Formula TRE Powered Seating - PDF Free Download

Parts Catalog Issued: Aug 2, 208 Formula TRE Powered Seating TDX Power Wheelchairs

Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: -800-333-6900 For Faxed In Orders Call: -800-678-4682 or -440-366-0709 For Technical Service Call: -800-832-4707 Literature Can Be Found at: www.invacare.com or -800-828-6272 Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 208 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Blue Medallion Design, SureStep, Storm Series, TDX are registered trademarks and Formula, Contoura, Personal Back 0, DualFlex, MKIV, MK5, EX, and TCD are trademarks of Invacare Corporation. Otto Bock is a registered trademark owned by Otto Bock Orthopaedische Industrie GMBH & Co.. JAY Back is a registered trademark of Sunrise Medical HHG, Inc. Corporation.

TABLE of CONTENTS Description Page Number A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!)... 7 Accessories - Arm Pads - Otto Bock... 54 Accessories - Back Cane Push Handle Attachments - Contoura Seating... 58 Accessories - Back Cane Push Handle Attachments - Conventional Tilt & Tilt w/ BPO Option 56 Accessories - Headrest Support Assembly - Matrx Elan MEHSP-0,4... 64 Accessories - Headrest Support Assembly - Stealth CP75/CP275/CP80/CP280... 62 Accessories - Headrest Supports - Tarsys... 60 Accessories - Lateral Supports - Stealth - Contoura Seating TWB-CPR/TWB-CPRL... 75 Accessories - Lateral Supports - Stealth - Conventional Recline - T/R & Recline w/ BPO Option TWB-TPR/TWB-TPRL 7 Accessories - Lateral Supports - Stealth - Conventional Tilt & Tilt w/ BPO Option TWB-RPR/TWB-RPRL 68 Accessories - Lateral Supports - Tarsys - Contoura Seating CSLM/CSLL... 72 Accessories - Lateral Supports - Tarsys - Conventional Recline - T/R & Recline w/ BPO Option TMSLM/TMSLL 69 Accessories - Lateral Supports - Tarsys - Conventional Tilt & Tilt w/ BPO Option TMSLM/TMSLL 65 Accessories - Miscellaneous... 202 Accessories - Personal Back0 (TALL Regular/TALL Plus) Mtg. Hdwr. - Conventional Recline w/ BPO Option 98 Accessories - Power Wheelchair Tool Kit... 200 Accessories - Seat & Chest Positioning Strap Mounting Hardware... 96 Accessories - Seat & Chest Positioning Straps without Mounting Hardware... 94 Accessories - Vent Tray Assembly without Mounting Hardware... 86 Accessories - Vent Tray Kits... 77 Accessories - Vent Tray Mounting Hardware - Conventional & Contoura Recline Only... 90 2

TABLE of CONTENTS Description Page Number Accessories - Vent Tray Mounting Hardware - Conventional Tilt & BPO Option... 88 Accessories - Vent Tray Mounting Hdwr. - Conventional Tilt/Recline - (Contoura Tilt & T/R) & All T/R w/ BPO Option 92 Actuator Module - Elevate Integrated (EIAM) - For Elevate Actuator Motor w/ MK6i Electronics 57 Actuator Module - Recline Integrated Actuator Module (RIAM) For Recline & Tilt/Recline... 59 Actuator Motor - Elevate & Mounting Hardware... 55 Actuator Motor - Recline & Mounting Hardware... 53 Actuator Motor - Tilt & Mounting Hardware... 5 Arms - Mounting Hardware - Conventional & Contoura - Recline & Tilt/Recline Seating... 35 Arms - Mounting Hardware - Conventional & Contoura Tilt Seating... 38 Arms - Mounting Swingaway Hardware - Elevate Only For ASBA/ADJASBA Seating... 3 Arms - Mtg. Front/Rear Arm Socket Asbly. & Hdwr. - Elevate Only For ADJASBA Seat (6" - 22" W) (After 7/4/05) 33 Arms - w/o Mounting Hardware - Adjustable Height - Elevate Only or Tilt Seating... 26 Arms - w/o Mounting Hardware - Fixed Height - Elevate Only or Tilt Seating... 22 Arms - w/o Mounting Hardware - Recline & Tilt/Recline... 29 Backs - Contoura without Mounting Hardware - Before 5/5/09... 74 Backs - Conventional without Mounting Hardware... 69 Backs - Curve Contoura without Mounting Hardware - After 5/4/09... 78 Backs - Mounting Hardware - Contoura - ADJASBA Only - Before 5/5/09... 89 Backs - Mounting Hardware - Contoura Recline & Tilt/Recline - Before 5/5/09... 9 Backs - Mounting Hardware - Contoura Tilt - Before 5/5/09... 87 Backs - Mounting Hardware - Conventional Recline & Tilt/Recline - Before 5/5/09... 85 3

TABLE of CONTENTS Description Page Number Backs - Mounting Hardware - Conventional Tilt - Before 5/5/09... 83 Backs - Mounting Hardware - Curve Contoura - After 5/4/09... 93 Backs - Prop Rod Assembly - Contoura Tilt... 95 Backs - Recline Shear Link Assemblies... 97 Battery Box Hdwr. - Door Asbly. - Elevate Actuator Motor - Elevate For ASBA/ADJASBA - Conv. & Contoura Seating 8 Battery Box Hdwr. & Door Asbly. - Non-Elevate Conv. & Contoura Seating... 5 Battery Support Bracket Assembly TRBKTS Option... 20 Battery Tray Asbly. & Wire Harnesses For Vent Tray (3) 22NF Batteries... 22 Battery Wire Harnesses - Sensor Proximity Switch - Extension Cables & Energy Chain - All Elevate Systems 24 Canes - Back - Back Frame - Slide Blocks & Sleeves - Contoura Seating... Canes - Back - Slide Blocks & Sleeves - Conventional Recline - BPO Recline & Tilt/Recline. 09 Canes - Back - Solid Straight w/o Push Handle & Mtg. Hdwr. - Conventional Tilt & Tilt w/ BPO Option 07 Canes - Back - Spreader Bars & Hdwr. (6" - 22" W) - Elevate Only For ASBA Seating (Before 7/5/05) 99 Canes - Back & Spreader Bars (6" - 22" W) - Elevate Only For ADJASBA Seating (After 7/4/05) 02 Canes - Back Att. Hdwr. (6" - 22" W) Elevate Only For ADJASBA Seating (After 7/4/05)... 05 Cushions - Seat - Contoura Seating... 64 Electronics - MK5 ~PLEASE READ THIS FIRST~... 52 Electronics - MK6i ~PLEASE READ THIS PAGE~... 5 Frame - Tilt & Mounting Hardware... 47 Frame Finishes - Touch-Up Paints & Upholstery Options... 8 Frames - Seat & Hardware (6" - 22" W) - Elevate Only For ASBA Seating (Before 7/5/05).. 27 4

TABLE of CONTENTS Description Page Number Frames - Seat & Seat Pan w/ Hdwr. (6" - 20" W x 6" - 22" D Conventional) & (6", 8", 20" W x 6" - 22" D Contoura) Stg. 33 Frames - Seat & Seat Pan w/ Hdwr. (6" - 20" W x 6" - 22" D) - Elevate Only For ADJASBA Seating (After 7/4/05) 29 Frames - Seat & Seat Pan w/ Hdwr. (20" - 22" W x 6" - 22" D) - Elevate Only For ADJASBA Seating (After 7/4/05) 3 Frames - Seat & Seat Pan w/ Hdwr. (20" - 24" W x 6" - 22" D Conventional) & (20", 22", 24" W x 6" - 22" D Contoura) Stg. 35 Frames - Seat Mounting Hardware - Elevate Only For ADJASBA Seating (After 7/4/05)... 39 Frames - Seat Mounting Hardware - Elevate Only For ADJASBA Seating with TRBKTS Option 4 Frames - Seat Mounting Hardware - Elevate Only For ASBA Seating (Before 7/5/05)... 37 Frames - Seat Mounting Hardware - Recline Only For Conventional & Contoura Seating... 43 Frames - Seat Mounting Hardware - Tilt or Tilt/Recline For Conventional & Contoura Seating 45 Front Riggings ~PLEASE READ THIS FIRST~... 53 Label Locations For TRBKTS Option... 2 Packaging & Literature... 0 RETROFIT KITS FOR FORMULA TRE POWERED SEATING... 4 Seat Pans & Mounting Hardware - Elevate Only For ASBA Seating (Before 7/5/05)... 6 Shroud Cover - Conventional Seating... 42 Shroud Cover - Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics (After 2/28/07) 47 Shroud Covers - Contoura Seating... 40 Shroud Covers - Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics (Before 3//07) 44 Shroud Covers - Recline & Tilt/Recline Conventional or Contoura Seating w/ MK6i Electronics 49 Spreader Bar Assembly - Contoura Tilt - Recline & Tilt/Recline... 7 Spreader Bar Assembly - Conventional Recline & Tilt/Recline... 9 5

TABLE of CONTENTS Description Page Number Spreader Bar Assembly - Conventional Tilt w/o Vent... 5 Spreader Bar Assembly - Double For Conventional Tilt w/ Vent & Tilt w/ BPO Option... 3 Spring - Seat Frame Balance & Tilt Spring Assist Assemblies For Tilt & Tilt/Recline... 49 TRBKTS Option Clarification Reference... 3 Upholstery - Back Nylon - Elevate Only For ASBA/ADJASBA Seating... 67 6

A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) 7

Frame Finishes, Touch-Up Paints and Upholstery Options Frame Finishes and Touch-Up Paint Color Number Part Number Bottle Size Frame Finish 08P 03456-NLA.6 oz. Deep Purple 7P 04639-NLA.6 oz. Cobalt Blue 22P 033376-NLA.6 oz. Anthracite 24P 03450-NLA.6 oz. Wet Black 33P 03455-NLA.6 oz. Red 34P 046327-NLA.6 oz. Flat Black 6P 04632-NLA.6 oz. Electric Red 62P 046320-NLA.6 oz. Electric Blue 66P 046322-NLA.6 oz. Electric Purple 69P 0320-NLA.6 oz. Teflon Black 7P N/A N/A Silver Vein 84P 073896-NLA.6 oz. Lavender 0P 0325-NLA.6 oz. Jeweled Green 02P 0327-NLA.6 oz. Denim Blue 04P 036-NLA.6 oz. Electric Teal 05P 0326-NLA.6 oz. MIdnight Blue 5P N/A N/A Black Prism 6P N/A N/A Sunkissed Orange 7P N/A N/A Tangerine Red 8P N/A N/A Fruit Fusion 9P N/A N/A Bubblegum Pink 20P N/A N/A Grape Madness 2P N/A N/A Lolly Pop Blue 22P N/A N/A Cosmic Blue 23P N/A N/A Celestial Purple 24P N/A N/A Vivid Violet 25P N/A N/A Emerald Green 26P N/A N/A Shamrock Green 27P N/A N/A Grasshopper Green 8

Frame Finishes, Touch-Up Paints and Upholstery Options Sparkle Frame Finishes Color Number 88P Frame Finish Wet Black with Twilight Sparkle Upholstery Options For A.S.B.A. Seating Nylon Color U240 Black 9

Packaging and Literature 0

Item Number Note Part Number Description Packaging and Literature Quantity Per Package Assembly 036028 Carton, Cover 2 403X6 Insert, Plain Pad 2 3 403X0 Carton, Front Riggings 4 05592 Bag, Poly (72" L x 35" W x 9" D) 5 04398-NLA NLA - Tube, Paper 6 C 0200-NLA NLA - Carton, Joystick 7 036027 Carton, Tray 2 8 29590-NLA Carton, Corner Reinforcement 4 A 00077X03-NLA NLA - Warranty Card A 4809-NLA NLA - Owner's Manual, TDX w/ MK5 Electronics A,B 2270-NLA NLA - Owner's Manual, Formula TRE w/ MK6i Electronics NOTE: A - Not Shown B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. C - Order part #403X0 to use as a replacement Joystick Carton also. When adjusting or replacing parts, please refer to your Owner's Manual for assistance.

Label Locations For TRBKTS Option 2

TRBKTS Option Clarification Reference TRBKTS Option was introduced 2/9/05 as an On-Chair option only. 3

RETROFIT KITS FOR FORMULA TRE POWERED SEATING 4

Battery Box Hardware and Door Assembly Non-Elevate For Formula Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (-800-832-4707) Item Number Note Part Number Description E 2 F 3 4 5 E 5 E 6 A 7 8 9 0 2 3 4 5 B,D,G 6 8 9 20 2 22 5 B,D 6 8 9 20 2 22 5 C,D 6 7 8 9 20 Quantity Per Package Assembly 2873-NLA NLA - Bracket, Frame Stiffener, Black 24725 Shroud, Battery Box Isolation 25639-NLA NLA - Block, Side Support 24668-NLA NLA - Shroud, Front Battery Box 28729-NLA NLA - Bracket, Seat Frame Mounting, Black LOW 0 = 8" STF; 5 = (9-3/4" STF For 6-9" Deep) or (2-/4" STF For 20-22" Deep) 28730-NLA NLA - Bracket, Seat Frame Mounting, Black TALL 0 = 9-/4" STF; 5 = (2" STF For 6-9" Deep) or (2-/4" STF For 20-22" Deep) 25738 NLA - Kit, Non-Elevate Battery Box Assembly Hardware Tie Wrap (5-5/8" L) 4 Locknut (5/6-8) 4 Washer, Steel (5/6 x 3/4 x /6") 9 Bolt, Hex Head Cap (/4-20 x 3/4") 2 Washer (/4 x /2 x /6") 2 NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") 9 Locknut (/4-20) 2 Screw, Phillips Pan Head Tap (#0-32 x /2") 2 3357 NLA - Kit, Battery Box Door Assembly, 22NF Short NLA - Label, 22NF Terminal Configuration Warning NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (/4-20) 2 NLA - Sleeve, Door Pivot 2 NLA - Label, 22NF Battery Install/Remove 327-NLA NLA - Kit, Battery Box Door Assembly, GP24 Short NLA - Label, Terminal Configuration Warning, GP24 NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (/4-20) 2 NLA - Sleeve, Door Pivot 2 Label, Battery Install/Remove, GP24 2072-NLA Kit, Battery Box Door Assembly, 22NF Long (For Vent) NLA - Label, 22NF Terminal Configuration Warning NLA - Label, 3 Battery Configuration Warning NLA - Decal, Blank Logo NLA - Decal, Invacare Medallion - Large Locknut (/4-20) 2 6

Battery Box Hardware, Door Assembly, Elevate Actuator Motor Elevate For ASBA/ADJASBA, Conventional and Contoura Seating The Battery Boxes are non-serviceable parts in the field. Wheelchair must be returned to Invacare for repair. Call Technical Services for assistance (-800-832-4707) Item Number Note Part Number Description Quantity Per Package Assembly 22258-NLA NLA - Elevating Actuator Assembly 2 24653-NLA NLA - Bracket, Elevate, Black 3 24670 Plate, Battery Box Bottom 4 2472-NLA NLA - Shroud w/ Decals, Elevate, Battery Box 5 079203 Decal, Warning Pinch Point 2 6 24668-NLA NLA - Shroud, Front Battery Box 7 A 25739 NLA - Kit, Battery Box Assembly Hardware Elevate 8 NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") 2 9 Washer, Flat (2/64 x 53/64 x 7/64") 2 0 Screw, Socket Flat Head (/4-20 x 3/4") 3 Bolt, Hex Head Cap (/4-20 x 3/4") 3 2 Washer (/4 x /2 x /6") 3 3 Screw, Hex Head (/4-20 x -5/8") 4 4 Screw, Phillips Pan Head (#0-32 x 5/8") 4 5 NLA - Bracket, Upper Seat, Front, Black 6 NLA - Bracket, Lower Seat, Front, Black 7 Screw, Hex Head w/ Patch (5/6-8 x 3/4") 2 8 NLA - Package, Tie Wrap (5-5/8" L) 2 9 Locknut (/4-20) 6 20 Washer, Flat (3/6 x 5/8 x /6") 4 2 Screw, Phillips Pan Head Tap (#0-32 x /2") 2 22 B,C 25776 Kit, Battery Box Door Elevate Assembly, 22NF Short 23 NLA - Label, 22NF Terminal Configuration Warning 24 NLA - Decal, Blank Logo 25 NLA - Decal, Invacare Medallion - Large 26 Locknut (/4-20) 2 27 NLA - Sleeve, Door Pivot 2 28 NLA - Decal, Warning, Battery Install NOTE: A - Includes items 8-2 B - Includes items 23-28 C - Blank Logo Decal is no longer available and no longer required for item number 25 Invacare Medallion Decal. 9

Battery Support Bracket Assembly For TRBKTS Option 20

Battery Support Bracket Assembly For TRBKTS Option Item Number Note Part Number Description Quantity Per Package Assembly A 39537-NLA NLA - Kit, Battery Support Bracket Assembly - For 22NF Batteries 2 Screw, Hex Head w/ Patch (/4-20 x /2") 4 3 Locknut (/4-20) 4 4 Bracket, Battery Support, Black A 39538-NLA NLA - Kit, Battery Support Bracket Assembly - For GP24 Batteries 2 Screw, Hex Head w/ Patch (/4-20 x /2") 4 3 Locknut (/4-20) 4 4 Bracket, Battery Support, Black B 39539-NLA NLA - Kit, Battery Support Bracket Assembly - For Invisible Super Low Tilt System w/ 22NF Batteries 4 Bracket, Battery Support, Black 5 Screw, Hex Head w/ Patch (/4-20 x /2") 4 A 39540-NLA Kit, Battery Support Bracket Assembly - For Vent "Ready" System w/ 22NF Batteries 2 Screw, Hex Head w/ Patch (/4-20 x 5/8") 4 3 Locknut (/4-20) 4 4 Bracket, Battery Support, Black B 3954 NLA - Kit, Battery Support Bracket Assembly - For Vent "Option" System w/ 22NF Batteries 4 Bracket, Battery Support, Black 5 Screw, Hex Head w/ Patch (/4-20 x /2") 4 B 39867-NLA Kit, Battery Support Bracket Assembly - For Elevate "Option" System w/ 22NF Batteries 4 Bracket, Battery Support, Black 5 Screw, Hex Head w/ Patch (/4-20 x /2") 4 NOTE: A - Includes items 2-4 B - Includes items 4 and 5 2

Battery Tray Assembly and Wire Harnesses For Vent Tray (3) 22NF Batteries 22

Battery Tray Assembly and Wire Harnesses For Vent Tray (3) 22NF Batteries Item Number Note Part Number Description Quantity Per Package Assembly A,B 20363 Battery Wire Harness with Terminal Hardware, 22NF - Rear 2 A,B 20362 Battery Wire Harness with Terminal Hardware, 22NF - Front 3 A,B 243 Harness, Battery Wire with Terminal Hardware, 22NF Vent 4 672X000 Locknut (/4-20) 6 5 095502-NLA NLA - Package, Tie Wrap (-/2" L) 0 6 096799-NLA NLA - Screw, Hex Flange Whiz Lock (/4-20 x 7/8") 4 7 224-NLA NLA - Battery Strap Assembly, 22NF and GP24 2 8 225-NLA NLA - Battery Strap Assembly For Vent, 22NF 9 786-NLA NLA - Bracket, Battery Tray Stop, Black 0 9007X000 Screw, Phillips Pan Head (#0-32 x 5/6") 2 C 242-NLA NLA - Battery Tray Assembly, TDX 22NF For Vent 2 D 2029-NLA NLA - Kit, Vent Battery Harness Assembly with Hardware 3 Harness, Vent Battery 4 NLA - Harness, Vent Battery Extension 5 Screw, Phillips Pan Head (#8-6 x 5/8") 2 6 Tie Wrap (5-5/8" L) 4 7 NLA - Grommet, Rubber 2 D 3953-NLA NLA - Kit, Vent Battery Harness Assembly with Hardware For TRBKTS Option 3 Harness, Vent Battery 4 Harness, Vent Battery Extension, TRBKTS Option 5 Screw, Phillips Pan Head (#8-6 x 5/8") 2 6 Tie Wrap (5-5/8" L) 4 7 NLA - Grommet, Rubber For TRBKTS Option 6 095503-NLA NLA - Package, Tie Wrap (5-5/8" L) 0 7 055747-NLA NLA - Grommet, Rubber 7 37236-NLA NLA - Grommet, Rubber For TRBKTS Option NOTE: A - Individual components are not available for the battery wire harnesses B - Includes items 4-6 C - Includes items 7-0 D - Includes items 3-7 23

Battery Wire Harnesses, Sensor Proximity Switch, Extension Cables and Energy Chain For All Elevate Systems 24

Battery Wire Harnesses, Sensor Proximity Switch, Extension Cables and Energy Chain For All Elevate Systems Item Number Note Part Number Description 2 3 4 5 6 A 7 8 9 0 F 2 3 4 B 5 6 8 9 4 C 5 6 7 8 9 20 2 D 22 23 24 25 E 26 27 28 29 Quantity Per Package Assembly 24657-NLA NLA - Bracket, Wire Harness Mounting, Black 4308 Screw, Phillips Pan Head Tap (#0-32 x /2") 4 24654-NLA NLA - Bracket, Upper Energy Chain Mounting, Black 24655-NLA NLA - Bracket, Lower Energy Chain Mounting, Black 22586 Sensor, Proximity Switch (30 /4" L) 25742 NLA - Kit, Sensor Proximity/Actuator Switch Mounting Hardware Nut, Hex Keps (#4-40) 2 NLA - Washer, Plain (/8 x 5/6 x /32") 2 NLA - Screw, Phillips Pan Head (#4-40 x 3/8") 2 25745 Kit, Energy Chain with Mounting Hardware Screw, Phillips Pan Head Tap (#0-32 x /2") 2 02400 Sensor, Actuator Switch 23277-NLA NLA - Cable, Joystick Extension (48") 25743-NLA Kit, Battery Harness with Mounting Hardware, Elevate Nut, Keps (#6-32) 6 NLA - Screw, Phillips Pan Head (#6-32 x 7/8") 6 Tie Wrap (5-5/8" L) 3 Washer (/4 x /2 x /6") 4 4968 NLA - Kit, Battery Harness with Mounting Hardware, Elevate with TRBKTS option Nut, Keps (#6-32) 6 NLA - Screw, Phillips Pan Head (#6-32 x 7/8") 4 Screw, Phillips Pan Head (#6-32 x -/8") 2 Tie Wrap (5-5/8" L) 3 Washer (/4 x /2 x /6") 4 Spacer (/4 x 5/8 x 3/8") 2 See Note See Footnote 672X000 Locknut (/4-20) 2 095502-NLA NLA - Package, Tie Wrap (-/2" L) 0 096799-NLA NLA - Screw, Hex Flange Whiz Lock (/4-20 x 7/8") 2574-NLA NLA - Kit, Front Battery Harness with Terminal Hardware Locknut (/4-20) 2 Tie Wrap (-/2" L) 4 NLA - Screw, Hex Flange Whiz Lock (/4-20 x 7/8") 2 2673 Harness, Elevate Actuator Extension 25

NOTE: Battery Wire Harnesses, Sensor Proximity Switch, Extension Cables and Energy Chain For All Elevate Systems A - Includes items 7-9 B - Includes the Battery Harness and items 5, 6, 8 and 9 C - Includes the Battery harness and items 5-20 D - Rear Battery Harness Kit that included the Rear Battery Harness is no longer available as a service part. E - Includes the Front Battery Harness and items 26-28 F - Includes the Energy Chain and item 26

Seat Frame and Hardware (6"-22" Wide) Elevate Only For ASBA Seating (Before 7/5/05) # Seat Frame with Hardware Chair Width 6"-7" Deep 8" - 9" Deep 20" - 2" Deep 22" Deep 6" Wide 833-NLA 8322-NLA 833-NLA 8340-NLA 7" Wide 834-NLA 8323-NLA 8332-NLA 834-NLA 8" Wide 835-NLA 8324-NLA 8333-NLA 8342-NLA 9" Wide 836-NLA 8325-NLA 8334-NLA 8343-NLA 20" Wide 837-NLA 8326-NLA 8335-NLA 8344-NLA 2" Wide 838-NLA 8327-NLA 8336-NLA 8345-NLA 22" Wide 839-NLA 8328-NLA 8337-NLA 8346-NLA NOTE: Seat frame includes items 2-5 27

Seat Frame and Hardware (6"-22" Wide) Elevate Only For ASBA Seating (Before 7/5/05) Item Number Note Part Number Description 2 3 4 5 Quantity Per Package Assembly See Chart # Seat Frame with Hardware 02950 Plug Button, Black (") 2 090768 Kit, Lock Handle w/rivets (Pair) 2 4747X074 Spring, Arm Lock 2 028594 Pin, Arm Lock, Black 2 28

ADJASBA Seat Frame, Seat Pan and Hardware (6"-20" Wide) x (6"-22" Deep) After 7/4/05 29

ADJASBA Seat Frame, Seat Pan and Hardware (6"-20" Wide) x (6"-22" Deep) After 7/4/05 Item Number Note Part Number Description Quantity Per Package Assembly D 20288 Frame, Center Seat, Black 2 22475 Crossbar, Seat Frame (6" - 20" W) 4 3 22647 Rail, Seat Frame (6-20" D For Formula TRE and 2 6-9" D For ADJASBA) 3 22677 Rail, Seat Frame (20-22" D Formula TRE) (9-2 22" D ADJASBA) 4 24386 Pan, Seat with Hook and Loop Fasteners (6-20" W) x (6-20" D For Formula TRE) & (6-9" D For ADJASBA) 4 24666 Pan, Seat, with Hook and Loop Fasteners (6-20" W) x (20-22" D For Formula TRE) & (9-22" D For ADJASBA) 5 A 043082 Hook Fastener with Adhesive Back (2" W x 8" L) 2 5 A 044580 Loop Fastener with Adhesive Back (2" W x 8" L) 2 5 B 043084 Hook Fastener with Adhesive back (2" W x 22" L) 2 5 B 044584 Loop Fastener with Adhesive back (2" W x 22" L) 2 6 C 3550 Kit, Seat Frame Assembly Hardware 7 Screw, Hex Head w/ Patch (/4-20 x 3/4") 8 8 Washer (/4 x /2 x /6") 2 9 Spacer, Coved (/4 x /6 x /2") 4 0 Screw, Socket Button (/4-20 x 3/4") 2 Pin, Roll (3/6 x ") 2 2 4823 Decal, Seat Adjustment Warning 2 NOTE: A - For 6"-9" deep seats B - For 9"-22" deep seats C - Includes items 7- D - When ordering Center Seat Frame (item ), also order 2 ea. Seat Adjustment Warning Decal (item 2). 30

ADJASBA Seat Frame, Seat Pan and Hardware (20"-22" Wide) x (6"-22" Deep) After 7/4/05 3

ADJASBA Seat Frame, Seat Pan and Hardware (20"-22" Wide) x (6"-22" Deep) After 7/4/05 Item Number Note Part Number Description Quantity Per Package Assembly D 20288 Frame, Center Seat, Black 2 20283 Crossbar, Seat Frame (20" - 24" W) 4 3 22647 Rail, Seat Frame (6-20" D For Formula TRE and 2 6-9" D For ADJASBA) 3 22677 Rail, Seat Frame (20-22" D Formula TRE) (9-2 22" D ADJASBA) 4 24388 Pan, Seat, with Hook and Loop Fasteners (20-24" W) x (6-20" D For Formula TRE) & (6-9" D For ADJASBA) 4 24667 Pan, Seat with Hook and Loop Fasteners (20-24" W) x (20-22" D For Formula TRE) & (9-22" D For ADJASBA) 5 A 043082 Hook Fastener with Adhesive Back (2" W x 8" L) 2 5 A 044580 Loop Fastener with Adhesive Back (2" W x 8" L) 2 5 B 043084 Hook Fastener with Adhesive back (2" W x 22" L) 2 5 B 044584 Loop Fastener with Adhesive back (2" W x 22" L) 2 6 C 3550 Kit, Seat Frame Assembly Hardware 7 Screw, Hex Head w/ Patch (/4-20 x 3/4") 8 8 Washer (/4 x /2 x /6") 2 9 Spacer, Coved (/4 x /6 x /2") 4 0 Screw, Socket Button (/4-20 x 3/4") 2 Pin, Roll (3/6 x ") 2 2 4823 Decal, Seat Adjustment Warning 2 NOTE: A - For 6"-9" deep seats B - For 9"-22" deep seats C - Includes items 7- D - When ordering Center Seat Frame (item ), also order 2 ea. Seat Adjustment Warning Decal (item 2). 32

Seat Frame, Seat Pan and Hardware (6"-20" Wide x 6"-22" Deep Conventional) and (6", 8", 20" Wide x 6"-22" Deep Contoura) Seating 33

Seat Frame, Seat Pan and Hardware (6"-20" Wide x 6"-22" Deep Conventional) and (6", 8", 20" Wide x 6"-22" Deep Contoura) Seating Item Number Note Part Number Description Quantity Per Package Assembly 22676-NLA NLA - Frame, Center Seat, Black For Conventional and Contoura Seating 2 22475 Crossbar, Seat Frame (6" - 20" W) 4 3 A 22647 Rail, Seat Frame (6-20" D For Formula TRE and 2 6-9" D For ADJASBA) 3 B 22677 Rail, Seat Frame (20-22" D Formula TRE) (9-2 22" D ADJASBA) 4 A 24386 Pan, Seat with Hook and Loop Fasteners (6-20" W) x (6-20" D For Formula TRE) & (6-9" D For ADJASBA) 4 B 24666 Pan, Seat, with Hook and Loop Fasteners (6-20" W) x (20-22" D For Formula TRE) & (9-22" D For ADJASBA) 5 A 043082 Hook Fastener with Adhesive Back (2" W x 8" L) 2 5 A 044580 Loop Fastener with Adhesive Back (2" W x 8" L) 2 5 B 043084 Hook Fastener with Adhesive back (2" W x 22" L) 2 5 B 044584 Loop Fastener with Adhesive back (2" W x 22" L) 2 6 D,E 25737-NLA NLA - Kit, Seat Frame Assembly Hardware 7 Screw, Hex Head w/ Patch (/4-20 x 3/4") 8 8 Washer (/4 x /2 x /6") 4 9 Pin, Roll (3/6 x ") 2 0 Spacer, Coved (/4 x /6 x /2") 6 Locknut (/4-20) 2 2 Screw, Socket Button Head (/4-20 x -/2") 2 2 Screw, Socket Button (/4-20 x 3/4") 2 NOTE: A - For 6"-20" deep Conventional and 6"-8" deep Contoura Seating B - For 20"-22" deep Conventional and 9"-2" deep Contoura Seating D - Includes items 7-2 E - After 7/4/05 Threaded Inserts were added to the Center Seat Frame. Items 0 and were no longer needed for item 2 screw. Item 2 was shortened to 3/4" long. 34

Seat Frame, Seat Pan and Hardware (20"-24" Wide x 6"-22" Deep Conventional) and (20", 22", 24" Wide x 6"-22" Deep Contoura) Seating 35

Seat Frame, Seat Pan and Hardware (20"-24" Wide x 6"-22" Deep Conventional) and (20", 22", 24" Wide x 6"-22" Deep Contoura) Seating Item Number Note Part Number Description Quantity Per Package Assembly 22676-NLA NLA - Frame, Center Seat, Black For Conventional and Contoura Seating 2 20283 Crossbar, Seat Frame (20" - 24" W) 4 3 A 22647 Rail, Seat Frame (6-20" D For Formula TRE and 2 6-9" D For ADJASBA) 3 B 22677 Rail, Seat Frame (20-22" D Formula TRE) (9-2 22" D ADJASBA) 3 C 3445-NLA NLA - Rail, Seat Frame (22" D) 2 4 A 24388 Pan, Seat, with Hook and Loop Fasteners (20-24" W) x (6-20" D For Formula TRE) & (6-9" D For ADJASBA) 4 B 24667 Pan, Seat with Hook and Loop Fasteners (20-24" W) x (20-22" D For Formula TRE) & (9-22" D For ADJASBA) 4 C 3448-NLA NLA - Pan, Seat, with Hook and Loop Fasteners (20-24" W x 22" D) 5 A 043082 Hook Fastener with Adhesive Back (2" W x 8" L) 2 5 A 044580 Loop Fastener with Adhesive Back (2" W x 8" L) 2 5 B,C 043084 Hook Fastener with Adhesive back (2" W x 22" L) 2 5 B,C 044584 Loop Fastener with Adhesive back (2" W x 22" L) 2 6 D,E 25737-NLA NLA - Kit, Seat Frame Assembly Hardware 7 Screw, Hex Head w/ Patch (/4-20 x 3/4") 8 8 Washer (/4 x /2 x /6") 4 9 Pin, Roll (3/6 x ") 2 0 Spacer, Coved (/4 x /6 x /2") 6 Locknut (/4-20) 2 2 Screw, Socket Button Head (/4-20 x -/2") 2 2 Screw, Socket Button (/4-20 x 3/4") 2 NOTE: A - For 6"-20" deep Conventional and 6"-8" deep Contoura Seating B - For 20"-22" deep Conventional and 9"-2" deep Contoura Seating C - 22" deep Contoura Seating D - Includes items 7-2 E - After 7/4/05 Threaded Inserts were added to the Center Seat Frame. Items 0 and were no longer needed for item 2 screw. Item 2 was shortened to 3/4" long. 36

Seat Frame Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) 37

Seat Frame Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) Item Number Note Part Number Description Quantity Per Package Assembly A 25777-NLA Kit, A.S.B.A. Seat Frame Mounting Hardware 2 NLA - Screw, Hex Head w/ Patch (5/6-8 x -/2") 4 3 NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") 6 4 Washer, Flat (2/64 x 53/64 x 7/64") 6 5 NLA - Bracket, Seat Frame Mounting, Black - Right 5 NLA - Bracket, Seat Frame Mounting, Black - Left 6 Locknut (5/6-8) 0 7 Screw, Hex Head w/ Patch (5/6-8 x -/4") 4 8 NLA - Plate, A.S.B.A. Seat Frame Mounting 9 NLA - Nut, Strap 2 0 Decal, Seat Adjustment Warning 2 NOTE: A - Includes items 2-0 38

Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating (After 7/4/05) 39

Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating (After 7/4/05) Item Number Note Part Number Description Quantity Per Package Assembly A 33804-NLA Kit, ADJASBA Seat Frame Mounting Hardware 2 NLA - Screw, Socket Head (5/6-8 x 3/4") 4 3 NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") 6 4 Washer, Flat (2/64 x 53/64 x 7/64") 6 5 NLA - Bracket, Seat Frame Mounting, Black - Right 5 NLA - Bracket, Seat Frame Mounting, Black - Left 6 Locknut (5/6-8) 0 7 Screw, Hex Head w/ Patch (5/6-8 x -/4") 4 8 NLA - Plate, A.S.B.A. Seat Frame Mounting 9 NLA - Nut, Strap 2 0 Decal, Seat Adjustment Warning 2 NOTE: A - Includes items 2-0 40

Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating with TRBKTS Option 4

Seat Frame Mounting Hardware Elevate Only For ADJASBA Seating with TRBKTS Option Item Number Note Part Number Description 2 3 4 5 5 6 7 8 9 0 2 NOTE: A 34945-NLA A - Includes items 2-2 Quantity Per Package Assembly Kit, ADJASBA Seat Frame Mounting Hardware For TRBKTS Option Screw, Socket Head w/ Patch (5/6-8 x 7/8") 6 NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") 6 Washer, Flat (2/64 x 53/64 x 7/64") 6 NLA - Bracket, Seat Frame Mounting, Black - Right NLA - Bracket, Seat Frame Mounting, Black - Left Locknut (5/6-8) 8 Screw, Hex Head w/ Patch (5/6-8 x -/4") 4 NLA - Plate, A.S.B.A. Seat Frame Mounting NLA - Nut, Strap 2 Decal, Seat Adjustment Warning 2 Plate, Nut (5/6-8) 2 NLA - Washer, Ground (/32 x 3/6 x /8") 6 42

Seat Frame Mounting Hardware Recline Only For Conventional and Contoura Seating 43

Item Number Note Part Number Description Seat Frame Mounting Hardware Recline Only For Conventional and Contoura Seating Quantity Per Package Assembly 25646-NLA NLA - Plate, Recline Only Seat Frame Mounting 2 A 2575 Kit, Seat Frame Mounting Hardware, Recline Only Non-Elevate 3 Screw, Hex Head (5/6-8 x ") 4 4 Screw, Hex Head w/ Patch (5/6-8 x -/4") 4 5 Spacer (5/6 x 7/6 x 3/8") 2 6 Locknut (5/6-8) 8 NOTE: A - Includes items 3-6 44

Seat Frame Mounting Hardware Tilt or Tilt/Recline For Conventional & Contoura Seating 45

Seat Frame Mounting Hardware Tilt or Tilt/Recline For Conventional & Contoura Seating Item Number Note Part Number Description Quantity Per Package Assembly A 25749 NLA - Kit, Seat Frame Mounting Hardware 2 NLA - Screw, Shoulder Hex Socket Head (/2 x 2 3-/4", 3/8-6) 3 Washer, Flat (3/8 x /6 x /6") 2 4 Locknut, Low Profile (3/8-6) 2 NOTE: A - Includes items 2-4 46

Tilt Frame and Mounting Hardware 47

Tilt Frame and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly 22656 Frame with Warning Decals, Tilt, Black 2 22598-NLA NLA - Decal, Warning Actuator/Spring Assist Hardware 3 079203 Decal, Warning Pinch Point 2 4 25748-NLA NLA - Kit, Bumper Assembly 2 5 A 25747 NLA - Kit, Tilt Frame Mounting Hardware 6 Screw, Hex Head w/ Patch (5/6-8 x -/4") 4 7 Locknut (5/6-8) 4 NOTE: A - Includes items 6-7 48

Balance Spring and Tilt Spring Assist Assemblies For Tilt and Tilt/Recline 49

Balance Spring and Tilt Spring Assist Assemblies For Tilt and Tilt/Recline Item Number Note Part Number Description Quantity Per Package Assembly A 25750 NLA - Kit, Balance Spring Assembly 2 Locknut (/4-20) 3 NLA - Guide, Rod 4 NLA - Spring, Compression ( x 5-/2 x /4") 5 NLA - Rod, Balance Spring 6 NLA - Plate, Slide Support 4 7 NLA - Screw, Socket Flat Head w/ Patch (#0-32 x 4 3/8") 8 Pin, Roll (/8 x 3/4") 9 NLA - Bracket, Balance Spring, Black 0 B 24673 NLA - Kit, Spring Assist Hardware 400 Lb. Limit Non-Elevate NLA - Screw, Shoulder Hex Socket Head (5/6" x 2-3/4", /4-20) 2 Spring, Cylinder Assist 2 3 Locknut (/4-20) 2 4 NLA - Spacer, Spring Assist (5/6 x 5/8 x 9/6") 2 NOTE: A - Includes items 2-9 B - Includes items -4 50

Tilt Actuator Motor and Mounting Hardware 5

Tilt Actuator Motor and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly C 2269-NLA NLA - Motor, Tilt Actuator without Mounting Hardware - MK5 B 4635 Motor, Tilt Actuator without Mounting Hardware - MK6i 2 A 25746 Kit, Tilt Actuator Motor Mounting Hardware 3 NLA - Ring, Retaining 2 4 NLA - Rod, Reinforcing 5 NLA - Stand-Off, Actuator Motor 6 Screw, Shoulder Hex Socket Head (3/8 x -3/4", 5/6-8) 7 NLA - Bracket, Adjustable Clevis, Black 8 Washer, Steel (5/6 x 3/4 x /6") 9 Locknut (5/6-8) 0 Screw, Hex Head w/ Patch (5/6-8 x 5/8") Washer, Flat (5/6 x 5/8 x /6") 2 NLA - Nut, Hex Jam (/2-20) 2 3 Locknut (/2-20) NOTE: A - Includes items 3-3 B - For MK6i Electronics only. Includes the Actuator Motor, Bushings and the Integrated Actuator Module (IAM) attached to the motor. The IAM is not available separately. NOTE: Part # 40033 referenced on the motor is not available, refer to part # 4635. C - Includes the Actuator Motor and Bushings. NOTE: Part # 34695 referenced on the motor is not available, refer to part # 2269. 52

Recline Actuator Motor and Mounting Hardware 53

Recline Actuator Motor and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly D 25635-NLA NLA - Motor, Recline Actuator - MK5 C 46350-NLA NLA - Motor, Recline Actuator - MK6i 2 A 25752-NLA NLA - Kit, Recline Actuator Motor Mounting Hardware Conventional 3 NLA - Screw, Shoulder Hex Socket Head (3/8 x 2-3/4", 5/6-8) 4 Washer, Flat (5/6 x 5/8 x /6") 5 Locknut (5/6-8) 2 6 Spacer (3/8 x x /2") 2 7 NLA - Bushing, Actuator Motor (3/8 x 3/4 x 5/32") 2 8 Screw, Shoulder Hex Socket Head (3/8 x -3/4", 5/6-8) 9 B 25753-NLA NLA - Kit, Recline Actuator Motor Mounting Hardware Contoura 0 Screw, Shoulder Hex Socket (3/8 x 2", 5/6-8) Washer, Flat (5/6 x 5/8 x /6") 2 Locknut (5/6-8) 2 3 NLA - Bushing, Actuator Motor (3/8 x 3/4 x 5/32") 2 4 Screw, Shoulder Hex Socket Head (3/8 x -3/4", 5/6-8) NOTE: A - Includes items 3-8 B - Includes items 0-4 C - Used with MK6i Electronics only. Includes the Actuator Motor and Bushings. NOTE: Part # 3695 referenced on the motor is not available, refer to part # 46350. D - Includes the Actuator Motor and Bushings. NOTE: Part # 22257 referenced on the motor is not available, refer to part # 25635. 54

Elevate Actuator Motor and Mounting Hardware Elevate For ASBA/ADJASBA, Conventional and Contoura Seating 55

Elevate Actuator Motor and Mounting Hardware Elevate For ASBA/ADJASBA, Conventional and Contoura Seating Item Number Note Part Number Description Quantity Per Package Assembly F 22258-NLA NLA - Elevating Actuator Assembly 2 24653-NLA NLA - Bracket, Elevate, Black 3 24670 Plate, Battery Box Bottom 4 2472-NLA NLA - Shroud w/ Decals, Elevate, Battery Box 5 079203 Decal, Warning Pinch Point 2 6 24668-NLA NLA - Shroud, Front Battery Box 7 A 25739 NLA - Kit, Battery Box Assembly Hardware Elevate 8 NLA - Screw, Hex Head w/ Patch (5/6-8 x 7/8") 2 9 Washer, Flat (2/64 x 53/64 x 7/64") 2 0 Screw, Socket Flat Head (/4-20 x 3/4") 3 Bolt, Hex Head Cap (/4-20 x 3/4") 3 2 Washer (/4 x /2 x /6") 3 3 Screw, Hex Head (/4-20 x -5/8") 4 4 Screw, Phillips Pan Head (#0-32 x 5/8") 4 5 NLA - Bracket, Upper Seat, Front, Black 6 NLA - Bracket, Lower Seat, Front, Black 7 Screw, Hex Head w/ Patch (5/6-8 x 3/4") 2 8 NLA - Package, Tie Wrap (5-5/8" L) 2 9 Locknut (/4-20) 6 20 Washer, Flat (3/6 x 5/8 x /6") 4 2 Screw, Phillips Pan Head Tap (#0-32 x /2") 2 22 B,C 25776 Kit, Battery Box Door Elevate Assembly, 22NF Short 23 NLA - Label, 22NF Terminal Configuration Warning 24 NLA - Decal, Blank Logo 25 NLA - Decal, Invacare Medallion - Large 26 Locknut (/4-20) 2 27 NLA - Sleeve, Door Pivot 2 28 NLA - Decal, Warning, Battery Install NOTE: A - Includes items 8-2 B - Includes items 23-28 C - Blank Logo Decal is no longer available and no longer required for item number 25 Invacare Medallion Decal. F - Elevate Actuator Motor uses the Elevate Integrated Actuator Module (EIAM) when MK6i Electronics are used 56

Elevate Integrated Actuator Module (EIAM) For Elevate Actuator Motor w/ MK6i Electronics 57

Elevate Integrated Actuator Module (EIAM) For Elevate Actuator Motor w/ MK6i Electronics Item Number Note Part Number Description Quantity Per Package Assembly 40036 Module, Elevate Integrated Actuator (EIAM) - MK6i (54" L) 2 A 25685-NLA NLA - Kit, MK5 SAC-E/ MK6i EIAM Mounting Hardware 3 Screw, Phillips Pan Head Tap (#0-32 x /2") 2 4 NLA - Bracket, Mounting, Black 5 NLA - Stud Plate, Quad Link 2 NOTE: A - Includes items 3-5 58

Recline Integrated Actuator Module (RIAM) For Formula Recline and Tilt/Recline 59

Recline Integrated Actuator Module (RIAM) For Formula Recline and Tilt/Recline Item Number Note Part Number Description Quantity Per Package Assembly A 4545-NLA NLA - Kit, MK6i Recline Integrated Actuator Module (RIAM) w/ Mtg. Hardware 2 Module, Recline Integrated Actuator (RIAM) - MK6i (36" L) 3 NLA - Bracket, MK6i Recline Integrated Actuator Module, Black (RIAM) 4 Screw, Phillips Pan Head (#4-40 x /2") 4 5 Locknut (/4-20) 2 6 Bracket, MK6i Connector, Black 7 Screw, Socket Button (/4-20 x 3/4") 2 2 40034 Module, Recline Integrated Actuator (RIAM) - MK6i (36" L) 3 45403-NLA NLA - Bracket, MK6i Recline Integrated Actuator Module, Black (RIAM) 4 02742 Screw, Phillips Pan Head (#4-40 x /2") 5 02595 Locknut (/4-20) 2 6 60374 Bracket, MK6i Connector, Black 7 009838 Screw, Socket Button (/4-20 x 3/4") 2 NOTE: A - Includes items 2-7. Kit is used for Conventional and Contoura Seating 60

Seat Pan and Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) 6

Seat Pan and Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) # Seat Pan 6" Deep - 8" Deep Chair Width 6" Deep 7" Deep 8" Deep 6" W 06603-NLA 066024 066035-NLA 7" W 06604-NLA 066025-NLA 066036-NLA 8" W 06605-NLA 066026 066037-NLA 9" W 06606-NLA 066027-NLA 066038-NLA 20" W 06607-NLA 066028-NLA 066039-NLA 2" W 06608-NLA 066029-NLA 066040-NLA 22" W 06609-NLA 066030-NLA 06604-NLA # Seat Pan 9" Deep - 22" Deep Chair Width 9" Deep 20" Deep 2" Deep 22" Deep 6" W 066046-NLA 066057-NLA 066068-NLA 066079-NLA 7" W 066047-NLA 066058-NLA 066069-NLA 066080-NLA 8" W 066048-NLA 066059-NLA 066070-NLA 06608-NLA 9" W 066049-NLA 066060 06607-NLA 066082-NLA 20" W 066050-NLA 06606-NLA 066072-NLA 066083-NLA 2" W 06605-NLA 066062-NLA 066073-NLA 066084-NLA 22" W 066052-NLA 066063-NLA 066074-NLA 066085-NLA 62

Seat Pan and Mounting Hardware Elevate Only For ASBA Seating (Before 7/5/05) Item Number Note Part Number Description 6 2 3 4 5 Quantity Per Package Assembly See Chart # Seat Pan 6"-8" Depth See Chart # Seat Pan 9"-22" Depth 070459-NLA NLA - Kit, Seat Pan Mounting Hardware Screw, Hex Head (/4-20 x -5/8") 2 Screw, Hex Head (/4-20 x -/2") 4 Spacer (/4 x 3/8 x 3/6") 4 Locknut (/4-20) 6 63

Seat Cushion Assembly Contoura Seating # Contoura Seat Cushion Assembly NOTE: To order a Mesh Contoura Seat Cushion Assembly, please use quote # SM-0090800838 when placing your order. Chair Width 6" Deep 7" Deep 8" Deep 9" Deep 20" Deep 2" Deep 22" Deep 6" Wide 32982 32983-NLA 32984 32985 32986 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A N/A N/A 8" Wide 32987 32988-NLA 32989 32990 3299 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A N/A N/A 20" Wide 32992 32993-NLA 32994 32995 32996 32997 32998 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 22" Wide N/A N/A 32999 33000 3300 33002 33003 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 24" Wide N/A N/A 33004-NLA 33005-NLA 33006-NLA 33007-NLA 33008-NLA See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A NOTE: A - Cushion Foam is not available separately. 64

Seat Cushion Assembly Contoura Seating #2 Contoura Seat Cushion Cover Before 2/6/0 Chair Width 6" Deep 7" Deep 8" Deep 9" Deep 20" Deep 2" Deep 22" Deep 6" Wide 32953-NLA 32954-NLA 32955-NLA 32956-NLA 32957-NLA N/A N/A 8" Wide 32958-NLA 32959-NLA 32960-NLA 3296-NLA 32962-NLA N/A N/A 20" Wide 32963-NLA 32964-NLA 32965-NLA 32966-NLA 32967-NLA 32968-NLA 32969-NLA 22" Wide N/A N/A 32970-NLA 3297-NLA 32972-NLA 32973-NLA 32974-NLA 24" Wide N/A N/A 32975-NLA 32976-NLA 32977-NLA 32978-NLA 32979-NLA Contoura Seat Cushion Covers listed on this chart are No Longer Available. Refer to the Contoura Seat Cushion Covers dated after 2/5/0 as a direct replacement. 65

Seat Cushion Assembly Contoura Seating #2 Contoura Seat Cushion Cover After 2/5/0 Chair Width 6" Deep 7" Deep 8" Deep 9" Deep 20" Deep 2" Deep 22" Deep 6" Wide 67372 67373-NLA 67374 67375 67376 N/A N/A 8" Wide 67377 67378-NLA 67379 67380 6738 N/A N/A 20" Wide 67382 67383-NLA 67384 67385 67386 67387 67388 22" Wide N/A N/A 67389 67390 6739 67392 67393 24" Wide N/A N/A 67394-NLA 67395-NLA 67396 67397-NLA 67398-NLA #2 Contoura Seat Cushion Cover, Mesh (CTBMSH) Chair Width 6" Deep 7" Deep 8" Deep 9" Deep 20" Deep 2" Deep 22" Deep 6" Wide 64208 64209 6420 642 6422 N/A N/A 8" Wide 6423 6424 6425 6426 6427 N/A N/A 20" Wide 6428 6429 64220 6422 64222 64223 64224 22" Wide N/A N/A 64225 64226 64227 64228 64229 24" Wide N/A N/A 64230 6423 64232 64233 64234 66

Back Upholstery, Nylon Elevate Only For ASBA/ADJASBA Seating Single Liners Width 6" W 7" W 8" W 6"-7" High 04575 04576 04577 8"-9" High 045207 045208 045209 20" High 068947 068948 068949 2"-22" High 04559 04560 0456 23"-24" High 054529 054530 05453 67

Back Upholstery, Nylon Elevate Only For ASBA/ADJASBA Seating Dual Liners Width 6"-7" High 8" - 9" High 20" High 2" - 22" High 6" W 04580 04522 068952 04564 7" W 0458 04523 068953 04565 8" W 04582 04524 068954 04566 9" W 04583 04525 068955 04567 20" W 04584 04526 068956 04568 2" W 04585 04527 068957 04569 22" W 04586 04528 068958 04570 NOTE: Dual liner back upholstery is used with chairs that have a seat deeper than 7" or back wider than 8". 23" - 24" High 054534 054535 054536 054537 054538 054539 054540 Item Number Note Part Number Description NOTE: A A A A - Not Shown Back Upholstery Hardware Quantity Per Package Assembly See Chart Single Liners See Chart Dual Liners - Nylon 026298 Package, Screw with Washer (#0 x 7/8") (Pair) 2 68

Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Back Assembly without Hardware 6"-20" Wide See Chart # Back Assembly without Hardware 2"-24" Wide 2 See Chart #2 Back Pan with Vinyl Edge Trim 6"-20" Wide 2 See Chart #2 Back Pan with Vinyl Edge Trim 2"-24" Wide 3 See Chart #3 Back Cushion Assembly 6"-20" Wide 3 See Chart #3 Back Cushion Assembly 2"-24" Wide 4 A 25723 Kit, Hook Fastener w/ Adhesive Back 5 25724-NLA NLA - Trim, Edge, Cut-To-Length, Vinyl Black (96" L) NOTE: A - Hook Fastener Adhesive kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan or Back Assembly is requested. # Back Assembly without Hardware 6"-20" Wide Overall Back Height 20" 2" 22" 23" 24" 25" 26" Material Back Height 5" 6" 7" 8" 9" 20" 2" 6" Wide 7" Wide 8" Wide 9" Wide 25564 25565 25566 25567 25573 25574 25575 25576 25582 25583 25584 25585 2559 25592 25593 25594 25600 2560 25602 25603 25609 2560 256 2562 2568 2569 25620 2562 20" Wide 25568 25577 25586 25595 25604 2563 25622 # Back Assembly without Hardware 2"-24" Wide Overall Back Height 20" 2" 22" Material Back Height 5" 6" 7" 2" Wide 22" Wide 23" Wide 24" Wide 25569 25570 2557 25572 25578 25579 25580 2558 25587 25588 25589-NLA 25590-NLA 70

Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #2 Back Pan with Vinyl Edge Trim 6"-20" Wide Overall Back Height 20" 2" 22" 23" 24" 25" 26" Material Back Height 5" 6" 7" 8" 9" 20" 2" 6" Wide 7" Wide 8" Wide 9" Wide 24578 24585 24592 24599 24579 24586 24593 24600 24580 24587 24594 2460 2458 24588 24595 24602 24582 24589 24596 24603 24583 24590 24597 24604 24584 2459 24598 24605 20" Wide 24606 24607 24608 24609 2460 246 2462 #2 Back Pan with Vinyl Edge Trim 2"-24" Wide Overall Back Height Material Back Height 20" 5" 2" 6" 22" 7" 23" 8" 24" 9" 25" 20" 26" 2" Hook Adhesive is not included with the Back Pan 2" Wide 22" Wide 23" Wide 24" Wide 2463 24620 24627 24634 2464 2462 24628 24635 2465 24622 24629 24636 2466 24623 24630 24637 2467 24624 2463 24638 2468 24625 24632 24639 2469 24626 24633-NLA 24640 72

Conventional Back without Mounting Hardware NOTE: Extruded back canes come in one back height only. Back cane material height for extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 22-/2". Only the Back Assembly needs to be replaced when changing back heights. NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener Adhesive on the Back Cover to attach properly. #3 Back Cushion Assembly 6"-20" Wide Overall Back Height Material Back Height 6" Wide 7" Wide 8" Wide 9" Wide 20" Wide 20" 5" 097397 097398 097399 097400 09740 2" 6" 097404 097405 097406 097407 097408 22" 7" 0974 09742 09743 09744 09745 23" 8" 09748 09749 097420 09742 097422 24" 9" 097425 097426 097427 097428 097429 25" 20" 097432 097433 097434 097435 097436 26" 2" 097439 097440 09744 097442 097443 Back cover and foam are sold as a back cushion assembly only. Chart reflects chair width and the actual back cushion width will be " wider than the chair width. #3 Back Cushion Assembly 2"-24" Wide Overall Back Height Material Back Height 2" Wide 22" Wide 23" Wide 24" Wide 20" 5" 097402 25543 25544 25545 2" 6" 097409 25546 25547 25548 22" 7" 09746 25549 25550 2555 23" 8" 097423 25552 25553 25554 24" 9" 097430 25555 25556 25557 25" 20" 097437 25558 25559 25560 26" 2" 097444 2556 25562-NLA 25563 Back cover and foam are sold as a back cushion assembly only. Chart reflects chair width and the actual back cushion width will be " wider than the chair width. 73

Contoura Back without Mounting Hardware - Before 5/5/09 NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Contoura Backs for ADJASBA Seating do not use the 24" wide selection # Back Assembly without Hardware 6", 8", 20", 22", 24" Wide Overall Back Height Material Back Height 6" Wide 8" Wide 20" Wide 22" Wide 24" Wide 25" 20" 32828-NLA 32829-NLA 32830-NLA 3283-NLA 32832-NLA 29" 24" 32825-NLA 24733-NLA 24734-NLA 32826-NLA 32827-NLA NOTE: When changing seat width on any system that has Recline and Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. #2 Back Pan with Vinyl Edge Trim 6", 8", 20", 22", 24" Wide Overall Back Height Material Back Height 6" Wide 8" Wide 20" Wide 22" Wide 25" 20" 3405-NLA 3406-NLA 3407-NLA 3408-NLA See Note(s) A 29" 24" 340-NLA 22454-NLA 22453-NLA 34-NLA NOTE: A - Item is No Longer Available. Back Assembly, part # 3283 must be purchased for replacement. 24" Wide 3409-NLA 342-NLA #3 Back Cushion Assembly 6", 8", 20", 22", 24" Wide NOTE: Overall Back Height 25" 29" Material Back Height 20" 24" 6" Wide 8" Wide 20" Wide 22" Wide 32820-NLA 3287-NLA 3282-NLA 2564-NLA 32822-NLA 25642-NLA 32823-NLA 3288-NLA A - Item is No Longer Available. Back Assembly, part # 32827 must be purchased for replacement. B - Item is No Longer Available. Back Assembly, part # 32832 must be purchased for replacement. 24" Wide 32824-NLA See Note(s) B 3289-NLA See Note(s) A 77

Curve Contoura Back w/o Mounting Hardware - After 5/4/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. Item Number Note Part Number Description Quantity Per Package Assembly A See Chart # Curved Contoura Back Kit A See Chart # Mesh Curved Contoura Back Kit (CTBMSH) 3 B See Chart #3 Curve Contoura Back Cushion Assembly 3 B See Chart #3 Mesh Curve Contoura Back Cushion Assembly (CTBMSH) 6 C 665 Kit, Lateral Support, Contoura Back (22" H) (Pair) Screw, Socket, Button (/4-20 x 3/8") 4 Support, Lateral (22" H) 2 6 C 6330-NLA NLA - Kit, Lateral Support, Contoura Back (25" H) (Pair) 7 Screw, Socket, Button (/4-20 x 3/8") 4 8 Support, Lateral (25" H) 2 6 C 633-NLA NLA - Kit, Lateral Support, Contoura Back (28" H) (Pair) 7 Screw, Socket, Button (/4-20 x 3/8") 4 8 Support, Lateral (28" H) 2 9 08440-NLA NLA - Support, Lumbar - Large NOTE: A - Includes Items 2 thru 9. B - Includes Items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. C - Included Items 7 and 8. Item #2 is a non-saleable part. Refer to item # Kit when ordering. # Curved Contoura Back Kit Overall Back Height 22" High 25" High 28" High Material Back Height 7" High 20" High 23" High 6" Wide 8" Wide 20" Wide 22" Wide 24" Wide 65846 65847 65848 65849 65850 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 6480 6482 6484 6486 6488 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 648 6483 6485 6487 6489 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 80

Curve Contoura Back w/o Mounting Hardware - After 5/4/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing NOTE: A - Includes items 2-9 back heights. NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan # Mesh Curved Contoura Back Kit (CTBMSH) NOTE: Overall Back Height 22" High 25" High 28" High Material Back Height 7" High 20" High 23" High A - Includes items 2-9 6" Wide 8" Wide 20" Wide 22" Wide 65837 65842 65843 65844 24" Wide 65845 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 64235 64237 64239 6424 64243 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A 64236 64238 64240 64242 64244 See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. 8

Curve Contoura Back w/o Mounting Hardware - After 5/4/09 NOTE: When changing seat width on any system that has Recline and Curve Contoura Seating (Tilt/Recline, Tilt/Recline/Elevate or Recline Only) you must First look up special quote # C-00628042246 for directions on how to order the Back and all additional components that may be required for changing seat width through the Equipment Configurator. NOTE: Extruded back canes come in one back height only. Back cane material height for the contoura extruded back canes measure approximately 20-/2". Overall back height from the seat pan to top of the extruded back cane is approximately 23". Only the Back Assembly needs to be replaced when changing back heights. #3 Curve Contoura Back Cushion Assembly Overall Back Height 22" High 25" High Material Back Height 7" High 20" High 6" Wide 8" Wide 20" Wide 22" Wide 6646 6647 6648 6649 24" Wide 6650 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 63248-NLA 63250 63252 63254 63256 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 63249-NLA 6325 63253 63255 63257-NLA 28" High 23" High See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B NOTE: B - Includes items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan #3 Mesh Curve Contoura Back Cushion Assembly (CTBMSH) Dimensions 6" Wide 8" Wide 20" Wide 22" Wide 24" Wide 22" High 664 6642 6643 6644 6645 See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 25" High 7642-NLA 7644-NLA 7646-NLA 7648-NLA 7650-NLA See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B 28" High 7643-NLA 7645-NLA 7647-NLA 7649-NLA 765-NLA See Note(s) B See Note(s) B See Note(s) B See Note(s) B See Note(s) B NOTE: B - Includes items 4 and 5. Back Cover and Foam are sold as a Back Cushion Assembly only. Overall Back Height includes the spacing gap dimension from the bottom of the Back Assembly to the Seat Pan 82

Back Mounting Hardware Conventional Tilt - Before 5/5/09 83

Item Number Note Part Number Description Back Mounting Hardware Conventional Tilt - Before 5/5/09 Quantity Per Package Assembly A 25757 Kit, Back Mounting Hardware For Conventional Tilt 2 Locknut (/4-20) 4 3 Washer (/4 x 23/32 x /6") 8 4 Spacer, Coved (/4 x 7/8 x 7/6") 4 5 Spacer (/4 x 5/8 x 3/8") 4 6 Screw, Socket Button Head (/4-20 x 2") 4 NOTE: A - Includes items 2-6 84

Back Mounting Hardware Conventional Recline and Tilt/Recline - Before 5/5/09 85

Back Mounting Hardware Conventional Recline and Tilt/Recline - Before 5/5/09 Item Number Note Part Number Description Quantity Per Package Assembly A 25756 Kit, Back Mounting Hardware For Conventional Recline and Tilt/Recline 2 T-Nut (/4-20) 8 3 Locknut (/4-20) 4 4 NLA - Bracket, Angled Back, Black 4 5 Washer (/4 x /2 x /6") 8 6 Screw, Hex Head w/ Patch (/4-20 x /2") 8 7 Washer (/4 x 23/32 x /6") 4 8 Screw, Socket Button (/4-20 x 3/4") 4 NOTE: A - Includes items 2-8 86

Back Mounting Hardware Contoura Tilt - Before 5/5/09 87

Item Number Note Part Number Description Back Mounting Hardware Contoura Tilt - Before 5/5/09 Quantity Per Package Assembly A 25755 NLA - Kit, Back Mounting Hardware For Contoura Tilt 2 T-Nut (/4-20) 6 3 Locknut (/4-20) 4 4 Washer (/4 x /2 x /6") 6 5 NLA - Bracket, Back Mounting, Black 4 6 Screw, Hex Head w/ Patch (/4-20 x /2") 6 7 Washer (/4 x 23/32 x /6") 4 8 Screw, Socket Button (/4-20 x 3/4") 4 9 NLA - Bracket, Contoura Shear Lock Out, Black 2 NOTE: A - Includes items 2-9 88

Contoura Back Mounting Hardware ADJASBA Only - Before 5/5/09 89

Contoura Back Mounting Hardware ADJASBA Only - Before 5/5/09 Item Number Note Part Number Description Quantity Per Package Assembly A 40945 Kit, Contoura Back Mounting Hdwr. - Round Canes 2 Bracket, Back Mounting, Front, Black 4 3 Screw, Phillips Oval Head (#0-6 x 7/8") 2 4 Screw, Socket Button (/4-20 x 3/4") 8 5 Washer (/4 x 23/32 x /6") 8 6 Locknut (/4-20) 8 7 Bracket, Back Mounting, Rear, Black 4 NOTE: A - Includes items 2-7 90

Back Mounting Hardware Contoura Recline and Tilt/Recline - Before 5/5/09 9

Back Mounting Hardware Contoura Recline and Tilt/Recline - Before 5/5/09 Item Number Note Part Number Description Quantity Per Package Assembly A 25754 Kit, Back Mounting Hardware For Contoura Recline and Tilt/Recline 2 T-Nut (/4-20) 4 3 NLA - Bracket, Back Mounting, Black 2 4 Washer (/4 x /2 x /6") 4 5 Screw, Hex Head w/ Patch (/4-20 x /2") 4 6 Locknut (/4-20) 6 7 Washer (/4 x 23/32 x /6") 6 8 Screw, Socket Button (/4-20 x 3/4") 6 NOTE: A - Includes items 2-8 92

Curve Contoura Mounting Back Hardware - After 5/4/09 93

Curve Contoura Mounting Back Hardware - After 5/4/09 Item Number Note Part Number Description Quantity Per Package Assembly A 57925 Kit, Metal Curved and Curve Contoura Back Mounting Hardware 2 Spacer, Back Pan, Black 4 3 Hook, Back Assembly Mounting 4 4 Screw, Socket Button Head (/4-20 x ") 4 5 Washer (/4 x 23/32 x /6") 8 6 Screw, Phillips Oval Head (#0-6 x 7/8") 2 7 Locknut (/4-20) 4 NOTE: A - Includes Items 2 thru 7. 94

Prop Rod Assembly Contoura Tilt 95

Item Number Note Part Number Description Prop Rod Assembly Contoura Tilt Quantity Per Package Assembly A,B,C 25764-NLA NLA - Kit, Prop Rod Assembly Contoura Tilt 2 Screw, Shoulder Hex Socket (3/8 x 2", 5/6-8) 3 Washer, Flat (5/6 x 5/8 x /6") 4 Locknut (5/6-8) 2 5 NLA - Kit, Top Prop Rod with Bushings 6 NLA - Tube, Middle Prop Rod, Black 7 NLA - Kit, Bottom Prop Rod Tube with Bushings 8 Screw, Socket Head w/ Patch (3/8-6 x -/2") 2 9 Locknut, Low Profile (3/8-6) 2 0 Screw, Shoulder Hex Socket Head (3/8 x -3/4", 5/6-8) NLA - Bushing, Actuator Motor (3/8 x 3/4 x 5/32") 2 2 Spacer (3/8 x x /2") NOTE: A - Includes items 2-2 B - When a vent tray is present, item located on the top side of the prop rod is replaced with item 2 C - Relocation of holes were made 7/5/05 for items 5, 6 and 7. Item must be ordered for chairs manufactured before 7/5/05. 96

Back Recline Shear Link Assemblies 97

Back Recline Shear Link Assemblies Item Number Note Part Number Description Quantity Per Package Assembly A 25758 Kit, Recline Shear Link Assembly Conventional (Pair) 2 Screw, Hex Head w/ Patch (/4-20 x 5/8") 4 3 Washer (/4 x /2 x /6") 4 4 Plate, Shear Adapter 2 5 T-Nut (/4-20) 4 6 Locknut, Low Profile (3/8-6) 4 7 Washer, Flat (3/8 x /6 x /6") 4 8 Link, Recline Shear, Black - Right 8 Link, Recline Shear, Black - Left 9 Stand-Off, Recline Shear Link 4 0 B 68997 Kit, Recline Shear Link Assembly, Contoura/Curve Contoura (Pair) Screw, Hex Head w/ Patch (/4-20 x 5/8") 4 2 Washer (/4 x /2 x /6") 4 3 T-Nut (/4-20) 4 4 Locknut, Low Profile (3/8-6) 4 5 Washer, Flat (3/8 x /6 x /6") 4 6 Link, Recline Shear, Black - Right 6 Link, Recline Shear, Black - Left 7 Stand-Off, Recline Shear Link 4 8 C 343-NLA NLA - Adapter, Recline Shear Contoura (6" W) 2 8 C 22580-NLA NLA - Adapter, Recline Shear Contoura (8" W) 2 8 C 22623 Adapter, Recline Shear Contoura (20" W) 2 8 C 344-NLA NLA - Adapter, Recline Shear Contoura (22" W) 2 8 C 345-NLA NLA - Adapter, Recline Shear Contoura (24" W) 2 8 D 6800 Adapter, Recline Shear, Curve Contoura (6" W) 2 8 D 6653 Adapter, Recline Shear, Curve Contoura (8" W) 2 8 D 6658 Adapter, Recline Shear, Curve Contoura (20" W) 2 8 D 6959 Adapter, Recline Shear, Curve Contoura (22" W) 2 8 D 6823 Adapter, Recline Shear, Curve Contoura (24" W) 2 NOTE: A - Includes items 2-9. The Recline Shear Link and Recline Shear Link Stand-Off were revised as of 6/28/0. The Shear Link is now made of thicker material and the Stand-Off is thinner. The kit is backward compatible to all chairs in the field. B - Includes items -7. The Recline Shear Link and Recline Shear Link Stand-Off were revised as of 6/28/0. The Shear Link is now made of thicker material and the Stand-Off is thinner. The kit is backward compatible to all chairs in the field. C - Not used for Curve Contoura. For use on Contoura only. D - Not used for Contoura. For use on Curve Contoura only. 98

Back Canes, Spreader Bars and Attaching Hardware Elevate Only For ASBA Seating (Before 7/5/05) NOTE: Chairs manufactured with a seat width, seat depth or back height of 20" and greater including all heavy duty packages will be equipped with a spreader bar standard. Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Back Cane Assemblies -- -- 2 See Chart #2 Spreader Bar 3 35506 Package, Foam Hand Grip (9" L) 0 4 34426 Package, Plug Button, Black (3/4") 0 5 A 070457-NLA NLA - Kit, Back Cane Attaching Hardware 2 6 Locknut (5/6-24) 2 7 Screw w/ Lug (5/6-24 x -3/8") 2 8 Insert, Non-Threaded Back Cane 2 (For Back Heights 20" and Lower) 9 Screw, Hex Head (/4-20 x -5/8") 4 0 Washer (/4 x 23/32 x /6") 4 Locknut (/4-20) 4 2 Spacer, Coved (/4 x /6 x /2") 4 5 B 070458-NLA NLA - Kit, Back Cane Attaching Hardware 2 6 Locknut (5/6-24) 2 7 Screw w/ Lug (5/6-24 x -3/8") 2 8 NLA - Insert, Non-Threaded Back Cane 2 (For Back Heights 2" and Higher) 9 Screw, Hex Head (/4-20 x -5/8") 4 0 Washer (/4 x 23/32 x /6") 4 Locknut (/4-20) 4 2 Spacer, Coved (/4 x /6 x /2") 4 NOTE: A - Includes items 6-2 and used for 6"-20" High Back canes B - Includes items 6-2 and used for 2"-24" High Back canes 00

Back Canes and Spreader Bars For ADJASBA Seat (6"-22" Wide) After 7/4/05 Contoura, Curve Contoura, Conventional Backs 6"-22" Wide for ADJASBA Seating do not utilize a Spreader Bar Assembly. 02

Back Canes and Spreader Bars For ADJASBA Seat (6"-22" Wide) After 7/4/05 Contoura, Curve Contoura, Conventional Backs 6"-22" Wide for ADJASBA Seating do not utilize a Spreader Bar Assembly. Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Back Cane Assemblies 2 35506 Package, Foam Hand Grip (9" L) 0 3 34426 Package, Plug Button, Black (3/4") 0 4 A 25709 Kit, Spreader Bar Assembly (6"-20" Wide) 5 NLA - Handle, Spreader Bar, Black 2 6 Screw, Hex Head (/4-20 x -/2") 2 7 Spacer, Coved (/4 x /6 x /2") 4 8 Anti-Rattle (") 2 9 Tube, Spreader Bar, Adjustable, Black (6-20" W) 0 Locknut (/4-20) 2 4 A 2570 Kit, Spreader Bar Assembly 20"-24" Wide 5 NLA - Handle, Spreader Bar, Black 2 6 Screw, Hex Head (/4-20 x -/2") 2 7 Spacer, Coved (/4 x /6 x /2") 4 8 Anti-Rattle (") 2 9 Tube, Spreader Bar, Adjustable, Black (20-24" W) 0 Locknut (/4-20) 2 025730 Locknut (5/6-24) 2 2 03026 Screw w/ Lug (5/6-24 x -3/8") 2 NOTE: A - Includes items 5-0 # Back Cane Assemblies Back Height 6" 7" 8" 9" 20" 2" 22" 23" Back Cane- No Push Handle 0 Deg. Bend Right 34066 34068 34070 34072 34074 34076 34078 34080 Back Cane- No Push Handle 0 Deg. Bend Left 34067 34069 3407 34073 34075 34077 34079 3408 Back Cane- Push Handle Straight Right 33793 33795 43334 See Note(s) B 33799 3380 See Note(s) C 360 See Note(s) A 3603 See Note(s) A 3605 See Note(s) A Back Cane- Push Handle Straight Left 33794 33796 43335 See Note(s) B 33800 33802 See Note(s) C 3602 See Note(s) A 3604 See Note(s) A 3606 See Note(s) A Back Cane- Push Handle 0 Deg. Bend Right 33822 33824 33826 33828 33830 33832 33834 33837 Back Cane- Push Handle 0 Deg. Bend Left 33823 33825 33827 33829 3383 33833 33835 33838 03

Back Canes and Spreader Bars For ADJASBA Seat (6"-22" Wide) After 7/4/05 Contoura, Curve Contoura, Conventional Backs 6"-22" Wide for ADJASBA Seating do not utilize a Spreader Bar Assembly. # Back Cane Assemblies Back Height Back Cane- No Push Handle 0 Deg. Bend Right Back Cane- No Push Handle 0 Deg. Bend Left Back Cane- Push Handle Straight Right Back Cane- Push Handle Straight Left Back Cane- Push Handle 0 Deg. Bend Right Back Cane- Push Handle 0 Deg. Bend Left 3607 3608 24" 34082 34083 33839 33840 See Note(s) A See Note(s) A NOTE: A - 2"-24" High Straight Back Canes with Push Handles are only offered On-Chair when the Back Upholstery is omitted B - Wheelchairs manufactured before 5/5/09 with a Contoura Back 25" or 29" high and wheelchairs manufactured after 5/4/09 with a Curve Contoura Back 22" high will use the 8" high Straight Back Cane w/ Push Handle. C - Wheelchairs manufactured after 5/4/09 with a Curve Contoura Back 25" or 28" high will use the 20" high Straight Cane w/ Push Handle. NOTE: Back Cane Assemblies include Foam Grips and Plug Buttons where shown 04

Back Cane Attaching Hardware For ADJASBA Seat (6"-22" Wide) After 7/4/05 05

Back Cane Attaching Hardware For ADJASBA Seat (6"-22" Wide) After 7/4/05 Item Number Note Part Number Description Quantity Per Package Assembly A 33755 Kit, Back Cane Mounting Hardware (Pair) 2 2 Screw, Hex Head (5/6-8 x ") 4 3 Washer, Flat (2/64 x 53/64 x 7/64") 4 4 Locknut (5/6-8) 4 5 Locknut (5/6-24) 2 6 Screw w/ Lug (5/6-24 x -3/8") 2 NOTE: A - Includes items 2-6 06

Solid Straight Back Canes w/o Push Handles and Mounting Hardware Conventional Tilt and Tilt w/ BPO Option 07

Solid Straight Back Canes w/o Push Handles and Mounting Hardware Conventional Tilt and Tilt w/ BPO Option Item Number Note Part Number Description Quantity Per Package Assembly A,B 28394-NLA NLA - Kit, Back Cane w/o Push Handle, Solid Straight w/ Plug Button - Right A,B 28395-NLA NLA - Kit, Back Cane w/o Push Handle, Solid Straight w/ Plug Button - Left A 28396-NLA NLA - Kit, Back Canes w/o Push Handle, Solid Straight w/ Plug Button (Pair) 2 027097 Plug Button, Black (3/4") 3 C 25733 Kit, Solid Straight Back Cane w/o Push Handle, Mounting Hardware 4 Washer, Flat (2/64 x 53/64 x 7/64") 2 5 Screw, Hex Head (5/6-8 x ") 2 6 Locknut (5/6-8) 2 4 079247 Washer, Flat (2/64 x 53/64 x 7/64") 2 5 028478-NLA NLA - Screw, Hex Head (5/6-8 x -/4") 2 6 02658 Locknut (5/6-8) 2 NOTE: A - Back height from the seat pan to the top of the back cane will measure approximately 20-/2" high. B - After 4/3/05 ALL Solid Straight Back Canes have a hole bored out to accommodate a Push Handle Attachment Option. For chairs manufactured before 4/4/05 it is recommended to order back canes in pairs to match. C - Includes items 4-6 08

Back Canes, Slide Blocks and Sleeves For Conventional Recline, BPO Recline & Tilt/Recline Extruded Back Cane material comes in one height only and measures approximately 20-/2" and the overall back height from the seat pan to the top of the extruded cane measures approximately 22-/2" high. Only the Back Assembly needs to be replaced when changing back heights. Item Number Note Part Number Description 2 3 4 5 6 7 8 Quantity Per Package Assembly 22263 Block, Slide Back - Left 24693 Block, Slide Back - Right 00022 Screw, Shoulder Hex Socket (/4 x -/4", #0-24) 2 22464 Sleeve, Back Slide (5-/4" L) 2 9847 Pin, Roll (/8 x ") 2 22560 Cane, Back, Extruded Conventional, Black - 2 Right/Left 062604 Screw, Shoulder Hex Socket (3/8 x -/4", 5/6-8) 2 025704 Washer, Flat (5/6 x 5/8 x /6") 2 02658 Locknut (5/6-8) 2 0

Back Frame, Slide Blocks and Sleeves For Contoura Seating Back Cane material height measures approximately 20-/2" and the overall back height from the seat pan to the top of the extruded cane measures approximately 23" high. Only the Back Assembly needs to be replaced when changing back heights. Item Number Note Part Number Description 2 3 4 5 5 5 5 5 6 7 8 Quantity Per Package Assembly 22263 Block, Slide Back - Left 24693 Block, Slide Back - Right 00022 Screw, Shoulder Hex Socket (/4 x -/4", #0-24) 2 22464 Sleeve, Back Slide (5-/4" L) 2 9847 Pin, Roll (/8 x ") 2 3422 Frame, Back, Contoura, Black (6" W) 22459 Frame, Back, Contoura, Black (8" W) 22463 Frame, Back, Contoura, Black (20" W) 3423 Frame, Back, Contoura, Black (22" W) 3424 Frame, Back, Contoura, Black (24" W) 062604 Screw, Shoulder Hex Socket (3/8 x -/4", 5/6-8) 2 025704 Washer, Flat (5/6 x 5/8 x /6") 2 02658 Locknut (5/6-8) 2 2

Spreader Bar Assembly, Double For Conventional Tilt w/ Vent and Tilt w/ BPO Option 3

Spreader Bar Assembly, Double For Conventional Tilt w/ Vent and Tilt w/ BPO Option Item Number Note Part Number Description 2 3 4 5 Quantity Per Package Assembly 003602 Bar, Push, Black (6" W) 003702 Bar, Push, Black (7" W) 003802 Bar, Push, Black (8" W) 003902 Bar, Push, Black (9" W) 004002 Bar, Push, Black (20" W) 00402 Bar, Push, Black (2" W) 004202 Bar, Push, Black (22" W) 0284202-NLA NLA - Bar, Push, Black (23" W) 0284302-NLA NLA - Bar, Push, Black (24" W) 2576 Kit, Double Spreader Bar Mounting Hardware Screw, Socket Head (/4-20 x 5/8") 6 Half Clamp, Threaded Holes 2 (7/8" Dia. Back Canes) Half Clamp, Un-Threaded Holes 2 (7/8" Dia. Back Canes) 4

Spreader Bar Assembly Conventional Tilt without Vent 5

Item Number Note Part Number Description Spreader Bar Assembly Conventional Tilt without Vent Quantity Per Package Assembly A 25709 Kit, Spreader Bar Assembly (6"-20" Wide) 2 NLA - Handle, Spreader Bar, Black 2 3 Screw, Hex Head (/4-20 x -/2") 2 4 Spacer, Coved (/4 x /6 x /2") 4 5 Anti-Rattle (") 2 6 Tube, Spreader Bar, Adjustable, Black (6-20" W) 7 Locknut (/4-20) 2 A 2570 Kit, Spreader Bar Assembly 20"-24" Wide 2 NLA - Handle, Spreader Bar, Black 2 3 Screw, Hex Head (/4-20 x -/2") 2 4 Spacer, Coved (/4 x /6 x /2") 4 5 Anti-Rattle (") 2 6 Tube, Spreader Bar, Adjustable, Black (20-24" W) 7 Locknut (/4-20) 2 8 025730 Locknut (5/6-24) 2 9 03026 Screw w/ Lug (5/6-24 x -3/8") 2 NOTE: A - Includes items 2-7 6

Spreader Bar Assembly Contoura Tilt, Recline and Tilt/Recline 7

Item Number Note Part Number Description Spreader Bar Assembly Contoura Tilt, Recline and Tilt/Recline Quantity Per Package Assembly 22469-NLA NLA - Spreader Bar Assembly, Contoura w/o Vent 25788-NLA NLA - Spreader Bar Assembly, Contoura w/ Vent 2 A 25765 Kit, Spreader Bar Mounting Hardware For Extruded Back Canes 3 Screw, Hex Head w/ Patch (/4-20 x /2") 8 4 Washer (/4 x /2 x /6") 8 5 T-Nut (/4-20) 8 NOTE: A - Includes items 3-5 8

Spreader Bar Assembly Conventional Recline and Tilt/Recline 9

Item Number Note Part Number Description A 2 3 4 5 B 6 7 8 9 0 0 5 B 6 7 8 9 0 0 5 B 6 7 8 9 0 0 5 B 6 7 Spreader Bar Assembly Conventional Recline and Tilt/Recline Quantity Per Package Assembly 25765 Kit, Spreader Bar Mounting Hardware For Extruded Back Canes Screw, Hex Head w/ Patch (/4-20 x /2") 8 Washer (/4 x /2 x /6") 8 T-Nut (/4-20) 8 25766-NLA NLA - Kit, Spreader Bar Assembly For Conventional Recline, T/R, 6"-20" Wide w/o Vent NLA - Center Spreader Bar Assembly w/o Vent (6-20" W) Screw, Socket Head (5/6-8 x -/2") 4 Washer, Flat (5/6 x 5/8 x /6") 4 Locknut (5/6-8) 4 NLA - Bracket, Straight Outer Spreader Bar - Right For 6"-20" Wide NLA - Bracket, Straight Outer Spreader Bar, Black - Left (6-20" W) 25767-NLA Kit, Spreader Bar Assembly For Conventional Recline, T/R, 6"-20" Wide w/ Vent NLA - Center Spreader Bar Assembly w/ Vent (6-20" W) Screw, Socket Head (5/6-8 x -/2") 4 Washer, Flat (5/6 x 5/8 x /6") 4 Locknut (5/6-8) 4 NLA - Bracket, Straight Outer Spreader Bar - Right For 6"-20" Wide NLA - Bracket, Straight Outer Spreader Bar, Black - Left (6-20" W) 25768 NLA - Kit, Spreader Bar Assembly For Conventional Recline, T/R, 20"-24" Wide w/o Vent NLA - Center Spreader Bar Assembly w/o Vent (20-24" W) Screw, Socket Head (5/6-8 x -/2") 4 Washer, Flat (5/6 x 5/8 x /6") 4 Locknut (5/6-8) 4 NLA - Bracket, Straight Outer Spreader Bar, Black - Right (20-24" W) NLA - Bracket, Straight Outer Spreader Bar, Black - Left (20-24" W) 25769-NLA Kit, Spreader Bar Assembly For Conventional Recline, T/R, 20"-24" Wide w/ Vent NLA - Center Spreader Bar Assembly w/ Vent (20-24" W) Screw, Socket Head (5/6-8 x -/2") 4 20

Item Number Note Part Number Description 8 9 0 0 NOTE: A - Includes items 2-4 B - Includes items 6-0 Spreader Bar Assembly Conventional Recline and Tilt/Recline Quantity Per Package Assembly Washer, Flat (5/6 x 5/8 x /6") 4 Locknut (5/6-8) 4 NLA - Bracket, Straight Outer Spreader Bar, Black - Right (20-24" W) NLA - Bracket, Straight Outer Spreader Bar, Black - Left (20-24" W) 2

Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating 22

Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating # Arms Less Pad 6-9" Deep Seat Frames Arm Style Right Left Desk Length 068566-NLA 068567-NLA Full Length 068559-NLA 068560-NLA # Arms Less Pad 20" and Deeper Seat Frames Arm Style Right Left Desk Length 068540-NLA 06854-NLA Full Length 068528-NLA 068529-NLA 23

Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note Part Number Description A 2 C 2 2 C 2 2 B 2 B 2 B 2 B 2 B 2 B 3 3 3 A 3 A 3 3 3 A 3 A 4 5 6 6 6 A 7 Quantity Per Package Assembly See Chart Arms Less Pad, 6-9" Deep Seat Frames See Chart Arms Less Pad, 20" and Deeper Seat Frames 7328 Kit, Arm Pad w/ Screws, Full Length, Urethane Waterfall, Black (3" L x 2-5/8" W) 088 Kit, Arm Pad w/ Screws, Full Length, Urethane 2 Waterfall, Black (3" L x 2-5/8" W) (Pair) 7327 Kit, Arm Pad w/ Screws, Desk Length, Urethane Waterfall, Black (9" L x 2-5/8" W) 087 Kit, Arm Pad w/ Screws, Desk Length, Urethane 2 Waterfall, Black (9" L x 2-5/8" W) (Pair) 08290 Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Right (3" L x 3" W) 0829 Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Left (3" L x 3" W) 09090 Kit, Arm Pad w/ Screws and Elbow Stop, Desk 2 Length, Urethane, Black (3" L x 3" W) (Pair) 08292 Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Right (7" L x 3" W) 08293 Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Left (7" L x 3" W) 0909 Kit, Arm Pad w/ Screws and Elbow Stop, Full 2 Length, Urethane, Black (7" L x 3" W) (Pair) 068564 Tube, Arm, Desk Length, Black - Right (6-9" D) 068565-NLA NLA - Tube, Arm, Desk Length, Black - Left (6-9" D) 06844-NLA NLA - Tube, Arm, Desk Length, Long, Black - Right (20" and Deeper) 06845-NLA NLA - Tube, Arm, Desk Length, Long, Black - Left (20" and Deeper) 068490 Tube, Arm, Full Length, Black - Right (6-9"D) 06849-NLA NLA - Tube, Arm, Full Length, Black - Left (6-9"D) 068473-NLA NLA - Tube, Arm, Full Length, Long, Black - Right (20" and Deeper) 068474-NLA NLA - Tube, Arm, Full Length, Long, Black - Left (20" and Deeper) 032244 Grip, Foam Hand (9" L) 025729 Screw, Phillips Pan Head Tap (#8-32 x 3/8") 4 035472-NLA NLA - Guard, Clothing, Desk Length 044572-NLA NLA - Guard, Clothing, Full Length (6-9" D) 044005-NLA NLA - Guard, Clothing, Full Length (20" and Deeper) 035065 Cover, Clothing Guard w/ Pocket, FXDESK & ADJFULL/ADJDESK 24

Fixed Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note Part Number Description Quantity Per Package Assembly 7 A 044588 Cover, Clothing Guard with Pocket Fixed Height Full Length (20" and Deeper) 8 094270 Package, Screw, Phillips Pan Head (#0-32 x 2 -/4") 9 065936 Plug, Pivot 2 0 067734 Plug Button, Black (5/8") 2 NOTE: A - The ADJASBA seat frame for 9-22" depths including the Tilt Only System must use the 6-9" deep arms only. B - Arm Pads w/ Elbow Stop is used for Formula Tilt Only systems C - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair 25

Adjustable Height Arms without Mounting Hardware Elevate Only or Tilt Seating 26

Adjustable Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note Part Number Description B B B B B B 2 2 3 4 5 6 7 8 9 0 2 3 3 3 A 3 A 3 3 Quantity Per Package Assembly 7328 Kit, Arm Pad w/ Screws, Full Length, Urethane Waterfall, Black (3" L x 2-5/8" W) 088 Kit, Arm Pad w/ Screws, Full Length, Urethane 2 Waterfall, Black (3" L x 2-5/8" W) (Pair) 7327 Kit, Arm Pad w/ Screws, Desk Length, Urethane Waterfall, Black (9" L x 2-5/8" W) 087 Kit, Arm Pad w/ Screws, Desk Length, Urethane 2 Waterfall, Black (9" L x 2-5/8" W) (Pair) 08290 Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Right (3" L x 3" W) 0829 Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Left (3" L x 3" W) 09090 Kit, Arm Pad w/ Screws and Elbow Stop, Desk 2 Length, Urethane, Black (3" L x 3" W) (Pair) 08292 Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Right (7" L x 3" W) 08293 Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Left (7" L x 3" W) 0909 Kit, Arm Pad w/ Screws and Elbow Stop, Full 2 Length, Urethane, Black (7" L x 3" W) (Pair) 07253 Arm Tube Assembly w/ Plug Buttons, Full Length, Black - Right/Left 070859 Arm Tube Assembly w/ Plug Buttons, Desk Length, Black - Right/Left 027095 Plug Button, Black (7/8") 2 094270 Package, Screw, Phillips Pan Head (#0-32 x 2 -/4") 06430 Guard, Clothing 4747X074 Spring, Arm Lock 028594 Pin, Arm Lock, Black 032244 Grip, Foam Hand (9" L) 090768 Kit, Lock Handle w/rivets (Pair) 2 028645 Rivet 6 065936 Plug, Pivot 2 067734 Plug Button, Black (5/8") 2 06846 Arm Base Assembly, Black - Right (6-9" D) 06847 Arm Base Assembly, Black - Left (6-9" D) 06848 Arm Base Assembly, Black - Right (20" and Deeper) 06849 Arm Base Assembly, Black - Left (20" and Deeper) 06776 Arm Base Assembly, " Lower, Black - Right (6-9" D) 067762 Arm Base Assembly, " Lower, Black - Left (6-9" D) 27

Adjustable Height Arms without Mounting Hardware Elevate Only or Tilt Seating Item Number Note Part Number Description Quantity Per Package Assembly 3 A 067755-NLA NLA - Arm Base Assembly, " Lower, Black - Right (20" and Deeper) 3 A 067756-NLA NLA - Arm Base Assembly, " Lower, Black - Left (20" and Deeper) 4 035065 Cover, Clothing Guard w/ Pocket, FXDESK & ADJFULL/ADJDESK NOTE: A - The ADJASBA seat frame for 9-22" depths including the Tilt Only System must use the 6-9" deep arms only. B - Arm Pads w/ Elbow Stop is used for Formula Tilt Only systems 28

Recline and Tilt/Recline Arms without Mounting Hardware 29

Recline and Tilt/Recline Arms without Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly 08290 Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Right (3" L x 3" W) 0829 Pad, Arm w/ Elbow Stop, Desk Length, Urethane, Black - Left (3" L x 3" W) 09090 Kit, Arm Pad w/ Screws and Elbow Stop, Desk 2 Length, Urethane, Black (3" L x 3" W) (Pair) 08292 Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Right (7" L x 3" W) 08293 Pad, Arm w/ Elbow Stop, Full Length, Urethane, Black - Left (7" L x 3" W) 0909 Kit, Arm Pad w/ Screws and Elbow Stop, Full 2 Length, Urethane, Black (7" L x 3" W) (Pair) 2 A,F 086992 Arm Assembly w/o Arm Pad, Desk Length, Black - Right 2 A,F 086993 Arm Assembly w/o Arm Pad, Desk Length, Black - Left 2 B,F 08702 Arm Assembly w/o Arm Pad, Full Length, Black - Right 2 B,F 08703 Arm Assembly w/o Arm Pad, Full Length, Black - Left 3 008432 Screw, Socket Button Head (/4-20 x -/4") 3 4 02603 Washer, Nylon (/4 x /2 x /32") 2 5 0028202 Tube, Extension, Full Length 6 027095 Plug Button, Black (7/8") 7 0755 Screw, Phillips Pan Head Tap (#0-32 x -/4") 2 8 C 028755 Screw, Phillips Pan Head (#0-32 x 5/8") 8 D 0755 Screw, Phillips Pan Head Tap (#0-32 x -/4") 9 079203 Decal, Warning Pinch Point 0 5392 Tube, Arm, Support, Black 5393-NLA NLA - Tube, Slide, Adjustable, Black 2 082842 Plug, Arm, Black 3 7930333 Locknut (/4-20) 25 3 4 082927 Tube, Arm, Black 5 09870 Screw, Socket Button Head w/ Patch (/4-20 x 3/4") 6 G 095437 Arm Pivot Assembly 7 65484-NLA NLA - Washer, Nylon (/4 x /2 x /32") 2 E 9268-NLA NLA - Kit, Slide Tube w/ Arm Support (Pair) 2 NOTE: A - Includes Items 3,4,6, and 9-7. B - Includes Items 3-6 and 8-7. C - Used for full length arms only D - Used for desk length arms only E - Not Shown. Assembly includes 2 ea. of item numbers 9, 0 and F - When placing an order for item 2, you must specify as a note "For Tarsys 2GTR seating" or "For Formula TRE seating". G - The Arm Pivot Assembly Pin faces down for Tarsys 2GTR and faces up for the Formula TRE powered seating 30

Arm Mounting Swingaway Hardware Elevate Only For ASBA/ADJASBA Seating 3

Arm Mounting Swingaway Hardware Elevate Only For ASBA/ADJASBA Seating Item Number Note Part Number Description Quantity Per Package Assembly A 068488 Kit, Swingaway Armrest Mounting Hardware 2 09590 Screw, Socket Button Head (/4-20 x -5/8") 3 068025 Clevis, Pivot 4 02595 Locknut (/4-20) 5 068039 Pin, Pull NOTE: A - Includes items 2-5 32

Front/Rear Arm Socket Assembly and Hardware Elevate Only For ADJASBA Seat (6"-22" Wide) (After 7/4/05) 33

Front/Rear Arm Socket Assembly and Hardware Elevate Only For ADJASBA Seat (6"-22" Wide) (After 7/4/05) Item Number Note Part Number Description Quantity Per Package Assembly A 25734 Kit, Front/Rear Arm Socket Assembly Mounting Hardware 2 Screw, Hex Head w/ Patch (5/6-8 x 3/4") 2 3 Washer, Steel (5/6 x 3/4 x /6") 4 4 T-Nut (5/6-8) 4 5 Screw, Hex Head w/ Patch (5/6-8 x 5/8") 2 6 2269 Socket, Arm, Front - Right 6 22620 Socket, Arm, Front - Left 7 25478 Bracket, Arm Socket/Cane, Rear - Right 7 25479 Bracket, Arm Socket/Cane, Rear - Left NOTE: A - Includes items 2-5 34

Arm Mounting Hardware Conventional and Contoura Recline and Tilt/Recline Seating 35

Arm Mounting Hardware Conventional and Contoura Recline and Tilt/Recline Seating # Adapter, Contoura Recline Upper Arm - Before 5/5/09 Adapter Side 6" Wide 8" Wide 20" Wide 22" Wide 24" Wide Contoura - Right 346-NLA 22582-NLA 22625-NLA 348-NLA 3420-NLA Contoura - Left 347-NLA 25807-NLA 25808-NLA 349-NLA 342-NLA # Adapter, Curve Contoura Recline Upper Arm - After 5/4/09 Adapter Side 6" Wide 8" Wide 20" Wide 22" Wide 24" Wide Curve Contoura - Right 6802 6655 6660 6796 6820 Curve Contoura - Left 6803 6656 666 6797 682 36

Arm Mounting Hardware Conventional and Contoura Recline and Tilt/Recline Seating Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Adapter, Contoura Recline Upper Arm - Before 5/5/09 See Chart # Adapter, Curve Contoura Recline Upper Arm - After 5/4/09 22595 Adapter, Conventional Recline Upper Arm - Right 25809 Adapter, Conventional Recline Upper Arm - Left 2 006490 Tip, Plastic, Black 3 A 24682 Recline Arm Socket Bracket Assembly, Black - Right 3 A 24683 Recline Arm Socket Bracket Assembly, Black - Left 4 028594 Pin, Arm Lock, Black 5 4747X074 Spring, Arm Lock 6 090768 Kit, Lock Handle w/rivets (Pair) 2 7 B 25735-NLA NLA - Kit, Recline Arm Socket Assembly and Upper Arm Adapter Mounting Hardware 8 Screw, Hex Head w/ Patch (/4-20 x 5/8") 2 9 Washer (/4 x /2 x /6") 2 0 T-Nut (/4-20) 2 T-Nut (5/6-8) 2 T-Nut (5/6-8) 3 Screw, Hex Head w/ Patch (5/6-8 x 3/4") 2 4 Washer, Steel (5/6 x 3/4 x /6") 2 5 NLA - Screw, Socket Flat Head w/ Patch (/4-20X/2") 2 NOTE: A - Includes Recline Arm Socket Bracket and items 4-6. B - Includes items 8-5. 37

Arm Mounting Hardware Conventional and Contoura Tilt Seating 38

Item Number Note Part Number Description Arm Mounting Hardware Conventional and Contoura Tilt Seating Quantity Per Package Assembly 25478 Bracket, Arm Socket/Cane, Rear - Right 25479 Bracket, Arm Socket/Cane, Rear - Left 2 A 25734 Kit, Front/Rear Arm Socket Assembly Mounting Hardware 3 Screw, Hex Head w/ Patch (5/6-8 x 3/4") 2 4 Washer, Steel (5/6 x 3/4 x /6") 4 5 T-Nut (5/6-8) 4 6 Screw, Hex Head w/ Patch (5/6-8 x 5/8") 2 7 B 2269 Socket, Arm, Front - Right 7 B 22620 Socket, Arm, Front - Left 8 028594 Pin, Arm Lock, Black 9 4747X074 Spring, Arm Lock 0 090768 Kit, Lock Handle w/rivets (Pair) 2 C 25736 Kit, Swingaway Armrest Mounting Hardware 2 Pin, Pull 3 Screw, Hex Head w/ Patch (/4-20 x 3/4") 4 Locknut (/4-20) 2 5 Screw, Socket Button Head (/4-20 x -5/8") 6 Clevis, Pivot 7 Washer (/4 x /2 x /6") NOTE: A - Includes items 3-6 B - Includes Front Arm Socket and items 8-0 C - Includes items 2-7 39

Contoura Seating Shroud Covers 40

Contoura Seating Shroud Covers Item Number Note Part Number Description Quantity Per Package Assembly A 25705 NLA - Kit, Controller and Seat Frame Shroud Covers with Hardware 2 NLA - Cover, Back, Controller Shroud 4 Screw, Button Head w/ Patch (/4-20 x /2") 4 5 T-Nut (/4-20) 2 6 Screw, Phillips Pan Head (#6-32 x -/8") 2 7 Nut, Hex Lock (#6-32) 2 8 NLA - Bracket, Shroud, Black - Right 8 NLA - Bracket, Shroud, Black - Left 9 Fastener, Dual Lock (/2" W x 7/8" L) 8 0 NLA - Cover Assembly, Seat Frame Shroud 3 B 25728-NLA Kit, Controller Shroud Mounting Hardware 4 Screw, Button Head w/ Patch (/4-20 x /2") 4 5 T-Nut (/4-20) 2 6 Screw, Phillips Pan Head (#6-32 x -/8") 2 7 Nut, Hex Lock (#6-32) 2 8 NLA - Bracket, Shroud, Black - Right 8 NLA - Bracket, Shroud, Black - Left 9 Fastener, Dual Lock (/2" W x 7/8" L) 4 0 C 25704-NLA NLA - Cover Assembly, Seat Frame Shroud 9 09097 Fastener, Dual Lock (/2" W x 7/8" L) 4 4308 Screw, Phillips Pan Head Tap (#0-32 x /2") 2 NOTE: A - Includes items 2, 4-0 B - Includes items 4-9 C - Includes Shroud Cover, items 9 and 4

Conventional Shroud Cover 42

Item Number Note Part Number Description Conventional Shroud Cover Quantity Per Package Assembly A 25704-NLA NLA - Cover Assembly, Seat Frame Shroud 2 4308 Screw, Phillips Pan Head Tap (#0-32 x /2") 2 3 09097 Fastener, Dual Lock (/2" W x 7/8" L) 8 NOTE: A - Includes the Shroud Cover and items 2-3 43

Shroud Covers Before 3//07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics NOTE: MK6i connectors are bundled and cable-tied to the MK6i Connector Shroud Mounting Tray Assembly item # Item Number Note Part Number Description A 2 2 3 4 6 7 8 9 0 B 2 2 3 4 5 6 7 8 9 0 2 C 2 2 3 4 6 7 8 9 0 Quantity Per Package Assembly 40266-NLA NLA - Kit, TRECM/TAC/MK6i Connector Shroud Mtg. Hdwr. 6-20" Wide For Conventional Tilt Only Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (/4-20 x -/2") 2 Spacer, Coved (/4 x /6 x /2") 4 Tube, Spreader Bar, Black (6-20" W) Collar, Anti-Rattle (7/8") 2 Screw, Hex Head (/4-20 x 5/8") 2 Locknut (/4-20) 4 Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly 40267-NLA NLA - Kit, TRECM/TAC/MK6i Connector Shroud Mtg. Hdwr. 20-24" Wide For Conventional Tilt Only Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (/4-20 x -/2") 4 Spacer, Coved (/4 x /6 x /2") 8 Locknut (/4-20) 2 Tube, Spreader Bar, Black (20-24" W) Collar, Anti-Rattle (7/8") 2 Screw, Hex Head (/4-20 x 5/8") 2 Locknut (/4-20) 4 Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly 40268 NLA - Kit, TRECM/TAC/MK6i Connector Shrouds and Mtg. Hdwr. 6-20" Wide For Conventional Tilt Only NLA - Screw, Phillips Pan Head w/ Patch (#0-32 x 2 3/8") Bracket, Spreader Bar, Black - Right Bracket, Spreader Bar, Black - Left Screw, Hex Head (/4-20 x -/2") 2 Spacer, Coved (/4 x /6 x /2") 4 Tube, Spreader Bar, Black (6-20" W) Collar, Anti-Rattle (7/8") 2 Screw, Hex Head (/4-20 x 5/8") 2 Locknut (/4-20) 4 Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly 45

Shroud Covers Before 3//07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics NOTE: MK6i connectors are bundled and cable-tied to the MK6i Connector Shroud Mounting Tray Assembly item # Item Number Note Part Number Description Quantity Per Package Assembly 3 Screw, Thumb (#0-32 x /2") 4 NLA - Shroud, Cover 5 Shroud, Back 6 Screw, Phillips Pan Head Tap (#0-32 x /2") 4 2 D 40269 NLA - Kit, TRECM/TAC/MK6i Connector Shrouds and Mtg. Hdwr. 20-24" Wide For Conventional Tilt Only NLA - Screw, Phillips Pan Head w/ Patch (#0-32 x 2 3/8") 2 Bracket, Spreader Bar, Black - Right 2 Bracket, Spreader Bar, Black - Left 3 Screw, Hex Head (/4-20 x -/2") 4 4 Spacer, Coved (/4 x /6 x /2") 8 5 Locknut (/4-20) 2 6 Tube, Spreader Bar, Black (20-24" W) 7 Collar, Anti-Rattle (7/8") 2 8 Screw, Hex Head (/4-20 x 5/8") 2 9 Locknut (/4-20) 4 0 Plate, Mounting NLA - TRECM/SAC/TAC/MK6i Connector Shroud Mounting Tray Assembly 3 Screw, Thumb (#0-32 x /2") 4 NLA - Shroud, Cover 5 Shroud, Back 6 Screw, Phillips Pan Head Tap (#0-32 x /2") 4 E 095502-NLA NLA - Package, Tie Wrap (-/2" L) 0 NOTE: A - Includes items 2-4 and 6- B - Includes items 2-2 C - Includes (part #07936 Screw - Not Shown and not used for MK6i application) and items 2-4, 6- and 3-6 D - Includes (part #07936 Screw - Not Shown and not used for MK6i application) and items 2- and 3-6 E - Not Shown 46

Shroud Cover After 2/28/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics 47

Shroud Cover After 2/28/07 Conventional Tilt, Tilt w/ BPO or Tilt-Elevate w/ MK6i Electronics Item Number Note Part Number Description Quantity Per Package Assembly A,C 4823-NLA NLA - Kit, MK6i Connector Shroud Mtg. Hdwr. 6-20" Wide For Conventional Tilt Only 2 Bracket, Spreader Bar, Black - Right 2 Bracket, Spreader Bar, Black - Left 3 Screw, Hex Head (/4-20 x -/2") 2 4 Spacer, Coved (/4 x /6 x /2") 4 6 Tube, Spreader Bar, Black (6-20" W) 7 Collar, Anti-Rattle (7/8") 2 8 Screw, Hex Head (/4-20 x 5/8") 4 9 Locknut (/4-20) 6 0 Plate, Mounting Tray, MK6i Connector Shroud Mounting 2 Bracket, MK6i Connector, Black B,C 48232-NLA NLA - Kit, MK6i Connector Shroud Mtg. Hdwr. 20-24" Wide For Conventional Tilt Only 2 Bracket, Spreader Bar, Black - Right 2 Bracket, Spreader Bar, Black - Left 3 Screw, Hex Head (/4-20 x -/2") 4 4 Spacer, Coved (/4 x /6 x /2") 8 5 Locknut (/4-20) 2 6 Tube, Spreader Bar, Black (20-24" W) 7 Collar, Anti-Rattle (7/8") 2 8 Screw, Hex Head (/4-20 x 5/8") 4 9 Locknut (/4-20) 6 0 Plate, Mounting Tray, MK6i Connector Shroud Mounting 2 Bracket, MK6i Connector, Black 2 C 5425 Kit, MK6i Connector Bracket and Threaded Insert 3 7240 Screw, Thumb (#0-32 x /2") 4 485-NLA NLA - Shroud, MK6i Connector 5 095502-NLA NLA - Package, Tie Wrap (-/2" L) 0 NOTE: A - Includes items 2-4 and 6-2 B - Includes items 2-2 C - Item 2 MK6i Connector Bracket was revised 4/28/08 and is backward compatible. When a new MK6i Connector Bracket is requested, order service part # 5425. 48

Shroud Covers Recline & Tilt/Recline Conventional or Contoura Seating w/ MK6i Electronics 49

Shroud Covers Recline & Tilt/Recline Conventional or Contoura Seating w/ MK6i Electronics Item Number Note Part Number Description 2 3 Quantity Per Package Assembly 4650-NLA NLA - Cover with Decal, Contoura (6-24" W) 46502-NLA NLA - Cover with Decal, Conventional (6-20" W) 46503-NLA NLA - Cover with Decal, Conventional (20-24" W) 09047-NLA NLA - Decal, Invacare Medallion - Large 7240 Screw, Thumb (#0-32 x /2") 50

MK6i Electronics 5

MK5 Electronics 52

Front Riggings 53

Arm Pads Otto Bock Channel Forearm Pads include all hardware and Instructions for attaching to a wheelchair or Elevating Swivel Unit. Hardware to attach a Hand Pad to the Channel Forearm Pad comes with the Channel Forearm Pad only. The Channel Forearm Pad hardware is not sold separately. Item Number Note Part Number Description Quantity Per Package Assembly 0020700 Pad, Small Channel Forearm 2 0023000 Pad, Flat Hand - Large 3 002700-NLA NLA - Kit, Hand/ Forearm Pad Strap 4 0020600 Pad, Medium Channel Forearm 5 0023300 Pad, Flat Hand - Medium 6 0020500 Pad, Large Channel Forearm 7 002600-NLA NLA - Pad, Palm Extensor Hand - Right 7 002500-NLA NLA - Pad, Palm Extensor Hand - Left 8 A 66835 Unit, Elevating Swivel - Right/Left (7/8") 9 0020400 Pad, One Piece Channel Forearm 0 064900-NLA NLA - Pad, Cone Hand - Right 0 064800-NLA NLA - Pad, Cone Hand - Left NOTE: A - 002400 Unit, Elevating Swivel - Right (7/8") and 002300 Unit, Elevating Swivel - Left (7/8") are replaced with part number 66835. The new Unit can be used on the right or left side of the wheelchair. 55

Back Cane Push Handle Attachments Conventional Tilt and Tilt w/ BPO Option 56

Back Cane Push Handle Attachments Conventional Tilt and Tilt w/ BPO Option Item Number Note Part Number Description Quantity Per Package Assembly A 33259 Kit, Back Cane Push Handle Attachments (Pair) 2 Grip, Foam, Hand (4-/2" L) 2 3 Plug Button, Black (7/8") 2 4 Attachment, Back Cane Push Handle 2 5 Screw, Hex Head (/4-20 x -/4") 4 6 Spacer (/4 x 3/8 x 3/6") 4 7 Locknut (/4-20) 4 NOTE: A - Includes items 2-7. For chairs manufactured before 4/4/05, new back canes may be required. See page titled "Back Canes, Solid Straight and Mounting Hardware, Conventional Tilt and Tilt w/ BPO Option" 57

Back Cane Push Handle Attachments Contoura Seating 58

Back Cane Push Handle Attachments Contoura Seating Item Number Note Part Number Description Quantity Per Package Assembly A 25706 Kit, Back Cane Push Handle Attachments (Pair) 2 Attachment, Back Cane Push Handle 2 3 Locknut (/4-20) 4 4 Spacer (/4 x 3/8 x 3/6") 4 5 Screw, Hex Head (/4-20 x -/4") 4 NOTE: A - Includes items 2-5 59

Headrest Support Assembly, Tarsys 60

Headrest Support Assembly, Tarsys Item Number Note Part Number Description Quantity Per Package Assembly 027700 Headrest, Curved (6" W x 7" H) 028000-NLA NLA - Headrest, Two-Step (8-/2" W x 5-/2" H) 0022600 Kit, Headrest w/ Screws, Adjustable, Small, Otto Bock (9" W x 3-/2" H) 0022400 Kit, Headrest w/ Screws, Adjustable, Large, Otto Bock (2" W x 6" H) 2 A 097024 Fixture Assembly, Offset Support 3 027524-NLA NLA - Tube, Offset Fixture, Black 4 077076-NLA NLA - Plug Button, Square (/2") 2 5 02724-NLA NLA - Collar, Offset Fixture Tube 6 0288606 Screw, Set Socket Cup Point (#0-24 x 3/6") 7 027224 Half Clamp, Non-Threaded Holes 8 027324 Half Clamp, Threaded Holes 9 027268 Screw, Allen Head (/4-20 x ") 3 0 027424-NLA NLA - Tube, Fixture Adjustment 0283724 Ring, Fixture Clamp 2 0067006-NLA NLA - Screw, Cap, Socket Head (#0-32 x /2") 3 3 B 24686 Kit, Headrest Mounting Hardware 4 C,E 027300 Kit, Headrest Clamp, Lever Style 5 D 0237422-NLA NLA - Clamp, Small Bottom Half 6 D 0237522-NLA NLA - Clamp, Small Top Half 7 072439-NLA NLA - Knob, Adjustment, Black (3/4" L Threads) 8 0288706 Screw, Socket, Flat Head (/4-20 x ") 2 9 025736 Locknut (/4-20) 2 NOTE: A - Includes items 3-2 B - Individual components are not available. The Headrest Mounting Hardware Kit was revised to include a Wire Guard Bracket and is used for Conventional and Contoura Backs. The Headrest Mounting Hardware Kit is also backward compatible in the field. C - Includes items 5-9. Item 7 Adjustment Knob was replaced with an Adjustment Lever. The Lever is not available as a separate part. The knob Part # 072439 is interchangeable with the Lever. D - Clamp is no longer available individually. See item 4 Clamp Assembly part number 027300. E - Hardware can also be used with an Invacare Personal Back. 6

Headrest Support Assembly, Stealth CP75/CP275/CP80/CP280 62

Headrest Support Assembly, Stealth CP75/CP275/CP80/CP280 Item Number Note Part Number Description Quantity Per Package Assembly A,H 27408-NLA NLA - Kit, Headrest 0" TWB Comfort Plus Stealth (CP280) A,H 27409-NLA NLA - Kit, Headrest 4" TWB Comfort Plus Stealth (CP80) A,H 2740-NLA NLA - Kit, Headrest 0" Multi-Axis Comfort Plus Stealth (CP275) A 274-NLA NLA - Kit, Headrest 4" Multi-Axis Comfort Plus Stealth (CP75) 2 B 24686 Kit, Headrest Mounting Hardware 3 B,C 2744 Kit, Link Extension Stealth 4 D,F,G 027300 Kit, Headrest Clamp, Lever Style 5 E 0237422-NLA NLA - Clamp, Small Bottom Half 6 E 0237522-NLA NLA - Clamp, Small Top Half 7 072439-NLA NLA - Knob, Adjustment, Black (3/4" L Threads) 8 0288706 Screw, Socket, Flat Head (/4-20 x ") 2 9 025736 Locknut (/4-20) 2 NOTE: A - The mounting hardware will contain a lever and star knob tightening device. Disregard the lever that is provided standard by stealth and use the star knob designed for the Formula TRE systems. B - Individual components are not available. The Headrest Mounting Hardware Kit was revised to include a Wire Guard Bracket and is used for Conventional and Contoura Backs. The Headrest Mounting Hardware Kit is also backward compatible in the field. C - The Stealth Link Extension used on the Stealth Comfort Plus TWB models only D - Includes items 5-9. Item 7 Adjustment Knob was replaced with an Adjustment Lever. The Lever is not available as a separate part. The knob Part # 072439 is interchangeable with the Lever. E - Clamp is no longer available individually. See item 4 Clamp Assembly part number 027300. F - Hardware can also be used with an Invacare/Matrx Personal Back, Matrx PB Posture Back and Matrx Elite Backs. G - For Matrx Elite Backs, item #4 Headrest Clamp Kit attaches to an Adapter Plate that is only included with the Adapter Plate Kit model numbers EHRA-S, EHRA-M or EHRA-L. Refer to the Matrx Rehab Seating and Postioning Pricelist for additional information. H - Stealth Headrest No Longer Available. See page titled "Headrest Support Assembly - Matrx Elan MEHSP-0, 4" for replacement. 63

Headrest Support Assembly - Matrx Elan (MEHSP-0,4) Item Number Note Part Number Description Quantity Per Package Assembly A 6002830 Kit, Matrx Elan Standard Headrest Pad (0" W) B 6002833 Kit, Matrx Elan Standard Headrest Pad (4" W) 2 C 6002826 Kit, Elan Multi-Axis Articulating Headrest Mounting Hardware NOTE: A - For model MEHSP-0 B - For model MEHSP-4 C - For model MEMAH 64

Lateral Support Assembly, Tarsys TMSLM/TMSLL Conventional Tilt and Tilt w/ BPO Option 65

Lateral Support Assembly, Tarsys TMSLM/TMSLL Conventional Tilt and Tilt w/ BPO Option Item Number Note Part Number Description A 3 4 5 6 7 7 8 9 2 3 4 5 A 3 4 5 6 7 7 8 9 2 3 4 5 2 B 3 4 5 6 7 8 9 Quantity Per Package Assembly 07298 Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (Pair) Bracket, Extension Offset, Black (2") 2 Bracket, Extension Offset, Black (") 2 Bracket, Extension Offset, Black (/2") 2 Bracket, Flush Mount, Black 2 NLA - Bracket, Swingaway, Cane Clamp, Black - Right NLA - Bracket, Swingaway, Cane Clamp, Black - Left Screw, Socket Flat Head (#0-32 x /2") 2 Bracket, Mounting, Black 2 NLA - Screw, Hex Head (/4-20 x -/8") 6 Half Clamp, Non-Threaded Holes 2 NLA - Half Clamp, Threaded Holes 2 Screw, Socket Flat Head (/4-20 x /2") 4 Pad, Lateral Support - Medium (6" W x 4" H) 2 07299 Kit, Swingaway Lateral Support Assembies w/ Large Pads (Pair) Bracket, Extension Offset, Black (2") 2 Bracket, Extension Offset, Black (") 2 Bracket, Extension Offset, Black (/2") 2 Bracket, Flush Mount, Black 2 NLA - Bracket, Swingaway, Cane Clamp, Black - Right NLA - Bracket, Swingaway, Cane Clamp, Black - Left Screw, Socket Flat Head (#0-32 x /2") 2 Bracket, Mounting, Black 2 NLA - Screw, Hex Head (/4-20 x -/8") 6 Half Clamp, Non-Threaded Holes 2 NLA - Half Clamp, Threaded Holes 2 Screw, Socket Flat Head (/4-20 x /2") 4 Pad, Lateral Support - Large (6" W x 5" H) 2 07245 Kit, Swingaway Bracket Assembly with Offset Brackets, Cane Clamp - Right Bracket, Extension Offset, Black (2") Bracket, Extension Offset, Black (") Bracket, Extension Offset, Black (/2") Bracket, Flush Mount, Black NLA - Bracket, Swingaway, Cane Clamp, Black - Right Screw, Socket Flat Head (#0-32 x /2") 6 Bracket, Mounting, Black NLA - Screw, Hex Head (/4-20 x -/8") 3 66

Lateral Support Assembly, Tarsys TMSLM/TMSLL Conventional Tilt and Tilt w/ BPO Option Item Number Note Part Number Description Quantity Per Package Assembly 2 Half Clamp, Non-Threaded Holes 3 NLA - Half Clamp, Threaded Holes 2 B 07246 Kit, Swingaway Bracket Assembly with Offset Brackets, Cane Clamp - Left 3 Bracket, Extension Offset, Black (2") 4 Bracket, Extension Offset, Black (") 5 Bracket, Extension Offset, Black (/2") 6 Bracket, Flush Mount, Black 7 NLA - Bracket, Swingaway, Cane Clamp, Black - Left 8 Screw, Socket Flat Head (#0-32 x /2") 6 9 Bracket, Mounting, Black NLA - Screw, Hex Head (/4-20 x -/8") 3 2 Half Clamp, Non-Threaded Holes 3 NLA - Half Clamp, Threaded Holes 0 C 077 Kit, Lateral Support Mounting Hardware NLA - Screw, Hex Head (/4-20 x -/8") 3 2 Half Clamp, Non-Threaded Holes 3 NLA - Half Clamp, Threaded Holes NOTE: A - Includes items 3-9 and -5 B - Includes items 3-9 and -3 C - Includes items -3 67

Lateral Support Assembly, Stealth TWB-RPR/TWB-RPRL Conventional Tilt & Tilt w/ BPO Option Item Number Note Part Number Description A 25826 Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (5" W x 3" H), Stealth (TWB-RPR) (Pair) A 25823 Kit, Swingaway Lateral Support Assemblies w/ Large Pads (6" W x 4" H), Stealth (TWB-RPRL) (Pair) NOTE: A - Individual components are not available Quantity Per Package Assembly 68

Lateral Support Assembly, Tarsys TMSLM/TMSLL For Conventional Recline, Tilt/Recline & Recline w/ BPO Option 69

Lateral Support Assembly, Tarsys TMSLM/TMSLL For Conventional Recline, Tilt/Recline & Recline w/ BPO Option Item Number Note Part Number Description Quantity Per Package Assembly A 090200 Kit, Swingaway Lateral Support Assembly w/ 2 Medium Pads (Pair) 2 Pad, Lateral Support - Medium (6" W x 4" H) 2 3 T-Nut (/4-20) 4 4 Screw, Socket Flat Head (/4-20 x /2") 8 6 Bracket, Extension Offset, Black (/2") 2 7 Bracket, Extension Offset, Black (") 2 8 Bracket, Extension Offset, Black (2") 2 9 Bracket, Flush Mount, Black 4 0 Bracket, Swingaway - Right 0 NLA - Bracket, Swingaway - Left Screw, Socket Flat Head (#0-32 x /2") 8 A 09020 Kit, Swingaway Lateral Support Assembly w/ Large 2 Pads (Pair) 2 Pad, Lateral Support - Large (6" W x 5" H) 2 3 T-Nut (/4-20) 4 4 Screw, Socket Flat Head (/4-20 x /2") 8 6 Bracket, Extension Offset, Black (/2") 2 7 Bracket, Extension Offset, Black (") 2 8 Bracket, Extension Offset, Black (2") 2 9 Bracket, Flush Mount, Black 4 0 Bracket, Swingaway - Right 0 NLA - Bracket, Swingaway - Left Screw, Socket Flat Head (#0-32 x /2") 8 5 B 09098 Kit, Swingaway Bracket Assembly w/ Offset Brackets - Right 6 Bracket, Extension Offset, Black (/2") 7 Bracket, Extension Offset, Black (") 8 Bracket, Extension Offset, Black (2") 9 Bracket, Flush Mount, Black 2 0 Bracket, Swingaway - Right Screw, Socket Flat Head (#0-32 x /2") 4 5 B 09099 Kit, Swingaway Bracket Assembly w/ Offset Brackets - Left 6 Bracket, Extension Offset, Black (/2") 7 Bracket, Extension Offset, Black (") 8 Bracket, Extension Offset, Black (2") 9 Bracket, Flush Mount, Black 2 0 NLA - Bracket, Swingaway - Left Screw, Socket Flat Head (#0-32 x /2") 4 NOTE: A - Includes items 2-4 and 6- B - Includes items 6-70

Lateral Support Assembly, Stealth TWB-TPR/TWB-TPRL Conventional Recline, Tilt/Recline & Recline w/ BPO Option Item Number Note Part Number Description A 25825 Kit, Swingaway Lateral Support Assembly w/ Medium Pads (5" W x 3" H), Stealth (TWB-TPR) (Pair) A 2582 Kit, Swingaway Lateral Support Assembly w/ Large Pads (6" W x 4" H), Stealth (TWB-TPRL) (Pair) NOTE: A - Individual components are not available Quantity Per Package Assembly 2 2 7

Lateral Support Assembly, Tarsys CSLM/CSLL Contoura Seating 72

Lateral Support Assembly, Tarsys CSLM/CSLL Contoura Seating Item Number Note Part Number Description A 2 4 5 6 7 8 9 0 2 3 3 4 5 6 7 8 A 2 4 5 6 7 8 9 0 2 3 3 4 5 6 7 8 3 B 4 5 6 7 8 9 Quantity Per Package Assembly 28353 Kit, Lateral Support Assemblies w/ Medium Pads (Pair) Pad, Lateral Support - Medium (6" W x 4" H) 2 Screw, Socket Button (/4-20 x 3/4") 4 Washer (/4 x /2 x /6") 4 Locknut (#0-32) 4 Bracket, Positioning Strap, Black 2 Locknut (/4-20) 4 Screw, Socket Flat Head (#0-32 x /2") 4 Bracket, Mounting, Black 2 Screw, Socket Flat Head (#0-32 x /2") 4 Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Bracket, Flush Mount, Black 2 Bracket, Extension Offset, Black (/2") 2 Bracket, Extension Offset, Black (") 2 Bracket, Extension Offset, Black (2") 2 Screw, Socket Flat Head (/4-20 x /2") 4 28354 Kit, Lateral Support Assemblies w/ Large Pads (Pair) Pad, Lateral Support - Large (6" W x 5" H) 2 Screw, Socket Button (/4-20 x 3/4") 4 Washer (/4 x /2 x /6") 4 Locknut (#0-32) 4 Bracket, Positioning Strap, Black 2 Locknut (/4-20) 4 Screw, Socket Flat Head (#0-32 x /2") 4 Bracket, Mounting, Black 2 Screw, Socket Flat Head (#0-32 x /2") 4 Bracket, Swingaway - Right NLA - Bracket, Swingaway - Left Bracket, Flush Mount, Black 2 Bracket, Extension Offset, Black (/2") 2 Bracket, Extension Offset, Black (") 2 Bracket, Extension Offset, Black (2") 2 Screw, Socket Flat Head (/4-20 x /2") 4 25780 Kit, Lateral Support Mounting Hardware (Pair) Screw, Socket Button (/4-20 x 3/4") 4 Washer (/4 x /2 x /6") 4 Locknut (#0-32) 4 Bracket, Positioning Strap, Black 2 Locknut (/4-20) 4 Screw, Socket Flat Head (#0-32 x /2") 4 73

Lateral Support Assembly, Tarsys CSLM/CSLL Contoura Seating Item Number Note Part Number Description Quantity Per Package Assembly 0 Bracket, Mounting, Black 2 2 Screw, Socket Flat Head (#0-32 x /2") 4 3 Bracket, Swingaway - Right 3 NLA - Bracket, Swingaway - Left 4 Bracket, Flush Mount, Black 2 5 Bracket, Extension Offset, Black (/2") 2 6 Bracket, Extension Offset, Black (") 2 7 Bracket, Extension Offset, Black (2") 2 8 Screw, Socket Flat Head (/4-20 x /2") 4 C 09098 Kit, Swingaway Bracket Assembly w/ Offset Brackets - Right 2 Screw, Socket Flat Head (#0-32 x /2") 4 3 Bracket, Swingaway - Right 4 Bracket, Flush Mount, Black 2 5 Bracket, Extension Offset, Black (/2") 6 Bracket, Extension Offset, Black (") 7 Bracket, Extension Offset, Black (2") C 09099 Kit, Swingaway Bracket Assembly w/ Offset Brackets - Left 2 Screw, Socket Flat Head (#0-32 x /2") 4 3 NLA - Bracket, Swingaway - Left 4 Bracket, Flush Mount, Black 2 5 Bracket, Extension Offset, Black (/2") 6 Bracket, Extension Offset, Black (") 7 Bracket, Extension Offset, Black (2") NOTE: A - Includes items 2, 4-0 and 2-8 B - Includes items 4-0 and 2-8 C - Includes items 2-7 74

Lateral Support Assembly, Stealth TWB-CPR/TWB-CPRL Contoura Seating 75

Lateral Support Assembly, Stealth TWB-CPR/TWB-CPRL Contoura Seating Item Number Note Part Number Description Quantity Per Package Assembly A 28734 Kit, Swingaway Lateral Support Assemblies w/ Medium Pads (5" W x 3" H), Stealth (Pair) 2 Support, Swingaway Lateral w/ Medium Pads (5" W 2 x 3" H), Stealth (TWB-CPR) 4 Screw, Socket Button (/4-20 x 3/4") 4 5 Locknut (/4-20) 8 6 Bracket, Positioning Strap, Black 2 7 Washer (/4 x /2 x /6") 4 8 Screw, Socket Button Head (/4-20 x /2") 4 A 28735 Kit, Swingaway Lateral Support Assemblies w/ Large Pads (6" W x 4" H), Stealth (Pair) 2 Support, Swingaway Lateral w/ Large Pads (6" W x 2 4" H), Stealth (TWB-CPRL) 4 Screw, Socket Button (/4-20 x 3/4") 4 5 Locknut (/4-20) 8 6 Bracket, Positioning Strap, Black 2 7 Washer (/4 x /2 x /6") 4 8 Screw, Socket Button Head (/4-20 x /2") 4 3 B 28733 Kit, Swingaway Lateral Support Mounting Hardware, Stealth (Pair) 4 Screw, Socket Button (/4-20 x 3/4") 4 5 Locknut (/4-20) 8 6 Bracket, Positioning Strap, Black 2 7 Washer (/4 x /2 x /6") 4 8 Screw, Socket Button Head (/4-20 x /2") 4 NOTE: A - Includes items 2 and 4-8 B - Includes items 4-8 76

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option 77

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Item #. 2. 3. 4. 5. 6. 7. 8. 9. 0. Description Conventional Tilt w/ Conventional Back 6, 7, 8, 9, 20" Wide Conv. Tilt w/ Conv. Back 6" Wide Conv. Tilt w/ Conv. Back 7" Wide Conv. Tilt w/ Conv. Back 8" Wide Conv. Tilt w/ Conv. Back 9" Wide Conv. Tilt w/ Conv. Back 20" Wide Vent Tray Kit 42994-NLA 42995-NLA 42996-NLA 42997-NLA 42998-NLA & Service Manual See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A Kit, Vent Tray Assembly without 25708 25708 25708 25708 25708 Mounting Hardware Kit, Vent Tray Mounting 25805 25805 25805 25805 25805 Hardware Spreader Bar Assembly 003602 003702 003802 003902 004002 Spreader Bar Mounting 2576 2576 2576 2576 2576 Hardware Battery Wire Harness with Terminal 20363 20363 20363 20363 20363 Hardware, 22NF Rear Battery Wire Harness with Terminal 20362 20362 20362 20362 20362 Hardware, 22NF Front Battery Wire Harness with Terminal 243 243 243 243 243 Hardware, 22NF Vent Battery Tray Assembly, TDX 22NF 242-NLA 242-NLA 242-NLA 242-NLA 242-NLA For Vent Kit, Vent Battery Harness Assembly 2029-NLA 2029-NLA 2029-NLA 2029-NLA 2029-NLA with Hardware Qty. Per Asbly. 78

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Conventional Tilt w/ Conventional Back 6, 7, 8, 9, 20" Wide Item # Description Conv. Tilt w/ Conv. Back 6" Wide Conv. Tilt w/ Conv. Back 7" Wide Conv. Tilt w/ Conv. Back 8" Wide Conv. Tilt w/ Conv. Back 9" Wide Conv. Tilt w/ Conv. Back 20" Wide Qty. Per Asbly.. 2. 3. Kit, Vent Battery Harness Assembly 3953-NLA 3953-NLA 3953-NLA 3953-NLA 3953-NLA with Hardware For TRBKTS Option Kit, Battery Support Bracket Assembly - For Vent 3954-NLA 3954-NLA 3954-NLA 3954-NLA 3954-NLA "Option" System w/ 22NF Batteries See Note(s) B Kit, Battery Box Door Assembly, 2072-NLA 2072-NLA 2072-NLA 2072-NLA 2072-NLA 22NF Long (For Vent) See Note(s) B 4. Spring, Dark Yellow; 25645-NLA 25645-NLA 25645-NLA 25645-NLA 25645-NLA EXTRA 2 Heavy Duty See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C Instruction 5. Sheet, 4385-NLA 4385-NLA 4385-NLA 4385-NLA 4385-NLA Formula TRE Vent Tray Kit NOTE: A - Vent Tray Kit includes items 2-5. B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/0. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 79

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option (Conventional Tilt w/ Conventional Back 2, 22, 23, 24" Wide) & (Conventional Tilt w/ BPO Option) Item #. 2. 3. 4. 5. 6. 7. 8. 9. 0. Description Conv. Tilt w/ Conv. Back 2" Wide Conv. Tilt w/ Conv. Back 22" Wide Conv. Tilt w/ Conv. Back 23" Wide Conv. Tilt w/ Conv. Back 24" Wide Conv. Tilt w/ BPO Option Vent Tray Kit 42999-NLA 43000-NLA 4300-NLA 43002-NLA 43003-NLA & Service Manual See Note(s) A See Note(s) A See Note(s) A See Note(s) A See Note(s) A Kit, Vent Tray Assembly without 25708 25708 25708 25708 25708 Mounting Hardware Kit, Vent Tray Mounting 25805 25805 25805 25805 25805 Hardware Spreader Bar Assembly 00402 004202 0284202-NLA 0284302-NLA N/A Spreader Bar Mounting 2576 2576 2576 2576 N/A Hardware Battery Wire Harness with Terminal 20363 20363 20363 20363 20363 Hardware, 22NF Rear Battery Wire Harness with Terminal 20362 20362 20362 20362 20362 Hardware, 22NF Front Battery Wire Harness with Terminal 243 243 243 243 243 Hardware, 22NF Vent Battery Tray Assembly, TDX 22NF 242-NLA 242-NLA 242-NLA 242-NLA 242-NLA For Vent Kit, Vent Battery Harness Assembly 2029 2029 2029 2029 2029 with Hardware Qty. Per Asbly. 80

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option (Conventional Tilt w/ Conventional Back 2, 22, 23, 24" Wide) & (Conventional Tilt w/ BPO Option) Item # Description Conv. Tilt w/ Conv. Back 2" Wide Conv. Tilt w/ Conv. Back 22" Wide Conv. Tilt w/ Conv. Back 23" Wide Conv. Tilt w/ Conv. Back 24" Wide Conv. Tilt w/ BPO Option Qty. Per Asbly.. 2. 3. Kit, Vent Battery Harness Assembly with Hardware For TRBKTS Option 3953 3953 3953 3953 3953 Kit, Battery Support Bracket Assembly - For Vent "Option" 3954-NLA 3954-NLA 3954-NLA 3954-NLA 3954-NLA System w/ 22NF Batteries See Note(s) B Kit, Battery Box Door Assembly, 2072-NLA 2072-NLA 2072-NLA 2072-NLA 2072-NLA 22NF Long (For Vent) See Note(s) B 4. Spring, Dark Yellow; 25645-NLA 25645-NLA 25645-NLA 25645-NLA 25645-NLA EXTRA 2 Heavy Duty See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C Instruction 5. Sheet, 4385-NLA 4385-NLA 4385-NLA 4385-NLA 4385-NLA Formula TRE Vent Tray Kit NOTE: A - Vent Tray Kit includes items 2-5. The Conventional Tilt w/ BPO Option omits items 2 and 3. B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/0. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 8

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Item #. 2. 3. 4. 5. 6. 7. 8. 9. 0.. Description Conventional Recline, Tilt/Recline 6-24" Wide Conv. Recline 6-20" Wide Conv. Recline 20-24" Wide Conv. Tilt/Recline 6-20" Wide 43006-NLA Conv. Tilt/Recline 20-24" Wide 43007-NLA Vent Tray Kit & Service Manual 43004-NLA See Note(s) A 43005-NLA See Note(s) A See Note(s) A See Note(s) A Kit, Vent Tray Assembly without 25708 25708 25708 25708 Mounting Hardware Kit, Vent Tray Mounting 2589-NLA 2589-NLA 25800 25800 Hardware Spreader Bar Assembly 25767-NLA 25769-NLA 25767-NLA 25769-NLA Spreader Bar Mounting 25765 25765 25765 25765 Hardware Battery Wire Harness with Terminal 20363 20363 20363 20363 Hardware, 22NF Rear Battery Wire Harness with Terminal 20362 20362 20362 20362 Hardware, 22NF Front Battery Wire Harness with Terminal 243 243 243 243 Hardware, 22NF Vent Battery Tray Assembly, TDX 242-NLA 242-NLA 242-NLA 242-NLA 22NF For Vent Kit, Vent Battery Harness Assembly with 2029 2029 2029 2029 Hardware Kit, Vent Battery Harness Assembly with 3953 3953 3953 3953 Hardware For TRBKTS Option Qty. Per Asbly. 82

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Conventional Recline, Tilt/Recline 6-24" Wide Item # Description Conv. Recline 6-20" Wide Conv. Recline 20-24" Wide Conv. Tilt/Recline 6-20" Wide Conv. Tilt/Recline 20-24" Wide Qty. Per Asbly. 2. 3. Kit, Battery Support Bracket Assembly - For Vent "Option" System w/ 22NF Batteries 3954-NLA See Note(s) B Kit, Battery Box Door Assembly, 22NF Long (For 2072-NLA Vent) 3954-NLA 2072-NLA 3954-NLA 2072-NLA 3954-NLA 2072-NLA See Note(s) B Spring, Dark 25645-NLA 25645-NLA 25645-NLA 25645-NLA 4. Yellow; EXTRA 2 Heavy Duty See Note(s) C See Note(s) C See Note(s) C See Note(s) C 5. Instruction Sheet, Formula TRE Vent Tray Kit 4385-NLA 4385-NLA 4385-NLA 4385-NLA NOTE: A - Vent Tray Kit includes items 2-5 B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/0. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 83

Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option Contoura Tilt, Tilt/Recline and Recline Item # Description Contoura Tilt & T/R Contoura Recline Qty. Per Asbly.. Vent Tray Kit & 43008-NLA 43009-NLA Service Manual See Note(s) A See Note(s) A Kit, Vent Tray 2. Assembly without 25708 25708 Mounting Hardware 3. Kit, Vent Tray Mounting Hardware 25800-NLA 2589-NLA 4. Spreader Bar Assembly 25788-NLA 25788-NLA 5. Spreader Bar Mounting Hardware 25765 25765 6. Battery Wire Harness with Terminal 20363 20363 Hardware, 22NF Rear 7. Battery Wire Harness with Terminal 20362 20362 Hardware, 22NF Front 8. Battery Wire Harness with Terminal 243 243 Hardware, 22NF Vent 9. Battery Tray Assembly, TDX 22NF 242-NLA 242-NLA For Vent 0. Kit, Vent Battery Harness Assembly 2029 2029 with Hardware. Kit, Vent Battery Harness Assembly with Hardware For 3953 3953 TRBKTS Option 2. Kit, Battery Support Bracket Assembly - For Vent "Option" System w/ 22NF Batteries 3954-NLA 3954-NLA 3. 4. 5. See Note(s) B Kit, Battery Box Door Assembly, 22NF Long (For Vent) See Note(s) B Spring, Dark Yellow; EXTRA Heavy Duty Instruction sheet, Formula TRE Vent Tray Kit 2072-NLA 25645-NLA See Note(s) C 4385-NLA 2072-NLA 25645-NLA See Note(s) C 4385-NLA 2 84

NOTE: Vent Tray Kits NOTE: Vent Tray Kits are not available for chairs with Elevate Option A - Vent Tray Kit includes items 2-5 B - Includes Battery Box Door. C - Spring color changed from Sunny Yellow to Dark Yellow 3/22/0. It is recommended to order springs in pairs to match color and maintain equal spring tension on both sides of the wheelchair 85

Vent Tray Assembly without Mounting Hardware NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 86

Vent Tray Assembly without Mounting Hardware NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note Part Number Description Quantity Per Package Assembly A 25708 Vent Tray Assembly 2 NLA - Vent Tray Hanger Assembly 3 NLA - Strap and Buckle Assembly 4 NLA - Tray, Vent 5 Screw, Socket Button Head (/4-20 x 2") 2 6 Lockwasher, Split (/4") 2 7 Nut, Hex with Nylon Cap (/4-20) 2 8 Spacer, Coved (/4 x 3/4 x /32") 4 9 Screw, Socket Button Head (/4-20 x /2") 4 0 NLA - Spacer 2 NLA - Plug, Slide Tube 2 2 Screw, Socket Button Head (/4-20 x -/4") 2 3 NLA - Decal, Warning, Approved Charger and Harness 4 NLA - Bracket, Vent Tray, Black 5 Locknut (/4-20) 4 6 NLA - Frame, Vent Tray, Upper Support, Black NOTE: A - Includes items 2-6. When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 87

Vent Tray Mounting Hardware Conventional Tilt and BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 88

Vent Tray Mounting Hardware Conventional Tilt and BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note Part Number Description Quantity Per Package Assembly A,A 25805-NLA Kit, Vent Tray Mounting Hardware For Conventional Tilt & Conventional Tilt w/ BPO Option 2 NLA - Locknut (#0-24) 8 3 NLA - Washer, Steel (7/8 x 3/8 x /6") 8 4 Vent Pivot Tube Assembly, Bent 2 5 NLA - Vent Pivot Tube Assembly, Lower 2 6 Spacer, Nylon (/4 x 2 x 3/4") 2 7 NLA - Spacer 4 8 NLA - Screw, Shoulder Hex Socket Head (/4 x ", 6 #0-24) 9 NLA - Screw, Shoulder Hex Socket Head (/4 x 2-3/4", #0-24) 0 NLA - Spacer (/4 x /2 x 5/32") 4 Screw, Hex Head w/ Patch (/4-20 x 3/4") 2 2 Washer (/4 x /2 x /6") 6 3 NLA - Bracket, Lower Vent Pivot, Black - Right 3 NLA - Bracket, Lower Vent Pivot, Black - Left 4 Washer, Nylon (25/64 x 7/8 x /32") 2 5 Screw, Socket Button (/4-20 x 3/4") 4 6 Locknut (/4-20) 5 7 NLA - Bracket, Vent Tray Hanger, Black 8 Washer, Flat (2/64 x 53/64 x 7/64") 9 Screw, Shoulder Hex Socket Head (5/6" x 3", /4-20) NOTE: A - Includes items 2-9. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06 also. Sold as a hardware kit only. A - To know when the hardware kit has been replaced, one of the hardware components (item 4) was revised from a Straight Pivot Tube to a Bent Pivot Tube assembly. 89

Vent Tray Mounting Hardware Conventional & Contoura Recline Only NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" 90

Vent Tray Mounting Hardware Conventional & Contoura Recline Only NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note Part Number Description Quantity Per Package Assembly A,A 2589-NLA NLA - Kit, Vent Tray Mounting Hardware For Conventional & Contoura Recline Only 2 Screw, Shoulder Hex Socket Head (5/6" x 3", /4-20) 3 Washer, Flat (2/64 x 53/64 x 7/64") 4 Washer, Nylon (25/64 x 7/8 x /32") 2 5 Locknut (/4-20) 6 NLA - Screw, Hex Head (3/8-6 x -/4") 2 7 NLA - Spacer (3/8 x 3/4 x 3/8") 2 8 Locknut, Low Profile (3/8-6) 4 9 NLA - Screw, Shoulder Hex Socket Head (/4 x ", 6 #0-24) 0 NLA - Spacer 4 NLA - Screw, Shoulder Hex Socket Head (/4 x 2-3/4", #0-24) 2 NLA - Screw, Shoulder Hex Socket Head (/2 x 2 2-3/4", 3/8-6) 3 Spacer, Nylon (/4 x 7/6 x /8") 4 4 NLA - Washer, Steel (7/8 x 3/8 x /6") 8 5 NLA - Locknut (#0-24) 8 6 Spacer, Nylon (/4 x 2 x 3/4") 2 7 NLA - Bracket, Lower Vent Mounting, Black 2 8 NLA - Vent Pivot Tube Assembly, Lower 2 9 Vent Pivot Tube Assembly, Bent 2 NOTE: A - Includes items 2-9. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06 also. Sold as a hardware kit only. A - To know when the hardware kit has been replaced, one of the hardware components (item 9) was revised from a Straight Pivot Tube to a Bent Pivot Tube assembly. 9

Vent Tray Mounting Hardware Conventional Tilt/Recline, (Contoura Tilt & T/R) & All T/R w/ BPO Option NOTE: When adding a Vent Tray Assembly in the field for the first time, refer to page titled "Accessories, Vent Tray Kits" Item Number Note Part Number Description Quantity Per Package Assembly A,A 25800-NLA Kit, Vent Tray Mounting Hardware For Conventional T/R, (Contoura Tilt & T/R) & All T/R w/ BPO Option 2 Screw, Shoulder Hex Socket Head (5/6" x 3", /4-20) 3 Washer, Flat (2/64 x 53/64 x 7/64") 4 Washer, Nylon (25/64 x 7/8 x /32") 2 5 Locknut (/4-20) 6 NLA - Screw, Shoulder Hex Socket Head (/4 x ", 6 #0-24) 7 NLA - Screw, Shoulder Hex Socket Head (/4 x 2-3/4", #0-24) 8 NLA - Spacer 4 9 NLA - Spacer (/4 x /2 x 5/32") 4 0 Spacer, Nylon (/4 x 2 x 3/4") 2 NLA - Washer, Steel (7/8 x 3/8 x /6") 8 2 NLA - Locknut (#0-24) 8 3 Washer (/4 x /2 x /6") 2 5 Screw, Hex Head w/ Patch (/4-20 x 3/4") 2 5 NLA - Bracket, Lower Vent Pivot, Black - Right 6 NLA - Bracket, Lower Vent Pivot, Black - Left 7 Vent Pivot Tube Assembly, Bent 2 8 NLA - Vent Pivot Tube Assembly, Lower 2 NOTE: A - Includes items 2-7. Vent Tray Mounting Hardware was revised after 4/2/06 and replaces all hardware used before 4/3/06 also. Sold as a hardware kit only. A - To know when the hardware kit has been replaced, one of the hardware components (item 5) was revised from a Straight Pivot Tube to a Bent Pivot Tube assembly. 93

Seat and Chest Positioning Straps without Mounting Hardware 94

Seat and Chest Positioning Straps without Mounting Hardware Positioning Straps Description 6"-9" Wide 20"-22" Wide 23"-24" Wide Auto Style Push Button Airline Style 00430 Strap, Positioning, Seat/Chest w/ Auto Style Push Button Buckle (Eyelet to Eyelet Length 48") 03475 Strap, Positioning, Seat/Chest w/ Airline Style Buckle (Eyelet to Eyelet Length 46") 034625 Strap, Positioning, Seat/Chest w/ Auto Style Push Button Buckle (Eyelet to Eyelet Length 6") 034752 Strap, Positioning, Seat/Chest w/ Airline Style Buckle (Eyelet to Eyelet Length 6") 034622-NLA NLA - Strap, Positioning, Seat/Chest w/ Auto Style Push Button Buckle (Eyelet to Eyelet Length 69") See Note(s) B 034753-NLA NLA - Strap, Positioning, Seat/Chest w/airline Style Buckle (Eyelet to Eyelet Length 70") Hook and Loop 034745 Strap, Positioning, Seat/Chest w/ Hook and Loop Style Buckle (Eyelet to Eyelet Length 6") 034745 Strap, Positioning, Seat/Chest w/ Hook and Loop Style Buckle (Eyelet to Eyelet Length 6") 034745 Strap, Positioning, Seat/Chest w/ Hook and Loop Style Buckle (Eyelet to Eyelet Length 6") NOTE: See Note(s) A See Note(s) A See Note(s) A A - Hook and Loop style positioning strap for power chairs is used for chest positioning only B - For replacement contact The Aftermarket Group (TAG). 95

Seat and Chest Positioning Straps Mounting Hardware 96

Seat and Chest Positioning Straps Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly A 24385 Kit, Seat Positioning Strap Mounting Hardware (both LT & RT sides) 2 Screw, Hex Head w/ Patch (/4-20 x 3/4") 2 3 Washer (/4 x /2 x /6") 2 4 Locknut (/4-20) 2 5 03760 Screw, Hex Head (/4-20 x -5/8") 2 6 025736 Locknut (/4-20) 2 7 B 09022 Kit, Chest Positioning Strap Mounting Hardware For Conventional Seating 8 T-Nut (/4-20) 2 9 Washer (/4 x 23/32 x /6") 2 0 Screw, Hex Head w/ Patch (/4-20 x /2") 2 C 026298 Package, Screw with Washer (#0 x 7/8") (Pair) 2 2 D 25798 Kit, Chest Positioning Strap's Mounting Hardware For Contoura Seating (both LT & RT sides) 3 Screw, Socket Button (/4-20 x 3/4") 6 4 Washer (/4 x /2 x /6") 6 5 Bracket, Positioning Strap, Black 2 6 Locknut (/4-20) 6 7 E 28732-NLA NLA - Package, Screw, Socket Button Head (/4-20 x 2") (Pair) 2 NOTE: A - Includes items 2-4 B - Includes items 8-0 C - The back upholstery and chest positioning strap share the same mounting hardware D - Includes items 3-6 E - Used for mounting chest positioning straps to solid straight back canes 97

Personal Back0 (TALL Regular/TALL Plus) Mounting Hardware Conventional Recline w/ BPO Option 98

Personal Back0 (TALL Regular/TALL Plus) Mounting Hardware Conventional Recline w/ BPO Option Item Number Note Part Number Description Quantity Per Package Assembly A 32748 Kit, Personal Back0 Tall Back Mounting Hardware 2 For Conventional Recline 6-20" Wide 2 Washer (/4 x /2 x /6") 4 3 Screw, Hex Head w/ Patch (/4-20 x /2") 4 4 Bracket, Personal Back0 Tall, For Conventional 2 Recline, Black (6-20" W) 5 T-Nut (/4-20) 4 A 3322 Kit, Personal Back0 Tall Back Mounting Hardware 2 For Conventional Recline 20-24" Wide 2 Washer (/4 x /2 x /6") 4 3 Screw, Hex Head w/ Patch (/4-20 x /2") 4 4 Bracket, Personal Back0 Tall, For Conventional 2 Recline, Black (20-24" W) 5 T-Nut (/4-20) 4 NOTE: A - Includes items 2-5 and is used for a Personal Back0 Tall (Regular or Plus) model only 99

Power Wheelchair Tool Kit 200

Item Number Note Part Number Description 25222-NLA Power Wheelchair Tool Kit NLA - Kit, Power Wheelchair Tool Includes: ea. Multimeter with Leads ea. Locator, Protractor/Angle Magnetic Base ea. Instructions, MKIV Programmer ea. Wire, Grounding with Hand Strap and Clip ea. Leads, " Test ea. Light, Pen with Invacare Logo ea. Tape Measure, Compact with Invacare Logo ea. Screwdriver, Pen-Size Phillips/Flat Head ea. Cable, Virtual Service Charger/Modem Quantity Per Package Assembly 20

Item Number Note Part Number Description NOTE: A A - Not Shown Miscellaneous Accessories Quantity Per Package Assembly 4076X00 Pump, Tire 202

Invacare Corporation www.invacare.com One Invacare Way Elyria, Oh USA 44036-225 800-333-6900 Technical Support 800-832-4707 Florida Technical Support 407-32-5630 Customer Service 800-333-6900 208 Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by and. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 8/2/8)