ABB drives and motors catalogue 2005 PRODUCTS

ABB drives and motors catalogue 2005 PRODUCTS

ABB drives and motors Subhead 00-0000 Profile Welcome to the 2005 edition of ABB s drives and motors catalogue. Contained within, are the basic technical details and prices for our most commonly used products. However, our range of products, systems and services is far more extensive. Please do not hesitate to call us for any further information. Our details are on the back cover. Thank you Steve Ruddell General Manager, Drives & Motors Drive services Product services for our customers Services for all ABB drive series are based on the ABB drive lifecycle management model. With complete lifecycle support, you will always be aware of the support plans of your valuable assets. ABB has the largest drive service team of all drive suppliers with field service engineers located all over the world. Services offered include: Selection & dimensioning Training Installation & commissioning Support & remote services Maintenance & field services Spare parts & repair Migration & retrofits Replacement & recycling Refurbishment of classic equipment Channel partners ABB Drives Alliance is the UK s most comprehensive drives network, bringing levels of service never seen before in the UK drives industry. The 10 ABB Drives Alliance partners are strategically located around the UK and have one of the largest stock of AC drives available off-the-shelf. Drives within ABB s UK stock from 0.12 kw to 315 kw are instantly available. Each ABB Drives Alliance partner is able to access up-to-the-minute central stock information using ABB s on-line internet service. The members of the team have been handpicked by ABB because they are outstanding drives experts in their local area. To locate your nearest Drives Alliance Partner call 07000 DRIVES (07000 374837) ABB drives alliance Industries and Applications 2

Contents DRIVES ABB drives Quickfinder pages 4-5 ABB Motor Service Partners is a network of 15 independent companies that have pooled their resources to offer national and local customer access to: electric motors up to 200 kw extensive technical knowledge & back-up the best equipped repair and maintenance facilities in Europe common service standards throughout the UK common pricing access to ABB s motor design and technical support standardised reporting functions To locate your nearest ABB Motor Service Partner call 07000 MOTORS (07000 668677) ABB motor service partner ABB component drive pages 6-8 0.12 kw to 2.2 kw Supply voltage 110-240 V, 200-240 V Single phase and 3-phase ABB general machinery drive pages 9-11 0.12 kw to 2.2 kw Supply voltage 200-480 V, Single phase and 3-phase ABB decentralised drive pages 12-13 0.55 kw to 2.2 kw Supply voltage 380-480 V 3-phase ABB standard drive pages 14-17 0.75 kw to 355 kw Supply voltage 200-240 V, 380-480 V 3-phase ABB industrial drive pages 18-23 Single drives 0.55 kw to 2,800 kw Supply voltage 230 V, 380-415 V, 440-500 V, 525-690 V 3-phase DC drives and MV AC drives page 24 Software tools pages 25-26 MOTORS AC motors overview page 27 iconsys is ABB s partner for the sales and engineering of all DC drive solutions in the UK. As a system integrator the company offers a complete range of DC drive solutions to the metals, printing and material handling sectors. For more information call 01952 607300 General purpose pages 28-29 aluminium/steel motors TEFC low voltage motors, aluminium or steel frame IP 55, IC 411, single-speed General purpose page 29 cast iron motors TEFC low voltage motors, cast iron frame IP 55, IC 411, single-speed Process performance page 30 cast iron motors TEFC low voltage motors, cast iron frame IP 55, IC 411, single-speed Flameproof motors, 80-400, page 31 EEx d/e* IIB T4 TEFC low voltage motors, IP 55 IC 411, single-speed Non-sparking motors, 80-400, page 32 EExnA T3 cast iron frame TEFC low voltage motors, IP 55, IC 411, single-speed Optional extras for all page 33 motor types ABB LV motors - total market offer page 34 Faxback page 35 3

ABB drives Quickfinder Subhead The table below lists some important features of ABB drives. Its main purpose is to highlight the differences 00 between - 0000 the different product categories. For each category of products it is indicated whether a feature is available. Features ABB component drives (ACS50, ACS100 - p.6) ABB general machinery drives (ACS140 - p.9) 4 Voltage & power Supply options (assume 6-pulse as standard) Enclosure class Mechanical construction Motor control Software functionality/ features Programmability Start-up assistant Help key Real-time clock I/O Fieldbuses Cooling method EMC compliance (EN 61800-3) Harmonic filter / choke Dynamic braking HW options Switching frequency Safety options (dedicated hardware) PC tools Approvals Industry specific products ACS50, 110 V, 1-phase input, output 240 V, 3-phase as standard 12 pulse diode Regenerative 6-/12-pulse Low harmonic regenerative IP 00 IP 20 IP 21 IP 22 IP 42 IP 54/ IP 54R/ IP 55 IP 65 Module - panel mountable Wall-mounted (IP 21 minimum) Free-standing Cabinet-built by ABB DTC (open/closed loop) Sensorless vector Scalar, VVVF Basic Medium Advanced Parameter programming via keypad Block programming Control solutions for specific applications Analogue input/output Digital input/output Speed feedback Motor thermal protection relay Modbus PROFIBUS Modbus Plus DeviceNet LonWorks Ethernet ControlNet CANopen InterBus-S TCP/IP connection Direct air cooling Water cooling No EMC filter 2 nd unrestricted 1 st restricted 1 st unrestricted Choke Swinging choke (better harmonic performance) Resistor and/or chopper du/dt filters Sine filters Coated boards Common mode filter Cabinet options Prevention of unexpected start-up Emergency stop (CAT.0, CAT.1) DriveWindow Light DriveWindow DriveOPC DriveSize DriveAP CE HVAC Marine drive Crane, Winder, Extruder, Traverse, Test-Benches, Motion Control, Pump Control, Master-Follower 1-ph 100-120 V: 0.18-0.37 kw 1-ph 200-240 V: 0.18-2.2 kw 1-ph 200-240 V: 0.12-2.2 kw 3-ph 200-240 V: 0.37-2.2 kw (DIN mount) 1 / 0 3 / 1 / / n/a up to 16 khz 1-ph 200-240 V: 0.18-2.2 kw 3-ph 200-240 V: 0.37-2.2 kw 3-ph 380-480 V: 0.37-2.2 kw (DIN mount) 2 / 1 5 / 2 / n/a up to 16 khz = standard = option = not available = ACS100 only = ACS50 only = other global approvals such as UL, cul, CSA, C-Tick, GOST-R also applicable

5 ABB drives Quickfinder Subhead 00-0000 Subhead 00-0000 Pages 23 and 24 highlight other AC and DC drives offered by ABB which are not listed within this Quickfinder. ABB decentralised drives (ACS160 - p.12) 3-ph 380-480 V: 0.55-2.2 kw, or integrated onto the motor 2 / 1 5 / 2 n/a up to 8 khz ABB standard drives (ACS550 - p.14) 3-ph 208-240 V: 0.75-75 kw 3-ph 380-480 V: 0.75-355 kw 2 / 2 6 / 3+(3) (> 100 kw) up to 12 khz (ACH550) ABB industrial drives drive modules (ACS800-01, -02, -04, -11 - p.18) 3-ph 230 V: 0.55-200 kw 3-ph 400 V: 1.1-1450 kw 3-ph 500 V: 1.5-1850 kw 3-ph 690 V: 5.5-1900 kw (800-04) (800-01, -02, -11) (800-02) 3+(2) / 2+(2) 7+(6) / 3+(6) / / DTC ABB industrial drives Cabinet drives (ACS800-07, 17, - p.20) 3-ph 400 V: 45-1450 kw 3-ph 500 V: 55-1850 kw 3-ph 690 V: 45-2800 kw 3+(2) / 2+(2) 7+(6) / 3+(6) / / DTC

ABB component drive 0.12 kw to 2.2 kw Supply voltage 110-240 V, 200-240 V, single phase and 3-phase What is an ABB component drive? The ABB component drives meet the requirements of OEMs, installation companies and panel builders. It is a component that is bought, together with other components from a logistical distributor. The drive is stocked and the number of options and variants is optimised for logistical distribution. Where can it be used? Business/retail Washing machines Dryers Mixers Dishwashers Boring machines Tread mills Pizza ovens Car washing machines Vacuum cleaners Rotating billboards Sliding doors Gate drives Industry Pumps Fans Conveyors Gate control Material handling Mixers Industrial kitchen equipment Building automation HVAC Exhaust fans Boilers/ chillers Pumps Condenser fans Door openers What does it replace? Contactors Soft starters N-speed motors Triac The need for single phase cap start motors Highlights - ACS50 Quick and easy installation - less than 5 minutes No programming - easy and descriptive interface Compact size and narrow shape Ideal drive for DIN-rail mounting Low EMC emissions Silent motor Forward and reverse switch 2 mounting orientations IP 20 as standard No control panel required User interface via 3 DIP switches and a further 8 on/off function switches located on panel front Potentiometer option Integral EMC filter for 1st environment (EN61800-3), unrestricted distribution Optional first environment filter for extended cable runs Optimised switching frequency for noise (up to 16 khz) Highlights - ACS100 The ABB component drive has the option of a potentiometer Wide range of ramp times, 0.1 to 1800 seconds DC hold stop ensures stationary motor shaft IR compensation improves starting torque for heavy loads Parameter lock prevents tampering by unauthorised staff Optional DIN rail or flange mounting IP 20 enclosure Parameter copy between drives with detachable control panel Cost optimisation without the panel 2-year warranty 6

ABB component drive ACS50 - Ratings, types, voltages and prices ACS50 - main features Feature Notes Benefit No programming All inverter parameter settings are done with DIP Faster set-up switches and potentiometers Easier configuration Easier drive for new users Compact size and Up to 0.37 kw, 45 mm width; 2.2 kw, 67.5 mm width Less space required for installation narrow shape Removable mounting clip Removable clip allows DIN-rail and wall mounting Flexible and easy mounting from back and side of the unit EMC First environment. EMC filters as standard Low EMC emissions Automatic switching Increases switching frequency automatically, when Provides lowest possible noise without derating frequency drive temperature is decreased of the drive 110-240 V AC, single phase Output always capable of full 240 V, 3-phase, regardless of Can easily replace single phase cap start motors supplies supply voltage 200/240 V, 1-phase supply, 3-phase output 200/240 V Nominal Ratings Frame Dimensions kg Type Order Price Nominal Input Nom. Output Max H1 H2 W D code Current Current Output mm mm mm mm kw A A A With EMC filter 0.18 4.4 1.4 2.1 A 170 146.5 45 128 0.65 ACS50-01E-01A4-2 64759221 81 0.37 6.9 2.2 3.3 A 170 146.5 45 128 0.70 ACS50-01E-02A2-2 64759230 89 0.75 10.8 4.3 6.5 B 170 146.5 67.5 128 0.70 ACS50-01E-04A3-2 64759248 106 1.5 18.2 7.6 11.4 D 226 203 70 159 1.1 ACS50-01E-07A6-2 68322090 149 2.2 22 9.8 14.7 D 226 203 70 159 1.1 ACS50-01E-09A8-2 68322111 174 Without EMC filter 0.18 4.4 1.4 2.1 A 170 146.5 45 128 0.65 ACS50-01N-01A4-2 64748599 76 0.37 6.9 2.2 3.3 A 170 146.5 45 128 0.70 ACS50-01N-02A2-2 64759191 84 0.75 10.8 4.3 6.5 B 170 146.5 67.5 128 0.70 ACS50-01N-04A3-2 64759213 99 1.5 18.2 7.6 11.4 C 194 171 70 159 1.1 ACS50-01N-07A6-2 68322103 138 2.2 22 9.8 14.7 C 194 171 70 159 1.1 ACS50-01N-09A8-2 68322120 163 100/120 V, 1-phase supply, 3-phase output 200/240 V Nominal Ratings Frame Dimensions kg Type Order Price Nominal Input Nom. Output Max H1 H2 W D code Current Current Output mm mm mm mm kw A A A With EMC filter 0.18 6.4 1.4 2.1 A 170 146.5 45 128 0.65 ACS50-01E-01A4-1 68234204 88 0.37 9.5 2.2 3.3 A 170 146.5 45 128 0.70 ACS50-01E-02A2-1 68234212 98 Without EMC filter 0.18 6.4 1.4 2.1 A 170 146.5 45 128 0.55 ACS50-01N-01A4-1 64759264 85 0.37 9.5 2.2 3.3 A 170 146.5 45 128 0.60 ACS50-01N-02A2-1 64759272 92 Supply terminals L, N (R, S) Configuration switches Control potentiometers H1 H2 Relay output terminals Analogue input signal selector (U/I) Control terminal Motor terminals T1, T2, T3 (U, V, W) D W H1 = Height with mounting clip H2 = Height without mounting clip W = Width D = Depth 7

ABB component drive ACS100 - Ratings, types, voltages and prices ACS100 - main features Feature Note Benefit Simple parameter set Easy to navigate, program or set-up Flange mounting If the drive is to be installed on a surface Reduces size that provides sufficient cooling, it can be See general machinery drive, ACS140 for pictures supplied without the heat sink of the frame sizes S-ramp Enables drive to go down to creep speed Gives a more accurate stop before stopping Coast to stop Enables drive to come to stop under its Reduces strain on the machinery own inertia 3-wire control Can be connected to overriding Design flexibility control system Fault history Most recent fault logged Simplifies troubleshooting 200 V/ 240 V 1-phase supply with heatsink, 3-phase output Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Nom. Output Max H1 W D code Current Current Output mm mm mm kw A A A 0.12 2.7 1.0 1.5 A 146 80 149 0.9 ACS101-K18-1 4088 73 0.18 4.4 1.4 2.1 A 146 80 149 0.9 ACS101-K25-1 4118 79 0.25 5.4 1.7 2.6 A 146 80 149 0.9 ACS101-K37-1 4126 84 0.37 6.9 2.2 3.3 A 146 80 149 0.9 ACS101-K75-1 5955 92 0.55 9.0 3.0 4.5 A 146 80 149 0.9 ACS101-1K1-1 5963 100 0.75 10.8 4.3 6.5 B 146 80 186 1.2 ACS101-1K6-1 6030 121 1.1 14.8 5.9 8.9 C 218 80 169 1.6 ACS101-2K1-1 6048 153 1.5 18.2 7.0 10.5 C 218 80 169 1.6 ACS101-2K7-1 6056 178 2.2 22.0 9.0 13.5 D 245 80 176 1.9 ACS101-4K1-1 6064 207 200 V/ 240 1-phase supply heatsinkless, 3-phase output Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Nom. Output Max H1 W D code Current Current Output mm mm mm kw A A A 0.12 2.7 1.0 1.5 H 146 80 119 0.8 ACS101-H18-1 7893 73 0.18 4.4 1.4 2.1 H 146 80 119 0.8 ACS101-H25-1 7907 79 0.25 5.4 1.7 2.6 H 146 80 119 0.8 ACS101-H37-1 7915 84 0.37 6.9 2.2 3.3 H 146 80 119 0.8 ACS101-H75-1 7923 92 0.55 9.0 3.0 4.5 H 146 80 119 0.8 ACS101-1H1-1 7931 100 0.75 10.8 4.3 6.5 H 146 80 119 0.8 ACS101-1H6-1 7940 121 200 V/240 V 3-phase supply with heatsink, 3-phase output Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Nom. Output Max H1 W D code Current Current Output mm mm mm kw A A A 0.37 3.2 2.2 3.3 A 146 80 149 0.8 ACS103-K75-1 5971 92 0.55 4.2 3.0 4.5 A 146 80 149 0.8 ACS103-1K1-1 5980 100 0.75 5.3 4.3 6.5 B 146 80 186 1.1 ACS103-1K6-1 6072 121 1.1 7.2 5.9 8.9 C 218 80 169 1.5 ACS103-2K1-1 6081 153 1.5 8.9 7.0 10.5 C 218 80 169 1.5 ACS103-2K7-1 6099 178 2.2 12.0 9.0 13.5 D 245 80 176 1.8 ACS103-4K1-1 6102 207 * price excludes keypad 8

ABB general machinery drive 0.12 kw to 2.2 kw Supply voltage 200-480 V, single phase and 3-phase What is an ABB general machinery drive? These drives are designed for a wide range of machinery applications. Aimed at OEMs who build drives into machinery, they offer ease of installation and integration. For many applications the repeatability of the drive will have an impact on the quality of the machinery and must therefore be high. Because the drive is likely to be purchased in large quantities, the distribution costs are low. Smaller OEMs can buy an ABB general machinery drive from an authorised channel partner, whereas larger OEMs can access the drives directly from ABB. Where can it be used? Material handling Packaging Industry Pumps Fans Mixers Building Automation HVAC Condenser fans Exhaust fans Pumps Boilers/chillers ABB general machinery drive promises Very fast and accurate control High repeatability Fast and extensive I/O PID control Simple installation and integration Cost optimisation without the panel Highlights: IP 20 enclosure available Available with a multitude of mounting options - flange, heatsinkless, DIN etc. see page 11 Multifunction keypad for easy interfacing Fieldbus and PC connection options Detachable key pad Remote panel mounting Fieldbus connection Simple to start up and use What are its main features? Feature Notes Benefit Application macros Pre-written parameter set-ups Fast commissioning and programming Heatsink Heatsink is located outside the enclosure Majority of power loss is external thereby enhancing the component life and increasing the reliability of the drive Drive can be delivered without a heatsink Useful when space is limited. User has to provide an installation surface with sufficient cooling I/O Fast and extensive Caters for a wide range of applications Mounting 3 variations available: Wall Traditional and easy to fix DIN rail Multiple drives mounted in panel Flange PID control Internal closed loop controller No need to purchase separate items 9

ABB general machinery drive ACS140 - Ratings, types, voltages and prices 200/240 V 1-phase supply with heatsink, IP 20 Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Output Max Output H W D code Current Current Current mm mm mm kw A A A 0.12 2.7 1.0 1.5 A 146 80 149 0.9 ACS141-K18-1 4011 79.00 0.18 4.4 1.4 2.1 A 146 80 149 0.9 ACS141-K25-1 4037 87.00 0.25 5.4 1.7 2.6 A 146 80 149 0.9 ACS141-K37-1 4045 101.00 0.37 6.9 2.2 3.3 A 146 80 149 0.9 ACS141-K75-1 5998 115.00 0.55 9.0 3.0 4.5 A 146 80 149 0.9 ACS141-1K1-1 6005 123.00 0.75 10.8 4.3 6.5 B 146 80 186 1.2 ACS141-1K6-1 6111 148.00 1.1 14.8 5.9 8.9 C 218 80 169 1.6 ACS141-2K1-1 6129 187.00 1.5 18.2 7.0 10.5 C 218 80 169 1.6 ACS141-2K7-1 6137 220.00 2.2 22.0 9.0 13.5 D 245 80 176 1.9 ACS141-4K1-1 6145 242.00 200/240 V 1-phase supply heatsinkless, IP 20 Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Output Max Output H W D code Current Current Current mm mm mm kw A A A 0.12 2.7 1.0 1.5 H 146 80 119 0.8 ACS141-H18-1 7958 79.00 0.18 4.4 1.4 2.1 H 146 80 119 0.8 ACS141-H25-1 7966 87.00 0.25 5.4 1.7 2.6 H 146 80 119 0.8 ACS141-H37-1 7974 101.00 0.37 6.9 2.2 3.3 H 146 80 119 0.8 ACS141-H75-1 7982 115.00 0.55 9.0 3.0 4.5 H 146 80 119 0.8 ACS141-1H1-1 7991 123.00 0.75 10.8 4.3 6.5 H 146 80 119 0.8 ACS141-1H6-1 8008 148.00 380/480 V 3-phase supply with heatsink, IP 20 Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Output Max Output H W D code Current Current Current mm mm mm kw A A A 0.37 2.0 1.2 1.8 A 146 80 149 0.8 ACS143-K75-3 4061 174.00 0.55 2.8 1.7 2.6 A 146 80 149 0.8 ACS143-1K1-3 4070 186.00 0.75 3.6 2.0 3.0 B 146 80 186 1.1 ACS143-1K6-3 6196 209.00 1.1 4.8 2.8 4.2 C 218 80 169 1.5 ACS143-2K1-3 6200 232.00 1.5 5.8 3.6 5.4 C 218 80 169 1.5 ACS143-2K7-3 6218 256.00 2.2 7.9 4.9 7.4 D 245 80 176 1.8 ACS143-4K1-3 6226 287.00 380/480 V 3-phase supply heatsinkless, IP 20 Nominal Ratings Frame Dimensions kg Type Order Price* Nominal Input Output Max Output H W D code Current Current Current mm mm mm kw A A A 0.37 2.0 1.2 1.8 H 146 80 119 0.8 ACS143-H75-3 8016 174.00 0.55 2.8 1.7 2.6 H 146 80 119 0.8 ACS143-1H1-3 8024 186.00 0.75 3.6 2.0 3.0 H 146 80 119 0.8 ACS143-1H6-3 8032 209.00 1.1 4.8 2.8 4.2 H 146 80 119 0.8 ACS143-2H1-3 8041 232.00 NOTE: 200/240 V 3-phase supply with heatsink, IP 20 also available on request *prices exclude keypad 10

ABB general machinery drive Subhead Mounting options In addition to the conventional wall mounting and time-saving DIN rail mounting, the general machinery drive also offers flange-mounting. The heatsink is located outside the enclosure and hence the major share of the power loss is external to the enclosure. Heatsinkless series In cases where space is a limitation, drives without a heatsink can be delivered as standard. The user has to provide an installation surface with sufficient cooling. For more information, please refer to the ACS140 User s Manual (call 07000 DRIVES). heatsinkless wall mounting mounting on DIN rail flange mounting Dimensions 146mm 146mm 146mm 218mm 245mm 80mm frame size H Options 119mm 149mm 186mm 169mm 80mm 80mm 80mm 80mm frame size A frame size B frame size C frame size D RS 485/232 Adapter Type code: ACS140 RS 485/232-24.00 Controlling the ACS140 drive via Modbus or DriveWindow Light 2 software requires replacement of the panel with the RS 485/232 adapter. When the adapter is used, several ACS140 units can be controlled using Modbus protocol. Control Panel Type code: ACS100 - PAN - 23.00 ACS140 drives can be bought with or without a detachable control panel. 176mm ABC fieldbus modules Type codes: ABC-PDP and ABC-DEV Up to ten drives can be controlled with one ABC fieldbus module. ABC modules are available for PROFIBUS (type code ABC-PDP) and DeviceNet (type code ABC-DEV) fieldbus protocols. Input and output chokes Output chokes are used when motor cables above normal length are required. Optional input chokes can be used with the ACS140 whenever there is a notchy supply network. Panel Extension Cable Kit Type code: PEC-98-0008 - 17.00 This option includes a gasket, a 3 m connection cable for control panels, fixing material for the cables and a drilling jig. With this kit IP 65 protection class is achieved. Brake choppers Range of external brake choppers is available. 11

ABB decentralised drive 0.55 kw to 2.2 kw Supply voltage 380-480 V, 3-phase What is an ABB decentralised drive? An ABB decentralised drive is an integrated motor and drive package that places the drive near the motor, in areas that are easily accessible. Alternatively, it allows the drive to be physically attached to the motor. The drive and motor are delivered as an integrated, ready-to-use package that are perfectly matched. ABB decentralised drive promises Reduced cabling costs Lower maintenance Space saving - no control cabinet required Easy installation and commissioning Good fieldbus communications for decentralised control Because the drives are close to the process, they must meet the requirements of relatively harsh environments and the IP class must be high, typically IP 65. For more demanding applications, an optional IP 65 control panel can be used to select from a range of more advanced application macros. Where can it be used? This type of drive is forecast to have an impact on sectors such as the automotive industry and conveyor machinery especially where it is convenient to mount the drive near to the motor. Typical industries include: Dairies Food processing Automotive Conveyor machinery What are its main features? Feature Notes Benefit Application macros Pre-written parameter set-ups Fast commissioning and programming Brake chopper Built-in resistor is mounted externally Less additional cabling EMC Built-in Meets all needs for first environment EMC requirements Enclosure Robust and vibration tested, tight, aluminium IP 65 Ideal for demanding applications where water may enclosure with varnished electronic boards be present Fieldbus options Can be part of every major industrial and domestic Saves time and money by linking up with existing control system control systems, while improving system efficiency Motors Compatible with ABB motors and other manufacturers Easy to covert a fixed speed motor to variable speed operation Mounting Can be installed in any position on wall or on motor Brings flexibility to allow applications that would otherwise be limited to fixed speed use When motor mounted, no cabinet space is required PID control Suitable for HVAC systems and applications needing No additional external controllers needed closed loop Positioning application Allows simple positioning tasks. Requires encoder Conveyors can be positioned without additional equipment macro 12

ABB decentralised drive ACS160 - Ratings, types, voltages and prices Nominal ratings Frame Type Order Price Nominal Input Cont. Max. code kw current output current A current 150% A A PN I1N I2N 1) IMAX 2) *Motor mounted, IP 65, 380-500 V, 3-phase (2nd environment, excluding motor mounting kit and keypad) 0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-A 64678035 348.00 0.75 2.2 2.4 3.6 R1 ACS163-1K6-3-A 64678043 367.00 1.1 3.2 3.4 5.1 R1 ACS163-2K1-3-A 64678051 389.00 1.5 4.1 4.1 6.2 R1 ACS163-2K7-3-A 64678060 415.00 2.2 6.0 5.4 8.1 R2 ACS163-4K1-3-A 64678078 494.00 *Motor mounted, IP 65, 380-500 V, 3-phase (1st environment, excluding motor mounting kit and keypad) 0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-B 64315374 449.00 0.75 2.2 2.4 3.6 R1 ACS163-1K6-3-B 64315382 473.00 1.1 3.2 3.4 5.1 R1 ACS163-2K1-3-B 64315404 499.00 1.5 4.1 4.1 6.2 R1 ACS163-2K7-3-B 64315412 531.00 2.2 6.0 5.4 8.1 R2 ACS163-4K1-3-B 64315421 611.00 Wall mounted, IP 65, 380-500 V, 3-phase (2nd environment, excluding filter, including keypad) 0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-D 64351427 413.00 0.75 2.2 2.4 3.6 R1 ACS163-1K6-3-D 64351443 434.00 1.1 3.2 3.4 5.1 R1 ACS163-2K1-3-D 64351451 461.00 1.5 4.1 4.1 6.2 R1 ACS163-2K7-3-D 64351460 489.00 2.2 6.0 5.4 8.1 R2 ACS163-4K1-3-D 64351478 571.00 Wall mounted, IP 65, 380-480 V, 3-phase (1st environment, with filter, including keypad) 0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-E 64351486 516.00 0.75 2.2 2.4 3.6 R1 ACS163-1K6-3-E 64351494 541.00 1.1 3.2 3.4 5.1 R1 ACS163-2K1-3-E 64351508 571.00 1.5 4.1 4.1 6.2 R1 ACS163-2K7-3-E 64351516 606.00 2.2 6.0 5.4 8.1 R2 ACS163-4K1-3-E 64351524 689.00 1) Power stages are designed for continuous I2 /I2NSQ current. These values apply at altitudes of less than 1000m ASL. Current limits for squared torque are not valid if the ACS 160 drive is used on top of a non ABB motor. 2) 150% of nominal current I2N allowed for one minute every 10 minutes. * Drives complete with motor pre-assembled, can also be quoted on application. Dimensions of motor mounting unit Frame A B C D E Weight size mm mm mm mm mm kg 2nd environment R1 99 112 157 221 171 3.9 R2 99 112 157 261 171 4.6 1st environment R1 135 149 157 221 171 5.5 R2 135 149 157 261 171 6.3 E A C D B Dimensions of wall mounting unit Frame A B C Weight size mm mm mm kg 2nd environment R1 317 134 171 5.1 R2 357 134 171 5.8 1st environment R1 317 171 171 6.7 R2 357 171 171 7.5 C Options Control Panel: CA-PAN-L 41.00 Fieldbus: PROFIBUS, InterBus-S, CANopen and DeviceNet are available Mounting: to non ABB motors available B A 13

ABB standard drive 0.75 kw to 355 kw Supply voltage 380-480 V 00-0000 What is an ABB standard drive? The ABB standard drive is simple to buy, install, configure and use, saving considerable time. It is widely available through ABB s distributors. The drive has common user and process interface, common software tools for sizing, commissioning, maintenance and common spare parts. A wide range of fieldbus options gives excellent connectivity. Where can it be used? The ABB standard drive can be used in a wide range of industries. Typical applications include pump, fan and constant torque use, such as conveyors. The ABB standard drive is ideal in those situations where there is a need for simplicity to install, commission and use and where customising or special product engineering is not required. What are its main features? ABB standard drive promises Precise delivery Quick installation Rapid start-up Trouble-free use Highlights: Assistant control panel providing intuitive use of the drive Patent pending swinging choke for superior harmonic reduction Sensorless vector and scalar control Integral EMC filter for 1st and 2nd environment as standard Flexible fieldbus system with built-in Modbus and numerous internally mountable fieldbus adapters CE, UL and cul approved Feature Note Benefit Application macros Ready-made macros for common applications Fast set-up Assistant control panel Two soft-keys, function of which changes according to the state of the panel Easy commissioning Built-in Help button, giving programming hints Fast set-up Real-time clock, allows timed tracing of faults and setting of parameters to Easier configuration activate at various times of day Rapid fault diagnosis Changed parameters menu Quick access to all parameter changes Diagnostic assistant Activated when fault occurs Quick fault diagnostics Maintenance assistant Monitors running hours, motor rotation, MWh consumed and cooling fan Takes care of preventative maintenance of run time drive, the motor or driven application Start-up assistant Guides user through all essential settings without going to parameter list Easy set-up of parameters Clone drives Copy parameters from drives of differing rating or software versions Easy to copy parameters to other drives Changed parameters Drive keeps a sub list of only the parameters that have been changed These are the only parameters that from default need remembering Brake chopper Built-in up to 11 kw Reduced cost Chokes Swinging DC chokes - matches the right inductance to the right load, Reduces Total Harmonic Distortion (THD) thereby suppressing and reducing harmonics emissions up to 25% Connectivity Simple to install: Reduced installation time Easy connection of cables Secure cable connections Easy connection to site fieldbus systems through multiple Enhanced connectability to suit needs I/Os, plug-in options and built in protocols EMC 1st and 2nd environment RFI filters as standard No need for additional external filtering Fieldbus Built-in Modbus using RS 485 Reduced cost Optional plug-in fieldbus modules Intuitive features Noise optimisation: Considerable motor noise reduction Increases switching frequency of drive when drive temperature is reduced Reduces inverter noise and improves Controlled cooling fan: Drive is cooled only when necessary energy efficiency Mounting template Supplied separately with unit Quick and easy to mark mounting screw holes on installation surface Sensorless vector control Improved motor control performance Enables wider range of applications Cable pedestal Separate cabling arrangement for larger drives Deliver pedestal, connect cables then wheel drive over the top Low peak volts and du/dt Motor peak voltage and rate of rise meets IEC60034-17 Kind to motor windings Swinging choke Low THD even at reduced motor loads 25% less supply distortion. Meets requirements of G5/4 14

ABB standard drive 0.75 kw to 355 kw Supply voltage 380-480 V (230 V) 00-0000 Wall mounted - 0.75 to 110 kw, 380-480 V (230 V also available) Wall mounted, frame sizes R1-R6 IP 21 as standard IP 54 as option Built-in EMC filter Standard software Built-in Modbus interface Cable connection box Brake chopper in frame sizes R1-R2 Assistant control panel Built-in patented swinging choke (R1-R4) Sensorless vector control, scalar control For further information, see technical catalogue, ABB standard drive ACS550, 0.75 kw - 355 kw code 3AFE 64792857EN Free standing - 110 to 355 kw, 380-480 V Free standing, frame sizes R7-R8 IP 21 as standard Built-in EMC filter Standard software Built-in Modbus interface Pedestal unit on wheels Assistant control panel Sensorless vector control, scalar control For further information, see technical catalogue, ABB standard drive ACS550, 0.75 kw - 355 kw code 3AFE 64792857EN Assistant control panel For easy drive programming, a detachable, multi-lingual alphanumeric assistant control panel is delivered as standard. The control panel has various assistants and a built-in help function to guide the user. It includes a real time clock, which can be used during fault logging and in controlling the drive, such as start/stop. The control panel can be used for copying parameters for back up or for downloading to another drive. A large graphical display and soft keys make it extremely easy to navigate. Name Start Function Initiates operation of drive Local/Remote indication Motor rotation indicator Speed reference Stop Up Down Ceases operation of drive Changes parameters and their value/increases reference Changes parameters and their value/decreases reference Loc/Rem Changes drive state from local control (control panel) to remote control (I/O or other external source) HELP Built-in Help button Actual value 2, Output current (selectable) Actual value 3, Process value (selectable) Soft key 2 function Real time clock Soft key 1 function Soft key 1 Soft key 2 Function changes according to state of panel Function changes according to state of panel 15

ABB standard drive ACS550 - Ratings, types, voltages and prices 00-0000 Wall mounted drives 3-phase supply voltage 380-480 V Ratings Frame Type Order IP 21 IP 54 Normal use Heavy-duty use code Price (+B055) Price PN I2N Phd I2hd kw A kw A 1.1 3.3 0.75 2.4 R1 ACS550-01-03A3-4 3AUA0000003385 380.00 430.00 1.5 4.1 1.1 3.3 R1 ACS550-01-04A1-4 3AUA0000003386 450.00 500.00 2.2 5.4 1.5 4.1 R1 ACS550-01-05A4-4 3AUA0000003387 470.00 520.00 3 6.9 2.2 5.4 R1 ACS550-01-06A9-4 3AUA0000002415 510.00 560.00 4 8.8 3 6.9 R1 ACS550-01-08A8-4 3AUA0000002419 580.00 630.00 5.5 11.9 4 8.8 R1 ACS550-01-012A-4 3AUA0000002420 680.00 730.00 7.5 15.4 5.5 11.9 R2 ACS550-01-015A-4 3AUA0000002412 780.00 840.00 11 23 7.5 15.4 R2 ACS550-01-023A-4 3AUA0000002417 940.00 1,000.00 15 31 11 23 R3 ACS550-01-031A-4 3AUA0000002418 1,190.00 1,290.00 18.5 38 15 31 R3 ACS550-01-038A-4 3AUA0000002431 1,530.00 1,640.00 22 44 18.5 38 R4 ACS550-01-044A-4 3AUA0000002545 1,780.00 1,870.00 30 59 22 44 R4 ACS550-01-059A-4 3AUA0000002546 2,160.00 2,320.00 37 72 30 59 R4 ACS550-01-072A-4 3AUA0000002547 2,500.00 2,650.00 45 96 37 77 R5 ACS550-01-096A-4 64726846 3,070.00 3,280.00 55 124 45 96 R6 ACS550-01-124A-4 64726811 3,850.00 4,260.00 75 157 55 124 R6 ACS550-01-157A-4 64726820 4,690.00 5,100.00 90 180 75 156 R6 ACS550-01-180A-4 64726838 5,690.00 6,110.00 110 195 90 162 R6 ACS550-01-195A-4 68294479 6,450.00 6,900.00 Free standing units 3-phase supply voltage 380-480 V Ratings Frame Type Order IP 21 Normal use Heavy-duty use code Price PN I2N Phd I2hd kw A kw A 132 245 110 192 R7 ACS550-02-245A-4 64727010 7,340.00 160 289 132 224 R7 ACS550-02-289A-4 64727028 8,630.00 200 368 160 302 R8 ACS550-02-368A-4 64727044 10,420.00 250 486 200 414 R8 ACS550-02-486A-4 64727061 11,930.00 280 526 250 477 R8 ACS550-02-526A-4 64727079 13,180.00 315 602 280 515 R8 ACS550-02-602A-4 64727087 14,440.00 355 645 315 590 R8 ACS550-02-645A-4 64727095 16,280.00 Voltages: 208-240 V also available. Prices and ratings on application Normal use versus heavy-duty use For the majority of pump, fan and conveyor applications, select Normal use figures. For high overload requirements, select Heavy-duty use figures. If in doubt contact your local ABB sales office or your drives distributor - see back cover. PN for kw = Typical motor power in 400 V at normal use (110% overload) Phd for kw = Typical motor power in 400 V at heavy-duty use (150% overload) 16

ABB standard drive ACS550 - Dimensions and options 00-0000 Dimensions Wall mounted units D W H2 H1 H1 = Height with cable connection box H2 = Height without cable connection box W = Width D = Depth Free standing units H1 W D Wall mounted units Frame size Dimensions and weights IP 21 / UL type 1 IP54 / UL type 12 H1 H2 W D kg H W D kg mm mm mm mm mm mm mm R1 369 330 125 212 6.5 441 213 238 8.2 R2 469 430 125 222 9 541 215 245 11.2 R3 583 490 203 231 16 604 257 276 18.5 R4 689 596 203 262 24 723 257 306 26.5 R5 739 602 265 286 34 776 369 309 38.5 R6 880 700 300 400 69 924 410 423 80 IP 54 - price on application Free standing units Frame size Dimensions and weights IP 21 / UL type 1 IP54 / UL type 12 H1 H2 W D kg H W D mm mm mm mm mm mm mm R7 1507 n/a 250 1) 520 1) 115 n/a n/a n/a R8 2024 n/a 347 1) 617 1) 230 n/a n/a n/a 1) The dimensions apply to bookshelf mounting. In flat type mounting the width and depth change places. Options Available options Protection class IP 54 Coated boards (available later) Control panel If no control panel is required it can be removed Basic control panel, with no clock or assistants I/O options 1 Extended relay output, 3 extra relay outputs Fieldbus 2 DeviceNet LonWorks PROFIBUS-DP CANopen ControlNet 1 One slot available for relay extension board 2 One slot available for fieldbus adapter. Modbus built-in as standard. Panel mounting kit The panel mounting kit enables mounting of control panels on cabinet doors. This kit includes a 3 m extension cable, a gasket, mounting screws and a mounting template. DriveWindow Light 2 DriveWindow Light 2 is PC software used for rapid commissioning and controlling of drives. It has features for programming, monitoring, trouble shooting and maintenance. It is also a set-up and control tool which is Win98, WinNT, Win2000 and WinXP compatible. Output chokes Output chokes are used when motor cables above normal length are required. Cable can be roughly 1.5 times standard cable length. The maximum switching frequency with output chokes is 4 khz. Brake units and choppers Frame sizes R1 to R2 are delivered with integrated brake choppers as standard. Other units can use the compactsized brake units which include brake chopper and resistor. For more information please refer to the ACS- BRK Brake Units Installation and Start-up Guide. 17

ABB industrial drive What is an ABB industrial drive? ABB industrial drives are highly flexible AC drives, that can be customised to meet the precise needs of industrial applications. They cover a wide range of powers and voltages, including industrial voltages up to 690 V. ABB industrial drives have a wide range of options, many of which are built-in. Programmability is a key feature of these drives. Order-based customisation is an integral part of the offering. Where can it be used? The ABB industrial drive is suitable for pump, fan and constant torque applications as well as high performance applications. Such applications include winders, extruders, mono-rails, engine test rigs, compressors, cranes, renewable energy and centrifuges. The majority of ABB industrial drives are sold to system integrators, OEMs and end-users. The drive has ATEX certification with ABB s EExd, EExde and EExna motors and has marine certification for Lloyds and DNV. ABB industrial drive promises Drives customised at ordering stage Easy installation Flexibility to program more advanced applications Highlights Blanket ATEX certification (Ex) with ABB s motors Innovative and specific hardware variants to meet exact needs of the application and customer groups Specialised software variants for selected applications Adaptive programming like having PLC inside the drive Direct Torque Control well proven control platform Common features across power range Common user and process interface with fieldbus Common software tools for sizing, commissioning, maintenance Common spare parts All major types of drive topology covered - 6-pulse, 12-pulse, 4Q, aircooled, water cooled, etc What are its main features? Feature Notes Benefit 18 Built to order product Customer can specify a wide range of options and Always meets application needs build variants Adaptive programming Small PLC inside your drive as standard Needs no additional hardware or software 15 programmable function blocks. Up to 200 blocks by Program drive on-site during commissioning loading multiblock software Create own I/O signals, modify speed or torque reference chain, set a timer or generate a message Application macros Preconfigured parameter settings Fast setting for many applications Brake choppers Built-in to all units (when ordered) Reduced costs, high performance, internal monitoring No additional space or installation time needed Cable terminals Big enough even for aluminium & SWA cables Direct connection of armoured cables Chokes Built-in harmonic filtering and drive protection Reduces THD emissions Compact size Contains EMC filter and chokes inside the drive No extra space or cabling is needed Cooling fan Silent long-lifetime cooling fan, that switches on and off Reduced maintenance, time and cost Direct Torque Control Full torque at zero speed without encoder Consistently excellent performance ensures that Accurate speed and torque control drive is not the limiting factor in process EMC 2nd environment RFI filters as standard No need for additional external filtering, or additional 1st environment optional space, or additional cabling between drives and filter Fieldbus gateway Snap-on module that is easily mounted inside drive Wide range of gateways means choice of automation system becomes independent of drive manufacturer I/O Extensive and flexible I/O provides No need for additional space or cabling additional analog or digital connections IP rating Available in IP 21, IP 42, IP 54 or IP 55 No need for separate cabinet for wall mounted units Option modules Space available for three option modules for I/O All connections built-in. Uses same modules as extensions, fieldbuses, pulse encoder or PC connection standard drive Start-up assistant Guides user through all essential settings without going Easy set-up of parameters to parameter list Your own language On-line info system always available Huge range of Special variants for wall, cabinet mount, 4Q, pre-built There is always an ABB industrial drive variant that fits hardware variants cabinets, drive kits, water-cooled the specification Low peak volts Motor peak voltage and rate of rise meets IEC60034-17 Kind to motor windings and du/dt

ABB industrial drive Single drives 0.55 kw to 2,800 kw Wall mounted drives - see page 21 Series ACS800-01 Power range 0.55-110 kw, (230-690 V) IP 21 as standard, IP 55 as option Wide range of built-in options Optional cable box for SWA cables Coated boards and internal I/O options Built-in brake chopper EMC filter for 1st environment, restricted distribution according to EN 61800-3 - optional EMC filter for 2nd environment, unrestricted distribution according to EN 61800-3 - standard Internal fieldbus options Series ACS800-11, regenerative drives (price on application) Power range 7.5 to 110 kw, (230-500 V) IP 21 as standard Active supply unit can regenerate energy back to the mains. Together with built-in LCL line filtering, it provides a low harmonic drive solution in one package For further information, see technical catalogue, ABB industrial drives, ACS800, stand-alone single drives, 0.55 kw - 2,800 kw code: 3AFE 68375126 EN For further information about the ACS 800-01 marine drive, see technical catalogue, ABB drives for marine ACS 800-01, 0.75 kw - 110 kw code: 3AFE 68326753 EN For further information, see technical catalogue, ABB industrial drive ACS 800-11, 7.5 kw - 110 kw code: 3AFE 68440807 EN Free standing drives - see page 22 Series ACS800-02 Power range 45-560 kw, (230-690 V) IP 21 standard Extremely compact, can be mounted in 2 orientations Bookshelf or flat mounting options EMC and brake chopper built-in Three I/O and fieldbus extension slots inside Innovative pedestal enclosure for ease of cabling - pedestal can be supplied in advance Drive module on wheels Can be provided with an enclosure extension with additional options and local isolation Long lifetime cooling fan and capacitors Large power terminals allowing the use of a wide range of cable sizes For further information, see technical catalogue, ABB industrial drives, ACS 800, stand-alone single drives, 0.55 kw - 2,800 kw code: 3AFE 68375126 EN 19

ABB industrial drive Single drives 0.55 kw to 2,800 kw Chassis mounted - single drives - see page 21 Series ACS800-04 and ACS800-04M 0.55-1,900 kw (230 V - 690 V) IP 00 kits or IP 20 modules depending on frame size Separate controllers linked by optical cables for galvanic isolation Optimised design for cabinet assembly Easy access to power terminals, plug connections on wheeled units Compact design Side by side mounting (excl. versions with side exit) Harmonic filtering choke inside Long lifetime cooling fan and capacitors Extensive, programmable I/O with galvanically isolated inputs Three I/O and fieldbus extension slots inside Block programming possibility ACS800-04M can be ordered as disassembled parts to optimise the items purchased Rittal assembly kits available for easy cabinet integration Innovative, patented mounting for higher packing density Cabinet built drives - see page 22 Series ACS800-07 Power range 45-2,800 kw, (380-690 V) IP 21 as standard, IP 22, IP 42, IP 54 and IP 54R as options Up to 500 kw, based on a single module including rectifier and inverter Above 500 kw separate rectifier and inverter modules that have plug-in power connectors for easy maintenance and redundancy. Modules wheel in and out of cabinet 6- or 12-pulse operation as standard Extremely compact, internal swinging gate for control options Factory built cabinet which comes EMC and thermally type tested for trouble free operation Extensive range of standard options For further information, see technical catalogue, ABB industrial drives, ACS 800, stand-alone single drives, 0.55 kw - 2,800 kw code: 3AFE 68375126 EN 20

ABB industrial drive ACS800-01, ACS800-04 - Ratings, types, voltages and prices Wall mounted drives No-overload Light Heavy-duty Type Frame IP 21 IP 55 use overload use Price (+B056) Pcont. max Icont.max Imax PN IN Phd Ihd Price kw A A kw A kw A Three phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V) 1.5 5.1 6.5 1.5 4.7 1.1 3.4 ACS800-01-0003-3 R2 820 951 2.2 6.5 8.2 2.2 5.9 1.5 4.3 ACS800-01-0004-3 R2 860 991 3 8.5 10.8 3 7.7 2.2 5.7 ACS800-01-0005-3 R2 930 1,061 4 10.9 13.8 4 10.2 3 7.5 ACS800-01-0006-3 R2 1,050 1,181 5.5 13.9 17.6 5.5 12.7 4 9.3 ACS800-01-0009-3 R2 1,160 1,291 7.5 19 24 7.5 18 5.5 14 ACS800-01-0011-3 R3 1,290 1,465 11 25 32 11 24 7.5 19 ACS800-01-0016-3 R3 1,490 1,665 15 34 46 15 31 11 23 ACS800-01-0020-3 R3 1,730 1,905 22 44 62 18.5 41 15 32 ACS800-01-0025-3 R4 2,070 2,303 30 55 72 22 50 18.5 37 ACS800-01-0030-3 R4 2,370 2,603 37 72 86 30 69 22 49 ACS800-01-0040-3 R5 2,580 2,830 45 86 112 37 80 30 60 ACS800-01-0050-3 R5 3,130 3,380 55 103 138 45 94 37 69 ACS800-01-0060-3 R5 3,690 3,940 75 141 164 55 132 45 97 ACS800-01-0070-3 R6 4,290 4,698 90 166 202 75 155 55 115 ACS800-01-0100-3 R6 5,010 5,418 110 202 282 90 184 75 141 ACS800-01-0120-3 R6 5,940 6,348 Other voltages are available, 230 V, 500 V, 690 V, Price on application Includes 2nd environment EMC filter Wall mounted (module), dimensions IP 21 IP 55 Frame H1 H2 W1 Depth Weight H1 W1 Depth Weight size mm mm mm mm kg mm mm mm kg R2 405 370 1) 165 226 9 528 263 242 16 R3 471 420 1) 173 265 12 528 263 273 18 R4 606 490 1) 240 274 26 774 377 278 32 R5 739 602 1) 265 286 37 775 377 308 50 R6 880 700 1) 300 400 67 923 420 427 77 H1 = Height with cable connection box H2 = Height without cable connection box W1 = Width of the standard unit 1) ACS 800-01 without cable connection box does not fulfill IP 21 requirements Chassis mounting No-overload Light Heavy-duty Type Frame IP 00 use overload use Price Pcont. max Icont.max Imax PN IN Phd Ihd kw A A kw A kw A Three phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V) 110 206 326 110 202 90 163 ACS800-04/04M-0140-3 R7 6,000 132 248 404 132 243 110 202 ACS800-04/04M-0170-3 R7 7,250 160 289 432 160 284 132 240 1) ACS800-04/04M-0210-3 R7 8,480 200 445 588 200 440 160 340 ACS800-04/04M-0260-3 R8 9,970 250 521 588 250 516 200 370 ACS800-04/04M-0320-3 R8 11,410 315 602 840 315 590 250 477 ACS800-04/04M-0400-3 R8 12,820 355 693 1017 355 679 315 590 2) ACS800-04/04M-0440-3 R8 14,420 400 720 1017 400 704 355 635 3) ACS800-04/04M-0490-3 R8 16,280 1) 2) 3) See Table Notes, right Other voltages available on application Drive can be purchased pre-assembled or as a disassembled kit, where parts can be omitted for cost optimisation by panel builders Chassis mounting, dimensions Bookshelf mounting Type Height Width Depth Weight mm mm mm kg R7 1121 426 467 100 R8 1558 571 564 205 Flat type mounting Type Height Width Depth Weight mm mm mm kg R7 1152 631 259 100 R8 1589 779 356 205 H1 H2 Removable cable connection box For Wall mounting use H1 dimension. For Panel mounting use H2 TABLE NOTES Nominal Ratings: Icont.max : rated current available continuously without overloadability at 40 C. Imax : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% P hd. Typical Ratings: No-overload use Pcont.max : typical motor power in nooverload use. Light-overload use IN : continuous current allowing 110% IN for 1min/ 5 min at 40 C. PN : typical motor power in lightoverload use. Heavy-duty use Ihd : continuous current allowing 150% Ihd for 1min/ 5 min at 40 C. Phd : typical motor power in heavy-duty use. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply at 40 C ambient temperature. At higher temperatures (up to 50 C) the derating is 1%/1 C. Notes: 1) 50% overload available if Tamb < 25 C. If Tamb = 40 C, max overload for 1 min is 37%. 2) 50% overload available if Tamb < 30 C. If Tamb = 40 C, max overload for 1 min is 40%. 3) 50% overload available if Tamb < 20 C. If Tamb = 40 C, max overload for 1 min is 30%. 21

ABB industrial drive ACS800-02, ACS800-07 - Ratings, types, voltages and prices Free standing (with pedestal) No-overload Light Heavy-duty Type Frame Price use overload use 22 Pcont. max Icont.max Imax PN IN Phd Ihd kw A A kw A kw A Three phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V) 110 206 326 110 202 90 163 ACS800-02-0140-3 R7 6,250 132 248 404 132 243 110 202 ACS800-02-0170-3 R7 7,560 160 289 432 160 284 132 240 1) ACS800-02-0210-3 R7 8,850 200 445 588 200 440 160 340 ACS800-02-0260-3 R8 10,420 250 521 588 250 516 200 370 ACS800-02-0320-3 R8 11,930 315 602 840 315 590 250 477 ACS800-02-0400-3 R8 13,420 355 693 1017 355 679 315 590 2) ACS800-02-0440-3 R8 15,110 400 720 1017 400 704 355 635 3) ACS800-02-0490-3 R8 17,060 1) 2) 3) See Table Notes, right Free-standing with enclosure extension. Priced with fuse switch isolator Other options: top exit/entry, meter thermistor, emergency stop contactor Other voltage ranges available, 230 V, 500 V, 690 V. Price on application Prices with enclosure extension on application Free standing (with pedestal), dimensions IP 21 Frame H1 H2 W1 W2 Depth Weight Weight with size mm mm mm mm mm kg enclosure extension*) kg R7 1507 N/A 250 1) 602 520 1) 2) 110 234 R8 2024 N/A 347 1) 793 617 1) 2) 240 450 *) Weights are for the basic configuration with switch fuse, but without contactor and other options. H1 = Height with cable connection box H2 = Height without cable connection box Free standing (cubicle) W1 = Width of the standard unit W2 = Width with enclosure extension N/A = not available 1) The dimensions apply to bookshelf mounting. In flat type mounting the width and depth change places. 2) With enclosure extension the depth is increased by 25 mm due to the switch fuse handle. No-overload Light Heavy-duty Type Frame Price use overload use Pcont. max Icont.max Imax PN IN Phd Ihd kw A A kw A kw A Three phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V) 75 141 164 55 132 45 97 ACS800-07-0070-3 R6 4,890 90 166 202 75 155 55 115 ACS800-07-0100-3 R6 5,670 110 202 282 90 184 75 141 ACS800-07-0120-3 R6 6,690 110 206 326 110 202 90 163 ACS800-07-0140-3 R7 7,860 132 248 404 132 243 110 202 ACS800-07-0170-3 R7 9,390 160 289 432 160 284 132 240 1) ACS800-07-0210-3 R7 10,820 200 445 588 200 440 160 340 ACS800-07-0260-3 R8 12,850 250 521 588 250 516 200 370 ACS800-07-0320-3 R8 13,650 315 602 840 315 590 250 477 ACS800-07-0400-3 R8 16,640 355 693 1017 355 679 315 590 2) ACS800-07-0440-3 R8 18,660 400 720 1017 400 704 355 635 3) ACS800-07-0490-3 R8 20,810 See Table Notes, right Other voltage ranges available, 230 V, 500 V, 690 V. Price on application Other power ratings, price on application Free standing (cubicle), dimensions Frame Width Height*) IP Height*) Depth Depth top Weight (kg) with size with fuse 21/22/42 IP 54 entry/exit*) line fuse switch switch*) R6 430 4) 2130 2315 646 646 300 R7 830 2130 2315 646 646 400 R8 830 2130 2315 646 646 500 ACS800-07 can be supplied with an extensive range of standard cabinet options, contact your ABB representative for details TABLE NOTES Nominal Ratings: Icont.max : rated current available continuously without overloadability at 40 C. Imax : maximum output current. Available for 10 s at start, otherwise as long as allowed by drive temperature. Note: max. motor shaft power is 150% P hd. Typical Ratings: No-overload use Pcont.max : typical motor power in nooverload use. Light-overload use IN : continuous current allowing 110% IN for 1min/ 5 min at 40 C. PN : typical motor power in lightoverload use. Heavy-duty use Ihd : continuous current allowing 150% Ihd for 1min/ 5 min at 40 C. Phd : typical motor power in heavy-duty use. The current ratings are the same regardless of the supply voltage within one voltage range. The ratings apply at 40 C ambient temperature. At higher temperatures (up to 50 C) the derating is 1%/1 C. Notes: 1) 50% overload available if Tamb < 25 C. If Tamb = 40 C, max overload for 1 min is 37%. 2) 50% overload available if Tamb < 30 C. If Tamb = 40 C, max overload for 1 min is 40%. 3) 50% overload available if Tamb < 20 C. If Tamb = 40 C, max overload for 1 min is 30%. 4) 630mm for types ACS800-07-0120-3 and 0143-5 if equipped with du/dt filter.

ABB industrial drive In addition to the commonly used drives described in this brochure, ABB s product range extends to drives for more demanding uses. Prices on application. Regenerative drive modules Regenerative cabinet built drives (Price on application. See below) Series ACS800-14 110-900 kw (380-480 V) IP 00 kits Assembly kits for Rittal cabinets and generic cabinets Separate controllers for galvanic isolation Requires a separate +24 V DC supply at 3A Active supply unit can regenerate back to the mains, together with in-built LCL line filtering provides 2-4% harmonic distortion back to the mains (Price on application. See below) Series ACS800-17 Power range 75-1,120 kw, (380-690 V) IP 21 as standard, IP 22, IP 42, IP 54 and IP 54R optional Active supply unit can regenerate back to the mains, together with in-built LCL line filtering provides 2-4% harmonic distortion back to the mains Wheel out power modules for improved manual handling Pluggable power connections Water cooled single drives for high power applications (Price on application. See below) Series ACS600 Power range 700-4,300 kw, (690 V) IP 42 as standard, IP 54 as option Provides reliable operation under extremely adverse conditions Silent and safe operation without the need for air ventilation or air conditioning For further information, see ACS 600 catalogue code: 3AFE 64162021 EN ABB industrial drives, multidrives Series ACS800 multidrive 1.5 to 5600 kw, 380-690V Multidrives are built from industrial drive modules connected to a common DC bus. IP 21 as standard, IP 22, IP 42 and IP 54 as option Smaller power modules have high packing density, using a patented mounting arrangement Power modules on wheels for easy manual handling Plug-in power connectors for easy maintenance and redundancy Wide range of built-in options, including brake choppers, EMC filters, fuse switches, contactors, communication options etc 23

DC drives and MV drives Medium voltage AC drives Series ACS1000 From 315 kw to 80 MW Medium voltage drive built with reliable IGCT tecnology Retrofit-ready for existing motors and suitable for most MV applications Output sine filter for pure sinusoidal voltage and current output: standard motors, no motor derating, no voltage stress and no common mode voltages on the motor insulation Series ACS6000 Provides the most suitable product for demanding high-powered applications Active Rectifier Unit for four-quadrant operation and reduced harmonics and adjustable power factor Line Supply Unit for 2-quadrant operation and a constant power factor of 0.96 over the whole speed range Modular design for optimum configurations IGCT power semiconductor for highest reliability and low component count DTC control platform for exceptionally high torque and speed performance DC Drives ABB standard DC drives Range from 20 to 820 A DC Series DCS400 is a digital DC drive targeted at OEMs, like machine builders. An integrated IGBT-based field supply results in less motor stress, and better speed accuracy From 20 to 1,000 A at voltages up to 500 V AC (max. DC voltage 600V) ABB industrial DC drives Range from 25 to 5,150 A DC From 20 to 5,200 A at voltages up to 1,000 V Series DCS500 is ideal for users who need a powerful drive for demanding applications Series DCS600 DC drive shares the same hardware platform as the DCS500 Available in a single bridge up to 5,150 A Power quality filter (PQF) Actively eliminates harmonics in a controlled way Filters up to 50th harmonic in accordance with G5/4 requirements Each harmonic individually programmable Active filters only work when harmonics are present thereby reducing unwanted losses, resulting in greater overall efficiency Close loop for better measurement of harmonics - thereby more accurately eliminating the potentially damaging harmonic Auto-detection of CT polarity - ensures accurate current distortion readings on network, resulting in easy commissioning Stores record trail. Fault and event log any trip will have a record trail Available in IP 00 back plane or IP 21, IP 42 cabinets New intuitive user interface 24

Software tools Subhead 00-0000 ABB offers several software tools to ease and enhance the use of ABB drives. Especially when straightforward routines cannot be applied, these tools provide a user-friendly and easy-to-use approach for the selection, commissioning and use of AC drives. Integration and programming tools DriveOPC - for Windows TM based monitoring of ABB industrial drives This software package allows OLE for Process Control (OPC) communication between Windows applications and ABB drives. It is an ideal tool for integrating commercial PC monitoring software and ABB drives. DriveOPC enables remote connection over local area networks and can access all drives connected to the fast optical link of drives. The number of measuring points is not limited. DriveOPC gives the user read access to: Drive status: local, running, direction, fault, warning, homing reference Signals and parameters Fault logger parameters Fault logger contents Event logger contents General drive information Data logger settings, status and contents DriveOPC gives user write access to: Drive Control: local, start, stop, forward, reverse, coast stop, reset fault, home, teach-in, contactor on/off, reference Parameters Fault logger clear Data logger init, start, trig, clear DriveAP - for adaptive programming of ABB industrial drives. This PC tool is used to create, document, edit and download Adaptive Programs. Adaptive Programming can be done with the standard control panel or with DriveAP. DriveAP offers a clear and easy way to develop, test and document Adaptive Programs with a PC. It modifies function blocks and their connections and requires no special programming. Adaptive Programming results are easy to document as hard copies or store as PC files with DriveAP. Upload or download Adaptive Programs can be uploaded from connected drives and displayed graphically on a PC screen, for service or documentation purposes. Ready made Adaptive Programs can be downloaded to any of the connected drives. Start-up and maintenance tools DriveWindow - for ABB industrial drives. This Windows application is used for commissioning and maintaining ABB industrial drives equipped with fibre optic communication. It is an OPC based commissioning and maintenance tool and uses DDCS communication. It can also be used remotely via the intranet. Among its functions are control operations (start, stop, references), monitoring (signals), parameters (changing values), datalogger (controls, display), fault logger (display faults, controls), back-up and restore (complete software back-up). DriveWindow Light - for ABB standard drives. DriveWindow Light is a start-up and maintenance tool for the ABB standard drives range. The key functions include: Showing actual status of the connected drive Edit and show the drive parameters Save and load drive parameters Continued overleaf 25

Software tools Subhead 00-0000 Back up and restore drive parameters Offline configuration of drive parameters Graphical monitoring of drive signals Numerical monitoring of drive signals Run step response tests Engineering tools DriveSize - for dimensioning drives and motors. This PC program helps select an optimal motor, frequency converter and transformer, especially useful where a straightforward selection from a catalogue is not possible. DriveSize is used to compute network harmonics and to create documents about dimensioning. It contains current versions of ABB s motor and frequency converter catalogues. DriveSize software can be used in Win98, WinNT, Win2000 and WinXP operating systems. DriveChopper - for dimensioning a braking chopper and resistor. DriveChopper is a web tool for braking chopper and resistor dimensioning (visit www.abb.co.uk/energy). The program is created especially for system designers who need a braking unit for a particular drive application. Selection of a braking unit is based on user input, simulation and product database. The main input is the braking power as function of time. This tool creates tables and graphs where both input data and results are shown. DriveUpgrade - for finding an adequate drive to replace an old one. This on-line tool is ideal for finding a replacement to an existing ABB drive that may be coming to the end of its useful life. Simply input some basic information and the modern equivalent drive will be revealed. Energy Saving Tools - for comparison of energy consumption between different flow control methods in pumps and fans, ABB has developed calculation tools for estimating the energy savings that become available when applying electric speed control to certain flow machines. Using PumpSave and FanSave tools, AC drive control in pumps and fans can be compared against traditional flow control methods in terms of energy usage. The tools also provide financial figures for assessing the profitability of purchasing an ABB drive. PumpSave - for comparing AC drive control against throttling, on/off and hydraulic coupling control in pumps. Calculate how much energy and money you could be saving with ABB drives while also deriving other benefits such as soft starting and stopping, an improved power factor and connection into process automation. PumpSave also carries out a simple dimensioning and recommends an appropriate ABB drive type. FanSave - for comparing AC drive control against traditional flow control methods in fans. Calculate the savings you can achieve by replacing outlet damper, inlet vane or pitch control methods with electronic speed control from an ABB drive. FanSave also provides financial and environmental figures concerning the control method retrofit project and recommends a suitable ABB drive type. 6-step energy saving plan - ABB has developed six easy steps that help determine where AC drives can best be used and what could be the potential energy saving. The 6-steps look at the facts behind climate change and the need to save energy; the actual savings that can be made; the finance options available to pay for the AC drives; the different AC drive products available; application references; and an action plan which includes two on-line energy saving calculator tools. To discover more, visit: www.abb.co.uk/energy 26

AC motors Subhead 00-0000 Making you more competitive ABB has been manufacturing motors for over 100 years. Our products are designed to be reliable, efficient and cost effective, and we can supply motors for practically any application. A full range of services is available through our worldwide service organisation, with the latest e-business systems providing round-the-clock access, easy ordering and fast delivery. General Purpose Motors ABB s General Purpose Motors are readily available from central stock locations and its ABB Motor Service Partners (see page 2-3). While designed for standard and straightforward uses, the motors can be modified to meet most specifications. Built to the highest manufacturing standards, the General Purpose Motors use the best materials sourced from around the world. This brings a quality and reliability that can see motors operating for over 30 years. Competitively priced, the motors meet Eff2 energy efficient classification, with Eff1 as an option. Frame size 56 to 400, 0.09 to 630 kw Standard aluminium, steel and cast iron motors Open drip-proof motors Brake motors Single-phase motors Integral motors High output versions for reduced size and weight Wide voltage range Low noise levels Large base of stocked motors Extensive modification possibilities Suitable for DOL and variable speed drive applications Two years warranty Eff2 as a minimum Process Performance Motors ABB s Process Performance Motors are engineered to the toughest demands of today s process industries. These motors use the best materials and construction methods to achieve the highest quality and reliability and a possible operating life of over 30 years. The motor design is highly adaptable to allow rapid engineered solution according to the customer s specification. Frame size 71 to 400, 0.25 to 710 kw Cast iron and aluminium frames High output versions for reduced size and weight Wide voltage range Low noise levels Long bearing lifetime Long service intervals Excellent starting characteristics Flexible design - suitable for all DOL and variable speed drive applications Engineered to meet all specifications Excellent stock availability Extensive modification possibilities Three years warranty Eff1 - high efficiency class Availability Through our extended support and services provided by the ABB Motor Service Partners, ABB provides you with easy ordering and quick delivery. EDI-based ordering Over 300,000 motors stocked worldwide Most frequently used OEM motors stocked in depth 2 to 72 hours delivery for stocked motors Modifications within 24 hours 27

AC motors General purpose aluminium/steel motors TEFC low voltage motors, aluminium or steel frame, IP 55, IC 411, single-speed HO ECA High-output design (Possibly class F temp. rise, please see catalogue for details) ECA Compliant Output Frame Size Foot Flange kw Price Price 3000 r/min = 2 poles 0.09 M2VA 56 A 81.00 95.00 0.12 M2VA 56 B 83.00 96.00 0.18 M2VA 63 A 84.00 97.00 0.25 M2VA 63 B 85.00 98.00 0.37 M2VA 71 A 93.00 106.00 0.37 M2VA 63 BB 91.00 104.00 HO 0.55 M2VA 71 B 100.00 113.00 0.68 M2VA 71 BB 123.00 140.00 HO 0.75 M2VA 80 A 133.00 151.00 0.75 M2VA 71 BC 126.00 143.00 HO 1.1 M2VA 80 B 140.00 161.00 1.1 M3VA 80 C 175.00 201.00 ECA 1.5 M2AA 90 S 152.00 171.00 1.5 M3AA 90 L 210.00 236.00 ECA 1.5 M2VA 80 C 153.00 173.00 HO 2.2 M2AA 90 L 188.00 207.00 2.2 M3AA 90 LB 260.00 286.00 ECA 2.7 M3AA 90 LB 241.00 268.00 HO 3 M2AA 100 L 228.00 256.00 3 M3AA 100 LB 317.00 352.00 ECA 4 M2AA 112 M 300.00 321.00 4 M3AA 112 M 367.00 403.00 ECA 4 M3AA 100 LB 307.00 337.00 HO 5.5 M2AA 132 SA 367.00 396.00 5.5 M3AA 132 SA 482.00 528.00 ECA 5.5 M3AA 112 MB 379.00 410.00 HO 7.5 M2AA 132 SB 414.00 440.00 7.5 M3AA 132 SB 612.00 660.00 ECA 9.2 M3AA 132 SBB 652.00 683.00 HO 11 M2AA 160 MA 617.00 683.00 11 M3AA 160 MA 758.00 839.00 ECA 11 M3AA 132 SC 682.00 751.00 HO 15 M2AA 160 M 713.00 780.00 15 M3AA 160 M 876.00 957.00 ECA 18.5 M2AA 160 L 885.00 954.00 18.5 M3AA 160 L 1087.00 1171.00 ECA 22 M2AA 180 M 1084.00 1150.00 22 M3AA 180 M 1331.00 1412.00 ECA 22 M3AA 160 LB 1274.00 1354.00 HO 30 M2AA 200 LA 1401.00 1486.00 30 M3AA 200 MLA 1721.00 1825.00 ECA 30 M3AA 180 LB 1618.00 1709.00 HO 37 M2AA 200 L 1638.00 1635.00 37 M3AA 200 MLB 1893.00 2008.00 ECA 45 M2AA 225 M 2634.00 2745.00 45 M3AA 225 SMB 3234.00 3372.00 ECA 45 M3AA 200 MLC 2890.00 3005.00 HO 55 M2AA 250 M 3082.00 3203.00 55 M3AA 250 SMA 3784.00 3934.00 ECA 55 M3AA 200 MLD 3463.00 3600.00 HO 55 M3AA 225 SMC 3647.00 3784.00 HO 75 M2CA 280 SA 4049.00 4298.00 ECA 75 M3AA 280 SMA 4804.00 4930.00 ECA 75 M3AA 250 SMB 4701.00 4827.00 HO 80 M3AA 225 SMD 4518.00 4645.00 HO 90 M2CA 280 SMA 4863.00 5113.00 ECA 90 M3AA 280 SMB 5630.00 5779.00 ECA Output Frame Size Foot Flange kw Price Price 1500 r/min = 4 poles 0.06 M2VA 56 A 77.00 90.00 0.09 M2VA 56 B 79.00 92.00 0.12 M2VA 63 B 80.00 93.00 0.18 M2VA 63 B 82.00 95.00 0.25 M2VA 71 A 88.00 101.00 0.25 M2VA 63 BB 86.00 99.00 HO 0.37 M2VA 71 B 94.00 106.00 0.45 M2VA 71 BB 94.00 121.00 HO 0.55 M2VA 71 C 117.00 135.00 HO 0.55 M2VA 80 A 126.00 145.00 0.75 M2VA 80 B 129.00 148.00 0.95 M2VA 80 C 126.00 154.00 HO 1.1 M2AA 90 S 144.00 162.00 1.1 M3AA 90L 215.00 238.00 ECA 1.5 M2AA 90 L 171.00 192.00 1.5 M3AA 100 LA 260.00 282.00 ECA 1.85 M3AA 90 L 215.00 241.00 HO 2.2 M2AA 100 LA 202.00 226.00 2.2 M3AA 100 LC 295.00 330.00 ECA 2.2 M3AA 90 LB 215.00 241.00 HO 3 M2AA 100 LB 221.00 247.00 3 M3AA 112MA 388.00 423.00 ECA 4 M2AA 112 M 288.00 316.00 4 M3AA 112MA 388.00 423.00 ECA 4 M3AA 100 LC 287.00 317.00 HO 5.5 M2AA 132 S 376.00 407.00 5.5 M3AA 132 S 496.00 542.00 ECA 5.5 M3AA 112 MB 380.00 412.00 HO 7.5 M2AA 132 M 448.00 476.00 7.5 M3AA 132 M 640.00 686.00 ECA 9.2 M3AA 132 MBA 668.00 699.00 HO 11 M2AA 160 M 707.00 784.00 11 M3AA 160 M 763.00 844.00 ECA 11 M3AA 132 MB 697.00 767.00 HO 15 M2AA 160 L 848.00 922.00 15 M3AA 160 L 914.00 994.00 ECA 18.5 M2AA 180 M 935.00 1000.00 18.5 M3AA 180 M 1147.00 1228.00 ECA 18.5 M3AA 160 LB 1090.00 1171.00 HO 22 M2AA 180 L 1244.00 1308.00 22 M3AA 180 L 1354.00 1423.00 ECA 30 M2AA 200 L 1515.00 1578.00 30 M3AA 200 MLB 1687.00 1767.00 ECA 30 M3AA 180 LB 1606.00 1687.00 HO 37 M2AA 225 S 1849.00 1980.00 37 M3AA 225 SMA 2271.00 2431.00 ECA 37 M3AA 200 MLB 2020.00 2100.00 HO 45 M2AA 225 M 2251.00 2382.00 45 M3AA 225 SMB 2764.00 2925.00 ECA 48 M3AA 200 MLC 2913.00 3039.00 HO 55 M2AA 250 M 2690.00 2801.00 55 M3AA 250 SMA 3303.00 3440.00 ECA 55 M3AA 225 SMC 3165.00 3303.00 HO 75 M3AA 280 SMA 4357.00 4507.00 ECA 75 M2CA 280 SA 3919.00 4168.00 ECA 73 M3AA 225 SMD 4105.00 4232.00 HO 75 M3AA 250 SMB 4357.00 4507.00 HO 28

AC motors General purpose aluminium/steel motors (continued) TEFC low voltage motors, aluminium or steel frame, IP 55, IC 411, single-speed Output Frame Size Foot Flange kw Price Price 3000 r/min = 2 poles 95 M3AA 250 SMC 5527.00 5676.00 HO 110 M2CA 315 SA 5938.00 6350.00 ECA 110 M2CA 280 MB 5569.00 5817.00 HO 132 M2CA 315 SMA 7174.00 7587.00 ECA 132 M2CA 280 MC 6740.00 6989.00 HO ECA 160 M2CA 315 MB 8899.00 9312.00 ECA 160 M2CA 280 MD 8369.00 8618.00 HO 200 M2CA 315 LA 11179.00 11612.00 ECA 200 M2CA 355 SA 11830.00 12589.00 ECA 250 M2CA 355 MA 14108.00 14868.00 ECA 250 M2CA 315 LB 13240.00 13675.00 HO 280 M2CA 355 MB 16170.00 16930.00 315 M2CA 355 LA 17690.00 18449.00 ECA 315 M2CA 315 LC 16605.00 17039.00 HO 355 M2CA 355 LB 19427.00 20186.00 400 M2CA 400 MLA 23441.00 24418.00 ECA 450 M2CA 400 MLB 26697.00 27673.00 500 M2CA 400 LKA 28542.00 29518.00 560 M2CA 400 LKB 32014.00 32990.00 Output Frame Size Foot Flange kw Price Price 1500 r/min = 4 poles 90 M3AA 280 SMB 5113.00 5251.00 ECA 90 M2CA 280 SMA 4581.00 4830.00 ECA 95 M3AA 250 SMC 6433.00 6663.00 HO 110 M2CA 315 SA 5687.00 6100.00 ECA 110 M2CA 280 MB 5297.00 5547.00 HO ECA 132 M2CA 315 SMA 6850.00 7261.00 ECA 132 M2CA 280 MC 6436.00 6686.00 HO ECA 160 M2CA 315 MB 8291.00 8705.00 ECA 160 M2CA 280 MD 7794.00 8042.00 HO ECA 200 M2CA 315 LA 10528.00 10961.00 ECA 200 M2CA 355 SA 10961.00 11721.00 ECA 250 M2CA 355 MA 13023.00 13783.00 ECA 250 M2CA 315 LB 12264.00 12698.00 HO ECA 315 M2CA 355 LA 16605.00 17363.00 ECA 315 M2CA 315 LC 15628.00 16061.00 HO ECA 355 M2CA 355 LB 18776.00 19534.00 ECA 400 M2CA 355 LKD 20837.00 21597.00 ECA 450 M2CA 400 MLA 24635.00 25611.00 500 M2CA 400 MLB 27457.00 28432.00 560 M2CA 400 LKA 29734.00 30712.00 630 M2CA 400 LKB 33100.00 34075.00 General purpose cast iron motors TEFC low voltage motors, cast iron frame, IP 55, IC 411, single-speed HO ECA High-output design (Possibly class F temp. rise, please see catalogue for details) ECA Compliant Output Frame Size Foot Flange kw Price Price 3000 r/min = 2 poles 0.37 M2QA 71 M2A 91.00 102.00 0.55 M2QA 71 M2B 98.00 107.00 0.75 M2QA 80 M2A 124.00 139.00 1.1 M2QA 80 M2B 131.00 145.00 1.5 M2QA 90 S2A 137.00 152.00 2.2 M2QA 90 L2A 171.00 185.00 3 M2QA 100 L2A 200.00 224.00 4 M2QA 112 M2A 260.00 293.00 5.5 M2QA 132 S2A 316.00 340.00 5.5 M2QA 112 L2A 300.00 315.00 HO 7.5 M2QA 132 S2B 380.00 414.00 9.2 M2QA 132 M2A 460.00 480.00 HO 11 M2QA 160 M2A 594.00 654.00 11 M2QA 132 M2B 550.00 580.00 HO 15 M2QA 160 M2B 705.00 770.00 18.5 M2QA 160 L2A 869.00 918.00 22 M2QA 180 M2A 1009.00 1049.00 22 M2QA 160 L2B 950.00 980.00 HO 30 M2QA 200 L2A 1360.00 1420.00 30 M2QA 180 L2A 1230.00 1270.00 HO 37 M2QA 200 L2B 1764.00 1833.00 45 M2QA 225 M2A 2532.00 2621.00 45 M2QA 200 L2C 2430.00 2430.00 HO 55 M2QA 250 M2A 3031.00 3129.00 55 M2QA 225 M2B 2850.00 2940.00 HO 75 M2BAT 280 SMA 5110.00 5405.00 75 M2QA 250 M2B 3700.00 3790.00 HO 90 M2BAT 280 SMB 5820.00 5995.00 110 M2BAT 315 SMA 7666.00 7916.00 110 M2BAT 280 SMC 7534.00 7785.00 HO 132 M2BAT 315 SMB 8473.00 8735.00 160 M2BAT 315 SMC 9686.00 9947.00 200 M2BAT 315 MLA 14849.00 15067.00 ECA 250 M2BAT 355 S 19107.00 19762.00 Output Frame Size Foot Flange kw Price Price 1500 r/min = 4 poles 0.25 M2QA 71 M4A 86.00 96.00 0.37 M2QA 71 M4B 91.00 102.00 0.55 M2QA 80 M4A 117.00 132.00 0.75 M2QA 80 M4B 120.00 134.00 1.1 M2QA 90 S4A 131.00 145.00 1.5 M2QA 90 L4A 158.00 171.00 2.2 M2QA 100 L4A 179.00 200.00 3 M2QA 100 L4B 204.00 227.00 4 M2QA 112 M4A 253.00 273.00 5.5 M2QA 132 S4A 323.00 346.00 5.5 M2QA 112 L4A 303.00 326.00 HO 7.5 M2QA 132 M4A 398.00 422.00 9.2 M2QA 132 M4B 440.00 464.00 HO 11 M2QA 160 M4A 589.00 649.00 11 M2QA 132 M4C 555.00 610.00 HO 15 M2QA 160 L4A 734.00 807.00 18.5 M2QA 180 M4A 878.00 935.00 22 M2QA 180 L4A 1049.00 1090.00 22 M2QA 160 L4B 810.00 880.00 HO 30 M2QA 200 L4A 1377.00 1451.00 30 M2QA 180 L4B 1250.00 1320.00 HO 37 M2QA 225 S4A 1851.00 1950.00 45 M2QA 225 M4A 2172.00 2278.00 45 M2QA 200 L4B 1720.00 1820.00 HO 55 M2QA 250 M4A 2621.00 2744.00 55 M2QA 225 M4B 2540.00 2640.00 HO 75 M2BAT 280 SMA 4357.00 4619.00 75 M2QA 250 M4B 3600.00 3700.00 HO 90 M2BAT 280 SMB 5231.00 5504.00 110 M2BAT 280 SMC 5569.00 5842.00 HO 110 M2BAT 315 SMA 6453.00 6738.00 132 M2BAT 315 SMB 7621.00 7884.00 160 M2BAT 315 SMC 8910.00 9172.00 200 M2BAT 315 MLA 12665.00 12993.00 250 M2BAT 355 S 14958.00 15395.00 29

AC motors Process performance cast iron motors TEFC low voltage motors, cast iron frame, IP 55, IC 411, single-speed HO High-output design ECA ECA Compliant 2) Eff2 Efficiency Output Frame Size Foot Flange kw Price Price 3000 r/min = 2 poles 0.37 M2BA 71 M2 A 125.00 140.00 0.55 M2BA 71 M2 B 134.00 146.00 0.75 M2BA 80 M2 A 170.00 190.00 1.1 M2BA 80 M2 B 179.00 198.00 1.5 M2BA 90 S2 A 188.00 209.00 2) 2.2 M2BA 90 L2 A 234.00 253.00 2) 3 M2BA 100 L2 A 277.00 307.00 2) 4 M2BA 112 M2 A 357.00 400.00 2) 5.5 M2BA 132 S2 A 433.00 467.00 2) 7.5 M2BA 132 S2 B 521.00 569.00 2) 11 M3BP 160 MA 814.00 898.00 ECA 15 M3BP 160 M 969.00 1057.00 ECA 18.5 M3BP 160 L 1182.00 1261.00 ECA 22 M3BP 180 M 1441.00 1508.00 ECA 22 M3BP 160 LB 1385.00 1441.00 HO ECA 30 M3BP 200 MLA 1868.00 1946.00 ECA 30 M3BP 180 LB 1744.00 1846.00 HO ECA 37 M3BP 200 MLB 2138.00 2250.00 ECA 45 M3BP 225 SMB 3476.00 3599.00 ECA 45 M3BP 200 MLC 3128.00 3241.00 HO ECA 55 M3BP 250 SMA 4162.00 4298.00 ECA 55 M3BP 225 SMC 3982.00 4140.00 HO ECA 75 M3BP 280 SMA 5367.00 5676.00 ECA 75 M3BP 250 SMB 5023.00 5568.00 HO ECA 90 M3BP 280 SMB 6111.00 6295.00 ECA 110 M3BP 315 SMA 8049.00 8313.00 ECA 110 M3BP 280 SMC 7749.00 8073.00 HO ECA 132 M3BP 315 SMB 8897.00 9172.00 ECA 160 M3BP 315 SMC 10171.00 10446.00 ECA 200 M3BP 315 MLA 14160.00 15537.00 ECA 250 M3BP 355 SMA 17918.00 18795.00 ECA 250 M3BP 315 LKA 16791.00 17292.00 HO ECA 315 M3BP 355 SMB 22553.00 23431.00 ECA 315 M3BP 315 LKC 21051.00 21552.00 HO ECA 355 M3BP 355 SMC 25437.00 26313.00 ECA 400 M3BP 355 MLA 28443.00 29320.00 ECA 450 M3BP 355 MLB 32453.00 33330.00 500 M3BP 355 LKA 34582.00 35459.00 560 M3BP 355 LKB 38842.00 39720.00 560 M3BP 400 LA 40722.00 41849.00 560 M3BP 400 LKA 41835.00 42962.00 630 M3BP 400 LB 45232.00 46360.00 630 M3BP 400 LKB 46345.00 47473.00 710 M3BP 400 LC 50996.00 52122.00 710 M3BP 400 LKC 52109.00 53235.00 Output Frame Size Foot Flange kw Price Price 1500 r/min = 4 poles 0.25 M2BA 71 M4 A 119.00 132.00 0.37 M2BA 71 M4 B 125.00 140.00 0.55 M2BA 80 M4 A 160.00 180.00 0.75 M2BA 80 M4 B 164.00 184.00 1.1 M2BA 90 S4 A 179.00 198.00 1.5 M2BA 90 L4 A 216.00 235.00 2.2 M2BA 100 L4 A 246.00 277.00 3 M2BA 100 L4 B 280.00 313.00 4 M2BA 112 M4 A 348.00 375.00 5.5 M2BA 132 S4 A 443.00 475.00 7.5 M2BA 132 M4 A 546.00 578.00 11 M3BP 160 M 808.00 890.00 ECA 15 M3BP 160 L 1007.00 1108.00 ECA 18.5 M3BP 180 M 1206.00 1284.00 ECA 18.5 M3BP 160 LB 1149.00 1238.00 HO 22 M3BP 180 L 1441.00 1497.00 ECA 30 M3BP 200 MLB 1891.00 1993.00 ECA 30 M3BP 180 LB 1688.00 1790.00 HO 37 M3BP 225 SMA 2543.00 2678.00 ECA 37 M3BP 200 MLB 2341.00 2487.00 HO 45 M3BP 225 SMB 2981.00 3128.00 ECA 55 M3BP 250 SMA 3599.00 3769.00 ECA 55 M3BP 225 SMC 3499.00 3667.00 HO 75 M3BP 280 SMA 4575.00 4850.00 ECA 75 M3BP 250 SMB 4331.00 4612.00 HO ECA 90 M3BP 280 SMB 5493.00 5780.00 ECA 110 M3BP 315 SMA 6777.00 7075.00 ECA 110 M3BP 280 SMC 6576.00 6876.00 HO ECA 132 M3BP 315 SMB 8004.00 8279.00 ECA 160 M3BP 315 SMC 9356.00 9631.00 ECA 200 M3BP 315 MLA 13299.00 13643.00 ECA 250 M3BP 355 SMA 15706.00 16165.00 ECA 250 M3BP 315 LKA 14560.00 15019.00 HO ECA 280 M3BP 315 LKB 18000.00 18457.00 HO ECA 315 M3BP 355 SMB 20865.00 21553.00 ECA 315 M3BP 315 LKC 19718.00 20177.00 HO ECA 355 M3BP 355 SMC 22241.00 22928.00 ECA 400 M3BP 355 MLA 25221.00 25680.00 ECA 450 M3BP 355 MLB 28546.00 28776.00 500 M3BP 355 LKA 31641.00 31871.00 560 M3BP 355 LKB 34508.00 34737.00 560 M3BP 400 LA 36227.00 36685.00 560 M3BP 400LKA 36227.00 36685.00 630 M3BP 400 LB 40240.00 40697.00 630 M3BP 400 LKB 42225.00 43352.00 710 M3BP 400 LC 47613.00 48740.00 710 M3BP 400 LKC 48726.00 49853.00 30

AC motors Flameproof motors, 80-400 - EEx d/e* IIB T4 TEFC low voltage motors, IP 55, IC 411, single-speed ATEX Certified HO ECA High-output design ECA Compliant Output Frame Size Foot Flange kw Price Price 3000 r/min = 2 poles 0.37 MJA/KA 71A 390.00 450.00 0.55 MJA/KA 71B 416.00 476.00 0.75 M2JA/KA 80 LS 540.00 575.00 1.1 M2JA/KA 80 L 566.00 621.00 1.5 M2JA/KA 90 S 627.00 680.00 2.2 M2JA/KA 90 L 742.00 791.00 3 M2JA/KA 100 L 788.00 840.00 4 M2JA/KA 112 M 978.00 1043.00 5.5 M2JA/KA 132 SA 1137.00 1197.00 7.5 M2JA/KA 132 SB 1449.00 1497.00 11 M3JP/KP 160 MLA 1676.00 1796.00 ECA 15 M3JP/KP 160 MLB 1988.00 2071.00 ECA 18.5 M3JP/KP 160 MLC 2262.00 2323.00 ECA 22 M3JP/KP 180 MLA 2801.00 2897.00 ECA 22 M3JP/KP 160 MLD 2633.00 2718.00 HO 30 M3JP/KP 200 MLA 3567.00 3710.00 ECA 30 M3JP/KP 180 MLB 3339.00 3436.00 HO 37 M3JP/KP 200 MLC 4739.00 4955.00 ECA 37 M3JP/KP 180 MLC 4675.00 - HO 45 M3JP/KP 225 SMB 6414.00 6653.00 ECA 45 M3JP/KP 200 MLE 6042.00 - HO 55 M3JP/KP 250 SMA 8436.00 8748.00 ECA 55 M3JP/KP 225 SMC 7923.00 8222.00 HO 67 M3JP/KP 225 SMD 8962.00 - HO 75 M3JP/KP 280 SMA 11439.00 11822.00 ECA 75 M3JP/KP 250 SMB 10685.00 11056.00 HO ECA 90 M3JP/KP 280 SMB 14958.00 15437.00 ECA 90 M3JP/KP 250 SMC 11954.00 - HO 110 M3JP/KP 315 SMA 18068.00 18427.00 ECA 110 M3JP/KP 280 SMC 16991.00 17351.00 HO ECA 132 M3JP/KP 315 SMB 21418.00 21776.00 ECA 160 M3JP/KP 315 SMC 24290.00 24648.00 ECA 200 M3JP/KP 315 MLA 30511.00 30870.00 ECA 250 M3JP/KP 355 SMA 33235.00 34201.00 ECA 315 M3JP/KP 355 SMB 40407.00 41372.00 ECA 355 M3JP/KP 355 SMC 43440.00 44405.00 ECA 400 M3JP/KP 355 MLA 48129.00 49094.00 ECA 400 M2JA/KA 400 M 61261.00 - ECA 450 M3JP/KP 355 MLB 53783.00 54749.00 450 M2JA/KA 400 MA 69038.00-500 M3JP/KP 355 LKA 62609.00 63574.00 500 M2JA/KA 400 LKA 76814.00 78968.00 560 M2JA/KA 400 LKB 86028.00 88540.00 Output Frame Size Foot Flange kw Price Price 1500 r/min = 4 poles 0.25 MJA/KA 71A 386.00 446.00 0.37 MJA/KA 71B 412.00 472.00 0.55 M2JA/KA 80 LS 494.00 540.00 0.75 M2JA/KA 80 L 516.00 566.00 1.1 M2JA/KA 90 S 550.00 599.00 1.5 M2JA/KA 90 L 604.00 657.00 2.2 M2JA/KA 100 LA 660.00 713.00 3 M2JA/KA 100 LB 860.00 911.00 4 M2JA/KA 112 M 918.00 986.00 5.5 M2JA/KA 132 S 1215.00 1284.00 7.5 M2JA/KA 132 M 1353.00 1425.00 11 M3JP/KP 160 MLC 1688.00 1772.00 ECA 15 M3JP/KP 160 MLE 2095.00 2167.00 ECA 18.5 M3JP/KP 180 MLA 2622.00 2729.00 ECA 18.5 M3JP/KP 160 MLF 2466.00 2537.00 HO ECA 22 M3JP/KP 180 MLB 2909.00 3016.00 ECA 30 M3JP/KP 200 MLB 3639.00 3771.00 ECA 30 M3JP/KP 180 MLC 3411.00 3506.00 HO 37 M3JP/KP 225 SMB 4477.00 4644.00 ECA 37 M3JP/KP 200 MLC 4153.00 4297.00 HO 45 M3JP/KP 225 SMC 5290.00 5469.00 ECA 55 M3JP/KP 250 SMA 6486.00 6797.00 ECA 55 M3JP/KP 225 SMD 6127.00 6426.00 HO 75 M3JP/KP 280 SMA 8509.00 8902.00 ECA 75 M3JP/KP 250 SMB 8006.00 8376.00 HO ECA 90 M3JP/KP 280 SMB 11727.00 12086.00 ECA 110 M3JP/KP 315 SMA 13402.00 13880.00 ECA 110 M3JP/KP 280 SMC 13282.00 13641.00 HO ECA 132 M3JP/KP 315 SMB 16393.00 16751.00 ECA 160 M3JP/KP 315 SMC 18068.00 18427.00 ECA 200 M3JP/KP 315 MLA 23811.00 24169.00 ECA 250 M3JP/KP 355 SMA 29794.00 30631.00 ECA 315 M3JP/KP 355 SMB 37571.00 38408.00 ECA 355 M3JP/KP 355 SMC 42356.00 43194.00 ECA 400 M3JP/KP 355 MLA 47621.00 48698.00 ECA 400 M2JA/KA 400 M 47621.00 - ECA 450 M3JP/KP 355 MLB 52955.00 53920.00 450 M2JA/KA 400 MA 53724.00-500 M2JA/KA 400 MB 59706.00-500 M3JP/KP 355 LKA 58609.00 59574.00 560 M3JP/KP 355 LKB 66746.00 67986.00 630 M2JA/KA 400 LKB 75140.00 77892.00 * JA/JP EExd * KA/KP EExde 31

AC motors Non-sparking motors, 80-400, EExnA T3 cast iron frame TEFC low voltage motors, IP 55, IC 411, single-speed ATEX Certified HO ECA High-output design ECA Compliant Output Frame Size Foot Flange kw Price Price 3000 r/min = 2 poles 0.37 M2BA 71 M2 A 221.00 240.00 0.55 M2BA 71 M2 B 233.00 253.00 0.75 M2BA 80 M2 A 249.00 270.00 1.1 M2BA 80 M2 B 267.00 290.00 1.5 M2BA 90 S2 A 304.00 331.00 2.2 M2BA 90 L2 A 358.00 386.00 3 M2BA 100 L2 A 409.00 443.00 4 M2BA 112 M2 A 488.00 528.00 5.5 M2BA 132 S2 A 599.00 652.00 7.5 M2BA 132 S2 B 726.00 780.00 11 M3GP 160 MLA 1028.00 1125.00 15 M3GP 160 MLB 1208.00 1335.00 ECA 18.5 M3GP 160 MLC 1465.00 1558.00 ECA 22 M3GP 180 MLA 1768.00 1859.00 ECA 22 M3GP 160 MLD 1688.00 1754.00 HO ECA 30 M3GP 200 MLA 2263.00 2355.00 ECA 30 M3GP 180 MLB 2133.00 2238.00 HO ECA 37 M3GP 200 MLC 3728.00 3860.00 ECA 37 M3GP 180 MLC 3451.00 3451.00 HO ECA 45 M3GP 225 SMB 4133.00 4278.00 ECA 45 M3GP 200 MLE 3679.00 3846.00 HO ECA 55 M3GP 250 SMA 4931.00 5089.00 ECA 55 M3GP 225 SMC 4722.00 4906.00 HO ECA 67 M3GP 225 SMD 5441.00 5638.00 HO ECA 75 M3GP 280 SMA 6226.00 6566.00 ECA 75 M3GP 250 SMB 6226.00 6566.00 HO ECA 90 M3GP 280 SMB 7417.00 7627.00 ECA 90 M3GP 250 SMC 6914.00 7142.00 HO ECA 110 M3GP 315 SMA 9718.00 10020.00 ECA 110 M3GP 280 SMC 9626.00 9928.00 HO ECA 132 M3GP 315 SMB 10685.00 10999.00 ECA 160 M3GP 315 SMC 12150.00 12451.00 ECA 200 M3GP 315 MLA 18309.00 18572.00 ECA 250 M3GP 355 SMA 19997.00 20962.00 ECA 315 M3GP 355 SMB 25099.00 26066.00 ECA 355 M3GP 355 SMC 28271.00 29237.00 ECA 400 M3GP 355 MLA 31581.00 32546.00 ECA 450 M3GP 355 MLB 35993.00 36959.00 500 M3GP 355 LKA 38338.00 39303.00 560 M3GP 355 LKB 43026.00 43992.00 560 M3GP 400 LA 45000.00 45900.00 560 M3GP 400 LKA 45000.00 45900.00 630 M3GP 400 LB 47500.00 48400.00 630 M3GP 400 LKB 47500.00 48400.00 710 M3GP 400 LC 53000.00 53900.00 710 M3GP 400 LKC 53000.00 53900.00 Output Frame Size Foot Flange kw Price Price 1500 r/min = 4 poles 0.25 M2BA 71 M4 A 217.00 238.00 0.37 M2BA 71 M4 B 228.00 249.00 0.55 M2BA 80 M4 A 243.00 264.00 0.75 M2BA 80 M4 B 254.00 277.00 1.1 M2BA 90 S4 A 289.00 316.00 1.5 M2BA 90 L4 A 319.00 345.00 2.2 M2BA 100 L4 A 366.00 399.00 3 M2BA 100 L4 B 415.00 450.00 4 M2BA 112 M4 A 508.00 548.00 5.5 M2BA 132 S4 A 613.00 667.00 7.5 M2BA 132 M4 A 753.00 807.00 11 M3GP 160 MLC 1023.00 1118.00 ECA 15 M3GP 160 MLE 1275.00 1370.00 ECA 18.5 M3GP 180 MLA 1493.00 1598.00 ECA 18.5 M3GP 160 MLF 1426.00 1518.00 HO ECA 22 M3GP 180 MLB 1768.00 1859.00 ECA 22 M3GP 160 MLG 1682.00 1682.00 HO ECA 30 M3GP 200 MLB 2291.00 2421.00 ECA 30 M3GP 180 MLC 2054.00 2173.00 HO ECA 37 M3GP 225 SMB 3049.00 3205.00 ECA 37 M3GP 200 MLC 2813.00 2982.00 HO ECA 45 M3GP 225 SMC 3558.00 3728.00 ECA 55 M3GP 250 SMA 4278.00 4475.00 ECA 55 M3GP 225 SMD 4161.00 4356.00 HO ECA 60 M3GP 225 SME 4696.00 4893.00 HO ECA 75 M3GP 280 SMA 5364.00 5664.00 ECA 75 M3GP 250 SMB 5120.00 5454.00 HO ECA 90 M3GP 280 SMB 6710.00 7038.00 ECA 90 M3GP 250 SMC 6567.00 6845.00 HO ECA 110 M3GP 315 SMA 8266.00 8606.00 ECA 110 M3GP 280 SMC 8161.00 8515.00 HO ECA 132 M3GP 315 SMB 9667.00 9980.00 ECA 160 M3GP 315 SMC 11209.00 11666.00 ECA 200 M3GP 315 MLA 15694.00 16088.00 ECA 250 M3GP 355 SMA 18618.00 19583.00 ECA 315 M3GP 355 SMB 23582.00 24548.00 ECA 355 M3GP 355 SMC 26616.00 27581.00 ECA 400 M3GP 355 MLA 29512.00 30477.00 ECA 450 M3GP 355 MLB 36959.00 37924.00 500 M3GP 355 LKA 37500.00 38900.00 560 M3GP 400 LA 42000.00 43500.00 560 M3GP 400 LKA 42000.00 43500.00 630 M3GP 400 LB 45000.00 47000.00 630 M3GP 400 LKB 45000.00 47000.00 710 M3GP 400 LC 49500.00 51500.00 710 M3GP 400 LKC 49500.00 51500.00 32

AC motors Optional extras for all motor types Option Description Modification Motor 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400 Code types Auxilliary Terminal Box 418 N N N N N N N 247 247 247 247 247 218 218 218 218 for accessories 418 N 242 242 242 242 242 242 242 242 242 242 242 242 242 242 242 418 N N N N N N N N N 329 329 329 329 329 329 329 Balancing to Grade R 52 51 51 51 51 51 79 79 97 147 176 282 344 321 349 417 487 52 N 59 59 59 59 79 79 97 147 176 282 344 321 349 417 487 52 N N 59 59 59 79 79 97 147 176 282 344 321 349 417 487 British Standard Sliderails 51 51 51 51 74 74 74 105 105 195 195 328 328 624 624 624 N 51 51 51 74 74 74 105 105 195 195 328 328 624 624 624 N N 51 51 74 74 74 105 105 195 195 328 328 624 624 624 Degree of Protection IP56 403 N N N N N 207 207 269 269 269 269 269 244 268 283 328 403 N 163 163 163 163 203 203 238 238 238 238 238 244 268 283 328 403 N N 163 163 163 203 203 238 238 238 238 238 244 268 283 328 Degree of Protection IP65 158 163 163 163 163 163 207 207 269 269 269 269 269 244 268 283 328 158 N 163 163 163 163 207 207 269 269 269 269 269 244 268 283 328 158 N N 163 163 163 207 207 269 269 269 269 269 R R R R EExd motor for Gas Group IIC 461 N N 59 70 93 117 152 244 427 609 792 974 1461 2435 4870 7305 External Earth Bolt 67 45 45 45 45 45 45 45 81 81 81 81 81 81 81 81 81 67 N 68 68 68 68 68 68 81 81 81 81 81 81 81 81 81 67 N N S S S S S S S S S S S S S S Foot and Face Mounting 8 85 85 85 85 85 111 111 N N N N N N N N N 8 N 61 61 61 61 88 88 N N N N N N N N N 8 N N 53 53 53 76 98 N N N N N N N N N Foot and Flange Mounting 9 85 85 85 85 85 111 111 217 217 290 290 317 280 487 853 1096 9 N 61 61 61 61 88 88 192 192 256 256 280 280 487 853 1096 9 N N 53 53 53 76 98 192 192 256 256 281 280 487 853 1096 Heating Element specify 450/451 155 155 155 155 155 173 173 214 236 264 301 362 332 332 369 369 120V or 240V 450/451 N 155 155 155 155 173 173 214 236 264 301 362 332 332 369 369 450/451 N N 155 155 155 173 173 214 236 264 301 362 332 332 369 369 Insulated bearing at NDE. 701 R R R R R R R R R R R R 792 792 1096 1096 Frame 280 and above on 701 R R R R R R R R R R R R 792 792 1096 1096 variable speed drives. 701 R R R R R R R R R R R R 792 792 1096 1096 Metal Fan 68 99 99 99 99 99 138 138 204 204 220 231 231 385 411 439 439 68 N 95 95 95 95 136 136 181 181 194 204 204 385 411 439 439 68 N N 93 111 111 117 117 181 181 194 204 204 385 411 439 439 Metal Fan Cover 53 66 66 66 66 66 89 89 S S S S S S S S S 53 N S S S S S S S S S S S S S S S 53 N N S S S S S S S S S S S S S S Paint colour to standard RAL 114 141 141 141 141 141 138 138 173 173 173 173 173 173 173 173 173 specify RAL no. 114 N 141 141 141 141 140 140 173 173 173 173 173 173 173 173 173 114 N N 141 141 141 140 140 173 173 173 173 173 173 173 173 173 PT100 Resistance element 445 N N N N N 424 424 424 424 629 629 629 609 609 609 609 one per phase 445 N R R R R 424 424 424 424 629 629 629 609 609 609 609 445 N N 424 424 424 424 424 424 424 629 629 629 609 609 609 609 PTC Thermistors 3 in series, 435 86 86 86 86 86 111 111 166 166 166 166 166 147 147 147 147 130 C others on request 435 N 86 86 86 86 111 111 166 166 166 166 166 147 147 147 147 435 N N 86 86 86 111 111 166 166 166 166 166 147 147 147 147 Rain Canopy for VI Mounting 5 71 71 71 71 71 83 83 97 111 118 158 196 243 288 430 430 (mandatory on Ex motors) 5 N 71 71 71 71 83 83 97 111 118 158 196 243 288 430 430 5 N N 71 71 71 83 83 97 111 118 158 196 243 288 430 430 Roller Bearing at DE 37 N N N N N N N 173 200 228 262 290 256 256 375 R (not available on IIC motors) 37 N N N N N N N 173 200 228 262 290 256 256 375 375 37 N N N N N N N 173 200 228 262 290 256 256 375 375 Separate (Fixed speed) 183 253 253 253 253 253 621 621 786 896 1255 1475 1723 N N N N motor cooling fan 183 N R R R 676 812 1014 1108 1108 1108 1303 1522 1693 2131 2313 2496 183 N N N N N N N 1413 1510 2046 2046 2265 2642 3080 3263 3446 Special winding insulation 405 N N N N N 552 552 690 690 858 858 858 N N N N for use with a variable 405 N N N N N N N 609 609 758 758 758 758 867 1279 1571 speed drive V>500V 405 N N 436 436 436 436 436 457 457 592 630 648 758 867 1279 1571 SPM Nipples 43 N N N N N 101 101 176 198 221 229 229 229 229 229 229 43 N N N N N N N 176 198 221 229 229 229 229 S S 43 N N N N N N N 176 198 221 229 229 229 229 S S Test - Routine 148 136 136 136 136 136 152 152 152 152 159 159 159 159 159 159 159 148 N 136 136 136 136 152 152 152 152 159 159 159 159 159 159 159 148 N N 136 136 136 152 152 152 152 159 159 159 159 159 159 159 Test - Type test report from 145 57 57 57 57 57 56 56 56 56 83 83 83 122 122 122 122 test of an identical motor 145 N 57 57 57 57 56 56 56 56 83 83 83 122 122 122 122 (where available) Alloy Cast iron Flameproof N Not available R On request S Standard Please contact ABB if you require optional extras that are not listed above 33

ABB LV motors - total market offer Additional ABB motors General Purpose Motors 56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400 Aluminium motors, basic offer with eff2 efficiency Steel motors Aluminium motors, option with eff1 efficiency Cast iron motors Brake motors Open drip proof motors Single-phase Process Performance Motors 56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400 Aluminium motors Cast iron motors Hazardous area, Marine motors 56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400 Flameproof motors Increased safety motors (al 90-250, cast iron 80-400) Non-sparking motors (al 90-250, cast iron 71-400) DIP motors (al 90-250, cast iron 71-355) Hazardous areas Steel motors Aluminium motors Cast iron motors Open drip proof motors Marine General Purpose Motors Process Performance Motors Special Motors * Standard applications * Demanding applications * Roller table motors * Perfect for OEM s * Perfect for end-customers & OEM s * High speed motors * Excellent availability * Short lead times, engineered to all applications * Permanent magnet motors * Large number of variants * Large number of variants as standard * Water cooled motors * eff2, eff1 as option * Reliable, energy saving * Motors with adjusted brake * eff1 * Wind turbine generators 34

FAXBACK Fax to ABB: 020 8667 9426 Please send me more information on the following Technical Update FactFiles 1 CE Marking of explosion proof motors 2 Raising environmental standards with ISO 14001 3 European agreement on low voltage electric motor efficiency 4 Bearing currents in modern drive systems 5 Metric threads for cable glands on three-phase AC motors 6 Motor control with DTC 7 EMC compliant installation for a power drive system 8 CE Marking of Dust Ignition Proof Motors 9 Reducing harmonics caused by variable speed drives 10 Electric motor efficiency changes in North America 11 Starting methods for AC motors 12 Testing temperature rise in induction asynchronous motors 13 Compliance to EN50021 by explosion proof motors, Eex na 14 Dimensioning of a drive system 15 Braking a drives system 16 The world of ABB LV Motors (voltages and frequencies worldwide) Technical Guides 1 Direct Torque Control 2 EU Directive & Power Drive Systems 3 EMC Compliant Installation 4 Guide to Variable Speed Drives 5 Bearing Currents in AC Drive Systems 6 Guide to Harmonics with AC Drives 7 Dimensioning of a Drive System 8 Electrical Braking Services and Software Tools Services Drives Software AC drives ABB component drive ACS50, 0.18 to 2.2 kw; ACS100, 0.12 kw - 2.2 kw ABB general machinery drive ACS140, 0.12 kw - 2.2 kw ABB decentralised drive ACS160, 0.55 kw - 2.2 kw ABB standard drive ACS550, 0.75-355 kw ABB industrial drive ACS800, stand-alone single drive, 0.55-2,800 kw ACS800 multidrive, 1.5 kw - 5,600 kw ABB medium voltage drive ACS1000 MV drive - 315 kw to 5,000 kw ACS1000i - Integrated Medium Voltage AC Drive ACS6000 MV drive 3-27 MW Power quality filters DC drives and DC motors Standard DC Drives 20 to 1,000 A DCS400 Digital DC converter Industrial DC Drives 20 to 5,200 A DCS500 Digital Thyristor converter DMI motors DMP motors Your address Name: Position: Company: Address: Postcode: Telephone: Telefax: E-mail: Your application Driven machinery (eg fan, pump, extruder, conveyor etc) Number of drives/motors and their nominal power rating (kw) Speed range (lowest to highest) Supply voltage (single or three phase) Motor nameplate details if fitting to existing motor or Motor requirements if new motor required AC motors Motors 400 V 50 Hz - Motors for all applications (28 pages) Low voltage general purpose motors (228 pages) Low and high voltage process performance motors (144 pages) Flameproof motors Increased safety motors Non-sparking motors Motors for dust ignition protection Marine motors Special requirements (eg. use in hazardous areas) Other details Large AC machines HXR cage induction machine High voltage modular induction motors Wound rotor induction motors Your details will be held on a database and we may send information later about special offers and other products of likely interest to you. If you do not want to benefit from this service, please tick here: ABB Limited, 9 The Towers, Wilmslow Road, Didsbury, Manchester M20 2AB United Kingdom Telephone: +44 (0) 161 445 5555 35

To find out more call: 07000 DRIVES (07000 374837) 07000 MOTORS (07000 668677) Or visit: www.abb.co.uk/energy D&M CAT2005v1/FEB05/10,000 ABB Limited 9 The Towers Wilmslow Road Didsbury Manchester M20 2AB United Kingdom Tel: +44 (0) 161 445 5555 Fax: +44 (0) 161 445 6066 www.abb.co.uk Copyright 2005 by ABB. All rights reserved. Specifications subject to change without notice.