AC-Motors IGL/IGLU 13-740W housed ac-motors, with active cooling technical features compact, plain single- and three-phase motors UL-certification with the IGLU motors optimized heat dissipation by active ventilation higher power density from a smaller construction volume minimal losses lead to optimum efficiency energy saving compared with standard motors smooth and easy-to-clean design suitable for critical application of protection IP 54 or IP 5 / thermal class F compatible with all Groschopp gearboxes and basically for all other gearboxes from other manufacturers standard on three phases with operating capacitors on 1x2V, and to use with a 1x2V-inverter drives. 3x400V inverter drive with optional phase phase insulation Certifications and Labels: options: e.g. brakes, thermal sensor, encoder systems 2- and 4-pole drives The IGK/IGL series are convincing due to their new efficient design. Evidence are the higher power density and the improve heat dissipation in comparison with their ancestors. poge 1 from 7
available s with performance data Type rated power [IGL/-U] P2 W rel. start rel. breakdown W Mstart/M Mtilt /M rated current input power n M Iy P1 r.p.m. Ncm A speed power factor capacitor % cos( φ) μf efficiency ηη C 2-poles (approx. 2800 r.p.m.) preferred s 5-40 5 2 23,7 0, 1 1,87 1,83 52,0 0,71 72 0,58 3 1,85 1,71 0,7 270 2700 10 0,80 454 2,00 1,89,0 1 additional s 5-9,1 0,17 70,7 1,75 1,92 3,0 0,71 3 5-0 115 270,2 0,40 1,97 1,89 57,5 0,72 8 80-70, 0, 132 1,8 1,80 52,9 0,7 4,5 400 2700 1,00 58 70,4 0 89,9 0,4 372 1,7 1,83 7,1 0,84 4 2750 7 1,10 579 2,2 7 7 0,7 580 2800 198 1, 757 7,7 0,84-40 400 27 0 0,94 53 1,3 2,00 71,1-0 580 2800 198 1,37 73 2, 2,78 7,0 0,80-80 740 2800 2 1,3 940 2,28 2,84 78,7 0,83 40 4-poles (approx. 00 r.p.m.) preferred s 5-40 1,0 0,1 78,0 1,5 1,75 32,0 0,9 4 110 10 81,3 0,43 210 1,85 1,83 52,4 0,71 10-80 400 1380 277 1,0 544 1,90 2,08 73,5 0,74 additional s 5-13 10 9,70 52,8 1,77 1,77,0 0,70 3 5-0 40 10,0 0,22 95,5 1,8 1,8,8 0,2 4,5 80-40 13 29,1 0,23 1,89 1,8 40,0 155 10 1 0,58 270 2,08 2,08 57,4 1340 3 0,70 338 2,37 2,37 59,2 0,70 150 13 108 0,50 7 1,5 1,75 58,5 0,74 1375 0 0, 311 2,18 2, 4,3 275 13 42 2,15 2,1 4,5 0,75-40 210 130 7 0,5 33 1,3 1,7 0,75-0 310 130 248,0 0,87 457 1,73 1,88 7,8 0,7 poge 2 from 7
technical information motor technology 2- or 4-pole AC-induction motors Standard on three phases or with operating capacitors on 1x2V, and to use with a 1x2V-inverter drives. 3x400V inverter drive with optional phase Phase insulation. connection star/delta: 400/2V power output range 9 to 740W insulation class F (max. winding temperature 155 C) housing aluminum continuous casting, bearing shield aluminum pressure casting B3/B or with screw foot protection [1] IP54 of cooling ventilated, designed for continuous operation, ED=% connection System terminal box (terminal board with bolts) painting RAL 5002, ultramarine blue, semi-gloss terminal box K3, plastic, with cable gland, 2x PG11 AK2, aluminum, with cable gland, 2x M [1] Information about the protection of motors relate to the assembled state with gearboxes. The of protection is for the electronic equipment. Protection s of gearboxes are to be requested separately. Options electrical special voltage and speed increased for a short period of time strengthened phase insulation for operating on a 3x400 drive inverter mounted inverter MFR mechanical special design for your requirements are possible brakes 24VDC or 5VDC (from terminal box with integrated commutator) encoder System encoder, resolver, speed generator temperature monitoring heat monitor with NC-contact or triple-ptc protection [1] up to IP5 possible (due to permanently elastic or O-ring at the bearing shield) painting special painting coating surface coating, e.g. Hard-Coat, SilaCoat, DurniCoat certifications CE terminal box K3E plastic, EMC conform with screw connection 2x PG11 (dimension drawing of the terminal boxes are given later in this data sheet) [1] Information about the protection of motors relate to the assembled state with gearboxes. The of protection is for the electronic equipment. Protection s of gearboxes are to be requested separately. poge 3 from 7
technical drawing and dimension (with terminal-box AK2) (Our preferred s are basically mechanically prepared for attaching to our gearboxes. Therefore the shaft- and flangedimensions differ from the drawings above. For requests without gearboxes we do ask for a separate consultation.) IGL IGLU a b c d e k l m n o p q r s t u v w x y z mass --- 45 M4 73 74 92 5 35 18,5 54 80 5,8 70 95 1 4,5 45 119 1,7 5-7 23,5 24 5-40 7 28,5 2,2 5-0 17 1 38,5 2,7 80-1 9,5 150 9,5 22 2,7 170 19,5 32 3,4 190 189,5 157,5 157 177,5 177 197,5 197-40 13 1-0 183 18 28 5,3-80 3 38 24 9 32 i B 23,5 33 h B3 9 B g B --- B3 f B3 33 kg 50 81 5 M5 90 8 110 44 71 90 5,8 88 105 1 5 5 138,5 42 2 27 11 42 0 91 75 M5 87,5 3 44,5 21 4,2 80 7 102 1 21 3 150,5 31 34 42 70 101 85 M 1 93,5 137 4 18 3,4 4,3 33,5 2,0 5,2 90 1 7 115 135 23,5 7 71 14,5 poge 4 from 7 4,3
available flanges and shafts flange- and shaft-dimensions for attaching to gearboxes: VE31, Z3, Z5, Z10, Z, Z d [mm] IGL/-U 8 5 10 80/90 poge 5 from 7
optional brakes technical information (with spring-loaded brake) braking voltage current [IGL/-U] [Nm] [VDC] [A] dimension for a* for ab mass [mm] [kg] B3 [mm] B [mm] 14 13,5 184 183,5 5-0 4 3,5 3,0 80-182 181,5 3,2 2 1,5 3,9 222 221,5 4, 242 5,4 9,5 9 229,5 229 5-5-40 1,0 0,0 5,0 5 5,0 2,0 47 52 4,7 5, 249,5 249-40 215 tbd 5 234,5 tbd 5 4,5 tbd -0 5,0-80 *data for 24 V DC, brakes only on request. Attention: motor with braking option only comes with terminal box AK2. poge from 7
available terminal boxes K3/-E AK2 connections design 3 phases 1 phase (Steinmetz) standard motor star with brakes and commutator triangle star triangle poge 7 from 7