THINK COLD. THINK LARKIN. WAREHOUSE/INDUSTRIAL UNIT COOLER

Similar documents
Nomenclature. Table of Contents. BH A 850 C P A Vintage

Large Profile Unit Coolers

Medium Profile Unit Coolers

MEDIUM PROFILE UNIT COOLERS Technical Guide

MEDIUM PROFILE UNIT COOLERS Technical Guide. Models HMA Air Defrost HME/HML Electric Defrost HMG/HMF Hot Gas Defrost.

Low Profile Unit Coolers

Center Mount Unit Coolers

High Profile Evaporator

High Profile Evaporator

CONDENSED CATALOG 575 VOLT

LOW HEIGHT UNIT COOLER

Efficient solutions for commercial refrigeration

Low Profile Unit Cooler

MEDIUM SILHOUETTE UNIT COOLERS AIR AND ELECTRIC DEFROST MODELS

Lo-Profile Unit Coolers

LK-FCTB August 2010 (Replaces LK-FCTB,April 2007) FPO. Direct Drive Fluid Coolers Technical Guide. Models PFG & RF6

CAPACITY BTU/H FAN DATA MOTORS 240V AMPS

KEP. Extended Profile Evaporator CONTENTS PRODUCT DATA & INSTALLATION

CAL / CEL / CDL / CGL / CKL

LOW PROFILE UNIT COOLER

Next-Gen All-Temp Low Profile Unit Cooler

COMMERCIAL WALK-IN COOLERS AND FREEZERS

TMP. Medium Profile Evaporator CONTENTS PRODUCT DATA & INSTALLATION

50 Hz AIR - COOLED SPLIT SYSTEM. Products That Perform...By People Who Care AIR CONDITIONERS WITH SCROLL COMPRESSORS

2017 Price List. Krack Corporation Hussmann Corporation St. Charles Rock Rd. Bridgeton, MO Phone: Fax:

MEDIUM TEMP LOW PROFILE EVAPORATORS LB ELB Series

technical sales guide - 60Hz Ducted Split Units HIGH AMBIENT OPERATION 52 UPTO

Unit Cooler. Small to Medium Walk - Ins. Coolers & Freezer Applications

RCD Air Cooled Condensing Unit (50/60 Hz)

B Series Multi-Position & Hydronic Air Handlers Electric or Hot Water Heat, with available Variable-Speed High Efficiency ECM Motor

WATER COOLED HERMETIC & SCROLL CONDENSING UNITS 1/2 TO 6 HP

Next-Gen MiniCon 1/2 TO 6 HP MULTI-REFRIGERANT AIR COOLED CONDENSING UNITS

1/2 TO 6 HP MULTI-REFRIGERANT AIR COOLED CONDENSING UNITS

1. Air Handler Features Page Physical data Page Available kits Page Model nomenclature Page 5

Next-Gen MiniCon 1/2 TO 6 HP MULTI-REFRIGERANT AIR COOLED CONDENSING UNITS

Standard features. Optional features

Dual Discharge Evaporator (DX) Freon Applications 1-19 Tons MDN

Page Number. Contents: Product Features 2. Physical Data 2. Nomenclature. 3. Blower Performance 3. Electrical Data 4. Warranty.. 6

DESCRIPTION ACCESSORIES FIELD INSTALLED SPLIT-SYSTEM EVAPORATOR BLOWERS KBBU060, KDBC090, KCBC120 & KCBC180 5 THRU 15 NOMINAL TONS SUPPLY AIR PLENUMS

10AC DIPLOMAT SERIES RFC SYSTEMS

TOTALINE REFRIGERATION CONDENSERS

CFFWA Chilled/Hot Water Universal Mount Fan Coil 2-Pipe Heat / Cool Fan Coil 12,000-60,000 BTUH

BC Series Multi-position Air Handler Engineering and Specification Guide (Electric and Water Heat)

LK-FPTB July 2017 Replaces LK-TB-FP October FlexPack Multiple Compressor Condensing Units Technical Guide

M-SERIES MHP4 MODEL NUMBER GUIDE 3 M HP F P 1 ELECTRIC HEAT PUMP PACKAGED UNITS REVISION CODE

Standard features. Optional features

Unit Heaters. Catalog MANUFACTURERS HEATING PRODUCTS. Tel: (905) Fax: (905) OF HYDRONIC.

HBC SERIES-PSC MOTOR HBCX SERIES-ECM MOTOR

HEATING & COOLING COIL PRODUCTS

HE Series Evaporator Coils

12 CB30M SERIES UNITS INCLUDING ECB29 ELECTRIC HEAT

Product Data PH3Z 13 SEER SINGLE -PACKAGED HEAT PUMP SYSTEM WITH R -22 REFRIGERANT SINGLE AND THREE PHASE 2-5 NOMINAL TONS ( )

Direct Drive Fluid Coolers

Cubic unit cooler. SKB semi-industrial range

ARUF Series. Multi-Position, Multi-speed Air Handler with PSC Motor 1½ to 5 Tons. Contents. Product Features

MH1WC4W-08-1-B Chilled/Hot Water 1-Way Cassette Fan Coil

HS18 HS18 SERIES CONDENSING UNITS EXPANSION VALVE AIR CONDITIONING SYSTEM. 3.6 to 16.0 kw ( to Btuh) Cooling Capacity ENGINEERING DATA

Remote Air Cooled Condenser

Modular Variable Speed Air Handlers

TECHNICAL GUIDE SINGLE PIECE AIR HANDLERS FOR USE WITH SPLIT-SYSTEM COOLING & HEAT PUMPS DESCRIPTION FEATURES MODELS: AHR18 THRU 60* WARRANTY

DIRECT EXPANSION COMMERCIAL PACKAGED AIR HANDLING UNITS, 6 25 TONS

WE MAKE INDOOR AIR BETTER

Q7RE Series Single Packaged Heat Pump, Single Phase

A Division of Nailor International Inc. ECONOMY AIR HANDLERS

JT4BD Series 13 SEER TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 13 SEER, 8.0 HSPF 3 Phase Light Commercial High Efficiency, Heat Pump

HE Series Evaporator Coils

JT4BE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 14 SEER Residential System Ton Capacity WARRANTY

HS17. HS17 SERIES CONDENSING UNITS 17.6 to 65.2 kw ( to Btuh) Cooling Capacity. MATCHED REMOTE SYSTEMS 50hz ENGINEERING DATA

Complete HVAC Capability

Cubic unit cooler. SKB semi-industrial range

ACPSB-P Series 60Hz. Rooftop Units Cooling Capacity : 30 to 1360 MBH (9 to 398 kw) R22 R407C. Products that perform...

S3BN Series Split System Air Conditioner 10.3 EER Commercial System 7½ and 10 Ton Capacity R-22 Refrigerant

Q7RE Series Single Packaged Heat Pump, Single Phase

ELITE SERIES R-410A Ready - Multi-Position

Concealed Ducted Split Series R22

VT4BE Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. R-410A High Efficiency Heat Pump 14 SEER Residential System Ton Capacity WARRANTY

CH-HCUTB June Replaces CH-HCUTB, January HP Condensing Units Technical Guide. Scroll & Discus Models

Product Data. FF1E Base Series Fan Coil Sizes 018 thru 036 FEATURES

H-MSTB January Replaces H-MSTB, Oct M Series. AIR-COOLED CONDENSING UNITS 1/2-6 HP Indoor and Outdoor Models. Technical Guide MOH MOZ MOS

MAKING REFRIGERATION GREENER

R Series DUAL REFRIGERANT AIR COOLED CONDENSING UNITS 1/2 TO 6-1/2 HP

FCVC Series VERTICAL FAN COILS

Air Cooled Condensing Units - Technical Catalog. Featuring CopelandTM Compressors 404A and 507 Refrigerants

48CWA2-00 Chilled Water Fan Coil With or Without Electric Heat 2-Pipe Heat / Cool Fan Coil 48,000 BTUH

CHP

AVPTC. Multi-Position, Variable-Speed, ECM-Based Air Handler with Internal TXV ComfortNet Compatible 1½ to 5 Tons. Contents.

WATER SOURCE HEAT PUMPS

TECHNICAL GUIDE SINGLE PIECE STANDARD ECM AIR HANDLERS. DESCRIPTION

LUI / LUO. Condensing Units

VT4BF-KA/B Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. Ultra High Efficiency Heat Pump 16 SEER Residential System 2-5 Ton Capacity

HBC SERIES-PSC MOTOR HBCX SERIES-ECM MOTOR

Quantum Air REMOTE AIR COOLED CONDENSER. Publication No. WT-WDS-0816A

BAC / BHC Product Specifications

Product Data. Features/Benefits. 42BH System Fan Coil. 800 to 4000 Cfm

S5BP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

Precision Cooling For Business-Critical Continuity. Liebert CW. System Design Manual kW, 50 & 60Hz

Typical Applications. Horizontal Installation

G Series Air Cooled Condensing Units 1/2 to 6 HP Brochure September, 2011

V33B High Efficiency 360 Cassette Indoor Models - 60HZ

Consider The Possibilities...

Transcription:

Bulletin LH-02 August 2002 (Replaces LH-98, March 1998) THINK COLD. THINK LARKIN. WAREHOUSE/INDUSTRIAL UNIT COOLER

Warehouse/Industrial Unit Coolers Larkin introduces it s latest line of warehouse/industrial unit coolers for warehouse cooler/freezer applications. With a wider capacity range and the patented Thermo-Flex coil design, these warehouse/industrial unit coolers provide efficient, reliable operation. Larkin has designed many features and options into this product line to give you a superior heavy duty evaporator. Standard Features Aluminum cabinet with bonded white enamel finish for attractive appearance and durablility Thermoflex (five-year limited warranty) is innovative, eliminates leaks, reduces risk of refrigerant loss 850 rpm motors are quiet and reliable Liquid line solenoid wiring harness for faster installation Suction Schrader fitting for easier suction temperature measurement Hinged drain pan and access panels for easy servicing Captive fasteners on access panels for easy servicing no fumbling with loose bolts and nuts Adjustable defrost control can be customized per application Long air throw is ideal for large warehouse and industrial applications Standardized terminal board for easier field wiring Complete hot gas defrost model offering meets more applications Optional Features High CFM motor and fan combinations (208-230/3/60 and 460/3/60) Totally enclosed motors (208-230/3/60 and 460/3/60) Low temperature motors for blast cooling and freezing (-31 F to -50 F) Long air throw collars for large warehouse and industrial applications More factory mounted features for easier field installation (consult factory) Insulated drain pan Nomenclature Larkin Warehouse/ Industrial Unit Cooler Fins Per Inch/Defrost A6 = 6 FPI Air Defrost A8 = 8 FPI Air Defrost E6 = 6 FPI Electric Defrost L4 = 4 FPI Electric Defrost G6 = 6 FPI Hot Gas Defrost F4 = 4 FPI Hot Gas Defrost Capacity x 100 (standard motor/fan blade) Model Nomenclature LH A6 850 C P A Vintage Optional Motor Code T = Totally Enclosed Motors V = High CFM Option P = 3 Phase Motor Voltage Code B=208-230/1/60 M = 460/1/60 C = 208-230/3/60 X = 380-400/3/50 D= 460/3/60 Y = 200-220/1/50 E=575/3/60 Z = 200-220/3/50 2

Thermo-Flex Coil Design Larkin s innovative coil design utilizes a new and unique approach to coil expansion that virtually eliminates the possibility of leaks at tube sheets and coil supports. Our engineers conceived the design through intense analysis of the cause of common coil failures. Through the use of accelerated test procedures and computer simulation, our engineers pinpointed the primary stress points of a coil during its operation. The Thermo-Flex coil design for the unit cooler (patent #5,584,340) allows the coil to flex during periods of defrost which result in expansion of the coil surface. By eliminating the possibility of wear at critical stress areas, the integrity and longevity of the unit are dramatically increased. The result is a product which greatly enhances overall system reliability and reduces risk of costly refrigerant loss. To prove our claim, Larkin offers a five-year limited guarantee against leaks at tube sheets and center supports for all large unit coolers. Standard Features Units ship in upright position for ease of installation. Hinged access doors on both ends of the unit. Hinged drain pan for ease of servicing and cleaning. Electrical panel features solenoid wiring harness and color coded wiring connections on the terminal board. 3

60 Hz. Data Air Defrost Capacity & Electrical Data - 60Hz AIR CAPACITY FAN DATA STANDARD MOTOR DATA DEFROST BTUH / watts Total Amps 208-230/1/60 460/1/60 MODEL 10F TD DIA. AIR THROW Ft./m HP Wired Wired 208-230 Wired Wired 460 575 SIZE +25F SST CFM / m3h No. In./mm Std w/collar Ea. 1 phase 3 phase /3/60 1 phase 3 phase /3/60 /3/60 LHA6 520 52000 9000 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 15200 15300 610 21 26 LHA6 630 63000 9000 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 18500 15300 610 21 26 LHA6 750 75000 12600 3 24 70 85 1/2+ 9.6 5.5 7.8-3.0 3.9 2.7 22000 21400 610 21 26 LHA6 850 85000 12600 3 24 70 85 1/2+ 9.6 5.5 7.8-3.0 3.9 2.7 24900 21400 610 21 26 LHA6 930 93000 16800 4 24 70 85 1/2+ 12.8 8.7 10.4-4.7 5.2 3.6 27200 28600 610 21 26 LHA6 1100 110000 16800 4 24 70 85 1/2+ 12.8 8.7 10.4-4.7 5.2 3.6 32200 28600 610 21 26 LHA6 1170 117000 20700 3 30 100 115 1 - - 13.8 - - 6.9 7.8 34300 35200 762 30 35 LHA6 1400 140000 20700 3 30 100 115 1 - - 13.8 - - 6.9 7.8 41000 35200 762 30 35 LHA6 1610 161000 24300 3 30 100 115 1-1/2 - - 19.8 - - 9.9 7.8 47200 41300 762 30 35 LHA6 1900 190000 26550 3 30 120 140 1-1/2 - - 21.0 - - 10.5 8.4 55600 45100 762 37 43 LHA6 2200 220000 30400 4 30 120 140 1-1/2 - - 26.4 - - 13.2 10.4 64400 51700 762 37 43 LHA6 2440 244000 35400 4 30 120 140 1-1/2 - - 28.0 - - 14.0 11.2 71500 60200 762 37 43 8 FPI MODELS LHA8 2160 216000 25950 3 30 120 140 1-1/2 - - 21.0 - - 10.5 8.4 63300 44100 762 37 43 LHA8 2500 250000 29600 4 30 120 140 1-1/2 - - 26.4 - - 13.2 10.4 73200 50300 762 37 43 LHA8 2780 278000 34600 4 30 120 140 1-1/2 - - 28.0 - - 14.0 11.2 81400 58800 762 37 43 + 208-230/3/60 and 460/3/60 motors are 3/4 HP. Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) 4

Electric Defrost Capacity & Electrical Data - 60Hz. Standard Motor Data Defrost Heaters Electric Capacity Fan Data Total Amps Total Amps Defrost BTUH / watts 208-230/1/60 460/1/60 Model 10 F TD Standard Dia. Air Throw (Ft / m) HP Wired Wired 208-230 Wired Wired 460 575 208-23 460 575 Size -20 F SST CFM / m 3 h No. In./mm Std w/collar Ea. 1 phase 3 phase /3/60 1 phase 3 phase /3/60 /3/60 Watts /3/60 /3/60 /3/60 LHE6 450 45000 9000 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 9900 27.5 13.9 11.1 13200 15300 610 21 26 LHE6 550 55000 9000 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 9900 27.5 13.9 11.1 16100 15300 610 21 26 LHE6 640 64000 12600 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 12900 35.8 18.1 14.5 18700 21400 610 21 26 LHE6 740 74000 12600 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 12900 35.8 18.1 14.5 21700 21400 610 21 26 LHE6 810 81000 16800 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 17050 47.8 24.3 19.1 23700 28600 610 21 26 LHE6 950 95000 16800 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 17050 47.8 24.3 19.1 27800 28600 610 21 26 LHE6 1020 102000 20700 3 30 100 115 1 - - 13.8 - - 6.9 7.8 21400 64.2 32.1 22.8 29900 35200 762 30 35 LHE6 1200 120000 20700 3 30 100 115 1 - - 13.8 - - 6.9 7.8 21400 64.2 32.1 22.8 35100 35200 762 30 35 LHE6 1390 139000 24300 3 30 100 115 1-1/2 - - 19.8 - - 9.9 7.8 21400 64.2 32.1 22.8 40700 41300 762 30 35 LHE6 1650 165000 26550 3 30 120 140 1-1/2 - - 21.0 - - 10.5 8.4 33600 87.2 47.5 34.9 48300 45100 762 37 43 LHE6 2120 212000 35400 4 30 120 140 1-1/2 - - 28.0 - - 14.0 11.2 49600 128.4 70.0 56.0 62100 60200 762 37 43 4 FPI MODELS LHL4 400 40000 9400 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 9900 27.5 13.9 11.1 11700 16000 610 21 26 LHL4 480 48000 9400 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 9900 27.5 13.9 11.1 14100 16000 610 21 26 LHL4 560 56000 13200 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 12900 35.8 18.1 14.5 16400 22400 610 21 26 LHL4 650 65000 13200 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 12900 35.8 18.1 14.5 19000 22400 610 21 26 LHL4 710 71000 17600 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 17050 47.8 24.3 19.1 20800 29900 610 21 26 LHL4 840 84000 17600 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 17050 47.8 24.3 19.1 24600 29900 610 21 26 LHL4 890 89000 21600 3 30 100 115 1 - - 13.8 - - 6.9 7.8 21400 64.2 32.1 22.8 26100 36700 762 30 35 LHL4 1050 105000 21600 3 30 100 115 1 - - 13.8 - - 6.9 7.8 21400 64.2 32.1 22.8 30800 36700 762 30 35 LHL4 1220 122000 25200 3 30 100 115 1-1/2 - - 19.8 - - 9.9 7.8 21400 64.2 32.1 22.8 35700 42800 762 30 35 LHL4 1440 144000 27600 3 30 120 140 1-1/2 - - 21.0 - - 10.5 8.4 33600 87.2 47.5 34.9 42200 46900 762 37 43 LHL4 1860 186000 36800 4 30 120 140 1-1/2 - - 28.0 - - 14.0 11.2 49600 128.4 70.0 56.0 54500 62600 762 37 43 + 208-230/3/60 and 460/3/60 motors are 3/4 HP. Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 60 Hz. Data 5

60 Hz. Data Hot Gas Defrost Capacity & Electrical Data - 60Hz. Standard Motor Data Drain Pan Heaters (Std) * Hot Gas Capacity Fan Data Total Amps Total Amps Defrost BTUH / watts 208-230/1/60 460/1/60 Model 10 F TD Std. Dia. Air Throw (Ft / m) HP Wired Wired 208-230 Wired Wired 460 575 208-230 460 575 SIZE -20 F SST CFM / m 3 h No. In./mm Std w/collar Ea. 1 phase 3 phase /3/60 1 phase 3 phase /3/60 /3/60 Watts /1/60 /1/60 /1/60 LHG6 450 45000 9000 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 2100 9.2 4.6 3.7 13200 15300 610 21 26 LHG6 550 55000 9000 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 2100 9.2 4.6 3.7 16100 15300 610 21 26 LHG6 640 64000 12600 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 2700 11.8 5.9 4.7 18700 21400 610 21 26 LHG6 740 74000 12600 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 2700 11.8 5.9 4.7 21700 21400 610 21 26 LHG6 810 81000 16800 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 4000 17.4 8.7 6.9 23700 28600 610 21 26 LHG6 950 95000 16800 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 4000 17.4 8.7 6.9 27800 28600 610 21 26 LHG6 1020 102000 20700 3 30 100 115 1 - - 13.8 - - 6.9 7.8 4000 17.4 8.7 6.9 29900 35200 762 30 35 LHG6 1200 120000 20700 3 30 100 115 1 - - 13.8 - - 6.9 7.8 4000 17.4 8.7 6.9 35100 35200 762 30 35 LHG6 1390 139000 24300 3 30 100 115 1-1/2 - - 19.8 - - 9.9 7.8 4000 17.4 8.7 6.9 40700 41300 762 30 35 LHG6 1650 165000 26550 3 30 120 140 1-1/2 - - 21.0 - - 10.5 8.4 4200 18.2 9.1 7.3 48300 45100 762 37 43 LHG6 2120 212000 35400 4 30 120 140 1-1/2 - - 28.0 - - 14.0 11.2 6200 17.7++ 13.4 10.8 62100 60200 762 37 43 4 FPI MODELS LHF4 400 40000 9400 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 2100 9.2 4.6 3.7 11700 16000 610 21 26 LHF4 480 48000 9400 2 24 70 85 1/2+ 6.4-5.2 3.4-2.6 1.8 2100 9.2 4.6 3.7 14100 16000 610 21 26 LHF4 560 56000 13200 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 2700 11.8 5.9 4.7 16400 22400 610 21 26 LHF4 650 65000 13200 3 24 70 85 1/2+ - 5.5 7.8-3.0 3.9 2.7 2700 11.8 5.3 4.7 19000 22400 610 21 26 LHF4 710 71000 17600 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 4000 17.4 8.7 6.9 20800 29900 610 21 26 LHF4 840 84000 17600 4 24 70 85 1/2+ - 8.7 10.4-4.7 5.2 3.6 4000 17.4 8.7 6.9 24600 29900 610 21 26 LHF4 890 89000 21600 3 30 100 115 1 - - 13.8 - - 6.9 7.8 4000 17.4 8.7 6.9 26100 36700 762 30 35 LHF4 1050 105000 21600 3 30 100 115 1 - - 13.8 - - 6.9 7.8 4000 17.4 8.7 6.9 30800 36700 762 30 35 LHF4 1220 122000 25200 3 30 100 115 1-1/2 - - 19.8 - - 9.9 7.8 4000 17.4 8.7 6.9 35700 42800 762 30 35 LHF4 1440 144000 27600 3 30 120 140 1-1/2 - - 21.0 - - 10.5 8.4 4200 18.2 9.1 7.3 42200 46900 762 37 43 LHF4 1860 186000 36800 4 30 120 140 1-1/2 - - 28.0 - - 14.0 11.2 6200 17.7++ 13.4 10.8 54500 62600 762 37 43 + 208-230/3/60 and 460/3/60 motors are 3/4 HP. + + : This Model with 3 Phase Drain Pan Heaters * : Hot Gas Drain Pan Available Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 6

Electric Defrost High CFM Capacity & Electrical Data - 60Hz. Electric Capacity Fan Data Standard Motor Data Defrost Heaters Defrost BTUH / watts Total Amps Total Amps Model 10 F TD Std Dia. Air Throw (Ft / m) HP 208-230 460 208-230 460 575 Size -20 F SST CFM / m 3 h No. In./mm Std w/collar Ea. /3/60 /3/60 Watts /3/60 /3/60 /3/60 LHE6 450*V 49500 11300 2 24 85 100 2 12.0 6.0 9900 27.5 13.9 11.1 14500 19200 610 30 30 LHE6 550*V 60500 11300 2 24 85 100 2 12.0 6.0 9900 27.5 13.9 11.1 17700 19200 610 30 30 LHE6 640*V 70400 15900 3 24 85 100 2 18.0 9.0 12900 35.8 18.1 14.5 20600 27000 610 30 30 LHE6 740*V 81400 15900 3 24 85 100 2 18.0 9.0 12900 35.8 18.1 14.5 23800 27000 610 30 30 LHE6 810*V 89100 21200 4 24 85 100 2 24.0 12.0 17050 47.8 24.3 19.5 26100 36000 610 30 30 LHE6 950*V 104000 21200 4 24 85 100 2 24.0 12.0 17050 47.8 24.3 19.5 30500 36000 610 30 30 LHE6 1020*V 107100 23300 3 30 110 130 3 24.6 12.3 21400 64.2 32.1 22.8 31400 39600 762 30 40 LHE6 1200*V 126000 23300 3 30 110 130 3 24.6 12.3 21400 64.2 32.1 22.8 36900 39600 762 30 40 LHE6 1390*V 146000 27200 3 30 110 130 3 24.6 12.3 21400 64.2 32.1 22.8 42800 46200 762 30 40 LHE6 1650*V 174000 29700 3 30 130 150 3 24.6 12.3 33600 87.2 47.5 34.9 51000 50500 762 40 50 LHE6 2120*V 223000 39600 4 30 130 150 3 32.8 16.4 49600 128.4 70.0 56.0 65300 67300 762 40 50 4 FPI MODELS LHL4 400*V 42000 12200 2 24 85 100 2 12.0 6.0 9900 27.5 13.9 11.1 12300 20700 610 30 30 LHL4 480*V 50400 12200 2 24 85 100 2 12.0 6.0 9900 27.5 13.9 11.1 14800 20700 610 30 30 LHL4 560*V 58800 17000 3 24 85 100 2 18.0 9.0 12900 35.8 18.1 14.5 17200 28900 610 30 30 LHL4 650*V 68300 17000 3 24 85 100 2 18.0 9.0 12900 35.8 18.1 14.5 20000 28900 610 30 30 LHL4 710*V 74600 22600 4 24 85 100 2 24.0 12.0 17050 47.8 24.3 19.5 21800 38400 610 30 30 LHL4 840*V 88200 22600 4 24 85 100 2 24.0 12.0 17050 47.8 24.3 19.5 25800 38400 610 30 30 LHL4 890*V 91200 23800 3 30 110 130 3 24.6 12.3 21400 64.2 32.1 22.8 26700 40500 762 30 40 LHL4 1050*V 107600 23800 3 30 110 130 3 24.6 12.3 21400 64.2 32.1 22.8 31500 40500 762 30 40 LHL4 1220*V 125000 32800 3 30 110 130 3 24.6 12.3 21400 64.2 32.1 22.8 36600 55800 762 30 40 LHL4 1440*V 147000 30600 3 30 130 150 3 24.6 12.3 33600 87.2 47.5 34.9 43100 52000 762 40 50 LHL4 1860*V 190000 40800 4 30 130 150 3 32.8 16.4 49600 128.4 70.0 56.0 55600 69400 762 40 50 Note: High CFM models can handle external static pressure up to 1/2 of water Note: High CFM models are designed for operation below +15 F S.S.T. Note: CFM is at 0.0 external static pressure Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) 60 Hz. Data Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 7

60 Hz. Data Hot Gas Defrost High CFM Capacity & Electrical Data - 60Hz. Hot Gas Capacity Fan Data Standard Motor Data Drain Pan Heaters (Std) * Defrost BTUH / watts Total Amps Total Amps Model 10 F TD Std Dia. Air Throw (Ft / m) HP 208-230 460 208-230 460 575 Size -20 F SST CFM / m 3 h No. In. / mm Std w/collar Ea. /3/60 /3/60 Watts /1/60 /1/60 /1/60 LHG6 450*V 49500 11300 2 24 85 100 2 12.0 6.0 2100 9.2 4.6 3.7 14500 19200 610 30 30 LHG6 550*V 60500 11300 2 24 85 100 2 12.0 6.0 2100 9.2 4.6 3.7 17700 19200 610 30 30 LHG6 640*V 70400 15900 3 24 85 100 2 18.0 9.0 2700 11.8 5.9 4.7 20600 27000 610 30 30 LHG6 740*V 81400 15900 3 24 85 100 2 18.0 9.0 2700 11.8 5.9 4.7 23800 27000 610 30 30 LHG6 810*V 89100 21200 4 24 85 100 2 24.0 12.0 4000 17.4 8.7 6.9 26100 36000 610 30 30 LHG6 950*V 104000 21200 4 24 85 100 2 24.0 12.0 4000 17.4 8.7 6.9 30500 36000 610 30 30 LHG6 1020*V 107100 23300 3 30 110 130 3 24.6 12.3 4000 17.4 8.7 6.9 31400 39600 762 30 40 LHG6 1200*V 126000 23300 3 30 110 130 3 24.6 12.3 4000 17.4 8.7 6.9 36900 39600 762 30 40 LHG6 1390*V 146000 27200 3 30 110 130 3 24.6 12.3 4000 17.4 8.7 6.9 42800 46200 762 30 40 LHG6 1650*V 174000 29700 3 30 130 150 3 24.6 12.3 4200 18.2 9.1 7.3 51000 50500 762 40 50 LHG6 2120*V 223000 39600 4 30 130 150 3 32.8 16.4 6200 17.7+ 13.4 10.8 65300 67300 762 40 50 4 FPI MODELS LHF4 400*V 42000 12200 2 24 85 100 2 12.0 6.0 2100 9.2 4.6 3.7 12300 20700 610 30 30 LHF4 480*V 50400 12200 2 24 85 100 2 12.0 6.0 2100 9.2 4.6 3.7 14800 20700 610 30 30 LHF4 560*V 58800 17000 3 24 85 100 2 18.0 9.0 2700 11.8 5.9 4.7 17200 28900 610 30 30 LHF4 650*V 68300 17000 3 24 85 100 2 18.0 9.0 2700 11.8 5.3 4.7 20000 28900 610 30 30 LHF4 710*V 74600 22600 4 24 85 100 2 24.0 12.0 4000 17.4 8.7 6.9 21800 38400 610 30 30 LHF4 840*V 88200 22600 4 24 85 100 2 24.0 12.0 4000 17.4 8.7 6.9 25800 38400 610 30 30 LHF4 890*V 91200 23800 3 30 110 130 3 24.6 12.3 4000 17.4 8.7 6.9 26700 40500 762 30 40 LHF4 1050*V 107600 23800 3 30 110 130 3 24.6 12.3 4000 17.4 8.7 6.9 31500 40500 762 30 40 LHF4 1220*V 125000 32800 3 30 110 130 3 24.6 12.3 4000 17.4 8.7 6.9 147000 55800 762 30 40 LHF4 1440*V 147000 30600 3 30 130 150 3 24.6 12.3 4200 18.2 9.1 7.3 43100 52000 762 40 50 LHF4 1860*V 190000 40800 4 30 130 150 3 32.8 16.4 6200 17.7+ 13.4 10.8 + : This model with 3 Phase Drain Pan Heaters * : Hot Gas Drain Pan Available 55600 69400 762 40 50 Capacity Correction Factors for Electric and Hot Gas Defrost Units Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) Note: High CFM models can handle external static pressure up to 1/2 of water Note: High CFM models are designed for operation below +15 F S.S.T. Note: CFM is at 0.0 external static pressure Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 8

Air Defrost Capacity & Electrical Data - 50Hz Air Capacity Fan Data Standard Motor Data Defrost BTUH / watts Total Amps 220/1/50 380/1/50 Model 6 C TD Dia. Air Throw (Ft / m) HP Wired Wired Wired 380 Size -4 C SST CFM / m 3 h No. In. / mm Std w/collar Ea. 1 phase 1 phase 3 phase /3/50 LHA6 520 47800 8100 2 24 60 80 1/2+ 6.4 3.4-2.6 14000 23400 610 18 24 LHA6 630 58000 8100 2 24 60 80 1/2+ 6.4 3.4-2.6 17000 23400 610 18 24 LHA6 750 69000 11300 3 24 60 80 1/2+ 9.6-3.0 3.9 20200 32700 610 18 24 LHA6 850 78200 11300 3 24 60 80 1/2+ 9.6-3.0 3.9 22900 32700 610 18 24 LHA6 930 85600 15100 4 24 60 80 1/2+ 12.8-4.7 5.2 25100 43800 610 18 24 LHA6 1100 101200 15100 4 24 60 80 1/2+ 12.8-4.7 5.2 29600 43800 610 18 24 LHA6 1170 107600 18600 3 30 90 100 1 - - - 6.9 31500 53900 762 27 30 LHA6 1400 128800 18600 3 30 90 100 1 - - - 6.9 37700 53900 762 27 30 LHA6 1610 148100 21900 3 30 90 100 1-1/2 - - - 9.9 43400 63200 762 27 30 LHA6 1900 174800 23900 3 30 110 130 1-1/2 - - - 10.5 51200 69000 762 34 40 LHA6 2200 202400 27400 4 30 110 130 1-1/2 - - - 13.2 59300 79100 762 34 40 LHA6 2440 224500 31900 4 30 110 130 1-1/2 - - - 14.0 65800 92100 762 34 40 8 FPI MODELS LHA8 2160 198700 23400 3 30 110 130 1-1/2 - - - 10.5 58200 67500 762 34 40 LHA8 2500 230000 26700 4 30 110 130 1-1/2 - - - 13.2 67400 77000 762 34 40 LHA8 2780 255800 31200 4 30 110 130 1-1/2 - - - 14.0 + 380/3/50 motors are 3/4 HP 74900 90000 762 34 40 Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) 50 Hz. Data 9

Electric Defrost Capacity & Electrical Data - 50Hz. 50 Hz. Data Standard Motor Data Defrost Heaters Electric Capacity Fan Data Total Amps Total Amps Defrost BTUH / watts 380/1/50 Model 6 C TD Standard Dia. Air Throw (Ft / m) HP Wired Wired 380 380 Size -29 C SST CFM / m 3 h No. In. / mm Std w/collar Ea. 1 phase 3 phase /3/50 Watts /3/50 LHE6 450 41400 8100 2 24 60 80 1/2+ 3.4-2.6 6760 11.5 12100 23400 610 18 24 LHE6 550 50600 8100 2 24 60 80 1/2+ 3.4-2.6 6760 11.5 14800 23400 610 18 24 LHE6 640 58900 11300 3 24 60 80 1/2+ - 3.0 3.9 8800 15.0 17300 32700 610 18 24 LHE6 740 68100 11300 3 24 60 80 1/2+ - 3.0 3.9 8800 15.0 19900 32700 610 18 24 LHE6 810 74500 15100 4 24 60 80 1/2+ - 4.7 5.2 11640 20.1 21800 43800 610 18 24 LHE6 950 87400 15100 4 24 60 80 1/2+ - 4.7 5.2 11640 20.1 25600 43800 610 18 24 LHE6 1020 93800 18600 3 30 90 100 1 - - 6.9 14600 26.5 27500 53900 762 27 30 LHE6 1200 110400 18600 3 30 90 100 1 - - 6.9 14600 26.5 32300 53900 762 27 30 LHE6 1390 127900 21900 3 30 90 100 1-1/2 - - 9.9 14600 26.5 37500 63200 762 27 30 LHE6 1650 151800 23900 3 30 110 130 1-1/2 - - 10.5 22930 39.2 44500 69000 762 34 40 LHE6 2120 195000 31900 4 30 110 130 1-1/2 - - 14.0 33850 57.8 57100 92100 762 34 40 4 FPI MODELS LHL4 400 36800 8500 2 24 60 80 1/2+ 3.4-2.6 6760 11.5 10800 24500 610 18 24 LHL4 480 44200 8500 2 24 60 80 1/2+ 3.4-2.6 6760 11.5 12900 24500 610 18 24 LHL4 560 51500 11900 3 24 60 80 1/2+ - 3.0 3.9 8800 15.0 15100 34300 610 18 24 LHL4 650 59800 11900 3 24 60 80 1/2+ - 3.0 3.9 8800 15.0 17500 34300 610 18 24 LHL4 710 65300 15900 4 24 60 80 1/2+ - 4.7 5.2 11640 20.1 19100 45700 610 18 24 LHL4 840 77300 15900 4 24 60 80 1/2+ - 4.7 5.2 11640 20.1 22600 45700 610 18 24 LHL4 890 81900 19500 3 30 90 100 1 - - 6.9 14600 26.5 24000 56200 762 27 30 LHL4 1050 96600 19500 3 30 90 100 1 - - 6.9 14600 26.5 28300 56200 762 27 30 LHL4 1220 112200 22700 3 30 90 100 1-1/2 - - 9.9 14600 26.5 32900 65500 762 27 30 LHL4 1440 132500 24900 3 30 110 130 1-1/2 - - 10.5 22930 39.2 38800 71800 762 34 40 LHL4 1860 171100 33100 4 30 110 130 1-1/2 - - 14.0 33850 57.8 50100 95800 762 34 40 + 380/3/50 motors are 3/4 HP Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 10

Hot Gas Defrost Capacity & Electrical Data - 50Hz. Standard Motor Data Defrost Heaters (Std) * Hot Gas Capacity Fan Data Total Amps Total Amps Defrost BTUH / watts 220/1/50 380/1/50 Model 6 C TD Std. Dia. Air Throw (Ft. / m) HP Wired Wired Wired 380 380 Size -29 C SST CFM / m 3 h No. In./mm Std w/collar Ea. 1 phase 1 phase 3 phase /3/50 Watts /1/50 LHG6 450 41400 8100 2 24 60 80 1/2+ 6.4 3.4-2.6 1430 3.8 12100 23400 610 18 24 LHG6 550 50600 8100 2 24 60 80 1/2+ 6.4 3.4-2.6 1430 3.8 14800 23400 610 18 24 LHG6 640 58900 11300 3 24 60 80 1/2+ 9.6-3.0 3.9 1840 4.9 17300 32700 610 18 24 LHG6 740 68100 11300 3 24 60 80 1/2+ 9.6-3.0 3.9 1840 4.9 19900 32700 610 18 24 LHG6 810 74500 15100 4 24 60 80 1/2+ 12.8-4.7 5.2 2730 7.2 21800 43800 610 18 24 LHG6 950 87400 15100 4 24 60 80 1/2+ 12.8-4.7 5.2 2730 7.2 25600 43800 610 18 24 LHG6 1020 93800 18600 3 30 90 100 1 - - - 6.9 2730 7.2 27500 53900 762 27 30 LHG6 1200 110400 18600 3 30 90 100 1 - - - 6.9 2730 7.2 32300 53900 762 27 30 LHG6 1390 127900 21900 3 30 90 100 1-1/2 - - - 9.9 2730 7.2 37500 63200 762 27 30 LHG6 1650 151800 23900 3 30 110 130 1-1/2 - - - 10.5 2870 7.5 44500 69000 762 34 40 LHG6 2120 195000 31900 4 30 110 130 1-1/2 - - - 14.0 4230 11.1 57100 92100 762 34 40 4 FPI MODELS LHF4 400 36800 8500 2 24 60 80 1/2+ 6.4 3.4-2.6 1430 3.8 10800 24500 610 18 24 LHF4 480 44200 8500 2 24 60 80 1/2+ 6.4 3.4-2.6 1430 3.8 12900 24500 610 18 24 LHF4 560 51500 11900 3 24 60 80 1/2+ - - 3.0 3.9 1840 4.9 15100 34300 610 18 24 LHF4 650 59800 11900 3 24 60 80 1/2+ - - 3.0 3.9 1840 4.9 17500 34300 610 18 24 LHF4 710 65300 15900 4 24 60 80 1/2+ - - 4.7 5.2 2730 7.2 19100 45700 610 18 24 LHF4 840 77300 15900 4 24 60 80 1/2+ - - 4.7 5.2 2730 7.2 22600 45700 610 18 24 LHF4 890 81900 19500 3 30 90 100 1 - - - 6.9 2730 7.2 24000 56200 762 27 30 LHF4 1050 96600 19500 3 30 90 100 1 - - - 6.9 2730 7.2 28300 56200 762 27 30 LHF4 1220 112200 22700 3 30 90 100 1-1/2 - - - 9.9 2730 7.2 32900 65500 762 27 30 LHF4 1440 132500 24900 3 30 110 130 1-1/2 - - - 10.5 2870 7.5 38800 71800 762 34 40 LHF4 1860 171100 33100 4 30 110 130 1-1/2 - - - 14.0 4230 11.1 + : 380/3/50 motors are 3/4 HP * : Hot Gas Drain Pan Available 50100 95800 762 34 40 Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) 50 Hz. Data Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 11

Electric Defrost High CFM Capacity & Electrical Data - 50Hz. 50 Hz. Data Electric Capacity Fan Data Standard Motor Data Defrost Heaters Defrost BTUH / watts Total Amps Total Amps Model 6 C TD Std Dia. Air Throw Ft./m HP 380 380 Size -29 F SST CFM / m 3 h No. In./mm Std w/collar Ea. /3/50 Watts /3/50 LHE6 450*V 45500 10200 2 24 80 90 2 6.0 6760 11.5 13300 17300 610 24 27 LHE6 550*V 55700 10200 2 24 80 90 2 6.0 6760 11.5 16300 17300 610 24 27 LHE6 640*V 64800 14300 3 24 80 90 2 9.0 8800 15.0 19000 24300 610 24 27 LHE6 740*V 74900 14300 3 24 80 90 2 9.0 8800 15.0 21900 24300 610 24 27 LHE6 810*V 82000 19100 4 24 80 90 2 12.0 11640 20.1 24000 32500 610 24 27 LHE6 950*V 95700 19100 4 24 80 90 2 12.0 11640 20.1 28000 32500 610 24 27 LHE6 1020*V 98500 21000 3 24 100 120 3 12.3 14600 26.5 28800 35700 610 30 37 LHE6 1200*V 115900 21000 3 24 100 120 3 12.3 14600 26.5 33900 35700 610 30 37 LHE6 1390*V 134300 24500 3 24 100 120 3 12.3 14600 26.5 39300 41700 610 30 37 LHE6 1650*V 160100 26700 3 24 120 140 3 12.3 22930 39.2 46900 45400 610 37 43 LHE6 2120*V 205200 35700 4 24 120 140 3 16.4 33850 57.8 60100 60700 610 37 43 4 FPI MODELS LHL4 400*V 38600 11000 2 24 80 90 2 6.0 6760 11.5 11300 18700 610 24 27 LHL4 480*V 46400 11000 2 24 80 90 2 6.0 6760 11.5 13600 18700 610 24 27 LHL4 560*V 54100 15300 3 24 80 90 2 9.0 8800 15.0 15800 26000 610 24 27 LHL4 650*V 62800 15300 3 24 80 90 2 9.0 8800 15.0 18400 26000 610 24 27 LHL4 710*V 68600 20400 4 24 80 90 2 12.0 11640 20.1 20100 34700 610 24 27 LHL4 840*V 81100 20400 4 24 80 90 2 12.0 11640 20.1 23800 34700 610 24 27 LHL4 890*V 83900 21400 3 24 100 120 3 12.3 14600 26.5 24600 36400 610 30 37 LHL4 1050*V 99000 21400 3 24 100 120 3 12.3 14600 26.5 29000 36400 610 30 37 LHL4 1220*V 115000 29500 3 24 100 120 3 12.3 14600 26.5 33700 50200 610 30 37 LHL4 1440*V 135200 27600 3 24 120 140 3 12.3 22930 39.2 39600 46900 610 37 43 LHL4 1860*V 174800 36700 4 24 120 140 3 16.4 33850 57.8 51200 62400 610 37 43 Note: High CFM models can handle external static pressure up to 1/2 of water Note: High CFM models are designed for operation below +15 F S.S.T. Note: CFM is at 0.0 external static pressure Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 12

Hot Gas High CFM Capacity & Electrical Data - 50Hz. Hot Capacity Fan Data Standard Motor Data Drain Pan Heaters (Std.) Gas BTUH / watts Total Amps Total Amps Model 6 C TD Std Dia. Air Throw Ft./m HP 380 380 Size -29 F SST CFM / m 3 h No. In./mm Std w/collar Ea. /3/50 Watts /1/50 LHG6 450*V 45500 10200 2 24 80 90 2 6.0 1430 3.8 13300 17300 610 24 27 LHG6 550*V 55700 10200 2 24 80 90 2 6.0 1430 3.8 16300 17300 610 24 27 LHG6 640*V 64800 14300 3 24 80 90 2 9.0 1840 4.9 19000 24300 610 24 27 LHG6 740*V 74900 14300 3 24 80 90 2 9.0 1840 4.9 21900 24300 610 24 27 LHG6 810*V 82000 19100 4 24 80 90 2 12.0 2730 7.2 24000 32500 610 24 27 LHG6 950*V 95700 19100 4 24 80 90 2 12.0 2730 7.2 28000 32500 610 24 27 LHG6 1020*V 98500 21000 3 24 100 120 3 12.3 2730 7.2 28800 35700 610 30 37 LHG6 1200*V 115900 21000 3 24 100 120 3 12.3 2730 7.2 33900 35700 610 30 37 LHG6 1390*V 134300 24500 3 24 100 120 3 12.3 2730 7.2 39300 41700 610 30 37 LHG6 1650*V 160100 26700 3 24 120 140 3 12.3 2870 7.5 46900 45400 610 37 43 LHG6 2120*V 205200 35700 4 24 120 140 3 16.4 4230 11.1 60100 60700 610 37 43 4 FPI MODELS LHF4 400*V 38600 11000 2 24 80 90 2 6.0 1430 3.8 11300 18700 610 24 27 LHF4 480*V 46400 11000 2 24 80 90 2 6.0 1430 3.8 13600 18700 610 24 27 LHF4 560*V 54100 15300 3 24 80 90 2 9.0 1840 4.9 15800 26000 610 24 27 LHF4 650*V 62800 15300 3 24 80 90 2 9.0 1840 4.9 18400 26000 610 24 27 LHF4 710*V 68600 20400 4 24 80 90 2 12.0 2730 7.2 20100 34700 610 24 27 LHF4 840*V 81100 20400 4 24 80 90 2 12.0 2730 7.2 23800 34700 610 24 27 LHF4 890*V 83900 21400 3 24 100 120 3 12.3 2730 7.2 24600 36400 610 30 37 LHF4 1050*V 99000 21400 3 24 100 120 3 12.3 2730 7.2 29000 36400 610 30 37 LHF4 1220*V 115000 29500 3 24 100 120 3 12.3 2730 7.2 33700 50200 610 30 37 LHF4 1440*V 135200 27600 3 24 120 140 3 12.3 2870 7.5 39600 46900 610 37 43 LHF4 1860*V 174800 36700 4 24 120 140 3 16.4 4230 11.1 51200 62400 610 37 43 50 Hz. Data Note: High CFM models can handle external static pressure up to 1/2 of water Note: High CFM models are designed for operation below +15 S.S.T. Note: CFM is at 0.0 external static pressure Note: TD = Temperature Difference = (Room temperature - saturated suction temperature) Capacity Correction Factors for Electric and Hot Gas Defrost Units Saturated Suction Temperature F +20-10 -20-30 -40 Saturated Suction Temerature C -7-23 -29-34 -40 Multiply Capacity By 1.15 1.04 1.00 0.90 0.80 13

Physical Specifications - Air Defrost Physical Data Air Defrost Connections (Inches) Approx. Model No. of Coil External Net Wt. Size Fans Inlet Suction Equalizer Drain Lbs / kg 520 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 270 630 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 300 750 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 390 850 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 430 930 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 515 1100 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 565 1170 3 1-5/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 738 1400 3 1-5/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 800 1610 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 850 (2 conns) (2 conns) (2 conns) 390 1900 3 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1160 530 2200 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1500 680 2440 4 1-5/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1600 730 8 FPI MODELS 2160 3 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1160 530 2500 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1500 680 2780 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1600 730 120 140 180 200 230 260 330 360 14

Physical Specifications - Electric Defrost Electric Connections (Inches) Approx. Defrost No. of Coil External Net Wt. Model Size Fans Inlet Suction Equalizer Drain Lbs / kg 450 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 280 550 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 310 640 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 405 740 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 445 810 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 535 950 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 585 1020 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 753 1200 3 1-5/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 815 1390 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 865 (2 conns) (2 conns) (2 conns) 390 1650 3 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1175 530 2120 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1620 730 4 FPI MODELS 400 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 277 130 480 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 306 140 560 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 400 180 650 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 440 200 710 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 528 240 840 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 578 260 890 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 744 340 1050 3 1-5/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 805 370 1220 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 854 (2 conns) (2 conns) (2 conns) 390 1440 3 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1160 530 1860 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 1600 730 130 140 180 200 240 270 340 370 Physical Data 15

Physical Specifications - Hot Gas Defrost Hot Gas Connections (Inches) Approx. Defrost No. of Coil External Hot Gas Hot Gas Drain Pan Net Wt. Model Size Fans Inlet Suction Equalizer Drain Side Port Ref. Conn. Lbs / kg (when supplied) Physical Data 450 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 5/8 1-1/8 280 130 550 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 5/8 1-1/8 310 140 640 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 405 180 740 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 445 200 810 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 535 240 950 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 585 270 1020 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-3/8 753 340 1200 3 1-5/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 1-1/8 1-3/8 815 370 1390 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-3/8 865 (2 conns) (2 conns) (2 conns) (2 conns) 390 1650 3 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-5/8+ 1175 (2 conns) (2 conns) (2 conns) (2 conns) 530 2120 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-5/8+ 1620 (2 conns) (2 conns) (2 conns) (2 conns) 730 4 FPI MODELS 400 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 5/8 1-1/8 277 130 480 2 1-1/8 ODF 1-5/8 ODF 1/4 ODF 1-1/4 FPT 5/8 1-1/8 306 140 560 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 400 180 650 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 440 200 710 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 528 240 840 4 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-1/8 578 260 890 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-3/8 744 340 1050 3 1-5/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 1-1/8 1-3/8 805 370 1220 3 1-3/8 ODF 2-1/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-3/8 854 (2 conns) (2 conns) (2 conns) (2 conns) 390 1440 3 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-5/8+ 1160 (2 conns) (2 conns) (2 conns) (2 conns) 530 1860 4 1-3/8 ODF 2-5/8 ODF 1/4 ODF 1-1/4 FPT 7/8 1-5/8+ 1600 (2 conns) (2 conns) (2 conns) (2 conns) 730 +Opposite End Connections 16

Dimensions Figure 1. 26 1 /4 24 1 /4 C A B G F 4 9 /16 21 5 /32 29 1 /2 Refrigerant Piping End Accepts 1/2 Hanger Rod Electrical End Dimensional Data Air Defrost Electric & Hot Gas Dimensions (In / mm) Models Defrost Models 6 FPI 6 FPI 4 FPI Figure A B C F G 520 450 400 1 83 3/32 68 1/8-37 3/16 40 11/32 2111 1730-945 1025 630 550 480 1 83 3/32 68 1/8-37 3/16 40 11/32 2111 1730-945 1025 750 640 560 1 105 5/32 90 3/16 45 3/32 37 3/16 40 11/32 2671 2291 1145 945 1025 850 740 650 1 105 5/32 90 3/16 45 3/32 37 3/16 40 11/32 2671 2291 1145 945 1025 930 810 710 1 135 7/32 120 1/4 60 1/8 37 3/16 40 11/32 3435 3054 1527 945 1025 1100 950 840 1 135 7/32 120 1/4 60 1/8 37 3/16 40 11/32 3435 3054 1527 945 1025 17

Dimensions Figure 2. 35 21 /32 34 7 9 /16 C D E A B G F 23 3 /4 Dimensional Data 4 7 /16 32 41 3 /32 Refrigerant Piping End Accepts 5/8 Hanger Rod Air Defrost Electric & Hot Gas Dimensions (In / mm) Models Defrost Models Electrical End 6 FPI 8 FPI 6 FPI 4 FPI Figure A B C D E F G 1170 1020 890 2 135 13/32 120 9/32 40 3/32 80 3/16-44 1/2 50 5/16 3435 3055 1018 2037-1130 1278 1400 1200 1050 2 135 13/32 120 9/32 40 3/32 80 3/16-44 1/2 50 5/16 3439 3055 1018 2037-1130 1278 1610 1390 1220 2 135 13/32 120 9/32 40 3/32 80 3/16-50 7/32 55 13/16 3439 3055 1018 2037-1276 1418 1900 2160 1650 1440 2 142 1/2 127 25/32 42 19/32 85 3/16-50 7/32 55 13/16 3620 3246 1082 2164-1276 1418 2200 2500 2 185 1/2 170 3/8 42 19/32 85 3/16 127 25/32 44 1/2 50 5/16 4712 4328 1082 2164 3246 1130 1278 2440 2780 2120 1860 2 185 1/2 170 3/8 42 19/32 85 3/16 127 25/32 50 7/32 56 1/4 4712 4328 1082 2164 3246 1276 1429 Air Throw ELECTRIC & STD STD AIR OPT OPT AIR HOT GAS DEFROST MTR HP AIR THROW HIGH CFM HP AIR THROW MODELS RPM EA THROW w/ Collar MTR RPM EA THROW w/ Collar 6 FPI 4 FPI 450-950 400-840 850 1/2 70 85 1750 2 80 100 1020-1390 890-1220 850 1 & 1-1/2 100 120 1750 3 115 145 1650-2120 1440-1860 1140 1-1/2 120 145 1750 3 130 150 + Three Phase Motors are 1140 RPM Air throw data based on 30 ft. ceiling height with no obstructions where velocity drops to 50 fpm. 18

Replacement Parts Motor / Fan Blade / Guards Part Number Description 25305701 Motor 208-230V/ 1PH PSC 1/2 HP 850 RPM 25305801 Motor 460V/ 1PH PSC 1/2 HP 850 RPM 7072102 Motor 208-230/460V/ 3PH 3/4 HP 1140 RPM 2538000 Motor 208-230/460V/ 3PH 1 HP 850 RPM 25301701 Motor 208-230/460V/ 3PH 1-1/2 HP 850 RPM 25301801 Motor 208-230/460V/ 3PH 1-1/2 HP 1140 RPM 25307901 Motor 575V/ 3PH 1/2 HP 1140 RPM 25301901 Motor 575V/ 3PH 1-1/2 HP 850 RPM 25302001 Motor 575V/ 3PH 1-1/2 HP 1140 RPM 25301001 Motor 208-230/460V/ 3PH 1 HP 1140 RPM TE 25301101 Motor 208-230/460V/ 3PH 1-1/2 HP 1140 RPM TE 5916F Motor 208-230/460V/ 3PH 2 HP 1750 RPM 5926J Motor 208-230/460V/ 3PH 3 HP 1750 RPM 25308901 Motor 208-230/460V/3PH 1 HP 1140 RPM TE (LT) 22901101 Fan Blade 24" 850 RPM 5133C Fan Blade 24" 1140 RPM 22901201 Fan Blade 24" 1750 RPM Cast Aluminum 22900101 Fan Blade 30" 1140 RPM 22900301 Fan Blade 30" 850 RPM 22900401 Fan Blade 30" 850 RPM 22901401 Fan Blade 30" 1750 RPM Cast Aluminum 22901501 Fan Blade 30" 1140 RPM 23102202 Fan Guard 24" Blue 23102302 Fan Guard 30" Blue Replacement Parts Coil Defrost Heaters Unit Wire Lead Part Number Description Voltage Model Size Color Code 24711201 Heater 230V 1300W 208-230V & 460V 400,450,480,550 Black 24711202 Heater 230V 1700W 208-230V & 460V 560,640,650,740 Black 24711203 Heater 230V 2300W 208-230V & 460V 710,810,840,890,950,1020 Black 1050,1200,1220,1390 24711801 Heater 288V 1300W 575V 400,450,480,550 Black, Red 24711802 Heater 288V 1700W 575V 560,640,650,740 Black, Red 24711803 Heater 288V 2300W 575V 710,810,840,890,950,1020 Black, Red 1050,1200,1220,1390 23308101 Heater Clip 400-1390 24712301 Heater 230V 2100W 208-230V & 460V 1440, 1650 Black 24711403 Heater 230V 1550W 208-230V & 460V 1860, 2120 Black 24712302 Heater 288V 2100W 575V 1440, 1650 Black, Red 24712003 Heater 288V 1550W 575V 1860, 2120 Red 23307101 Heater Clip 1440-2120 19

Replacement Parts Replacement Parts Cabinet Sheet Metal Air Defrost Electric, Hot Gas Defrost Left Back Panel Model Size Model Size Drain Pan* Side Panel (Refrig. conn.) 520,630 400, 450, 480, 550 40402006 40834902 40834702 750,850 560,640,650,740 40401806 40834902 40834702 930,1100 710,810,840,950 40401406 40834902 40834702 1170,1400 890,1020,1050,1200 40402106 40868202 40868102 1610 1220, 1390 40402106 40846502 40846402 1900, 2160 1440, 1650 40410406 40858402 40858602 2200, 2500 40410704 40858202 40858502 2440,2780 1860, 2120 40410704 40858402 40858602 * includes provisions to mount drain pan heaters. Miscellaneous Components Part Number Description 4131-Y Room thermostat 4267-W Defrost termination and fan delay thermostat adjustable type 5893-Q Defrost termination thermostat adjustable type 5708-L Heater limit thermostat Note: Contact factory for hot gas defrost components not listed. Drain Pan Defrost Heaters Unit Wire Lead Part Number Description Voltage Model Size Color Code 24711301 Heater 230V 1050W 208-230V & 460V 400,450,480,550 Black 24711302 Heater 230V 1350W 208-230V & 460V 560,640,650,740 Black 24710305 Heater 230V 2000W 208-230V & 460V 710,810,840,890,950,1020 Black 1050,1200,1220,1390 24710306 Heater 230V 2100W 208-230V & 460V 1440, 1650 Black 24711402 Heater 230V 1550W 208-230V & 460V 1860, 2120 Black 24711901 Heater 288V 1050W 575V 400,450,480,550 Black, Red 24711902 Heater 288V 1350W 575V 560,640,650,740 Black, Red 24711105 Heater 575V 2000W 575V 710,810,840,890,950,1020 Black, Red 1050,1200,1220,1390 24711106 Heater 575V 2100W 575V 1440, 1650 Black, Red 24712002 Heater 288W 1550W 575V 1860, 2120 Red 20

Standard Nozzle Selections Standard Nozzle Selections TYPE No.of Fans Distributor Tube HFC-404A HCFC-22 OD Length Model No.of Circuits Nozzle* Nozzle Air 2 3/16 25.5 520 14 E-4 E-2-1/2 Defrost 2 3/16 25.5 630 14 E-5 E-3 3 3/16 25.5 750 21 C-6 C-4 3 3/16 25.5 850 28 C-6 C-4 4 3/16 25.5 930 21 C-8 C-4 4 3/16 25.5 1100 28 C-10 C-5 3 3/16 28 1170 25 C-10 C-5 3 3/16 28 1400 34 A-12 A-8 3 3/16 21.5 1610 19 x 2 C-6 x 2 C-4 x 2 3 1/4 32 1900 24 C-17 C-12 3 1/4 32 2160 19 C-20 C-12 4 1/4 32 2200 21 C-20 C-12 4 1/4 32 2440 32 A-20 A-15 4 1/4 32 2500 21 C-20 C-15 4 1/4 32 2780 24 C-25 C-17 Electric 2 3/16 25.5 400 / 450 14 E-5 E-3 Defrost 2 3/16 25.5 480 / 550 14 E-8 E-4 3 3/16 25.5 560 / 640 21 C-8 C-5 3 3/16 25.5 650 / 740 28 C-10 C-5 4 3/16 25.5 710 / 810 21 C-12 C-6 4 3/16 25.5 840 / 950 28 C-15 C-8 3 3/16 28 890 / 1020 25 C-15 C-8 3 3/16 28 1050 / 1200 34 A-17 A-10 3 3/16 21.5 1220 / 1390 19 x 2 C-10 x 2 C-5 x 2 3 1/4 32 1440 / 1650 24 C-20 C-17 4 1/4 32 1860 / 2120 32 A-30 A-20 Hot Gas 2 3/16 25.5 400 / 450 14 E-5 E-3 Defrost 2 3/16 25.5 480 / 550 14 E-6 E-4 3 3/16 25.5 560 / 640 21 C-8 C-5 3 3/16 25.5 650 / 740 28 C-10 C-5 4 3/16 25.5 710 / 810 21 C-12 C-6 4 3/16 25.5 840 / 950 28 C-12 C-8 3 3/16 28 890 / 1020 25 C-15 C-10 3 3/16 28 1050 / 1200 34 A-17 A-12 3 3/16 21.5 1220 / 1390 19 x 2 C-10 x 2 C-4 x 2 3 5/16 19.5 1440 / 1650 16 x 2 C-12 x 2 C-8 x 2 4 5/16 19.5 1860 / 2120 16 x 2 C-15 x 2 C-10 x 2 Nozzle Selections * also suitable for HFC-507, CFC-502, HFC-134a, HCFC-401A, HCFC-402A. Nozzles sized for 90-100F liquid temp. at expansion valve. Refer to I & M manual if liquid temp. is not 90-100F. Consult factory or representative if evaporator TD is not 10-15F, (room temp - saturated suction temp). Consult factory or representative for electric and hot gas defrost models when used at a saturated suction temperature greater than 0 F. CAUTION: REFRIGERATION SYSTEM WILL NOT PERFORM PROPERLY WITHOUT CORRECT NOZZLE! 21

Visit our web site at www.heatcraftrpd.com for Technical Literature Online. Since product improvement is a continuing effort at Heatcraft, we reserve the right to make changes in specifications without notice. A Brand of Heatcraft Refrigeration Products LLC 2175 West Park Place Blvd. Stone Mountain, GA 30087 770.465.5600 Fax: 770.465.5990 www.heatcraftrpd.com