Frontier Overhead Frame Wheel Rakes WR33 and WR34 Series: 10 to 19 Wheels
Affordable raking solutions for Get The Production You Need If you question how you can achieve faster, more efficient haymaking, then Frontier Overhead Frame Wheel Rakes are your solution. Whether you re a small or large acreage owner, these affordable hay tools gather high-volume crop, produce consistent windrows, and speed up drydown time to give you higher quality hay. And with two rugged classes the WR33 and WR34 Series there s always a Frontier Wheel Rake to suit your needs. The WR33 Series Overhead Frame Wheel Rakes are available in 10-, 12-, 13-, and 15-wheel models with up to 25 feet in raking width to tackle a variety of acreage sizes. For greater crop demands, go with the WR34 Series Overhead Frame Wheel Rakes in 14-, 16-, 17-, and 19-wheel options. Featuring a productive raking width up to 34-feet 6-inches. Built for tractors with a minimum of 40 horsepower, Frontier Overhead Frame Wheel Rakes are equipped with an easily adjustable five or seven position beam angle to maximize your windrow widths. Get total raking control with a spacious overhead design that eliminates hay from twisting around the frame, and 40 rugged teeth per wheel to gather fluffier hay. And the WR33 and WR34 Series rakes offer maximum maneuverability to work every area of your land. Plus, they handle crop gently to minimize crop damage and leaf loss. Best of all, we ve replaced the center kicker wheel with an optional three-wheel expansion for full-width raking. The WR33 Series Overhead Frame Wheel Rakes are available in four rugged models: the 10-, 12-, 13-, and 15-wheel options with raking widths of up to 25-feet. Each model folds to 10-feet 4-inches wide for easy transporting when it s time to move on to the next job. The Frontier Overhead Frame Wheel Rakes are sold and supported by John Deere dealers, the most trusted name in farm, ranch and lawn equipment. To help you select the right model of Frontier Overhead Frame Wheel Rakes talk to your local John Deere dealer, your exclusive source of Frontier Equipment. www.buyfrontier.com And for larger haymaking chores, the WR34 Series Overhead Frame Wheel Rakes come in 14-, 16-, 17-, and 19-wheel options with raking widths of up to 34-feet 6-inches. The WR34 Series offers a 12-foot 5-inch transport width for your convenience.
high-capacity haymaking. Two tandem axle walking beams and large flotation tires allow the rake to stay level over rough terrain, avoiding hay loss and reducing soil compaction to provide a smoother ride. (Optional on WR3310; standard on other models.) The WR33 Series offers simple windrow width adjustments up to 46 inches. Featuring a 55-inch wheel diameter and 40 tough steel tines per wheel, the WR33 Series gives you faster drydown and more uniform windrows before baling. Single or dual cylinders adjust the width of your rake to match your other equipment. The turnbuckle feature levels the rake and helps you set the hitch height to your tractor drawbar. The rake beam angle lets you adjust the rake beams to effectively manage raking width and windrow width. Angle adjustments help you match the rake to crop conditions to move hay easier and collect a greater volume of hay. The WR34 Series offers a 5-position control. Or for greater flexibility, the WR33 Series provides a 7-position control The rugged, overhead frame is designed to give you maximum clearance when raking, so you get fluffy windrows without wrapping hay around the frame.
Pull the rake wheel lock-up pins to lift rake arms and release the 3-wheel expansion for efficient center windrow raking. And with the down pressure adjustment, you can control how smooth or aggressive the rake wheels move over terrain. The adjustable down-pressure is used for fine-tuning the rake to your crop conditions. For light hay, use less down-pressure. Or for heavier hay, more down-pressure. When you minimize down pressure, you extend the life of your rake tines and decrease dirt and debris from the windrow. Adjust windrow width on the WR34 Series up to 94 inches. Plus, with a 60-inch wheel diameter and 40 powerful tines per wheel, you can tackle heavy crops with minimal leaf loss.
Premium wheel rakes for high-quality results. Specifications Models WR3310 WR3312 WR3313 Number of Rake Wheels 10 12 13 Wheel Diameter (inches) 55 55 55 Teeth Per Wheel 40 40 40 Tooth Diameter.275 in. (7.0 mm).275 in. (7.0 mm).275 in. (7.0 mm) Transport Width 10 ft. 4 in. 10 ft. 4 in. (3.1 m) 10 ft. 4 in. (3.1 m) Transport Length 19 ft. 10 in. 23 ft. (7.0 m) 28 ft. 4 in. (8.6 m) Windrow Width Adjustment Up to 46 in. (1.2 m) Up to 46 in. (1.2 m) Up to 46 in. (1.2 m) Raking Width Up to 22 ft. (6.7 m) Up to 25 ft. (7.6 m) Up to 22 ft. (6.7 m) Raking Wheel Hubs Tapered roller bearings Tapered roller bearings Tapered roller bearings Hitch Jack Standard Standard Standard Standard Transport Wheels Two 6.70 x 15 Four ST175/80D13 Four ST175/80D13 Optional Transport Wheels Four ST175/80D13 N/A N/A Weight 2,290 lb. (1,039 kg) 2,673 (1,213 kg) 2,798 (1,269 kg) Rake Wheel Wind Guards N/A N/A N/A Transport/Work Lights Standard Standard Standard Horsepower Requirements 40 HP (30 kw) 40 HP (30 kw) 40 HP (30 kw) Hydraulic Requirements 1 double-acting Electrical Requirements Frontier Overhead Frame Wheel Rakes meet applicable ASABE safety standards.
WR3315 WR3414 WR3416 WR3417 WR3419 15 14 16 17 19 55 60 60 60 60 40 40 40 40 40.275 in. (7.0 mm).295 in. (7.5 mm).295 in. (7.5 mm).295 in. (7.5 mm).295 in. (7.5 mm) 10 ft. 4 in. (3.1 m) 12 ft. 5 in. (3.8 m) 12 ft. 5 in. (3.8 m) 12 ft. 5 in. (3.8 m) 12 ft. 5 in. (3.8 m) 31 ft. 6 in. (9.6 m) 26 ft. 5 in. (8.1 m) 29 ft. 4 in. (8.9 m) 34 ft. 8 in. (10.6 m) 37 ft. 7 in. (11.5 m) Up to 46 in. (1.2 m) Up to 94 in. (2.4 m) Up to 94 in. (2.4 m) Up to 94 in. (2.4 m) Up to 94 in. (2.4 m) Up to 25 ft. (7.6 m) Up to 31 ft. (9.5 m) Up to 34 ft. 6 in. (10.5 m) Up to 31 ft. (9.5 m) Up to 34 ft. 6 in. (10.5 m) Tapered roller bearings Ball bearings Ball bearings Ball bearings Ball bearings Standard Standard Standard Standard Standard Four ST175/80D13 Four 6.70 x 15 Four 6.70 x 15 Four tandem 6.70 x 15 Four 6.70 x 15 N/A N/A N/A N/A N/A 3,023 (1,371 kg) 4,140 (1,878 kg) 4,400 (1,996 kg) 4,540 (2,059 kg) 4,800 (2,177 kg) N/A Optional Optional Optional Optional Standard Standard Standard Standard Standard 40 HP (30 kw) 40 HP (30 kw) 40 HP (30 kw) 40 HP (30 kw) 40 HP (30 kw) remote for main frame open and close; 1 single-acting remote for rake wheel lift 12-volt power source if equipped with hydraulic beam-angle kit This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL JOHN DEERE DEALER FOR DETAILS. Frontier Equipment reserves the right to change specifications, design and price of products described in this literature without notice. Copyright 2009, Frontier Equipment. www.buyfrontier.com DSFE41093 Litho in U.S.A. (09-01) To order this literature from JDPoint, please use the following part number: 5HPDSFE41093