GRINDING JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders www.jonesshipman.com
Touchscreen controlled Easy or full CNC cylindrical grinding machines ULTRAM Wheelhead options, robust construction & innovative design Wheelheads Robust plain straight approach, external only, and Angle Head options. Wheels up to 500 x 80mm and optional programmable constant peripheral wheel speed. Swivelling Universal and Full B axis wheelhead options, have as standard air cushion lift and pneumatic clamping. Both are equipped with left & right hand wheels and a belt driven internal grinding system ready to accept an optional internal spindle. The Full B axis wheelhead incorporates a high precision worm & wheel assembly for infinitely variable rotation to 0.001. All wheels are provided with retractable wheel guards. Workheads and tailstocks A live & dead centre swivel base workhead is provided for all models except the Angle Head which has a heavy duty, dead centre, fixed base unit. All workheads have ported coolant for thermal stability and are air purged. Both incorporate high precision taper roller bearings for superior stiffness and a variable speed drive via a synchronous belt which allows direct programmed speed (r.p.m.) or constant surface speed (m/sec.) of the workpiece. A robust, lever operated high accuracy, taper correction tailstock is provided as standard on most models. Main machine castings Generously proportioned, high quality cast iron, bed, underslide, backslide and table, each casting designed to provide excellent rigidity. Slideways Bed/underslide is a Vee & Flat configuration, the wheelhead backslide operates on twin Vee ways. All slideways are hand scraped, with one surface Turcite coated, all have automatic lubrication Axes All axes are controlled & positioned by Fanuc Digital AC servo motors with 50 nanometre Heidenhain Absolute linear scale feedback.
AT Easy control Easy - Grind cycle screens Easy - Dress cycle screens Affordable & sophisticated cylindrical grinding with simple set-ups Developed to offer to the operator the advantages of CNC control without the complexity of traditional CNC systems. Jones & Shipman easy-to-use icon based software with Fanuc touchscreen control can interpolate two axes simultaneously to enable precision grinding of complex shapes, angles and diameters. Easy manual, semi or fully automatic operation. Self Teach software enables inexperienced & experienced operators alike to be immediately more productive. The operator is offered three modes of operation; Manual, Dress or Grind by simple single membrane button selection. All controls are immediately to hand for setting and manual operation when required. Quick set automatic dressing & grinding cycles enable unmanned operation. Dress on demand with full compensation. Optional equipment Gauging including :- Shoulder, Diameter & Gap Elimination Standard & variable speed Internal grinding spindles CAD/CAM package for producing complex wheel profile programs Head or Table mounted shoulder probe options Auto & semi auto wheel balancing 3, 4 & 6 jaw Chucks, Magnetic Chucks, Collets and Steady rests Coolant and Mist extraction units
CNC control CNC - Dress & Grind screens Faster set-up and operating efficiency Ultramat software is designed to minimise set-up times, fundamental in reducing machined component costs whilst maximising manufacturing output Easy to follow set-up pages with graphical images allow the operator to digitise diamond and wheel positions by means of a simple user-friendly touchscreen interface This graphical programming removes the requirement for operators to input complex code, subsequently reducing set-up and operator training costs ISO programming is fully supported and codes can also be easily viewed and used at any time as each method of modification updates the other seamlessly within the program Hardware The Ultramat CNC incorporates a Fanuc 0i-TD touch-screen CNC control with a Windows embedded system. For improved reliability a large integrated Flash memory module is provided, in place of a hard drive, for part program storage. A remote pendant is provided, incorporating a 2 line LCD display & function buttons, which together provide access to an extensive range of operating features. The latest technologies are used, Ethernet connection to enable all programs to be managed via a PC or network giving the extra information needed for complete traceability, plus, USB, PC card and RS232 to assure full flexibility and enable quick cost-effective integration to be easily implemented
General Specifications 650 Models 1000 Models Maximum length between centres 650 mm 1000 mm Centre height 160 mm 160 mm Grinding diameter 300 mm 300 mm Maximum weight between centres 100 kg 100 kg Maximum weight at workhead 100 kg 100 kg Table traverse distance (Z axis maximum) 750 mm 1150 mm Table swivel clockwise/anticlockwise, inclusive 16 / 18 11 / 16 Shipping Dimensions (approximate) Easy Model 14.55 m 3 16.70 m 3 Shipping Dimensions (approximate) CNC Model 15.60 m 3 17.88 m 3 Machine Dimensions - net weight (approximate) Easy Model 4800 kg 5250 kg Machine Dimensions - net weight (approximate) CNC Model 4900 kg 5350 kg Machine Dimensions - gross weight (approximate) Easy Model 5300 kg 5750 kg Machine Dimensions - gross weight (approximate) CNC Model 5400 kg 5850 kg Z and X axis traverse control Fanuc Digital AC Servo motor Z and X axis traverse feedback 50 nanometre Heidenhain Absolute linear scale Z and X axis electronic handwheel increments (Easy Model) 0,001, 0,01, 0,1 mm Z and X axis electronic handwheel increments (CNC Model) 0,0001, 0,001, 0,01, 0,1 mm Z and X axis minimum programmable increment (Easy Model) 0,0001 mm Z and X axis minimum programmable increment (CNC Model) 0,0001 mm Wheelslide (X Axis) (all models) Total infeed Maximum traverse speed Maximum programmable diametrical infeed rate per min. Tableslide (Z Axis) (all models) Maximum traverse speed 260 mm 6 m/min 100 mm 12 m/min Wheelheads Plain (Straight approach) Grinding wheel Diameter (Option) 450 mm (500mm) Width (Option) 50 mm (80 mm) Bore 203 mm Wheel speed 45 m/s Wheel motor power 7,5 kw Swivelling (Universal) Including B axis Grinding wheel - Left hand, Diameter / Width / Bore (Option) 350 (400) x 50 x 127 mm Grinding wheel - Right hand, (Option), Maximum diameter / Width / Bore 300 x 25 x 127mm Wheelhead swivel range clockwise/anticlockwise 198 / 30 B axis infinetly variable to 0.001 Wheel speed (both wheels) 33 m/s Wheel motor power (both wheels) 4 kw Internal grinding spindles (Option) A range of Direct or Belt driven internal spindles are offered to suit customers requirements Spindle speed ranges from 10.500 to 160.000 rpm Internal spindle bracket bore 80 mm Motor power (for standard belt driven option) 2.2 kw Angle Head (Configured with left hand mounted external wheel) Grinding wheel size, standard, recessed 450 x 50 x 203 mm Grinding wheel size, (up to 100 mm wide) recessed 2 sides (Option) 450 x 100 x 203 mm Grinding wheel size, (recessed one side at Ø290 x 30 mm deep (Option) 508 x 80 x 203 mm Motor power 7,5 kw Workheads Dead centre, fixed base (Standard) and Live & Dead centre, swivel base (Option) Speed range, continuously variable (both models) 0-660 rpm Spindle taper (both models) 5 MT Output torque (continuous rating) (both models) 27 Nm Motor power (both models) 1,6 kw Swivel angle (live & dead centre model) -15 + 90 Tailstocks - Standard or Optional Taper Control Poppet diameter (both models) Poppet taper (both models) Centre travel (both models) Poppet pressure adjustable (both models) Maximum adjstment on diameter (Taper control tailstock only) Smallest diametrical graduation (Taper control tailstock only) 50 mm 3 MT 30 mm 60-410 N 0.2 mm 0.0005 mm Control Systems Ultramat Easy Ultramat CNC Fanuc motion control Fanuc 0i-TD Number of axes controlled Up to 4 Up to 4 All specifications and designs are subject to alterations without notice. Ultramat Easy 650 Model 1000 Model A - 2785 mm A - 3540 mm B - 883 mm B - 883 mm C - 2445 mm C - 2445 mm D - 2185 mm D - 2185 mm E - 1840 mm E - 1840 mm G - 289 mm G - 289 mm Machine Height - 2015 mm Ultramat CNC 650 Model 1000 Model A - 3080 mm A - 3835 mm B - 675 mm B - 807 mm C - 2637 mm C - 2480 mm D - 2185 mm D - 2400 mm E - 1840 mm E - 1840 mm F - 127 mm H - 1541 mm Machine Height - 2015 mm Jones & Shipman also offer Large Capacity Surface Grinders, Creepfeed Grinders and Cylindrical Grinders for Toolroom and Production applications.
World-wide sales and service 05.2014 Through our Group Companies and an established network of distribution Jones & Shipman guarantee competent advice and support in evaluating, purchasing and using highquality cylindrical, surface and creepfeed grinding systems. Sales and service: Jones & Shipman Hardinge Limited Murrayfield Road, Leicester LE3 1UW, England Tel: +44 (0) 116 201 3000 Fax: +44 (0) 116 201 3002 www.jonesshipman.com info@jonesshipman.com Jones & Shipman S.A.R.L. Zone Activillage, 8 allée des Ginkgos, B.P. 112, 69672 BRON Cedex, France Tel: +33 (0) 4 72 81 26 60 Fax: +33 (0) 4 72 81 26 69 www.jonesshipman.com info@jonesshipman.com L. Kellenberger & Co. AG Heiligkreuzstrasse 28 9008 St.Gallen / Switzerland Tel: +41 (0) 71 242 91 11 Fax: +41 (0) 71 242 92 22 info@kellenberger.net L. Kellenberger & Co. AG Längfeldweg 107 2500 Biel-Bienne 8 / Switzerland Tel: +41 (0) 32 344 11 52 Fax: +41 (0) 32 341 13 93 Sales and service in USA & Canada: Hardinge Inc. One Hardinge Drive P.O. Box 1507 Elmira, New York 14902-1507 USA Tel: +1 (607) 734 2281 Fax: +1 (607) 735 0570 www.hardinge.com info@kellenberger.com Sales and service for China: Hardinge China Ltd. No.1388 Kangqiao Rd (East), Shanghai, China 201319 Tel: +86 21 3810 8686 Fax: +86 21 3810 8681 Service: Tel: +86 21 3810 8689 Sales: Tel: +86 21 3810 8686 ext 8403 www.hardinge.com.cn Usach Technologies Inc.. 1524 Davis Road Elgin, IL 60123 USA Tel: +1 (847) 888 0148 Fax: +1 (847) 888 0144 www.usach.com info@usach.com Your nearest Jones & Shipman Partner: Certificate No. FS 562751 - ISO 9001: 2008