CAV / LUCAS / DELPHI rotary pumps

MarbedBook20 CAV / LUCAS / DELPHI rotary pumps CAV / LUCAS / DELPHI rotary pumps Pumps equipment

www.marbed.com CAV / LUCAS / DELPHI rotary pumps Pumps equipment Pump service brackets Cushioned Coupling Tools for DPA Tools for DPS Tool box for DPC/DPCN pumps Other tools Tool box for DP200 pumps Tools for EPIC pumps Comparator bearings Advance gauge CAV / LUCAS / DELPHI ROTARY PUMPS 3-5 6 7-6 7-22 23-30 3-34 35-38 39 40-45 46-47

www.marbed.com 9356-A Swivel vice for flanges BOSCH PES..A, VE, VA pumps Swivel vice for operative flanges of PES...A, VE, VA pumps etc. 9356-A New base can be used with: 832 Operative flange for CP common rail pumps to be applied on 832 830 0 986 62 794 Ø 68 mm. Ø 50 mm. Operative flange for DPS pumps to be applied on 832 9669 CAV 804-4 CAV 804-40 222.R0-3

Pump clamping flanges 9680-A BH 688 00 24 960 BH 0 986 6 358 KDEP2963 9356-A Cradle bracket on test bench Swivel vice cradle on 9260 Swivel vice on 832 Test bench flange for PES...A pumps (on FIAT) 9478-B BH 685 720 07 Test bench flange for PES...P-PV pumps with Ø 95 hole 9478-C BH 685 720 060 Test bench flange for PES...P pumps (IVECO 90.26) with Ø 07 hole 9479-D BH 685 720 59 Test bench flange for PES... MW pumps (MERCEDES, VOLVO etc.) with Ø 68 hole 9478-A BH 685 720 08 BH 685 720 07 Test bench flange for EP/VA.. VE.. CAV pumps with Ø 50 hole 9478 BH 685 720 062 Test bench flange for CAV-DPS pumps with Ø 68 hole FORD TRANSIT 9478-E BH 685 720 29 222.R0-4

PUMP CLAMPING FLANGES Test bench flange for VP44-VR30 pumps 823 Test bench flange for VP44 pumps 9478-T Test bench flange for CATERPILLAR pumps SLIV series with Ø 68 hole 9478-F Test bench flange for pumps mounted on RENAULT MEGANE 9478-M Ø 74 Test bench flange for BOSCH PES...RSF...M pumps on BOSCH test bench MERCEDES 90 D 9746 BH 685 720 208 Flange for fixing ZEXEL VP pumps on test benches. It requires the universa bracket 9680-A 823-A Flange for Test bench for Common Rail pumps with 50mm hole, 3 holes. 9478-CR 222.R0-5

www.marbed.com 9659 Cushioned Coupling for CAV-DPA-DPS- DPC-BOSCH VE A Cushioned puller coupling for CAV DPA, DPS, DPC and BOSCH VE pumps adaptable to all test benches by 9680-A (A) supplied with 3 gears 9659 DPC gear - cone Ø 7 9659-I7 DPS gear - cone Ø 20 9659-I20 DPA CAV female gear - external Ø gear 35,5 9659-IDPA DPA CAV gear NOT INCLUDED optional 9872 222.R0-6

www.marbed.com 9662 9662 - TOOL BOX FOR CAV-DPA ROTARY PUMPS Complete tool box for assembly and disassembly of CAV-DPA rotary pumps with mechanical and hydraulic governor 30 items, 60 particulars 9662 222.R0-7

9662 Tools for CAV-DPA rotary pumps 9573 9664-C 92 9656 9565 9555-A 900 900-A 9652 9567 965 9097 9650 9649 9272-A 9274 6 Items Advance gauge for CAV - DPA pumps Advance gauge for CAV - DPA pumps Drive plate srew Manometer for pump feed pressure Roller distance gauge on control plate Wrench for cam pin Connector for diesel oil inlet Connector for diesel oil inlet Connector Polygonal wrench Spanner transfer pump rotor Pressure connector Drive shaft holding tool Spanner drive plate Governor counter weight balancer Bush for oil seal assembly 222.R0-8

Kit composed by 9 OR guard bushes Assembly bush for governor cap Assembly rod for metering valve Governing wrench Sleeve puller Oil seal puller Alignement tool, hydraulic head Alignement tool Torque adaptor Reduction union Reduction union Reduction Drilled unions Blind cap Blind cap 3 Items 9663 9275 9276 9277 9278 9279 9282 9283 9284 9290 929 9285 9292 9293 9294 222.R0-9

9662 - TOOL BOX FOR CAV-DPA ROTARY PUMPS Advance gauge for CAV - DPA pumps 9573 CAV 7244-59 CAV 7244-70 9573 is replaced by 9664-C Advance gauge for CAV - DPA pumps 9664-C 804-8 Torque adaptor, drive plate screws 92 CAV 744-482 CAV 7244-404 0-6 BAR manometer for feeding pressure pump 9656 Roller distance gauge on control plate with air pressure 9565 CAV 744-262 Wrench for cam ring pin 9555-A CAV 7244-25 B 4 x,5 mm. /2" 4 x,5 mm. Diesel oil inlet union 4 x,5 - /2'' Diesel oil inlet union 4 x,5-7/6' 900 900-A 7/6" 8 x 4 x,5 mm. Manometric reduction union to set the internal pressure 4 x,5-8 x 9652 CAV 7044-892 /4'' polygonal wrench for cap screws 9567 222.R0-0

9662 - TOOL BOX FOR CAV-DPA ROTARY PUMPS Spanner transfer pump rotor 965 CAV 7044-889 Extended pressure union for bench testing 2 x,5 - '' 9097 Drive shaft holding tool Ø 7 9650 CAV 744-773 Spanner drive plate 9649 CAV 744-744 Governor counter weight balancer 9272-A Bush for oil seal assembly 9274 CAV 744-260 A Kit with 9 OR guard bushes 9663 9663-A 9663-B 9663-C 9663-D 9663-E 9663-F 9663-G 9663-H 9663-I Ø 6,5-29 mm Ø 0,5-44 mm Ø 2,5-38 mm Ø 3-23,5 mm Ø 5-47 mm Ø 6,5-44 mm Ø 20-42 mm Ø 23,2-26,5 mm Ø 24,5-80 mm Assembly bush for governor cap 9275 Assembly rod for metering valve 9276 CAV 7044-895 222.R0 -

9662 - TOOL BOX FOR CAV-DPA ROTARY PUMPS Governing wrench for squirt feed pressure 4 x,5-3/32'' 9277 CAV 7244-57 Sleeve puller 9278 CAV 744-875 Oil eal puller 9279 CAV 7244-334 Alignment tool, hydraulic head 9282 CAV 744-508 B Alignment tool, oversize hydraulic head 9283 CAV 744-508 C Torque adaptor 8 mm drive shaft screw 9284 CAV 744-26 Reduction for wrench 9277 4 x,5-7/6'' Reduction for wrench 9277 4 x,5 - /2'' Reduction M 2 x,5 - F 2 x,5 9290 929 9285 Drilled union 4 x,5 9292 Blind cap 7/6'' 9293 Blind cap /2'' 9294 222.R0-2

www.marbed.com 920-S 920-S - TOOL BOX FOR CAV ROTARY PUMPS Tool box for assembly and disassembly of CAV rotary pumps 6 items, 23 particulars 920-S 222.R0-3

920 S Tools for CAV rotary pumps 9573 9664-C 92 9272 9029 9555 900 900-A 9652 9675-A 965 9097 9650 9649 9273 9653 9654 6 Pieces Advance gauge for CAV - DPA pumps Advance gauge for CAV pumps Drive plate srew Governor counter weight balancer Toothed coupling for pump motoring over Governing wrench Connector for diesel oil inlet Connector for diesel oil inlet Connector Connector Spanner transfer pump rotor Pressure connector Drive shaft holding tool Spanner drive plate Puller hook Wrench Wrench 222.R0-4

920-S - TOOL BOX FOR CAV ROTARY PUMPS Advance gauge for CAV - DPA pumps 9573 CAV 7244-59 CAV 7244-70 9573 is replaced by 9664-C Advance gauge for CAV pumps 9664-C 804-8 Torque adaptor, drive plate screws 92 CAV 744-482 CAV 7244-404 Governor counter weight balancer 9272 Toothed motoring coupling 9029 ex Marbed 9900 Socket inserter torque spanner cam advance 9555 CAV 7244-25 B 4 x,5 mm. Diesel oil inlet union 4 x,5 - /2'' 900 /2" 4 x,5 mm. 7/6" Diesel oil inlet union 4 x,5-7/6' 900-A 8 x 4 x,5 mm. Manometric reduction union to set the internal pressure 4 x,5-8 x 9652 CAV 7044-892 222.R0-5

920-S - TOOL BOX FOR CAV ROTARY PUMPS 8 x 4 x,5 mm. Manometric reduction union to set the internal pressure 4 x,5-8 x 9675-A Spanner transfer pump rotor 965 CAV 7044-889 Extended pressure union for bench testing 2 x,5 - '' 9097 Drive shaft holding tool 9650 CAV 744-773 Spanner drive plate 9649 CAV 744-744 Removal hook 9273 CAV 7244-408 Socket wrench 5/6'' 9653 9654 Socket wrench 3/32'' 222.R0-6

www.marbed.com 973-B 973-B - TOOL BOX FOR CAV-DPS PUMPS Complete tool box for assembly and disassembly of CAV-DPS pumps (FORD TRANSIT I.D. - FORD YORK - VW GOLF) 3 items, 5 particulars 973-B 222.R0-7

973-B Tools for CAV-DPS pumps 9288 9303 9304 9667 9305 9570 9290 929 9570-A 976-A7 9306 930 936 9674 976-A8 967 9329 9728 9330 9782 9669 9865 9866 9332 9855 9856 9859 9860 9572 9572-A Pezzi Auto advance gauge Gauge Adaptor Pressure measuring kit OR bush Timing disk bubble Wrench Reduction union Reduction union Wrench Torx T25 Torx T20 Torx T5 Torx T0 Timing retainer Dial gauge bearing Inserter Toothed wrench Toothed wrench Oil seal guide Timing pin Operative plate Coupling Puller Inserter DPS adjusting wrench DPS adjusting wrench Spring adjusting wrench Spring adjusting wrench Accelerator lever survey FORD TRANSIT modification 222.R0-8

973-B - TOOL BOX FOR CAV-DPS PUMPS A B A B CAV 7244-572 CAV 7244-435 Auto advance device for DPS pumps (0 pieces) Bare reduction for YORK - FORD TRANSIT Set of 8 gauges (A-H) 9664-B CAV 7244-447 CAV 7244-572 CAV 7244-435 9288 Internal pressure gauge 0-2,5 BAR with bumper gliceroil Gauge kit for DPS pumps 9304 CAV 7244-275 A Transfer pressure adapter 9303 CAV 7244-382 Bush couple - for advance shaft OR mm 6,2 x 30 and for extra shaft mm 7,2 x 25 9667 CAV 7244-44 CAV 7244-442 Timing disk bubble 9305 ARD 20/ TORX T25 wrench with,5 mm hole 976-A7 CAV 7244-437 TORX T20 wrench 9306 CAV 7244-438 TORX T5 wrench 930 CAV 7244-439 TORX T0 wrench 936 CAV 7244-439 A 222.R0-9

973-B - TOOL BOX FOR CAV-DPS PUMPS Adjusting wrench 3/32'' - union 4 x,5 9570 CAV 7244-57 Adjusting wrench 3/32'' union 2 x,5 9570-A CAV 7244-40 A 7/6" 4 x,5 mm Reduction union 4 x,5-7/6'' 9290 /2" 4 x,5 mm Reduction union 4 x,5 - /2'' 929 Timing lock for CAV-DPS pumps 9674 CAV 7244-448 8 x Ø 4 Ø 4 40 58 Comparator bearing in 4 pieces for the timing of CAV-DPS pumps and without reduction for BOSCH EP...VE pumps 976-A8 222.R0-20

973-B - TOOL BOX FOR CAV-DPS PUMPS oil seal inserter DPS pump drive shaft Ø 7 967 CAV 7244-445 CAV 7244-445 A Ø 6 mm. Toothed wrench /2''for CAV-DPS pump cam screw (FORD TRANSIT) 9329 CAV 7244-573 Ø 9 mm. Toothed wrench couple control for DPS pump (FORD TRANSIT) 9728 Ø 4 mm. Oil seal guide 9330 CAV 7244-485 Time holding pins (FORD TRANSIT D.I.) 9782 Ø 68 mm. Ø 50 mm. Operative plate for CAV-DPS mm 68 and adaptor ring for DPC pumps mm 50 9669 CAV 804-4 CAV 804-40 Nylon oil seal inserter Ø 20 9332 V 706 V 62/B LDA adjusting wrench on CAV-DPS Turbo 9855 CAV 7244-586 222.R0-2

3 holes coupling for DPS pumps, direct injection 9865 ADC 60 Motoring hub puller Ø 74 To be used with pneumatic gun 9866 LDA adjusting wrench on CAV-DPS Turbo 9856 CAV 7244-584 Spring LDA adjusting wrench on CAV-DPS Turbo 9859 CAV 7244-582 Spring LDA adjusting wrench on CAV-DPS Turbo 9860 CAV 7244-58 Graduated checking to survey the total travel of the CAV-DPS pumps accelerator lever 9572 CAV 7244-4 Modification for 9572 to survey the travel from the position of the antistopping screw to the naximum screw on CAV-DPS (ex.: FORD TRANSIT) 9572-A CAV 7244-583 222.R0-22

www.marbed.com 973-C 973-C - TOOL BOX FOR CAV-DPC PUMPS Tool box for assembly, disassembly and timing of CAV-DPC pumps 7 articles - 23 particulars 973-C 222.R0-23

973-C Tool box for CAV-DPC pumps 9664-C 9670 967-A 9673 9672 9675 9666 9295 9676 9678 9339 934 9837-A 9842 9832 9344 9362 Advance gauge Stopping lever adjuster Oil seal inserter Adjusting wrench Wrench Manometric reduction Slot wrench Wrench Wrench Wrench Hydraulic head support Kit for manometer 3 plug assembly External ring puller Internal ring puller Internal pressure union Bush puller 222.R0-24

973-C - TOOL BOX FOR CAV-DPC PUMPS Advance gauge for CAV-DPC pumps 9664-C CAV 804-8 Stopping lever adjuster for CAV-DPC pumps 9670 CAV 744-559A Oil seal inserter for pump drive shaft 967-A Adjusting wrench with guide 4,85 mm 9673 CAV 804-444 Wrench with scale for diesel oil delivery adjusting 9672 CAV 804-423 Manometric reduction for transfer pressure thread 8 x,25 9675 CAV 804-442 Slot wrench for auto advance nut /2 '' 9666 CAV 804-40 4 mm hexagonal wrench for diesel oil inlet unions for CAV-DPA-DPC pumps 9295 8 mm shaped wrench for CAV-DPC pumps 9676 222.R0-25

973-C - TOOL BOX FOR CAV-DPC PUMPS 9678 Wrench for motoring gear Ø 35,5 9339 Hydraulic head support CAV 804-47 934 Kit for gauge to survey the internal pressure 9837-A B D Three nylon plugs (our arts. 9837-809-B, 9837-809-D, 9837-809C) for manual bearing insertion CAV-DPC, DPS CAV 804-809 B CAV 804-809 C CAV 804-809 D C External ring puller for CAV-DPC pump bottom 9842 Puller for the bearing internal ring CAV-DPC 9832 Union for internal pressure 9344 CAV 804-447 B Bush puller 9362 CAV 804-800 222.R0-26

www.marbed.com 973-N 973-N - TOOL BOX FOR LUCAS DPC PUMPS Tool box for LUCAS DPC / NUMERIC pumps 973-N 222.R0-27

973-N Tool box for LUCAS DPC pumps 8040 8027 8028 8029 8030 803 8032 8033 9996 9998 9998-A 8034 8035 8036 Equalizer Adapter Adapter Adapter Timing control pin Timing control pin Advance piston positioner Wrench Wrench Puller Coupling Accelerator lever register Wrench Stopper 222.R0-28

973-N - TOOL BOX FOR LUCAS DPC PUMPS Equalizer for stroke control 8040 V638 Adapter 8027 Adapter 8028 Adapter 8029 CAV 804-6 Timing control pin 8030 CAV 804-626 Timing control pin 803 CAV 804-66 Advance piston positioner 8032 CAV 804-649 222.R0-29

973-N - TOOL BOX FOR LUCAS DPC PUMPS Solenoid wrench 8033 (ex 953-A) Triangular wrench for pump plug CAV-DPC (FIAT MAREA, CITROEN) 9996 CAV 804-624 Motoring hub puller with 3 holes for DPC - BOSCH VE pumps on VW POLO 900, GOLF TD 9998 Coupling for motoring hub with 3 holes for DPC - BOSCH VE pumps on VW POLO 900, GOLF TD 9998-A Accelerator lever register 8034 Tightening wrench for inspection plastic plug 8035 CAV 804-625 Roller bearing stopper 8036 CAV 804-650 222.R0-30

Other tools 24 mm hexagonal wrench for solenoid valve for CAV DPC and BOSCH VE pumps 953 24 mm poligonal wrench for solenoid valve for BOSCH VE pumps 9467 26 mm wrench for solenoid valve on CAV DPC NUMERIC 953-A 8033 27 mm wrench for CAV DPC NUMERIC pumps advance actuator 953-B 24 mm wrench for CAV DPC NUMERIC pumps advance actuator 953-C Triangular 25 mm wrench for pump plug on CAV DPC NUMERIC pumps 9996 CAV 804-624 9/6'' shaped wrench for CAV pumps delivery onions 9297 5/8'' wrench for CAV pumps delivery unions 9695 9/6'' wrench for CAV pumps delivery unions 9696 3/6'' wrench for CAV DPA shaft nut 9677 8 mm shaped wrench for CAV DPC-DPS pumps 9676 222.R0-3

OTHER TOOLS Motoring coupling for Ø 7 gear CAV DPA pumps 9408 Motoring coupling for CAV DPA pumps 9029 Fixing gear wrench Ø 7 9650 CAV pumps gear 9872 Operative plate to fix to the vice CAV DPA DPC pumps Ø 48 and Ø 50 923 4 mm wrench for diesel oil inlet unions for CAV DPA DPC pumps 9295 Elastic rings puller for CAV pumps 9296 Vacuum gauge 0/76 mm Hg Ø 63-3/8 gas with reduction and shaped pipe 9657 0/76 mm Hg vacuum gauge 9302 Angular pipe for vacuum gauge and gauge 3/8 gas connection 9658 222.R0-32

OTHER TOOLS Fixing cap wrench /4'' 9568 Polygonal wrench 3/8'' - 7/6'' 9568-A Tweezers 9648 CAV 7244-277 Assembly composed by 6 pieces to survey the internal pressure of CAV DPA-DPC-DPS pumps 9665 Long feeler pin assembly 9647-A Toothed wrench for hexagonal nuts to fix diesel oil inlet unions used for CAV pumps 9566 360 goniometric disk for the timing of CAV DPA, DPC, DPS pumps equipped with 9668 2 Insert to time CAV DPA, DPC, DPS pumps Reduction rings Checking plate for CAV DPC timing with indicator shaft (to connect with the diesel oil inlet union) 222.R0-33

OTHER TOOLS A B B A 2 x,5 mm. 4 x,5 mm. /2" 7/6" 3/32" 9570-A 9570 - - 7244-40A 7244-57 7/32" - - 9570-B 9570-C 744-499 744-499G 3 mm 8059 8058 - - 222.R0-34

www.marbed.com 973-DP 973-DP - TOOL BOX FOR LUCAS DP200 PUMPS Tool box for LUCAS DP200 pumps 973-DP 222.R0-35

973-DP Tool box for LUCAS DP200 pumps 8058 8059 8060 806 8062 8063 8064 8065 8066 8067 8068 8069 8070 804 8042-A Pieces Adjusting wrench Adjusting wrench Connector Reduction Reduction Wrench Wrench Puller Reduction plate Wrench Puller Wrench Wrench Reductions kit Connectors kit 222.R0-36

973-DP - TOOL BOX FOR LUCAS DP200 PUMPS Adjusting wrench 4 x,5-3 screws 8058 Adjusting wrench 2 x,5-3 screws 8059 Connector 8060 Reduction 806 CAV 7244-63 Reduction for electronic degrees tester 8062 Toothed bush wrench 8063 Toothed bush wrench 8064 Puller 8065 Reduction plate for mounting the disk to the cone shaft 7 and 20 with rigging 8066 CAV 7244-578 222.R0-37

973-DP - TOOL BOX FOR LUCAS DP200 PUMPS Wrench 8067 CAV 6408-78 Puller 8068 Wrench for head screw 8069 Wrench for head 8070 CAV 744-939 Reductions kit for degrees tester 9 pieces 804 Connectors kit 6 pieces 8042-A 22 x 4,5-30 x 5-38 x 5 h.7-38 x 5 h.4-45 x 7 35 x 20 h.2-43 x 9-50 x 6,5-45 x 6,8-56 x 6,8-65 x 5-60 x - 40 x - 46 x 24 h.6,5-46 x 24 h-0-62 x 2 222.R0-38

Tools for LUCAS Epic pumps Ejector of LUCAS EPIC 2nd serie pumps on MERCEDES C 220 88 Bolt with spring Ø 6,5 mm for EPIC 70 pumps phasing on MERCEDES 9760-A 222.R0-39

www.marbed.com 976-A 976-A - COMPARATOR BEARING BOX FOR ROTARY PUMPS Comparator bearing box for the timing of rotative pumps to use on test bench or directly on the vehicle. BOSCH EP...VA...VE, CAV DPA, DPC, DPS and ROTODIESEL. (ALFA, AUDI, CITROEN, LANCIA, PEUGEOT, RENAULT, SAAB, VOLKSWAGEN, VOLVO, etc.) and medium tracks. 2 items, 23 pieces 976-A 222.R0-40

976-A Comparator bearings for rotary pumps 9733-A 986 976-A 986-N 976-A2 976-A3 976-A4 976-A5 976-A6 9674 976-A7 976-A8 Comparator Comparator bearing Timing pin Comparator bearing - not sold alone Comparator bearing Nut Nut couple Reduction Comparator bearing Timing lock Torx wrench Comparator bearing 222.R0-4

976-A - COMPARATOR BEARING BOX FOR ROTARY PUMPS Centesimal comparator 5 mm with back connection (B) 9733-A B Comparator bearnig for BOSCH VA pumps New comparator bearing (mm. 30). It has a new fast method for the timing of CAV ROTO DIESEL pump "B" index with access to the timing references by the cap pump. The pump cap has a timing bush with a clogging plug. On this plug You will find incised the rod stroke value. This value correspond to the timing value to P.M.S. With this new system it is possible to eliminate the corner transmission, the rod fixing and in this way there is no need to empty the pump casing for the stroke checking. 986 804-606 804-607 804-600 Comparator bearing BOSCH EP/VA...B pumps thread 2x with shaft 25 mm Ø 2 thread 2,5 (our art 5-D4) Timing pin on ROTO DIESEL 986-N KDEP 2940 NOT SOLD ALONE 976-A 084-76 Couple of dial indicator for ROTO DIESEL pumps 976-A2 084-767 Fixing nut for flange comparator 976-A3 084-764 Nut couple to fix to the pump the comparator bearing (976-A2) 976-A4 084-766 222.R0-42

976-A - COMPARATOR BEARING BOX FOR ROTARY PUMPS Comparator reduction from 3 mm to 2,5 mm 976-A5 D E A Comparator bearing for timing searching on CAV-DPC (5 pieces) 976-A6 B A 804-486 Angle bracket 976-B C B C 804-487 804-488/A Union Push rod with guide (54mm) 976-C 976-D D 804-489 Distance ring 976-E E 804-49 Equalizer comparator bearing 976-F Operation outline of the tools for the timing of CAV-DPC pump. (For CAV-DPS you need only the spring pin included). Notice: the rotation of the driving shaft that will be later locked, will point out the lift of the shaft inserted in the elastic ring of pump. Refering to the obtained level you will locate the injection pump with the locking of bolts. TORX T25 wrench con with,5 mm hole for DPS pumps 976-A7 CAV 7244-437 Timing lock for CAV-DPS pumps 9674 CAV 7244-448 Comparator bearing composed by 4 pieces for the timing of CAV-DPS pumps and without reduction for BOSCH EP...VE pumps 976-A8 222.R0-43

www.marbed.com 976 976 - COMPARATOR BEARING BOX FOR CAV ROTARY PUMPS Comparator bearing box for rotative pumps CAV DPC, DPS 976 9733-A 976-A3 976-A6 9674 976-A7 9306 930 936 Pieces Comparator Nut Comparator bearing Timing lock Torx wrench Torx wrench Torx wrench Torx wrench 222.R0-44

976 - COMPARATOR BEARING BOX FOR CAV ROTARY PUMPS Centesimal comparator 5 mm with back connection (B) 9733-A B Fixing nut for flange comparator 976-A3 084-764 D E A Comparator bearing for timing searching on CAV-DPC (5 pieces) 976-A6 B A 804-486 Angle bracket 976-B C B C 804-487 804-488/A Union Push rod with guide (54mm) 976-C 976-D D 804-489 Distance ring 976-E E 804-49 Equalizer comparator bearing 976-F Operation outline of the tools for the timing of CAV-DPC pump. (For CAV-DPS you need only the spring pin included). Notice: the rotation of the driving shaft that will be later locked, will point out the lift of the shaft inserted in the elastic ring of pump. Refering to the obtained level you will locate the injection pump with the locking of bolts. Timing lock for CAV-DPS pumps 9674 CAV 7244-448 TORX T25 wrench con with,5 mm hole for DPS pumps TORX T20 wrench TORX T5 wrench TORX T0 wrench 976-A7 CAV 7244-437 9306 CAV 7244-438 930 CAV 7244-439 936 CAV 7244-439 A 222.R0-45

Advance gauge The universal body 9664-N can be applied on 5 different types of pumps, depending of the installed interface 9664-N Interface for DPS pumps 9664-F Interface for DPC pumps 9664-D Interface for DP200 pumps 9664-E Interface for VE pumps 9664-H 40 Interface for DENSO pumps 9664-S 42 Transparent body, spare part of 9664-N 9334 222.R0-46

9664 - ADVANCE GAUGE 9664-B Body Interface for DPS pumps 9664-N 9664-F Gauge for FORD TRANSIT Set of 8 gauges /A /B 9664-C Body Interface for DPC pumps 9664-N 9664-D 9664-DP Body Interface for DP200 pumps 9664-N 9664-E Set of 9 gauges 804 Repalce 947-0 - Up to 20 BAR 9664-VE Body Interface for VE pumps 9664-N 9664-H 9664-ND Body Interface for DENSO pumps 9664-N 9664-S 222.R0-47

www.marbed.com MARBED BOOK 20 20 MARBED S.r.l. - Italy This catalog is, to all intents, protected by copyright, so the reproduction in part or in full of photos, drawings, etc.. is prohibited. Original part numbers listed in this catalog are given for reference. The data and information, shown in this technical catalog, replace the previous edition that is now obsolete. All specifications, dimensions, weights in this catalog are subject to change without notice. The illustrations are not binding. www.marbed.com MARBED Srl - Piazza Novelli, 4-2029 Milano - Italy Tel. +39 02.7.49.84 - Fax +39 02.70.0.26.67 e-mail info@marbed.com