Parts Manual Model 0 Sno-Tek 20 (Serial No. 05000 and up) Gasoline containing up to 0% ethanol (E0) or up to 0% MTBE (methyl tertiary butyl ether) is acceptable for use in this machine. The use of any gasoline exceeding 0% ethanol (E0) or 0% MTBE will void the product warranty. Il est possible d utiliser de l essence contenant jusqu à 0% d éthanol (E0) ou 0% de MTBE (éther méthyl-tertiobutylique) sur cette machine. L utilisation d une essence contenant plus de 0% d éthanol (E0) ou de 0% de MTBE annulent la garantie. En esta máquina puede utilizarse gasolina con hasta un 0% de etanol (E0) o hasta un 0% de MTBE (éter de metil butil terciario). El uso de cualquier otro tipo de gasolina con un porcentaje superior al 0% de etanol (E0) o al 0% de MTBE invalidará la garantía del producto. 000A 0/ Printed in USA
THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.0 /.5 /.25 /8.25 5/8.88 /.88 /.250 /.750 /. 5/.8 /.75 /8.875 7/8.8 7/.8 5/.500 /2.00 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the model and serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record unit model and derial numbers here: PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit. Customer Note: If dealer does not register your product, please fill out, sign and return the product registration card to Ariens or go to www.ariens.com. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps:. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact your dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your dealer supply your model and serial numbers. Record engine model and serial numbers here: TO SPEED PARTS ORDERING:. Know the model and serial numbers of your unit. 2. Know the part number required.. Know the quantity required.. Know the part description. UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2
MODEL TABLE OF CONTENTS Model 0 Sno-Tek 20 20" Sno-Tek, Electric Start Serial No. 05000 and up DECALS Decals Sno-Tek 20....................... ENGINE AND DRIVE Engine and Belt Drive........................ FRAME AND HOUSING Handlebars and Controls...................... 8 Auger and Impeller.......................... 0 Discharge Chute........................... 2 Gear Case................................
DECA LS SN O -TEK 20 Model 0 0800070 2 080002 5 080005A 08000508 Item Part No. 2 5 08000520 080005 080002 0800070 08000508 Qty. Description Decal, Danger Decal, Danger, Rotating Parts Decal, Dash Decal, Control Decal, Housing, 20
NOTES 5
ENGINE AND BELT DRIVE Model 0 5 2 7 2 52 5 5 5 5 8 55 55 5 0 50 5 8 27 5 8 7 8 7 5 2 57 0 5 0 8 2 5 25 20 7 2 22 28 2 0 58 2 2 2 2 5 8
ENGINE AND BELT DRIVE Model 0 Item Part No. Qty. Description 005 Frame 2 0200 Washer, Flat Steel.0 x.82 x.05 000 Transmission 0800 Pulley 5 05000 Bolt, Hex.8- x.50 052000 Nut, Locking Top Flange.8-7 070000 Screw, Tapping Hex Washer Head Thread Rolling.8- x.00 8 00085 Cover, Bottom 07000 5 Screw, Tapping Hex Washer Head Thread Rolling.25-20 x.50 0 050000 Bolt, Shoulder 00705 Bracket, Cable Pulley 2 0700002 Bolt, Shoulder 05500 Nut, Locking Top Flange.25-20 070002 Pulley, Cable 5 00525 Bracket, Brake Mount 0558500 Bolt, Hex.8- x.75 7 055000 Bushing, Sleeve 8 05500028 2 Bushing, Polyliner 0550007 Bushing, Sleeve 20 05700 Idler Arm 2 05500820 Bushing, Sleeve 22 057700 Ring, Retaining External.250 x.00 2 080005 Spring 2 52000500 Arm, Brake with Pad (Includes Items 25 and 2) 25 0080500 Pad, Brake (Included in Item 2) 2 0800028 2 Rivet, Pop.87 (Included in Item 2) 27 08700 Arm, Clutch 28 0200008 Bolt, Round Head Square Short Neck.-8 x.25 2 0200 Spacer 0 025700 Idler 0500 Nut, Locking Top Flange.-8 2 080002 Spring 05500 Bushing, Sleeve 000 Washer, Flat Steel.52 x.827 x.02 5 000005 Washer, Wave 05000 Nut, Spin Locking Flange.25-20 7 007200 Cover, Belt 8 07000 2 Screw, Tapping Large Hex Washer Head Thread Rolling.25-20 x.50 055000 2 Bushing, Axle 0 0800 Shaft, Axle 028200 Gear 2 000 2 Washer, Flat Steel.75 x.000 x.02 0700222 2 Tire/Wheel,.0-070072 2 Tire,.0-070072 AR Tube,.0-055000 2 Bolt, Hex.25-20 x.75 Grade 8 5 052700 Nut, Locking Center.25-20 00050 Cable 7 0820070 Engine, LCT Stormforce 208, 20V 8 008200 Sheave, Drive 07700 Sheave, Engine 50 072000 V-Belt 5 0720008 V-Belt 52 02000 Finger, Belt 5 07200 2 Washer, Flat Steel. x.88 x.05 5 00700 2 Washer, Locking.2 x.07 55 05700 2 Bolt, Hex.-2 x.75 5 00800 Finger, Belt 57 05000 Bolt, Hex.25-20 x 2.5 Grade 8 58 0750002 2 Plug, Hole 5 008800 Washer, Locking.8 x.0 0 05000 Bolt, Hex.8-2 x.00 0580020 Pin, Roll 5mm x 2mm 2 25700 Spark Plug 075002 Fuel Cap 07500 Key, Push/Pull LCT 7
8 HANDLEBARS AND CONTROLS Model 0 27 2 0 2 2 28 0 25 8 7 2 20 7 2 8 8 2 22 2 5 5 5 8 2 20 2 7 2 5 7 5 7
HANDLEBARS AND CONTROLS Item Part No. Qty. Description 085 Handlebar, Upper Right 2 085 Handlebar, Upper Left 0758700 2 Handle Grip 50000 Control Panel with Decal 5 022000 2 Bolt, Round Head Extra Long Square Neck.25-20 x.25 05500 Nut, Locking Top Flange.25-20 7 0200207 2 Bolt, Round Head Extra Long Square Neck.-8 x 2.00 8 052800 Nut, Locking Center.-8 05 Bracket, Interlock 0 022000 2 Bolt, Round Head Extra Long Square Neck.25-20 x.50 0000 2 Clutch Paddle Block 2 02000 2 Bolt, Round Head Extra Long Square Neck.25-20 x 2.00 05500020 Bushing, Polyliner 0055 Clutch Handle, Right 5 005 Clutch Handle, Left 075000 2 Edging, Clutch Handle 7 02500 Rod, Paddle Mount, Long 8 07000 Screw, Tapping Hex Washer Head Thread Rolling.25-20 x.50 0200 Rod, Paddle Mount, Short 20 02200 2 Cam, Interlock 2 07500 2 Pin, Spring Clip 22 02000 Interlock Arm 2 020500 Rod, Pivot 2 087000 Spring 25 022700 Crank Bushing 2 0000 Cable, Auger 27 00050 Cable, Traction 28 02200 Bolt, Round Head Square Neck.-8 x 2.25 2 07500005 Spacer 0 05700 Washer, Flat Steel.8 x.875 x.08 00700 Washer, Locking.2 x.07 2 050200 Nut, Locking Nylon.-8 025 Handlebar, Lower 07028500 Bolt, Serrated Flange Hex Washer Head.8- x.75 5 0800527 2 Spring 0700 2 Washer, Flat Steel.28 x.2 x.05 7 07000 2 Pin, Hair Internal.0 x.8 x.77 Model 0
AUGER AND IMPELLER Model 0 28 27 2 0 2 5 2 0 7 5 8 7 2 7 2 2 0 7 8 2 2 25 7 2 2 22 20 8 22 20 0
AUGER AND IMPELLER Model 0 Item Part No. Qty. Description 500800 Housing, Blower 20" 2 00280 Hub 002800 Pulley 07500 7 Screw, Tapping Hex Washer Head Thread Rolling.-8 x.50 5 00700 Washer, Locking.2 x.07 05700 Bolt, Hex.-2 x.75 7 02885 2 Skid Shoe 8 020000 Bolt, Round Head Square Short Neck.8- x.75 05700 Washer, Flat Steel.8 x.875 x.08 0 05200 Nut, Locking Center.8-005 Blade, Scraper, 20" 2 020020 5 Bolt, Round Short Head Square Short Neck.-8 x.2 0500 5 Nut, Locking Top Flange.-8 05000 Bearing 5 0028700 Bearing Flange 00200 Bearing Flange 7 052700 5 Nut, Locking Center.25-20 8 52200 Rake, Right Hand with Zerk 20" 52200 Rake, Left Hand with Zerk 20" 20 5200500 2 Shear Bolt with Nut (Includes Item 7) 2 0000 2 Washer, Flat Steel.82 x.50 x.5 22 07000 2 Zerk, Fitting.25 x.25 Drive-In 2 055008 2 Bushing 2 07000 Screw, Tapping Hex Washer Head Thread Rolling.25-20 x.50 25 08555 Impeller 2 007000 Mount, Snow Clean Out 27 0800028 2 Rivet, Pop.87 28 0070200 Device, Snow Clean Out 2 0580700 2 Pin, Roll.25 x.75 0 07002 2 Nut, Threaded Insert.8-
DISCHARGE CHUTE Model 0 20 25 2 8 8 5 7 5 7 0 2 22 2 2 2 2
DISCHARGE CHUTE Model 0 Item Part No. Qty. Description 08875 Pedestal, Chute 2 008800 2 Washer, Locking.8 x.0 0558500 2 Bolt, Hex.8- x.75 02800 2 Friction Washer 5 0007 Washer, Flat Steel.0 x.25 x.0 5200000 Chute, Discharge with Cap and Decal 7 022200 Chute Gear 8 02200 Bolt, Round Head Square Neck.8- x 2.50 008000 Plate, Friction 0 082000 Spring 052000 Nut, Locking Top Flange.8-2 0200007 Bolt, Round Head Square Short Neck.-8 x.00 0725 Bracket, Pinion Gear 07000 Screw, Tapping Hex Washer Head Thread Rolling.25-20 x.50 5 0550002 Bushing, Polyliner 00000 Washer, Thrust.25 x.0 x.0 7 5200000 Pinion Gear Assembly (Includes Items, 5, and 8) 8 02200 Pushnut 07500 Pin, Spring Clip 20 022000 Gear Cover 2 07200 Washer, Flat Steel. x.88 x.05 22 0750005 Wing Knob 2 000 Washer, Flat Nylon.75 x.75 x.00 2 0500 Rod, Chute Crank 25 075002 2 Knob, Chute Crank
GEAR CASE Model 0 5 2 8 7 2 2 7 8 0 20 0 8 5 22 2
GEAR CASE Model 0 Item Part No. Qty. Description 028025 Cover, Top 2 028200 Gasket 0000 Gear Case 07200 Screw, Tapping Hex Washer Head Thread Rolling.25-20 x.75 5 00020 Washer, Bonded Seal 07000 Screw, Tapping Hex Washer Head Rolok.8- x.50 7 0550020 Bushing, Flange 8 050050 2 Seal, Oil 05500 Bushing, Flange 0 0002 2 Washer, Flat Steel.70 x.225 x.02 520000 Worm Shaft and Worm Gear Set 2 0277000 Thrust Collar 05800207 Pin, Straight.88 x.00 50 055008 Bushing, Flange 5 002800 Cover, Front 055007 Bushing, Flange 7 05000 Seal, Oil 8 0200 Bushing Retainer 0570022 Ring, Retaining Internal.500 x.050 20 0000 Key, Woodruff. x. Hardened # 2 0020500 Shaft, Rake 22 50000 Gear Case Assembly (Includes Items 2) 2 0008800 Gear Lube, 8 oz. Bottle 5
Ariens 55 West Ryan Street Brillion, WI 50 20-75-88 Fax 20-75-207 www.ariens.com