R 683 683 Spertrak SPECIFICATION: Screen Size: 3660mm x 1520mm (12 x 5 ) Net Engine Power: Tier 3 / Stage IIIA: Caterpillar C4.4 111.3hp (83kW) Tier 4i / Stage IIIB: Caterpillar C4.4-110hp (82kW) Portability: Tracked or Wheeled Operating Weight: 25,000kg (54,800lbs) * With tipping grid TM
SPECIFICATION HOPPER AND GRID Hopper Capacity: 8m³ (10.5yd³) Feed height: 3.45m (11 4 ) Feed in width: 4.77m (15 8 ) (grid wing plates) Grid apertre: 100mm (4 ), 150mm (6 ) Drive: Hydralic variable speed drive via high torqe 500cc motor Beltfeeder belt width: 1.05m (42 ) Belt Spec: Plain 3 ply belt, EP500 Hopper and Grid Speed: variable, 0-16 mpm (0-53 per min) Wide moth opening MAIN CONVEYOR Drive: Hydralic variable speed drive via high torqe 630cc motor Belt width: 1m (40 ) Belt spec: Plain 3 ply belt, EP400 Belt Speed: 92 mpm (302 per min) Steel skirted fll length of conveyor SCREEN BOX Top deck: 3.66m x 1.52m (12 x 5 ) Bottom deck: 3m x 1.52m (10 x 5 ) Side tensioned top deck Hydralic end tensioned bottom deck Drive: Hydralic heavy dty 2-Bearing Screen Angle: 18-37, hydralic adjst Screen Speed: 1200 rpm Screen stroke standard: 5.5mm (1/4 ) Abrasion resistant material impact plate Spreader plate Galvanised Access catwalks on both sides and top end of screen Total screening area: 10.1m² (110ft²) SIDE CONVEYORS Drive: Hydralic variable speed drive via high torqe 500cc motor Belt width: 650mm (26 ) Belt spec: Chevron 2 ply EP250 Working Angle: 24 Speed: Variable speed, 0-103mpm (338 per min) Hydralic Folding Discharge Height: 4.72m (14 ) Stockpile capacity: 194m³ (254yd³) Screenbox with all rond catwalks access Main Conveyor Fines Conveyor Side Conveyor
FINES CONVEYOR Drive: Hydralic variable speed drive via high torqe 630cc motor Belt width: 1.2m (48 ) Belt spec: Plain, 3 ply, EP400 Working Angle: Variable 25 (Max) Rosta scraper on head drm Speed: 92 mpm (302 per min) Standard Discharge Height: 3.86m (12 8 ) Stockpile capacity: 106m³ (139yd³) POWERUNIT AND HYDRAULICS Tier 3 / Stage IIIA: Caterpillar (C4.4) Engine Power: 111.3hp (83kW) Engine Speed: 2200 rpm Tier 4i / Stage IIIB: Caterpillar (C4.4) Engine Power: 110hp (82kW) Engine Speed: 2200 rpm Pmp 1: Tandem 33cc/33cc The first section of this pmp drives either the left track or the belt feeder motor and the main conveyor motor in series The second section of this pmp drives either the right track or the fines conveyor motor and the screen motor in series Pmp 2: Tandem 29cc/29cc The first section of this pmp is split and drives the two side conveyors motors The second section of this pmp operates the vibrating/tipping grid TANK CAPACITIES Hydralic Tank: 450 litres / 99 UK gal / 119 US gal Fel Tank: 336 litres / 74 UK gal / 88 US gal UNDERCARRIAGE Shoe Width: 400mm (16") Sprocket Centres: 2.92m (9' 7") Speed: 0.9 km/h Gradeability: 27 Raking Angle: 8 Fines Conveyor User Friendly Interface Undercarriage 683 Belt Feeder
STANDARD FEATURES Tier 3 / Stage IIIA: Caterpillar C4.4-4 cylinder diesel engine developing 111.3hp (83kW) 2200 rpm Tier 4i / Stage IIIB: Caterpillar C4.4-4 cylinder diesel engine developing 110hp (82kW) @ 2200 rpm 1.05m (42 ) wide variable speed belt feeder Hopper capacity: 8.0m³ (10.5yd³) - 4.25m (14 ) wide hopper Remote control hydralic tipping reject grid c/w groser bars 4.25m x 100mm spacing (14 x 4 ) 3.66m x 1.52m (12 x 5 ) top deck screen and 3.00m x 1.52m (10 x 5 ) bottom deck screen No mesh or speedharps inclded from any deck (bt all mesh fitting parts inclded as standard) Hydralic tensioning (bottom deck screen mesh) Galvanised access catwalks to both sides and arond top of screen Screenbox reject chte (1) 1m (40 ) wide main belt Skirting on main conveyor 1.2m (48 ) wide fines belt 650mm (26 ) wide chevron belt on both side conveyors Heavy dty ndercarriage nit with 400mm wide tracks Control operation of tracks via hand-held set with 5m connection lead with heavy dty sqare connector Low level central greasing & emergency stops (4) Safety gards in compliance with machinery directive OPTIONAL EQUIPMENT Tier 3 / Stage 3A: Caterpillar C4.4-4 cylinder diesel engine developing 130hp (97kW) @ 2200 rpm Tier 4i / Stage 3B: - Caterpillar C4.4-4 cylinder diesel engine developing 131hp (98kW) @ 2200 rpm No grid bt hopper deadplate fitted 100mm Doble deck vibrating grid c/w abrasion resistant plate on wear srface of T Bars top dk and mesh in bottom deck (Incldes hopper inlet chte as standard) Remote control hydralic tipping reject grid c/w groser bars 3.65m x 100mm spacing (12 x 4 ) (Incldes hopper inlet chte as standard) Qick Wedge tensioning top deck Top deck mesh Bottom deck mesh/ speedharp Dst covers on main and fines belt Radio remote control of tracks 1nr Standard stockpiler drive - Approx 30 litres/min (only available when no vibrating grid fitted) OR 1nr Dedicated stockpiler drive - Approx 55 litres/min 68 grade hydralic oil Wheeled option available c/w Twin braked and sspended axles (Twinset Wheels), md gards, King pin towing facility & site draw bar Elect/Hyd drive - IE2 Electric motors (30kW+30kW) (not inclding wiring or electric control panel) - (IE3 Motors reqired for USA - CONTACT FACTORY FOR PRICE, AVAILABILITY AND LEAD-TIME) NOTE: WHEELED OPTION ONLY Special paint color (if different from Terex MPE White RAL1013 or Finlay Orange RAL 2002). RAL mst be specified on order R
Oversize & Middle Grade Conveyors Drive: Hydralic variable speed drive via high torqe 500cc motor Belt width: 650mm (26 ) Belt spec: Chevron 2 ply EP250 Working Angle: 24 Speed: Variable speed, 0-103 mpm (338 per min) Hydralic Folding Discharge Height: 4.72m (14 ) Stockpile capacity: 194m³ (254yd³) Hopper / Feeder Hopper Capacity: 8m³ (10.5yd³) Feed height: 3.45m (11 4 ) Feed in width: 4.77m (15 8 ) (grid wing plates) Grid apertre: 100mm (4 ), 150mm (6 ) Drive: Hydralic variable speed drive via high torqe 500cc motor Beltfeeder belt width: 1.5m (42 ) Belt Spec: Plain 3 ply belt, EP400 Speed: variable, 0-16 mpm (0-53 per min) Wide moth opening Tipping grid Undercarriage Shoe Width: 400mm (16 ) Sprocket Centres: 2.92m (9 7 ) Speed: 0.9 km/h Gradeability: 27 Raking Angle: 8 Fines conveyor Drive: Hydralic variable speed drive via high torqe 630cc motor Belt width: 1.2m (48 ) Belt spec: Plain, 3 ply, EP400 Working Angle: Variable 25 (Max) Rosta scraper on head drm Speed: variable speed, 92mpm (302 per min) Standard Discharge Height: 3.86m (12 8 ) Stockpile capacity: 106m³ (139yd³) Power nit Tier 3 / Stage IIIA: Caterpillar (4.4 ATAAC) Engine Power: 111.3hp (83kW) Engine Speed: 2200 rpm Tier 4i / Stage IIIB: Caterpillar (4.4 ATAAC) Engine Power: 111.3hp (83kW) Engine Speed: 2200 rpm Main conveyor Drive: Hydralic variable speed drive via high torqe 630cc motor Belt width: 1m (40 ) Belt spec: Plain 3 ply belt, EP400 Belt Speed: 92 mpm (302 per min) Steel skirted fll length of conveyor Oversize conveyor Screen box Top deck: 3.66m x 1.52m (12 x 5 ) Bottom deck: 3m x 1.52m (10 x 5 ) Side tensioned top deck Hydralic end tensioned bottom deck Drive: Hydralic heavy dty 2-Bearing Screen Angle: 18-37, hydralic adjst Screen Speed: 1200rpm Screen stroke standard: 5.5mm (1/4 ) Abrasion resistant material impact plate Spreader plate Access catwalks on both sides and top end of screen Total screening area: 10.1m² (110ft²)
683 TRANSPORT DIMENSIONS 15m (49 3 ) 3m (9 10 ) 3.25 m (10 8 ) WORKING DIMENSIONS 16.5 m (54 0 ) 5.30 m (17 5 ) 17.25 m (56 7 ) MACHINE WEIGHT: 25,000kg* (54,800lbs) *with tipping grid Note: Machine shown withot tipping grid (This does not affect overall working & transport dimensions)
R 3625mm (11 11 ) TRANSPORT DIMENSIONS 15010mm (49 3 ) WORKING DIMENSIONS 16465mm (54 0 ) 5711mm (18 9 ) MACHINE WEIGHT: 23,500kg* (51,810lbs)