS Function / Finish - Options Number Alpha Slash Alpha-Num Dash Alpha-Num LOCK SERIES 130 130R 145 145R MARKS FUNCTION (See Below) K RK L RL KL RKL M RM S RS X ANSI # MARKS # CODE FUNCTION 130: E0151...K E0161...L E0141...M E0171...S E0191...X 145: E01101...K E0131...L E01101...KL E01111...M E01121...X FINISH (Pg 113) 3 10 10B 15 26D 32 32D Special OPTIONS (Pg 119) Specify Keying Handing Door Thickness DEADBOLT/DEADLATCH FUNCTIONS ANSI # MARKS # CODE FUNCTION Cylinder by Turnpiece: Deadbolt/deadlatch by inside turnpiece or outside key. Communicating Single Cylinder: Deadbolt/deadlatch by key from one side only. Key by Lever: Deadlatch by key outside. Inside lever always opens latch. Double Cylinder: Deadbolt/deadlatch by key either side. K L KL M Tubular Locksets Classroom: Deadbolt by outside key. Turnpiece will retract but not project deadbolt. Turnpiece: Deadbolt/deadlatch by inside turnpiece. Blank plate outside. S X 121

GATE LOCKS (Reversible) Swinging Gate Locks Standard Features Easily reversible Case, cast aluminum 3-5/8" x 6-1/4" x 1" Groove: 1/2" wide x 3/16" deep, all sides for wire gate insertion 5 pin cylinder(s) Lock only, no keeper furnished Single Cylinder Model *With cylinder Suffix K Add $29 Double Cylinder Model *With cylinders Suffix M Add $58 MODEL # LATCH PROJECTION US PAT.#4,875,725 NO FALL OUT FEATURE: Parts will not fall out when cover is removed. Replaces Multilock gate locks. CHANNEL SIZE LESS CYL. * WT. / LBS. 12 / CASE W3700 1-1/8" 1/2" 116 19 W3710 1-1/4" 5/8" 116 19 W3720 1-3/8" 3/4" 116 19 W3730 1-7/8" 1-1/4" 132 19 W3750 1-1/8" 1/2" 163 20 W3760 1-1/4" 5/8" 163 20 W3770 1-3/8" 3/4" 163 20 W3780 1-7/8" 1-1/4" 180 20 Sliding Gate Locks Standard Features Easily reversible Case, cast aluminum 3-5/8" x 6-1/4" x 1" Groove: 1/2" wide x 3/16" deep, all sides for wire gate insertion 5 pin cylinder(s) Lock only, no keeper furnished Single Cylinder Model *With cylinder Suffix K Add $29 Double Cylinder Model *With cylinders Suffix M Add $58 Packed MODEL # HOOK CHANNEL LESS WT. / LBS. GAP SIZE CYL. * 12 / CASE W3800.825" 1/2" 116 20 W3810.950" 5/8" 116 21 W3820 1.075" 3/4" 116 20 W3830 1.625" 1-1/4" 132 21 W3850.825" 1/2" 163 21 W3860.950" 5/8" 163 21 W3870 1.075" 3/4" 163 21 W3880 1.625" 1-1/4" 180 21 Packed Gate Locks Parts W3703 W3704 W3705 WA3806 to WA3836 WA3715 to WA3745 9005 2122 E2108 WA3706 WA9251 1083 Custom nameplate available. Consult factory. W3701 WA9293 (Use w/ W3791 or W3891) L H W3708 W3751 WA9253 W3791 W3891 W3892 PART # DESCRIPTION PRICE 1083 Retainer/fork screw.50 2122 Mortise cylinder 32 E2108 Cylinder Set Screw.50 9005 Case screw.50 W3701 Cover 32 W3703 Case 50 W3704 Fork 4 W3705 Latch lever 3 W3708 Turnpiece 17 W3751 Double cylinder collar with set screw 32 W3791 Lever stop plate - Swinging gate lock (w/ W3892) 9 W3891 Lever stop plate - Sliding gate lock (w/ W3892) 9 W3892 Lever slide cover 1 WA3706 Latch adapter 9 WA3715 Latch assembly - 1-1/8" projection 25 WA3725 Latch assembly - 1-1/4" projection 25 WA3735 Latch assembly - 1-3/8" projection 25 WA3745 Latch assembly - 1-7/8" projection 32 WA3806 Hook assembly -.825" gap 32 WA3816 Hook assembly -.950" gap 32 WA3826 Hook assembly - 1.075" gap 32 WA3836 Hook assembly - 1.625" gap 41 WA9251 Exterior knob assembly 66 WA9253 Interior knob assembly 66 WA9293 Interior lever assembly (with W3791 & W3891) 97 122

CUSTOM LOCKSET DIVISION MARKS USA was established in 1977 to serve a growing demand for a mortise lock manufacturing company who would satisfy the needs of an expanding market. Since then, the product line has grown to include residential and commercial locksets to meet and exceed the most stringent UL and ANSI/BHMA specifications. In 1989, the Custom Lockset Division was created to accommodate customers with special requirements of either lock function or design. Thus far, custom locksets have been developed for: Schools Housing Authorities Hospitals Residential High Rise Projects as well as other municipal and commercial applications. The following pages are specification sheets of the various custom locksets developed to accommodate our customers needs. This is only a sampling of our solutions. Custom Locksets We, at the Custom Lockset Division, welcome the opportunity to respond to special applications requiring a custom engineered lock product. We look forward to the challenge. Meets ADA requirements Crafted With Pride In The USA 123

SERIES 91 CUSTOM LOCK DIVISION METRO ENTRANCE MORTISE LOCKSET FINISH SERIES 91 GROUPS MARKS # FUNCTION ANSI # 3 26D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VESTIBULE 124 135 DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 124 135 F DORMITORY F12 141 152 PIN/KNOB KIT K91P/3 For 1-3/4" Door thickness 21 23 Packed For pricing, availability and minimum quantities, consult factory Trim Specifications: Exterior: Steel reinforced brass plates with cylinder recess, 10" x 2-3/4". Polished brass finish (US 3). Wrought brass, knob, 2-1/4" diameter with two set screws. Two piece 9/32" steel swivel spindle. Interior: Steel reinforced plate 7" x 2-1/4". Polished brass finish (US 3). Wrought brass knob, 2-1/4" diameter with two set screws. Cylinder: 1-1/8" long solid brass, 6 pin with 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-5/8" to 2-1/4" standard. Lock Specifications: 9 Series (2-1/2" Backset) Custom Locksets K91P/3 Pin/Knob Kit OPTIONS CODE PRICE 91 Series Supplied with A7 32 Pinned Outside Knob 1. Lock Front: 7-5/8" x 1-1/16" x 3/16" thick. Optional Front 8" x 1-1/4" steel backplate with brass cover plate. 2. Deadbolt: Cast 1" throw, steel reinforced. 3. Latch: Solid brass, 1/2" throw (reversible). 4. Rocker Switch: Locks or unlocks exterior lever. 5. Hub Lock Arm: (to lock hub) Steel 1/8" thick. 6. Hubs: 9/32" on square. 7. Case: High pressure cast Zamac, baked powder coat finish. 124

SERIES 114 CUSTOM LOCK DIVISION METRO ENTRANCE MORTISE LOCKSET FINISH SERIES 114 GROUPS MARKS # FUNCTION ANSI # 3 26D KEYED SINGLE CYLINDER, NO DEADBOLT D OFFICE VESTIBULE 124 135 DW VESTIBULE KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 124 135 F DORMITORY F12 141 152 Packed For pricing, availability and minimum quantities, consult factory Trim Specifications: Standard Exterior and Interior Trim: Thru bolted knob/plate assemblies integrate and align with lock body. Exterior: Steel reinforced brass plate with cylinder recess, 10" x 2-3/4". Polished brass finish (US 3). Wrought brass screwless knob, 2-1/4" diameter with integral spring loaded 9/32" spindle. Two thru-posts pass through lock body. Interior: Steel reinforced plate 7" x 2-1/4". Polished brass finish (US 3). Wrought brass screwless knob (US 3), 2-1/4" diameter with integral spring loaded 9/32" spindle. Mounting bolts (#10-32) engage thru-posts of exterior trim assembly. Cylinder: 1-1/8" long, 6 pin with 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Lock Specifications: 9 Series (2-1/2" Backset) 1. Lock Front: 7-5/8" x 1-1/16" x 3/16" thick. Optional Front 8" x 1-1/4" steel backplate with brass cover plate. 2. Deadbolt: Cast 1" throw, steel reinforced. 3. Latch: Solid brass, 1/2" throw (reversible). 4. Rocker Switch: Locks or unlocks exterior lever. 5. Hub Lock Arm: (to lock hub) Steel 1/8" thick. 6. Hubs: 9/32" on square with steel security separator. 7. Case: High pressure cast Zamac, baked powder coat finish. Custom Locksets 125

SERIES BE101 & LA118 CUSTOM LOCK DIVISION MAXIMUM SECURITY MORTISE LOCKSET SERIES BE101 & LA118 MARKS # FUNCTION ANSI # 32D 3, 10, 10B KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VESTIBULE VESTIBULE E OFFICE F04 EW STOREROOM F07 GL INST. PRIVACY F26 620 662 J CLASSROOM F05 Custom Locksets 126 JM, JR HOSPITAL (HOLDBACK) F06 EL EU ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPEC. PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTION F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 FX DORMITORY F33 KEYLESS 576 1055 630 672 659 701 659 701 659 701 N PASSAGE F01 569 611 L BATHROOM F02 LF PRIVACY F19 607 649 LJ PRIVACY F22 645 687 EX EXIT F31 620 662 DUMMY TRIM DI, DO DUMMY TRIM INSIDE/OUTSIDE 249 271 DT DUMMY TRIM 543 541 OPTIONS CODE PRICE BE 1-1/2" thick for adapter plate A19 62 Spacer kit for 1-1/2" thick door K9311 62 For pricing, availability and minimum quantities, consult factory. Performance Specifications: Life Test: 1,500,000 cycles minimum. Strength Test: When abusive torque is applied to exterior lever, lockset remains locked. (Abusive torque may cause spindle failure. However, lockset remains locked. When spindle is replaced, lockset is fully operational.) ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000, Grade 1. Fire Test: UL listed, 3 hour fire rated. Meets ADA requirements. Trim Specifications: Exterior and Interior Trim: Brushed stainless steel plate assemblies with machined lever bearings. Screwless stainless steel levers assembled to plate with hardened snap rings. (Levers cannot be removed without disassembling trim plates from inside.) Exterior: 4 welded thru-posts. Center posts pass through lock body, automatically aligning trim 8-1/2" x 2-3/4" x 1/8" thick. Interior: 4 stainless steel, tamper-proof mounting bolts connecting inside plate, 8-1/2" x 2-3/4" x 1/8" thick. Cylinder: 1-1/8" long solid brass, 6 pin with 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-3/4" standard. Extended range available. Consult factory for 2 SPACER KITS ARE NEEDED optional finishes. BE101 Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick, with tamper-proof screws. 2. Deadbolt: Stainless steel with hardened roll pins, 1" throw. (not shown) 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary Deadlatch: 1/2" throw (reversible). 5. Case: Stamped steel 1/16" thick. 6. Hubs: Steel, 5/16" on square w/security separator, 9/32" on diamond. 7. Independent exterior and interior lever support springs. 8. Hub Lock Arm: Steel 1/8" thick (to lock hub.) 9. Exterior Lever Override Guard Integral cam spindle/ spring assembly engages hub lock arm, case hardened steel, 1/8" thick. 9A. Interior Lever Override Guard Integral cam spindle/spring assembly prevents interior lever override, case hardened steel, 1/8" thick. LA118

SERIES HA112 CUSTOM LOCK DIVISION HOUSING AUTHORITY MORTISE LOCKSET SERIES HA112 FINISH GROUPS MARKS # FUNCTION ANSI # 20A KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VESTIBULE VESTIBULE E OFFICE F04 EW STOREROOM F07 399 GL INST. PRIVACY F26 J CLASSROOM F05 JM, JR HOSPITAL (HOLDBACK) F06 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED 840 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 409 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 442 LH SPEC. PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 GC INTRUDER LATCHBOLT F32 442 WW INSTITUTION F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 442 FA DORMITORY F11 FX DORMITORY F33 KEYLESS N PASSAGE F01 341 L BATHROOM F02 LF PRIVACY F19 383 Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000, Grade 1. Fire Test: UL LISTED, 3 hour fire rated. Trim Specifications: Barrier THRU-Bolted steel knob/plate assemblies with brass machined knob bearings. Screwless, heavy duty, steel reinforce knobs, 2-1/4" diameter, fastened to plate with hardened snap rings. Integral spring loaded 9/32" spindles (no set screws). Dark bronze powder coated finish. Exterior: Wrought steel knob/plate assembly. 10-1/8" x 4" x 5/64", with 3 concealed welded thru-posts. Center post brace lock body for proper alignment in 1-3/4" thick door. Plate covers cylinder with only the keyway exposed. Optional Exterior: Plate prepared for IC core cylinder. Interior: Flat steel knob/plate assembly. 10-3/4" x 3-1/8" x 3/32" thick with 3 each 1/4"-20 mounting bolts. Center bolt passes through lock body to integrate trim with lock. Cylinder: 1-1/8" long, 6 pin, solid brass with spacing collar concealed under exterior Barrier plate; 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-3/4" standard. Extended range available. Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick. 2. Deadbolt: Stainless steel w/ hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary deadlatch: 1/2" throw (reversible). 5. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator. 6. Hub Follower: (to lock hub) steel 1/8" thick 7. Case: Stamped steel 3/32" thick, zinc dichromate finish. 8. Spindles: Independent spring-loaded spindles, 9/32" square. Custom Locksets LJ PRIVACY F22 401 EX EXIT F31 399 For pricing, availability and minimum quantities, consult factory 127

SERIES HA113 CUSTOM LOCK DIVISION HOUSING AUTHORITY MORTISE LOCKSET Custom Locksets SERIES HA113 FINISH GROUPS MARKS # FUNCTION ANSI # 20A KEYED SINGLE CYLINDER, NO DEADBOLT D DW OFFICE VESTIBULE VESTIBULE E OFFICE F04 EW STOREROOM F07 GL INST. PRIVACY F26 J CLASSROOM F05 JM, JR HOSPITAL (HOLDBACK) F06 EL ELECTRICALLY LOCKED EU ELECTRICALLY UNLOCKED KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 B ENTRANCE F21 F DORMITORY F12 FS DORMITORY FW DORMITORY F13 FD APARTMENT F20 H HOTEL F15 LH SPEC. PRIVACY KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 GC INTRUDER LATCHBOLT F32 WW INSTITUTION F30 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 C STOREROOM F14 FC INTRUDER DEADBOLT F34 FA DORMITORY F11 For pricing, availability and minimum quantities, consult factory 447 890 459 491 491 491 FX DORMITORY F33 KEYLESS N PASSAGE F01 391 L BATHROOM F02 LF PRIVACY F19 432 LJ PRIVACY F22 475 EX EXIT F31 447 Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000, Grade 1. Fire Test: UL LISTED, 3 hour fire rated. Meets ADA requirements. Trim Specifications: Barrier THRU-Bolted steel lever/plate assemblies with brass machined lever bearings. Screwless, forged, American levers, 4-1/2" long, to meet ADA requirements, fastened to plates with hardened snap rings. Spring loaded 5/16" spindles (no set screws). Dark bronze powder coated finish. Exterior: Wrought steel lever/plate assembly. 10-1/8" x 4" x 5/64", with 3 concealed welded thru-posts. Center post braces lock body for proper alignment in 1-3/4" thick door. Plate covers cylinder with only the keyway exposed. Optional Exterior: Plate prepared for IC core cylinder. Interior: Flat steel lever/plate assembly. 10-3/4" x 3-1/8" x 3/32" thick with 3 each 1/4"-20 mounting bolts. Center bolt passes through lock body to integrate trim with lock. Cylinder: 1-1/8" long, 6 pin, solid brass with spacing collar concealed under exterior Barrier plate; 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-3/4" standard. Extended range available. Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick. 2. Deadbolt: Stainless steel w/ hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary deadlatch: 1/2" throw (reversible). (not shown) 5. Hubs: Steel, 9/32" on diamond, 5/16" on square w/ security separator. 6. Independent exterior and interior lever support springs. 7. Hub Follower: (to lock hub) steel 1/8" thick. 8. Hub Stop: (to limit lever travel) steel 1/8" thick. 9. Case: Stamped steel 3/32" thick, zinc dichromate finish. 10. Spindles: Independent spring-loaded spindles, 5/16" square. 128

SERIES HPD124 CUSTOM LOCK DIVISION HOUSING DEVELOPMENT MORTISE LOCKSET For Pricing, Finishes, Availability and Minimum Quantities, Consult Factory. Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000, Grade 1. Fire Test: UL LISTED, 3 hour fire rated. Trim Specifications: Knob/Plate Assemblies: Solid stainless steel or brass plates, 8-1/2" x 2-3/4" x 1/4" thick. Screwless, heavy duty, steel reinforced stainless steel or brass knobs, assembled to plate with hardened snap rings. (Knobs cannot be removed without disassembling trim plates from inside.) Integral, spring loaded 9/32" spindles. Exterior: 3 welded thru-posts. Center post passes through lock body, automatically aligning trim. Interior: 3 stainless steel, tamper-proof mounting bolts. Cylinder: Concealed 6-pin, solid brass 1-1/8" long, with 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-3/4" standard. Extended range available. Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16". 2. Deadbolt: Stainless steel w/ hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary deadlatch (not shown): 1/2" throw, (no reversing necessary if specified). 5. Rocker Switch: Locks or unlocks exterior knob. 6. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator. 7. Hub Lock Arm: (to lock hub) hardened steel 1/8" thick 8. Case: Stamped steel 3/32" thick. 9. Spindles: Independent spring-loaded spindles, 9/32" square. Custom Locksets 129

SERIES HPD125 CUSTOM LOCK DIVISION HOUSING DEVELOPMENT MORTISE LOCKSET For Pricing, Finishes, Availability and Minimum Quantities, Consult Factory. 11 Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000, Grade 1. Fire Test: UL LISTED, 3 hour fire rated. Meets ADA requirements. Trim Specifications: Lever/Plate Assemblies - Solid stainless steel 8-1/2" x 2-3/4" x 1/4" thick. Screwless solid stainless steel levers assembled to plate with hardened snap rings. (Levers cannot be removed without disassembling trim plates from inside.) Integral spring loaded 9/32" spindles. Exterior: 3 welded thru-posts. Center post passes through lock body, automatically aligning trim. Interior: 3 stainless steel, tamper-proof mounting bolts. Cylinder: Concealed 6 pin, solid brass 1-1/8" long, with 2 keys. Custom Locksets Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-3/4" standard. Extended range available. Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick. 2. Deadbolt: Stainless steel w/ hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with steel antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary deadlatch (not shown): 1/2" throw (no reversing necessary if specified). 5. Rocker Switch: Locks or unlocks exterior lever. 6. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator. 7. Hub Lock Arm: Steel 1/8" thick. 8. Hub Stop: (to limit lever travel) steel 1/8". 9. Independent Exterior and Interior lever support springs. 10. Case: Stamped steel 3/32" thick. 11. Spindles: Independent spring-loaded spindles, 9/32" square. 130

SERIES HPD128 CUSTOM LOCK DIVISION HOUSING DEVELOPMENT MORTISE LOCKSET For Pricing, Finishes, Availability and Minimum Quantities, Consult Factory. Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000,Grade 1. Fire Test: UL LISTED, 3 hour fire rated. Trim Specifications: Thru-Bolted brass knob/plate assemblies. Screwless brass knobs with self-contained spindles. Cylinder recesses into exterior plate. Polished brass finish. Knobs: Brass, steel reinforced, round 2-1/4" diameter with self-contained spring-loaded 9/32" solid steel spindle. Exterior: Brass plate with steel reinforcement, 10" x 2-3/4", with two thru-posts (aligned for complete reversibility), pass through lock body. Screwless knob attached to plate with hardened snap ring (no set screws). Interior: Brass plate with steel reinforcement, 7" x 2-1/4" with turnpiece (if required). Screwless knobs attached to plate with hardened snap ring (no set screws). Two mounting bolts engage exterior thru-posts. Cylinder: 6 pin cylinder, solid brass, 1-1/8" long with 2 keys. Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Door Thickness: 1-3/4" standard. Extended range available. Custom Locksets Lock Specifications: 55 Series (2-1/2" Backset) 1. Lock Front: 7-5/8" x 1-1/16", adjustable bevel steel backplate with solid brass cover plate. 2. Deadbolt: Stainless steel w/ hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Rocker Switch: Locks or unlocks exterior knobs. 5. Hub Lock Arm: Steel 1/8" thick 6. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator. 7. Case: Stamped steel 3/32" thick. 8. Spindles: Independent spring-loaded spindles, 9/32" square. 131

SERIES LI134 CUSTOM LOCK DIVISION DOUBLE LOCK ENTRY MORTISE LOCKSET For Pricing, Finishes, Availability and Minimum Quantities, Consult Factory. Custom Locksets Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2002 for series 1000, Grade 1. Fire Test: UL Listed, 3 hour fire rated. Meets ADA requirements. Trim Specifications: Exterior and Interior Trim: Mirror polished brass or stainless steel plate assemblies with machined lever bearings. Screwless solid forged brass or stainless steel levers assembled to plate with hardened snap rings. (Levers cannot be removed without disassembling trim plates from inside.) Exterior: 2 welded thru-posts. 17" x 3" x 1/4" thick with engraved numbers or letters. Interior: 3 mounting bolts. Cylinder: 1-1/8" long solid brass 6 pin with 2 keys. Lock Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip. Conforms to ANSI spec., A115.1. Deadbolt Strike: 3-1/8" x 1-1/8" x 3/32" thick. Door Thickness: 1-3/4" standard. Extended range available. Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick. 2. Deadbolt: Stainless steel w/ hardened roll pins, 1" throw. 3. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 4. Auxiliary deadlatch: 1/2" throw. (not shown) 5. Case: Stamped steel 3/32" thick. 6. Rocker Switch: Locks or unlocks exterior lever. 7. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator. 8. Independent exterior and interior lever support springs. 9. Hub Lock Arm: (to lock hub) Steel 1/8" thick. 10. Hub Stop: (to limit lever travel) Case hardened steel 1/8". 11. Spindles: Independent spring-loaded spindles, 5-1/6" square. Deadbolt Specifications: 3 Series (2-3/4" backset) 12. Lock Front: Adjustable bevel steel backplate 1-1/16" x 4-5/8" x 3/32" thick. Cover plate 1/16" thick. 13. Deadbolt: Cast, full 1" throw. 14. Case: Pressure cast alloy. 132

SERIES SS50 CUSTOM LOCK DIVISION INSTITUTIONAL LIFE SAFETY MORTISE LOCKSET SERIES 5 & 55 SS50 FINISH GROUPS MARKS # FUNCTION ANSI # 26D KEYED SINGLE CYLINDER, NO DEADBOLT EW STOREROOM F07 1062 EL ELECTRICALLY LOCKED 1346 KEYED SINGLE CYLINDER, WITH DEADBOLT A ENTRANCE F08, F10 1219 FD APARTMENT F20 1239 KEYED DOUBLE CYLINDER, NO DEADBOLT G ENTRANCE F09 1089 WW INSTITUTION F30 1089 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC ENTRANCE F35 1089 KEYLESS N PASSAGE F01 1027 L BATHROOM F02 1203 LJ PRIVACY F22 1229 DUMMY TRIM DI DUMMY TRIM INSIDE 465 DT DUMMY TRIM 930 * Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. Function F09: ANSI F09 modified function with inside/outside key cylinders. Both inside and outside knob can be left in passage mode. Turning key from either side locks both knobs. 2-3/4" 2-1/16" Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2005 for series 5000, Grade 1. Fire Test: UL Listed, 3 hour fire rated. Trim Specifications: Exterior and Interior Trim: Solid brushed chrome interior and exterior trim including finger indented safety knobs which recess into solid brass through-bolted roses. Exterior: Solid brass rose secured to inside trim with two #10-32 bolts with recess for safety knob. Exterior safety knob with captivated spindle and grooved bearing secured to exterior rose by two 8-32 set screws. Interior: Safety knob with captivated spindle secured to solid rose by hardened retainer ring through needle bearing. Rose has two 10-32 threaded studs which pass through the mortise lock to provide for through-bolted assembly to exterior trim. Tapered and grooved interior turnknob assembly (if required) with concealed mounting screws. Cylinder: Solid brass cylinders with solid brushed chrome security collars. Optional HI-SECURITY cylinders available. Strike: 4-7/8" curved lip stainless steel w/tamperproof screws. Door Thickness: 1-3/4" standard. Extended range available. Door Prep: ANSI A115.1 lock face cutout, with 2-1/8" through hole for knob/rose assembly. Backset: 5 Series 2-3/4" standard, 55 Series 2-1/2" optional Lock Specifications: 5 Series (2-3/4" Backset) 1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick. Cover plate 1/16" thick with tamper proof screws. 2. Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible). 3. Auxiliary deadlatch: 1/2" throw, (reversible). 4. Case: Stamped steel 3/32" thick, zinc dichromate finish. 5. Hubs: Steel, 9/32" on diamond, 5/16" on square w/security separator. 6. Hub Lock Arm: (to lock hub) Steel 1/8" thick. 7. Spindles: Independent spring-loaded spindles. Institutional Life Safety Function F22: ANSI F22 Latch by lever either side except when outside lever is locked by inside turnpiece. Turning inside lever or closing door unlocks outside lever. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available. 2-3/4" 2-1/16" 133

SERIES 1SS50 CUSTOM LOCK DIVISION INSTITUTIONAL LIFE SAFETY CYLINDRICAL LOCKSETS 1SS50N shown Institutional Life Safety SERIES 1SS50 FINISH GROUPS MARKS # FUNCTION ANSI # 26D KEYED SINGLE CYLINDER, WITH DEADBOLT K CYLINDER x KNOB E0121 979 KEYLESS N PASSAGE F75 927 * 1SS50K shown Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. SERIES 31SS50 2-9/16" 2-3/4" 2-1/16" 15/16" 2-1/16" FINISH GROUPS MARKS # FUNCTION ANSI # 26D KEYED SINGLE CYLINDER, WITH DEADBOLT 1SS50K Dimensions 1SS50N Dimensions SERIES 31SS50 CUSTOM LOCK DIVISION INSTITUTIONAL LIFE SAFETY MORTISE DEADLOCK S CLASSROOM E06091 410 * Standard & HI-SECURITY IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY, Medeco, KeyMark, Falcon, Schlage small format & Best. IC Core Tailpieces ARE Included. Function E06091: Deadbolt by outside key. Interior safety knob will retract but not project deadbolt. Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.2-2003 for series 1000, Grade 1. Fire Test: UL Listed, 3 hour fire rated. 1SS50N Cylindrical Lockset: ANSI F75 Passage Latch by knob either side, always open. Strike: #1136, 2-3/4" T strike Door Prep: ANSI 115.2 Latch: ANSI 156.2, Grade 1, UL Listed, 3 Hour fire rated Backset: 2-3/4" Backset standard, 2-3/8" backset optional Latch Face: 1-1/8" x 2-1/4" with tamper proof screws. Latch Throw: 9/16" 1SS50K Cylindrical Deadlatch Lockset: ANSI E0121 Cylinder X Knob Latch by knob inside, key outside. Strike: #1136, 2-3/4" T strike; #1135 4-7/8" ASA strike optional Door Prep: ANSI 115.2 Latch: ANSI 156.2, Grade 1, UL Listed, 3 Hour fire rated Door Thickness: 1-3/4" Backset: 2-3/4" Backset Latch Face: 1-1/8" x 2-1/4" with tamper proof screws. Cylinder: Solid brass cylinder, 6-pin, C keyway Optional HI-SECURITY cylinders available. Unitized cylinder/security collar assembly for 2-1/8" bore Thru-bolted knob assembly, 2 each 1/4" bolts thru latch 3" Performance Specifications: Life Test: 1,500,000 cycles minimum. ANSI Test: Meets or exceeds all operational and security tests of ANSI / BHMA Certified A156.5-2001 for series 31, Grade 1. Fire Test: UL Listed, 3 hour fire rated. Trim Specifications: Interior Trim: Solid brushed chrome interior trim including finger indented safety knobs which recess into solid brass through-bolted roses. Series 31 Deadlock Specifications: Backset: Series 31: 2-3/4" Bolt throw: 1" stainless steel with hardened roll pins Case: Stamped Steel Front: 1-1/16" x 4-5/8" adjustable bevel Cylinder: Solid brass cylinder, 6-pin, C keyway, 2 keys. Optional HI-SECURITY cylinders available. Strike: #4035 Included 134

SERIES PD CUSTOM LOCK DIVISION HOSPITAL CYLINDRICAL & MORTISE PUSH/PULL ANSI-A156.2 Grade 1 3 Hour Fire Rating MARKS # TRIM FUNCTION ANSI # SERIES 1 32D KEYLESS N PD PASSAGE F75 250 Standard Features Backset: 2-3/4" standard, 2-3/8" and 5" optional Strike: #1136, 2-3/4" T strike; #1135 4-7/8" ASA strike optional Door Thickness: 1-3/4", self adjusting for thicker doors Non-Handed Lead lining and engraving available Government standard #161 Functional, modern design with variable mounting positions Short throw angle allows for easy push/pull action to open doors even when hands are not free Standard 32D finish, Consult factory for available finishes Universal assemblies can be push/pull vertical up or down Easily reversible configuration for push or pull styles MARKS # TRIM FUNCTION ANSI # SERIES 5, 55 32D KEYED SINGLE CYLINDER, NO DEADBOLT EW PD STOREROOM F07 635 ANSI-A156.13 Grade 1 3 Hour Fire Rating EL PD ELECTRICALLY LOCKED 919 KEYED SINGLE CYLINDER, WITH DEADBOLT A PD ENTRANCE F08, F10 642 FW PD DORMITORY F12 642 FD PD APARTMENT F20 662 H PD HOTEL F15 662 KEYED DOUBLE CYLINDER, NO DEADBOLT G PD ENTRANCE F09 662 WW PD INSTITUTION F30 662 KEYED DOUBLE CYLINDER, WITH DEADBOLT AC PD ENTRANCE F35 662 C PD STOREROOM F14 662 KEYLESS N PD PASSAGE F01 660 L PD BATHROOM F02 644 LJ PD PRIVACY F22 652 Institutional Life Safety Standard Features Backset: 5 Series 2-3/4", 55 Series 2-1/2" Strike: #9035, 4-7/8" ASA curved lip strike Door Thickness: 1-3/4", self adjusting for thicker doors Non-Handed Lead lining and engraving available Government standard #161 Functional, modern design with variable mounting positions Short throw angle allows for easy push/pull action to open doors even when hands are not free Standard 32D finish, Consult factory for available finishes Universal assemblies can be push/pull vertical up or down Easily reversible configuration for push or pull styles 135

I-QUE SERIES ELECTRONIC ACCESS CONTROL STANDARD FEATURES Standard i-que Lockset Features CABLEGARD protects wiring Weatherproof -32 F to 155 F Easy installation 4 AA batteries included 16 position lifetime warrantied keypad Heavy duty solid die cast housing Audible and visible entry indicator First Manager / Supervisor to arrive Temporary users Panic alarm interface Secretary s button interface Fire Tower lock function Shielded electronics Privacy mode (input to lockout Keypad entry) Real time clock Can require multiple codes for access 3-10 digit user code Fully programmable by keypad or with use of a PC and i-dat software package (EXCLUDES METRO) Passage mode activated by user code, manually programmed or time activated (time activated NOT AVAILABLE ON METRO) Pin only Terminator on/off Built-in relay Lifetime mechanical & electronic warranty IQ_K * Series Features Keypad programmable 32 User capability 8 Programmable holidays No audit trail Marks C keyway, 2 keys Standard IQK* Series Features Installs into a standard electrical box, or can be wall mounted IQK* (Keypad) 320 users 1600 event audit trail On-The-Door upgradeable memory IQKP* (Keypad Prox) HID proximity version available 3008 user codes, 1180 event Audit trail Accepts HID cards & fobs in 26, 33 & 37 format Access granted by keypad only, card only or a combination of keypad & card for higher security. IQ_K* Series Features Multiple key depression capabilities 320 User capability 1,600 Event audit trail with i-dat module 160 Scheduled events 32 Programmable holidays On-The-Door upgradeable memory Multiple code entries for max security Full scheduling features Keypad or computer programmable with i-dat module Scheduled / Manual passage mode HI-SECURITY Cylinder Standard Access Control IQ_KP* Prox Series Features Accepts HID cards and fobs in 26, 33, and 37 format 3008 User Capability 1,180 Event Audit Trail with i-dat module 1,600 Scheduled Events 56 Programmable Holidays Full Scheduling Features HI-SECURITY Cylinder Standard IQ_KK* Double Sided Series Features Multiple key depression capabilities 320 Users upgradeable to 3000 1,600 Event audit trail with i-dat module 160 Scheduled events 32 Programmable holidays On-The-Door upgradeable memory Full scheduling features 4 Security screws Plastic installation template supplied HI-SECURITY Cylinder Standard 136

I-QUE SERIES ELECTRONIC ACCESS CONTROL TECHNICAL SPECS IQ1K Series Cylindrical Lockset Standard Features Grade 1 Cylindrical Survivor Crescent style levers Standard on IQ_K* Series and IQ_KP* Series, American style levers available American style levers Standard on IQ_K* METRO Series, Crescent style levers available The Clutch for trouble free service Latch: Grade 1, 3 hr. UL fire rating, reversible, with 9/16" throw, 2-3/4" backset (EXCLUDES METRO); METRO Latch: Grade 1, 3 hr. UL fire rating, reversible, with 9/16" throw, 2-3/4" backset Strike: 4-7/8" ASA strike (EXCLUDES METRO); METRO Strike: 2-3/4" T strike Door Thickness: 1-3/4" standard Handing: Non-handed Key override: Marks C 6 pin, with 2 keys std. or IC core housing optional. HI-SECURITY cylinder standard (EXCLUDES METRO) FOR THICKER DOORS, CONSULT FACTORY (EXCLUDES METRO) IQ2K Series Mortise Lockset & IQ2KK Series Double Sided Mortise Lockset Standard Features Grade 1, Series 5, Standard Entry Function, 3 hr. UL fire rating, 2-3/4" backset (STANDARD ON METRO) Crescent style levers Standard on IQ_K* Series, IQ_KK* Series and IQ_KP* Series, American style levers available American style levers Standard on IQ_K* METRO Series, Crescent style levers available The Clutch for trouble free service Latch: 3/4" anti-friction throw Auxiliary Latch: 1/2" throw Strike: 4-7/8" ASA std. Bolt Throw: 1" with optional function. Door Thickness: 1-3/4" to 1-7/8" standard Handing: Field reversible Hubs: Steel, 5/16" square w/ security separator Key override: 1-1/8" mortise cylinder, Marks C with 2 keys standard, 1-3/8" IC core housing optional HI-SECURITY cylinder standard (EXCLUDES METRO) NOTE: IQ2KK Double Sided Mortise Lockset comes with two 1-1/8" HI-SECURITY mortise cylinders standard. Latch or latch/deadbolt function available with or without electronic lockout option, See pages 147 & 150. (EXCLUDES METRO) IQ3KK Series Cartridge Lockset Standard Features Grade 1, Series Cartridge lockset Crescent style levers Standard, American style levers available The Clutch for trouble free service Latch: Grade 1, Series 1 cylindrical cartridge, 9/16" throw, 2-3/4" backset Strike: 4-7/8" ASA strike Door Thickness: 1-3/4" standard; FOR OTHER DOOR THICKNESS, CONSULT FACTORY Handing: Non-handed Key override: Two (2) 1-1/8" mortise cylinders, Marks C with 2 keys standard, optional 1-3/8" IC core housing HI-SECURITY cylinder standard IQ7K Series Rim Exit Device Interface Lockset Standard Features Crescent style levers Standard on IQ_K* Series and IQ_KP* Series, American style levers available American style levers Standard on IQ_K* METRO Series, Crescent style levers available Door Thickness: 1-3/4" to 2-1/4" Handing: Non-handed The Clutch for trouble free service Key override: 1-1/8" mortise cylinder, Marks C with 2 keys standard, optional 1-3/8" IC core housing HI-SECURITY cylinder standard (EXCLUDES METRO) A single IQ7K* interface unit uses a choice of i-que adapter plates to operate most manufacturers rim exit devices. See page 146. Consult factory for additional models. Access Control 137

IQK* SERIES DIGITAL ACCESS CONTROL KEYPAD KEYPAD OR PROXIMITY CARD READER WITH KEYPAD STAND ALONE UNITS IQK/19*T IQKP/19*T DESCRIPTION LOCKSET TYPE KEYPAD # OF USERS AUDIT TRAIL EVENTS FINISH GROUPS * 19 CARTON QUANTITY IQK/19*T Digital Access Control Keypad Tactile Metal 320! 1600 " 384 16 IQKP/19*T Digital Access Control Keypad with Proximity Reader Tactile Metal 3,008 1180 " 782 16!Upgradeable Number of Users and Events. See page 145. " Audit Trail readout requires i-dat module. See page 146. * For Special Finishes Consult Factory HOW TO ORDER IQK* SERIES LOCK SETS Access Control 1 2 4 5 6 IQ Keypad Type / Finish * Keypad - Options Number Alpha Slash Alpha-Num Star Alpha Dash Alpha-Num IQ K - Keypad 19 T - Tactile KP - Keypad Prox Metal OPTIONS 138

IQ_K * SERIES STAND ALONE ACCESS CONTROL SIMPLE ACCESS CONTROL Cylindrical Lockset IQ1K/ * T shown Crescent Lever shown Mortise Lockset IQ2K/ 26D*T shown Crescent Lever shown Rim Exit Device Lockset IQ7K/ *T shown American Lever shown DESCRIPTION LOCKSET TYPE KEYPAD DESIGN # OF USERS ME Black w/26d Levers ME 26D US 26D w/26d Levers CARTON QUANTITY IQ1K/ *T Cylindrical Tactile Metal 32 564 642 4 IQ1K/ *F Cylindrical Flush 32 564 642 4 IQ2K/ *T Mortise Tactile Metal 32 840 918 4 IQ2K/ *F Mortise Flush 32 840 918 4 IQ7K/ *T IQ7K/ *F Rim Exit Device Interface Tactile Metal 32 743 804 6 Rim Exit Device Interface Flush 32 743 804 6 For IQ7K Back Plates, see page 146. For options and accessories see pages 145-146 HOW TO ORDER SERIES LOCK SETS 1 2 3 4 5 6 IQ Lockset Type K / Finish * Keypad - Options Number Number Alpha Slash Alpha-Num Star Alpha Dash Alpha-Num IQ 1 - Cylindrical K - Keypad 2 - Mortise 7 - Rim Exit Device Interface 26D F - Flush T - Tactile Metal OPTIONS Access Control See Pages 145 & 146 for Options & Accessories 139

IQ_K* SERIES STAND ALONE ACCESS CONTROL SMART ACCESS CONTROL Cylindrical Lockset IQ1K/26D*T shown Crescent Lever shown Mortise Lockset IQ2K/19*T shown Crescent Lever shown Rim Exit Device Interface IQ7K/26D*T shown Crescent Lever shown DESCRIPTION LOCKSET TYPE KEYPAD # OF USERS AUDIT TRAIL EVENTS 19 26D 3, 10B, 26 (w/ 26D Levers) CARTON QUANTITY IQ1K/ *T Cylindrical Tactile Metal 320! 1,600 " 672 750 821 4 IQ1K/ *F Cylindrical Flush 320! 1,600 " 672 750 821 4 IQ2K/ *T Mortise Tactile Metal 320! 1,600 " 948 1025 1097 4 IQ2K/ *F Mortise Flush 320! 1,600 " 948 1025 1097 4 IQ7K/ *T Rim Exit Device Interface Tactile Metal 320! 1,600 " 851 913 966 6 IQ7K/ *F Rim Exit Device Interface Flush 320! 1,600 " 851 913 966 6!Upgradeable Number of Users and Events. See page 145. " Audit Trail readout requires i-dat module. See page 146.! Special finishes consult factory. For IQ7K Back Plates, see page 146. For options and accessories see pages 145-146 HOW TO ORDER IQ_K* SERIES LOCK SETS HI-SECURITY STANDARD Access Control 1 2 3 4 5 6 IQ Lockset Type K / Finish * Keypad - Options Number Number Alpha Slash Alpha-Num Star Alpha Dash Alpha-Num IQ 1 - Cylindrical K - Keypad 3 F - Flush 2 - Mortise 10B T - Tactile 7 - Rim Exit Device 19 Metal Interface 26 26D OPTIONS See Pages 145 & 146 for Options & Accessories 140

IQ_KP* SERIES PROX STAND ALONE ACCESS CONTROL VERY SMART ACCESS CONTROL Cylindrical Lockset IQ1KP/19*T shown Crescent Lever shown Mortise Lockset IQ2KP/26D*T shown Crescent Lever shown Rim Exit Device Interface IQ7KP/26D*T shown Crescent Lever shown DESCRIPTION LOCKSET TYPE KEYPAD # OF USERS AUDIT TRAIL EVENTS 19 26D 3, 10B, 26 (w/26d Levers) CARTON QUANTITY IQ1KP/ *T Cylindrical Tactile Metal 3,008 1,180 " 1189 1266 1338 4 IQ1KP/ *F Cylindrical Flush 3,008 1,180 " 1189 1266 1338 4 IQ2KP/ *T Mortise Tactile Metal 3,008 1,180 " 1463 1542 1615 4 IQ2KP/ *F Mortise Flush 3,008 1,180 " 1463 1542 1615 4 IQ7KP/ *T Rim Exit Device Interface Tactile Metal 3,008 1,180 " 1368 1429 1483 6 IQ7KP/ *F Rim Exit Device Interface Flush 3,008 1,180 " 1368 1429 1483 6 " Audit Trail readout requires i-dat module. See page 145.! Special finishes consult factory. For IQ7K Back Plates, see page 146. For options and accessories see pages 145 & 146. HOW TO ORDER IQ_KP* SERIES LOCK SETS HI-SECURITY STANDARD 1 2 3 4 5 6 IQ Lockset Type KP / Finish * Keypad - Options Number Number Alpha Slash Alpha-Num Star Alpha Dash Alpha-Num IQ 1 - Cylindrical KP - Keypad 3 F - Flush 2 - Mortise & Proximity 10B 7 - Rim Exit Device Reader T - Tactile 19 Metal Interface 26 26D OPTIONS Access Control See Pages 145 & 146 for Options & Accessories 141

IQ_KK* SERIES DOUBLE SIDED STAND ALONE ACCESS CONTROL FOR CONTROLLED ENTRY INSIDE AND OUTSIDE Mortise Lockset IQ2KK/26D*T shown Crescent Lever shown Cartridge Lockset IQ3KK/26D*T shown Crescent Lever shown DESCRIPTION LOCKSET TYPE KEYPAD # OF USERS AUDIT TRAIL EVENTS 19 (w/26d Levers) 26D 3, 10B, 26 CARTON QUANTITY IQ2KK/ *T Mortise Tactile Metal 320! 1600 " 2144 2220 2293 4 IQ3KK/ *T Cartridge Tactile Metal 320! 1600 " 1867 1944 2016 4!Upgradeable Number of Users and Events. See page 145. " Audit Trail readout requires i-dat module. See page 146.! Special finishes consult factory. For options and accessories see pages 145 & 146. HI-SECURITY STANDARD HOW TO ORDER IQ_KK* SERIES LOCK SETS Access Control 1 2 3 4 5 6 IQ Lockset Type KK / Finish * Keypad - Options Number Number Alpha Slash Alpha-Num Star Alpha Dash Alpha-Num IQ 2 - Mortise KK - Double 3 T - Tactile 3 - Cartridge Sided Keypad 10B Metal 19 26 26D OPTIONS See Pages 145 & 146 for Options & Accessories 142

REQUEST TO EXIT (REX) CYLINDRICAL ELECTRIFIED LOCKSET Marks USA has developed the Grade 1 Survivor Series Cylindrical Lockset incorporating a Request to Exit (REX) switch in both Electrified and Storeroom functions. Activating the inside lever for egress initiates the built-in REX output, providing a momentary signal for the access control REX input, for alarm shunt during egress. ANSI-A156.2 Grade 1 3 Hour Fire Rating Featuring The Clutch Standard Features Backset 2-3/4" Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose. Levers: Solid cast Zamac (except 370) w/ 1/2" return. Rose: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts. Strike: #1135, 4-7/8" ASA curved lip strike. Door thickness: 1-5/8" to 1-7/8". * For 1-3/8" door use K1704 spacer. Cylinder: MARKS C keyway, 6 pin w/ 2 keys. Request to Exit Switch: Single pole, double throw, 3 amp, 125 AC, wired either normally open or normally closed Electrified functions - 100% duty cycle, 24 V/DC standard, supplied with bridge rectifier; 3 watts,.25amps 12V/DC Optional, Contact factory for additional options. EA195 American lever EA295 Crescent lever EA395 Monaco lever EA495 Titan lever LOCKSET & LEVER DESIGN EA195 American lever CON. CORE IC CORE FUNCTION ANSI # DESCRIPTION 26D 3, 4, 10, 10B, 26 444 504 EA295 Crescent lever Latch by lever inside. 444 504 F RF STOREROOM F86 EA395 Monaco lever Outside lever always locked. 444 504 EA495 Titan lever 444 504 EA195 American lever Outside always locked 604 664 EA295 Crescent lever electrically. ELECTRICALLY 604 664 FEL RFEL Open by key outside, EA395 Monaco lever LOCKED switch or loss of power. 604 664 EA495 Titan lever Latch by lever inside. 604 664 EA195 American lever 604 664 Outside always locked until EA295 Crescent lever FEU RFEU ELECTRICALLY unlocked by key or 604 664 EA395 Monaco lever UNLOCKED electrically energized. 604 664 Latch by lever inside. EA495 Titan lever 604 664 HOW TO ORDER REX LOCK SETS Packed 1 2 3 4 Lock Series Marks Function / Finish - Options Number Number Slash Alpha-Num Dash Alpha-Num LOCK SERIES EA195 EA295 EA395 EA495 MARKS FUNCTION F RFEL RF FEU FEL RFEU FINISH 3 4 10 10B 26 26D OPTIONS Electrified Locksets 143

ELECTRIFIED CYLINDRICAL & MORTISE LOCKSETS 95 Series Cylindrical Lockset Electrified Functions 100% Duty Cycle 24V AC/DC supplied with bridge rectifier FEL: Electrically Locked/ RFEL Electrically Locked with IC Core Outside always locked electrically. Open by key outside, switch or loss of power. Deadlocking latch by lever inside. Lever only. FEU: Electrically Unlocked/ Electrically Unlocked with IC Core Outside always locked until unlocked by key or electrically energized. Deadlocking latch by lever inside. Lever only. 195 American Lever 295 Crescent Lever SERIES 192, 295, 395, 495 COMMERCIAL CYLINDER IC CORE CYLINDER MARKS FUNCTION 26D 3, 4, 10, 10B, 26 395 Monaco Lever FEL RFEL ELECTRICALLY LOCKED FEU RFEU ELECTRICALLY UNLOCKED 485 545 495 Titan Lever Mortise Lockset Electrified Functions 5 Series Only 100% Duty Cycle 24V/DC supplied with bridge rectifier; 12V/DC Optional. EL: Electrically Locked Outside always locked electrically. Open by key outside, switch or loss of power. Auxiliary latch deadlocks latch. Inside always open. EU: Electrically Unlocked Outside always locked until unlocked by key or electrically energized. Auxiliary latch deadlocks latch. Inside always open. SERIES 5 OPTIONS MARKS FUNCTION CODE PRICE Auxiliary Latch E3 32 32D 3, 10, 10B, 32 2-3/8" Backset E6 NC Key Override Sensor W11 119 Electrified Locksets ELECTRICALLY LOCKED ELECTRICALLY UNLOCKED 663! 679! Request to EXit switch, Key Sensor & Bolt Sensor W13 357 Bolt Sensor W14 119 Latch Sensor W15 119! Lock Body Price ONLY. Due to numerous trim and finish options, please refer to pages 4-61. 144

I-QUE OPTIONS Cylindrical Mortise Cartridge Rim Exit Device Interface DESCRIPTION CODE PRICE IQ1K/ME IQ1K IQ1KP IQ2K/ME IQ2K IQ2KP IQ2KK IQ3KK IQ7K/ME IQ7K IQ7KP Electronic Features 512 Users/2208 Event Audit Trail U3 92 864 Users/3124 Event Audit Trail U4 92 1504 Users/2520 Event Audit Trail U5 92 3008 Users/1180 Event Audit Trail U6 92 Sensor array package W1 307 Hard Wire Prep W5 24 Privacy function Z10 153 Mortise Features Entry Deadbolt Z1 45 Intruder Deadbolt Z2 76 Classroom Deadbolt Z3 76 Lockout Entry Deadbolt Z4 150 Lockout Intruder Deadbolt Z5 180 Lockout Classroom Deadbolt Z6 180 Backset 2-3/8" Backset E6 NC 5" Backset E9 32 3-3/4" Backset E10 32 Series 55 Mortise Lock Body (2-1/2" bkst) W8 NC Levers Tactile Lever A1 50 Lever to accept Sargent conventional cyl. F8 17 Lever to accept Corbin conventional cyl. F9 17 Lever to accept Corbin IC Core 6 pin F12 25 Lever to accept Corbin IC Core 7 pin F13 25 Lever to accept Yale IC Core 6 pin F14 17 Lever to accept Yale IC Core 7 pin F15 17 Lever to accept Schlage IC Core 6 pin F19 17 Lever to accept Sargent IC Core F20 17 Lever to accept Medeco IC Core lg. format F21 17 American Lever W2 15 Std Std Std Monaco Lever W3 15 Solid Exterior Handle/no cylinder W4 NC Std Std Std Std Std Std Std Std Crescent Lever W7 15 Std Std Std Std Std Std Std Std Titan Lever W12 15 Cylinder IC Core Cylinder Housing G1 NC Less Cylinder G3 Deduct 15 Strike 4-7/8" ASA Strike S1 8 Std Std Std Std Std Std Std 2-3/4" T Strike S3 NC Std i-que Options Miscellaneous Tamper-proof Screws A3 9 Std Std Lead Lined IQ F22 383 Heavy Duty Knob W6 NC 145

I-QUE ACCESSORIES Cylindrical Mortise Cartridge Rim Exit Device Interface ACCESSORY PART # PRICE IQ1K/ME IQ1K IQ1KP IQ2K/ME IQ2K IQ2KP IQ2KK IQ3KK IQ7K/ME IQ7K IQ7KP Bridge rectifier (converts AC power to DC power) 1901 30 Gasket E1008 4 (interior inside housing for full weatherproofing) Bezel with screws E1010 15 Battery Pack Holder EA4011 30 Spacer Kit, 1-3/8" Door (Int. & Ext. Gaskets) EK1038 45 Flush Keypad Overlay E1122 91 Internal power connector for hardwiring i-que E1133 22 Memory Reset Jumper E1155 15 i-dat MARK 2 USB Unit with U3 Memory Stick EA6200 841 Prox Card Enroller E6100 1128 Prox Card (100 pack) E6110 646 Prox Fobs (10 pack) E6120 165 Spacer Ring for 1-1/4" mortise cylinder E2006 15 Spacer Ring for 1-3/8" mortise cylinder E2007 15 Von Duprin 99 Rim Adapter Plate/ E7071 59 Detex Advantex 10 Series Rim Adapter Plate Precision 1100 Rim Adapter Plate E7072 59 Yale 7100 Rim Adapter Plate/ E7073 59 Corbin ED5200 Rim Adapter Plate Dorma 9300 Rim Adapter Plate E7074 59 Sargent 8800 Rim Adapter Plate/ E7075 59 Arrow 3800 Rim Adapter Plate Precision 21 Rim Adapter Plate/ E7076 59 Precision 2100 Rim Adapter Plate** Von Duprin 88 - Special Order, Consult Factory E7077 59 Monarch Adapter Plate E7078 75 NOTE: Consult Factory for Additional Exit Devices **Must use Precision #BP21 backplate. Tailpieces & Cams i-que Accessories CYLINDRICAL TAILPIECES Cylindrical Conventional FOR USE WITH KNOB CODE LEVER CODE PRICE Marks 1982 E1803 K1 E1903 E1 2 Arrow PK 100C, ILCO 705, Sargent 13-3266, Lori 1539, ASSA 65673, 65691, Abloy Schlage 23-001, Primus Corbin-Russwin 2000-034 CYLINDRICAL IC CORES Kit for 6 & 7 pin Marks, KSP, Best, Falcon, Medeco Keymark, Schlage Small Format, 6 pin Sargent E1803-L K2 E1903-L E2 2 EF1803-C K3 EF1903-C E2 4 HER1884 KR HER1984 ER 2 Kit for 6 & 7 pin Corbin HER1884-G KRG HER1984-G ERG 2 CAMS Straight cam for tubular, exit device, or mortise functions Z1 & Z4 only. USE WITH MORTISE CYLINDER PART # CODE PRICE MARKS 2101 1 2 Arrow/Sargent 2101-A A1 2 Corbin Russwin 2101-C C1 2 Schlage 2101-S S1 2 CAMS Cloverleaf cam for mortise functions Z2, Z3, Z5, Z6 only. USE WITH MORTISE CYLINDER PART # CODE PRICE MARKS 2102 2 2 CM Kit for 6 & 7 pin Yale American Lever ONLY 6 pin Schlage Large Format American Lever ONLY EAR1989-Y EMY 4 EF1903-F19 CM 4 Arrow/Sargent 2102-A A2 2 Corbin Russwin 2102-C C2 2 Schlage 2102-S S2 2 146

I-DAT MARK 2 USB UNIT WITH U3 MEMORY STICK EA6200 i-dat MARK 2 USB Unit Standard Features i-dat USB Unit: No software to install, all information resides on the U3 Memory Stick No administration rights needed on PC to use software High security infrared data transmission 4 line LCD display shows: - Lock ID / Lock serial number - Battery status of lockset on download - Number of events uploaded and downloaded Built-in menus Faster communications USB enabled System: Works on Windows XP 2000 (service pack 4) and Windows Vista with an available USB Port New software modeled after Windows Explorer - Minimal learning curve - Drag and drop capability - Fully portable (no software to install on PC) - Two step password for added security - Unlimited time zones Easy to read audit trail Power requirements 3 V (2 AA batteries included) EA6200 i-dat MARK 2 USB Unit i-dat U3 Memory Stick DESCRIPTION PART # PRICE i-dat USB Unit with Memory Stick EA6200 841 MEMORY UPGRADE IQK* SERIES PART # PRICE 512 Users/2208 Event Audit Trail U3 92 864 Users/3124 Event Audit Trail U4 92 1504 Users/2520 Event Audit Trail U5 92 3008 Users/1180 Event Audit Trail U6 92 Prox Accessories Additional upgrades consult factory. i-dat Upload / Download Module E6100 E6110 E6120 DESCRIPTION PART # PRICE Prox Card Enroller E6100 1128 Prox Cards (Per 100) E6110 646 Prox Fobs (10 pack) E6120 165 147