LTX4 22 F to 400 F (30 C to 760 C) LTX2 22 F to 200 F (30 C to 650 C) LTX0 22 F to 000 F (30 C to 538 C) Simple and easy to use Simply point at an object and read its temperature. Laser sight for accurate targeting. Measures object temperatures without contact. Safely measure temperature of hot parts and objects from a distance. Quick response: 0.5 sec. How it works: The LTX series infrared thermometers measure the temperature of any object, by sensing the amount of infrared (invisible light) energy emitted by it, hence they do not require any contact, and can be used from a safe or convenient distance from the measured object. ThermoSounder LTX2 and LTX4 only: A reference temperature is set by pointing at the object to measure and pressing the trigger. Higher than set reference temperature generates a fast beeping. Lower than set reference temperature generates a slow beeping. Precise temperature readings are also available in the LCD display at all times. LTX series Infrared thermometers with laser sight Main features Exclusive ThermoSounder temperature audio feedback (LTX2 and LTX4 only). State of the art patented ergonomic design and styling for enhanced handling and use. Wide temperature range: 20 to 200 F (30 to 650 C). Optimum 0: distance to measurement spot ratio. Class II laser pointer. Large LCD display with symbols and backlight. Quick selection between C/ F. Continuous reading and data hold modes. Soft holster for instrument protection. Auto power off.
Model LTX0 LTX2 LTX4 Temperature C 30 C to 538 C 30 C to 650 C 30 C to 760 C Temperature F 22 F to 000 F 22 F to 200 F 22 F to 400 F ThermoSounder No Yes Yes Display 3½ digit LCD, Max. of 999 display with measuring units, laser and backlight indicators. Resolution 0. to ( C or F) Operating Temperature 32 F to 22 F (0 C to 50 C) Response time <500 ms (approx.) Target Size/ Field of View 0: optics ratio with a min. target Emissivity Fixed at 0.95 Sensor Wavelength 7 to 4 µm Laser Pointer Laser diode, < mw output wavelength 630670 nm, Class II Power Source 9volt battery type NEDA 604, IEC6F22 IEC 6LR6 Battery life Approximately 20 hours (w/alkaline battery) Power Saving Automatic power off after 7 seconds of inactivity Dimensions 3.3 x.88 x 7.0 (80 x 48 x 78 mm) Weight 7.6 oz. (25 g) including battery Applications: Automotive/Transportation & Fleets Industrial/Manufacturing & Construction Heating/Ventilation & Air Conditioning Agricultural/Farming & Gardening Home/Recreation & Hobby Cooking & Food Safety LTX includes: LTX0/2/4. Soft Pouch. 9V alkaline battery. User s Manual. year parts and labor warranty. Other GTC products Product designed and manufactured in Canada TA0 Laser tachomer and counter CM Series From ma up to 000 A AC/DC current clamp meters FF30 FaultFinder Open and short circuit finder and tracer CT8002 Professional cordless computersafe circuit tester ST05 Oxygen sensor tester and simulator CT Series Automotive and industrial digital multimeters TA Series Smartach Tachometers and Engine Analyzers General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca GTC and V Ready are registered trademarks of General Technologies Corp. 200 General Technologies Corp. 5/03/3 Printed in Canada
Wide band A/F ratio Titanium and 5 V Zirconium Simple and flexible to use Sensor can be tested on or off the vehicle. Does not require special setups or in depth knowledge to use. Provides instant readings and testing capabilities of the output of the sensor. Diagnoses lazy (slow response) sensors, which may not set DTCs, but cause driveability problems. Excellent preventive maintenance tool, to diagnose sensors that need to be replaced before they set DTCs or completely fail. Ruggedized electronics make it almost impossible to damage the instrument, even if wrongly connected. ST05 features The sensor signal output is shown in real time on the bar graph, while a 2 digit alphanumeric display shows the sensor output cross count per second. By pressing the Test button and performing a snap throttle acceleration of the engine, it tests the response time of the sensor and shows a pass or fail result within seconds. Two buttons allows for simulation of rich or lean conditions to monitor response of the engine control module. Advanced connection detection: The ST05 automatically detects common wire misconnections like ground, heater wires, disconnected test leads, reversed polarity etc. and displays these on the alphanumeric display. Only requires the connection of two probe clips to the oxygen sensor wires, and the selection of the oxygen sensor type. ST05 Oxygen Sensor Tester and Simulator Technical specifications Display: 2 digit alphanumeric LED display. 20 segment LED bargraph with 0 to Volt or 0 to 5 Volt ranges. Cross count: 0. to 0 CPS. Response test: <00 ms Pass +/ 5 ms, >00 ms Fail +/ 5 ms. Test leads: 2 wire piercing alligator clips, and 6.5 ft cables. Power source: One standard 9 Volt alkaline battery type NEDA 604 IEC 6F 22. Battery life: approximately 25 hrs., with low battery indicator and auto power off. Physical dimensions (including holster): 6" (H) x 4" (W)x.5" (D) (58 x 00 X 37 mm). Weight: approximately 4 Oz. or 406 gr. (including battery).
Electrical Specifications Input Range: 0 to 5 Volt. Input Protection: +/ 48 VDC maximum, current limited. Auto Detection: Detects open connection, reversed polarity, ground, heater and open connection. Applications: Test zirconium sensors. Test titanium Volt sensors. Test titanium 5 Volt sensors. Test wideband (air/fuel ratio) sensors. Test to 4 wires sensors (heated and unheated). Simulate rich and lean sensor output. Test sensor response time. ST05 includes: ST05. Two piercing clips with 6 ft. cables. Protective rubber holster. Polypropylene carrying case. x 9 Volt alkaline battery. User s Manual. year parts and labor warranty. Other GTC products Product designed and manufactured in Canada TA0 Laser tachomer and counter CT8002 Professional Cordless ComputerSafe Circuit Tester FF30 FaultFinder Open and short circuit finder and tracer LTX Series From 20 up to 400 F Infrared thermometers with laser sight CM Series From ma up to 000 A AC/DC current clamp meters CT Series Automotive and industrial digital multimeters TA Series Smartach Tachometers and Engine Analyzers General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca GTC and V Ready are registered trademarks of General Technologies Corp. 200 General Technologies Corp. 5/03/3 Printed in Canada
Measures from 2 to 20 or more away from the target to 99,999 RPM or counts Maximum and Minimum readings Simple and easy to use Simply apply a small piece of the reflective tape supplied to the rotating or moving object under measurement. Point the laser at the reflective tape. Read RPM or event count on the LCD Display. How it works The TA0 laser tachometer works by aiming a red laser beam against a rotating object marked with a reflective spot. The microcontroller remotely measures the rate at which the laser beam is reflected back, calculates the RPM and displays it on the LCD screen. It can be used to measure the number of rotations per minute (rpm) of any spinning shaft, pulley, wheel, drive belt, fan, or other rotating parts, safely and accurately. Laser tachometers have the advantage of being able to measure rpm without being directly in contact with the rotating shaft or any moving parts. TA Laser Tachometer and Counter Main features State of the art patented ergonomic design and styling for enhanced handling and use. Wide measuring range : to 99,999 RPM Wide distance range: 2 to 20 (50 to 500 mm). Quick selection between RPM and count functions. Maximum and minimum memory recall functions. Continuous reading and data hold modes. Quick response: <0.3 seconds (depending on the object RPMs). Laser sight for high contrast and accurate targeting. Large LCD display with symbols and backlight. Measures RPM without contact. Safely measures RPM from a distance, away from hot and/or moving parts. Soft holster for instrument protection. Auto power off.
Technical Specifications Display: Large 5 digit LCD display Display backlight On target and hold indicators Laser on indicator Maximum and minimum indicator Measuring mode indicator Low battery indicator Applications: Automobiles Industrial Aviation Agricultural Marine Internal combustion engines Electric motors Compressors Centrifuges Pumps Fans Measurement range: to 99,999 RPM Resolution: RPM or Count Operating Temperature: 32 F to 22 F (0 C to 50 C) Response time: <300 ms (above 200 RPM) Target distance: 2 to 20 (50 to 500 mm) Accuracy: ± 0.05% + LSD Sensor Type: Phototransistor Laser Pointer: Laser Diode, < 2mW output wavelength 630670 nm, Class II Power Source: 9volt battery type NEDA 604, IEC6F22 IEC 6LR6 Battery life: Approximately 6 hours (w/alkaline battery) Power Saving: Automatic power off after 0 seconds of inactivity Dimensions: 7.00"(H) x.88"(w) x 3.3"(D), 78 mm x 48 mm x 80 mm Weight: 7.6 oz or 25 g (w/battery) TA0 includes: TA0 Soft pouch 3 strips of 0.5 x 8 ( 2 x 200 mm) self adhesive reflective tape x 9 Volt alkaline battery User s manual year parts and labor warranty Other GTC products Product designed and manufactured in Canada ST05 Oxygen Sensor Tester and Simulator CT8002 Professional Cordless ComputerSafe Circuit Tester FF30 FaultFinder Open and short circuit finder and tracer CM Series From ma up to 000 A AC/DC current clamp meters LTX Series From 20 up to 400 F Infrared thermometers with laser sight CT Series Automotive and industrial digital multimeters TA Series Smartach Tachometers and Engine Analyzers General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca GTC and V Ready are registered trademarks of General Technologies Corp. 200 General Technologies Corp. 5/03/3 Printed in Canada
Diesel CNG Gasoline Simple and easy to use Read RPM from the driver seat by connecting it to the cigarette lighter socket or from the engine bay by connecting directly to the battery. Select the number of cylinders and cycles for the engine. Press the calibration button to start reading RPM within a few seconds. How it works The TA303 Smartach is a tachometer designed for use on any engine equipped with an alternator, and only requires a simple connection to the electrical system (e.g. battery, alternator, cigarette lighter connector) to measure engine RPM. Taking advantage of the ripples generated by the alternator, the TA303 automatically calculates the relationship between the speed of the engine and the alternator ripples, and uses them to measure RPM on any piston engine regardless of its ignition system (Diesel or gasoline). The TA303 does not require direct contact or line of sight to rotating parts, or reflective tape like with optical tachometers, or mounting of special sensors or pickups, or other specialized equipment. The TA303 comes with the cables to connect to the battery or other accessible power outlet, a cigarette lighter socket connector and 0 extension cable. 303 Diesel & Gasoline Engine Tachometer TA Multiuse tachometer: Advanced technology for measuring RPM in Diesel and gasoline engines without complicated or lengthy setups, it works with any engine equipped with an alternator For use with: Diesel engines Gasoline engines CNG engines, and others Safe to use, it does not require: Contact with any part of the engine Maintaining line of sight of rotating parts Attaching reflective tape Placing optical or magnetic sensors on the engine
Technical Specifications Display: Large 4½ digit LCD display Measurement unit indicator Number of cylinders indicator Number of cycles indicator RPM measurement Range: 200 to 9,999 RPM Resolution: RPM Accuracy: ±0.5% + LSD Response time: <300 ms (above 200 RPM) Input connector: BNC jack Cables and connectors: 3.0 (.5 m) cigarette lighter socket connector 6.5 (2.0 m) with battery alligator clips 0 (3.0 m) extension Input voltage range: 8.2 to 42 VDC Power consumption: 0.5 Amperes maximum Dimensions: 6."(H) x 4.0"(W) x.5"(d) or 55 mm x 02 mm x 38 mm (without cables) Weight: 2.4 oz. or 355 g (without cables) TA303 set includes: TA303 Protective rubber holster Hard carrying/storage case Cigarette lighter socket connector cable Battery connectors cable Extension cable User manual year parts and labor warranty Other GTC products Applications: Exhaust emission testing Exhaust noise testing Heavy equipment Automotive Agricultural Industrial Marine Product designed and manufactured in Canada TA0 Laser Tachometer and Counter CT8002 Professional Cordless ComputerSafe Circuit Tester FF30 FaultFinder Open and Short Circuit Finder and Tracer CM Series From ma to 000 A AC/DC Current Clamp Meters LTX Series From 20 up to 400 F Infrared Thermometers with Laser Sight CT Series Automotive and Industrial Digital Multimeters TA500 MultiSystem Ignition Analyzer and Tachometer General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca S m a r T a c h i s a t r a d e m a r k o f G e n e r a l T e c h n o l o g i e s C o r p. 2 0 2 G e n e r a l T e c h n o l o g i e s C o r p. 5/03/3 Printed in Canada
CM600 0. to 600 Amperes AC/DC CM000 0. to 000 Amperes AC/DC CM00 ma to 00 Amperes AC/DC CM series AC/DC Current Clamp Meters Simple and easy to use Using the rotary switch on the handle, select the type of current: AC or DC. Press the lever to open the clamp meter jaw and insert the wire or cable into the opening. Read the current measurement on the LCD display. How it works The CM series of clamp meters measure the electrical current in wires, cables or electrical wiring systems by detecting the magnetic field generated around them by the flow of electricity. These instruments are capable of measuring currents without direct contact to the circuit for quick, safe and accurate results. Besides detecting and measuring current, current peaks and parasitic draws, they also integrate voltage, resistance and continuity measurement functions, to cover a wide range of common electrical measurements. Main features State of the art ergonomic design and styling for enhanced handling and use. Three models with wide measuring ranges: ma to 00 A (CM00), 0. A to 600 A (CM600) and 0. A to 000 A (CM000). AC/DC current and voltage measurement. Ultralow current measurement capability ( ma for CM00) for current leak measurement and troubleshooting. Safely measures current without contact with the wire or circuit. Double insulation, IEC 00, CAT II 600V (CM00 and CM600), CAT II 000 V (CM000). Continuous reading and data hold modes. Auto zero button for easy and quick zeroing of the measurement. Quick response: <0.5 seconds. Large LCD display with symbols. Soft pouch for instrument protection Auto power off.
Model CM00 CM600 CM000 DC Current 0.00 to 00 A. 0. to 600 A. 0. to 000 A. AC Current 0.00 to 00 A. 0. to 600 A. 0. to 000 A. DC Voltage 0. to 600 V. 0. to 600 V. 0. to 000 V. AC Voltage 0. to 600 V. 0. to 600 V. 0. to 000 V. Resistance 0 to 00 KOhm 0. to 000 Ohm 0 to 00 KOhm Continuity test Yes Yes Yes Display 4 digit LCD, 9999 counts with measurement units. Autopolarity Automatic () negative polarity indicator. Zero adjustment One touch button. Sample rate 0.5 sec. or 2 samples/sec. Peak hold function 0 ms for DCV and DCA. Over range indicator "OL" indicator for all functions. Power 2xUM4 or AAA batteries. Auto power off Automatic power off after 30 min of inactivity. Battery life Approximately 50 hrs. (w/alkaline batteries) CM00 Clamp size opening /2 (2.5 mm) Max. Dimensions 7.95 (H) x 2.62 (W) x.33 (D) (202 mm x 67 mm x 33.8 mm). Weight Approx. 6.34 Oz (80 gr.). CM600 and CM000 Clamp size opening (25 mm) Max. Dimentions 7.44 (H) x 2.75 (W) x.33 (D) (89mm x 70 mm x 34 mm). Weight Approx. 7.76 Oz (220 gr.). Instrument includes: Clamp meter User s manual Soft carrying pouch Test leads 2 x AAA Alkaline batteries year parts and labor warranty Other GTC products LTX Series From 20 up to 400 F Infrared thermometers with laser sight CT8002 Professional cordless computersafe circuit tester FF30 FaultFinder Open and short circuit finder and tracer TA0 Laser tachomer and counter ST05 Oxygen sensor tester and simulator CT Series Automotive and industrial digital multimeters TA Series Smartach Tachometers and Engine Analyzers General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca GTC and V Ready are registered trademarks of General Technologies Corp. 200 General Technologies Corp. 5/03/3 Printed in Canada
CM600 0. to 600 Amperes AC/DC CM000 0. to 000 Amperes AC/DC CM00 ma to 00 Amperes AC/DC CM series AC/DC Current Clamp Meters Simple and easy to use Using the rotary switch on the handle, select the type of current: AC or DC. Press the lever to open the clamp meter jaw and insert the wire or cable into the opening. Read the current measurement on the LCD display. How it works The CM series of clamp meters measure the electrical current in wires, cables or electrical wiring systems by detecting the magnetic field generated around them by the flow of electricity. These instruments are capable of measuring currents without direct contact to the circuit for quick, safe and accurate results. Besides detecting and measuring current, current peaks and parasitic draws, they also integrate voltage, resistance and continuity measurement functions, to cover a wide range of common electrical measurements. Main features State of the art ergonomic design and styling for enhanced handling and use. Three models with wide measuring ranges: ma to 00 A (CM00), 0. A to 600 A (CM600) and 0. A to 000 A (CM000). AC/DC current and voltage measurement. Ultralow current measurement capability ( ma for CM00) for current leak measurement and troubleshooting. Safely measures current without contact with the wire or circuit. Double insulation, IEC 00, CAT II 600V (CM00 and CM600), CAT II 000 V (CM000). Continuous reading and data hold modes. Auto zero button for easy and quick zeroing of the measurement. Quick response: <0.5 seconds. Large LCD display with symbols. Soft pouch for instrument protection Auto power off.
Model CM00 CM600 CM000 DC Current 0.00 to 00 A. 0. to 600 A. 0. to 000 A. AC Current 0.00 to 00 A. 0. to 600 A. 0. to 000 A. DC Voltage 0. to 600 V. 0. to 600 V. 0. to 000 V. AC Voltage 0. to 600 V. 0. to 600 V. 0. to 000 V. Resistance 0 to 00 KOhm 0. to 000 Ohm 0 to 00 KOhm Continuity test Yes Yes Yes Display 4 digit LCD, 9999 counts with measurement units. Autopolarity Automatic () negative polarity indicator. Zero adjustment One touch button. Sample rate 0.5 sec. or 2 samples/sec. Peak hold function 0 ms for DCV and DCA. Over range indicator "OL" indicator for all functions. Power 2xUM4 or AAA batteries. Auto power off Automatic power off after 30 min of inactivity. Battery life Approximately 50 hrs. (w/alkaline batteries) CM00 Clamp size opening /2 (2.5 mm) Max. Dimensions 7.95 (H) x 2.62 (W) x.33 (D) (202 mm x 67 mm x 33.8 mm). Weight Approx. 6.34 Oz (80 gr.). CM600 and CM000 Clamp size opening (25 mm) Max. Dimentions 7.44 (H) x 2.75 (W) x.33 (D) (89mm x 70 mm x 34 mm). Weight Approx. 7.76 Oz (220 gr.). Instrument includes: Clamp meter User s manual Soft carrying pouch Test leads 2 x AAA Alkaline batteries year parts and labor warranty Other GTC products LTX Series From 20 up to 400 F Infrared thermometers with laser sight CT8002 Professional cordless computersafe circuit tester FF30 FaultFinder Open and short circuit finder and tracer TA0 Laser tachomer and counter ST05 Oxygen sensor tester and simulator CT Series Automotive and industrial digital multimeters TA Series Smartach Tachometers and Engine Analyzers General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca GTC and V Ready are registered trademarks of General Technologies Corp. 200 General Technologies Corp. 5/03/3 Printed in Canada
CT8002 Professional Cordless Circuit Tester Main Features No ground wire means no wire tangles nor time lost searching for grounding points High Impedance Electronic circuitry Safety Vgroove needle accessory for piercing and storing Negligible Current Draw ( 20 microamps) is 0,000 times less than regular lamp type testers This gives complete safety when working around sensitive electronic control modules and sensors Operating Range between 3 and 28 Volt DC in battery powered systems Buzzer & LED Indicator gives audible and visual signal when positive voltage is detected, making it ideal for reaching congested places Buzzer vibration indicates even when used in noisy outofsight locations Professional rugged Stainless Steel metal construction is damage resistant Rugged Solid State electronic voltage detector needs no wire or clip connector to ground. Safe around automotive microcomputers, electronics control modules, sensors, etc. Specifically designed for use on autos, trucks, trailers, RV s & boats. The CT8002 Includes: Safety Vgroove needle accessory 2 x.5v alkaline batteries Short Instructions CT600 Fuse Socket Connectors Main Features Ergonomically molded connector. Easy access connector tabs fit: 4 quick connects Alligator clips Jumper Leads Multimeter test leads Plated contacts for maximum conductivity and durability Fits all Maxi, ATO and Mini automotive fuse sockets Access electrical circuit at fuse socket to: Check Voltage Check Short/Open Circuits Check Current Draws Tap power to energize/check electrical components and accessories: Cooling fans Electric fuel pump Power window motors Power doors Lamps Relays Wiring harnesses The CT600 Includes: Maxi size fuse socket connector ATO/ATC size fuse socket connector Mini size fuse socket connector General Technologies Corp. Automotive Electrical Testing and Measurements Tools Selection Guide General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Tel: 6049526699 Fax: 6049526690 Toll Free: 8004405582 www.gtc.ca
CM000 CM600 CM00 Main Features Main Features Main Features AC/DC current measurement up to 000 A. AC/DC current measurement up to 600 A. AC/DC Voltage measurement up to 000 Volt. AC/DC Voltage measurement up to 600 Volt. Resistance measurement up to 00 KOhm Resistance measurement up to KOhm Continuity check with audible indicator. Continuity check with audible indicator. Full autorange features Full autorange features Clamp opens up to inch (25.4 mm) Clamp opens up to inch (25.4 mm) One rotary switch operation One rotary switch operation Large 4 digit LCD display. Large 4 digit LCD display. Relative measurement Relative measurement One touch auto zero. One touch auto zero. Peak Hold Function Data Peak Hold Function Data Hold Function Hold Function 2 readings per second sampling 2 readings per second sampling AC/DC current measurement from ma up to 00 A. Small jaw:.2 (W) x 0.53 (D) (300x3.4mm) Clamp opens up to /2 inch (2.5 mm). AC/DC Voltage measurement up to 600 Volt. Resistance measurement up to 0 KOhm Continuity check with audible indicator. One rotary switch operation Large 4 digit LCD display. Relative measurement One touch auto zero. Peak Hold Function Data Hold Function 2 readings per second sampling CM000 Applications: CM600 Applications: 000 Amps AC/DC Current Clamp Meter 600 Amps AC/DC Current Clamp Meter ma to 00 A AC/DC Current Clamp Meter CM00 Applications: Measure currents in circuits like battery chargers, alternators, starter motors, electrical loads, etc. Measure currents in circuits like battery chargers, alternators, starter motors, electrical loads, etc. Measure small drain and parasistic current draws in circuits, sensors, electronic modules, electrical loads, etc. Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc. Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc. Check grounds, Voltage drops and continuity across Connectors, Spark Plug Wires, Cables, Relays Contacts, Lamps, Switches, etc. Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pickups, Motors, Switches, Fuses, etc. Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Magnetic Pickups, Motors, Switches, Fuses, etc. An essential tool for all around troubleshooting of electrical and electronic circuit and systems. An essential tool for all around troubleshooting of electrical and electronic circuit and systems. Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pickups, Motors, Switches, Fuses, etc. An essential tool for troubleshooting electrical and electronic circuit and systems. The CM000 includes : The CM600 includes : Two test leads Soft carrying case 2x.5V AAA alkaline batteries User s manual Two test leads The CM00 includes : Two test leads Soft carrying case Soft carrying case 2x.5V AAA alkaline batteries 2x.5V AAA alkaline batteries User s manual User s manual
Short Circuits Open Circuits Wire Tracing Simple to use: Connect the FF30 transmitter in series with the faulty circuit or wire (e.g.: in place of a blown fuse, across a connector, in series with an open wire, to a light bulb socket). Follow the faulty circuit or wire using the FF30 tracer s flexible probe, even behind panels, upholstery, inside conduits, harnesses, etc. When the signal indicators (light and sound) of the FF30 receiver stops, it indicates that you have found the trouble spot. How it works The FF30 consist of a set: one transmitter and one receiver (tracer). The FF30T (transmitter) when connected, injects a radio signal into the faulty circuit or wire, which allows to trace it with the FF30R (receiver) from several inches away, even when the wires are inside conduits, harnesses, or behind panels and upholstery. The 8 flexible probe of the FF30 is designed to be use in constrained spaces, and a set of fuse blade connectors is provided for convenient connection of the FF30 transmitter in the socket of blown fuses or open circuits. FF30 Short / Open Circuit Finder and Circuit Tracer Main Features: 42 V Ready: for use in the new generation of vehicles with mixed or single 42 volt systems. Operates on DC voltages from 6 to 42 volts. Internally protected against power surges and overloads. 8 flexible probe allows reaching wires in congested places. Includes three sizes of blade type fuse socket connectors. Transmitter and receiver LEDs show open or short circuit conditions. Variable audio/visual signal provides fast and intuitive feedback on the circuit/wire proximity. Adjustable sensitivity for all tracing situations. No wire piercing required, noncontact technology. Tracing of wires is made possible even inside bundles, conduits, behind panels, under carpets, upholstery, etc. Transmitter has auto polarity and leads with 5 amps alligator clips.
Technical Specifications: FF30T (transmitter) Input voltage: Indicators: Power source: Battery life: Connector: FF30R (receiver) Sensitivity: Receiver probe: Indicators: Power source: Battery Life: 6 to 42 VDC. Green LED for power on and open circuits, red LED for short circuits. x 9volt alkaline battery, type Duracell MN604 (included). approximately 25 hrs. (w/alkaline battery). Two 5 A alligator clips with auto polarity and 8 long cable. Three user selectable sensitivity levels (low, medium and high). Flexible 8 (20 cm) gooseneck insulated steel probe. Green LED indicator for power on and open circuits, red LED indicator for short circuits. Variable flashing and modulated audible signal. x 9volt alkaline battery, type Duracell MN604 (included). Approximately 25 hrs. (w/alkaline battery). Auto power off feature to extend battery life. Applications: Automobiles Trucks Trailers Boats Any 6 to 42 Volt DC powered circuits Performs: Short circuit tracing Open circuit tracing Wire identification Wire/Circuit tracing Ground connection checks FF30 set includes: FF30T (transmitter). FF30R (receiver). CT8002 Circuit Tester. Three sizes (Mini, ATO and Maxi) blade type fuse block connectors. Foam padded polypropylene carrying case. 2 x 9 Volt alkaline batteries. User s handbook. year parts and labor warranty. Other GTC products Product designed and manufactured in Canada TA0 Laser tachomer and counter CT8002 Professional cordless computersafe circuit tester ST05 Oxygen sensor tester and simulator LTX Series From 20 up to 400 F Infrared thermometers with laser sight CM Series From ma up to 000 A AC/DC current clamp meters CT Series Automotive and industrial digital multimeters TA Series Smartach Tachometers and Engine Analyzers General Technologies Corp. #27350 72nd Street Delta, BC V4G H9 Canada Toll Free: 8004405582 / Tel: 6049526699 / Fax: 6049526690 www.gtc.ca / info@gtc.ca GTC and V Ready are registered trademarks of General Technologies Corp. 200 General Technologies Corp. 5/03/3 Printed in Canada