Global technology leader in the manufacture of wire and fibre rope solutions for the world s most demanding applications

Oil and Gas

Global technology leader in the manufacture of wire and fibre rope solutions for the world s most demanding applications Bridon Neptune Quay, a state-of-the-art manufacturing facility that makes the largest and most complex high performance ropes in the world for offshore Oil & Gas applications. Bridon Technology Centre (BTC), a world leading centre of excellence for rope technology development, testing & verification. To find out more please visit www.bridon.com/neptune www.bridon.com/btc Bridon Neptune Quay Bridon Technology Centre An essential Engineer s reference guide for the selection, use and retirement of rope, get the Bridon BlueBook App now.

Total Supply Solutions Bridon is a world leader in the design, manufacture, development and supply of specialist ropes to meet the needs of the oil and gas industry. To complement our extensive range of high performance products we provide flexible service solutions to help you get the optimum performance from your ropes. Selection & specification Rope record management Storage & transport Guidance on discard & feedback Expert support for all stages of rope selection use and discard. Learn more Installation www.bridon.com/services Tensile testing Maintenance Inspection & examination

Offshore Pedestal Crane Ropes n Main Hoist & n Auxiliary Hoist Ropes 34LR High Performance Crane Ropes Dyform 34LR multi-strand ropes are recommended for high lifting operations. Exceptional 'low rotational' properties and a high steel fill factor provides high strength, crush resistance, improved fatigue performance and low stretch. High performance offshore crane ropes from Bridon, a brand proven in the most demanding global Oil & Gas applications. Low rotation engineered rope High strength Reduced rope sheave wear Accurate diameter for multi-layer coiling Long service life, reduced down time Crush resistant Ideal for single-part & multi-part reeving This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

34LR Main & Auxiliary Hoist Ropes Rope Diameter Approx. nominal length mass EIPS / 1960 grade Minimum Breaking Force (Fmin) EEIPS / 2160 grade Axial stiffness @20% load Torque generated @20% load Ordinary Lang s Metallic cross section mm kg/m kn Tonnes kn Tonnes MN N.m N.m mm 2 Dyform 34x7 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 35 36 38 40 42 44 46 48 50 0.50 0.61 0.72 0.85 0.98 1.13 1.28 1.45 1.62 1.81 2.00 2.21 2.42 2.65 2.88 3.13 3.38 3.65 3.92 4.21 4.50 5.12 5.78 6.13 6.48 7.22 8.00 8.82 9.68 10.6 11.5 12.5 92.1 111 133 156 181 207 236 266 298 333 368 406 446 487 531 576 623 672 722 775 829 939 1060 1124 1189 1325 1468 1618 1776 1941 2113 2293 9.39 11.4 13.5 15.9 18.4 21.1 24.0 27.1 30.4 33.9 37.6 41.4 45.4 49.7 54.1 58.7 63.5 68.5 73.6 79.0 84.5 95.7 108 115 121 135 150 165 181 198 215 234 96.7 117 139 163 190 218 248 279 313 349 387 426 468 511 557 604 654 705 758 813 870 990 9.9 11.9 14.2 16.7 19.3 22.2 25.2 28.5 31.9 35.6 39.4 43.5 47.7 52.1 56.8 61.6 66.6 71.9 77.3 82.9 88.7 101 Not applicable in Dyform 34x19 these sizes 5.8 7.0 8.3 9.7 11 13 15 17 19 21 23 25 28 30 33 36 39 42 45 48 52 59 67 70 75 83 92 101 111 122 133 144 1.5 2.0 2.5 3.2 4.0 5.0 6.0 7.2 8.6 10 12 14 16 18 20 23 26 29 32 36 40 48 58 63 68 81 94 109 125 143 162 183 3.3 4.4 5.7 7.3 9.1 11 14 16 19 23 27 31 35 40 46 52 58 65 73 81 90 108 130 142 154 181 211 245 281 321 365 413 58 70 84 98 114 131 149 168 188 210 232 256 281 307 335 363 393 424 456 489 523 595 672 712 753 839 930 1025 1125 1230 1339 1453 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Pedestal Crane Ropes n Main Hoist & n Auxiliary Hoist Ropes 34LR PI High Performance Crane Ropes Dyform 34LR PI multi-strand ropes are recommended for high lifting operations. Exceptional 'low rotational' properties and a high steel fill factor provides high strength, crush resistance and low stretch. The engineered polymer core further enhances fatigue performance beyond that of the standard 34LR. Premium quality offshore crane ropes from Bridon, a brand proven in the most demanding global Oil & Gas applications. Low rotation engineered rope High strength Reduced rope sheave wear Accurate diameter for multi-layer coiling Long service life, reduced down time Crush resistant Ideal for single-part & multi-part reeving Improved fatigue resistance Corrosion protected core This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

34LR PI Main & Auxiliary Hoist Ropes Rope Diameter Approx. nominal length mass EIPS / 1960 grade Minimum Breaking Force (Fmin) EEIPS / 2160 grade Axial stiffness @20% load Torque generated @20% load Ordinary Lang s Metallic cross section mm kg/m kn Tonnes kn Tonnes MN N.m N.m mm 2 Dyform 34x7 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 34 35 36 38 40 Dyform 34x19 42 44 46 48 50 0.50 0.61 0.72 0.85 0.98 1.13 1.28 1.45 1.62 1.81 2.00 2.21 2.42 2.65 2.88 3.13 3.38 3.65 3.92 4.21 4.50 5.12 5.78 6.13 6.48 7.22 8.00 8.82 9.68 10.6 11.5 12.5 92.1 111 133 156 181 207 236 266 298 333 368 406 446 487 531 576 623 672 722 775 829 939 1060 1124 1189 1325 1468 1618 1776 1941 2113 2293 9.39 11.4 13.5 15.9 18.4 21.1 24.0 27.1 30.4 33.9 37.6 41.4 45.4 49.7 54.1 58.7 63.5 68.5 73.6 79.0 84.5 95.7 108 115 121 135 150 165 181 198 215 234 96.7 117 139 163 190 218 248 279 313 349 387 426 468 511 557 604 654 705 758 813 870 990 9.9 11.9 14.2 16.7 19.3 22.2 25.2 28.5 31.9 35.6 39.4 43.5 47.7 52.1 56.8 61.6 66.6 71.9 77.3 82.9 88.7 101 Not applicable in these sizes 5.8 7.0 8.3 9.7 11 13 15 17 19 21 23 25 28 30 33 36 39 42 45 48 52 59 67 70 75 83 92 101 111 122 133 144 1.5 2.0 2.5 3.2 4.0 5.0 6.0 7.2 8.6 10 12 14 16 18 20 23 26 29 32 36 40 48 58 63 68 81 94 109 125 143 162 183 3.3 4.4 5.7 7.3 9.1 11 14 16 19 23 27 31 35 40 46 52 58 65 73 81 90 108 130 142 154 181 211 245 281 321 365 413 58 70 84 98 114 131 149 168 188 210 232 256 281 307 335 363 393 424 456 489 523 595 672 712 753 839 930 1025 1125 1230 1339 1453 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore winches and single fall cranes Plus n Main Hoist n Whip line n Winch Line High Performance Ropes HydraPlus, the next generation of precision engineered multistand ropes deliver exceptional low rotation performance and provide the highest strength to diameter ratio within the Hydra range. Ideal for the large capacity multi-layer winching arrangements typical to sophisticated offshore heavy-lift cranes and subsea deployment winches, the robust Dyform construction provides high radial stiffness and superior crush resistance. Excellent multi-layer spooling characteristics and resistance to crushing are essential for reliable rope performance in these applications where load is applied directly to the reeled rope on its storage winch which can create considerable radial forces, crushing the underlying lower layers. The right rope lubrication is vital to reliable performance, that s why we tailor the lubrication applied in the manufacture of our Hydra range to deliver optimum lubrication over a wide range of operating temperatures including elevated temperatures typical to heave compensation systems. High performance offshore heavy-lift and subsea deployment ropes from Bridon, a brand proven in the most demanding global Oil & Gas applications. Maximum strength to diameter ratio Tailored lubrication Low rotation Reduced elongation Superior crush resistance Long service life This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Plus Low rotation, Winch plus Main Hoist & Auxiliary Hoist Ropes Rope diameter In air Approximate mass Submerged Minimum breaking force (Fmin) Axial stiffness @20% load Torque generated @20% load Lang s lay Metallic cross section mm kg/m kg/m kn Tonnes MN N.m mm 2 *50 52 54 56 58 60 62 63.5 66 72 76 82.6 88.9 90 96 100 102 109 115 121 128 132 135 138 142 148 152 160 170 180 > 12.5 13.5 14.6 15.5 16.8 18.0 19.3 20.2 21.8 26.0 28.9 33.2 38.4 39.4 44.8 48.6 50.6 57.7 64.2 71.2 79.6 84.7 88.6 92.6 98.4 106.9 112.8 124.9 141.0 158.1 11.1 11.9 12.9 13.7 14.9 15.9 17.1 17.9 19.3 23.0 25.6 29.4 34.0 34.9 39.6 43.0 44.8 51.0 56.8 63.0 70.4 74.9 78.4 81.9 87.1 94.6 99.8 110.5 124.8 139.9 2296 2482 2678 2845 3021 3237 3463 3639 3924 4621 5150 5808 6661 6818 7760 8339 8731 9810 10693 11821 13244 14028 15009 15304 16187 17658 18786 20307 22906 25702 234 253 273 290 308 330 353 371 400 471 525 592 679 695 791 850 890 1000 1090 1205 1350 1430 1530 1560 1650 1800 1915 2070 2335 2620 161 174 188 199 216 232 247 260 280 334 372 426 494 506 576 625 650 743 827 915 1024 1089 1139 1190 1264 1373 1448 1605 1811 2031 689 774 868 956 1051 1165 1288 1387 1554 1996 2349 2878 3553 3682 4470 5003 5343 6416 7378 8582 10171 11110 12158 12671 13791 15680 17133 19494 23364 27758 1399 1514 1632 1730 1880 2015 2152 2257 2438 2902 3233 3708 4295 4402 5009 5435 5655 6457 7187 7957 8905 9470 9905 10350 10990 11940 12593 13953 15752 17660 180 Please contact Bridon for further details Figures represent the typical product range manufactured in accordance with EN12385 to diameter tolerance 0 to +5%. Bridon manufacture to custom specifications and can offer tighter diameter tolerances on request. Multi-strand rope rotation typically 3%, lower rotation characteristics available on request, please contact Bridon. *For smaller diameter ropes, please refer to 34LR & 34LR PI in the Oil and Gas brochure.

Big n Offshore single layer traction winches High Performance Ropes The Big Hydra is the original deepwater deployment rope for Single-layer offshore deployment winches and offers an optimised strength to weight ratio. Increasing deployment depths mean that the impact of suspended rope weight can severely reduce available winch capacity. The Big Hydra provides excellent strength to weight ratio to maximise winch capacity for single layer traction winch applications including pipelay abandonment & recovery equipment. The right rope lubrication is vital to reliable performance, that s why we tailored the lubrication used in the manufacture of our Hydra range to deliver optimum lubrication over a wide range of operating temperatures including elevated temperatures typical to heave compensation systems. Premium quality low-rotation, multi-strand ropes for demanding Oil & Gas applications, Bridon the benchmark for reliability. Optimised strength to weight ratio Tailored lubrication Low rotation Long service life This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Big Low rotation, single layer traction winch rope Rope diameter Approximate mass In air Submerged Minimum breaking force (Fmin) Axial stiffness @20% load Torque generated @20% load Lang s lay Metallic cross section mm kg/m kg/m kn Tonnes MN N.m mm 2 80 83 88.9 96 102 108 109 115 128 138.5 29.0 30.1 35.8 41.7 46.6 52.8 53.0 60.0 73.8 84.7 25.2 26.6 31.1 36.3 41.2 45.9 46.9 53.1 65.3 75.0 5,024 5,150 6,204 7,235 8437 9156 9320 10791 12753 14911 512 525 632 737 860 933 950 1100 1300 1520 348 376 430 502 572 635 651 736 906 1038 2411 2565 3307 4164 5163 5931 6095 7446 9794 12391 3167 3419 3911 4560 5199 5771 5918 6688 8233 9439 Big (Dyform) Low rotation, single layer traction winch rope Rope diameter In air Approximate mass Submerged Minimum breaking force (Fmin) Axial stiffness @20% load Torque generated @20% load Lang s lay Metallic cross section mm kg/m kg/m kn Tonnes MN N.m mm 2 76 77 80 83 88.9 96 106 109 120 122 128 27.4 28.8 29.9 32.4 37.5 44.1 52.3 55.5 66.1 70.8 78.3 24.3 25.5 26.5 28.7 33.2 39.2 46.3 49.1 58.5 62.7 69.3 5003 5140 5199 5572 6180 7455 8829 9613 11036 12262 13145 510 524 530 550 630 760 900 980 1125 1250 1340 335 354 366 396 459 548 641 680 810 865 958 2281 2375 2496 2687 3297 4294 5615 6287 7946 8976 10096 3049 3220 3329 3600 4170 4978 5826 6185 7366 7864 8705 Figures represent the typical product range manufactured in accordance with EN12385 to diameter tolerance 0 to +5%. Bridon manufacture to custom specifications and can offer tighter diameter tolerances on request. Multi-strand rope rotation typically 3%, lower rotation characteristics available on request, please contact us.

Offshore Pedestal Crane Ropes n Boom Hoists n Boom Pendants 6 High Performance Crane Ropes Dyform Bristar 6 ropes are recommended for Boom hoist & Pendant applications. The Dyform construction is ideal for Boom hoist and Pendant applications providing superior crush resistance with low stretch. The unique Bristar core further enhances fatigue performance beyond that of the standard Dyform 6 Premium quality offshore crane ropes from Bridon, a brand proven in the most demanding global Oil & Gas applications. Enhanced bend fatigue High breaking force Consistent performance Superior crush resistance Accurate diameter tolerance Long life, reduced lifetime costs Reduced stretch Corrosion protected core Recommended for multi-layer coiling This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

6 Boom Hoists and Boom Pendants Rope Diameter Nominal rope length mass (M) 1770 grade Minimum Breaking Force (Fmin) 1960 grade Minimum Breaking Force (Fmin) 2160 grade Axial Stiffness at 20% Load Nominal metallic cross-sectional area (A) mm in kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons kn Tonnes Tons MN Mlbs mm 2 in 2 6x36WS 16 17 18 19 19.1 20 22 22.2 24 25.4 26 28 28.6 30 31.8 32 34 34.9 36 38 38.1 40 3/4 7/8 1 1.1/8 1.1/4 1.3/8 1.1/2 1.17 1.33 1.49 1.66 1.67 1.84 2.22 2.26 2.64 2.96 3.10 3.60 3.75 4.13 4.64 4.70 5.30 5.59 5.95 6.63 6.66 7.34 0.79 0.89 1.00 1.11 1.12 1.23 1.49 1.52 1.77 1.99 2.08 2.42 2.52 2.77 3.12 3.15 3.56 3.75 3.99 4.45 4.47 4.93 191 216 242 270 273 299 362 368 431 482 505 586 611 673 756 765 864 910 969 1079 1085 1196 19.5 22.0 24.7 27.5 27.8 30.5 36.9 37.6 43.9 49.2 51.5 59.7 62.3 68.6 77.1 78.0 88.1 92.8 98.7 110.0 110.6 121.9 21.5 24.3 27.2 30.3 30.6 33.6 40.7 41.4 48.4 54.2 56.8 65.9 68.7 75.6 85.0 86.0 97.1 102 109 121 122 134 212 239 268 299 302 331 401 408 477 534 560 649 677 745 837 848 957 1008 1073 1195 1202 1324 21.6 24.4 27.3 30.5 30.8 33.7 40.8 41.6 48.6 54.4 57.0 66.1 69.0 75.9 85.3 86.4 97.5 103 109 122 122 135 23.8 26.9 30.1 33.6 33.9 37.2 45.0 45.9 53.6 60.0 62.9 72.9 76.1 83.7 94.1 95.3 108 113 121 134.34 135.05 148.86 230 260 291 324 328 359 435 443 518 580 607 704 735 809 909 920 1039 1094 1165 1298 1304 1438 23.4 26.5 29.7 33.1 33.4 36.6 44.3 45.1 52.8 59.1 61.9 71.8 74.9 82.4 92.6 93.8 106 112 119 132 133 147 25.9 29.2 32.7 36.5 36.8 40.4 48.9 49.8 58.2 65.2 68.3 79.2 82.6 90.9 102 103 117 123 131 146 147 162 13.9 15.7 17.6 19.6 19.8 21.7 26.2 26.7 31.2 35.0 36.6 42.5 44.3 48.8 54.8 55.5 62.7 66.0 70.2 78.3 78.7 86.7 3.06 3.45 3.87 4.31 4.36 4.78 5.78 5.89 6.88 7.71 8.08 9.37 9.8 10.8 12.1 12.2 13.8 14.6 15.5 17.3 17.3 19.1 135 152 170 190 192 210 255 259 303 339 356 413 430 474 532 539 608 641 682 760 764 842 0.209 0.236 0.264 0.294 0.298 0.326 0.395 0.402 0.470 0.526 0.551 0.639 0.667 0.734 0.825 0.835 0.943 0.993 1.057 1.178 1.184 1.305 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For larger diameters see Bristar 6 XL

Offshore Pedestal Crane Ropes n Boom Hoists n Boom Pendants 8 High Performance Crane Ropes Dyform Bristar 8 ropes are recommended for Boom hoist & Pendant applications. The Dyform construction is ideal for Boom hoist and Pendant applications providing superior crush resistance with low stretch. The unique Bristar core further enhances fatigue performance beyond that of the standard Dyform 8 Premium quality offshore crane ropes from Bridon, a brand proven in the most demanding global Oil & Gas applications. High breaking force Flexible eight strand construction High temperature lubricant Consistent performance Enhanced bend fatigue Superior crush resistance Accurate diameter tolerance Long life, reduced lifetime costs Reduced stretch Corrosion protected core Recommended for multi-layer coiling This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

8 Boom Hoists and Boom Pendants Rope Diameter Approx. mass In air EIPS / 1960 grade Minimum Breaking Force (Fmin) 2160 grade Axial Stiffness at 20% Load Torque Generated at 20% Load Ordinary Lang s Metallic cross section mm in kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons MN Mlbs N.m lbs/ft N.m lbs/ft mm2 in 2 16 17 18 19 19.1 20 22 22.2 24 25.4 26 28 28.6 30 31.8 3/4 7/8 1 1 1/8 1 1/4 1.20 1.36 1.52 1.70 1.72 1.88 2.28 2.32 2.71 3.04 3.18 3.69 3.85 4.23 4.76 0.81 0.91 1.02 1.14 1.15 1.26 1.53 1.56 1.82 2.04 2.14 2.48 2.59 2.84 3.20 226 255 286 318 322 353 427 435 508 569 596 691 721 794 892 23.0 26.0 29.1 32.5 32.8 36.0 43.5 44.3 51.8 58.0 60.8 70.5 73.5 80.9 90.9 25.4 28.6 32.1 35.8 36.1 39.6 48.0 48.8 57.1 63.9 67.0 77.7 81.0 89.2 100 236 267 299 333 336 369 446 455 531 595 623 723 754 830 933 24.1 27.2 30.5 33.9 34.3 38 45.5 46.3 54.2 60.7 63.6 73.7 76.9 84.6 95.1 26.5 29.9 33.6 37.4 37.8 41.4 50.1 51.1 59.7 66.8 70.0 81.2 84.7 93.2 105 26.5 29.9 33.6 37.4 37.8 41.4 50.1 51.1 59.7 66.8 70.0 81.2 84.7 93.2 105 3.1 3.5 3.9 4.3 4.4 4.8 5.8 5.9 6.9 7.7 8.1 9.4 10 11 12 51 61 72 85 86 99 131 135 171 202 217 271 289 333 397 37 45 53 62 63 73 97 100 126 149 160 200 213 246 293 65 78 93 109 111 127 169 174 219 260 279 349 371 429 511 48 58 68 80 82 94 125 128 162 192 206 257 274 316 376 137 154 173 193 195 214 258 263 308 345 361 419 437 481 540 0.212 0.239 0.268 0.299 0.302 0.331 0.401 0.408 0.477 0.534 0.560 0.649 0.677 0.745 0.837 32 34 34.9 36 38 38.1 40 42 44 46 48 50 1 3/8 1 1/2 4.82 5.44 5.73 6.10 6.79 6.83 7.53 8.30 9.11 9.95 10.8 11.8 3.24 3.65 3.85 4.10 4.56 4.59 5.06 5.58 6.12 6.69 7.28 7.90 903 1020 1074 1143 1274 1280 1411 1556 1708 1866 2032 2205 92.1 104 110 117 130 131 144 159 174 190 207 225 101 115 121 128 143 144 159 175 192 210 228 248 944 1066 1123 1195 1332 1339 1476 1627 1786 1952 2125 2306 96.3 109 115 122 136 136 150 166 182 199 217 235 106 120 126 134 150 150 166 183 201 219 239 259 106 120 126 134 150 150 166 183 201 219 239 259 12 14 15 16 17 17 19 21 23 25 28 30 405 485 525 576 678 683 790 915 1052 1202 1366 1544 298 358 387 425 500 504 583 675 776 886 1007 1138 520 624 675 741 871 878 1016 1176 1352 1545 1756 1985 384 460 498 546 642 647 749 867 997 1139 1295 1463 547 617 650 692 771 775 854 942 1034 1130 1230 1335 0.848 0.957 1.01 1.07 1.20 1.20 1.32 1.46 1.60 1.75 1.91 2.07 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For larger diameters see Bristar 6 XL

Offshore Pedestal Crane Ropes n Boom Hoists n Boom Pendants 6 High Performance Crane Ropes Dyform 6 ropes are recommended for Boom hoist & Pendant applications. The Dyform construction is ideal for Boom hoist and Pendant applications providing superior crush resistance with low stretch. Premium quality offshore crane ropes from Bridon, a brand proven in the most demanding global Oil & Gas applications. Superior crush resistance Accurate diameter tolerance Long life, reduced lifetime costs Premium quality Corrosion resistant Reduced stretch This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

6 Boom Hoists and Boom Pendants Rope Diameter Nominal rope length mass (M) 1770 grade Minimum Breaking Force (Fmin) 1960 grade Minimum Breaking Force (Fmin) 2160 grade Axial Stiffness at 20% Load Nominal metallic cross-sectional area (A) mm in kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons kn Tonnes Tons MN Mlbs mm 2 in 2 6x36WS 16 17 18 19 19.1 20 22 22.2 24 25.4 26 28 28.6 30 31.8 32 34 34.9 36 38 38.1 40 3/4 7/8 1 1.1/8 1.1/4 1.3/8 1.1/2 1.17 1.33 1.49 1.66 1.67 1.84 2.22 2.26 2.64 2.96 3.10 3.60 3.75 4.13 4.64 4.70 5.30 5.59 5.95 6.63 6.66 7.34 0.79 0.89 1.00 1.11 1.12 1.23 1.49 1.52 1.77 1.99 2.08 2.42 2.52 2.77 3.12 3.15 3.56 3.75 3.99 4.45 4.47 4.93 191 216 242 270 273 299 362 368 431 482 505 586 611 673 756 765 864 910 969 1079 1085 1196 19.5 22.0 24.7 27.5 27.8 30.5 36.9 37.6 43.9 49.2 51.5 59.7 62.3 68.6 77.1 78.0 88.1 92.8 98.7 110.0 110.6 121.9 21.5 24.3 27.2 30.3 30.6 33.6 40.7 41.4 48.4 54.2 56.8 65.9 68.7 75.6 85.0 86.0 97.1 102 109 121 122 134 212 239 268 299 302 331 401 408 477 534 560 649 677 745 837 848 957 1008 1073 1195 1202 1324 21.6 24.4 27.3 30.5 30.8 33.7 40.8 41.6 48.6 54.4 57.0 66.1 69.0 75.9 85.3 86.4 97.5 103 109 122 122 135 23.8 26.9 30.1 33.6 33.9 37.2 45.0 45.9 53.6 60.0 62.9 72.9 76.1 83.7 94.1 95.3 108 113 121 134.34 135.05 148.86 230 260 291 324 328 359 435 443 518 580 607 704 735 809 909 920 1039 1094 1165 1298 1304 1438 23.4 26.5 29.7 33.1 33.4 36.6 44.3 45.1 52.8 59.1 61.9 71.8 74.9 82.4 92.6 93.8 106 112 119 132 133 147 25.9 29.2 32.7 36.5 36.8 40.4 48.9 49.8 58.2 65.2 68.3 79.2 82.6 90.9 102 103 117 123 131 146 147 162 13.9 15.7 17.6 19.6 19.8 21.7 26.2 26.7 31.2 35.0 36.6 42.5 44.3 48.8 54.8 55.5 62.7 66.0 70.2 78.3 78.7 86.7 3.06 3.45 3.87 4.31 4.36 4.78 5.78 5.89 6.88 7.71 8.08 9.37 9.8 10.8 12.1 12.2 13.8 14.6 15.5 17.3 17.3 19.1 135 152 170 190 192 210 255 259 303 339 356 413 430 474 532 539 608 641 682 760 764 842 0.209 0.236 0.264 0.294 0.298 0.326 0.395 0.402 0.470 0.526 0.551 0.639 0.667 0.734 0.825 0.835 0.943 0.993 1.057 1.178 1.184 1.305 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Drilling Lines Steel core Class 6x19 (Metric) incl. 6x19S, 6x19W, 6x21F, 6x26WS, 6x25F Premium Quality Drilling Lines Bridon's Steel core drilling line products are robust and offer excellent abrasion and fatigue resistance to optimise performance on winches and sheaves. A proprietary blocking and lubrication medium provides corrosion resistance with the additional protection of a drawn galvanised finish. High quality six strand crane rope Excellent resistance to wear Fully lubricated Steel Core Corrosion resistant Good ton-mile performance Premium quality drilling lines for demanding Oil & Gas applications, Bridon the benchmark for reliability. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Steel core Class 6x19 to API 9A (Metric) Drilling Lines Rope Dia Nominal rope length mass (M) 1770 grade Minimum Breaking Force (Fmin) 1960 grade 2160 grade Axial Stiffness at 20% Load Nominal metallic cross-sectional area (A) mm kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons kn Tonnes Tons MN Mlbs mm2 in 2 10 11 12 13 14 16 18 19 20 22 24 26 28 32 0.40 0.48 0.58 0.68 0.78 1.02 1.30 1.44 1.60 1.94 2.30 2.70 3.14 4.10 0.60 0.72 0.86 1.01 1.17 1.53 1.93 2.15 2.38 2.88 3.43 4.03 4.67 6.10 63.0 76.2 90.7 106 124 161 204 227 252 305 363 426 494 645 6.42 7.77 9.25 10.9 12.6 16.4 20.8 23.2 25.7 31.1 37.0 43.4 50.4 65.8 7.08 8.57 10.2 12.0 13.9 18.1 22.9 25.6 28.3 34.3 40.8 47.9 55.5 72.5 69.8 84.4 100 118 137 179 226 252 279 338 402 472 547 715 7.11 8.61 10.2 12.0 13.9 18.2 23.0 25.7 28.5 34.4 41.0 48.1 55.8 72.8 7.84 9.49 11.3 13.3 15.4 20.1 25.4 28.3 31.4 38.0 45.2 53.0 61.5 80.3 76.9 93.0 111 130 151 197 249 278 308 372 443 520 603 787 7.84 9.48 11.3 13.2 15.4 20.1 25.4 28.3 31.4 37.9 45.1 53.0 61.5 80.3 8.64 10.5 12.4 14.6 16.9 22.1 28.0 31.2 34.6 41.8 49.8 58.4 67.8 88.5 4.67 5.65 6.72 7.89 9.15 12.0 15.1 16.9 18.7 22.6 26.9 31.6 36.6 47.8 1.03 1.25 1.48 1.74 2.02 2.64 3.34 3.72 4.12 4.98 5.93 6.96 8.07 10.54 45 54 65 76 88 115 145 162 180 217 259 304 352 460 0.070 0.084 0.100 0.118 0.136 0.178 0.225 0.251 0.278 0.337 0.401 0.470 0.546 0.713 36 38 40 44 48 52 56 60 5.18 5.78 6.40 7.74 9.22 10.8 12.5 14.4 7.72 8.60 9.53 11.5 13.7 16.1 18.7 21.4 817 910 1008 1220 1452 1704 1976 2268 83.2 92.8 103 124 148 174 201 231 91.8 102 113 137 163 192 222 255 904 1008 1116 1351 1608 1887 2188 2512 92.2 103 114 138 164 192 223 256 102 113 125 152 181 212 246 282 997 1110 1230 1489 1772 2079 2411 2768 102 113 125 152 181 212 246 282 112 125 138 167 199 234 271 311 60.5 67.4 74.7 90.4 108 126 146 168 13.34 14.87 16.47 19.93 23.72 27.84 32.29 37.06 582 648 718 869 1034 1214 1408 1616 0.902 1.005 1.114 1.347 1.603 1.882 2.183 2.505 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Drilling Lines Steel core Class 6x19 (imperial) incl. 6x19S, 6x19W, 6x21F, 6x26WS, 6x25F, 6x31WS, 6x36WS, 6x41WS, 6x46WS, 6x49WS Premium Quality Drilling Lines Bridon's Steel core drilling line products are robust and offer excellent abrasion and fatigue resistance to optimise performance on winches and sheaves. A proprietary blocking and lubrication medium provides corrosion resistance with the additional benefit of a drawn galvanised finish. High quality six strand crane rope Excellent resistance to wear Fully lubricated Steel Core Corrosion resistant Good ton-mile performance Premium quality drilling lines for demanding Oil & Gas applications, Bridon the benchmark for reliability. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Steel core Class 6x19 to API 9A (Imperial) Drilling Lines Rope Diameter Nominal rope length mass (M) IPS grade Minimum Breaking Force (Fmin) EIPS grade EEIPS grade Axial Stiffness at 20% Load Nominal metallic cross-sectional area (A) in mm kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons kn Tonnes Tons MN Mlbs mm 2 in 2 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1.1/8 1.1/4 1.3/8 1.1/2 1.5/8 1.3/4 1.7/8 2 2.1/8 2.1/4 9.5 11.1 12.7 14.3 15.9 19.1 22.2 25.4 28.6 31.8 34.9 38.1 41.3 44.5 47.6 50.8 54 57.2 0.39 0.52 0.69 0.86 1.07 1.55 2.10 2.76 3.49 4.30 5.20 6.20 7.27 8.43 9.67 11.01 12.42 13.93 0.26 0.35 0.46 0.58 0.72 1.04 1.41 1.85 2.34 2.89 3.49 4.16 4.88 5.66 6.49 7.39 8.34 9.35 58.4 79.1 102 129 157 228 308 399 503 617 743 880 1020 1180 1350 1530 1710 1910 5.95 8.06 10.4 13.1 16.0 23.2 31.4 40.7 51.3 62.9 75.7 89.7 104 120 138 156 174 195 6.56 8.89 11.5 14.5 17.6 25.6 34.6 44.8 56.5 69.4 83.5 98.9 115 133 152 172 192 215 67.2 90.7 118 150 183 262 354 460 579 711 854 1015 1175 1362 1549 1762 1967 2198 6.85 9.25 12.1 15.2 18.7 26.7 36.1 46.9 59.0 72.5 87.1 103 120 139 158 180 200 224 7.55 10.2 13.3 16.8 20.6 29.4 39.8 51.7 65.0 79.9 96.0 114 132 153 174 198 221 247 99.6 130 165 202 288 390 506 636 782 943 1113 1299 1504 1709 1931 2163 2421 10.2 13.2 16.8 20.6 29.4 39.7 51.6 64.9 79.7 96.2 113 132 153 174 197 220 247 11.2 14.6 18.5 22.7 32.4 43.8 56.9 71.5 87.9 106 125 146 169 192 217 243 272 4.21 5.75 7.53 9.55 11.8 17.0 23.0 30.1 38.2 47.2 56.9 67.8 79.6 92.5 106 121 136 153 0.93 1.27 1.66 2.11 2.60 3.76 5.07 6.64 8.42 10.4 12.5 14.9 17.6 20.4 23.3 26.6 30.0 33.7 41 55 72 92 114 164 221 290 367 454 547 652 766 889 1017 1159 1309 1469 0.063 0.086 0.112 0.142 0.176 0.254 0.343 0.449 0.569 0.704 0.848 1.010 1.187 1.378 1.577 1.796 2.029 2.277 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Drilling Lines 6x19 Class High Performance Drilling Lines Bridon's conventional six-strand drilling lines deliver excellent ton-mile performance. The pinnacle of drilling line performance is provided by our unique Bristar core drilling lines. Dyform rope construction reduces sheave wear and point loading which combined with the superior dynamic structural stability provided by the Bristar core delivers exceptional performance and sets the standard for drilling applications. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Superior abrasion & wear resistance Crush resistant Corrosion protected IWRC Even load distribution Reduced internal friction Increased bend fatigue Improved torsional stability Enhanced strength to diameter ratio Improved diameter tolerance Up to 60% more service life* *Bristar Ton Mile Performance vs. API standard Drill Line This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

6x19 Class to API 9A Drilling Lines Rope Diameter Approximate Mass In air (M) Minimum Breaking Force (Fmin) EIPS/1960 grade Axial stiffness @20% load Torque Generated at 20% Load Ordinary Lang s Metallic cross section in mm kg/m lbs/ft kn Tonnes Tons MN Mlbs N.m lbs.ft N.m lbs.ft mm 2 in 2 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 25.4 28.6 31.8 34.9 38.1 41.3 44.5 47.6 50.8 54.0 2.84 3.60 4.45 5.36 6.39 7.51 8.71 9.97 11.4 12.8 1.91 2.42 2.99 3.60 4.29 5.04 5.85 6.70 7.63 8.62 514 652 805 970 1156 1359 1577 1805 2055 2323 52.4 66.4 82.1 98.9 118 138 161 184 210 237 57.7 73.2 90.5 109 130 153 177 203 231 261 34 44 54 65 78 91 106 121 138 156 8 10 12 15 17 20 24 27 31 35 180 257 353 467 608 774 969 1185 1441 1731 133 190 261 345 448 571 714 874 1063 1276 334 424 524 631 752 884 1026 1174 1338 1512 0.518 0.657 0.812 0.979 1.17 1.37 1.59 1.82 2.07 2.34 2 1/4 2 1/2 2 3/4 3 57.2 63.5 69.9 76.2 14.4 17.7 21.5 25.5 9.67 11.9 14.4 17.2 2606 3212 3762 4471 266 327 383 456 293 361 423 502 175 215 261 310 39 48 59 70 2057 2814 3629 4701 1517 2075 2676 3467 1696 2090 2533 3010 2.63 3.24 3.93 4.67 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Marine Riser Tensioner Lines Steel core Class 6x36 (Metric) incl. 6x31WS, 6x36WS, 6x41WS, 6x46WS, 6x49WS High Performance MRT Lines The constant cycling of marine riser tensioner lines over sheaves demands that ropes that are flexible and highlyresistant to bend fatigue. Bridon's Steel core marine riser tensioner lines are robust and offer excellent abrasion and fatigue resistance. A proprietary blocking and lubrication medium provides corrosion resistance with the additional protection of a drawn galvanised finish. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. High quality six strand flexible Good bend fatigue performance Fully lubricated Corrosion resistant Consistent performance Premium quality This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Steel core Class 6x36 (Metric) Marine Riser Tensioner Lines Rope Dia Nominal rope length mass (M) 1770 grade Minimum Breaking Force (Fmin) 1960 grade 2160 grade Axial Stiffness at 20% Load Nominal metallic cross-sectional area (A) mm kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons kn Tonnes Tons MN Mlbs mm2 in 2 10 11 12 13 14 16 18 19 20 22 24 26 28 32 0.41 0.49 0.59 0.69 0.80 1.05 1.33 1.48 1.64 1.98 2.36 2.76 3.21 4.19 0.61 0.74 0.88 1.03 1.19 1.56 1.97 2.20 2.44 2.95 3.51 4.12 4.78 6.24 63.0 76.2 90.7 106 124 161 204 227 252 305 363 426 494 645 6.42 7.77 9.25 10.9 12.6 16.4 20.8 23.2 25.7 31.1 37.0 43.4 50.4 65.8 7.08 8.57 10.2 12.0 13.9 18.1 22.9 25.6 28.3 34.3 40.8 47.9 55.5 72.5 69.8 84.4 100 118 137 179 226 252 279 338 402 472 547 715 7.11 8.61 10.2 12.0 13.9 18.2 23.0 25.7 28.5 34.4 41.0 48.1 55.8 72.8 7.84 9.49 11.3 13.3 15.4 20.1 25.4 28.3 31.4 38.0 45.2 53.0 61.5 80.3 76.9 93.0 111 130 151 197 249 278 308 372 443 520 603 787 7.84 9.48 11.3 13.2 15.4 20.1 25.4 28.3 31.4 37.9 45.1 53.0 61.5 80.3 8.64 10.5 12.4 14.6 16.9 22.1 28.0 31.2 34.6 41.8 49.8 58.4 67.8 88.5 4.78 5.79 6.89 8.08 9.38 12.2 15.5 17.3 19.1 23.2 27.6 32.3 37.5 49.0 1.05 1.28 1.52 1.78 2.07 2.70 3.42 3.81 4.22 5.10 6.08 7.13 8.27 10.80 46 56 66 78 90 118 149 166 184 223 265 311 361 471 0.071 0.086 0.103 0.120 0.140 0.183 0.231 0.257 0.285 0.345 0.411 0.482 0.559 0.730 36 38 40 44 48 52 56 60 5.30 5.91 6.54 7.92 9.42 11.1 12.8 14.7 7.89 8.80 9.75 11.8 14.0 16.5 19.1 21.9 817 910 1008 1220 1452 1704 1976 2268 83.2 92.8 103 124 148 174 201 231 91.8 102 113 137 163 192 222 255 904 1008 1116 1351 1608 1887 2188 2512 92.2 103 114 138 164 192 223 256 102 113 125 152 181 212 246 282 997 1110 1230 1489 1772 2079 2411 2768 102 113 125 152 181 212 246 282 112 125 138 167 199 234 271 311 62.0 69.1 76.5 92.6 110 129 150 172 13.67 15.23 16.88 20.42 24.30 28.52 33.08 37.97 596 664 736 891 1060 1244 1443 1656 0.924 1.030 1.141 1.380 1.643 1.928 2.236 2.567 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Exploration Drilling Rigs n Marine Riser Tensioner Lines 6x37 Class Market Leading MRT Lines The constant cycling of marine riser tensioner ropes over sheaves demands that ropes used for this application are flexible and highly-resistant to bend fatigue. Dyform rope construction reduces sheave wear and point loading which combined with the superior dynamic structural stability provided by the Bristar core delivers exceptional performance and sets the standard for marine riser tensioner applications. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Superior abrasion & wear resistance Crush resistant Corrosion protected IWRC Even load distribution Reduced internal friction Accurate diameter tolerance Increased bend fatigue Improved torsional stability Enhanced strength to diameter ratio This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

6x37 Class Marine Riser Tensioner Lines Rope Diameter Approximate Mass In air Minimum Breaking Force (Fmin) EIPS/1770 grade Axial stiffness @20% load Torque Generated at 20% Load Lang s Lay Metallic cross section in mm kg/m lbs/ft kn Tonnes Tons MN Mlbs kn.m lbs.ft mm 2 in 2 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 44 44.5 47.6 48 50.8 52 54 56 57.2 60.3 63.5 64 66.7 69.9 73.0 76.2 8.62 8.79 10.1 10.3 11.5 12.0 13.0 14.0 14.5 16.2 17.9 18.2 19.8 21.7 23.7 25.8 5.79 5.91 6.78 6.89 7.72 8.09 8.72 9.38 9.77 10.9 12.1 12.2 13.3 14.6 15.9 17.4 1456 1486 1704 1733 1941 2034 2194 2359 2370 2639 2926 2972 3229 3546 3867 4214 148 152 174 177 198 207 224 240 242 269 298 303 329 361 394 430 164 167 191 195 218 228 246 265 266 296 329 334 363 398 434 473 103 105 121 123 138 144 156 167 174 194 215 219 238 261 285 310 23 24 27 28 31 32 35 38 39 44 48 49 53 59 64 70 1.4 1.4 1.8 1.8 2.1 2.3 2.6 2.9 3.0 3.5 4.1 4.1 4.7 5.4 6.2 7.0 1030 1062 1304 1337 1585 1700 1904 2124 2177 2558 2987 3058 3462 3984 4538 5161 1004 1024 1174 1194 1338 1402 1512 1626 1693 1885 2090 2123 2306 2533 2762 3010 1.56 1.59 1.82 1.85 2.07 2.17 2.34 2.52 2.62 2.92 3.24 3.29 3.57 3.93 4.28 4.67 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Production & Transportation n CALM Buoy/Off take Mooring Systems Viking Braidline Polyester Mooring System Specialists Viking Braidline Polyester is a balanced, flexible construction which distributes the weight and strength equally between the sheath and the braided core. Viking Braidline offers a higher elongation than competing constructions and is suitable for many shock load applications. OCIMF 1987 Compliant Balanced construction Mass: 50% sheath, 50% core Flexible and easy to handle Material: High Tenacity Polyester multifilament fibre Construction: Braidline Colour: Natural (white) Markers: Blue Relative Density: 1.38 Melting Point: 256 C Torque Properties: Torque Balanced Shrinkage (Cold Water): 0% Water uptake: Low UV resistance: Excellent Abrasion Resistance: Very Good Worked Braidline New Braidline This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Polyester Rope Diameter Rope Circumference In Air Nominal Mass Submerged Minimum breaking force (F min) mm in mm in kg/m lb/ft kg/m lb/ft kn Tonnes Tons 16 18 21 24 28 32 36 40 44 48 52 56 60 64 72 80 88 96 104 112 120 128 136 144 152 160 168 176 184 192 216 240 5/8 3/4 7/8 1 1 1/8 1 5/16 1 1/2 1 5/8 1 3/4 2 2 1/8 2 1/4 2 1/2 2 5/8 3 3 1/8 3 1/2 3 3/4 4 1/8 4 3/8 4 3/4 5 5 3/8 5 5/8 6 6 1/4 6 5/8 7 7 1/4 7 1/2 8 1/2 9 1/2 50 57 66 75 88 101 113 126 138 151 163 176 188 201 226 251 276 302 327 352 377 402 427 452 478 503 528 553 578 603 679 754 2 2 1/4 2 5/8 3 3 1/2 4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 27 30 0.19 0.23 0.39 0.50 0.68 0.89 1.12 1.22 1.47 1.76 2.05 2.38 2.74 3.12 3.95 4.87 5.91 7.02 8.25 9.56 11.00 12.50 14.10 15.80 17.60 19.50 21.50 23.60 25.80 28.10 35.60 43.90 0.28 0.33 0.58 0.74 1.01 1.32 1.67 1.82 2.19 2.62 3.05 3.54 4.08 4.64 5.88 7.25 8.79 10.45 12.28 14.23 16.37 18.60 20.98 23.51 26.19 29.02 31.99 35.12 38.39 41.82 52.98 65.33 0.05 0.06 0.10 0.13 0.17 0.22 0.28 0.31 0.37 0.45 0.52 0.60 0.69 0.79 1.00 1.24 1.50 1.78 2.09 2.42 2.79 3.17 3.58 4.01 4.46 4.95 5.45 5.98 6.54 7.13 9.03 11.13 0.07 0.08 0.15 0.19 0.26 0.33 0.42 0.46 0.55 0.66 0.77 0.90 1.03 1.18 1.49 1.84 2.23 2.65 3.11 3.61 4.15 4.72 5.32 5.96 6.64 7.36 8.11 8.91 9.74 10.60 13.43 16.57 61.9 77.5 106 148 163 244 286 346 397 489 551 628 756 828 1059 1304 1549 1785 2050 2354 2697 2932 3305 3717 4129 4580 5031 5521 6031 6570 8316 10268 6.31 7.90 10.8 15.1 16.6 24.9 29.2 35.3 40.5 49.9 56.2 64.0 77.1 84.4 108 133 158 182 209 240 275 299 337 379 421 467 513 563 615 670 848 1047 6.95 8.71 11.9 16.6 18.3 27.4 32.2 38.9 44.6 55.0 61.9 70.5 85.0 93.0 119 147 174 201 230 264 303 329 371 418 464 515 565 620 678 738 934 1154 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Fibre MODU Tethers Superline Steelite/Steelite Xtra Fibre MODU Tethers Bridon Superline Steelite/Steelite Xtra provides a lightweight synthetic tether for MODU's. A thicker construction of the braided jacket provides enhanced protection and improves handling performance. High performance synthetic tethers for critical Oil & Gas applications, Bridon the benchmark for reliability. Enhanced strength to diameter ratio Balanced construction Protective braided jacket Light weight Long service life Low maintenance Easy handling Material: Dyneema, high modulus polyethylene SK62 or SK75 Construction: Superline Colour: Superline - White Markers: Blue and lime - Steelite Blue and pink - Steelite Xtra Relative Density: 0.97 to 1.15 depending on diameter and jacket material (Check with sales office for specific details) Melting Point: 150 C Torque Properties: Torque Balanced Shrinkage (Cold Water): 0% Water Uptake: Low UV Resistance: Very Good Abrasion Resistance: Excellent Worked Superline New Superline This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Superline Steelite/Steelite Xtra Nominal Diameter Rope Circumference Nominal Mass In Air Steelite Minimum breaking force (F min) Steelite Xtra Minimum breaking force (F min) mm in mm in kg/m lb/ft kn Tonnes Tons kn Tonnes Tons 28 30 32 34 36 40 44 48 52 56 60 64 68 1 1/8 1 7/32 1 5/16 1 13/32 1 1/2 1 5/8 1 3/4 2 2 1/8 2 1/4 2 1/2 2 5/8 2 13/16 88 94 101 107 113 126 138 151 163 176 188 201 214 3 1/2 3 3/4 4 4 1/4 4 1/2 5 5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 0.46 0.48 0.67 0.73 0.77 0.87 1.04 1.38 1.73 1.90 2.08 2.45 2.66 0.31 0.32 0.45 0.49 0.52 0.59 0.70 0.93 1.16 1.28 1.40 1.65 1.79 466 503 593 674 722 883 1050 1236 1442 1658 1893 2384 2639 47.5 51.3 60.4 68.7 73.6 90.0 107 126 147 169 193 243 269 52.3 56.5 66.6 75.7 81.1 99.2 118 139 162 186 213 268 296 608 657 687 814 912 1109 1315 1609 1903 2237 2570 3012 3365 62.0 67.0 70.0 83.0 93.0 113 134 164 194 228 262 307 343 68.3 73.8 77.1 91.5 102 125 148 181 214 251 289 338 378 72 76 80 88 96 104 112 120 3 3 1/16 3 1/8 3 1/2 3 3/4 4 1/8 4 3/8 4 3/4 226 239 251 276 302 327 352 377 9 9 1/2 10 11 12 13 14 15 2.85 3.16 3.34 4.24 4.92 6.01 7.01 9.18 1.92 2.12 2.24 2.85 3.31 4.04 4.71 6.17 2963 3335 3659 4444 5229 6141 7191 8231 302 340 373 453 533 626 733 839 333 375 411 499 587 690 808 925 3718 4189 4473 5278 6131 7289 8152 9349 379 427 456 538 625 743 831 953 418 471 503 593 689 819 916 1050 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Production & Transportation n CALM Buoy/Off take Mooring Systems Viking Braidline Nylon Super Hawser Mooring System Specialists Viking Braidline Nylon Super Hawser is a balanced, flexible construction which distributes the weight and strength equally between the sheath and the braided core. Viking Braidline offers a higher elongation than competing constructions and is suitable for many shock load applications. OCIMF 1987 Compliant Balanced construction Mass: 50% sheath, 50% core Flexible and easy to handle High performance ropes for critical Oil & Gas applications, Bridon the benchmark for reliability. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Nylon Super Hawser Rope Diameter Rope Circumference In Air Nominal Mass Submerged Minimum breaking force (F min) New Dry New Wet mm in mm in kg/m lbs/ft kg/m lb/ft kn Tonnes Tons kn Tonnes Tons 80 88 96 104 112 120 128 136 144 152 160 168 176 184 3 1/8 3 1/2 3 3/4 4 1/8 4 3/8 4 3/4 5 5 3/8 5 5/8 6 6 1/4 6 5/8 6 7/8 7 1/4 251 277 302 327 352 377 402 427 452 478 503 528 553 578 10 11 12 13 14 15 16 17 18 19 20 21 22 23 4.0 4.8 5.7 6.7 7.8 8.9 10.2 11.4 12.8 14.3 15.8 17.4 19.1 20.9 2.7 3.2 3.8 4.5 5.2 6.0 6.9 7.7 8.6 9.6 10.6 11.7 12.8 14.0 0.39 0.46 0.55 0.65 0.75 0.86 0.98 1.10 1.24 1.38 1.52 1.68 1.84 2.02 0.26 0.31 0.37 0.43 0.51 0.58 0.66 0.74 0.83 0.93 1.02 1.13 1.24 1.36 1440 1750 2040 2440 2820 3210 3610 4110 4610 5110 5660 6230 6840 7475 1440 1750 2040 2440 2820 3210 3610 4110 4610 5110 5660 6230 6840 7475 162 197 229 274 317 361 406 462 518 574 636 700 769 840 1370 1660 1940 2310 2680 3050 3420 3900 4370 4850 5370 5910 6490 7100 140 169 198 236 273 311 349 398 446 495 548 603 662 724 154 187 218 260 301 343 384 438 491 545 603 664 729 798 192 200 208 216 224 232 240 7 1/2 7 7/8 8 1/4 8 1/2 8 7/8 9 1/8 9 1/2 603 628 654 679 704 729 754 24 25 26 27 28 29 30 22.8 24.7 26.7 28.8 31.0 33.3 35.6 15.3 16.6 17.9 19.4 20.8 22.4 23.9 2.20 2.38 2.58 2.78 2.99 3.21 3.44 1.48 1.60 1.73 1.87 2.01 2.16 2.31 8150 8845 9550 10300 11080 11870 12700 8150 8845 9550 10300 11080 11870 12700 916 994 1073 1157 1245 1334 1427 7730 8390 9060 9770 10510 11215 12000 788 856 924 996 1072 1144 1224 869 943 1018 1098 1181 1260 1348 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Production & Transportation n Off-take Mooring Systems Superline Nylon OCIMF 2000 Mooring System Specialists Bridon Superline is a torque balanced circular braided construction consisting of an outer protective braided jacket over a central group of parallel low twist cores. In the as new condition Bridon Superline offers a slightly stiffer solution than the Viking Braidline Construction. OCIMF 2000 Compliant Balanced construction Protective braided jacket High strength efficiency High performance synthetic mooring systems for critical Oil & Gas applications, Bridon the benchmark for reliability. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Superline Nylon OCIMF 2000 Rope Diameter Rope Circumference In Air Nominal Mass Submerged Minimum breaking force (F min) New Dry New Wet mm in mm in kg/m lbs/ft kg/m lb/ft kn Tonnes Tons kn Tonnes Tons 80 88 96 104 112 120 128 136 144 152 160 168 176 184 3 1/8 3 4/8 3 6/8 4 1/8 4 3/8 4 3/4 5 5 3/8 5 5/8 6 6 2/8 6 5/8 6 7/8 7 2/8 251 277 302 327 352 377 402 427 452 478 503 528 553 578 10 11 12 13 14 15 16 17 18 19 20 21 22 23 4.2 5.2 6.1 7.0 8.3 9.5 10.4 11.7 13.2 14.6 16.2 17.8 19.8 22.2 2.8 3.5 4.1 4.7 5.6 6.4 7.0 7.9 8.9 9.8 10.9 12.0 13.3 14.9 0.41 0.50 0.59 0.68 0.80 0.92 1.00 1.13 1.27 1.41 1.56 1.72 1.91 2.14 0.27 0.34 0.40 0.45 0.54 0.62 0.68 0.76 0.86 0.95 1.05 1.16 1.28 1.44 1462 1776 2109 2482 2884 3316 3777 4267 4787 5337 5925 6533 7181 7848 149 181 215 253 294 338 385 435 488 544 604 666 732 800 164 200 237 279 324 373 424 479 538 600 666 734 807 882 1344 1628 1942 2276 2649 3041 3463 3914 4395 4905 5435 5994 6592 7210 137 166 198 232 270 310 353 399 448 500 554 611 672 735 151 183 218 256 298 342 389 440 494 551 611 674 741 810 192 200 208 216 224 232 7 4/8 7 7/8 8 2/8 8 4/8 8 7/8 9 1/8 603 628 654 679 704 729 24 25 26 27 28 29 24.1 26.1 28.6 30.5 32.5 35.4 16.2 17.5 19.2 20.5 21.8 23.8 2.33 2.52 2.76 2.94 3.14 3.42 1.56 1.69 1.85 1.98 2.10 2.30 8554 9290 10055 10850 11674 12537 872 947 1025 1106 1190 1278 961 1044 1130 1219 1312 1409 7858 8525 9231 9957 10722 11507 801 869 941 1015 1093 1173 883 958 1037 1119 1205 1293 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Fibre MODU Tethers Superline Polyester (MODU) Fibre MODU Tethers Bridon Superline Polyester (MODU) provides a lightweight synthetic tether for MODU's. A thicker construction of the braided jacket provides enhanced protection and improves handling performance. High performance synthetic tethers for critical Oil & Gas applications, Bridon the benchmark for reliability. High strength efficiency Balanced construction Protective braided jacket Long service life Low maintenance Easy handling Superline Polyester (MODU) Nominal Diameter MBL In Air Approximate Mass Submerged Post installation Drift Stiffness Intermediate Stiffness Storm Stiffness in mm kn kips kg/m lbs/ft kg/m lb/ft MN 10 3 kips MN 10 3 kips MN 10 3 kips 5 5/16 5 13/16 6 1/4 6 5/8 7 7 5/16 7 15/16 135 147 158 169 178 186 194 3924 4905 6180 6965 7848 8829 9810 882 1102 1389 1565 1764 1984 2205 11.4 13.6 15.8 18.1 20.2 22.1 24.1 7.7 9.1 10.6 12.2 13.6 14.9 16.2 2.9 3.4 4.0 4.5 5.1 5.5 6.0 1.9 2.3 2.7 3.1 3.4 3.7 4.1 51.0 63.8 80.3 90.5 102.0 114.8 127.5 11.5 14.3 18.1 20.3 22.9 25.8 28.7 105.9 132.4 166.9 188.1 211.9 238.4 264.9 23.8 29.8 37.5 42.3 47.6 53.6 59.5 109.9 137.3 173.0 195.0 219.7 247.2 274.7 24.7 30.9 38.9 43.8 49.4 55.6 61.7 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Production & Transportation n Floating Production Mooring System Superline Polyester (Permanent Mooring) Synthetic Permanent Moorings Bridon Superline is a torsionally balanced construction and the polyester material grades offer the highest strength to weight ratio for the permanent mooring solution. The inclusion of a particle filter layer to limit the ingress of abrasive particles and a marine finish on load bearing elements to enhance resistance to yarn on yarn abrasion ensures long term performance for field lives in excess of 20 years. High performance synthetic mooring systems for critical Oil & Gas applications, Bridon the benchmark for reliability. High strength efficiency Balanced construction Protective braided jacket Light weight Long service life Low maintenance Improved handling This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Superline Polyester (Permanent Mooring) Nominal Diameter MBL In Air Approximate Mass Submerged Post installation Drift Stiffness Intermediate Stiffness Storm Stiffness in mm kn kips kg/m lbs/ft kg/m lb/ft MN 10 3 kips MN 10 3 kips MN 10 3 kips 4 15/16 5 1/2 5 15/16 6 1/4 6 5/8 6 15/16 7 1/4 7 15/16 8 3/8 8 3/4 9 126 139 151 158 168 177 185 201 213 223 229 3924 4905 6180 6959 7848 8829 9810 10987 12263 13734 14715 882 1102 1389 1565 1764 1984 2205 2469 2756 3086 3307 10.0 12.1 14.4 15.9 18.0 19.9 21.9 25.8 28.9 31.8 33.6 6.7 8.1 9.7 10.7 12.1 13.4 14.7 17.3 19.4 21.4 22.6 2.5 3.0 3.6 4.0 4.5 5.0 5.5 6.5 7.2 8.0 8.4 1.7 2.0 2.4 2.7 3.0 3.4 3.7 4.3 4.9 5.4 5.7 51.0 63.8 80.3 90.5 102.0 114.8 127.5 142.8 159.4 178.5 191.3 11.5 14.3 18.1 20.3 22.9 25.8 28.7 32.1 35.8 40.1 43.0 105.9 132.4 166.9 187.9 211.9 238.4 264.9 296.6 331.1 370.8 397.3 23.8 29.8 37.5 42.3 47.6 53.6 59.5 66.7 74.4 83.3 89.3 109.9 137.3 173.0 194.9 219.7 247.2 274.7 307.6 343.4 384.6 412.0 24.7 30.9 38.9 43.8 49.4 55.6 61.7 69.1 77.2 86.4 92.6 9 1/2 9 3/4 10 1/8 10 3/8 10 9/16 10 13/16 11 1/16 11 1/4 11 7/16 11 5/8 241 247 257 263 268 274 281 286 291 296 15696 16677 17858 18639 19620 20601 21582 22563 23544 24525 3527 3748 3968 4189 4409 4630 4850 5071 5291 5512 37.2 39.2 42.4 44.4 46.4 48.5 50.7 52.6 54.7 56.7 25.0 26.3 28.5 29.8 31.2 32.6 34.1 35.3 36.8 38.1 9.3 9.8 10.6 11.1 11.6 12.1 12.7 13.2 13.7 14.2 6.3 6.6 7.1 7.5 7.8 8.2 8.5 8.8 9.2 9.5 204.0 216.8 232.2 242.3 255.1 267.8 280.6 293.3 306.1 318.8 45.9 48.7 51.6 54.5 57.3 60.2 63.1 65.9 68.8 71.7 423.8 450.3 482.2 503.3 529.7 556.2 582.7 609.2 635.7 662.2 95.2 101.2 107.1 113.1 119.0 125.0 131.0 136.9 142.9 148.8 439.5 467.0 500.0 521.9 549.4 576.8 604.3 631.8 659.2 686.7 98.8 104.9 111.1 117.3 123.5 129.6 135.8 142.0 148.1 154.3 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Anchor lines Diamond Blue High Strength Anchor Lines Bridon's high-strength steel anchor line products are robust and offer excellent abrasion and fatigue resistance to optimise performance on winches and sheaves. A proprietary blocking and lubrication medium provides corrosion resistance with the additional protection of a drawn galvanised finish. Combines strength & flexibility Good fatigue resistance Premium Quality Abrasion & wear resistant Long service life, reduced down time Corrosion resistant Premium quality Anchor lines for demanding Oil & Gas applications, Bridon the benchmark for reliability. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Anchor lines Rope Diameter Nominal rope length mass (M) In air (M) Submerged Minimum Breaking Force (Fmin) 1960 grade Axial Stiffness at 20% Load Torque Generated at 20% Load Ordinary Lay Nominal metallic cross-sectional area (A) mm in kg/m lbs/ft kg/m lbs/ft kn Tonnes Tons MN Mlbs kn.m lbs/ft mm 2 in 2 52 54 56 57.2 60 60.3 63.5 64 66.7 68 69.9 72 76 76.2 80 82.6 84 88 88.9 92 95.3 96 100 101.6 108 114.3 120.7 127 2.1/8 2.1/4 2 3/8 2 1/2 2 5/8 2 3/4 3 3 1/4 3 1/2 3 3/4 4 4 1/4 4 1/2 4 3/4 5 11.7 12.6 13.6 14.2 15.6 15.7 17.5 17.7 19.3 20.0 21.2 22.4 25.0 25.1 27.7 29.5 30.6 33.5 34.2 36.6 39.3 39.9 43.3 44.7 50.5 56.6 63.1 69.8 7.86 8.48 9.12 9.51 10.5 10.6 11.7 11.9 12.9 13.4 14.2 15.1 16.8 16.9 18.6 19.8 20.5 22.5 23.0 24.6 26.4 26.8 29.1 30.0 33.9 38.0 42.4 46.9 10.2 11.0 11.8 12.3 13.6 13.7 15.2 15.4 16.8 17.4 18.4 19.5 21.8 21.9 24.1 25.7 26.6 29.2 29.8 31.9 34.2 34.7 37.7 38.9 43.9 49.2 54.9 60.8 6.84 7.38 7.93 8.28 9.11 9.20 10.2 10.4 11.3 11.7 12.4 13.1 14.6 14.7 16.2 17.3 17.8 19.6 20.0 21.4 23.0 23.3 25.3 26.1 29.5 33.0 36.8 40.8 2231 2406 2587 2699 2970 3000 3326 3379 3670 3815 4031 4277 4765 4790 5280 5629 5821 6389 6520 6559 7038 7142 7750 8000 8306 9303 10374 11485 227 245 264 275 303 306 339 344 374 389 411 436 486 488 538 574 593 651 665 669 717 728 790 815 847 948 1057 1171 251 270 291 303 334 337 374 380 413 429 453 481 536 538 593 633 654 718 733 737 791 803 871 899 934 1046 1166 1291 140 151 163 170 187 189 209 213 231 240 254 269 300 302 333 354 367 402 411 440 472 479 520 536 606 679 757 838 31 33 36 37 41 42 46 47 51 53 56 59 66 67 73 78 81 89 91 97 104 106 115 118 134 150 167 185 1.51 1.69 1.88 2.01 2.32 2.35 2.75 2.81 3.18 3.37 3.66 4.00 4.71 4.75 5.49 6.04 6.36 7.31 7.54 7.85 8.72 8.91 10.1 10.6 11.7 13.8 16.3 19.0 1112 1245 1389 1480 1708 1734 2025 2073 2347 2487 2701 2952 3471 3499 4049 4457 4687 5389 5556 5785 6430 6573 7429 7791 8598 10193 12003 13982 1338 1443 1552 1619 1781 1799 1995 2027 2201 2288 2418 2565 2858 2873 3167 3376 3491 3832 3911 4188 4494 4560 4948 5108 5771 6464 7208 7981 2.074 2.236 2.405 2.509 2.761 2.789 3.093 3.141 3.412 3.546 3.747 3.976 4.430 4.453 4.908 5.233 5.412 5.939 6.061 6.491 6.965 7.068 7.669 7.917 8.946 10.020 11.173 12.370 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Offshore Exploration Drilling Rigs n Anchor lines DB2K High Strength Anchor Lines Dyform DB2K offers enhanced strength to diameter ratio enabling optimum utilisation of limited volume winch arrangements. Increased surface area of Dyformed strands improves stress distribution enabling superior crush & abrasion resistance. Premium quality anchor lines from Bridon, a brand proven in the most demanding global Oil & Gas applications. Enhanced strength to diameter ratio Premium Quality Abrasion & wear resistant Long service life, reduced down time Improved diameter tolerance Corrosion resistant Superior Crush resistance This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

DB2K Anchor lines Rope Diameter Nominal rope length mass (M) In air (M) Submerged Minimum Breaking Force (Fmin) 1960 grade Axial Stiffness at 20% Load Torque Generated at 20% Load Ordinary Nominal metallic cross-sectional area (A) mm in kg/m lbs/ft kg/m lbs/ft kn Tonnes Tons MN Mlbs kn.m lbs/ft mm 2 in 2 52 54 56 57.2 60 60.3 63.5 64 66.7 68 69.9 72 76 76.2 80 82.6 2.1/8 2.1/4 2 3/8 2 1/2 2 5/8 2 3/4 3 3 1/4 12.2 13.2 14.2 14.8 16.3 16.5 18.3 18.6 20.2 20.9 22.1 23.5 26.2 26.3 29.0 30.9 8.22 8.87 9.54 10.0 10.9 11.1 12.3 12.5 13.5 14.1 14.9 15.8 17.6 17.7 19.5 20.8 10.7 11.5 12.4 12.9 14.2 14.3 15.9 16.1 17.5 18.2 19.3 20.4 22.8 22.9 25.2 26.9 7.2 7.7 8.3 8.7 9.5 9.6 10.7 10.8 11.8 12.2 12.9 13.7 15.3 15.4 16.9 18.1 2396 2583 2778 2899 3189 3221 3572 3629 3941 4096 4329 4593 5117 5144 5670 6044 244 263 283 295 325 328 364 370 402 418 441 468 522 524 578 616 269 290 312 326 358 362 402 408 443 460 487 516 575 578 637 679 146 157 169 176 194 196 217 221 240 249 263 279 311 313 345 368 32 35 37 39 43 43 48 49 53 55 58 62 69 69 76 81 1.62 1.81 2.02 2.16 2.49 2.53 2.95 3.02 3.42 3.62 3.93 4.30 5.06 5.10 5.90 6.49 1194 1337 1491 1589 1834 1862 2174 2226 2520 2670 2900 3170 3728 3757 4348 4786 1402 1512 1626 1696 1866 1885 2090 2123 2306 2397 2533 2687 2994 3010 3318 3537 2.173 2.343 2.520 2.629 2.893 2.922 3.240 3.291 3.575 3.715 3.926 4.165 4.641 4.666 5.143 5.482 84 88 88.9 92 95.3 96 100 101.6 3 1/2 3 3/4 4 32.0 35.1 35.8 38.3 41.1 41.7 45.3 46.8 21.5 23.6 24.0 25.7 27.6 28.0 30.4 31.4 27.8 30.5 31.1 33.4 35.8 36.3 39.4 40.7 18.7 20.5 20.9 22.4 24.0 24.4 26.5 27.3 6251 6861 7002 7321 7856 7971 8430 8702 637 699 714 746 801 813 859 887 703 771 787 823 883 896 948 978 380 418 426 456 490 497 539 557 84 92 94 101 108 110 119 123 6.83 7.85 8.09 8.76 9.73 9.95 11.0 11.5 5033 5787 5967 6456 7176 7336 8081 8475 3658 4014 4097 4388 4708 4778 5184 5351 5.670 6.222 6.350 6.801 7.298 7.405 8.035 8.294 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.

Exploration Drilling Rigs n Drilling Lines High Performance Drilling Lines The pinnacle of drilling line performance is provided by our unique Bristar core drilling lines. Dyform rope construction reduces sheave wear and point loading which combined with the superior dynamic structural stability provided by the Bristar core delivers exceptional performance and sets the standard for drilling applications. Dyform Bristar 6x19 Class Drilling Lines Superior abrasion & wear resistance Crush resistant Corrosion protected IWRC Increased bend fatigue Improved torsional stability Enhanced strength to diameter ratio Improved diameter tolerance Up to 60% more service life* *Bristar Ton Mile Performance vs. API standard Drill Line Rope Diameter Approximate Mass In air Minimum Breaking Force (Fmin) EIPS / 1960 grade Axial Stiffness at 20% Load Torque Generated at 20% Load Ordinary Lang s Metallic cross section in mm kg/m lbs/ft kn Tonnes Tons MN Mlbs N.m lbs/ft N.m lbs/ft mm 2 in 2 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 1/2 2 3/4 3 25.4 28.6 31.8 34.9 38.1 41.3 44.5 47.6 50.8 54 57.2 63.5 69.9 76.2 2.84 3.60 4.45 5.36 6.39 7.51 8.71 9.97 11.4 12.8 14.4 17.7 21.5 25.5 1.91 2.42 2.99 3.60 4.29 5.04 5.85 6.70 7.63 8.62 9.67 11.9 14.4 17.2 514 652 805 970 1160 1360 1580 1810 2060 2320 2610 3210 3760 4470 52.4 66.4 82.1 98.9 118 138 161 184 210 237 266 327 383 456 57.7 73.2 90.5 109 130 153 177 203 231 261 293 361 423 502 34.0 44.0 54.0 65.0 78.0 91.0 106 121 138 156 175 215 261 310 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order. 8.00 10.0 12.0 15.0 17.0 20.0 24.0 27.0 31.0 35.0 39.0 48.0 59.0 70.0 180 257 353 467 608 774 969 1190 1440 1730 2060 2810 3630 4700 133 190 261 345 448 571 714 874 1060 1277 1520 2080 2680 3470 334 424 524 631 752 884 1030 1170 1340 1510 1700 2090 2530 3010 0.52 0.66 0.81 0.98 1.17 1.37 1.59 1.82 2.07 2.34 2.63 3.24 3.93 4.67

Exploration Drilling Rigs n Drilling Lines Constructex High Performance Drilling Lines Rigorous checks during manufacture ensures Bridon only produces premium quality rope. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Increased strength to diameter ratio Superior abrasion & wear resistance Exceptional spooling Improved diameter tolerance Robust and crush resistant Enhanced service life* *Constructex Drilling Line vs. API Std Drilling line Constructex Drilling Lines Diameter Approx mass WSC Minimum Breaking Force EIP in mm lb/ft kg/ft Tons kn 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 15.9 19.1 22.2 25.4 28.6 31.8 34.9 38.1 41.3 0.90 1.10 1.50 2.00 2.60 3.20 3.80 4.60 5.30 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. 0.39 0.50 0.68 0.91 1.18 1.45 1.72 2.09 2.41 25.5 36.5 48.6 62.8 79.5 98.0 119 139 163 227 325 432 559 707 872 1059 1237 1454 This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Exploration Drilling Rigs n Drilling Lines Steel core Class 6x19 Premium Quality Drilling Lines Bridon's Steel core drilling line products are robust and offer excellent abrasion and fatigue resistance to optimise performance on winches and sheaves. A proprietary blocking and lubrication medium provides corrosion resistance with the additional protection of a drawn galvanised finish. High quality six strand crane rope Excellent resistance to wear Fully lubricated Corrosion resistant Good ton-mile performance High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. 6x19 Class Drilling Lines Rope Diameter Nominal rope length mass (M) Minimum Breaking Force (Fmin) EIPS grade EEIPS grade Axial Stiffness at 20% Load Torque Generated at 20% Load Ordinary Lang s Nominal metallic cross-sectional area (A) in mm kg/m lbs/ft kn Tonnes Tons kn Tonnes Tons MN Mlbs N.m lbs.ft N.m lbs.ft mm 2 in 2 1 1.1/8 1.1/4 1.3/8 1.1/2 1.5/8 1.3/4 1.7/8 2 25.4 28.6 31.8 34.9 38.1 41.3 44.5 47.6 50.8 2.76 3.49 4.30 5.20 6.20 7.27 8.43 9.67 11.0 1.85 2.34 2.89 3.49 4.16 4.88 5.66 6.49 7.39 460 579 711 854 1020 1180 1360 1550 1760 46.9 59.0 72.5 87.1 103 120 139 158 180 51.7 65.0 79.9 96.0 114 132 153 174 198 506 636 782 943 1110 1300 1500 1710 1930 51.6 64.9 79.7 96.2 113 132 153 174 197 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order. 56.9 71.5 87.9 106 125 146 169 192 217 30.1 38.2 47.2 56.9 67.8 79.6 92.5 106 121 6.60 8.40 10.4 12.5 14.9 17.6 20.4 23.3 26.6 164 232 317 417 541 679 848 1030 1250 121 171 233 308 399 501 626 761 924 210 298 407 537 696 873 1090 1330 1610 155 220 300 396 513 644 804 978 1190 290 367 454 547 652 766 889 1020 1160 0.45 0.57 0.70 0.85 1.01 1.19 1.38 1.58 1.80

Oil & Gas Well Servicing n Sand Lines Sand Lines Premium Quality Ropes Rigorous checks during manufacture ensures Bridon only produces premium quality rope. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Wear resistant - large outer wires Excellent spooling Resistance to kinking Easy to splice Sand Lines Diameter Approx mass WSC Minimum Breaking Force in mm lb/ft kg/ft Tons kn 3/8 7/16 1/2 9/16 5/8 3/4 9.5 11.1 12.7 14.3 15.9 19.1 0.21 0.29 0.38 0.48 0.59 0.84 0.09 0.13 0.17 0.21 0.26 0.37 5.90 7.90 10.3 13.0 15.9 22.7 52.2 70.6 91.7 116 142 202 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Oil & Gas Well Servicing n Tubing Lines Swaged Tubing Lines Premium Quality Ropes Rigorous checks during manufacture ensures Bridon only produces premium quality rope. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Crush resistant Excellent abrasion resistance Wear resistant Exceptional spooling Swaged Tubing Lines Diameter Approx mass WSC Minimum Breaking Force in mm lb/ft kg/ft Tons kn 7/8 1 1 1/8 1 1/4 22.2 25.4 28.6 31.8 1.70 2.22 2.80 2.89 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. 0.77 1.01 1.27 1.28 48.6 62.8 79.5 98.0 432 559 707 872 This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Oil & Gas Well Servicing n Tubing Lines Tubing Lines Premium Quality Ropes Rigorous checks during manufacture ensures Bridon only produces premium quality rope. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Abrasion resistant Excellent spooling Wear resistant Tubing Lines Diameter Approx mass WSC Minimum Breaking Force EIP in mm lb/ft kg/ft Tons kn 3/4 7/8 1 1 1/8 1 1/4 19.1 22.2 25.4 28.6 31.8 1.04 1.41 1.85 2.34 2.89 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. 0.46 0.62 0.82 1.03 1.28 29.4 39.8 51.7 65.0 79.9 262 354 460 579 711 This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Oil & Gas Well Servicing n Tubing Lines Constructex High Performance Tubing Lines Rigorous checks during manufacture ensures Bridon only produces premium quality rope. Breaking load tests on all our ropes gives ultimate assurance that specifications have been met or exceeded. High performance rope technology for critical Oil & Gas applications, Bridon the benchmark for reliability. Enhanced strength to diameter ratio Superior abrasion & wear resistance Exceptional spooling Improved diameter tolerance Robust and crush resistant Increased service life* *Constructex Tubing Line vs. Std Tubing line Constructex Tubing Lines Diameter Approx mass WSC Minimum Breaking Force EIP in mm lb/ft kg/ft Tons kn 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 15.9 19.1 22.2 25.4 28.6 31.8 34.9 38.1 41.3 0.90 1.10 1.50 2.00 2.60 3.20 3.80 4.60 5.30 Note: Tonnes = 1000kg Tons = 2000lbs Figures shown are for guidance purposes only. For specific applications requirements please contact Bridon. This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. 0.39 0.50 0.68 0.91 1.18 1.45 1.72 2.09 2.41 25.5 36.5 48.6 62.8 79.5 98.0 119 139 163 227 325 432 559 707 872 1059 1237 1454 This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order.

Please contact us if you can't find what you are looking for. Bridon are able to manufacture to individual customers specifications and would welcome the opportunity to discuss your requirements. Bridon International Ltd, Balby Carr Bank, Doncaster, DN4 5JQ, UK Phone: +44 1302 565100 Fax: +44 1302 565190 sales@bridon.com 280 New Commerce Blvd., Wilkes Barre, PA 18706, USA Phone: +1 800 521 5555 Fax: +1 800 233 8362 bridon@bridonamerican.com Magdeburger Straße 14aD-45881, Gelsenkirchen, Germany Phone: +49(0) 209 8001 0 Fax: +49(0) 209 8001 275 info@bridon.de www.bridon.com

Oakland City Houston Hanover Coatbridge Willington & Neptune Quay BTC Wilkes Barre Exeter Moscow Lubin Gelsenkirchen Dubai Hangzhou Hong Kong Singapore Jakarta Macaé Johannesburg Perth Sydney 11 Manufacturing locations 17 Sales, Service & Distribution Hubs Global HQ & Bridon Technology Centre (BTC) Auckland Bridon International Ltd, Balby Carr Bank, Doncaster, DN4 5JQ, UK Phone: +44 1302 565100 Fax: +44 1302 565190 sales@bridon.com 280 New Commerce Blvd., Wilkes Barre, PA 18706, USA Phone: +1 800 521 5555 Fax: +1 800 233 8362 bridon@bridonamerican.com Magdeburger Straße 14aD-45881, Gelsenkirchen, Germany Phone: +49(0) 209 8001 0 Fax: +49(0) 209 8001 275 info@bridon.de This disclaimer covers use of this publication and any promotional or other materials or information contained or referenced within it. It is made available on the basis that all liability of whatsoever nature, for any loss or damage arising in connection with your use of this publication, is fully excluded. The use of this publication is governed by English law. Whilst every effort has been made to ensure the accuracy of information in this publication, all products displayed or provided within this publication are subject to change without notice. All (express or implied) warranties, conditions, representations and terms covering the information, content, materials and accuracy or completeness are hereby excluded. Therefore please ensure you clarify your requirements with Bridon prior to any order. Corporate: www.bridon.com Americas: www.bridonamerican.com oilandgas@bridon.com 08/2013 Edition 7 All rights reserved. Copyright Bridon 2013