Bodywork tool assortment. - This tool assortment (25-pieces) can be used for working in the bodywork repair area. - Universal grips for small round parts, flat parallel clamping jaws, clamping range sb 200 mm. - Grip, straight jaws, clamping range sb 35 mm. - Grip, combined jaw shape, 1 swivelling jaw, clamping range sb 16 43 mm. - Anvil dolly. - Anvil dolly, wedge shape. - Anvil dolly, finger shape. - Anvil dolly, universal. - Box files for straightening and drawing in bodywork panels. - Moulding spoon, length: 275 mm. - Moulding spoon, length: 385 mm. - Angled moulding spoon, length: 455 mm. - Folding pliers, length: 280 mm. - 1 x bodywork file holder each for flat and semicircular file blades, length: 525 mm. - 1 x bodywork file holder each coarse flat and coarse semicircular, length: 350 mm. - 2 x coarse bodywork files and 1 x fine, length: 430 mm. - Dent removal hammer, length: 309 mm. - Dent removal hammer, length: 310 mm. - Dent removal hammer, length: 325 mm. - Spot weld drill bit, 7 mm. - Spot weld drill bit, 8 mm. - Bending iron, length: 410 mm. Part number 81 64 0 446 071 National Company (NSC) or your - Building and Equipment Consulting, BV-74 1
Impact driver. - Easily operated impact driver (incl. coupling connector; nominal width 7.2) with high-performance pin impact mechanism. - Low-vibration handle insulated from cold - Exhaust air ducting downwards through the handle. - Three power levels clockwise; one power level anticlockwise. - Nm: max. 610. - Operating pressure: 6.3 bar. - Impact driver ½" 12.5 mm. - Max. break-away torque: 670 Nm. - Recommended torque: 550 Nm. - Idling speed: 7000 rpm. - Bolt size: M 16. - Air consumption: 113 l/min. - Air connection thread: 6.3 mm (1/4"). - Sound pressure level: Lp A 88 db(a). Part number 81 62 0 433 542 National Company (NSC) or your Important: Tighten wheel studs diagonally across using a calibrated torque wrench to the specified tightening torque! Building and Equipment Consulting, BV-74 2
Torque wrench. - Torque wrench system 5000-2 CT (with changeover ratchet) only for tightening wheel studs. - Fast, safe setting of the required torque by turning the handle. - Reduction in malfunctions due to integrated changeover lever with freewheel function. - Safe locking of the handle by swivel head no danger of trapping! - Essential for controlled tightening to a specific torque. - Exact (fine scale divisions), ergonomic, solid. - Safe: - By touch (short-travel triggering) - By sound (click element). Part number 81 64 2 293 917 - Square profile 12.5 mm (1/2"). - Torque range: 40 200 Nm. - Length: 513 mm. - Scale division: 0.1 Nm. - Accuracy: ±4% of scale value (in operating direction) acc. to DIN EN ISO 6789:2003 (D) National Company (NSC) or your Immediately / stock goods Building and Equipment Consulting, BV-74 3
Belt sander. - The belt sander has a variable belt speed for applications ranging from preparations for bodywork repairs demanding large removal rates, through to finely sanding sensitive surfaces. - Operating voltage: 230 115 V. - Rotation speed: 4000 10,000 rpm. - Noise level: max. 77 db(a). - Weight: 1.9 kg. - Power consumption: 500 W. - Power output: 300 W. - Belt speed: 6.5 16 m/s. - Belt length: 520 mm, 20 1/2". - Belt width: 3 19 mm, 1/8" - 3/4". - Belt thickness: up to 4 mm / up to 5/32". - Belt tensioning force, adjustable: 4 9 kg. - Vibration acc. to ISO 8662: < 2.5 m/s 2. - 1 x belt sander (230 V or 115 V). - Attachment arm, narrow. - Attachment arm, wide. Part number (230 V) 81 43 2 326 488 Part number (115 V) 81 43 2 333 873 National Company (NSC) or your Building and Equipment Consulting, BV-74 4
Recommended accessories for belt sander. Sanding belt set. - Sanding belt K60, width 19 mm (20 x). - Sanding belt K120, width 19 mm (20 x). - Sanding belt K60, width 12 mm (20 x). - Sanding belt K120, width 12 mm (20 x). - Sanding belt K120, width 6 mm (20 x). - Very fine nonwoven material, width 12 mm (20 x). Part number 81 43 2 326 493 National Company (NSC) or your Digital manual tyre inflater. - Measuring range: 0 12 bar. - Smallest display unit: 0.05 bar. - Reaction time: 0.25 seconds. - Display accuracy from 0 4 bar: < 0.08 bar. - Display accuracy from 4 10 bar: < 0.16 bar. - Weight: approx. 0.5 kg. - Index of protection: IP 54. Immediately / stock goods Part number 81 25 2 161 609 National Company (NSC) or your Promotion period: Building and Equipment Consulting, BV-74 5
Hotmelt glue gun. - The electronically controlled hotmelt glue gun must be used for gluing metal, plastic, textiles and foam materials during assembly, fixing and repair work. Benefits. - High melting performance. - Exchangeable nozzle. - Electronic temperature control by modern PTC heating technology. - Simple handling thanks to mechanical advance mechanism for glue sticks. - The glued joint is firm and load-bearing after only approx. 2 minutes. - Hotmelt glue gun in case. - Glue sticks (200 g). - Power supply: 100 240 V. - Weight: approx. 0.32 kg. - Heating-up phase: approx. 7 min. - Melting temperature: 206 C. - Glue stick diameter: 11 mm. - Max. output rate: approx. 16 g/min. - Power: 20 45 W (max. 200 W). Part number 81 69 0 399 134 National Company (NSC) or your Promotion period: Misprints, errors and colour changes reserved. Building and Equipment Consulting, BV-74 6